Database Develop

[Q] whats this? i9001 bricked, damaged partition? cant wipe data, do factory reset.

Hi people,
i dont know where to go! i have read dozen of sites and post... am i right here?
my S+ i9001
PDA i9001xxkq7
Phone: i9001xxkpk
csc i9001dbtkp2
can:
boot in download mode
can boot recovery mode
can be flashed via odin
can NOT:
-boot to system (always hang or freeeze or shuts down when Samsung logo comes)
-data can not be wiped (Processbar starts but never really start doing something) CWM6. I had some other recoverys and they gave me some messages like can not accsess data/csc or something like these messages in other posts.
-can not do anything in recoverymode exepted, wipe cache.
-can not update zip
-can not gain accsess to sdcard ore sideby
-cant reboot in recovery.
i flashed with odin (and Aries.ops):
-broodROM_RC5
-the right StockROM
-phone seems to be bricked
-no access with Quickflash (dont know if debug mode was or is enabled)
i found some people with similar problems with other devices (i9000 // i9100), but not with the i9001. so i write it here.
always the answer was try a full wipe/reset, but i cant or dont know how to it when the recoverymod or stock recovery doesnt do it.
kind regards
Daniel
im Stuck! where do i have to start further steps?

incredibledan said:
Hi people,
i dont know where to go! i have read dozen of sites and post... am i right here?
my S+ i9001
PDA i9001xxkq7
Phone: i9001xxkpk
csc i9001dbtkp2
can:
boot in download mode
can boot recovery mode
can be flashed via odin
can NOT:
-boot to system (always hang or freeeze or shuts down when Samsung logo comes)
-data can not be wiped (Processbar starts but never really start doing something) CWM6. I had some other recoverys and they gave me some messages like can not accsess data/csc or something like these messages in other posts.
-can not do anything in recoverymode exepted, wipe cache.
-can not update zip
-can not gain accsess to sdcard ore sideby
-cant reboot in recovery.
i flashed with odin (and Aries.ops):
-broodROM_RC5
-the right StockROM
-phone seems to be bricked
-no access with Quickflash (dont know if debug mode was or is enabled)
i found some people with similar problems with other devices (i9000 // i9100), but not with the i9001. so i write it here.
always the answer was try a full wipe/reset, but i cant or dont know how to it when the recoverymod or stock recovery doesnt do it.
kind regards
Daniel
im Stuck! where do i have to start further steps?
Click to expand...
Click to collapse
+1
---------- Post added at 03:48 PM ---------- Previous post was at 03:03 PM ----------
The Same problem with my phone!!
I tried every thing every cwm recoveries and root stock rom and broodrom no boot
Please somebody can help us?
Thank you

I9001 cant format data and emmc
Update,
i finally got an CWM running! aktually 5.5.0.4 but the 6.0.1 and 6.0.2 alsoworked at the end.
now all i cant do is, formatting data and/or mount/format emmc.
Plugged in via USB Cable to PC i can access (internal) sdcard and copy all zips i want. I also cann install them, but i cant wipe data.
i geuss there is an hardware issue, so that all these fine mods are biting on stone, trying to format the "partition"
This results in unbootable systems..i think
At least i tried cm-9-20130220-EXPERIMENTAL-ariesve-rc5 with kernel 3.00, no luck.
i this hardbricked? damaged? i geuss im close to the final. but wich one.....
last try is this hint :http://forum.xda-developers.com/showthread.php?t=2173180
but ODIN crashes when trying the MD5 checksum
thanks for reading!
dan

...
tried to reduce the i9001reset.tar.md5 file with repacking it without the cache and system file. but the reset.zip still has 750mb and odin crashes checking the md5.
are there any other methods to check if the data partition or the emmc.ic is damaged? i cant format via CWM or stock recovery, results in endless process...
and Quickflasher also crashed trying to "wipe at start" mmcblk0p17 (data)
greetz from Berlin
Dan

samen problem
I got the samen problem, please some help. (10 hours working on it
I dit odin to stock
odin to recovery 6
formated sd
installed roms
nothing works, cant mount, cant wipe date,
Has it to do something with .ext (i dunno this really and dunno how to change

did you try to wipe data from stock recovery after install stock rom?
Sent from my GT-I9001 using xda app-developers app

danger
ATTENTION dont try the reset.zip partition recovery as described above! It has killed my phone! i lost any lifesigns from the device, no vital functions over the battery or powersupply. i just cant switch it on again.
this is my end with this!

macar said:
did you try to wipe data from stock recovery after install stock rom?
Sent from my GT-I9001 using xda app-developers app
Click to expand...
Click to collapse
yes, i tried but it did not work, neither from stock or custom ROM.

