[SOLVED] No imei and ROM install seems incomplete - One (M7) Q&A, Help & Troubleshooting

Hi all,
First, i would like to apologize for my poor english.
Then, i have some problems with my HTC M7.
Yesterday, when i woke up, my phone was shut down. I thought that i had no battery anymore. (i had less than 10% when i went to bed so, it's possible).
Well, plug my phone in the charger, and wait... and, when he booted, i could not use my phone as usually: no PIN code, no ability to make phone call... After a few minutes, i saw that the IMEI zone was empty.
I was not worrying, and though that a simple cache cleearing could help me... Well, it was not...
Now, i'm not able to use my phone AT ALL.
He's rooted, S-OFF, and i tried to install 3 or 4 different roms but same problem.
The ROM install has some difficulties to be finished: in fact, on each rom i tried to install, i have now the same problem;
-> No IMEI
-> When i want to compose a phone number, the dialer does not appear
-> A message "com.htc.htcdialer isn't responding" appears every minute...
I tried to install another dialer, same problem...
I'm really lost.
hope that somebody could help me?
Regards,
Cyril
PS: For information, after the incident, my phone was not rooted anymore and was S-ON, i don't know if it was already the case before the incident...

UPDATE: Finally, i succeed to install a rom.
Everything works fine now, but still no imei present...

This is a firmware problem. It seems your firmware has corrupted.Best way is download a RUU for ur phone and just flash it.K ur s-on>can u get me a getvar all.
access ur bootloader select fastboot and then type " fastboot getvar all " without quotes.

Slim Shady said:
This is a firmware problem. It seems your firmware has corrupted.Best way is download a RUU for ur phone and just flash it.K ur s-on>can u get me a getvar all.
access ur bootloader select fastboot and then type " fastboot getvar all " without quotes.
Click to expand...
Click to collapse
Hi,
I've just started to work, but i will send you these informations as soon as possible.
Thanks a lot.

Slim Shady said:
This is a firmware problem. It seems your firmware has corrupted.Best way is download a RUU for ur phone and just flash it.K ur s-on>can u get me a getvar all.
access ur bootloader select fastboot and then type " fastboot getvar all " without quotes.
Click to expand...
Click to collapse
Re Slim Shady,
Here are the results:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: XXX
(bootloader) imei: XXX
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__203
(bootloader) battery-status: good
(bootloader) battery-voltage: 3828mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d16dc66985
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.070s
I'm not sure about what to do.
May i have to switch on s-on? Or relock the bootloader?
I don't really know how to install a new firmware...

an idea?

Leodagan said:
Re Slim Shady,
Here are the results:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__203
(bootloader) battery-status: good
(bootloader) battery-voltage: 3828mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d16dc66985
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.070s
I'm not sure about what to do.
May i have to switch on s-on? Or relock the bootloader?
I don't really know how to install a new firmware...
Click to expand...
Click to collapse
first please edit ur post and remove the imei and serial no from the post.Regarding ur problem download and flash this RUU http://www.htc1guru.com/dld/ruu_m7_...0-38r-1157-04l_release_353069_signed_2-1-exe/
Start the ruu and follow instructions like any windows application.If u have any questions feel free to ask .

Slim Shady said:
first please edit ur post and remove the imei and serial no from the post.Regarding ur problem download and flash this RUU http://www.htc1guru.com/dld/ruu_m7_...0-38r-1157-04l_release_353069_signed_2-1-exe/
Start the ruu and follow instructions like any windows application.If u have any questions feel free to ask .
Click to expand...
Click to collapse
just a quick note, he's s-off, personally I would go with a 1.xx ruu (except 1.20.xxx.x)

Slim Shady said:
first please edit ur post and remove the imei and serial no from the post.Regarding ur problem download and flash this RUU http://www.htc1guru.com/dld/ruu_m7_...0-38r-1157-04l_release_353069_signed_2-1-exe/
Start the ruu and follow instructions like any windows application.If u have any questions feel free to ask .
Click to expand...
Click to collapse
Done for IMEI and Serial NO, thx.
I've started to download it.
nkk71 said:
just a quick note, he's s-off, personally I would go with a 1.xx ruu (except 1.20.xxx.x)
Click to expand...
Click to collapse
Ok, so have i to switch on s-on?
Also, have i stay on unlocked mode?
Thanks guys, really.

Guys,
I tried to install the RUU but it failed:
Update from 3.62.1700.1 to 4.19.401.9, i click on next, then next, then a message (in french so i translate to you):
The update tool cannot update the android phone,
Please obtain the right update tool and try again.
Then, i can only click on ReadMe or Recovery, but nothing relevant after that.

Leodagan said:
Ok, so have i to switch on s-on?
Click to expand...
Click to collapse
Nooooo, do not go s-on!!

nkk71 said:
Nooooo, do not go s-on!!
Click to expand...
Click to collapse
Ok, i haven't done that, thanks ^^
So, now i'm stucked, i don't know what to do. Try another ruu?
I'm actually downloading RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13.3231.27_10.31.1131.05_release_310878_signed.exe, is it ok?

Well, it's not ok, with this rom too i can't update my phone...
Maybe should i have to find a 3.62 RUU in order to update?

