Database Develop

[SOLVED] No imei and ROM install seems incomplete

Hi all,
First, i would like to apologize for my poor english.
Then, i have some problems with my HTC M7.
Yesterday, when i woke up, my phone was shut down. I thought that i had no battery anymore. (i had less than 10% when i went to bed so, it's possible).
Well, plug my phone in the charger, and wait... and, when he booted, i could not use my phone as usually: no PIN code, no ability to make phone call... After a few minutes, i saw that the IMEI zone was empty.
I was not worrying, and though that a simple cache cleearing could help me... Well, it was not...
Now, i'm not able to use my phone AT ALL.
He's rooted, S-OFF, and i tried to install 3 or 4 different roms but same problem.
The ROM install has some difficulties to be finished: in fact, on each rom i tried to install, i have now the same problem;
-> No IMEI
-> When i want to compose a phone number, the dialer does not appear
-> A message "com.htc.htcdialer isn't responding" appears every minute...
I tried to install another dialer, same problem...
I'm really lost.
hope that somebody could help me?
Regards,
Cyril
PS: For information, after the incident, my phone was not rooted anymore and was S-ON, i don't know if it was already the case before the incident...

UPDATE: Finally, i succeed to install a rom.
Everything works fine now, but still no imei present...

This is a firmware problem. It seems your firmware has corrupted.Best way is download a RUU for ur phone and just flash it.K ur s-on>can u get me a getvar all.
access ur bootloader select fastboot and then type " fastboot getvar all " without quotes.

Slim Shady said:
This is a firmware problem. It seems your firmware has corrupted.Best way is download a RUU for ur phone and just flash it.K ur s-on>can u get me a getvar all.
access ur bootloader select fastboot and then type " fastboot getvar all " without quotes.
Click to expand...
Click to collapse
Hi,
I've just started to work, but i will send you these informations as soon as possible.
Thanks a lot.

Slim Shady said:
This is a firmware problem. It seems your firmware has corrupted.Best way is download a RUU for ur phone and just flash it.K ur s-on>can u get me a getvar all.
access ur bootloader select fastboot and then type " fastboot getvar all " without quotes.
Click to expand...
Click to collapse
Re Slim Shady,
Here are the results:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: XXX
(bootloader) imei: XXX
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__203
(bootloader) battery-status: good
(bootloader) battery-voltage: 3828mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d16dc66985
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.070s
I'm not sure about what to do.
May i have to switch on s-on? Or relock the bootloader?
I don't really know how to install a new firmware...

an idea?

Leodagan said:
Re Slim Shady,
Here are the results:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__203
(bootloader) battery-status: good
(bootloader) battery-voltage: 3828mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d16dc66985
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.070s
I'm not sure about what to do.
May i have to switch on s-on? Or relock the bootloader?
I don't really know how to install a new firmware...
Click to expand...
Click to collapse
first please edit ur post and remove the imei and serial no from the post.Regarding ur problem download and flash this RUU http://www.htc1guru.com/dld/ruu_m7_...0-38r-1157-04l_release_353069_signed_2-1-exe/
Start the ruu and follow instructions like any windows application.If u have any questions feel free to ask .

Slim Shady said:
first please edit ur post and remove the imei and serial no from the post.Regarding ur problem download and flash this RUU http://www.htc1guru.com/dld/ruu_m7_...0-38r-1157-04l_release_353069_signed_2-1-exe/
Start the ruu and follow instructions like any windows application.If u have any questions feel free to ask .
Click to expand...
Click to collapse
just a quick note, he's s-off, personally I would go with a 1.xx ruu (except 1.20.xxx.x)

Slim Shady said:
first please edit ur post and remove the imei and serial no from the post.Regarding ur problem download and flash this RUU http://www.htc1guru.com/dld/ruu_m7_...0-38r-1157-04l_release_353069_signed_2-1-exe/
Start the ruu and follow instructions like any windows application.If u have any questions feel free to ask .
Click to expand...
Click to collapse
Done for IMEI and Serial NO, thx.
I've started to download it.
nkk71 said:
just a quick note, he's s-off, personally I would go with a 1.xx ruu (except 1.20.xxx.x)
Click to expand...
Click to collapse
Ok, so have i to switch on s-on?
Also, have i stay on unlocked mode?
Thanks guys, really.

Guys,
I tried to install the RUU but it failed:
Update from 3.62.1700.1 to 4.19.401.9, i click on next, then next, then a message (in french so i translate to you):
The update tool cannot update the android phone,
Please obtain the right update tool and try again.
Then, i can only click on ReadMe or Recovery, but nothing relevant after that.

Leodagan said:
Ok, so have i to switch on s-on?
Click to expand...
Click to collapse
Nooooo, do not go s-on!!

nkk71 said:
Nooooo, do not go s-on!!
Click to expand...
Click to collapse
Ok, i haven't done that, thanks ^^
So, now i'm stucked, i don't know what to do. Try another ruu?
I'm actually downloading RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13.3231.27_10.31.1131.05_release_310878_signed.exe, is it ok?

