Database Develop

[Q] Cannot get CM6 to boot

I rooted my Sprint Hero and have been able to successfully flash and operate Fresh 2.3.3 but CANNOT figure out how to get CM6 to boot. I wiped prior to attempting the flash but all that happens is a lockup on the HTC boot screen. I have attempted to flash it twice, and waited about 20 minutes the first time and 45 the second time with no progress, eventually having to pull the battery and reboot in recovery mode. I was only able to wipe the data but when I tried to wipe the delvik cache, it told me I needed to do it via ADB. I tried to partition my SD card but it ended up cutting the available memory in half, and erasing my backup, and I had to use an external card reader to reload Fresh so that I could actually use my phone (which IS fully functional now). Should I be wiping EVERYTHING on the phone (including the battery and rotate info)? What am I missing?
I have heard nothing but great things about CM6 and am very disappointed that I cannot get it to work. Can anyone help?
Sprint HTC Hero
Firmware version: 2.1-update 1
Software version: 2.27.651.6

try wiping your ext partition

I wiped everything that the recovery menu would allow me to prior to the first attempt at flashing and it wouldn't load. I pulled the battery and rebooted to the recovery menu then partitioned the SD card, wiped just prior to the second attempt at re-flashing, re-flashed and it still locked up at the HTC screen.
I like to think I'm pretty computer savvy but I just can't figure this out. Why would Fresh 2.3.3 load without a hitch, but CM6 not?

make sure you recovery is 1.6 or 1.7 to be able to wipe dalvik i had same prob

My recommendation would be flashing the recovery in this thread here.
This the recovery I used while I was using Fresh 2.3.3, and when I upgraded to the CM6 Nigtlies.
I say Flash The Custon Amon_RA 1.7 in Darchdroid thread->NANDROID!!!!->Wipe Data->Dalvik->sd-ext(if using apps2sd)->Flash RC1 or Latest Nightly (your choice)->Flash Optionally Google Apps->Optionally Flash Uncapped Kernel and/or Battery Tweak(I use the uncapped Kernel, and not the battery tweak, and I get 24 hours+ with average use)
Try that out.

Funny, im running into the same problem after flashing the wrong blackmod... wiped, reflashed cm and now it wont go past the htc white boot screen
It did boot before though which is odd
Edit: Wiped, wiped dalvik and ext part, flashed rom and gapps, working just fine now... will flash batt tweak, bm and round clock in a min, hopefully it doesn't break it

jUgGsY,
Thank you for being so thorough in your response, it all makes sense! My only issue now is trying to re-flash the recovery image. I downloaded the RA-Darchstar image but I'm not sure if it's correctly being pushed to the SD card (all I get is a long list of ADB commands, no particular confirmation) and when I try to flash the image, I get a message telling me that it can't find the partition. What does this mean? Is the recovery image really that important to the updated ROM? How come there is no specific recovery image recommended on the CM forum?
EDIT: I found directions from the Unlockr on the youtubes. Gonna give it a try and see how it goes after that...

So it was decadence#7 kernel that was screwing up my boot... removed it and using stock darchstar

Ok... this is getting ridiculous.
*I flashed the RA-Darchstar (1.7) recovery image
*NANDROIDed
*Wiped data, cache, Dalvik and sd-ext
*Flashed RC1
*Flashed the google addon
*Rebooted
Been waiting for the damn thing to boot for almost 30 minutes now, still stuck on the HTC screen. Can anyone tell me what is going on?

jordanjackthomas said:
Ok... this is getting ridiculous.
*I flashed the RA-Darchstar (1.7) recovery image
*NANDROIDed
*Wiped data, cache, Dalvik and sd-ext
*Flashed RC1
*Flashed the google addon
*Rebooted
Been waiting for the damn thing to boot for almost 30 minutes now, still stuck on the HTC screen. Can anyone tell me what is going on?
Click to expand...
Click to collapse
Are you flashing RC1 or one of the nightly ones? I had the same issue with RC1. I could not get it to boot past the HTC screen. However, the nightly ones flash just fine. I would suggest flashing a nightly. I now see you said RC1, lol. Try the latest nightly.

