Database Develop

Blackberry Connect on S730

Hi,
Please can someone talk me through trying to get BB Connect 4 working with the new HTC S730 (Wings)?
I'm trying to move across from a BlackBerry Pearl, so I know my subscription with my operator (Telenor Sweden) is working just fine.
I've tried using BBC 4.0.0.76 and 4.0.0.84 for WM6 Standard.
I enter BBC app on the phone and click Menu > Register Now. Back on the home page the BB status changes from Not Connected > Network Available > Data Tunnel Available > Not Connected. I have no PIN (Pending) and no IP.
I also tried BBC 2.1.2.39 but this just stays at Not Connected. Any idea why this is not working, since BBC 2 is not supposed to be so fussy about checking if the device is supported?
When I try to connect with the BBC Desktop software, it says PIN is "Unknown Type"
So....
I'm guessing the S730 isn't certified by RIM yet and I need to trick BBC 4 into thinking it's running on a supported device.
Please can someone help with the correct steps? Here are some of my questions:
1. I have the S730 Nordic version so I guess the first thing I need to do is dump the ROM from my own device. Am I better off using the grab_it ROM dumper from here - http://forum.xda-developers.com/showthread.php?t=238945 or using this method http://wiki.xda-developers.com/index...x_HowToDumpRom ? I'm struggling so far with the pdocread method as I my device seems to be application locked. I'll post more about this in the S730 ROM thread.
2. Assuming I get the ROM dump, I need to use a Hex Editor to change the GetDeviceInfo from HTC-Wings ( I guess) to a supported device. Can anyone tell me the best device to change this to e.g. HTC-Vox? I've read reports of BBC 4.0 working on the S710 Vox but also people have asked for help hacking it. Which device string should I use?
3. I'm a complete noob when it comes to repacking ROMs and flashing WM devices. Can anyone point me to step-by-step guide to this?
I've tried to read around this subject but I've quickly exceeded my technical comfort zone to put it mildly, so any help with this would be really appreciated!

You carrier needs to support the Blackberry Gateway forwarding. If it does not, from your device, then Blackberry Connect will not work. They literally need to sort of "open ports" on their system.
I tried a Blackberry Connect activation on a Samsung BlackJack II, on AT&T here in the states, with no luck. Same symptoms as you describe.
Read all of the comments here to see what other people have done.
Oh well... get your peoples to enable ActiveSync on your server. Or at least to forward your Email to an outside address.
Good luck,
Matt

I'm not ready to give up on the S730 and BB Connect just yet.
My operator supports BB Connect on Sony Ericsson and Nokia smartphones but say there is no reason why HTC models shouldn't work. I have a colleague with a HTC Tytn II, also with Telenor connecting perfectly with my company BES, so there is some hope.
The hack described in this thread http://forum.xda-developers.com/showthread.php?t=294218 basically tricks BBC into thinking it's running on a device which is supported by RIM and your operator. That's what I'm trying to do. That's where I was going with my questions.
But I don't know a) how to dump my ROM b) what devicetype value to set and c) how to repack the ROM and reflash the device.
Has anyone else tried the same thing and can help a noob like me?
bigflavor said:
Oh well... get your peoples to enable ActiveSync on your server. Or at least to forward your Email to an outside address.
Click to expand...
Click to collapse
Not an option for me, unfortunately. My company only support BES and so either I get BBC working or the S730 goes up on ebay. I'm back to using my Pearl until I get this working.

Is there anyone else out there trying to get BlackBerry Connect working on the S730?

also trying for BB connect
I just tried to install three different version yesterday with no success.
4.0.0.76 (wm5 version)
4.0.0.84 (wm6)
4.0.0.91 (wm6)
http://www.sems.org/entry.asp?ENTRY_ID=276
They all installed properly but did not generate a PIN number, it was stuck at "PIN pending".
It went thru the same sequence "Network Available" --> "Data Tunnel Available" --> "Not Connected"
have not tried version 2.1 yet will do that shortly

Tried 2.1
update:
Tried 2.1 on the s730, it does not function.
If anyone has anymore ideas please post, and i will try it .

I know this is a separate platform, but perhaps bbconnect for the HTC tilt might work. AT&T have it available here http://www.america.htc.com/mobile/connect/8925/

Has anyone tried emoze as a push solution?

Has anyone found a working BB Client for BB Internet Service for The S730?