Leodagan said:
Well, it's not ok, with this rom too i can't update my phone...
Maybe should i have to find a 3.62 RUU in order to update?
Click to expand...
Click to collapse
What do you mean, can't update... you mean the ruu isn't working?
if so, then get this one: ruu_m7ul_1.28.401.7.zip
AFH mirror: http://www.androidfilehost.com/?fid=23329332407584993
then (after making sure MD5 is correct), rename the file to ruu.zip, and:
In bootloader/FASTBOOT USB, flash it:
fastboot oem rebootRUU
fastboot flash zip ruu.zip
fastboot flash zip ruu.zip <- yes TWICE, the first one will report “failed flush again”, the second one will succeed.
fastboot reboot-bootloader
there is no need to relock bootloader or anything else with S-OFF (and stay S-OFF, don't even think about S-On!!)
if you want to see what kind of output to expect, check my guide http://forum.xda-developers.com/showthread.php?p=47794257&postcount=8 (post 8) which has a some visual feedback of what to expect. (disregard the guide, i'm just linking it for you to get an idea of what kind of output to expect)
Oh and you cannot do this on Win 8.1!!! http://forum.xda-developers.com/showpost.php?p=52135024&postcount=2 FAQ#1

nkk71 said:
What do you mean, can't update... you mean the ruu isn't working?
Click to expand...
Click to collapse
Yep, same message than the other ruu:
Update from 3.62.1700.1 to 1.2*******, i click on next, then next, then a message :
The update tool cannot update the android phone,
Please obtain the right update tool and try again.
I'll try your last post, i let you know when finished.

Leodagan said:
Yep, same message than the other ruu:
Update from 3.62.1700.1 to 1.2*******, i click on next, then next, then a message :
The update tool cannot update the android phone,
Please obtain the right update tool and try again.
I'll try your last post, i let you know when finished.
Click to expand...
Click to collapse
HELL YES IT WORKS!!!
Thank you thank you !!
(well for the moment i'm in 4.1.2, i will wait a moment before flashing a new recovery, a new rom and all the stuff :laugh::laugh::laugh

Leodagan said:
HELL YES IT WORKS!!!
Thank you thank you !!
(well for the moment i'm in 4.1.2, i will wait a moment before flashing a new recovery, a new rom and all the stuff :laugh::laugh::laugh
Click to expand...
Click to collapse
and IMEI, baseband etc are all working again?

Yep, all is functional again... thanks again !

Leodagan said:
Yep, all is functional again... thanks again !
Click to expand...
Click to collapse
:good: :good: my pleasure.
BTW, if you going for 4.4 ROMs, use TWRP: get TWRP from:
2.6.3.3: http://techerrata.com/browse/twrp2/m7
or 2.6.3.4: http://techerrata.com/browse/twrp2/m7ul
(make sure MD5 is correct, that site does not play nice with download managers)
2.7.0.4b: http://forum.xda-developers.com/showthread.php?t=2708134
in bootloader/FASTBOOT USB:
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
PS: for future reference about s-off vs s-on, check here http://forum.xda-developers.com/showpost.php?p=52135024&postcount=2 (under Not so FAQ #2)
if all is good now, can you also edit main thread title to include [SOLVED], thanks
edit the first post -> at the bottom of the edit window, click Go Advanced, and then you can edit main title

Done.
Thank you again, guys.