It looks like I will have to go with a nightly. Are there any that you recommend? The most recent or one from a few nights back?

jordanjackthomas said:
It looks like I will have to go with a nightly. Are there any that you recommend? The most recent or one from a few nights back?
Click to expand...
Click to collapse
The latest one seem to be very good. 8/22 but make sure you download the latest google apps for it also.

For some reason, I couldn't get any variation of CM to load on my phone (CM6 or the Vanilla variant). I went with Darch's LegendROM and it is excellent - much better than stock 2.1 for the Hero! Really fast and has some neat extra features. I noticed, though, that my reception is kind of bad now and I usually have excellent coverage at my house. I already downloaded the most up-to-date Sprint radio (2.42.01.04.27) but was just curious: do I need to wipe and re-flash the image FIRST or can I just flash the radio image over the already installed ROM?
AND: Please excuse my inexperience with all of this, but I'm about to ask two already answered questions: I'm not looking for long-winded answers but if someone could point me to a relevant thread, it would be GREATLY appreciated.
1) I keep getting a "process com.google.android.googleapps has stopped working" error when I try to sync with my gmail account. How do get this to work?
2) I remember reading that there was a known MMS issue with Darch's DroidROM, not any issue with the LegendRom, but I just received a "generic network failure" message when my wife tried to send me picturemail. Is there a workaround for this?
Thank you all for your patience!

[Q] CWM flashing without ODIN

Hi,
I'm researching flashing via CWR, ROM over ROM without flashing to Stock via ODIN. Specifically, I'm at Cog 3.02 with "base" Cognition Kernel/Modem thinking about going to Andromeda...both employ Voodoo/EXT4, so shouldn't need to disable lagfix (I think?)...
I read at this link (apologies for spaces, but I'm new so can't post actual links): h t t p : / / forum.xda-developers.com/showthread.php?t=900463
a spirited debate starting about page 4 that flashing to ODIN is effectively doubling your chances for a bad flash, and that recovering a bad flash via CWM is far easier (just try re-flash again...and again(?) until fail back to trying ODIN) than recovering a bad ODIN flash.
If that's true, what prep should I do first via CWR?
1. Andromeda says requires wipe, does ROM install do this or do I do it via CWR first (wipe data/factory reset in recovery)? How 'deep' is a wipe...what do I need to save prior to this?
2. Wipe Dalvik Cache and/or wipe cache partition?
3. Save /efs folder?
4. Aside from TiBu backup to PC, am I missing anything else to save? I forgot to save my Android ID on my first flash, so it's my understanding I can only get that back via flash to Stock...I'd prefer to only go to ODIN if I have to.
Another question I had was regarding nandroid. I made a nandroid backup right after flashing to Cog. Do I really even need this? Since I haven't changed kernel/modem, wouldn't I be better off just flashing my initial Cog zip file?
Finally thanks to all who make this site kick_ss. Connexion2005's videos are indispensable for a newbie like me. People actually answer questions here, and the Devs suceed in delivering onto us a wolf in (out of the box) sheep's clothing...something AT&T and Samsung have failed to do.
Cognition 3.02 is my first and only custom ROM and DG, you have literally saved me from making my phone a brick the old fashioned way: throwing it against a wall. Running flawlessly since Jan 17th...at the same time, I am eager to see what else is out there, ***safely*** as possible.
Thanks in advance.

Since they are both ext 4 you should be ok.
The rom wipes, I clear davlik cache before flash and after, but there our no good reason as to why
Efs files, do you use kies? If so you may want to back them up, if not don't worry, I have never backed then up
Odin flash is not needed but my opinion is you should know how to use odin prior to flashing. Why panic to figure it out if something goes wrong,?
NANDROID only needed if youare going back to cog and after you have flushed the rom you want to restore settings
I think I got everything you asked

Thank you.
So really just the Dalvik cache wipe in CWR prior to.
Kies...soooo failed ever getting that working, and don't seem to need it.
Yeah I actually flashed ODIN1 unnecessarily prior to my flash to Cog. I was at stock and somehow thought ADW would mess it up...rook. I have build 1006 so good to know ODIN's there if I need it.
Re: Nandroid, but if I kept the initial zip for my flash to Cog wouldn't I just use that? Or does Nandroid do better job of ensuring good flash back to what I have right now?
Not familiar with flushing...Would I be able to restore Nandroid directly on top of ROM I'm switching off of?
Thanks again.

