Database Develop

[Q] Please help me with my Note GT-N7000 (I might have bricked it)

My Galaxy Note GT-N7000 was on CM10 last night and I followed Zedomax's rootgalaxynote.com GT-N7000 unrooting method and when I was installing the Mobile Odin Lite on my phone, it said it needs to download more add-on to be able to flash it, then all the sudden my internet connection was down, so I couldn't download it, but followed his instruction and tried wipe and factory reset, but it got stuck at formatting (no progress), then I flashed cm9 again, but it was stuck at cm9 boot logo, nothing else. Then I followed Zedomax's rootgalaxynote.com's first method using my Computer Desktop but
"<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000DXKL1_N7000OLBKJ6_N7000DXKJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> factoryfs.img
" it got stuck at here, no progress. The only thing I can do with my phone is that to either put on download mode or it says "Firmware upgrade encountered an isssue. Please select recovery mode in Kies & try again." Please help me with this friends. I am looking forward to your help. Thank you.
Khai.

you give not detail as needed. but nevermine, from the last part it seems you has bricked your phone.
i think you might need to refer "hg42" thread to revive your note.
Sad to be hear that.
Sent from my GT-N7000 using xda premium

immediately contact dr.ketan
khaino said:
My Galaxy Note GT-N7000 was on CM10 last night and I followed Zedomax's rootgalaxynote.com GT-N7000 unrooting method and when I was installing the Mobile Odin Lite on my phone, it said it needs to download more add-on to be able to flash it, then all the sudden my internet connection was down, so I couldn't download it, but followed his instruction and tried wipe and factory reset, but it got stuck at formatting (no progress), then I flashed cm9 again, but it was stuck at cm9 boot logo, nothing else. Then I followed Zedomax's rootgalaxynote.com's first method using my Computer Desktop but
"<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000DXKL1_N7000OLBKJ6_N7000DXKJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> factoryfs.img
" it got stuck at here, no progress. The only thing I can do with my phone is that to either put on download mode or it says "Firmware upgrade encountered an isssue. Please select recovery mode in Kies & try again." Please help me with this friends. I am looking forward to your help. Thank you.
Khai.
Click to expand...
Click to collapse
Contact dr.ketan for yr solution. He is the sweet n right person to guide u.

khaino said:
My Galaxy Note GT-N7000 was on CM10 last night and I followed Zedomax's rootgalaxynote.com GT-N7000 unrooting method and when I was installing the Mobile Odin Lite on my phone, it said it needs to download more add-on to be able to flash it, then all the sudden my internet connection was down, so I couldn't download it, but followed his instruction and tried wipe and factory reset, but it got stuck at formatting (no progress), then I flashed cm9 again, but it was stuck at cm9 boot logo, nothing else. Then I followed Zedomax's rootgalaxynote.com's first method using my Computer Desktop but
"<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000DXKL1_N7000OLBKJ6_N7000DXKJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> factoryfs.img
" it got stuck at here, no progress. The only thing I can do with my phone is that to either put on download mode or it says "Firmware upgrade encountered an isssue. Please select recovery mode in Kies & try again." Please help me with this friends. I am looking forward to your help. Thank you.
Khai.
Click to expand...
Click to collapse
the ever GOLDEN RULE: Don't ever ever attempt to WIPE data if your on a unsafe or on a stock ICS kernel. That's should be at the top of your list before you do anything on your phone. If you need to WIPE, make sure your already in a safe kernel or if you haven't still, then flash one.
Now going back on your perennial issue. The only thing you can and will do is FLASH a stock GB on download mode using PC ODIN. Yes Doc Ketan's thread/s have those old GB's ROM.. -> http://forum.xda-developers.com/showthread.php?t=1424997, follow it to a tee.
One added thing when your going to start to flash GB again... Pray, that it would not stuck back again at 'factoryfs.img'
Good luck bud!

No luck...yet.
letters_to_cleo said:
the ever GOLDEN RULE: Don't ever ever attempt to WIPE data if your on a unsafe or on a stock ICS kernel. That's should be at the top of your list before you do anything on your phone. If you need to WIPE, make sure your already in a safe kernel or if you haven't still, then flash one.
Now going back on your perennial issue. The only thing you can and will do is FLASH a stock GB on download mode using PC ODIN. Yes Doc Ketan's thread/s have those old GB's ROM.. -> http://forum.xda-developers.com/showthread.php?t=1424997, follow it to a tee.
One added thing when your going to start to flash GB again... Pray, that it would not stuck back again at 'factoryfs.img'
Good luck bud!
Click to expand...
Click to collapse
I spent two days straight working on it, but no luck. I think I am gonna contact Samsung and send it to them for the warranty and I don't know if they would know that I rooted it. But I am just gonna give a try. Please share your knowledge and thoughts. Thank you.

Reflash it with PC odin (Again? )... refer to Dr Ketan... I encounter same issues before, I just try try to reflash old GB... link at #4

khaino said:
I spent two days straight working on it, but no luck. I think I am gonna contact Samsung and send it to them for the warranty and I don't know if they would know that I rooted it. But I am just gonna give a try. Please share your knowledge and thoughts. Thank you.
Click to expand...
Click to collapse
Can you get the Note into Download mode?
If so, try using desktop Odin (latest desktop version not mobile version) and flash the Abyss 4.2 kernel. the Tar file is easily found on XDA. This is a GB kernel and should allow you to get into full Recovery. From there you can flash a new ROM as you are now on a safe kernel.

