[Q] Need urgent help !!! Unbrick, Kernel, Recovery - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

Hello friends,
I need urgent help !!!
Yesterday one of my very close friend gave me his Note to upgrade to JB (he was on ICS. LF4 if I remember correct)
So I did following :
1. Downloaded couple of Custom ROMs and PhilZ 6.26.6 on to his phone (External SD)
2. Tried to boot into Recovery and voila.....his HOME button is not working. Anyways I booted and adb reboot recovery
3. Then I flashed PhilZ and it flashed successfully. Since I couldn't boot into Recovery without Home button I did Reboot System.
4. Stuck in N7000 Blackscreen and adb shows Device Offline
What I am planning to do now
1. Put device to DOWNLOAD mode through USB JIG
2. Flash Stock JB (Here's 2nd problem - download links are not working for Stock JB at least not Indian one Can somebody with fast internet plz upload it on dev host or Mediafire and share with us. Thanks !!! )
3. Reboot into Recovery and flash PhilZ
4. Flash Custom ROM
Am I doing things right? Is my direction correct?
I would still prefer if I somehow could boot in current OS, put some Custom Recovery and flash Custom ROM. Saving Stock ROM flash path and ODIN.
Plz help and advise !!!!!
Thanks !!!

You installed a kernel that doesn't fit to ICS. So it's no suprise the system doesn't boot. Install an ICS kernel and at least the system should start again.
And after that: give it back to your friend and let him repair the home button first. Don't risk being the fool who ruined his device.
Update: just read again and saw that right now you don't get a connect with adb. So yes, it seems to be the only solution to install an stock rom with Odin. After that I still would give it back for repair.

ThaiDai said:
You installed a kernel that doesn't fit to ICS. So it's no suprise the system doesn't boot. Install an ICS kernel and at least the system should start again.
And after that: give it back to your friend and let him repair the home button first. Don't risk being the fool who ruined his device.
Update: just read again and saw that right now you don't get a connect with adb. So yes, it seems to be the only solution to install an stock rom with Odin. After that I still would give it back for repair.
Click to expand...
Click to collapse
Can you give me link for safe ICS kernel ? Will this work http://www.mediafire.com/download/32ik5mg6bgg8q1d/PhilZ-cwm6-XXLRK-XEU-3.99.tar.md5
I need to boot in the current OS once to take backup of EFS (I heard JB wiped off EFS of few).
Thanks for coming forward to help !!!

Yes this is an ICS kernel with Philz recovery. Should work and give you the chance to reboot into the OS.
And a backup of EFS is a very good idea (after a repair in Thailand I'm using a developer imei).
Good luck.

Related

[Q] Optimus 2x bricked?

