Database Develop

Lens Protector?

Perhaps I'm being overly sensitive in regards to my lens, but I keep thinking, one little scratch and it won't take a decent picture again.
Anybody tried just cutting up a screen protector to a mini size to fit it or are there any companies I haven't seen yet making one?
Thanks for any advice.

I've been wondering the same thing but I haven't seen one anywhere.

Just so you know, the OEM lens cover sticks on and is easily replaceable. If you take off the battery cover, it can be popped off with your fingernail. HTC probably has a replacement parts program. I can't see it costing over $5 to get a new lens protector.

w1retap said:
Just so you know, the OEM lens cover sticks on and is easily replaceable. If you take off the battery cover, it can be popped off with your fingernail. HTC probably has a replacement parts program. I can't see it costing over $5 to get a new lens protector.
Click to expand...
Click to collapse
Wow. Awesome. Thanks for the info. I never even thought of it that way.
Not so worried anymore.

Anyone know if the lens cover is made of Gorilla Glass like the front screen?

timehunter said:
Anyone know if the lens cover is made of Gorilla Glass like the front screen?
Click to expand...
Click to collapse
I do not believe the front is made of Gorilla Glass either. There was some conflicting info for a bit about that, but I think the final verdict is that it isn't Gorilla Glass.

BSE back skin comes with a little cover for the camera

I have this but hesitate to put it on. I'm afraid that it will degrade pictures. anyone install the lens protector from bse and can give an opinion?
seanhassars said:
BSE back skin comes with a little cover for the camera
Click to expand...
Click to collapse

Is there a good way to protect the back camera from scratch?

Hi, under the recommendation of several people, I removed the stock thin film that protected the lens of the back camera. Is there a good way to protect it from scratch? Right now, I am using the SGP Ultra Capsule Series case as shown in the URL.
http://www.spigen.com/sgp-samsung-galaxy-note-case-ultra-capsule-series.html
Thanks.

hajime_android said:
Hi, under the recommendation of several people, I removed the stock thin film that protected the lens of the back camera. Is there a good way to protect it from scratch? Right now, I am using the SGP Ultra Capsule Series case as shown in the URL.
http://www.spigen.com/sgp-samsung-galaxy-note-case-ultra-capsule-series.html
Thanks.
Click to expand...
Click to collapse
That's overkill, just buy the Flip Cover, it will add 1mm around your camera lenses.

Since the Device sees the outside world through the Camera , using a layer on the camera will affect the amount of light getting in to camera and hence the quality of the image captured by the device will be low. So using a layer on the camera for protecting it from scratches is not a good option , it will protect the camera from the scratches but it will destroy the sole purpose of the camera. So alternative option will be using a case that can make the camera grooved-in and hence it can give considerable protection as camera surface will be grooved-inside the shell case.Choose the case wisely to get this kind of setup.

The glass covering the camera lens is almost flush with the aluminium border and the plastic back, so when you lay the phone on a flat surface it will almost touch it.
There are very thin cases, that add only 1 mm thickness to the phone and help separate the lens cover from the desk.
I'm trying to use InvisibleShield back proctector, it adheres well to the back cover, after a few days drying it does not seem that it's going to peel-off, and it helps maintaining the camera cover from touching the table.

hajime_android said:
Hi, under the recommendation of several people, I removed the stock thin film that protected the lens of the back camera. Is there a good way to protect it from scratch? Right now, I am using the SGP Ultra Capsule Series case as shown in the URL.
http://www.spigen.com/sgp-samsung-galaxy-note-case-ultra-capsule-series.html
Thanks.
Click to expand...
Click to collapse
What you already have is sufficient. Its not that easy to scratch the camera lens, and anything you put in front of it will in some way spoil the quality of your shots. Its not as though there is something available like a UV filter that you would use on an SLR camera. My advise, is just go out and take pictures.

I bought the Real look screen protector from amazon and it comes with 4 tiny screen protector for the back camera. Best imo, but I haven't tried any others

I also got scratches there. Sammy you disappointed again
Get a case with camera shutter.
Sammy used cheap material again, it should have been gorilla glass.

Boy124 said:
I also got scratches there. Sammy you disappointed again
Get a case with camera shutter.
Sammy used cheap material again, it should have been gorilla glass.
Click to expand...
Click to collapse
Just out of curiosity, what effect has that had on your picture quality? It shouldn't be that noticeable, if at all, unless its big damage that is. Usually. small scratches cause a 'softening' of the focus, but shouldn't be that apparent, unless your really looking for it. I'm not making excuses for samsung though, and indeed they would probably call it a feature, where your phone will take increasingly romantic soft photographs over time.

bigstarrynight said:
Just out of curiosity, what effect has that had on your picture quality? It shouldn't be that noticeable, if at all, unless its big damage that is. Usually. small scratches cause a 'softening' of the focus, but shouldn't be that apparent, unless your really looking for it. I'm not making excuses for samsung though, and indeed they would probably call it a feature, where your phone will take increasingly romantic soft photographs over time.
Click to expand...
Click to collapse
Got 3-4 scratches at the edge, so it did not affect picture quality.
I always used to put the phone face-down but still got scratches.