I see over the years ... nobody read carefull Threads!
Black Berry is a complicate and secure Application!
How they generate a Pin?
The Device Name, Device OS Version and Build Nr. are for the generation importent. It means ... if your modded os have a wrong OS Version and Build Nr. you doesnt get a Pin and you see every time "Pin pending"
How i can fix this?
Try to use a Original HTC Rom. If you get Pin Pending again ... try to reg edit your Build Nr. If its work, you have the right version Nr.s you need and Build Nr.! Then you can ask you favorit Rom Builder for changing does numbers.
Use Black Berry Connect Clients over 4.0.0.90
If you know the right ids ... publish it!

But where can I get the right rom for my HTC S730 and where can I get a BB client over 4.0.0.90

Original Rom ... www.htc.com -> eMember
Black Berry Client ... netrunnerat.4shared.com -> tools

NetrunnerAT said:
Original Rom ... www.htc.com -> eMember
Black Berry Client ... netrunnerat.4shared.com -> tools
Click to expand...
Click to collapse
That's a cool site. Thanks.
Also, did you test this on the S730 with your theory?

It dosn't work. No PIN.
New Ideas ?

your carrier needs to allow your phone to access the Blackberry servers. It's a provisioning thing. Call them and try to get it added... try to convince them just to add it and see what happens, even if you don't have a Blackberry. They might have a special thing... like AT&T's Tilt has the ability to use blackberry connect, so AT&T probably has some special feature for provisioning that enables a non-blackberry phone to be provisioned for blackberry service.
Without this connection allowed by your carrier connecting you to RIM's servers... Blackberry Connect will not work.
Prove me wrong. (seriously, because I want to get this working for myself )

I have the blackberry connect service activated for my s730 but can not get a pin number. I will try different versions, if anyone has anymore ideas please post
Thanks

O2 payandgo settings for Diamond - What's the problem with O2 ??

I can't understand why so simple things cannot be resolved in the life.
I can understand that an operator can decide to don't give some feature, but for what I understood the things should be like this:
1. all UK operators like 3, vodafone, t-mobile offers access to internet for pay and go customers. O2 says not, or that a lot of mobiles do not support it.
Now. I was with polaris/touch cruise able to surf with explorer and use google maps, just problems to update the weather in the main screen. And was ok for me.
Now, I switch to Diamond, the result? i cannot surf anymore and use google maps! Now the answer should be to swith to 3, but I needed O2 and is problematic to switch. Of course I will do if I won't find a solution.
So my question is, have you found a solution to surf and use google maps with O2 payandgo even on the Diamond?
if not, I'm stupid or how is possible that in 2008 a device should be not able to connect to service of O2, I mean, how is possible that O2 says that is the device not supported or that don't support them etc etc, I mean, who is wrong here, is O2 that is doing the possible to don't give this service to us or what? if is so, nobody did something to sign a petition and ask them to do what their competitors do, even more expensively, but with every UK operator is possible to surf, why just with O2 not!!!! Payandgo.
Let me know please.
if I need to flash the ROM, change, upgrade, or whatever you want to let it work let me know.
Thank you in advance,
your disperately,
payandgo... go.. go..

I would check your setting are the same as when you had the polaris/touch cruise, other than that you really need to change operator

Usually for paygo they route the internet using a different APN. This is usually because they block certain ports.
The operators usually say 'this device isnt suported' because their automatic system isnt able to SMS the provisioning to your phone. That doesnt mean you can't edit it manually.
Just copy the connection settings from another phone where it works onto your diamond.
It sounds like the auto setup in the diamond is using some different APN or a proxy, and your old device didnt.

of course I do manual settings... cannot work with the automatic that are into the htc.
I'm waiting some angel here of the forum that can help, for sure a lot of londiners are facing same problem with O2 and have some solution.

the exact same settings work fine on which other phone?
Or are you saying it just doesnt work any more no matter what phone you use?

Htc Touch Pro was working but I lost the settings and with the one found in forums doesnt work the Diamond
so I need settings from somebody that setted already the Diamond that is new, and for sure are the same but I do not have it and I need to find so I can set it manually.

Have you tried these?
http://www.filesaveas.com/gprs.html
Both contract and paygo. Also it really would help if you gave some more information like what settings you using already.
This is my third post and i still have no idea what your exact problem is. Yeah sure you can't get GPRS working in some way, but i don't know what way, and what settings your using - and so the possible cause.

Help for my father!