Related

[Q] M7 RUU failed stuck on RUU Boot

Hi, I bought a used m7 which was rooted and tried to return to stock. However the RUU installer failed and im now stuck with in bootloader which says TAMPERED and RELOCKED
here is fastboot getvar all:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: XXX
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__Y13
(bootloader) battery-status: good
(bootloader) battery-voltage: 3887mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: dirty-d16dc66985
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.080s
Can anyone tell me which ruu installer i should use or give any other suggestions?
Thanks
zirbenaum said:
Hi, I bought a used m7 which was rooted and tried to return to stock. However the RUU installer failed and im now stuck with in bootloader which says TAMPERED and RELOCKED
here is fastboot getvar all:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: XXX
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__Y13
(bootloader) battery-status: good
(bootloader) battery-voltage: 3887mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: dirty-d16dc66985
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.080s
Can anyone tell me which ruu installer i should use or give any other suggestions?
Thanks
Click to expand...
Click to collapse
do you know how to use adb and fastboot, also do you have drivers installed on your computer ?
Seanie280672 said:
do you know how to use adb and fastboot, also do you have drivers installed on your computer ?
Click to expand...
Click to collapse
yes i have drivers installed and i got the this info with fastboot. adb doesn't seem to recognize the phone though.
zirbenaum said:
yes i have drivers installed and i got the this info with fastboot. adb doesn't seem to recognize the phone though.
Click to expand...
Click to collapse
adb wont work in the bootloader, heres where the fun starts:
ADB commands only work in a booted rom or in a custom recovery, they don't work in the bootloader
Fastboot commands only work in the bootloader, they don't work in a booted rom or recovery.
phew.....glad we got that bit out of the way
first thing is first, can you start downloading this, its your reset rom file, but the servers are a little slow, that's why I say start, when its finished downloading, rename it to rom.zip for ease, and put it in the same folder on your computer where adb and fastboot files are please, heres the file: http://www.htc1guru.com/dld/guru_reset_m7_2-24-401-8-zip/
whilst that is downloading, you will need to goto HTC Dev and unlock your bootloader, just follow the instructions they give you, its a piece of cake, and as you already have adb and fastboot, you wont need to download the 3 files later on that they tell you to download: http://www.htcdev.com/bootloader/
your flags will then turn to UNLOCKED and TAMPERED, this is normal, nothing to worry about.
report back when done.
Seanie280672 said:
report back when done.
Click to expand...
Click to collapse
Ok i unlocked the bootloader and the phone booted! whew
Thank you so much!
It is till in rooted state tough but i guess it's better than bricked.
zirbenaum said:
Ok i unlocked the bootloader and the phone booted! whew
Thank you so much!
It is till in rooted state tough but i guess it's better than bricked.
Click to expand...
Click to collapse
the phone booted ? lol, that's strange, we're not finished yet lol, strange that it didn't boot whilst relocked but booted whilst unlocked.
Seanie280672 said:
the phone booted ? lol, that's strange, we're not finished yet lol, strange that it didn't boot whilst relocked but booted whilst unlocked.
Click to expand...
Click to collapse
Well I am not complaining The download takes more than two hours. What should i do after it is done?
zirbenaum said:
Well I am not complaining The download takes more than two hours. What should i do after it is done?
Click to expand...
Click to collapse
you could try one of the alternative links on that site, however, if your happy with your phone the way it is now then you wont need that file.
just scroll down the page a little and theres 2 alternative download links.
the ksn
Seanie280672 said:
you could try one of the alternative links on that site, however, if your happy with your phone the way it is now then you wont need that file.
just scroll down the page a little and theres 2 alternative download links.
Click to expand...
Click to collapse
I was hoping to get it in vanilla state but after this nightmare maybe it is better to leave it as it is until ive done some more research
zirbenaum said:
I was hoping to get it in vanilla state but after this nightmare maybe it is better to leave it as it is until ive done some more research
Click to expand...
Click to collapse
whats vanilla state ?, sorry im not familiar with that term, guess we can both teach each other something here
shall
Seanie280672 said:
whats vanilla state ?, sorry im not familiar with that term, guess we can both teach each other something here
Click to expand...
Click to collapse
Its software that is not customized. Wikipedia says:
Computer software, and sometimes also other computing-related systems like computer hardware or algorithms, is called Vanilla when not customized from its original form, meaning that it is used without any customizations or updates applied to it.
http://en.wikipedia.org/wiki/Vanilla_software
Maybe actual vanilla would be stock android without any htc customizatios though.
zirbenaum said:
Its software that is not customized. Wikipedia says:
Computer software, and sometimes also other computing-related systems like computer hardware or algorithms, is called Vanilla when not customized from its original form, meaning that it is used without any customizations or updates applied to it.
http://en.wikipedia.org/wiki/Vanilla_software
Maybe actual vanilla would be stock android without any htc customizatios though.
Click to expand...
Click to collapse
ahh I see, now that's where we were heading originally, to get pure stock rom you will need to download that file I linked you too earlier, and as your phone is booting now, just copy the file to your internal storage not into the adb and fastboot folder.
i'll tell you what to do next if you want to proceed.
Seanie280672 said:
ahh I see, now that's where we were heading originally, to get pure stock rom you will need to download that file I linked you too earlier, and as your phone is booting now, just copy the file to your internal storage not into the adb and fastboot folder.
i'll tell you what to do next if you want to proceed.
Click to expand...
Click to collapse
well the download is going to take forever and it is already 1 am here so maybe i have to do this some other time. But you can give the instuction and i'll do this later.
You have been very helpful, thank you again.
zirbenaum said:
well the download is going to take forever and it is already 1 am here so maybe i have to do this some other time. But you can give the instuction and i'll do this later.
You have been very helpful, thank you again.
Click to expand...
Click to collapse
when the file has finished downloading, check the MD5 and file size before copying it to your phone, just to make sure its not corrupt.
then what you will have to do, is copy that file you are downloading to your internal storage, then reboot your phone to the bootloader and plug it into the computer,. make sure it says fastboot usb on the screen.
then download this file: http://techerrata.com/file/twrp2/m7/openrecovery-twrp-2.6.3.3-m7.img
and put it in the same folder as adb and fastboot on your computer, open a command window (CMD) in that folder by holding control + shift + right mouse click in any white area of that folder and select open a command window here, then type the following commands one at a time, wait for each command to finish before issuing the next.
Code:
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
once that is done, unplug your phone and enter recovery using the volume buttons to navigate and the power button to select.
when in recovery goto wipe and just swipe to factory reset, do not advanced wipe.
when done, goto install and in the list it gives you, select the file you downloaded and copied to your internal storage, swipe to begin the install, follow the instructions, and when it gives you the options, select yes wipe data, yes install stock radio and yes install stock recovery.
once installation is complete, it will ask you to reboot, when you select reboot, if the screen goes black (this doesn't always happen, most times it reboots without any problems), just hold down the power button until the lights on the bottom flash 10 to 15 times and then the phone will boot to full stock rom with OTA ability.
I know this sounds long and confusing, but you will see as you go along its easy, just don't skip any steps.
if you have any problems, just report back here, but if you follow my instructions it should run like clockwork.
Download official ruu from here http://www.htc1guru.com/downloads/ruu-file-downloads/ check the CID ... CID codes are given vit RUU .yrs is HTC_Y13 So try yur cid supported ruu. bootloader must b locked.

[Q] Bad Flash Or Soft Bricked??