Well, it's not ok, with this rom too i can't update my phone...
Maybe should i have to find a 3.62 RUU in order to update?

Leodagan said:
Well, it's not ok, with this rom too i can't update my phone...
Maybe should i have to find a 3.62 RUU in order to update?
Click to expand...
Click to collapse
What do you mean, can't update... you mean the ruu isn't working?
if so, then get this one: ruu_m7ul_1.28.401.7.zip
AFH mirror: http://www.androidfilehost.com/?fid=23329332407584993
then (after making sure MD5 is correct), rename the file to ruu.zip, and:
In bootloader/FASTBOOT USB, flash it:
fastboot oem rebootRUU
fastboot flash zip ruu.zip
fastboot flash zip ruu.zip <- yes TWICE, the first one will report “failed flush again”, the second one will succeed.
fastboot reboot-bootloader
there is no need to relock bootloader or anything else with S-OFF (and stay S-OFF, don't even think about S-On!!)
if you want to see what kind of output to expect, check my guide http://forum.xda-developers.com/showthread.php?p=47794257&postcount=8 (post 8) which has a some visual feedback of what to expect. (disregard the guide, i'm just linking it for you to get an idea of what kind of output to expect)
Oh and you cannot do this on Win 8.1!!! http://forum.xda-developers.com/showpost.php?p=52135024&postcount=2 FAQ#1

nkk71 said:
What do you mean, can't update... you mean the ruu isn't working?
Click to expand...
Click to collapse
Yep, same message than the other ruu:
Update from 3.62.1700.1 to 1.2*******, i click on next, then next, then a message :
The update tool cannot update the android phone,
Please obtain the right update tool and try again.
I'll try your last post, i let you know when finished.

Leodagan said:
Yep, same message than the other ruu:
Update from 3.62.1700.1 to 1.2*******, i click on next, then next, then a message :
The update tool cannot update the android phone,
Please obtain the right update tool and try again.
I'll try your last post, i let you know when finished.
Click to expand...
Click to collapse
HELL YES IT WORKS!!!
Thank you thank you !!
(well for the moment i'm in 4.1.2, i will wait a moment before flashing a new recovery, a new rom and all the stuff :laugh::laugh::laugh

Leodagan said:
HELL YES IT WORKS!!!
Thank you thank you !!
(well for the moment i'm in 4.1.2, i will wait a moment before flashing a new recovery, a new rom and all the stuff :laugh::laugh::laugh
Click to expand...
Click to collapse
and IMEI, baseband etc are all working again?

Yep, all is functional again... thanks again !

Leodagan said:
Yep, all is functional again... thanks again !
Click to expand...
Click to collapse
:good: :good: my pleasure.
BTW, if you going for 4.4 ROMs, use TWRP: get TWRP from:
2.6.3.3: http://techerrata.com/browse/twrp2/m7
or 2.6.3.4: http://techerrata.com/browse/twrp2/m7ul
(make sure MD5 is correct, that site does not play nice with download managers)
2.7.0.4b: http://forum.xda-developers.com/showthread.php?t=2708134
in bootloader/FASTBOOT USB:
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
PS: for future reference about s-off vs s-on, check here http://forum.xda-developers.com/showpost.php?p=52135024&postcount=2 (under Not so FAQ #2)
if all is good now, can you also edit main thread title to include [SOLVED], thanks
edit the first post -> at the bottom of the edit window, click Go Advanced, and then you can edit main title

Done.
Thank you again, guys.

Stock OTA does not find updates // broken stock recovery

hey guys,
i just wanted to go back to stock with my HTC ONE. I flashed the Guru Reset M7 3.62.401.1.zip on my device but now it won't find any system updates. Also the recovery seems to be broken. Even after flashing the recovery seperatly the phone only shows a red triangle when i try to enter the stock recovery.
It also does not find any updates with the SuperCID.
Do you have any idea how to fix that?
I have the international Version of the HTC ONE.
Thanks in advance!

Fabivons said:
hey guys,
i just wanted to go back to stock with my HTC ONE. I flashed the Guru Reset M7 3.62.401.1.zip on my device but now it won't find any system updates. Also the recovery seems to be broken. Even after flashing the recovery seperatly the phone only shows a red triangle when i try to enter the stock recovery.
It also does not find any updates with the SuperCID.
Do you have any idea how to fix that?
I have the international Version of the HTC ONE.
Thanks in advance!
Click to expand...
Click to collapse
post your fastboot getvar all please without imei and serial number, be sure to remove these two items before posting, there have been a lot of users on here lately looking for replacement imei numbers etc, I just had a PM asking me for one, with that info they could clone your phone.
next, are you sure the 401 ruu is yours, that's why I want your fastboot getvar all.
are you s-off ?
the red triangle is stock recovery.
if you are s-off, change your CID back to HTC__001, super cid is not in the 401 ruu's or OTA's