Hi guys, I am posting here just to solve one issue of my father's diamond.
I have one raphael, my father got a diamond, and it is different on provider informations.
My raphael automatically detects the provider's configuration, installing it on connections, I tryied it with my father's diamond, and his diamond doesnt take the provider's information, I dont know why. So, I have just configured it by my hand manually, using the necessary informations, all ok, it worked fine, he can work on internet, but the problem is that all times he power on his phone, come the warning that is trying to take provider's information, and automatically goes to the connections on settings tab, its a warning, I think that the cell phone doesnt detect that it is manually typed, and try again with a global icon on hardware's tasks.
Once I have already configured it, I would like to KILL this warning, he is a big disapointed with it, that appears sometimes.
Thanks for now

Hi....first of all...I am not an expert! I think the solution might be to go to 1) Settings......2)Connections and click on the connection setup symbol, (if you have it) this should set it up for you.....hope this helps

It the PDA goes automatically, but always repeat when i power on the phone

the last answer:flash the other rom

I will find it, but I dont know if I is easy to locate the portuguese rom as it is installed on his fone

problems with email, icq and wlan

hi!
i'm a newbie @ this forum, so i hope that these questions are ok to ask & my english isn't the worst..
i'm from germany and i got the touch diamond from vodafone in germany..
now i've got 3 problems..
1. if i want to sync emails with my gmx account (pop3) i got a message, that i'm not able to sync it.. "synchronisation problem" maybe it's because the proxy doesn't allow that? i got a imap email account from vodafone too, and there are no problems.. is somebody there who has the same provider or problem?
2. i got qip for the diamond and i can't get a connection to the icq network. "connection timeout" or something like that is the message i get. i tested a lot of icq clients, and i use not the newest version of qip because in this version i'm able to set the proxy, where i set the settings like my connection settings from the windows mobile device.. i've heard, that some vodafone users get this started with my version & my settings, so maybe its somebody here who get this started too.
i think 1 & 2 are the same problem, there must be a mistake in the connection settings.. maybe there is no solution, i searched @ the whole web for weeks & nothing is usefull.. it's strange that i can use the vodafone live portal & google and everything else on port 80..
now there is still the problem 3, its the most important for me..
3. if i go to the standby-mode (the small button on the top of the phone^^) and it's in standby for a while, the damn wlan connection is turning on!!! its really bad, because the battery is empty after a short while. is there a way to disable the automatic wlan connection? after that i always have to go to >settings>connection manger and have to disable wlan.. i installed the advanced settings (i think i got it from here) and enabled a lot of power management settings, and if wlan doesn't turn on, my battery works for 1,5 days (if i doesn't access the internet and play with the phone).. this is a really bad disadvantage @ the phone.. if wlan is turning on the battery is empty after a few hours..
by the way, has somebody a tip for me to get the phone turned on for longer? and whats the record running time? xD
thank you before & i have to say...
.. this forum is the best for windows mobile devices!!! i got a lot of software from here
it's really impressive

Can't access internet on My Wizard

Hello all.
I first want to say that I have read this forum until I thought My eyes would bleed before posting any question.
I have a cingular 8125 (Wizard) that I recently upgraded to CR96 Touch HD Version 6.5.0.1.7 RC3 and I love the rom for the most part.
After installing it, I had internet access until just a few days ago. I assumed that it was that I was still running the old Cingular config file Cingular_Wap_Medianet_MMS_Settings.cab file that I have used for years, and maybe AT&T was trying to get rid of there old settings. I have searched the site, and searched for the settings to configure the connection.
I did not find a cab file for the wizard, but found the settings and manually entered them. I could not connect, nor could I access the internet.
I then located the htc HTC_Network_Wizard_Kaiser.CAB file, and tried running it, and could not find where it installed a program to run, nor did I see that it configured a connection for me. So, Back to reading.
I finally found an AT&T_Wap_MEdiaNet_MMS_Settings.cab file that actually allowed my phone to connect to the internet for my e-mail from my work. I still however cannot access the web. I thought maybe it was caused by an registry setting that I changed trying to move the bulk of my mail to the SD card. So, I did a hard re-set on the phone. I still however am only able to get the e-mail without web browsing access.
I have not been able to locate another person that has had this issue. Please help.
Liquidd
I also want to say that I have 90% signal strength, and am still unable to connect to the web.
does anyone know where I can find the ]HTC_Network_Wizard for the Wizard phone?

Does this mean that no one knows, or that I just did not ask correctly?
Could someone please send me the HTC_Network_Wizard for the Wizard file? I will beg if needed.
Liquidd