Tried that, but not sure about the latest desktop version.
Alba Donzo said:
Can you get the Note into Download mode?
If so, try using desktop Odin (latest desktop version not mobile version) and flash the Abyss 4.2 kernel. the Tar file is easily found on XDA. This is a GB kernel and should allow you to get into full Recovery. From there you can flash a new ROM as you are now on a safe kernel.
Click to expand...
Click to collapse
Hi, thank you for your message, I was on Abyskernel when I factory data reset, and tried to flash back to cm9 from cm10, but no luck. Then I used Odin3-v1.85 on desktop with Gingerbread Rom, it got stuck at factoryfs.img.. I have tried with different pc disabling firewall and anti virus. What is the latest desktop version of Odin that you know? What specific tar file do you know that is the best? Thank you again.

khaino said:
Hi, thank you for your message, I was on Abyskernel when I factory data reset, and tried to flash back to cm9 from cm10, but no luck. Then I used Odin3-v1.85 on desktop with Gingerbread Rom, it got stuck at factoryfs.img.. I have tried with different pc disabling firewall and anti virus. What is the latest desktop version of Odin that you know? What specific tar file do you know that is the best? Thank you again.
Click to expand...
Click to collapse
Latest Odin is 3.0.4
Sent from my GT-N7000 using xda app-developers app

khaino said:
Hi, thank you for your message, I was on Abyskernel when I factory data reset, and tried to flash back to cm9 from cm10, but no luck. Then I used Odin3-v1.85 on desktop with Gingerbread Rom, it got stuck at factoryfs.img.. I have tried with different pc disabling firewall and anti virus. What is the latest desktop version of Odin that you know? What specific tar file do you know that is the best? Thank you again.
Click to expand...
Click to collapse
your CM10 to CM9 downgrade sounds like a bad flash, it can happen. I would try Odin3 V3.05 with Abyss (search for "AbyssNotekernel42CWTouchOriginalLogo.tar" or go here - https://www.dropbox.com/s/yoe791qq3atbung/AbyssNotekernel42CWTouchOriginalLogo.tar).
this should allow you to install a safe kernel to flash from. if you can now access Recovery, then you can flash a ROM from there. I would use a Stock based one (I always recommend Chrack ROM or Criskelo), If you prefer, you can download a Stock tar file and use Odin but I would try downloading the latest Chrack ROM or Criskelo ROM, transferring it to your micro SD and flashing after you have installed the Abyss tar.
I hope this helps. Please hit Thanks if it did.

Question!
Alba Donzo said:
your CM10 to CM9 downgrade sounds like a bad flash, it can happen. I would try Odin3 V3.05 with Abyss (search for "AbyssNotekernel42CWTouchOriginalLogo.tar"
this should allow you to install a safe kernel to flash from. if you can now access Recovery, then you can flash a ROM from there. I would use a Stock based one (I always recommend Chrack ROM or Criskelo), If you prefer, you can download a Stock tar file and use Odin but I would try downloading the latest Chrack ROM or Criskelo ROM, transferring it to your micro SD and flashing after you have installed the Abyss tar.
I hope this helps. Please hit Thanks if it did.
Click to expand...
Click to collapse
You gave me the AbyssNotekernel, but the only thing my phone can now do when I turn on is either show a screen with "Firmware upgrade encounters an issue. Please select recovery mode in Kies and try again" or on download mode. Or is there any way I can use the Desktop Odin and try to install the AbyssNotekernel that you gave me? I really don't know bro. Thank you for the message, please let me know.

khaino said:
You gave me the AbyssNotekernel, but the only thing my phone can now do when I turn on is either show a screen with "Firmware upgrade encounters an issue. Please select recovery mode in Kies and try again" or on download mode. Or is there any way I can use the Desktop Odin and try to install the AbyssNotekernel that you gave me? I really don't know bro. Thank you for the message, please let me know.
Click to expand...
Click to collapse
Yes, the Abyss tar file is for use with Odin. install Odin on your PC, put the Note into Download and connect. Flash the tar file and wait for the Note to reboot (search for notes on how to flash with Odin if you're not 100% sure). you should now be able to use Recovery to flash a ROM from this safe kernel.

Just a quick question.
Alba Donzo said:
Yes, the Abyss tar file is for use with Odin. install Odin on your PC, put the Note into Download and connect. Flash the tar file and wait for the Note to reboot (search for notes on how to flash with Odin if you're not 100% sure). you should now be able to use Recovery to flash a ROM from this safe kernel.
Click to expand...
Click to collapse
Sorry I didn't explain in details, I am on pc Odin version 3.07 and clicked on PDA but the Abyss tar file is not appearing there even after unzipping it a couple of times on the desktop. Please let me know bro. Thank you for your response.
Khai.

khaino said:
Sorry I didn't explain in details, I am on pc Odin version 3.07 and clicked on PDA but the Abyss tar file is not appearing there even after unzipping it a couple of times on the desktop. Please let me know bro. Thank you for your response.
Khai.
Click to expand...
Click to collapse
.tar file is to be flashed with odin directly. It has an image inside and should not extract it. Should put the .tar file in one folder but not on desktop screen. Select pda box in odin and brow to the folder where you put .tar file. Should see it there.
BTW, if flash using CWM failed again, then should use hg42 scanner to check if there is partition damage.
http://forum.xda-developers.com/showthread.php?t=1823918

Update.
forest1971 said:
.tar file is to be flashed with odin directly. It has an image inside and should not extract it. Should put the .tar file in one folder but not on desktop screen. Select pda box in odin and brow to the folder where you put .tar file. Should see it there.
BTW, if flash using CWM failed again, then should use hg42 scanner to check if there is partition damage.
http://forum.xda-developers.com/showthread.php?t=1823918
Click to expand...
Click to collapse
Thanks for your patience on your instruction, I actually was able to flash the Abysskernel that you gave me with ODIN and it went straight to the recovery mode, but then I can't install anything, then I put it back to download mode and tried to flash a Gingerbread ROM, but as always it got stucked at factoryfs.img. What do you think I can do bro? Please let me know about it. Thank you.
Khai.