OP,
You'd double the chance of failure if all else were equal. I don't have statistics, but I have no doubt that failures happen far more often with odin flashes, though.
1. Andromeda says requires wipe, does ROM install do this or do I do it via CWR first (wipe data/factory reset in recovery)? How 'deep' is a wipe...what do I need to save prior to this?
2. Wipe Dalvik Cache and/or wipe cache partition?
3. Save /efs folder?
4. Aside from TiBu backup to PC, am I missing anything else to save? I forgot to save my Android ID on my first flash, so it's my understanding I can only get that back via flash to Stock...I'd prefer to only go to ODIN if I have to.
Click to expand...
Click to collapse
The ROM install script does the wipe. This simply means all your apps and data will be erased (your pictures and anything on the internal and any external sdcard will not be deleted).
I never wipe the dalvik cache or cache partition before flashing. I only do that if I'm having issues like FCs (sometimes happens after a bad theme install, for example).
You probably should have backed up /efs before flashing anything, but that's not to say a backup now isn't a good idea. You only need to do this once.
If I recall, you do need to flash 2.1 to get the ID back. I'm not 100% sure there isn't another way.
WRT the nadroid backup, you don't really need it. What I do is keep 2 or 3 good CWM flashable ROMs and the CWM update.zip on my sdcard in case of problems. I also keep TiBU backup of my stuff there (which I also occasionally backup to my PC just in case my sdcard gets wiped for some reason).
One thing I would suggest is to be sure you have working button combos in case you ever need download mode (hopefully you never will, but it's always possible). If you don't have that, there is a clockwork flashable fix or you could just flash cognition or perception once and then flash whatever you want over them (you can do both flashes all without ever leaving recovery). That should fix the button combos since DG's ROMs include a good sbl.bin (I'm not a fan of that inclusion, but it is useful in this case). Since you are running Cog, I assume your download mode is already working.

Thanks opcow.
Yeah I made sure I could get into d/l and recovery mode with button combos before I even rooted.
So would you ever use a Nandroid backup if you added a different kernel/modem to a ROM? Or would you just go back to the initial zip and SGS Kernel to flash kernel/modem? I haven't done kernel flash...yet...

Madtowndave said:
Thanks opcow.
Yeah I made sure I could get into d/l and recovery mode with button combos before I even rooted.
So would you ever use a Nandroid backup if you added a different kernel/modem to a ROM? Or would you just go back to the initial zip and SGS Kernel to flash kernel/modem? I haven't done kernel flash...yet...
Click to expand...
Click to collapse
If the ROM you were running when you backed up is compatible with the new kernel then I don't see why there would be a problem. I don't do it, myself, but I'm not sure why. Maybe it's because I have the paid TiBU and I just use that.

Thanks again...
Yeah I bought full TiBu, so obviously that should work for the apps/data.
Did some more digging tonight and apparently Nandroid backup is ROM only, not Kernel...So seemingly would need to be on same Kernel at least to do proper Nandroid restore.
...that being the case, I guess I don't understand why people stress importance of running a Nandroid prior to and/or post ROM flash...am I missing something?

If you like a rom and set everything up but want to try another doing a nandroid allows you to restore once you flash the rom again.
Also good to run nandroid on new flash, so if you play with themes and something goes wrong you can restore

That makes sense.
Showing me newbie-ness since I haven't played around with themes yet...
...Figured I'd at least get 2nd ROM flash out the shoot before playing with kernels, modems or themes...
This thread is helpful for me. I appreciate your time.