I'm having the exact same problems. It all started when I updated CWM to 6.0.2.8 as recomended by ivendor, in order to flash CM10. Since then I can't wipe data partition, and no matter what I flash (through both Odin and CWM), the phone doesn't boot anymore. Tried to restore original Samsung ROM, no success... Hasn't anyone figure it out? It seems a large number of user have dealt with this issue in the last days, perhaps the coder of CWM 6.0.2.8 should explain how to fix this mess.
I went to a local phone service, and they said they can't do anything, the whole internal memory has to be replaced. I can't believe this.

No solution?
I have exectly the same problem and i tried everything. I still can get to recovery and download mode, because i didnt mess with reseting broken partition. Can this be solved? I didnt find anyhing in threads, and it seems that a lot of people have this kind of problem now. It all happend on my s+ while i was trying to flash CM10 Beta4.

repair in warranty
Ledo13 said:
I have exectly the same problem and i tried everything. I still can get to recovery and download mode, because i didnt mess with reseting broken partition. Can this be solved? I didnt find anyhing in threads, and it seems that a lot of people have this kind of problem now. It all happend on my s+ while i was trying to flash CM10 Beta4.
Click to expand...
Click to collapse
OK Guys,
here im back. After killing the phone i called samsung i (i was still in warranty), an then i send it to an repair center of their choice. it tooks two weeks an here i got it back. dont know what they have done. but it didnt cost me anything.
end of story from me
greetz dan

search for emmc bug thread in development section http://forum.xda-developers.com/showthread.php?t=2224029
the recovery you have used was compiled over a 3.0 kernel, it has a bug that brick phones, like the galaxy s2 and galaxy note.

New motherboard
incredibledan said:
OK Guys,
here im back. After killing the phone i called samsung i (i was still in warranty), an then i send it to an repair center of their choice. it tooks two weeks an here i got it back. dont know what they have done. but it didnt cost me anything.
end of story from me
greetz dan
Click to expand...
Click to collapse
I got my phone back from service in a 4 days and they changed my motherboard. Now I have completely new motherboard (plus I didnt pay a thing because I still got warranty). Obviously they didn't find out whats wrong with my phone so they put new motherboard

Ledo13 said:
I got my phone back from service in a 4 days and they changed my motherboard. Now I have completely new motherboard (plus I didnt pay a thing because I still got warranty). Obviously they didn't find out whats wrong with my phone so they put new motherboard
Click to expand...
Click to collapse
I managed to "rescue" my eMMC-bricked phone by doing everything I could find about the eMMC brick bug killed my i9001. No root but I can live with that until someone comes up with a better fix.. Good luck, I wish I had a better step by step instruction list on how I did it but honestly I just frantically tried things over and over in different order and finally got it going.
http://forum.xda-developers.com/showthread.php?t=2234489
I guess...
1. Get TWRP 2.2.2.1 or CWM 5.5.0.4/the new 2.6-based 6.0.2.8 CWM recovery flashed.
2. Use QuickWipe (link in my post to the OP).
3. Use ODIN 4.43 to flash that 1.4GB fixmev2.tar file (I did it at least 2-3 times during different stages)
4. Follow the instructions in the links in my post.
5. Good luck.
6. Wait for the devs to solve this problem permanently with new kernels and ROMs and thank them when they solve it.

Scyphe said:
I managed to "rescue" my eMMC-bricked phone by doing everything I could find about the eMMC brick bug killed my i9001. No root but I can live with that until someone comes up with a better fix.. Good luck, I wish I had a better step by step instruction list on how I did it but honestly I just frantically tried things over and over in different order and finally got it going.
http://forum.xda-developers.com/showthread.php?t=2234489
I guess...
1. Get TWRP 2.2.2.1 or CWM 5.5.0.4/the new 2.6-based 6.0.2.8 CWM recovery flashed.
2. Use QuickWipe (link in my post to the OP).
3. Use ODIN 4.43 to flash that 1.4GB fixmev2.tar file (I did it at least 2-3 times during different stages)
4. Follow the instructions in the links in my post.
5. Good luck.
6. Wait for the devs to solve this problem permanently with new kernels and ROMs and thank them when they solve it.
Click to expand...
Click to collapse
EDIT: after it died last night (tried to force root permissions and it would no longer boot) and fiddling to get it back to working condition I tried flashing the file in this post (http://forum.xda-developers.com/showpost.php?p=38671295&postcount=2) to reset partitions and the phone is now stone dead... a true brick.. absolutely nothing happens when I try to power up, enter recovery mode, whatever.. it's dead... stone cold..