Hey guys, i never really need anyones help but this is annoying me now. My problem is that i have converted my HTC One to the google edition firmware and all was going great. Earlier today i wanted to try the latest MIUI Rom so i downloaded it and flashed it. Everything went smoothly until it came to reboot (i totally wiped phone before i installed MIUI) and now it wont turn on or charge and show only signs of life in the form of fastboot which i can use getvar all to pull my system info. Some fields are blank which arent meant to be. I cannot flash anything as screen wont turn on or even vibrate. Kind of at a loss now and any help will be appreciated.
Noel
noel8211 said:
Hey guys, i never really need anyones help but this is annoying me now. My problem is that i have converted my HTC One to the google edition firmware and all was going great. Earlier today i wanted to try the latest MIUI Rom so i downloaded it and flashed it. Everything went smoothly until it came to reboot (i totally wiped phone before i installed MIUI) and now it wont turn on or charge and show only signs of life in the form of fastboot which i can use getvar all to pull my system info. Some fields are blank which arent meant to be. I cannot flash anything as screen wont turn on or even vibrate. Kind of at a loss now and any help will be appreciated.
Noel
Click to expand...
Click to collapse
not positive but the MIUI rom may require a special version custom recovery. did you check that you have the correct recovery before flashing ?
clsA said:
not positive but the MIUI rom may require a special version custom recovery. did you check that you have the correct recovery before flashing ?
Click to expand...
Click to collapse
hey thanks for replying. i used the latest 2.8.0.0 twrp recovery. my getvar all is:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: UNKNOWN
(bootloader) serialno:
(bootloader) imei: 355195000000010
(bootloader) meid: 00000000000000
(bootloader) product:
(bootloader) platform: HBOOT-8064
(bootloader) modelid: *********
(bootloader) cidnum:
(bootloader) battery-status: good
(bootloader) battery-voltage: 3662mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: UNKNOWN
(bootloader) commitno-bootloader: dirty-e02a9046
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.039s
C:\Program Files (x86)\Minimal ADB and Fastboot>
im not sure if thats all ok or not
noel8211 said:
hey thanks for replying. i used the latest 2.8.0.0 twrp recovery. my getvar all is:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: UNKNOWN
(bootloader) serialno:
(bootloader) imei: 355195000000010
(bootloader) meid: 00000000000000
(bootloader) product:
(bootloader) platform: HBOOT-8064
(bootloader) modelid: *********
(bootloader) cidnum:
(bootloader) battery-status: good
(bootloader) battery-voltage: 3662mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: UNKNOWN
(bootloader) commitno-bootloader: dirty-e02a9046
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.039s
C:\Program Files (x86)\Minimal ADB and Fastboot>
im not sure if thats all ok or not
Click to expand...
Click to collapse
Is that your real MID and CID?
You should correct those and RUU back to stock and start over. Your phone is having an identity crisis [emoji2]
clsA said:
Is that your real MID and CID?
You should correct those and RUU back to stock and start over. Your phone is having an identity crisis [emoji2]
Click to expand...
Click to collapse
lol yeah thats what it said after i flashed MIUI. what would be the best way to sort them out?
Theirs a MID change tool you use in Twrp
And changing the CID is a simple fastboot command
clsA said:
Theirs a MID change tool you use in Twrp
And changing the CID is a simple fastboot command
Click to expand...
Click to collapse
ah CID will be easy but MID wont as i cant even get to recovery or anything. not even bootloader. I didnt realise MIUI would screw up this bad, or could it be something to do with the 'latest' twrp being too new?
noel8211 said:
ah CID will be easy but MID wont as i cant even get to recovery or anything. not even bootloader. I didnt realise MIUI would screw up this bad, or could it be something to do with the 'latest' twrp being too new?
Click to expand...
Click to collapse
Flash TWRP 2.6.3.3 it's the most reliable version
clsA said:
Flash TWRP 2.6.3.3 it's the most reliable version
Click to expand...
Click to collapse
i have been trying that for a while now but keep getting remote: not allowed errors
Is your bootloader relocked?
clsA said:
Is your bootloader relocked?
Click to expand...
Click to collapse
i didnt relock it after i flashed. can it relock itself?
noel8211 said:
i didnt relock it after i flashed. can it relock itself?
Click to expand...
Click to collapse
No and don't relock it. Their are people stuck and can't unlock coming from GPE
clsA said:
No and don't relock it. Their are people stuck and can't unlock coming from GPE
Click to expand...
Click to collapse
ah thats good then. i never bothered to re-lock it when i flashed the firmware as didnt see the point. all the guides i can find are to change things through adb which doesnt work as comupet dont pick it up. when however i do a fastboot devices, my device instaed of numbers , is ???????????????. im sure thats not normal.
by the way, thanks for helping me
noel8211 said:
ah thats good then. i never bothered to re-lock it when i flashed the firmware as didnt see the point. all the guides i can find are to change things through adb which doesnt work as comupet dont pick it up. when however i do a fastboot devices, my device instaed of numbers , is ???????????????. im sure thats not normal.
by the way, thanks for helping me
Click to expand...
Click to collapse
Well adb is only going to work in recovery so ignore that
So you flashed firmware ? Which one?
Did you try and get in stock recovery and do a factory reset
clsA said:
Well adb is only going to work in recovery so ignore that
So you flashed firmware ? Which one?
Did you try and get in stock recovery and do a factory reset
Click to expand...
Click to collapse
I flashed the latest MIUI from MIUIandroid and then just rebooted afterwards. the phone seems dead but i can get fastboot to partially work as my computer recognises it
noel8211 said:
I flashed the latest MIUI from MIUIandroid and then just rebooted afterwards. the phone seems dead but i can get fastboot to partially work as my computer recognises it
Click to expand...
Click to collapse
I'm going to need my PC to get you the links you need to try and get back up and running. I'll be back home in an hour or so
clsA said:
I'm going to need my PC to get you the links you need to try and get back up and running. I'll be back home in an hour or so
Click to expand...
Click to collapse
Thank you very much, i really appreciate it
noel8211 said:
Thank you very much, i really appreciate it
Click to expand...
Click to collapse
Ok I'm back
First lets try and get a working recovery on your phone
download and flash this >> twrp-recovery-2.7-m7-nobcb.img
fastboot flash recovery twrp-recovery-2.7-m7-nobcb.img
fastboot erase cache
fastboot reboot-bootloader
Now enter recovery
We are following nkk71 guide here if you want to jump ahead
http://forum.xda-developers.com/showthread.php?t=2739126
also could you give me the name of the MIUI you downloaded
clsA said:
Ok I'm back
First lets try and get a working recovery on your phone
also could you give me the name of the MIUI you downloaded
Click to expand...
Click to collapse
i think he has a lot more to fix than just the misc partition, not sure if this is fixable, i believe the updater-script wrote to hboot partition, and he's unlikely to even be able to "fastboot oem rebootRUU" to fix that,
if by some chance he's able to get to recovery, then he'd have to manually dd all the messed up partitions.
OP, can you upload the updater-script (it's in <nameofrom>zip /META-INF/com/google/android) to pastebin (or zip it and attach it here).
nkk71 said:
i think he has a lot more to fix than just the misc partition, not sure if this is fixable, i believe the updater-script wrote to hboot partition, and he's unlikely to even be able to "fastboot oem rebootRUU" to fix that,
if by some chance he's able to get to recovery, then he'd have to manually dd all the messed up partitions.
OP, can you upload the updater-script (it's in <nameofrom>zip /META-INF/com/google/android) to pastebin (or zip it and attach it here).
Click to expand...
Click to collapse
yeah this could get complicated, I don't know the actual MIUI he used and he mentioned flashing a firmware, I hope he just meant flash a rom.