khaino said:
Thanks for your patience on your instruction, I actually was able to flash the Abysskernel that you gave me with ODIN and it went straight to the recovery mode, but then I can't install anything, then I put it back to download mode and tried to flash a Gingerbread ROM, but as always it got stucked at factoryfs.img. What do you think I can do bro? Please let me know about it. Thank you.
Khai.
Click to expand...
Click to collapse
It seem to show you have an emmc brick, although using the partition scanner will confirm. The options are to send to ss service for warranty or to revise using repartition. For warranty you will need to reset flash counter using a jig.
Sent from my phone

Update and question.
forest1971 said:
It seem to show you have an emmc brick, although using the partition scanner will confirm. The options are to send to ss service for warranty or to revise using repartition. For warranty you will need to reset flash counter using a jig.
Sent from my phone
Click to expand...
Click to collapse
Hi bro,
I flashed the Abysskernel again and it went to Samsung Galaxy Note GT-N7000 logo with big Triangle at the bottom and it then goes to Android system recovery <3e>, then it looks like there is no option for me to access the SD card, but its own 16GB storage it came with and that one has CM10 in it. Tried to flash that, but it says "E:failed to verify whole-file signature". If I attempt to claim for warranty will Samsung know that I rooted it after clearing the binary counts? Please let me know. Thank you for your instructions. If there is anything else you want me to try out, please let me know. Thank you.
Khai.

khaino said:
Hi bro,
I flashed the Abysskernel again and it went to Samsung Galaxy Note GT-N7000 logo with big Triangle at the bottom and it then goes to Android system recovery <3e>, then it looks like there is no option for me to access the SD card, but its own 16GB storage it came with and that one has CM10 in it. Tried to flash that, but it says "E:failed to verify whole-file signature". If I attempt to claim for warranty will Samsung know that I rooted it after clearing the binary counts? Please let me know. Thank you for your instructions. If there is anything else you want me to try out, please let me know. Thank you.
Khai.
Click to expand...
Click to collapse
Once reset flash counter the triangle will go and you can flash a stock kernel find link from dr.ketan toolbox, then it is ok to send to warranty.
Sent from my phone

Update.
forest1971 said:
Once reset flash counter the triangle will go and you can flash a stock kernel find link from dr.ketan toolbox, then it is ok to send to warranty.
Sent from my phone
Click to expand...
Click to collapse
Hi bro, it somehow managed to get on CWM and but any flashing was aborted. And tried to flash Criskelo, but got stuck at installing, no progress. What should I do? Thank you.

Just two options above, warranty or repartition.
Sent from my phone

[Q] Galaxy Note doesn't go beyond logo and stuck at Downloading.. PLZ HELP :(

Hello all,
I read now the warning post and I understand now that probably I shouldn't have done it (so please be gentle ).. however maybe someone can still help me with my situation:
I've rooted my Galaxy Note with ClockworkMod recovery successfully and then busybox.
Then I went to recovery mode again (after restarting the phone), however it loaded Android regular recovery mode (not Clockwork), so I installed Clockwork again and without restarting performed WIPE DATA (maybe that was also a mistake?). After it was finished it restarted by itself and now its in the following status:
- stucks at GALAXY NOTE N7000 logo. Sometimes blinks, but never goes beyond it.
- Recovery mode exactly same - stuck at logo.
- when plugging USB it will show the battery, but it's like stuck then.
- Tried download mode, but it's stuck at Downloading... forever.
I couldn't find the exact case as mine, that it restarted by itself and stuck at logo now.
I backed up everything, the previous ROM and etc.
I am aware of the bricking bug of ICS, however I had the ClockworkMod installed, so what did I do wrong??
And most importantly, what should I do now? Can I do something via the download mode? I don't think Odin recognizes any connected device when I plug in the USB, but I don't know how to check if it does or not..
Thanks in advance!

Switch to download mode, connect to PC and install a stock JB (be sure to install the USB drivers before).
Make a snapshot of the errors an post it here.

http://forum.xda-developers.com/showthread.php?t=1424997
May be this helps ...
Just flash a new stock rom..
Sent from my GT-N7000 using xda premium

i believe u use wrong kernal so it's stuck ！ if u don't ever do any factory reset or wipes then u're stillsafe ！
if u do so ? then just follow the instructions above given by the 2members here ：p
if u still haven't do any wipes n factory reset then look for philz safe kernal wif ur rom version flash it n let it update for mins
n ur phone will resume operation ！

Trying
alvinhaw said:
i believe u use wrong kernal so it's stuck ！ if u don't ever do any factory reset or wipes then u're stillsafe ！
if u do so ? then just follow the instructions above given by the 2members here ：p
if u still haven't do any wipes n factory reset then look for philz safe kernal wif ur rom version flash it n let it update for mins
n ur phone will resume operation ！
Click to expand...
Click to collapse
Trying all that right now, will keep you posted.

what is my stock ROM?
whatever61 said:
Trying all that right now, will keep you posted.
Click to expand...
Click to collapse
I don't understand this.. my stock ROM was:
Baseband Version: N7000XXLB2
Kernel Version: 2.6.35.7-N7000XXLC1-CL1003701 [email protected] #2
Build number: GINGERBREAD.XXLC1
I don't know what coutnry, I bought it from Netherlands, I live in Belgium, but it could be from any country in the region!
I cannot find this one exactly. I find many with N7000XXLB2 and many with N7000XXLC1.
Which one should I choose?
Also, can I install a JB or ICS directly?

Please let me know I'm doing it right (cause this is getting really insanely ridicilous):
1. I install PhilZ recovery mode via the phone recovery mode.
2. I install a stock ROM (I tried many) via Odin download mode.
All the time stuck as Galaxy N7000 logo. Never goes past it.
Every time I install a stock ROM it also removes the Philz recevory mode, but maybe that's ok..
Anything I'm doing wrong??