[Q] My S3 Mini is stuck on the first screen and won't boot!

Hello,
Today my phone was functioning normally until I decided to launch a game (Jewels Star or something like that) that I always play normally.
But today when I entered it the phone froze and shut down by itself and now everytime I try to turn it on it gets stuck on the first screen that appears! (Samsung Galaxy S III mini GT-I8190)
My phone is not rooted and no Rom is flashed. I haven't done anything to it.
What can I do to fix the problem?! Please help!!

AytchG said:
Hello,
Today my phone was functioning normally until I decided to launch a game (Jewels Star or something like that) that I always play normally.
But today when I entered it the phone froze and shut down by itself and now everytime I try to turn it on it gets stuck on the first screen that appears! (Samsung Galaxy S III mini GT-I8190)
My phone is not rooted and no Rom is flashed. I haven't done anything to it.
What can I do to fix the problem?! Please help!!
Click to expand...
Click to collapse
remove battery for some minutes then try, if not
boot into recovery and wipe cache, if not, wipe data, if not
flash your stock firmware

How to wipe cache in recovery mode? I can only go to download mode by holding the home and the volume down buttons.
and how to flash the stock's firmware?

AytchG said:
How to wipe cache in recovery mode? I can only go to download mode by holding the home and the volume down buttons.
and how to flash the stock's firmware?
Click to expand...
Click to collapse
hold volume up + home + power.
if it didnt work, flash attached .tar file (unzip before) as pda in odin. (it will wipe your data)
for flashing stock, see my signature

Is there any other way better than wiping data? xD

AytchG said:
Is there any other way better than wiping data? xD
Click to expand...
Click to collapse
hmmm, i guess it will wipe only cache see here http://forum.xda-developers.com/showthread.php?p=45634960#post45634960
EDIT: as the original thread, it wipe your data

Fixed!! Thank you very very much!!!

AytchG said:
Fixed!! Thank you very very much!!!
Click to expand...
Click to collapse
So..did it wipe only cache, or did your data got lost as well?

Only cache The data hasn't been touched

AytchG said:
Only cache The data hasn't been touched
Click to expand...
Click to collapse
Good, as I thought, since it's just a empty cache.img inside the tar

(GT-I8190) Displays Wrong Phone Model When phone is starts
hello guys i encountered some problem too with my screen, but mine is not the same i may have loaded incorrect tar files via odin and encountered this problem, my firmware is official and also my binary is official,ive recovered the original firmware and recovery mode through (sammobiles.com) i really dont get why it displayed incorrect phone model on screen, i cant trace anymore what i did wrong but hopefully you guys can help me, i would be very grateful for your help , im very frustrated right now on what should i do to restore everything back please help:crying:
---------- Post added at 11:58 AM ---------- Previous post was at 11:50 AM ----------
hello guys my device is (GT-I8190- S3 mini) i encountered some problem too with my screen, but mine is not the same i may have loaded incorrect tar files via odin and encountered this problem, my firmware is official and also my binary is official,ive recovered the original firmware and recovery mode through (sammobiles.com) i really dont get why it displayed incorrect phone model on screen instead of (GT-I8190 S3mini) it Dispplays (GT-I9100) which is the Galaxy S2 displays on screen when i start my phone, so confused right now, i cant trace anymore what i did wrong but hopefully you guys can help me, i would be very grateful for your help , im very frustrated right now on what should i do to restore everything back please help:crying:

& I encountered some problem reading your orange text

[QOUTE=Aytch;45707180]Hi
AytchG said:
Hello,
Today my phone was functioning normally until I decided to launch a game (Jewels Star or something like that) that I always play normally.
But today when I entered it the phone froze and shut down by itself and now everytime I try to turn it on it gets stuck on the first screen that appears! (Samsung Galaxy S III mini GT-I8190)
My phone is not rooted and no Rom is flashed. I haven't done anything to it.
What can I do to fix the problem?! Please help!!
Click to expand...
Click to collapse
it would have been easier if you had rooted your phone. in that way you can hard reset the phone by pressing the VOLUME DOWN + POWER for 15sec, after which you press the HOME KEY and then follow the pop up to continue.