Seanie280672 said:
post your fastboot getvar all please without imei and serial number, be sure to remove these two items before posting, there have been a lot of users on here lately looking for replacement imei numbers etc, I just had a PM asking me for one, with that info they could clone your phone.
next, are you sure the 401 ruu is yours, that's why I want your fastboot getvar all.
are you s-off ?
the red triangle is stock recovery.
if you are s-off, change your CID back to HTC__001, super cid is not in the 401 ruu's or OTA's
Click to expand...
Click to collapse
thanks for your quick reply!
here is my getvar:
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4T.27.3218.09
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: xxxxx
(bootloader) imei: xxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3741mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-e02a9046
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0

Fabivons said:
thanks for your quick reply!
here is my getvar:
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4T.27.3218.09
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: xxxxx
(bootloader) imei: xxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3741mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-e02a9046
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
Why not run this RUU it should put everything to stock since you are S-OFF?

majmoz said:
Why not run this RUU it should put everything to stock since you are S-OFF?
Click to expand...
Click to collapse
thanks fpr your help!
i tried to install the RUU but "fastboot.exe" crashes during the installation :/

Fabivons said:
thanks fpr your help!
i tried to install the RUU but "fastboot.exe" crashes during the installation :/
Click to expand...
Click to collapse
What exactly do you mean ? The RUU crashes in the middle of the installation ?

raghav kapur said:
What exactly do you mean ? The RUU crashes in the middle of the installation ?
Click to expand...
Click to collapse
This is waht happens

Fabivons said:
This is waht happens
Click to expand...
Click to collapse
the text says htc_fastboot.exe doesn't work anymore

Fabivons said:
the text says htc_fastboot.exe doesn't work anymore
Click to expand...
Click to collapse
Try uninstalling and reinstalling HTC Sync drivers. Or you can also try downloading the updated Android SDK and recreate the fastboot folder

raghav kapur said:
Try uninstalling and reinstalling HTC Sync drivers. Or you can also try downloading the updated Android SDK and recreate the fastboot folder
Click to expand...
Click to collapse
didn't change a thing :/
here is what i do:
0. deactivate anti- virus/firewall
1. start the RUU.exe
2. put my phone into fastboot mode
3. connect my phone via USB 2.0
4. start the flash progress
then after a few seconds htc_fastboot. exe crashes and the programm stops

Fabivons said:
didn't change a thing :/
here is what i do:
0. deactivate anti- virus/firewall
1. start the RUU.exe
2. put my phone into fastboot mode
3. connect my phone via USB 2.0
4. start the flash progress
then after a few seconds htc_fastboot. exe crashes and the programm stops
Click to expand...
Click to collapse
Which OS are you using ?

raghav kapur said:
Which OS are you using ?
Click to expand...
Click to collapse
windows 8.1 64bit

Fabivons said:
windows 8.1 64bit
Click to expand...
Click to collapse
Dont start the RUU first. First put the phone in fastboot mode, get the getvar to check if all's in order.
Once you getvar shows, it means the device is connected. After that, try the RUU
If still no luck, use RUU.zip

raghav kapur said:
Dont start the RUU first. First put the phone in fastboot mode, get the getvar to check if all's in order.
Once you getvar shows, it means the device is connected. After that, try the RUU
If still no luck, use RUU.zip
Click to expand...
Click to collapse
again no change... it always crashes within the first second
do you think it could work on ubuntu? i have a portable version! but my linux skill is -10.. do you think you could do that via temviever?

Fabivons said:
again no change... it always crashes within the first second
do you think it could work on ubuntu? i have a portable version! but my linux skill is -10.. do you think you could do that via temviever?
Click to expand...
Click to collapse
Im not sure that the portable version will work. Because even in Vmware, i couldnt get the adb drivers to work. Live CD would be a much better option IMO

raghav kapur said:
Im not sure that the portable version will work. Because even in Vmware, i couldnt get the adb drivers to work. Live CD would be a much better option IMO
Click to expand...
Click to collapse
sounds great! ...what is a Live CD and how does it work?