Why don't you follow my advice from second post and then show us a snapshot of PC Odin.
No need for Philz when installing a stock Rom with PC Odin (it's always deleted).
And tell us what Rom you install.

ThaiDai said:
Why don't you follow my advice from second post and then show us a snapshot of PC Odin.
No need for Philz when installing a stock Rom with PC Odin (it's always deleted).
And tell us what Rom you install.
Click to expand...
Click to collapse
So I don't wipe anything and just go to download mode and install a PDA file of a STOCK ROM, that's it?
I tried that, but now I will be more specific (and in another guide they say to do some steps before, so its very confusing already).
I also asked above how do I know which ROM I should install?
and also, how do I get errors log? there were no errors when I was installing the PDA..

whatever61 said:
So I don't wipe anything and just go to download mode and install a PDA file of a STOCK ROM, that's it?
I tried that, but now I will be more specific (and in another guide they say to do some steps before, so its very confusing already).
I also asked above how do I know which ROM I should install?
and also, how do I get errors log? there were no errors when I was installing the PDA..
Click to expand...
Click to collapse
Just let THAIDAI knows which stock rom u're flashing !

alvinhaw said:
Just let THAIDAI knows which stock rom u're flashing !
Click to expand...
Click to collapse
Ok, here we go.
I was trying with ROM: N7000XXLC1_N7000OXALC1_N7000XXLB2_HOME.tar.md5
This is what I got from Odin (I hope that's what you meant by snapshot and not actual screenshot or something ):
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLC1_N7000OXALC1_N7000XXLB2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> factoryfs.img
<ID:0/008> NAND Write Start!!
<ID:0/008> zImage
<ID:0/008> hidden.img
<ID:0/008> modem.bin
<ID:0/008> cache.img
<ID:0/008> RQT_CLOSE !!
<ID:0/008> RES OK !!
<ID:0/008> Removed!!
<ID:0/008> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
This is something new: just after it was completed it booted to recovery mode and gave me the following message:
Android system recovery <3e>
Finding update package
bla bla
Successfuly installed package.
Wiping cache..
Formatting /cache
Cache wipe complete.
E:failed to mount /data (unknown error: 0)
your storage not prepared yete, please use UI menu to format and reboot actions.
copy application failed.
Applying multi-CSC
Can't access to '/system/csc/ATO/system'
Successfully applied multi-CSC.
and it still doesn't boot.. gonna try another ROM now and post here the results.

Now tried with:
N7000XXLRI_N7000XXLRB_N7000XEFLP2_HOME.tar.md5
This is the original original ROM that I had when I just bought the phone.3
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLRI_N7000XXLRB_N7000XEFLP2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> cache.img
<ID:0/008> NAND Write Start!!
<ID:0/008> factoryfs.img
<ID:0/008> hidden.img
<ID:0/008> modem.bin
<ID:0/008> zImage
<ID:0/008> RQT_CLOSE !!
<ID:0/008> RES OK !!
<ID:0/008> Removed!!
<ID:0/008> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
No going into recovery mode after restart this time and still same problem.

when you flash a stock rom with pc odin, the phone may not boot. If you have flashed a GB rom then when you are stuck at logo enter stock recovery with three button combo and then wipe data factory reset, wipe cache and then reboot.

I flashed a stock rom as explained above, not a GB. I tried wiping cache and all data through recovery. Nothing helps. You say it might not boot, so how do I make it boot with Stock ROM?

stock roms can be ginger bread (GB), or ICS or JB (jelly Bean)
flash a GB stock rom, wait for the proceedure to finish completely, when you see its not booting then use three buttons to get into stock recovery and then wipe then reboot

rraaka said:
stock roms can be ginger bread (GB), or ICS or JB (jelly Bean)
flash a GB stock rom, wait for the proceedure to finish completely, when you see its not booting then use three buttons to get into stock recovery and then wipe then reboot
Click to expand...
Click to collapse
I already did, the last post was a GB, i tried to wipe out everything afterwards also.

ThaiDai, please see my replies, I did as you requested..
Thanks

whatever61 said:
I've rooted my Galaxy Note with ClockworkMod recovery successfully and then busybox.
Then I went to recovery mode again (after restarting the phone), however it loaded Android regular recovery mode (not Clockwork), so I installed Clockwork again and without restarting performed WIPE DATA ...
....I am aware of the bricking bug of ICS, however I had the ClockworkMod installed, so what did I do wrong??
Thanks in advance!
Click to expand...
Click to collapse
By "ClockworkMod" you mean CWM.zip right? This is a temporary recovery that disappears upon reboot. It also LETHAL to wipe with when running on top of a stock ICS kernel.
So to sum up;-
You were running Stock ICS.
You flashed CWM.zip (from YouTube or where ever) from stock 3e recovery and then flashed Root/busybox file.
Booted back into stock recovery, flashed CWM.zip again and performed wipe data/factory reset with it.
How am I going so far?
Bad news - you have most likely superbricked your device.
If so,new MOBO or repartition is only way out now

it might be mess up.. try get 5files wif bootloader n place it accordingly in odin .
go here to study http://forum.xda-developers.com/showthread.php?t=1424997

shoey63 said:
By "ClockworkMod" you mean CWM.zip right? This is a temporary recovery that disappears upon reboot. It also LETHAL to wipe with when running on top of a stock ICS kernel.
So to sum up;-
You were running Stock ICS.
You flashed CWM.zip (from YouTube or where ever) from stock 3e recovery and then flashed Root/busybox file.
Booted back into stock recovery, flashed CWM.zip again and performed wipe data/factory reset with it.
How am I going so far?
Bad news - you have most likely superbricked your device.
If so,new MOBO or repartition is only way out now
Click to expand...
Click to collapse
Yep, emmc bricked. Send it to servicecenter, they repaired it for free, for me. Or you can do the workaround http://forum.xda-developers.com/showthread.php?t=1667886 , but i dont would do that, as you will get many freezes maybe. Thats very annoying.
Regards

[Q] How to go back to previous ROM version?