samersh72 said:
hold volume up + home + power.
if it didnt work, flash attached .tar file (unzip before) as pda in odin. (it will wipe your data)
for flashing stock, see my signature
Click to expand...
Click to collapse
will this work for g730a variant

Recovery
AytchG said:
How to wipe cache in recovery mode? I can only go to download mode by holding the home and the volume down buttons.
and how to flash the stock's firmware?
Click to expand...
Click to collapse
The s3 mini cant be put into recovery mode using buttons so you have to download the android sdk from google, right click adb folder, open in command prompt and type in reboot recovery.

I have little bit higher problem!
I was flashing custom rom and i t was flashed when i tried to start phone it was just looking like dead phone no reactions anything please help

Is there a way to wipe the data through Odin. If I try through recovery mode then the phone crashes and restarts immediately. In fact if I try to do any of the operations that touch Data then it crashes and restarts the phone. Thanks

my Samsung galaxy s 111 mini gt-18190 stuck on Samsung logo what should i do

[Q] Note in Semi-Brick

Hello , first of all please treat me as a newbie .
From Ultimate I installed the latest Rom Rom Carbon . After that the phone started to behave erratically until it went out.
When I turn the screen only displays Samsung .
I have access to CWM and Download Mode from the CWM tried again I set you the Ultimate Rom that worked me well ( why I changed ! ? ) , But nothing, when you install the ROM , middle restarts , returning the samsung screen or off.
I also tried to use the nandroid restore but nothing happens , sometimes I get to see the home screen of the rom, but then is frozen .
I have been told that I have to retrieve it by putting using odin the original rom gingerbread 2.3.6 and then move to the official 4.1.2 then install the kernel philz corresponding to 4.1.2 .
But I can not get the links to these roms , I'm really desperate because in a week I 'm on vacation and my Note quisera working again .
( apologies , I'm using the google translator)
Thanks in advance and greetings from Buenos Aires.

Boot into recovery again. Then go to mounts and storage. Then format system, data, cache and preload. Then restore your nandroid of ultimate and check.

Unfortunately, in my desperation rookie, format the external sd. I know, I deserve everything that happens to me. : (Sorry. ..

nokiamodeln91 said:
Boot into recovery again. Then go to mounts and storage. Then format system, data, cache and preload. Then restore your nandroid of ultimate and check.
Click to expand...
Click to collapse
Can't he try to flash stock firmware using pc Odin after doing the 4 formats ??
Sent from my GT-N7000 using xda app-developers app

kaborayyan said:
Can't he try to flash stock firmware using pc Odin after doing the 4 formats ??
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
He can but the rom he was on previously worked fine. So why not try that.
Although now he mentioned that he has wiped one of the storages. So if the backup was on that card then Odin is one way or flash a fresh new rom using recovery.

nokiamodeln91 said:
He can but the rom he was on previously worked fine. So why not try that.
Although now he mentioned that he has wiped one of the storages. So if the backup was on that card then Odin is one way or flash a fresh new rom using recovery.
Click to expand...
Click to collapse
Now I'm a PC, I installed a ROM with GingerBread Stock (from here: http://windowstorussia.com/n7000-note-has-found-a-rom.html) using Odin, the process was completed successfully, but Note keeps shutting off. Now pass the samsung screen, I get to see the animated logo and hear the music but then turns off. Even got to see for a moment the welcome screen of the desktop (in Russian), but the Note turn off. : (

Boot into recovery and do a factory reset as you have installed GB.

nokiamodeln91 said:
Boot into recovery and do a factory reset as you have installed GB.
Click to expand...
Click to collapse
Dear Nokiamodeln91:
I successfully GB flash and then a "wipe data / factory reset" using the stock recovery and still the same. The Note still turn off after show samsung logo.
Note: When the stock recovery is initialized NEXT throws the error message: "can not access to '/ system / csc / BTU / system".
Although immediately after indicated:
"Successfully applied multi-CSC."
I'm using the google translator, sorry.

silencio3k said:
Dear Nokiamodeln91:
I successfully GB flash and then a "wipe data / factory reset" using the stock recovery and still the same. The Note still turn off after show samsung logo.
Note: When the stock recovery is initialized NEXT throws the error message: "can not access to '/ system / csc / BTU / system".
Although immediately after indicated:
"Successfully applied multi-CSC."
I'm using the google translator, sorry.
Click to expand...
Click to collapse
CSC means Customer Service Code. I think you flashed a ROM that's not suitable for your region or carrier (service provider).
Try flashing a new GB ROM from dr.ketan thread here ... select the appropriate ROM based upon your carrier and country.