No OS, S-ON need desperate help

I need really bad help with my phone, it's s-on i cant install any roms and i cant restore from a backup anymore, i have twrp installed as of now, I have tried every method for getting s - off in the past but that was with a custom crappy rom so it didnt work.
Att htc one m7 32gb please add me on skype, i need direct help and i cannot just waiting on somebody to reply to this thread, please i seek desperate help my skype name is rtorr724, please i need someone that knows a lot about android and could help me fix this problem.
i can give you any other info you may need on skype to help me fix my problem. thanks.
rtorr724 said:
I need really bad help with my phone, it's s-on i cant install any roms and i cant restore from a backup anymore, i have twrp installed as of now, I have tried every method for getting s - off in the past but that was with a custom crappy rom so it didnt work.
Att htc one m7 32gb please add me on skype, i need direct help and i cannot just waiting on somebody to reply to this thread, please i seek desperate help my skype name is rtorr724, please i need someone that knows a lot about android and could help me fix this problem.
i can give you any other info you may need on skype to help me fix my problem. thanks.
Click to expand...
Click to collapse
Reboot into fastboot mode.
Hold Power + Volume Down until, select Fastboot.
Run this command:
Code:
fastboot getvar all
We can then get the CID/Model and Fastboot version so you can use an RUU to recover the device.
DennisBold said:
Reboot into fastboot mode.
Hold Power + Volume Down until, select Fastboot.
Run this command:
Code:
fastboot getvar all
We can then get the CID/Model and Fastboot version so you can use an RUU to recover the device.
Click to expand...
Click to collapse
I did not know what to look for so i just copy nd pasted all of it
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4T.24.3218.09
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: 000000000
(bootloader) imei: 0000000000
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3959mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-c6bbb6d4
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
rtorr724 said:
I did not know what to look for so i just copy nd pasted all of it
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4T.24.3218.09
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3959mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-c6bbb6d4
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
you can use that RUU to restore your phone: http://www.htc1guru.com/2014/03/att-ruu/
with s-on you must have a locked or re-locked bootloader use it.
and btw, remove imei and serialno from your above post.
alray said:
you can use that RUU to restore your phone:
with s-on you must have a locked or re-locked bootloader use it.
and btw, remove imei and serialno from your above post.
Click to expand...
Click to collapse
I install it through sideload correct?
also what could someone do with my imei and serialno?
rtorr724 said:
I install it through sideload correct?
Click to expand...
Click to collapse
No its an .exe file. You must launch that executable using a windows pc with the phone connected to it and booted in bootloader mode.
also what could someone do with my imei and serialno?
Click to expand...
Click to collapse
Someone could use it to clone your phone.
alray said:
No its an .exe file. You must launch that executable using a windows pc with the phone connected to it and booted in bootloader mode.
Someone could use it to clone your phone.
Click to expand...
Click to collapse
Well thank you for telling me about it I wouldn't have wanted that to happen.
The download is pretty slow so when its done ill post back here with my results
rtorr724 said:
Well thank you for telling me about it I wouldn't have wanted that to happen.
The download is pretty slow so when its done ill post back here with my results
Click to expand...
Click to collapse
ok, also make sure to check that the MD5 value of your downloaded file will match the value given on the website.
should be: 5f121d72b8fa3f6f1704588467752605
you can use winMd5 program to check the value.
alray said:
ok, also make sure to check that the MD5 value of your downloaded file will match the value given on the website.
Click to expand...
Click to collapse
The program failed to work and got error 155, the md5 value matched and my phone just went to a black htc screen.
Like i said before if someone could add me on skype so it would be easier to help that would be great
rtorr724 <- skype
rtorr724 said:
The program failed to work and got error 155, the md5 value matched and my phone just went to a black htc screen.
Like i said before if someone could add me on skype so it would be easier to help that would be great
rtorr724 <- skype
Click to expand...
Click to collapse
is your bootloader locked or unlocked?
alray said:
is your bootloader locked or unlocked?
Click to expand...
Click to collapse
unlocked
rtorr724 said:
unlocked
Click to expand...
Click to collapse
so go back and read post #4 again...
alray said:
so go back and read post #4 again...
Click to expand...
Click to collapse
._. im really stupid xD
so what do i do now?
rtorr724 said:
._. im really stupid xD
so what do i do now?
Click to expand...
Click to collapse
relock the bootloader and run the ruu....
to lock the bootloader:
Code:
fastboot oem lock
alray said:
relock the bootloader and run the ruu....
to lock the bootloader:
Code:
fastboot oem lock
Click to expand...
Click to collapse
Thanks so much! but how do i get unlocked again?
rtorr724 said:
Thanks so much! but how do i get unlocked again?
Click to expand...
Click to collapse
you can unlock again the same way you did the first time, using the unlock_code.bin you have received from htcdev.com. if the unlock code you already have doesnt work anymore, request a new unlock code by submitting you identifier token again.
alray said:
you can unlock again the same way you did the first time, using the unlock_code.bin you have received from htcdev.com. if the unlock code you already have doesnt work anymore, request a new unlock code by submitting you identifier token again.
Click to expand...
Click to collapse
I have one last problem, i got s-off and everything and now im trying to get cm12 5.0 and everytime i try to install it, it returns with the error
E:Error in /data/media/0/cm.zip
(Status 0)
Installation aborted.
And above that it says a bunch of stuff of failed to mount /dev/block/platform/msm_sdcc.1/by-name/system at /system:no such file or directory
and then it says the same thing for the unmount
rtorr724 said:
I have one last problem, i got s-off and everything and now im trying to get cm12 5.0 and everytime i try to install it, it returns with the error
E:Error in /data/media/0/cm.zip
(Status 0)
Installation aborted.
And above that it says a bunch of stuff of failed to mount /dev/block/platform/msm_sdcc.1/by-name/system at /system:no such file or directory
and then it says the same thing for the unmount
Click to expand...
Click to collapse
Which recovery are you using?
DennisBold said:
Which recovery are you using?
Click to expand...
Click to collapse
TWRP and CWM i get an error for both, i think its because when I wipe data/factory reset it gets rid of systtem
rtorr724 said:
TWRP and CWM i get an error for both, i think its because when I wipe data/factory reset it gets rid of systtem
Click to expand...
Click to collapse
I was more or less asking for your preference.
Your phone has partitions of memory which hold data, and when you update or install a custom ROM, the recovery utility mounts the partitions so they can be accessed to write and read data. Android does this every-time you turn on your phone. Formatting a partition doesn't delete it, it simply removes everything. CyanogenMod incorporated "block by name" mounting. Which basically makes it easier to mount partitions without being device specific.
Try this version of TWRP: http://techerrata.com/file/twrp2/m7/openrecovery-twrp-2.7.1.1-m7.img
Anything above 2.7.1.1 should work, anything below will not.
For ClockWorkMod anything above 6.0.4.8 will work.