Hi everyone,
Long time no see.
I updated the ROM to the latest version last week, i.e. Android 4.1.2, n7000xxlso, kernel version 3.0.31-906407, builder number JZ054K.N7000XXLSZ. This update sucks as it drains my battery very much. In addition, the phone became less responsive possibly due to less 'free space/free memory' left. I would like to go back to my previous version, could anybody kindly advise how I can do that please? My phone is SIM-FREE, I am in England.
Many thanks in advance.

Download your old version and install it. Because you didn't tell us what your old version was, there isn't much help possible, isn't it?
a) Stock version from sammobile, install it with PC Odin
b) Custom Rom: follow the installation instructions in the specific thread.

ThaiDai said:
Download your old version and install it. Because you didn't tell us what your old version was, there isn't much help possible, isn't it?
a) Stock version from sammobile, install it with PC Odin
b) Custom Rom: follow the installation instructions in the specific thread.
Click to expand...
Click to collapse
Many thanks, ThaiDai
The previous version is Android 2.3.6, firmware version is 2.6.35.7-N7000xxkka, this info is retrieved from my previous post.

londoneye said:
Many thanks, ThaiDai
The previous version is Android 2.3.6, firmware version is 2.6.35.7-N7000xxkka, this info is retrieved from my previous post.
Click to expand...
Click to collapse
If you want to go back to this GB version, download it from sammobile.com or here from one of the old Stock Rom threads (please search yourself for it). Install it with PC Odin. If you do not know about this read Dr. Ketans's thread.

ThaiDai said:
If you want to go back to this GB version, download it from sammobile.com or here from one of the old Stock Rom threads (please search yourself for it). Install it with PC Odin. If you do not know about this read Dr. Ketans's thread.
Click to expand...
Click to collapse
Hi ThaiDai, many thanks.
However, I think I may have bricked my note now. I downloaded the official GB ROM (N7000XXLRK---4.0.4/12.07.24-N7000XEULP5---Download--United Kingdom / Ireland), which should be my previous ROM (the one I mentioned in previous post was wrong, I remember I have updated it to ICS). I closely follow the steps suggested by the post, and from Odin I see this info:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLRK_N7000XXLRK_N7000XEULP5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> cache.img
<ID:0/004> NAND Write Start!!
<ID:0/004> factoryfs.img
<ID:0/004> hidden.img
<ID:0/004> modem.bin
<ID:0/004> zImage
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Removed!!
<ID:0/003> Added!!
After this procedure, the phone reboots but stucks at 'SAMSUNG' logo and won't carry on anymore...
Urgent advice is need, please!
Many thanks.

Check if you can get into download mode.. If you can try to flash GB this time.. And also do not do any wipes on 4.0.4 in recovery (if can go into recovery mode).. Did you do any wipe on JB before flaahing ICS?
Sent from my GT-N7000 using xda app-developers app

treacherous_hawk said:
Check if you can get into download mode.. If you can try to flash GB this time.. And also do not do any wipes on 4.0.4 in recovery (if can go into recovery mode).. Did you do any wipe on JB before flaahing ICS?
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Can get into download mode and recovery mode. I think perhaps I should try the latest JB ROM? Are you able to let me know which GB ROM to use this time?
Many thanks

You can try either JB or GB.. You can find them in dr ketans thread.. If you are installing jb then after flashing make sure to install philz kernel (zip file in stock recovery).. But as you are stuck you might have to do the wipes.. You may download philz kernel for ics corresponding to your firmware and do all the wipes and then flash jb..
Sent from my GT-N7000 using xda app-developers app

treacherous_hawk said:
You can try either JB or GB.. You can find them in dr ketans thread.. If you are installing jb then after flashing make sure to install philz kernel (zip file in stock recovery).. But as you are stuck you might have to do the wipes.. You may download philz kernel for ics corresponding to your firmware and do all the wipes and then flash jb..
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Many thanks, my friend.
I notice that the note can be charged thus I guess it is not 100% dead at this stage, it is possible I can save it.
Please could you advise some important steps on how to complete the process of installing an official GB ROM. My note is from O2 UK, ORIGINALLY UNLOCKED, and currently with T-mobile UK SIM card.
Questions:
1. Can I download the latest GERMANY version of GB or JB?
2. I know how to do 'downloading' mode and install ROM via PC Odin, but how to install Philz kernel through 'recovery' mode?
I would be most grateful if you could guide me to the steps for the whole process/steps to complete the ROM installation based on my situation, thanks so much!

londoneye said:
Many thanks, my friend.
I notice that the note can be charged thus I guess it is not 100% dead at this stage, it is possible I can save it.
Please could you advise some important steps on how to complete the process of installing an official GB ROM. My note is from O2 UK, ORIGINALLY UNLOCKED, and currently with T-mobile UK SIM card.
Questions:
1. Can I download the latest GERMANY version of GB or JB?
2. I know how to do 'downloading' mode and install ROM via PC Odin, but how to install Philz kernel through 'recovery' mode?
I would be most grateful if you could guide me to the steps for the whole process/steps to complete the ROM installation based on my situation, thanks so much!
Click to expand...
Click to collapse
Check the this link for downloading stock JB and also for install method:
http://forum.xda-developers.com/showthread.php?t=1424997
first you need to put the philz kernel (zip version not tar) on your external memory from here:
http://www.mediafire.com/?3ale6m9q6b6a3
and then go to stock recovery and select install zip and choose the zip file and flash it, reboot to recovery again, do all the wipes and try flashing JB from 1st link.

treacherous_hawk said:
Check the this link for downloading stock JB and also for install method:
http://forum.xda-developers.com/showthread.php?t=1424997
first you need to put the philz kernel (zip version not tar) on your external memory from here:
http://www.mediafire.com/?3ale6m9q6b6a3
and then go to stock recovery and select install zip and choose the zip file and flash it, reboot to recovery again, do all the wipes and try flashing JB from 1st link.
Click to expand...
Click to collapse
Great advice, a very big thank you my dear friend. I saved my note, hahahahaha.....

londoneye said:
Great advice, a very big thank you my dear friend. I saved my note, hahahahaha.....
Click to expand...
Click to collapse
Glad to hear that...