Hi,
We have a problem with an Optimus 2X.
1. We rooted the phone
2. Installed ClockworkMod recovery from ROM Manager (Flash recovery option). Successful window appeared.
3. We boot in recovery mode from ROM Manager.
The phone now hangs on boot at the LG Logo. There is no way to boot in recovery, and there is no way to do a normal boot. (Tried to boot with volumen down and lock buttons pressed, and without pressing volume down...)
It's like there was a flag that forces the phone to "boot in recovery" or something like that.
So we can't boot the phone in any mode...
We also tried smartflash, but nothing...
Any idea? How can we restore it?
Thank you very much in advance...
I would try the procedure at this link: add "http:" infront of my links, for some reason i'm not allowed to post outside links.
//android.modaco.com/content/lg-optimus-2x-2x-modaco-com/335474/25-mar-nvflash-stock-rom-release-v10b-dated-1300166062-15-03-2011/
It uses the nvidia flash tool and will allow you to flash a clean stock rom without booting up the device or going into clockwork.
The stock rom version that you can download on the link above will do fine. After you've flashed the stockrom you can reinstall clockworkmod. If I were you I would do that using these instructions:
//android.modaco.com/content/lg-optimus-2x-2x-modaco-com/335479/10-may-3-0-2-8-clockworkmod-recovery-for-the-lg-optimus-2x/
Basically all you need to do is attach the phone to the computer, make sure usb debugging is enabled and double click the install clockworkmod.bat file found in the extracted zip file downloaded from the link below.
http://forum.xda-developers.com/showthread.php?t=1098745
After that you should be able to flash all the custom roms you want. I hear the latest Cyanogen nightly is pretty stable!
I had the same problem and question a couple of days ago...
Mine also when trying to install CWM..
Follow this link and flash with NVflash and You should be good to go again
http://android.modaco.com/content/l...rom-release-v10b-dated-1300166062-15-03-2011/
I also gave up on the CWM flashing from PC and paid for this app in the market:
https://market.android.com/details?id=com.modaco.twoxrecoveryboot&feature=search_result
Its .99 pence so not to bad... remember You NEED ROOT for the CWM recovery flashy thingy
After all flashing I just went with the stock ROM with the 0606 upgraded baseband
Works ok now (flashed with smartflash)
The 0606 baseband ROM can be found here:
Happy unbricking!
Thank you very much to both!
NVflash did the trick and I could fix the full brick!
Now I don't fear anything... nvflash can resurrect it!! xD
Thank you very much!!!!!
THANK YOU SO SO SO SO SO SO MUCH GUYS!!!!!!!!
i was messing about for about 5 hours because my apx driver didn't successfully install but i finally found one and got it to work.
i am so relieved. I can sleep easy tonight
once again a huge thanks.

[Q] Having problems getting into recovery mode

I am having a very hard and frustrating time trying to get into recovery mode. Basically I installed a ROM today that was very unstable, and when I go to rom manager trying to flash a different ROM the screen just goes black any help would be greatly appreciated thankyou.
Rynoh29 said:
I am having a very hard and frustrating time trying to get into recovery mode. Basically I installed a ROM today that was very unstable, and when I go to rom manager trying to flash a different ROM the screen just goes black any help would be greatly appreciated thankyou.
Click to expand...
Click to collapse
Unless u wanna flash AOSP roms (CM or MIUI) or maybe froyo roms stay away from that app. To get to recovery the easiest would be to flash a kernel with cwm backed in. Download this package http://www.mediafire.com/?tx56ypyw8wx4c8n. Open ODIN_Kernel_Flasher in 2 - Kernel folder, add Kernel.tar to PDA, uncheck auto reboot, Connect your phone in download mode to PC and hit start. Once complete pull the battery and reboot your phone in recovery mode. Wipe data (factory reset), cache and dalvik cache and then flash a rom of ur choise. In case u'd want a GB (gingerbread) rom coming from stock or froyo rom first u'll HAVE TO flash gb bootloaders before the rom. U'll find the gb bootloader flasher in the package u downloaded, check out the readme file as well.
Now something else is going on with the phone. It was fine and charging when I went to bed now the freaking thing is stuck in a boot loop =(, the odin version you told me to download will it also fix this issue? Or do I need a different one?
If u can get it into download mode ur all fine, as for which Odin, u'll find everithing ur looking for in that package I've linked. Once extracted go trough the readme file.
Edit: which rom did u come from and which one did u flash last?
I came from an obsession rom which was the unstable one, flashed to darkys rom. I still can not get it into recovery mode I will give the odin link you posted a try thanks for all of your help
Rynoh29 said:
I am having a very hard and frustrating time trying to get into recovery mode. Basically I installed a ROM today that was very unstable, and when I go to rom manager trying to flash a different ROM the screen just goes black any help would be greatly appreciated thankyou.
Click to expand...
Click to collapse
Does ODIN not recognize that the captivate is hooked up?