Fabivons said:
sounds great! ...what is a Live CD and how does it work?
Click to expand...
Click to collapse
A live CD is basically an OS running on a USB/CD. Instead of the portable version which runs within the Windows OS, you will boot directly from the USB containing Ubuntu. Nothing will happen to your existing Windows; once you're done with the RUU flashing process, just shut down the computer and unplug the USB
To get it running, download the Ubuntu image and click Download:
http://www.ubuntu.com/download/desktop/
Then, to prepare the bootable USB stick, this link:
unetbootin.net
Download that software. Choose the correct Ubuntu version and create the stick. Once you're done/ have doubts, let me know

raghav kapur said:
A live CD is basically an OS running on a USB/CD. Instead of the portable version which runs within the Windows OS, you will boot directly from the USB containing Ubuntu. Nothing will happen to your existing Windows; once you're done with the RUU flashing process, just shut down the computer and unplug the USB
To get it running, download the Ubuntu image and click Download:
http://www.ubuntu.com/download/desktop/
Then, to prepare the bootable USB stick, this link:
unetbootin.net
Download that software. Choose the correct Ubuntu version and create the stick. Once you're done/ have doubts, let me know
Click to expand...
Click to collapse
okay i'm as good as done.. what's next? ;p

Fabivons said:
okay i'm as good as done.. what's next? ;p
Click to expand...
Click to collapse
Cool. Now, you have to change the boot priority to the USB as first booting option. If you know how to do so, then proceed
If you don't, then there are two ways to depending on the pre-installed OS on your PC
Did your computer come with Windows 8/8.1 pre-installed or did it come with Win7 or older ?

raghav kapur said:
Cool. Now, you have to change the boot priority to the USB as first booting option. If you know how to do so, then proceed
If you don't, then there are two ways to depending on the pre-installed OS on your PC
Did your computer come with Windows 8/8.1 pre-installed or did it come with Win7 or older ?
Click to expand...
Click to collapse
i know how to change the priority
it's custom built
and i first installed windows 8.1 on it.

[Q] Bad Flash Or Soft Bricked??

Hey guys, i never really need anyones help but this is annoying me now. My problem is that i have converted my HTC One to the google edition firmware and all was going great. Earlier today i wanted to try the latest MIUI Rom so i downloaded it and flashed it. Everything went smoothly until it came to reboot (i totally wiped phone before i installed MIUI) and now it wont turn on or charge and show only signs of life in the form of fastboot which i can use getvar all to pull my system info. Some fields are blank which arent meant to be. I cannot flash anything as screen wont turn on or even vibrate. Kind of at a loss now and any help will be appreciated.
Noel

noel8211 said:
Hey guys, i never really need anyones help but this is annoying me now. My problem is that i have converted my HTC One to the google edition firmware and all was going great. Earlier today i wanted to try the latest MIUI Rom so i downloaded it and flashed it. Everything went smoothly until it came to reboot (i totally wiped phone before i installed MIUI) and now it wont turn on or charge and show only signs of life in the form of fastboot which i can use getvar all to pull my system info. Some fields are blank which arent meant to be. I cannot flash anything as screen wont turn on or even vibrate. Kind of at a loss now and any help will be appreciated.
Noel
Click to expand...
Click to collapse
not positive but the MIUI rom may require a special version custom recovery. did you check that you have the correct recovery before flashing ?

clsA said:
not positive but the MIUI rom may require a special version custom recovery. did you check that you have the correct recovery before flashing ?
Click to expand...
Click to collapse
hey thanks for replying. i used the latest 2.8.0.0 twrp recovery. my getvar all is:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: UNKNOWN
(bootloader) serialno:
(bootloader) imei: 355195000000010
(bootloader) meid: 00000000000000
(bootloader) product:
(bootloader) platform: HBOOT-8064
(bootloader) modelid: *********
(bootloader) cidnum:
(bootloader) battery-status: good
(bootloader) battery-voltage: 3662mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: UNKNOWN
(bootloader) commitno-bootloader: dirty-e02a9046
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.039s
C:\Program Files (x86)\Minimal ADB and Fastboot>
im not sure if thats all ok or not

noel8211 said:
hey thanks for replying. i used the latest 2.8.0.0 twrp recovery. my getvar all is:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: UNKNOWN
(bootloader) serialno:
(bootloader) imei: 355195000000010
(bootloader) meid: 00000000000000
(bootloader) product:
(bootloader) platform: HBOOT-8064
(bootloader) modelid: *********
(bootloader) cidnum:
(bootloader) battery-status: good
(bootloader) battery-voltage: 3662mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: UNKNOWN
(bootloader) commitno-bootloader: dirty-e02a9046
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.039s
C:\Program Files (x86)\Minimal ADB and Fastboot>
im not sure if thats all ok or not
Click to expand...
Click to collapse
Is that your real MID and CID?
You should correct those and RUU back to stock and start over. Your phone is having an identity crisis [emoji2]

clsA said:
Is that your real MID and CID?
You should correct those and RUU back to stock and start over. Your phone is having an identity crisis [emoji2]
Click to expand...
Click to collapse
lol yeah thats what it said after i flashed MIUI. what would be the best way to sort them out?