[Q] Infinite Boot Loop! Cant Get into Recovery mode

Hello Thanks in Advance For Your time
My n7000 had r5 kernel with carbon rom 4.4. I Chose to reboot to system from kernel it asked me 1)no 2)fix system reboot i chose 2 and i got stuck at reboot loop but i could access recovery and download mode.
then i try to install philz_touch_6.07.9-n7000 after wiping data cache and dalvik through recovery and rebooted back to philz recovery
after then i flash [ROM][4.4.2] CyanogenMod 11.0 [OFFICIAL][NIGHTLIES] after wiping data cache and dalvik
and i got stuck at samsung logo cant get into recovery mode but can access download mode
i tried to reflash philz kernel through odin but it says
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.07.9-n7000.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I cant even charge my phone it shows 100% battery when i plug in
Please help Thanks in advance

davslove said:
Hello Thanks in Advance For Your time
My n7000 had r5 kernel with carbon rom 4.4. I Chose to reboot to system from kernel it asked me 1)no 2)fix system reboot i chose 2 and i got stuck at reboot loop but i could access recovery and download mode.
then i try to install philz_touch_6.07.9-n7000 after wiping data cache and dalvik through recovery and rebooted back to philz recovery
after then i flash [ROM][4.4.2] CyanogenMod 11.0 [OFFICIAL][NIGHTLIES] after wiping data cache and dalvik
and i got stuck at samsung logo cant get into recovery mode but can access download mode
i tried to reflash philz kernel through odin but it says
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.07.9-n7000.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I cant even charge my phone it shows 100% battery when i plug in
Please help Thanks in advance
Click to expand...
Click to collapse
You can't flash Philz Touch 6 using odin.
You need to flash PhilZ kernel 5, odin version.
link here:
http://d-h.st/users/philz_touch/?fld_id=16061#files
Hope you can work it out.

davslove said:
Hello Thanks in Advance For Your time
My n7000 had r5 kernel with carbon rom 4.4. I Chose to reboot to system from kernel it asked me 1)no 2)fix system reboot i chose 2 and i got stuck at reboot loop but i could access recovery and download mode.
then i try to install philz_touch_6.07.9-n7000 after wiping data cache and dalvik through recovery and rebooted back to philz recovery
after then i flash [ROM][4.4.2] CyanogenMod 11.0 [OFFICIAL][NIGHTLIES] after wiping data cache and dalvik
and i got stuck at samsung logo cant get into recovery mode but can access download mode
i tried to reflash philz kernel through odin but it says
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.07.9-n7000.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I cant even charge my phone it shows 100% battery when i plug in
Please help Thanks in advance
Click to expand...
Click to collapse
i had the same problem yesterday.
i solved it by changing usb cable and trying different usb port and using odin 3.09 with stock rom file (jb 4.1.2).
after flash boot into recovery and flash this philz file : PhilZ-cwm6-XXLTA-ATL-5.15.0-signed.zip
hope this help you.

cant flash cyanogenmod 11
thx a lot got recovery but i am unable to flash cyanogenmod 11 and y is the battery status always 100% in recovery and normal switched off charging
Does it anything to do with the battery? can i install rom with charger plugged in if no battery charge coz it not charging
i tried installing carbon rom and cyanogenmod 11 but it reboots after displaying installing package

davslove said:
thx a lot got recovery but i am unable to flash cyanogenmod 11 and y is the battery status always 100% in recovery and normal switched off charging
Does it anything to do with the battery? can i install rom with charger plugged in if no battery charge coz it not charging
i tried installing carbon rom and cyanogenmod 11 but it reboots after displaying installing package
Click to expand...
Click to collapse
If you have cm11 installed. Reboot to recovery. Do a factory reset.
Sent from my Nexus 5 using Tapatalk

AndroidSlave said:
If you have cm11 installed. Reboot to recovery. Do a factory reset.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
cant get into recovery mode tried installing stock rom using odin installed it successfully but no solution tried installing it with pit file still nothing
my battery has no charge and its not charging maybe that is the issue?
tried upgrading with kies using tools>firmware upgrade and initialisation but it says gt-n7000 does not support initialisaztion
currently i am stuck at empty battery icon with refresh circle and when i try to go into recovery mode i see android icon with blue cirle refreshing for a second and cell reboots to same empty battery icon with a refresh circle
Pleasssssssssssssssse HELP

davslove said:
cant get into recovery mode tried installing stock rom using odin installed it successfully but no solution tried installing it with pit file still nothing
my battery has no charge and its not charging maybe that is the issue?
Click to expand...
Click to collapse
After flashing stock rom via odin you need to boot into recovery. Then wipe cache and data. It is better to glash Philz kernel odin version after flashing stock rom. Then get to recovery and wipe.
Sent from my GT-N7000 using Tapatalk 2

forest1971 said:
After flashing stock rom via odin you need to boot into recovery. Then wipe cache and data. It is better to glash Philz kernel odin version after flashing stock rom. Then get to recovery and wipe.
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Hey thx
i wiped data and cache using recovery but stuck at reboot next what?
i can access recovery and download mode both now