[Q] No SO, Drivers Problems, PLEASE HELP

Hi I'm going crazy right now, I really need some help, here's the history:
Today I bought a htc one m7 from a girl and when she was restoring it I saw that it was with a custom recovery, I didnt care about it becouse anyway I was going to install it some day. After that I went home and started searching some lollipop rom.
Well I downloaded it and copied it to the internal storage, I was ready to flash so I did it.
After flashing the rom it begins to bootloop, so I thougt "ok, it maybe need just a wipe" so I wiped it, as it didnt solved the problem I wiped again but this time with all boxes checked, after that y realized that I was wiping EVERYTHING (It happened before in a nexus 5 and 4).
Ok, I thought f**k it, I'll push the files with adb and problem solved, but when I conected the phone to the pc it has now driver problems, I cant get adb to work, neither fasboot, I installed and uninstalled al drivers I found on the internet, I really dont know what else to do.
If I conect the phone with the pc in fastboot mode in devices manager it says that the usb device ist recognized and something like that there is an error with the number.
And when I conect it in recovery mode it says "one" with the exclamation symbol, I red a lot of posts about how to solve it, but when I force install the drivers nothing happens.
Help me please, I dont know what more to do. And sorry about my english
If you need some information/pictures, just ask for it
Im new with this phone and I have no idea what to do
nachoy9 said:
Hi I'm going crazy right now, I really need some help, here's the history:
Today I bought a htc one m7 from a girl and when she was restoring it I saw that it was with a custom recovery, I didnt care about it becouse anyway I was going to install it some day. After that I went home and started searching some lollipop rom.
Well I downloaded it and copied it to the internal storage, I was ready to flash so I did it.
After flashing the rom it begins to bootloop, so I thougt "ok, it maybe need just a wipe" so I wiped it, as it didnt solved the problem I wiped again but this time with all boxes checked, after that y realized that I was wiping EVERYTHING (It happened before in a nexus 5 and 4).
Ok, I thought f**k it, I'll push the files with adb and problem solved, but when I conected the phone to the pc it has now driver problems, I cant get adb to work, neither fasboot, I installed and uninstalled al drivers I found on the internet, I really dont know what else to do.
If I conect the phone with the pc in fastboot mode in devices manager it says that the usb device ist recognized and something like that there is an error with the number.
And when I conect it in recovery mode it says "one" with the exclamation symbol, I red a lot of posts about how to solve it, but when I force install the drivers nothing happens.
Help me please, I dont know what more to do. And sorry about my english
If you need some information/pictures, just ask for it
Im new with this phone and I have no idea what to do
Click to expand...
Click to collapse
go here and read post 2 FAQ 2
http://forum.xda-developers.com/showthread.php?t=2541082
That should get your drivers working
post your fastboot getvar all (minus your serial no and IMEI) and I can try and help you find the correct files for your phone
clsA said:
go here and read post 2 FAQ 2
http://forum.xda-developers.com/showthread.php?t=2541082
That should get your drivers working
post your fastboot getvar all (minus your serial no and IMEI) and I can try and help you find the correct files for your phone
Click to expand...
Click to collapse
Wow THANKS A LOT, I was doing something like that when installing drivers but not that, now I have adb working.
I dont want to do anything more wrong, can you tell me wich file to flash over TWR to get it working? my fastboot shows:
***TAMPERED***
***UNLOCKED***
M7_UL PVT SHIP S-OFF RH
CID-CWS_001
HBOOT-1.44.0000
RADIO-A1.14.3250.13
OpenDPS-v26.120.274.0202
eMMC-boot
May 3 2013,19:16:59:-1
I cant post the getvar becouse I have windows 8.1 and as I saw, fastboot comands doesnt works with windows 8.1 if I have HBOOT-1.44
clsA said:
go here and read post 2 FAQ 2
http://forum.xda-developers.com/showthread.php?t=2541082
That should get your drivers working
post your fastboot getvar all (minus your serial no and IMEI) and I can try and help you find the correct files for your phone
Click to expand...
Click to collapse
I used my grandmas PC
C:\Users\Miriam\Desktop\androidññ\platform-tools>fastboot devices
HT36KW908410 fastboot
C:\Users\Miriam\Desktop\androidññ\platform-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.26.502.12
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: ------
(bootloader) imei: ------
(bootloader) meid: ------
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3868mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.068s
nachoy9 said:
I used my grandmas PC
C:\Users\Miriam\Desktop\androidññ\platform-tools>fastboot devices
HT36KW908410 fastboot
C:\Users\Miriam\Desktop\androidññ\platform-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.26.502.12
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: ------
(bootloader) imei: ------
(bootloader) meid: ------
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3868mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.068s
Click to expand...
Click to collapse
I would use this first
http://dl3.htc.com/application/RUU_...4_10.33E.1718.01L_release_404528_signed_2.exe
clsA said:
I would use this first
http://dl3.htc.com/application/RUU_...4_10.33E.1718.01L_release_404528_signed_2.exe
Click to expand...
Click to collapse
how does it work? I have to put the phone on fastboot mode or in a custom recovery for adb comands?
nachoy9 said:
how does it work? I have to put the phone on fastboot mode or in a custom recovery for adb comands?
Click to expand...
Click to collapse
just leave the phone plugged into the PC and in Fastboot USB mode on the bootloader screen
then run the RUU
clsA said:
just leave the phone plugged into the PC and in Fastboot USB mode on the bootloader screen
then run the RUU
Click to expand...
Click to collapse
Just made it, thanks a lot, do you know how to install updates now? becouse it doesnt find any OTA
nachoy9 said:
Just made it, thanks a lot, do you know how to install updates now? becouse it doesnt find any OTA
Click to expand...
Click to collapse
are you on the AT&T network ?
clsA said:
are you on the AT&T network ?
Click to expand...
Click to collapse
No, Im from Uruguay (South America)
nachoy9 said:
No, Im from Uruguay (South America)
Click to expand...
Click to collapse
I recommend you convert your phone to Developer edition
I posted instructions here for another guy >> http://forum.xda-developers.com/showpost.php?p=58087799&postcount=11
clsA said:
I recommend you convert your phone to Developer edition
I posted instructions here for another guy >> http://forum.xda-developers.com/showpost.php?p=58087799&postcount=11
Click to expand...
Click to collapse
Ill do it, THANKS A LOT
clsA said:
I recommend you convert your phone to Developer edition
I posted instructions here for another guy >> http://forum.xda-developers.com/showpost.php?p=58087799&postcount=11
Click to expand...
Click to collapse
Sorry Im bothering you again, but I tryed to install that RUU and it says that there is an error with the image version or something like that
nachoy9 said:
Sorry Im bothering you again, but I tryed to install that RUU and it says that there is an error with the image version or something like that
Click to expand...
Click to collapse
Did you change your CID?
clsA said:
Did you change your CID?
Click to expand...
Click to collapse
Yes
nachoy9 said:
Yes
Click to expand...
Click to collapse
your on 3.x 502 AT&T
try the 4.X.1540 DE RUU here >> http://www.androidruu.com/getdownlo...8_10.38r.1157.04L_release_353887_signed_3.exe
If it gives you an error flash this firmware then the RUU
https://www.androidfilehost.com/?fid=95887005526790121
fastboot oem rebootRUU
fastboot flash zip firmware.zip
fastboot flash zip firmware.zip
fastboot reboot
clsA said:
your on 3.x 502 AT&T
try the 4.X.1540 DE RUU here >> http://www.androidruu.com/getdownlo...8_10.38r.1157.04L_release_353887_signed_3.exe
If it gives you an error flash this firmware then the RUU
https://www.androidfilehost.com/?fid=95887005526790121
fastboot oem rebootRUU
fastboot flash zip firmware.zip
fastboot flash zip firmware.zip
fastboot reboot
Click to expand...
Click to collapse
Ok, ill try and tomorrow I tell you if it worked, thanks