Theirs a MID change tool you use in Twrp
And changing the CID is a simple fastboot command

clsA said:
Theirs a MID change tool you use in Twrp
And changing the CID is a simple fastboot command
Click to expand...
Click to collapse
ah CID will be easy but MID wont as i cant even get to recovery or anything. not even bootloader. I didnt realise MIUI would screw up this bad, or could it be something to do with the 'latest' twrp being too new?

noel8211 said:
ah CID will be easy but MID wont as i cant even get to recovery or anything. not even bootloader. I didnt realise MIUI would screw up this bad, or could it be something to do with the 'latest' twrp being too new?
Click to expand...
Click to collapse
Flash TWRP 2.6.3.3 it's the most reliable version

clsA said:
Flash TWRP 2.6.3.3 it's the most reliable version
Click to expand...
Click to collapse
i have been trying that for a while now but keep getting remote: not allowed errors

Is your bootloader relocked?

clsA said:
Is your bootloader relocked?
Click to expand...
Click to collapse
i didnt relock it after i flashed. can it relock itself?

noel8211 said:
i didnt relock it after i flashed. can it relock itself?
Click to expand...
Click to collapse
No and don't relock it. Their are people stuck and can't unlock coming from GPE

clsA said:
No and don't relock it. Their are people stuck and can't unlock coming from GPE
Click to expand...
Click to collapse
ah thats good then. i never bothered to re-lock it when i flashed the firmware as didnt see the point. all the guides i can find are to change things through adb which doesnt work as comupet dont pick it up. when however i do a fastboot devices, my device instaed of numbers , is ???????????????. im sure thats not normal.
by the way, thanks for helping me

noel8211 said:
ah thats good then. i never bothered to re-lock it when i flashed the firmware as didnt see the point. all the guides i can find are to change things through adb which doesnt work as comupet dont pick it up. when however i do a fastboot devices, my device instaed of numbers , is ???????????????. im sure thats not normal.
by the way, thanks for helping me
Click to expand...
Click to collapse
Well adb is only going to work in recovery so ignore that
So you flashed firmware ? Which one?
Did you try and get in stock recovery and do a factory reset

clsA said:
Well adb is only going to work in recovery so ignore that
So you flashed firmware ? Which one?
Did you try and get in stock recovery and do a factory reset
Click to expand...
Click to collapse
I flashed the latest MIUI from MIUIandroid and then just rebooted afterwards. the phone seems dead but i can get fastboot to partially work as my computer recognises it

noel8211 said:
I flashed the latest MIUI from MIUIandroid and then just rebooted afterwards. the phone seems dead but i can get fastboot to partially work as my computer recognises it
Click to expand...
Click to collapse
I'm going to need my PC to get you the links you need to try and get back up and running. I'll be back home in an hour or so

clsA said:
I'm going to need my PC to get you the links you need to try and get back up and running. I'll be back home in an hour or so
Click to expand...
Click to collapse
Thank you very much, i really appreciate it

noel8211 said:
Thank you very much, i really appreciate it
Click to expand...
Click to collapse
Ok I'm back
First lets try and get a working recovery on your phone
download and flash this >> twrp-recovery-2.7-m7-nobcb.img
fastboot flash recovery twrp-recovery-2.7-m7-nobcb.img
fastboot erase cache
fastboot reboot-bootloader
Now enter recovery
We are following nkk71 guide here if you want to jump ahead
http://forum.xda-developers.com/showthread.php?t=2739126
also could you give me the name of the MIUI you downloaded

clsA said:
Ok I'm back
First lets try and get a working recovery on your phone
also could you give me the name of the MIUI you downloaded
Click to expand...
Click to collapse
i think he has a lot more to fix than just the misc partition, not sure if this is fixable, i believe the updater-script wrote to hboot partition, and he's unlikely to even be able to "fastboot oem rebootRUU" to fix that,
if by some chance he's able to get to recovery, then he'd have to manually dd all the messed up partitions.
OP, can you upload the updater-script (it's in <nameofrom>zip /META-INF/com/google/android) to pastebin (or zip it and attach it here).

nkk71 said:
i think he has a lot more to fix than just the misc partition, not sure if this is fixable, i believe the updater-script wrote to hboot partition, and he's unlikely to even be able to "fastboot oem rebootRUU" to fix that,
if by some chance he's able to get to recovery, then he'd have to manually dd all the messed up partitions.
OP, can you upload the updater-script (it's in <nameofrom>zip /META-INF/com/google/android) to pastebin (or zip it and attach it here).
Click to expand...
Click to collapse
yeah this could get complicated, I don't know the actual MIUI he used and he mentioned flashing a firmware, I hope he just meant flash a rom.