Boy124 said:
Got 3-4 scratches at the edge, so it did not affect picture quality.
I always used to put the phone face-down but still got scratches.
Click to expand...
Click to collapse
Its about what I expected. I wouldn't worry too much. I have an old clam phone and that is scratched to hell, but the pics don't show any noticeable effects. I know its far from a like for like comparison. Also, we used to scrub uv filters with scotch bright to make our own soft focus filters. You would be amazed at how much 'scratching' we had to do before we started to notice any effect. I know you want to treasure your investment, but I would get on and use it to the full. :good:

i got 4 scratches there.. can lense be replaced?
Sent from my GT-N7000 using xda premium

My Zenus PrintFolder protects the camera nicely. Love this case!
Sent from my GT-N7000 using xda app-developers app

Just made a rectangular piece of cheap plastic nd glued another plastic foldable holder for my x play. So now during photo time unfold nd zip down nd den zip up. Easy DIY nd works like a charm...

keeping the camera lens scratch free

The glass covering the camera lens at the back is protruding so putting it down on any surface would make the glass touch it...how do you guys keep it from scratching?

koppee1 said:
The glass covering the camera lens at the back is protruding so putting it down on any surface would make the glass touch it...how do you guys keep it from scratching?
Click to expand...
Click to collapse
A case that's raised more than the camera is what I'm doing. Have done this for years without ever having my lens scratch.
Sent from my SM-N910U

I'm keeping the protective little plastic cover over it. Took it off to see if any difference in pic quality and there was none.

lawtq said:
I'm keeping the protective little plastic cover over it. Took it off to see if any difference in pic quality and there was none.
Click to expand...
Click to collapse
When I pick mine up from the shop I'll be leaving the plastic on - my S4 has a gaping scratch across its camera lense!

Normally there should be no need to worry unless you intend to drag your phone across a rocky road. It's protected by a veryt scratchresistant glass, simlar to sapphire glass. It can stand a heavy beating and still perform.
The only real problem is fat from your fingers smearing onto the protective glass, this will cause weird looking arefacts with highlights so make sure you keep it clean.
/ Magnus

lawtq said:
I'm keeping the protective little plastic cover over it. Took it off to see if any difference in pic quality and there was none.
Click to expand...
Click to collapse
The plastic never covered over the sensor itself, only the outside edges.

Nitemare3219 said:
The plastic never covered over the sensor itself, only the outside edges.
Click to expand...
Click to collapse
Correct. Good protection. Or you could get the Nillkin Amazing H+ 9H Hardness Anti-Explosion Tempered Glass*for the note 4, it comes with 2 mini tempered glass camera lense protectors

Though I have not used any case or screen protector for the front screen, I have cut exact size glossy screen protector for the camera lens. I developed lots of scratches in S2 lens, from then on I started protecting camera lenses.
Note 4

If you look carefully the platic frame around the glass is just slightly above the glass so really the glass doesn't make contact with a flat surface

The Samsung s-view case is just big enough to keep the lens from touching. It's a good option if you are concerned about the lens getting scratched and want front of phone protection.

If the plastic cover doesn't affect the photos then chances are the odd scratch won't either..

Wife has S5 and glass on the lens seems pretty tough! No scratches yet!

When not using my Note 4, I shoot pictures with high end Nikon glass (lenses). Some will say to put a plain UV filter on the lens as a means of protection, never go naked. Others will ask why would one put an $80 piece of glass in front of finely tuned and crafted $2,500 piece of glass? Additionally, all those large sport photographer lenses you see taking photos.......no filters are made that size, they use hoods which extend several inches from the front of the lens as a means of protection. Now, given the camera in the Note 4 is not a high end DLSR you may not see the difference all that much, depending on the shot. However adding some form of adhoc protector over the camera will certainly cause some form of photo degradation.
If you have a phone case where the camera lens is recessed you should be perfectly fine if: (1) you pay attention how and where you place it down and (2) keep it out of your pants, bags...etc that hold keys and your loose change..etc.
Remove any added plastic or glass in front of your lens; take clearer and sharper pictures!
Goodluck

lawtq said:
I'm keeping the protective little plastic cover over it. Took it off to see if any difference in pic quality and there was none.
Click to expand...
Click to collapse
I didn't even know there was one those lol I put a skinomi skin on mine hoping that it's raised just enough xD
---------- Post added at 01:45 PM ---------- Previous post was at 01:39 PM ----------
lawtq said:
I'm keeping the protective little plastic cover over it. Took it off to see if any difference in pic quality and there was none.
Click to expand...
Click to collapse
I didn't even know there was one those lol I put a skinomi skin on mine hoping that it's raised just enough xD

Well, my first tip would be to not place your note 4 on a textured surface, press it down into the textured surface and then rubbing it vigorously against it, with your pressure RIGHT on the lens.
Other than that, just use it normally. Dont keep it in a bag of quarters, dont hack at it with nails, dont keep it with your keys in a pocket... The usual nobrainer things.
Should be totally fine. When I place it on a table, the lens doesnt touch the table.