please help me: my galaxy note doesn't boot and doesn't enter into recovery

hello,
i am trying to flash a cutom rom, i started by rooting my phone through the samsung stock recovery, then i download cwm.zip recovery and install it from stock recovery (update from zip file).
when i wipe data/factory reset the phone restart and never boot again into the os, i tried to boot into recovery by pressing volume up + home + power button but nothing happen and the phone remain on the samsung logo.
please help me.
thanks a lot
Reply this
1. Where you find cwm.zip can you link me that page (not file)
2.Are you able to entre in download mode
3.You were on which ROM while doing this?
i downloaded cwm.zip with the busybox from: http://forum.xda-developers.com/showthread.php?t=1647148
yes i can enter the download mode
i am on the stock ics rom (which i upgraded the 2.3 to it)
please help me
and thanks for the fast reply
First you didn't know that zip is not available now, and you must have this which you downloaded earlier, that zip is abandonas it proved to use unsafe and can brick device.
Not only that, you souldn't have to wipe anything on stock ICS.
Anyway if you are able to enter download mode then flash any GB ROM you have already with you, otherwise download from my signature (pre rooted) and flash with Odin
ok i wasn't know that, anyway i downloaded odin, what did i need else? what you mean by "download from my signature (pre rooted) and flash with Odin"?
i didn't understand this sentence, did it mean that i need specific type of rom to flash it from odin?
thank you a lot
Yes download this
http://d-h.st/HJM
Extract it and flash with PC odin.
dr.ketan said:
First you didn't know that zip is not available now, and you must have this which you downloaded earlier, that zip is abandonas it proved to use unsafe and can brick device.
Not only that, you souldn't have to wipe anything on stock ICS.
Anyway if you are able to enter download mode then flash any GB ROM you have already with you, otherwise download from my signature (pre rooted) and flash with Odin
Click to expand...
Click to collapse
======================================================================
ok i see the link in your signature and i am downloading the rom, and when it finish i must flash it with odin? and it must work? and when it work how can i get ics again? can i update system from android settings?
please reply thanks
with my respect
See everything is on your luck, I hope you get device working again with above said ROM.
But remember even after flashing ROM successfully, it may not boot up, dont worry. enter to recovery(vol up+hole+power) and wipe cache, delvik cache and data. then it should fine.
But if while flashing ROM, if it stuck then your luck is not with you and chances will be high you have bricked device.
Let report back, n Me or someone will guide you for next step.
dr.ketan said:
See everything is on your luck, I hope you get device working again with above said ROM.
But remember even after flashing ROM successfully, it may not boot up, dont worry. enter to recovery(vol up+hole+power) and wipe cache, delvik cache and data. then it should fine.
But if while flashing ROM, if it stuck then your luck is not with you and chances will be high you have bricked device.
Let report back, n Me or someone will guide you for next step.
Click to expand...
Click to collapse
===============================================
if it is depends on my luck, so it is a problem anyway thank u a lot and wish me a good luck.
B'coz what you did was totally wrong and risky, and if any damage you had can only rule out once your device gets life again. So pray before flashing and GoodLuck from ourside.
dr.ketan said:
B'coz what you did was totally wrong and risky, and if any damage you had can only rule out once your device gets life again. So pray before flashing and GoodLuck from ourside.
Click to expand...
Click to collapse
==================================================================
yes it was been a wrong, and i didn't have the enough experience to do like this step,
i install the ore rooted rom (in your signature) and i flash it, before it finish flashing it stop and then give an error, and when i turn on the phone to the recovery mode it give a message "firmware upgrade encourtted an issue, please select recovery mode is kies and try again" what can i do please.
thanks
You should have noted down the error on that flash before you went to recovery mode. Every error is an essential part and you should take a note of it as this can lessen your upgrade issues.
So here's what your going to do. Turn the phone to Airplane Mode.
Try to reflash again the pre prooted GB room in download mode Once your successful doing it, download stock ICS firmware (in your region) from www.samfirmware.com. Don't use OTA updates as this will mostly fail. Just use PC KIES to update your phone back to 4.0.4 ICS.
Take it one step at a time and again next time, remember try not to be in a hurry doing it. It takes patience and a bit of luck in flashing and upgrading.
Yes as above said, reflash ROM by putting device in download mode
hello again
in the begining thank you for your help
i fixed my phone, in a shop specialized for these cases but i dont know how.
and my phone now returned to the stock ics rom.4.0.3
i would ask if i can flash a custom rom (jelly bean 4.1 for example) and what are the safety steps that can i follow to avoid any another brick to my phone? what do you advise?
thanks again.
if u on ics u need to flash a safe kernel like philz or hydracore. that's it. Now u r good to go
Is there any danger if i flash any of the kernels u mentioned? And does the phone remain working after i flash the kernel? And after i flash the kernel what is the next step? Flash the rom? Or there is any step required before?
Thanks a lot
yes the phone will work after flashing any of the mentioned kernels.
philz is the best for ics as it can be installed from stock recovery and it's safe and gives u root and cwm
then u can boot into cwm and do a factory reset format system, data, wipe cache and dalvik then install the new rom.