This is along the lines of the question that I was going to post so figured would ask here. I too am considering trying out the new Andromeda. I am currently using Cog 3.04 and want to test out the new Andromeda. The TiBu I have right now is from when i was on stock as I just recently purchased this and Cog was my first flash.. Would i want to continue to use that backup when i flash to andromeda, or would it be better to run a full backup with tibu while cog is on there and then flash to andromeda and use the cog backup??
also,, from above, i could possibly just skip the step with odin and go straight to andromeda? or do I need to run odin and put it back to stock before going over to andromeda?
thanks
zug

Hey Zug,
Just flashed andromeda last night via method outlined above...did not revert to stock at all (no odin). Only issue thus far is market only showing very few installed apps under 'My Apps', but I think this is a common issue. Will research solution tonight (I did have some issues getting back all apps from TiBu, but after I restored missing apps twice and rebooted a few times they all appear to be back). Also my simi clock widget comes and goes, not sure why...might clear dalvik cache to see if that helps.
Regarding TiBu, it saves apps and data. It is not ROM specific...you just back it up, then after you flash new ROM you restore missing apps with data (do NOT restore system data).
EDIT: Resolved the My Apps Market issue (only a few were showing after flash) by going to Settings, Applications, Manage, go to Market, Clear Data, reboot. Search is my friend.
i897 running Andromeda 2.0

Thanks Madtowndave.. i might give that a try.. so, since my phone is rooted and what not, i can just go to the guide and start at the portion about puting the new rom on the sd card, rebooting it and what not in recovery and select that zip and flash it right ? (well condensed version of course) and it should all be good?? guessing if this fails can always use the odin and wipe it and go back?
since i added a few new apps, guessing then that i should use tibu and go ahead and reback up everything since this rom does the master clear and then reload them right?? and hate to ask.. but how do I do the nandroid? newbie still to android and i know that just backs up the rom, but is it a app to dl from market? was fishing around in phone and didnt quite see it yet. .but figured i would do a nandroid in case i want to go back to cog.. this smart?
thnx again
zug

I think most of your questions are answered by others in this thread...
One thing I noticed last night is that I only got red (voodoo) cwm recovery menu via 3 button or long press power and reboot to recovery...when I rebooted to recovery via ROM Manager, I got the green cwm recovery menu. Not sure if this matters, but in another forum (on Vibrant phone, our sgs cousin), they said to flash ROM via the red voodoo cwm menu (since cog and andromeda both employ voodoo you can leave it enabled).
Nandroid backup you can do either from ROM manager or in cwm recovery...
Also andromeda wipes the system data, not a master clear...your data on 16 gig internal memory should not be affected, but is very good idea to backup everything to pc per the flash custom ROM guide.
i897 running Andromeda 2.0

Thanks again madtown.. going to give it a try now.. as andromeda just finished DL'ing

Good luck, hope it goes smooth for you as it seemingly has for me...Feel like a bit of a heretic for not flashing to odin first...maybe I'm just lucky.
i897 running Andromeda 2.0

hmm. ok. .so did the reboot to recovery and installed andromeda.. did it take a tad bit for yours to boot into the phone portion after it got to the andromeda screen?? mine seemed like it was hanging and was about to worry.. but finally booted in.. so figured would see if yours did too? .. gonna test stuff out now and restore tibu

Yeah, did for me too...and yes I was worried. Pretty sure this is very normal on first boot into new ROM in general. Like I said, TiBu was a bit cranky for me and required 2 restores and reboots...
Really enjoying this ROM, btw.
i897 running Andromeda 2.0

yeh.. im still doing the install from tibu (getting paid version after tomorrow since payday since im hating have to select install for every app ) .. and then will reboot and test .. though one thing ive noticed that is diff from the video is the lock screen.. in his review it was the lock button and he swiped it up.. mine is set to a puzzle piece by default?? any idea??
edit.. k mine was a 1st time go for apps restored with tibu .this is pretty nice.. it does appear to be a lot faster/smoother than cog so far.. though the Keep the lights on app should keep my bottom buttons on all the time right? least thats what i thought i was from the video and mine seem to still fade out.. even though i hit the app and it said it was enabled..