I would try to use Philz recovery to do 'clean to install rom' then flash a stock based custom rom.zip.
Sent from my GT-N7000 using Tapatalk 2

forest1971 said:
I would try to use Philz recovery to do 'clean to install rom' then flash a stock based custom rom.zip.
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Tried that stuck at the same
Problems i am facing currently
1)cant operate phone with battery it gives no response
2)when i plug in battery doesnt charge battery status shows 100%

davslove said:
Tried that stuck at the same
Problems i am facing currently
1)cant operate phone with battery it gives no response
2)when i plug in battery doesnt charge battery status shows 100%
Click to expand...
Click to collapse
you need to describe more detail what rom you flashed and what error it gave.
With little info there is no way to help.

forest1971 said:
you need to describe more detail what rom you flashed and what error it gave.
With little info there is no way to help.
Click to expand...
Click to collapse
at stock recovery tried installing philz 6.25 zip using rcovery got status 7 error
then installed philz using odin but now while installing latest carbon after wipe phone reboots after displaying installing package
tried installing philz 6.25 from philz recovery shows same reboots after displaying installing package

davslove said:
at stock recovery tried installing philz 6.25 zip using rcovery got status 7 error
then installed philz using odin but now while installing latest carbon after wipe phone reboots after displaying installing package
tried installing philz 6.25 from philz recovery shows same reboots after displaying installing package
Click to expand...
Click to collapse
You did not read enough on what is needed to install 4.4.2. Rule of thumb: always read and follow rom flash instruction carefully before you tried to install a new rom!
Btw, Philz Touch recovery will not work now. You need to use Philz Kernel with recovery.
You need to read more to figure these things out before getting yourself into more troubles. If you cannot understand instruction well, then better stay with stock or stock-based 4.12 to be safe. Cheers

forest1971 said:
You did not read enough on what is needed to install 4.4.2. Rule of thumb: always read and follow rom flash instruction carefully before you tried to install a new rom!
Btw, Philz Touch recovery will not work now. You need to use Philz Kernel with recovery.
You need to read more to figure these things out before getting yourself into more troubles. If you cannot understand instruction well, then better stay with stock or stock-based 4.12 to be safe. Cheers
Click to expand...
Click to collapse
sorry brother me being noob can you please brief me stepwise what i need to do and if possible link me
i will describe my current situation i am on philz touch 5 can access recovery and download
Please Help me!
i promise i will read carefully and do it as you say be my saviour

davslove said:
sorry brother me being noob can you please brief me stepwise what i need to do and if possible link me
i will describe my current situation i am on philz touch 5 can access recovery and download
Please Help me!
i promise i will read carefully and do it as you say be my saviour
Click to expand...
Click to collapse
From Philz recovery you can do "clean to install rom" then flash a 4.1.2 custom rom. Then you should be good.
If you want 4.4.2 then you need to flash raw4 kernel, then reboot into recovery (not to system) then flash the 4.4.2 rom.
BTW, as I said, read instruction carefully from the rom thread that you want and follow exactly the instruction by the rom dev.

forest1971 said:
From Philz recovery you can do "clean to install rom" then flash a 4.1.2 custom rom. Then you should be good.
If you want 4.4.2 then you need to flash raw4 kernel, then reboot into recovery (not to system) then flash the 4.4.2 rom.
BTW, as I said, read instruction carefully from the rom thread that you want and follow exactly the instruction by the rom dev.
Click to expand...
Click to collapse
Tried installing [ROM][4.1.2][XXLTC]TouchWizLite v1.6[05MAR2014] after
3. On CWM Recovery again, Go to Wipe Data/Factory Reset -> Wipe Data/Factory Reset.
4. Go to Mounts and Storage -> Format /system
5. Go to Mounts and Storage -> Format /preload
but i am unable to install it stuck after opening package > installing package > cell reboots
i am on dev preferred PhilZ-cwm6-XXLTA-ATL-5.15.0-signed.zip
y is that i cant operate using battery
and when i plugin battery status shows 100%
is this some hardware isuue?

davslove said:
Tried installing [ROM][4.1.2][XXLTC]TouchWizLite v1.6[05MAR2014] after
3. On CWM Recovery again, Go to Wipe Data/Factory Reset -> Wipe Data/Factory Reset.
4. Go to Mounts and Storage -> Format /system
5. Go to Mounts and Storage -> Format /preload
but i am unable to install it stuck after opening package > installing package > cell reboots
i am on dev preferred PhilZ-cwm6-XXLTA-ATL-5.15.0-signed.zip
Click to expand...
Click to collapse
Try with another rom or another download. Do 'clean to install' as I said and also wipe dalvik cache (under advanced menu).
Sent from my GT-N7000 using Tapatalk 2

forest1971 said:
Try with another rom or another download. Do 'clean to install' as I said and also wipe dalvik cache (under advanced menu).
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Dont mind but any you will suggest will be good

forest1971 said:
Try with another rom or another download. Do 'clean to install' as I said and also wipe dalvik cache (under advanced menu).
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Tried installing other 4.1.2 roms like paranodroid utacka but couldnt install phone reboots after opening package > installing package
might be some other isuue?
because i cant charge battery and can operate using plugin how to fix that?
even stock jb rom doesnt fix it please help me invoke your 6 senses get me a proper fix?

Please aomeone help please

[Q] Not able to install cwm custom recovery in galaxy n7000

Hi,
I have rooted my galaxy n7000 running on stock 4.1.2 DDLSC using the supersu. After root tried to install the cmw custom recovery but failed then tried to flash/install the philz custom recovery and its also failed. I have tried following options.
1. downloaded the .zip version of philz and tried to flash it using stock recovery "Update from external storage". When it was updating suddenly phone was getting turned off. Tried two to three times.
2. Also tried the ODIN v1.85 and v3+. downloaded the tar.md5 file matching to n7000, and when tried to flash it using ODIN two times it got struck at "SetupConnection: and 2 to 3 times it got failed. saying
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.12.8-n7000.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> recovery.img
<ID:0/008> NAND Write Start!!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please help me. any kind of your help will be greatly appreciated.
I am getting mad now.
(Phone is working fine not bricked)

Exactly what PhilZ kernel do you have downloaded?

this "philz_touch_6.12.8-n7000.tar.md5" i have downloaded from the site.
Rooted using Supersu.
My n7000 details are given below.
Model number
GT-N7000
Android version
4.1.2
Baseband version
N7000DDLs6
Kernal version
3.0.31-906407
[email protected] #3
SMP PREEMPT Web Mar 6 19:53:40 KST 2013
Build number
JZO54K.N7000DDLSC
Hope this help. I am still on stock. Just rooted with supersu and trying to install customer recovery.