I9001 bricked/soft-bricked, please help

Hi!
Today i wanted to update my firmware just because Samsung Kies asked me if i wanted to. I couldn't have been more wrong when i chose to update.
The update froze at 3% and after a lot of time i unplugged the phone and ended up with a brick instead of a phone.
If i try to turn it on, i get a black screen with a "phone--!--pc" picture. I can enter Download Mode by pressing VolumeDown + HomeButton + PowerButton and i get an android logo with ''Downloading... Do not turn off target'' written under it.
My phone was never rooted, nor updated ( it remained with its out-of-the-factory OS and everything ).
For the past 6 hours i've been trying to use Odin v4.43 along with AriesVE.ops (the one from the well-known WORKED2 archive) to try and get recovery-clockwork to work.
So my questions are:
Given the fact that my phone was not rooted, how can i get my GT-I9001 to work again? Is this even possible?
Can i first root it in its condition, then flash a custom rom like cyanogenmod? Or do i need to install a stock rom and then try a custom one?
What other options do i have?
Everything i've tried so far with Odin froze while downloading and i have no other solution to this problem. Please help!
zerkylo said:
Hi!
Today i wanted to update my firmware just because Samsung Kies asked me if i wanted to. I couldn't have been more wrong when i chose to update.
The update froze at 3% and after a lot of time i unplugged the phone and ended up with a brick instead of a phone.
If i try to turn it on, i get a black screen with a "phone--!--pc" picture. I can enter Download Mode by pressing VolumeDown + HomeButton + PowerButton and i get an android logo with ''Downloading... Do not turn off target'' written under it.
My phone was never rooted, nor updated ( it remained with its out-of-the-factory OS and everything ).
For the past 6 hours i've been trying to use Odin v4.43 along with AriesVE.ops (the one from the well-known WORKED2 archive) to try and get recovery-clockwork to work.
So my questions are:
Given the fact that my phone was not rooted, how can i get my GT-I9001 to work again? Is this even possible?
Can i first root it in its condition, then flash a custom rom like cyanogenmod? Or do i need to install a stock rom and then try a custom one?
What other options do i have?
Everything i've tried so far with Odin froze while downloading and i have no other solution to this problem. Please help!
Click to expand...
Click to collapse
Yes it is possible as long as your device boots into Download mode.
No you can't root it in its current condition.
You need to download a stock firmware, flash it using Odin or Heimdall (recommended), then root it and finally install a custom ROM if you want.
kalpetros said:
Yes it is possible as long as your device boots into Download mode.
No you can't root it in its current condition.
You need to download a stock firmware, flash it using Odin or Heimdall (recommended), then root it and finally install a custom ROM if you want.
Click to expand...
Click to collapse
Thank you for answering!
I fixed the issue. Tried different usb port along with a different version of CWM (5.5.0.4) which I installed with Odin v4.43. CWM 5.5.0.4 caused a bootloop, but i used it only to install CWM 6.0.4.9 from external_sd, so the bootloop problem was gone. Then flashed CyanogenMod 11 and now works like a charm !
I attached an archive with CWM 5.5.0.4, AriesVE.ops and Odin v4.43, so that anyone having my problem can solve it the way i did. But keep in mind that this version of CWM *may* cause a bootloop, so prior to installing it, you should have a working version of CWM on your external_sd. Use CWM 5.5.0.4 to install the better version of CWM from your external_sd. Also, whatever you do is at your own risk!