No OS, S-ON need desperate help

I need really bad help with my phone, it's s-on i cant install any roms and i cant restore from a backup anymore, i have twrp installed as of now, I have tried every method for getting s - off in the past but that was with a custom crappy rom so it didnt work.
Att htc one m7 32gb please add me on skype, i need direct help and i cannot just waiting on somebody to reply to this thread, please i seek desperate help my skype name is rtorr724, please i need someone that knows a lot about android and could help me fix this problem.
i can give you any other info you may need on skype to help me fix my problem. thanks.

rtorr724 said:
I need really bad help with my phone, it's s-on i cant install any roms and i cant restore from a backup anymore, i have twrp installed as of now, I have tried every method for getting s - off in the past but that was with a custom crappy rom so it didnt work.
Att htc one m7 32gb please add me on skype, i need direct help and i cannot just waiting on somebody to reply to this thread, please i seek desperate help my skype name is rtorr724, please i need someone that knows a lot about android and could help me fix this problem.
i can give you any other info you may need on skype to help me fix my problem. thanks.
Click to expand...
Click to collapse
Reboot into fastboot mode.
Hold Power + Volume Down until, select Fastboot.
Run this command:
Code:
fastboot getvar all
We can then get the CID/Model and Fastboot version so you can use an RUU to recover the device.

DennisBold said:
Reboot into fastboot mode.
Hold Power + Volume Down until, select Fastboot.
Run this command:
Code:
fastboot getvar all
We can then get the CID/Model and Fastboot version so you can use an RUU to recover the device.
Click to expand...
Click to collapse
I did not know what to look for so i just copy nd pasted all of it
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4T.24.3218.09
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: 000000000
(bootloader) imei: 0000000000
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3959mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-c6bbb6d4
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0

rtorr724 said:
I did not know what to look for so i just copy nd pasted all of it
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4T.24.3218.09
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3959mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-c6bbb6d4
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
you can use that RUU to restore your phone: http://www.htc1guru.com/2014/03/att-ruu/
with s-on you must have a locked or re-locked bootloader use it.
and btw, remove imei and serialno from your above post.

alray said:
you can use that RUU to restore your phone:
with s-on you must have a locked or re-locked bootloader use it.
and btw, remove imei and serialno from your above post.
Click to expand...
Click to collapse
I install it through sideload correct?
also what could someone do with my imei and serialno?

rtorr724 said:
I install it through sideload correct?
Click to expand...
Click to collapse
No its an .exe file. You must launch that executable using a windows pc with the phone connected to it and booted in bootloader mode.
also what could someone do with my imei and serialno?
Click to expand...
Click to collapse
Someone could use it to clone your phone.

alray said:
No its an .exe file. You must launch that executable using a windows pc with the phone connected to it and booted in bootloader mode.
Someone could use it to clone your phone.
Click to expand...
Click to collapse
Well thank you for telling me about it I wouldn't have wanted that to happen.
The download is pretty slow so when its done ill post back here with my results

rtorr724 said:
Well thank you for telling me about it I wouldn't have wanted that to happen.
The download is pretty slow so when its done ill post back here with my results
Click to expand...
Click to collapse
ok, also make sure to check that the MD5 value of your downloaded file will match the value given on the website.
should be: 5f121d72b8fa3f6f1704588467752605
you can use winMd5 program to check the value.

alray said:
ok, also make sure to check that the MD5 value of your downloaded file will match the value given on the website.
Click to expand...
Click to collapse
The program failed to work and got error 155, the md5 value matched and my phone just went to a black htc screen.
Like i said before if someone could add me on skype so it would be easier to help that would be great
rtorr724 <- skype

rtorr724 said:
The program failed to work and got error 155, the md5 value matched and my phone just went to a black htc screen.
Like i said before if someone could add me on skype so it would be easier to help that would be great
rtorr724 <- skype
Click to expand...
Click to collapse
is your bootloader locked or unlocked?

alray said:
is your bootloader locked or unlocked?
Click to expand...
Click to collapse
unlocked

rtorr724 said:
unlocked
Click to expand...
Click to collapse
so go back and read post #4 again...

alray said:
so go back and read post #4 again...
Click to expand...
Click to collapse
._. im really stupid xD
so what do i do now?

rtorr724 said:
._. im really stupid xD
so what do i do now?
Click to expand...
Click to collapse
relock the bootloader and run the ruu....
to lock the bootloader:
Code:
fastboot oem lock

alray said:
relock the bootloader and run the ruu....
to lock the bootloader:
Code:
fastboot oem lock
Click to expand...
Click to collapse
Thanks so much! but how do i get unlocked again?

rtorr724 said:
Thanks so much! but how do i get unlocked again?
Click to expand...
Click to collapse
you can unlock again the same way you did the first time, using the unlock_code.bin you have received from htcdev.com. if the unlock code you already have doesnt work anymore, request a new unlock code by submitting you identifier token again.

alray said:
you can unlock again the same way you did the first time, using the unlock_code.bin you have received from htcdev.com. if the unlock code you already have doesnt work anymore, request a new unlock code by submitting you identifier token again.
Click to expand...
Click to collapse
I have one last problem, i got s-off and everything and now im trying to get cm12 5.0 and everytime i try to install it, it returns with the error
E:Error in /data/media/0/cm.zip
(Status 0)
Installation aborted.
And above that it says a bunch of stuff of failed to mount /dev/block/platform/msm_sdcc.1/by-name/system at /system:no such file or directory
and then it says the same thing for the unmount

rtorr724 said:
I have one last problem, i got s-off and everything and now im trying to get cm12 5.0 and everytime i try to install it, it returns with the error
E:Error in /data/media/0/cm.zip
(Status 0)
Installation aborted.
And above that it says a bunch of stuff of failed to mount /dev/block/platform/msm_sdcc.1/by-name/system at /system:no such file or directory
and then it says the same thing for the unmount
Click to expand...
Click to collapse
Which recovery are you using?