What is the reason for other recovery?
What rom do you want to install?

User_99 said:
What is the reason for other recovery?
What rom do you want to install?
Click to expand...
Click to collapse
wanted to install the lollipop or kitkat.
Please guide me how to install philz or cmw recovery.
What am I doing wrong, why the philz is not getting flash using ODIN or stock recovery.
I have also tried the "flashify" app. and when flashing philz recovery its saying "Partition flashed successfully" but when going to recovery mode there I find stock recovery. Nothing is working.

you need to flash a custom kernel which includes the recovery. as far as i know it is not possible to flash recovery only with keeping stock kernel. philz provided several kernels for N7000 with appropriate recovery for many different android versions.

Zoomselection said:
wanted to install the lollipop or kitkat.
Please guide me how to install philz or cmw recovery.
What am I doing wrong, why the philz is not getting flash using ODIN or stock recovery.
I have also tried the "flashify" app. and when flashing philz recovery its saying "Partition flashed successfully" but when going to recovery mode there I find stock recovery. Nothing is working.
Click to expand...
Click to collapse
Get a philz kernel that matches your ROM build number. In your case its ddlsc. If you don't find that xxlta will also do.

I understand that need to download the kernal. just to confirm is it "Signed" .zip file of philz?
Last time I was rooted with the philz signed .zip file. Root was successfull but recovery was still stock. and when I flash the recovery using CWM App. my phone bricked. it was struck at samsung logo. Some how I flashed the stock rom and my note got a life.
Now this time I am scared to do the same. But still will give a try.
Right now my phone is rooted with supersu. To flash the philz kernal with recovery, Do i have to unroot first and then flash? Or I can flash without unrooting?
Thanks for suppoting. XDA is the good place for anyking of troublesooting and memebers here are best in supporting.
Can you please provide the url from where to download the philz kernal.

You can use the zip or tar file. Zip is preferred. You don't need to unroot.

Thanks you so much. was able to successful install the philz recovery
My phone is bricked due to my friend mistake. As per your suggestion I have downloaded the philz kernel. flashed it and philz recovery was installed. I was so happy, My friend asked to see the phone and I gave him. In my phone the "ClockWorkMod app" was installed from google play. My friend asked me whether he can backup the data or not. I said ok do it. He open the "ClockWorkMode app" and went to backup and clicked on it. it asked for the name of the backup. He have given the name and clicked on the ok button. Suddently phone got turned off and was struck at "Galaxy Note GT N7000" boot screen. I tried to do the power off using power button but again it was getting turned on automatically and getting struck at boot screen. Taken the battery out.
tried to go into recovery mode but was not able to go there. Only download mode is working. I flash the "Philz recovery" using ODIN.
and when reboot the phone got struck at same boot screen with an additional yellow triangle.
Can it be re-cover or it is hard brick? Please suggest something. I have downloaded the stock DDLC tar file from sammobile site. Do I need the partition .pit file? I tried to find out the partition .pit file for 16gb version but all links are broken.
Help me please.

Zoomselection said:
Thanks you so much. was able to successful install the philz recovery
My phone is bricked due to my friend mistake. As per your suggestion I have downloaded the philz kernel. flashed it and philz recovery was installed. I was so happy, My friend asked to see the phone and I gave him. In my phone the "ClockWorkMod app" was installed from google play. My friend asked me whether he can backup the data or not. I said ok do it. He open the "ClockWorkMode app" and went to backup and clicked on it. it asked for the name of the backup. He have given the name and clicked on the ok button. Suddently phone got turned off and was struck at "Galaxy Note GT N7000" boot screen. I tried to do the power off using power button but again it was getting turned on automatically and getting struck at boot screen. Taken the battery out.
tried to go into recovery mode but was not able to go there. Only download mode is working. I flash the "Philz recovery" using ODIN.
and when reboot the phone got struck at same boot screen with an additional yellow triangle.
Can it be re-cover or it is hard brick? Please suggest something. I have downloaded the stock DDLC tar file from sammobile site. Do I need the partition .pit file? I tried to find out the partition .pit file for 16gb version but all links are broken.
Help me please.
Click to expand...
Click to collapse
Ouch, try reflashing everything according to the previous instructions again. Remember to clear cache and do a factory reset after that, the Rom Manager aka ClockWorkMode app is kinda useless..

Back to life,
After bricking my phone I was in so much stress. Was thinking all the possible way like re-partition csc etc... then suddenly thought why not flashing the stock rom which is downloaded. Puts the phone in download mode. open the ODIN 1.85 connected the phone with pc and selected the stock DDLSC tar md5 file, taken a deep breath and remembered all the gods and clicked on the start button.
flashing started within 10 min it finished and phone re-booted. back to stock rom without loosing any kind of data. To my surprise all the app which was moved to external card was automatically detected and checked the sd phone memory and all my personal file and data with contacts and messages was available. Once again many many thanks to XDA and all of you.
Again rooted the phone with Philz kernel. LOL.
Can you please help me. How to do nandroid backup and whether it can be flash by ODIN or not.

Make a nandroid backup by booting into recovery and choosing backup. Or use an app like zipinstaller.
No odin cannot flash a nandroid backup. It has to be restored using recovery only.