Magnus3D said:
Normally there should be no need to worry unless you intend to drag your phone across a rocky road. It's protected by a veryt scratchresistant glass, simlar to sapphire glass. It can stand a heavy beating and still perform.
The only real problem is fat from your fingers smearing onto the protective glass, this will cause weird looking arefacts with highlights so make sure you keep it clean.
/ Magnus
Click to expand...
Click to collapse
/thread - really, the glass on the camera lens is the strongest glass you will find on your mobile device - applies to any phone.

Couldn't resist...cut out an extra screen protector and stuck it on the camera glass lol

lawtq said:
Correct. Good protection. Or you could get the Nillkin Amazing H+ 9H Hardness Anti-Explosion Tempered Glass*for the note 4, it comes with 2 mini tempered glass camera lense protectors
Click to expand...
Click to collapse
Never heard of this before.. Have Otterbox but realized my camera lens for smashed today while outside doing yard work... This what you use? Installation hard? Got URL? Thanks in advance.

DrDank said:
Never heard of this before.. Have Otterbox but realized my camera lens for smashed today while outside doing yard work... This what you use? Installation hard? Got URL? Thanks in advance.
Click to expand...
Click to collapse
I liked it. Gad the halo effect though unfortunately. But loved the 2 little camera screen protector too! Easy install.

Sorry, don't d have much time to search, url anyone it could i get camera protection for otterbox?

Camera Lens Protector

Does anyone know of a "Camera Lens Protector" that doesn't interfere with flash while recording video and taking pictures?

The builtin factory one... replace if needed.

I've always just got a case that stands tall enough to make sure the camera lens does not come into contact with the surface.

blackhawk said:
The builtin factory one... replace if needed.
Click to expand...
Click to collapse
Where would you buy a factory replacement and how much would it cost?

Steamer2499 said:
Where would you buy a factory replacement and how much would it cost?
Click to expand...
Click to collapse
You're jumping the gun. Google it... Samsung can replace it as can repair centers.
If you don't have a good case the display is more likely to get destroyed. I be more concerned with a good case and screen protector, both will most likely be a pain to find for a new model.
I don't even worry about damaging my cam as it's well protected by the case. The only thing I do is not use it as a hand hold as your fingers are more likely to mar it if you touch it. Even my S4+'s factory cam plastic lense protector is not scratched after many years in the desert.

blackhawk said:
You're jumping the gun. Google it... Samsung can replace it as can repair centers.
If you don't have a good case the display is more likely to get destroyed. I be more concerned with a good case and screen protector, both will most likely be a pain to find for a new model.
I don't even worry about damaging my cam as it's well protected by the case. The only thing I do is not use it as a hand hold as your fingers are more likely to mar it if you touch it. Even my S4+'s factory cam plastic lense protector is not scratched after many years in the desert.
Click to expand...
Click to collapse
The lens protectors that I did buy was prefect for protecting all three lens and taking pictures and video recording. But as soon as you use the flash for either, the flash glare from the corner of the lens protectors was the problem.

Steamer2499 said:
The lens protectors that I did buy was prefect for protecting all three lens and taking pictures and video recording. But as soon as you use the flash for either, the flash glare from the corner of the lens protectors was the problem.
Click to expand...
Click to collapse
I use the wet apply Gorilla IQ Sheild for my display. "Self healing" urethane that last a long time and stays put. Something like that but with any added layer you increase the refraction index.
Other undesirable things can happen with uncoated and/or poorly placed optical elements like back reflections and flaring.
Who knows maybe Samsung optic engineers really knew what they were doing... don't screw it up.
People want to protect the lense protector... doesn't really make much sense. This isn't a high dollar front lense, it's a piece of ordinary glass or polycarbonate.
Lense protector protectors are a gimmick.
Worry about a good case and screen protector instead because you will need them.

Question Will rear camera protectors damage the painted area on the S21 Ultra when trying to remove them?