changing unlock is in settings, display...
Dunno about lights, mine just worked. Make sure service started and reboot I guess.
i897 running Andromeda 2.0

ok.. that was what it was for the lock part.. thnx .. didnt know that was there for those 4 choices.. thought only could do the none, pattern, pw etc..
everything went fine until i decided to load my contacts/sms etc from tibu.. now when i rebooted to add them, i keep getting the message "Sorry, The application Swype (processcom.swype.android.inputmethod) has stopped unexpectedly.. please try again" constantly getting things like that about swype.. any idea what happened or what i need to do?
edit.. sucked it up and re-flashed ;( will just sync contacts and deal with the ones missing for now ;(

[Q] Unable to restore ROM after installing CM7 nightly

Hey, I've been running the stock build on my rooted O2X for a while now and tried the CM7 nightly's after having a bad experience with CM7 RC1 a month-ish ago.
I backed up with CWM(via rom manager), and CM7 works fine.
But i don't like how it remaps the external storage and for some other reasons is does not work for me.
So i'm trying to go back and its not working.
It says its restored successfully but boot stays on the LG screen with the progress bar underneath. only a battery pull gets me out, which i have probably done 20 times now.
-It was initially unable to unmount /system, but after i fixed permissions that error was gone but it did not fix the problem.
- I went into advanced restore and did each one separately, they all claim to have worked successfully. but no dice
-I used back2ext3 hoping that was the root of the problem, but no luck there.
i wipe data, cache as well as dalvik every time, but still nothing.
What is up with this? is it possible that my image is corrupted or something? but why is it saying restored successfully?
CM7 nightly installs fine, so im using it in the interim, but its not optimal.
thanks for any ideas.

I bet you have an older version of CWM.
Make sure you're on at least v4 then try restoring.

Nope, im running 4.0.0.9, which is current

HELP! - Stuck booting to Recovery after trying to flash CM10 :(

Hi,
I flashed my GT-i9000 (Firmware was Gingerbread BUJVY) using CF Root (CF-Root-XW_NEE_JVH-v3.2-CWM3RFS.tar) through ODIN.
All worked fine and I was able to boot into Recovery using the regular Volume Up+Home+Power.
I then proceeded to flash CM10 nightly (23/9/12) (from my external Micro SD card) by wiping data, wiping cache and wiping Dalvik Cache.
I then navigated to the zip file for CM10 and run it. It started ok then qiuckly the phone rebooted and rebooted into a newer version of CWM (6.0.1.4).
From here I cannot do anything at all!! It won't recognise my Micro SD now to even run the installation again
I'm hoping someone may be able to help, I would really appreciate it!
TIA!

zim_zimmer said:
It started ok then qiuckly the phone rebooted and rebooted into a newer version of CWM (6.0.1.4). From here I cannot do anything at all!! It won't recognise my Micro SD now to even run the installation again
Click to expand...
Click to collapse
Do you know what version is your Firmware? is it 2.3.3 or 2.3.6?, IF its 2.3.3 your boot loader needs to be updated to 2.3.6 for you use , If its already 2.3.6, than you should be able to use CWM recovery to reinstall the CM 10 from your SD card. (But by doing this you may lose your IMEI as you should do a progressive upgrade , like from GB 2.3.6>ICS CM9>JB) or flash a semaphore JB kernel
Easiest way out would be for you to use a JVU ROM to recover, safe your EFS, than proceed to CM 9 and than to CM 10...
you can get a rescue kit or JVU+CFRoot from My Android Collections and or a solution from My Android Solutions

Hi there,
I was on Gingerbread 2.3.6 before I ran the above.
I have gotten a bit further than the above. I managed to mount the phone as a USB whilst in CWM and put the CM10 zip file on the actual phone memory. I then wiped data/cache/dalvik and rerun the install. It installed but didn’t reboot itself, so I rebooted manually and then the Cyanogenmod logo started up and it booted into CM10. Looked ok apart from the Home Button didn’t work!!
Do you think I should still run the above??
Rooting this phone and flashing ROMS is more difficult than my Galaxy S3!!
Cheers

zim_zimmer said:
Looked ok apart from the Home Button didn’t work!!
Do you think I should still run the above??
Click to expand...
Click to collapse
Since you are already on CM 10, you need to solve your home button problem, try doing a wipe in recovery, if fails, flash again the CM 10