I would say instead of flashing a GB rom, flash a JB rom.

nokiamodeln91 said:
I would say instead of flashing a GB rom, flash a JB rom.
Click to expand...
Click to collapse
I thought he wanted the GB for a reason. But of course JB is better.
Sent from my GT-N7000 using xda app-developers app

Dear friends:
yesterday during one of my tests, when I installed the Kernel Philz, threw me the message that my battery was almost empty, which surprised me because it always appeared when the charging icon, appeared almost full.
I hope it is just the battery. Today I will see if I can buy or try another battery.
The'll informed.
BTW: I tried flashing GB roms and JB, always with the same result: successful flash, but stops before reaching the desktop.

[Solved] It was the battery!
First of all thank you very much for your help !
It was the battery ! . Although the loading icon showed almost loaded , was nearly exhausted. The track gave the Kernel Philz , when I tried to run the recovery mode , it appeared a message that told me the battery was exhausted.
Today I went to a business and bought one. And presto , the phone started and reached the Android splash screens .
Problem solved.
What could have happened? I do not know , I remember the Carbon Rom installed , make mistakes of gapps ( I installed a newer version of android that he used the Carbon) , then I changed the gapps ( mostly via CWM ) Note and walked. Towards evening , wanting to see a youtube video mobile overly heated . I decided to turn it off and leave it charging ( charger samsung but a little loose contact to the tab that comes on the phone, always used " enrroscando " the alrrededor mobile cable for connecting and charging Although the record ) .
The next morning he surprised me were the 76 % should have charged all . Two hours later the phone died . What died was the battery , of course.
What confused me was that when I put in recovery mode, the screen remained stable forever, so I figured it was not the battery , now fall obviously the recovery mode makes minimal use of the battery and display resources .
Anyway, for the next we know that the battery may be the problem. It may have been a failure of the Rom ? of gapps ? Charger ? or battery ( bought in May).

Possibility is that you have to recalibrate the batterie. there are apps in the market that can do this.
Else may be the charger in the phone itself is damaged. or the usb port. Also possible that the new battery is defect, too.
try your battery in another Note. Then you will know.
the USB port on my Note was faulty so charging was not stable. Replacement cost me 20 Euro.

[Q] I did sth. wrong with my phone

Please help me.
I have N-7000. Its doesn't start anymore. Only "Samsung Galaxy Note GT-N7000" sign with yellow sign.
What did I do?
1. Changed with cyanogenmod installer my system to: cm 10.2 - it was working well. (still had full internal-card with thing i dont need)
2. Wanted Sweet Rom V 11.1
2.1. installed over recovery mod the newest philz cernel (from 08.06.2014, if i remember right)
2.2. installed the rom over recovery after wipings (all how decribed, did no mistakes)
2.3 restarted system, setup-wizard stoped (to full internal-sd-card)
2.4 so i went to recovery and wiped again things, like described in thread of sweet rom + i wiped additionally partion
2.5 restart system: everything was good and runnig well (but bit laggy) ! my sd-card was still full
3. i decided to delete everything from my internal: went to settings and choosed option: "save and recover" and then said: delete all.
Now my phone dont start anymore!
Connected to windows, it makes a sound, like somethng was conected but nothing appears there. (i think it recognise, there are 2 storages, but i can not go in or do something from windows.)
Also: if i put phone on charge: there is this battery-icon but not green! even its full and the picture dont move.
i tried to remove battery and start again: same! just this writing "samsung galaxxy note gt-n7000" but nothing happening
if i try to go to recovery again (volume up + button ü button" screen wents black and then charging icon appears or this other writings ...
sorry for my english! please help me somehow!

i am not sure how it call in english, but maybe it was "factory reset" in settings, which i did ... i was with cm on 4.3.1 and with sweet rom on 4.1.2

Sounds like you bricked your phone. That's all I can say. Might be possible to reflash with Odin. Sorry to say this, but you should have read more *before* messing with your phones brain... [emoji15]
Gesendet von meinem GT-N7000 mit Tapatalk

what did i do wrong? :crying:
i am now in downloading mode: what can i do here? its writen "downloading ..." do not turn off target ...
odin mode
product name: gt-n7000
custom binary download: yes 1 (counts)
current binary: custom
is it good? how long i must wait till something happens? what can i do or what could i do else?

ok, looks like i need also odin on my windows?
there are two versions: 3.07 and 3.09 which is good?
what am i doing withit now? dont wanna make again some mistake.
install odin and conect phone? and then?