I think I bricked my phone...

Hey guys, this is my frist thread, and i need a help.
I was going to flash a stock rom, so I open the CWM to wipe data/cache and accidentally format the system directory.
But as I did not realize, and I asked to restart the phone and was told by the recovery that had no root. Not realizing still ****, I authorized him to do the root, and restarted the phone. When I put in so download the computer did not recognize more when turn on is in black screen, and I can not access the CWM. Help me please.:crying::crying::crying:
Gamazyn said:
Hey guys, this is my frist thread, and i need a help.
I was going to flash a stock rom, so I open the CWM to wipe data/cache and accidentally format the system directory.
But as I did not realize, and I asked to restart the phone and was told by the recovery that had no root. Not realizing still ****, I authorized him to do the root, and restarted the phone. When I put in so download the computer did not recognize more when turn on is in black screen, and I can not access the CWM. Help me please.:crying::crying::crying:
Click to expand...
Click to collapse
1. So your phone is rooted now and you've a custom recovery... mmm and which files did you use to do it?
2. Have you the Samsung drivers installed on your computer?
3. Are using the correct Odin's version?
Look... The issues still here...
Viper The Ripper said:
1. So your phone is rooted now and you've a custom recovery... mmm and which files did you use to do it?
2. Have you the Samsung drivers installed on your computer?
3. Are using the correct Odin's version?
Click to expand...
Click to collapse
Viper...
2- I have the drivers since 2013!! I instaled a newer version but , not works.
1- I have these( CWM and Root) because i get this phone with CM 8 and i upgrade it to CM 10.2, the same with CWM.
3- I download the version from this post http://forum.xda-developers.com/showthread.php?t=2609021
updates:
I miraculously managed to open the recovery mode and so I again installed CM 10.2.
But I was thinking of installing the stock ROM to see if I could make the system be lighter as a great fact that this phone is not have much larger interior space. Now the question is another: Will settle the stock and cleared with the root, it would be lighter? Or should I look for another rom? And I still can not make the computer recognize the phone.
Gamazyn said:
Viper...
2- I have the drivers since 2013!! I instaled a newer version but , not works.
1- I have these( CWM and Root) because i get this phone with CM 8 and i upgrade it to CM 10.2, the same with CWM.
3- I download the version from this post http://forum.xda-developers.com/showthread.php?t=2609021
updates:
I miraculously managed to open the recovery mode and so I again installed CM 10.2.
But I was thinking of installing the stock ROM to see if I could make the system be lighter as a great fact that this phone is not have much larger interior space. Now the question is another: Will settle the stock and cleared with the root, it would be lighter? Or should I look for another rom? And I still can not make the computer recognize the phone.
Click to expand...
Click to collapse
Wooow! Great!
If you have access to recovery mode, you have all you need (download mode is NOT necessary at all if you can boot into recovery mode ) There's some light CUSTOM STOCK ROMS as Stock Lite, Adrenalin, Spacecaker's roms... they are based in stock firmwares and use custom kernels and mods. are light and smooth, have a great stablility and battery life
Do a back up from your current rom (just in case) and flash one of them
Viper The Ripper said:
Wooow! Great!
If you have access to recovery mode, you have all you need (download mode is NOT necessary at all if you can boot into recovery mode ) There's some light CUSTOM STOCK ROMS as Stock Lite, Adrenalin, Spacecaker's roms... they are based in stock firmwares and use custom kernels and mods. are light and smooth, have a great stablility and battery life
Do a back up from your current rom (just in case) and flash one of them
Click to expand...
Click to collapse
Thx maan! I should try someone of these, in a near future. Thx for the help.

Categories

Resources