System UI and Virtual SD card Issue

Guys its urgent. I am using TWRP recovery and wipe the whole phone including internal memory only left system not being wiped yet. Then when i boot to the system i cannot see the status bar! and just a popup window saying that system ui stopped.. and most importantly i cannot use virtual SD card. Cuz now i wanna re-flash the ROM so that i can fix it. But now i cannot even write or read the internal memory meaning that i cannot even download the ROM again and flash it! anyone can help? TAT
Jakob Zhang said:
Guys its urgent. I am using TWRP recovery and wipe the whole phone including internal memory only left system not being wiped yet. Then when i boot to the system i cannot see the status bar! and just a popup window saying that system ui stopped.. and most importantly i cannot use virtual SD card. Cuz now i wanna re-flash the ROM so that i can fix it. But now i cannot even write or read the internal memory meaning that i cannot even download the ROM again and flash it! anyone can help? TAT
Click to expand...
Click to collapse
What is your twrp version
What is your "fastboot getvar all" (don't post imei/sn)
alray said:
What is your twrp version
What is your "fastboot getvar all" (don't post imei/sn)
Click to expand...
Click to collapse
Hi bro mine is 2.8.4.0 version TWRP.
and i dont quite undertand ur 2nd qn? How do i check that?
Jakob Zhang said:
Hi bro mine is 2.8.4.0 version TWRP.
and i dont quite undertand ur 2nd qn? How do i check that?
Click to expand...
Click to collapse
Do you have fastboot and adb installed on your computer (the android sdk) and the latest htc drivers?
alray said:
Do you have fastboot and adb installed on your computer (the android sdk) and the latest htc drivers?
Click to expand...
Click to collapse
Yes i do i got the fastboot and adb files in my laptop. For the drivers i think yes but not sure. But when i connect my phone to laptop it shows that it is able to detect the internal storage.
Jakob Zhang said:
Yes i do i got the fastboot and adb files in my laptop. For the drivers i think yes but not sure. But when i connect my phone to laptop it shows that it is able to detect the internal storage.
Click to expand...
Click to collapse
Ok so do you know how to use fastboot/adb commands? If yes then post the output of "fastboot getvar all" (except your imei and sn).
If no read post #6 of this thread: http://forum.xda-developers.com/htc-one/help/help-to-phone-t3254025
alray said:
Ok so do you know how to use fastboot/adb commands? If yes then post the output of "fastboot getvar all" (except your imei and sn).
If no read post #6 of this thread: http://forum.xda-developers.com/htc-one/help/help-to-phone-t3254025
Click to expand...
Click to collapse
hi bro i am using win10 and i install the HTC driver from your link, and when using fastboot command it still says that waiting for device
Jakob Zhang said:
hi bro i am using win10 and i install the HTC driver from your link, and when using fastboot command it still says that waiting for device
Click to expand...
Click to collapse
Either the drivers are not installed correctly or its a connectivity issue (bad USB cable, bad USB port (phone or computer).
What is your hboot version?
Try a different cable already known to work for data connection
Try another usb port (usb 2.0 only)
Try another computer
alray said:
Either the drivers are not installed correctly or its a connectivity issue (bad USB cable, bad USB port (phone or computer).
What is your hboot version?
Try a different cable already known to work for data connection
Try another usb port (usb 2.0 only)
Try another computer
Click to expand...
Click to collapse
May i just use fastboot flash XXX.zip command to flash a new ROM so that i could fix the problem? I will try ur suggestion one by one. My hboot is ver1.54
Jakob Zhang said:
May i just use fastboot flash XXX.zip command to flash a new ROM so that i could fix the problem? I will try ur suggestion one by one. My hboot is ver1.54
Click to expand...
Click to collapse
You can't flash a rom using "fastboot flash xxx.zip" The only thing you can flash using fastboot is a RUU and that will requires fastboot connectivity and the output of "fastboot getvar all" so we can know what ruu you need.
Thx bro i am coming back
alray said:
You can't flash a rom using "fastboot flash xxx.zip" The only thing you can flash using fastboot is a RUU and that will requires fastboot connectivity and the output of "fastboot getvar all" so we can know what ruu you need.