If the download mode works, it is not bricked.
Why not flash CM:
http://wiki.cyanogenmod.org/w/Install_CM_for_n7000
---------- Post added at 06:41 PM ---------- Previous post was at 06:36 PM ----------
After reading the webpage I decided to flash a nightly build of CM, and it works without a problem.
https://download.cyanogenmod.org/?device=n7000
PS: Unplug the USB cable from the phone when trying to get into download/recovery mode. The battery display often gets in the way otherwise.

Use Odin 3.09, either flash a stock 4.1.2 JB rom (if u still want sweet rom) or follow the advice above mine. Search for triangle away to remove the yellow exclamation mark.

Tried to install Xposed, now my phone stuck on loading screen, what should i do? help

Xposed from this theme https://forum.xda-developers.com/showthread.php?t=3034811 (3.1.1.akp)
Phone - Galaxy S5,
Android 5.0, as i remember.
I tied to install the program, chose variant with backup in the installer, but now my phone is stuck on loading screen for like 20 mins, showing samsung animated logo.
What can i do now?

Are your rom is stock or custom ? And are you using which recovery ? Twrp ?

Restore your backup.
Gesendet von meinem Moto G 2014 LTE mit Tapatalk

DarkMountain said:
Are your rom is stock or custom ? And are you using which recovery ? Twrp ?
Click to expand...
Click to collapse
I don't even know what rom is. :S
uhm, well and i dont have a copy of my phone's system on PC or something like that. I'm not even sure if the installer really did a backup.
gothicVI said:
Restore your backup.
Click to expand...
Click to collapse
If i know how to do it! I'm kinda lame in phones and android. Could you tell me something i can do now? I'm currently trying to find some program for PC now, so i can connect my phone and hopefully do something
Even hard reset (Volume down + Home + Power buttons at the same time. ) does'nt works now. i keep getting the loading logo.

It seems you are new to android, custom ROM, recovery etc. and this indicate you haven't took nandroid backup of your ROM to restore it later... Now what you can try is, go to stock recovery with pressing phone buttons combination ( google it according to your phone model ) and do factory reset (warning- it will wipe all your data but may set your phone to boot and work ) ..at least try it when nothing is working

sk99 said:
It seems you are new to android, custom ROM, recovery etc. and this indicate you haven't took nandroid backup of your ROM to restore it later... Now what you can try is, go to stock recovery with pressing phone buttons combination ( google it according to your phone model ) and do factory reset (warning- it will wipe all your data but may set your phone to boot and work ) ..at least try it when nothing is working
Click to expand...
Click to collapse
Yeah, i'am.
I tried hard reset several mins ago. Problem seems to be very interesting, i wonder if i find a solution.
Will reply here if i ever get i working again.

nerinz said:
Yeah, i'am.
I tried hard reset several mins ago. Problem seems to be very interesting, i wonder if i find a solution.
Will reply here if i ever get i working again.
Click to expand...
Click to collapse
Just Google "How to back to stock with odin and write your (phone model). If you follow the guides carefully your phone will format you will lose your all data but your phone is will work.

DarkMountain said:
Just Google "How to back to stock with odin and write your (phone model).
Click to expand...
Click to collapse
Will try tomorrow, TYVM!

I managed to update my system via Odin program, everything is fine now! Even my settings\apps survived!
Thanks you all for the help.
The problem is solved.

I managed to update my system via Odin program, everything is fine now! Even my settings\apps survived!
Thanks you all for the help.
The problem is solved.

nerinz said:
I managed to update my system via Odin program, everything is fine now! Even my settings\apps survived!
Thanks you all for the help.
The problem is solved.
Click to expand...
Click to collapse
I almost bricked my Samsung G5 (the ATT version with the screwy locked bootloader, I think?) almost this exact same way about two years ago. It took a bit with ODIN and some time on the forums here, but eventually I got it working again. Not fun but I am glad everything worked out for you as well.
To be honest I learned more successfully trying to unbrick that phone than I ever would have had I not royally effed up....