Just wondering the sticky residue from a camera protector would damage the painted surface of the rear cameras on the S21 Ultra?
Jerryrig shows that this painted surface scratches pretty easily and just wondering if using a camera protector is a good idea or not?
Seen several people saying that camera protectors are hard to remove from the Ultra, broke, cracked and damaged the painted area trying to remove.
Have the Whitestone dome ones coming and think I'll hold off installing these.

felloffthetruck said:
Seen several people saying that camera protectors are hard to remove from the Ultra, broke, cracked and damaged the painted area trying to remove.
Click to expand...
Click to collapse
I was looking at the customer reviews for the LK, ESR, Spigen, and amFilm S21 Ultra camera screen protectors and I did not find anyone complaining about the damaged painted area when removing the protector. Where did you find these comments? I found some complaints about the blurriness of the photos, though.

aslg said:
I was looking at the customer reviews for the LK, ESR, Spigen, and amFilm S21 Ultra camera screen protectors and I did not find anyone complaining about the damaged painted area when removing the protector. Where did you find these comments? I found some complaints about the blurriness of the photos, though.
Click to expand...
Click to collapse
Seen several different ones on Amazon reviews. Here is one from the AmFilm camera protectors:
Avi lupo
1.0 out of 5 stars Unless you want to ruin your camera DO NOT BUY
Reviewed in the United States on January 28, 2021
Color: BlackVerified Purchase
These things are near impossible to take off. I misplaced mine and wanted to try reapplying a new one. While attempting to take it off it shattered into a million piece by piece, while still being glued onto my camera. Wanted to protect my camera but instead I had it scratched by the shattered protector. Took me over an hour to get it completely off, and by then the damage had already been done BUYER BEWARE

It already has a built in factory lens/camera protector. Nothing else other than a good case with a raised cam module guard is needed.
My 10+ is nearly a year and a half old. I live in a desert town; wind, sand, dust and grit. Zero damage to the plastic factory cam protector.
I use a Zizo Bolt case with a raised cam guard (do not use a case cam hole as a finger grip to take it out of your pocket!).
All I do is avoid touching it except to clean it occasionally with a dry microfiber cloth.
Just keep your fingers* off of it and you'll be fine.
They're replaceable anyway...
*dry finger/palms are abrasive. Enough so as to be able to polish glass. Any grit or sand on your finger can easily mar the surface.

I agree that the amfilm has very, very strong adhesive. It was hard to remove but thankfully it didn't crack and the paint didn't come off.
It caused condensation due to the gap between the protector and the lens glass so I had to take it out. And if you do want a camera protector, make sure the are cutouts for the camera holes. Kinda negates the protector but I suppose that's if you want to protect the metal frame.

I posted in the other thread, but mine shattered because of the adhesive and caused light scratches on the metal.
It's different from past generations since these camera bumps are metal. Old tempered glass adhesive isn't strong enough and they're using stronger stuff.

felloffthetruck said:
Just wondering the sticky residue from a camera protector would damage the painted surface of the rear cameras on the S21 Ultra?
Jerryrig shows that this painted surface scratches pretty easily and just wondering if using a camera protector is a good idea or not?
Seen several people saying that camera protectors are hard to remove from the Ultra, broke, cracked and damaged the painted area trying to remove.
Have the Whitestone dome ones coming and think I'll hold off installing these.
Click to expand...
Click to collapse
Possible, I do not know these products.
But as some one else said, the glass itself very probably don't need protection. The aluminium though, yeah.
I plan to get a dbrand skin which is just a sticker that will cover the metal part, and a case as well for when on a trip (remember those?) and such.
In my opinion, that should be enough.

I bought the whitestone protector, didn't think about taking it off...

felloffthetruck said:
Seen several different ones on Amazon reviews. Here is one from the AmFilm camera protectors...
Click to expand...
Click to collapse
Thanks! If I understood it right, the scratches on the aluminum camera housing were not caused by the strong glue but by the glass shards (glass is harder than aluminum).
I was thinking to protect just the camera housing with a dbrand camera skin. The black carbon fiber skin looks very nice on the phantom black S21 Ultra. It is also very cheap.
Did anyone have any issue removing dbrand skins from a metal camera housing?

These things are close to difficult to take off. I lost mine and needed to have a go at reapplying another one. While endeavoring to take it off it broke into 1,000,000 piece by piece,if you want while as yet being stuck onto my camera. Needed to safeguard my camera yet rather I had it but if you want to paint the mobile you can also use floor paint to paint the mobile and scratched by the broke defender. Took me more than an hour to get it totally off, and by then the harm had proactively been done Purchaser Be careful....

DaniellaAmato87 said:
These things are close to difficult to take off. I lost mine and needed to have a go at reapplying another one. While endeavoring to take it off it broke into 1,000,000 piece by piece,if you want while as yet being stuck onto my camera. Needed to safeguard my camera yet rather I had it but if you want to paint the mobile you can also use floor paint to paint the mobile and scratched by the broke defender. Took me more than an hour to get it totally off, and by then the harm had proactively been done Purchaser Be careful....
Click to expand...
Click to collapse
See my above post. The less you screw around with the builtin factory protector the better off it will be.