Hmmm, it didn’t work.
What I’ve done since though is try to flash another ROM.
I’ve flashed the ‘xBean’ ROM with success, however, I did encounter the exact same problem when flashing the ROM as mentioned above
I wiped data/cache/dalvik and run the install for xBean. It stopped after the first install attempt and rebooted itself, however it just brought me back to the CWM screen (although this time different from the CM CWM).
So I wiped data/cache/dalvik, then run the install again. This time it went through the full install but again (like with CM) it didn’t rebooted automatically. I manually rebooted and then the xBean logo came up and booted in.
This time the home button is working, and pretty much everything else is too by the looks of it. So far so good!
I guess my question would be, why does the ‘ghost installs’ keep happening???

[Recovery] Unofficial TWRP 2.6.3.0 for XT901 / XT907

UNLOCKED BOOTLOADER REQUIRED
Here it is: TWRP 2.6.3.0
I've tested backing up / restore, wiping, and installing an old backup (from ver. 2.6.0.0) and all seem to work. I also included the flag "HAVE_SELINUX := true" so it should be compatible with the newer 4.3 based ROMs (needs tested).
To install:
Download and unzip file ("img" was a few bytes over the 8mb forum limit)
Code:
fastboot flash recovery XT901-XT907-TWRP-2.6.3.0-recovery.img
BUGS: I have had the screen start very dim. Sometimes restarting the recovery would fix it, otherwise go to settings / screen, and set the timeout short so it goes out. Press power to turn on and it is at full brightness.
Enjoy!!
Thanks to:
TeamWin for TWRP.
Hashcode and Dhacker for STS-Dev Team source.
Djrbliss for unlocking the bootloader & providing root in the first place.
and mattlgroff

Thank you! Just tested it briefly and it works great. Glad the recovery is finally fixed to be able to use ADB. Was unable to use any TWRPs from 2.5.0.0+ as ADB was broken in the recovery.

CM 10.2 Build removed due to errors.

jbaumert said:
OP updated with link for TWRP compiled with CM10.2 sources
Click to expand...
Click to collapse
The recovery built with the 10.2 sources seems to have an issue with mounting the internal storage and sdcard, but the 1st one built is running perfect. I made a flashable zip of the 2.6.3.0 recovery for anyone who wants to simply flash it in recovery.

@mic213, Thanks for the sanity check. Any chance you have tried backup / restore of a 4.3 build?
Sent from my XT901 using Tapatalk 4

I was able to backup with it. Still hangs at reboot.
Sent from my XT907 using Tapatalk 4

netizenmt said:
Still hangs at reboot.
Sent from my XT907 using Tapatalk 4
Click to expand...
Click to collapse
Do you mean when you reboot from TWRP? I noticed that on other builds, but didn't think much of it.

Recovery Tools is a free app on Google Play. Simply download the Recovery IMG. file from this post, and then open the Recovery Tools app. Grant it root, and now you can simply flash the img. file from the app without having to go into fastboot or compress the file into a flash able zip. Once recovery is flashed phone will reboot into whichever recovery is the most recently flashed. About as basic and straight forward as can be.
---------- Post added at 09:34 PM ---------- Previous post was at 09:22 PM ----------
The recovery file works great, only bug after about 4 days of use would be the dim menu screen in recovery. Still very readable even when bug pops up. Thanks for the great upload

Thanks. I could never get 4.3 to reboot past the initial boot after install, and now it finally does.

scottocs said:
Thanks. I could never get 4.3 to reboot past the initial boot after install, and now it finally does.
Edit....ehh maybe. Still working on it.
Click to expand...
Click to collapse
just make sure everything is wiped and that you are using 4.3 Gapps, also look up the SuperSU 1.65 update, some people have had trouble keeping root when rebooting into 4.3. Flash 4.3 ROM then GAPPS followed by SuperSU update, I would suggest running 4.3 on TWRP 2.5 or 2,6 first. Once your able to run 4.3 on one of those, then good ahead and try flashing 2.6.3. If anything on your phone is 4.2 and trying to load onto 4.3 it will never make it far past the boot screen.