Click to expand...
Click to collapse
''"
Hi bro sry for the late reply. I am busy for my exam these days. And thx for your kind help again! I use my roommate's laptop and it works! Here is my result for "fastboot getvar all":
C:\Users\user\Desktop\SDK>fastboot getvar all
< waiting for device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0714000
(bootloader) cidnum: HTC__044
(bootloader) battery-status: good
(bootloader) battery-voltage: 3998mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d16dc66985
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
May i know which RUU should i flash? thx bro
Jakob Zhang said:
''"
Hi bro sry for the late reply. I am busy for my exam these days. And thx for your kind help again! I use my roommate's laptop and it works! Here is my result for "fastboot getvar all":
C:\Users\user\Desktop\SDK>fastboot getvar all
< waiting for device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0714000
(bootloader) cidnum: HTC__044
(bootloader) battery-status: good
(bootloader) battery-voltage: 3998mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d16dc66985
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
May i know which RUU should i flash? thx bro
Click to expand...
Click to collapse
Would help to have S-OFF, There are 3 RUU that can be flashed on your phone, the first one 3.63.707.4 is an unsigned RUU and requires S-OFF, the second and third ones requires your firmware to be updated before they can be flashed on your phone...
You might want to flash this rom using twrp http://www.htc1guru.com/dld/guru_reset_m7_2-24-707-1-zip/. When installing, select yes to install stock recovery and stock radio, select no when asked to root. Then boot the phone in the OS and try updating it.
Ps. Please don't send me multiple PMs requesting "urgent" help. Just post here and I (or someone else) will eventually answer you as soon as possible.
alray said:
Would help to have S-OFF, There are 3 RUU that can be flashed on your phone, the first one 3.63.707.4 is an unsigned RUU and requires S-OFF, the second and third ones requires your firmware to be updated before they can be flashed on your phone...
You might want to flash this rom using twrp http://www.htc1guru.com/dld/guru_reset_m7_2-24-707-1-zip/. When installing, select yes to install stock recovery and stock radio, select no when asked to root. Then boot the phone in the OS and try updating it.
Ps. Please don't send me multiple PMs requesting "urgent" help. Just post here and I (or someone else) will eventually answer you as soon as possible.
Click to expand...
Click to collapse
I apologize for PM u twice bro! I download the ruu and one is in exe. format, i follow the step and it said that the phone and PC is not well connected. And the second RUU is in zip form and there are a lot of files inside like boot.img somehow. I get trouble in flashing the RUU and what is the most safe way of doing S-OFF?
Jakob Zhang said:
I apologize for PM u twice bro! I download the ruu and one is in exe. format, i follow the step and it said that the phone and PC is not well connected. And the second RUU is in zip form and there are a lot of files inside like boot.img somehow. I get trouble in flashing the RUU and what is the most safe way of doing S-OFF?
Click to expand...
Click to collapse
You should be able to S-OFF using Rumrunner which is free. The easiest way to S-OFF is Sunshine which cost 25$. Did you tried the rom linked above?
alray said:
You should be able to S-OFF using Rumrunner which is free. The easiest way to S-OFF is Sunshine which cost 25$. Did you tried the rom linked above?
Click to expand...
Click to collapse
Hi should I just use fastboot flash command to flash the rom? Since I cannot read or write on virtual sd card I dunno how to flash the rom u mentioned. Thx for ur kind and great help again
Jakob Zhang said:
Hi should I just use fastboot flash command to flash the rom? Since I cannot read or write on virtual sd card I dunno how to flash the rom u mentioned. Thx for ur kind and great help again
Click to expand...
Click to collapse
Use adb push or adb sideload to transfer the rom to your phone then flash it with twrp recovery.
alray said:
Use adb push or adb sideload to transfer the rom to your phone then flash it with twrp recovery.
Click to expand...
Click to collapse
Really really to my greatest gratitude! Now my phone back to the stock rom and functions normally! OMG thx bro Thx for your patient and amazing and detailed instructions!!!!!

Categories

Resources