DennisBold said:
Which recovery are you using?
Click to expand...
Click to collapse
TWRP and CWM i get an error for both, i think its because when I wipe data/factory reset it gets rid of systtem

rtorr724 said:
TWRP and CWM i get an error for both, i think its because when I wipe data/factory reset it gets rid of systtem
Click to expand...
Click to collapse
I was more or less asking for your preference.
Your phone has partitions of memory which hold data, and when you update or install a custom ROM, the recovery utility mounts the partitions so they can be accessed to write and read data. Android does this every-time you turn on your phone. Formatting a partition doesn't delete it, it simply removes everything. CyanogenMod incorporated "block by name" mounting. Which basically makes it easier to mount partitions without being device specific.
Try this version of TWRP: http://techerrata.com/file/twrp2/m7/openrecovery-twrp-2.7.1.1-m7.img
Anything above 2.7.1.1 should work, anything below will not.
For ClockWorkMod anything above 6.0.4.8 will work.

System UI and Virtual SD card Issue

Guys its urgent. I am using TWRP recovery and wipe the whole phone including internal memory only left system not being wiped yet. Then when i boot to the system i cannot see the status bar! and just a popup window saying that system ui stopped.. and most importantly i cannot use virtual SD card. Cuz now i wanna re-flash the ROM so that i can fix it. But now i cannot even write or read the internal memory meaning that i cannot even download the ROM again and flash it! anyone can help? TAT

Jakob Zhang said:
Guys its urgent. I am using TWRP recovery and wipe the whole phone including internal memory only left system not being wiped yet. Then when i boot to the system i cannot see the status bar! and just a popup window saying that system ui stopped.. and most importantly i cannot use virtual SD card. Cuz now i wanna re-flash the ROM so that i can fix it. But now i cannot even write or read the internal memory meaning that i cannot even download the ROM again and flash it! anyone can help? TAT
Click to expand...
Click to collapse
What is your twrp version
What is your "fastboot getvar all" (don't post imei/sn)

alray said:
What is your twrp version
What is your "fastboot getvar all" (don't post imei/sn)
Click to expand...
Click to collapse
Hi bro mine is 2.8.4.0 version TWRP.
and i dont quite undertand ur 2nd qn? How do i check that?

Jakob Zhang said:
Hi bro mine is 2.8.4.0 version TWRP.
and i dont quite undertand ur 2nd qn? How do i check that?
Click to expand...
Click to collapse
Do you have fastboot and adb installed on your computer (the android sdk) and the latest htc drivers?

alray said:
Do you have fastboot and adb installed on your computer (the android sdk) and the latest htc drivers?
Click to expand...
Click to collapse
Yes i do i got the fastboot and adb files in my laptop. For the drivers i think yes but not sure. But when i connect my phone to laptop it shows that it is able to detect the internal storage.

Jakob Zhang said:
Yes i do i got the fastboot and adb files in my laptop. For the drivers i think yes but not sure. But when i connect my phone to laptop it shows that it is able to detect the internal storage.
Click to expand...
Click to collapse
Ok so do you know how to use fastboot/adb commands? If yes then post the output of "fastboot getvar all" (except your imei and sn).
If no read post #6 of this thread: http://forum.xda-developers.com/htc-one/help/help-to-phone-t3254025

alray said:
Ok so do you know how to use fastboot/adb commands? If yes then post the output of "fastboot getvar all" (except your imei and sn).
If no read post #6 of this thread: http://forum.xda-developers.com/htc-one/help/help-to-phone-t3254025
Click to expand...
Click to collapse
hi bro i am using win10 and i install the HTC driver from your link, and when using fastboot command it still says that waiting for device

Jakob Zhang said:
hi bro i am using win10 and i install the HTC driver from your link, and when using fastboot command it still says that waiting for device
Click to expand...
Click to collapse
Either the drivers are not installed correctly or its a connectivity issue (bad USB cable, bad USB port (phone or computer).
What is your hboot version?
Try a different cable already known to work for data connection
Try another usb port (usb 2.0 only)
Try another computer

alray said:
Either the drivers are not installed correctly or its a connectivity issue (bad USB cable, bad USB port (phone or computer).
What is your hboot version?
Try a different cable already known to work for data connection
Try another usb port (usb 2.0 only)
Try another computer
Click to expand...
Click to collapse
May i just use fastboot flash XXX.zip command to flash a new ROM so that i could fix the problem? I will try ur suggestion one by one. My hboot is ver1.54

Jakob Zhang said:
May i just use fastboot flash XXX.zip command to flash a new ROM so that i could fix the problem? I will try ur suggestion one by one. My hboot is ver1.54
Click to expand...
Click to collapse
You can't flash a rom using "fastboot flash xxx.zip" The only thing you can flash using fastboot is a RUU and that will requires fastboot connectivity and the output of "fastboot getvar all" so we can know what ruu you need.