Edited because I started rambling and couldn't delete.
Long story short, I have been having issues wiping, installing, and recovering.
I was flashing from a 4.3 ROM to another 4.3 ROM and decided it would be a good idea to wipe internal. Messed me up good.
I went back to 4.2 finally fixed booting issue on getting stuck at boot image. (Wasn't even making it to the boot animation.) I'll wipe everything except internal like I did before and go from 4.2 to 4.3. Last time I did this I didn't have issues.

motoroid7 said:
I'm not sure what I did, but some ROMs suggest that you wipe internal memory. I did this but now I have the issue after installing a ROM and booting it up... playing with it, if I then go to reboot the phone at all I just get stuck on my boot image (not the animation.) This happens on regardless of what ROM I've installed.
I also now can't go back to my backups. They fail on restoring. [Most recent backup was made on 2.5.0.0, previous to that 2.3.2.3]
How do I fix my phone? I'm wondering if I need to fxz back to a rooted stock ROM to fix what's going on?
Click to expand...
Click to collapse
This happened to me on TWRP too. When I went to restore, it say that it failed. However, I decided to boot into system anyway. TWRP gave me a warning that no OS was installed but I went ahead and rebooted. It booted into my backed up ROM just fine but it needed to be set up, like I just had flashed it. Basically, the restore process restored everything but my data. I did a barebones set up then booted back into recovery and went to restore the same exact ROM. This time, I got my complete ROM, just as I had saved it. This is kind of a long process, but it's better than having to FXZ or using a utility to go back to stock.

RikRong said:
This happened to me on TWRP too. When I went to restore, it say that it failed. However, I decided to boot into system anyway. TWRP gave me a warning that no OS was installed but I went ahead and rebooted. It booted into my backed up ROM just fine but it needed to be set up, like I just had flashed it. Basically, the restore process restored everything but my data. I did a barebones set up then booted back into recovery and went to restore the same exact ROM. This time, I got my complete ROM, just as I had saved it. This is kind of a long process, but it's better than having to FXZ or using a utility to go back to stock.
Click to expand...
Click to collapse
It's too bad I can't seem to locate the delete button on these posts, I'll go ahead and edit it. I was finally able to flash LiquidSmooth v2.9 (Android 4.2). It finally booted up, I just went back in and flashed gapps. It restarted fine. The real test is going to see if I go to hit a regular reboot and it boots up normally again. If that's the case I'm fixed. I would like to flash back to SlimROM that I had, but it seems that's going to probably be difficult without it messing up again. Not sure what to do if it does again. I won't be wiping internal memory anymore. I didn't have issues going from 4.2 to 4.3 when I didn't do it.
Any idea why I get a funky e:error: unknown media 'datamedia' error all the time in TWRP? I've had that error since like v2.3.x.x

motoroid7 said:
It's too bad I can't seem to locate the delete button on these posts, I'll go ahead and edit it. I was finally able to flash LiquidSmooth v2.9 (Android 4.2). It finally booted up, I just went back in and flashed gapps. It restarted fine. The real test is going to see if I go to hit a regular reboot and it boots up normally again. If that's the case I'm fixed. I would like to flash back to SlimROM that I had, but it seems that's going to probably be difficult without it messing up again. Not sure what to do if it does again. I won't be wiping internal memory anymore. I didn't have issues going from 4.2 to 4.3 when I didn't do it.
Any idea why I get a funky e:error: unknown media 'datamedia' error all the time in TWRP? I've had that error since like v2.3.x.x
Click to expand...
Click to collapse
Not 100% sure, but i believe that when you wiped your internal memory on 4.3 you deleted the ROOT. SuperSU seems to be having issues with
carrying over root on 4.3 to some peoples devices, Ive had to flash SuperSU update 1.65 from recovery otherwise when ROM boots up I get stuck in a cycle of SU Binary update/reboot. Also make sure that in Developer Options in your custom ROM, that Root Access is set to APPS and ADB and the same in SuperSU - APPS/ADB. Now to clarify I may be merging two unrelated issues together. If so, my bad lol.. But from my experience running PaCMan 4.3 since August, and now running TWRPS 2.6.3 since OP , 4.3 ROOT will not revert back to 4.2 unless Recovery is included in the backup. One final suggestion, try flashing the boot.img from 4.2 before flashing your 4.2 restore. I was able to revert back to 4.1 restores when I upgraded to 4.2 but while running 4.2 I deleted the Root Data from Internal Storage, I strongly suggest looking up arrrghhhs Sept. 15th Kernal for XT 926 which runs the same for XT 907. It damn near all the way current with CM 10.2 merges, should make running which ever 4.3 ROM you want much easier. If you want to run a 4.2 Rom , look up arrrghhhs 10.1 kernal version.
Arrrghhhs xt926/907 kernal