Thx bro i am coming back
alray said:
You can't flash a rom using "fastboot flash xxx.zip" The only thing you can flash using fastboot is a RUU and that will requires fastboot connectivity and the output of "fastboot getvar all" so we can know what ruu you need.
Click to expand...
Click to collapse
''"
Hi bro sry for the late reply. I am busy for my exam these days. And thx for your kind help again! I use my roommate's laptop and it works! Here is my result for "fastboot getvar all":
C:\Users\user\Desktop\SDK>fastboot getvar all
< waiting for device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0714000
(bootloader) cidnum: HTC__044
(bootloader) battery-status: good
(bootloader) battery-voltage: 3998mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d16dc66985
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
May i know which RUU should i flash? thx bro

Jakob Zhang said:
''"
Hi bro sry for the late reply. I am busy for my exam these days. And thx for your kind help again! I use my roommate's laptop and it works! Here is my result for "fastboot getvar all":
C:\Users\user\Desktop\SDK>fastboot getvar all
< waiting for device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0714000
(bootloader) cidnum: HTC__044
(bootloader) battery-status: good
(bootloader) battery-voltage: 3998mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d16dc66985
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
May i know which RUU should i flash? thx bro
Click to expand...
Click to collapse
Would help to have S-OFF, There are 3 RUU that can be flashed on your phone, the first one 3.63.707.4 is an unsigned RUU and requires S-OFF, the second and third ones requires your firmware to be updated before they can be flashed on your phone...
You might want to flash this rom using twrp http://www.htc1guru.com/dld/guru_reset_m7_2-24-707-1-zip/. When installing, select yes to install stock recovery and stock radio, select no when asked to root. Then boot the phone in the OS and try updating it.
Ps. Please don't send me multiple PMs requesting "urgent" help. Just post here and I (or someone else) will eventually answer you as soon as possible.

alray said:
Would help to have S-OFF, There are 3 RUU that can be flashed on your phone, the first one 3.63.707.4 is an unsigned RUU and requires S-OFF, the second and third ones requires your firmware to be updated before they can be flashed on your phone...
You might want to flash this rom using twrp http://www.htc1guru.com/dld/guru_reset_m7_2-24-707-1-zip/. When installing, select yes to install stock recovery and stock radio, select no when asked to root. Then boot the phone in the OS and try updating it.
Ps. Please don't send me multiple PMs requesting "urgent" help. Just post here and I (or someone else) will eventually answer you as soon as possible.
Click to expand...
Click to collapse
I apologize for PM u twice bro! I download the ruu and one is in exe. format, i follow the step and it said that the phone and PC is not well connected. And the second RUU is in zip form and there are a lot of files inside like boot.img somehow. I get trouble in flashing the RUU and what is the most safe way of doing S-OFF?

Jakob Zhang said:
I apologize for PM u twice bro! I download the ruu and one is in exe. format, i follow the step and it said that the phone and PC is not well connected. And the second RUU is in zip form and there are a lot of files inside like boot.img somehow. I get trouble in flashing the RUU and what is the most safe way of doing S-OFF?
Click to expand...
Click to collapse
You should be able to S-OFF using Rumrunner which is free. The easiest way to S-OFF is Sunshine which cost 25$. Did you tried the rom linked above?

alray said:
You should be able to S-OFF using Rumrunner which is free. The easiest way to S-OFF is Sunshine which cost 25$. Did you tried the rom linked above?
Click to expand...
Click to collapse
Hi should I just use fastboot flash command to flash the rom? Since I cannot read or write on virtual sd card I dunno how to flash the rom u mentioned. Thx for ur kind and great help again

Jakob Zhang said:
Hi should I just use fastboot flash command to flash the rom? Since I cannot read or write on virtual sd card I dunno how to flash the rom u mentioned. Thx for ur kind and great help again
Click to expand...
Click to collapse
Use adb push or adb sideload to transfer the rom to your phone then flash it with twrp recovery.

alray said:
Use adb push or adb sideload to transfer the rom to your phone then flash it with twrp recovery.
Click to expand...
Click to collapse
Really really to my greatest gratitude! Now my phone back to the stock rom and functions normally! OMG thx bro Thx for your patient and amazing and detailed instructions!!!!!