Kyles1329 said:
Not 100% sure, but i believe that when you wiped your internal memory on 4.3 you deleted the ROOT. SuperSU seems to be having issues with
carrying over root on 4.3 to some peoples devices, Ive had to flash SuperSU update 1.65 from recovery otherwise when ROM boots up I get stuck in a cycle of SU Binary update/reboot. Also make sure that in Developer Options in your custom ROM, that Root Access is set to APPS and ADB and the same in SuperSU - APPS/ADB. Now to clarify I may be merging two unrelated issues together. If so, my bad lol.. But from my experience running PaCMan 4.3 since August, and now running TWRPS 2.6.3 since OP , 4.3 ROOT will not revert back to 4.2 unless Recovery is included in the backup. One final suggestion, try flashing the boot.img from 4.2 before flashing your 4.2 restore. I was able to revert back to 4.1 restores when I upgraded to 4.2 but while running 4.2 I deleted the Root Data from Internal Storage, I strongly suggest looking up arrrghhhs Sept. 15th Kernal for XT 926 which runs the same for XT 907. It damn near all the way current with CM 10.2 merges, should make running which ever 4.3 ROM you want much easier. If you want to run a 4.2 Rom , look up arrrghhhs 10.1 kernal version.
Arrrghhhs xt926/907 kernal
Click to expand...
Click to collapse
To piggy back on general advice: I found I was having all sorts of problems going from 4.2 to 4.3. What finally did the trick was I wiped Dalvik, System, Cache AND I formatted data. The formatting was what did the trick.

When you wipe in twrp 2.5+ the recovery does not delete data/cache from internal (system) unless user mounts system prior to wipe. Wiping system cache, data, and dalvik cache is a full system wipe. Recommended if switching ROM rather than flashing nightly. This way no files from a AOKP ROM stick around and try to associate with your new CM based ROM.
Sent from my XT907 using Tapatalk 2

Thanks for the advice guys.
I was finally able to successfully getting my phone to work again last night (very early in the AM). It's very strange. I actually had 0 issues going from LiquidSmooth v2.9 to LiquidSmooth v3.0 (4.2 to 4.3). Though it was from the same dev could be part of it. It wasn't until I tried flashing from SlimROM/4.3 to CM10.2 nightly (where I wiped internal memory requiring me to type "yes".) Another thing is strange is even though it was saying I lost root in TWRP, I'm not sure that I ever did, unless TWRP just re-installed it when I reboot recovery automatically... because I finally told it no when asked if I wanted to re-install root? Then I was finally able to get LiquidSmooth v2.9 bootable and stable.
Again, thanks for all the help guys. I just wish I had a little bit understanding what I all did to finally get it to boot up. It was pretty early in the morning... going on 5/6AM. So I was pretty tired doing all of this. I just knew I couldn't let my phone not be up and running by morning.

I did a backup last night, flashed a 4.3 ROM which had reboot issues, and then restored with this version. I had zero issues, unlike when I was trying to restore with the previous version. Thank-you for your work.

It works with the xt902 too. Thanks!

What's the difference between the link in the first post and the one in the fourth? One of the is broken? Which one has been built with the CM10.2 sources?
I'm using a CM10.2 ROM... Which one should I peek?
Thanks!