Hi,
I have rooted my galaxy n7000 running on stock 4.1.2 DDLSC using the supersu. After root tried to install the cmw custom recovery but failed then tried to flash/install the philz custom recovery and its also failed. I have tried following options.
1. downloaded the .zip version of philz and tried to flash it using stock recovery "Update from external storage". When it was updating suddenly phone was getting turned off. Tried two to three times.
2. Also tried the ODIN v1.85 and v3+. downloaded the tar.md5 file matching to n7000, and when tried to flash it using ODIN two times it got struck at "SetupConnection: and 2 to 3 times it got failed. saying
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.12.8-n7000.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> recovery.img
<ID:0/008> NAND Write Start!!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please help me. any kind of your help will be greatly appreciated.
I am getting mad now.
(Phone is working fine not bricked)
Exactly what PhilZ kernel do you have downloaded?
this "philz_touch_6.12.8-n7000.tar.md5" i have downloaded from the site.
Rooted using Supersu.
My n7000 details are given below.
Model number
GT-N7000
Android version
4.1.2
Baseband version
N7000DDLs6
Kernal version
3.0.31-906407
[email protected] #3
SMP PREEMPT Web Mar 6 19:53:40 KST 2013
Build number
JZO54K.N7000DDLSC
Hope this help. I am still on stock. Just rooted with supersu and trying to install customer recovery.
What is the reason for other recovery?
What rom do you want to install?
User_99 said:
What is the reason for other recovery?
What rom do you want to install?
Click to expand...
Click to collapse
wanted to install the lollipop or kitkat.
Please guide me how to install philz or cmw recovery.
What am I doing wrong, why the philz is not getting flash using ODIN or stock recovery.
I have also tried the "flashify" app. and when flashing philz recovery its saying "Partition flashed successfully" but when going to recovery mode there I find stock recovery. Nothing is working.
you need to flash a custom kernel which includes the recovery. as far as i know it is not possible to flash recovery only with keeping stock kernel. philz provided several kernels for N7000 with appropriate recovery for many different android versions.
Zoomselection said:
wanted to install the lollipop or kitkat.
Please guide me how to install philz or cmw recovery.
What am I doing wrong, why the philz is not getting flash using ODIN or stock recovery.
I have also tried the "flashify" app. and when flashing philz recovery its saying "Partition flashed successfully" but when going to recovery mode there I find stock recovery. Nothing is working.
Click to expand...
Click to collapse
Get a philz kernel that matches your ROM build number. In your case its ddlsc. If you don't find that xxlta will also do.
I understand that need to download the kernal. just to confirm is it "Signed" .zip file of philz?
Last time I was rooted with the philz signed .zip file. Root was successfull but recovery was still stock. and when I flash the recovery using CWM App. my phone bricked. it was struck at samsung logo. Some how I flashed the stock rom and my note got a life.
Now this time I am scared to do the same. But still will give a try.
Right now my phone is rooted with supersu. To flash the philz kernal with recovery, Do i have to unroot first and then flash? Or I can flash without unrooting?
Thanks for suppoting. XDA is the good place for anyking of troublesooting and memebers here are best in supporting.
Can you please provide the url from where to download the philz kernal.
You can use the zip or tar file. Zip is preferred. You don't need to unroot.
Thanks you so much. was able to successful install the philz recovery
My phone is bricked due to my friend mistake. As per your suggestion I have downloaded the philz kernel. flashed it and philz recovery was installed. I was so happy, My friend asked to see the phone and I gave him. In my phone the "ClockWorkMod app" was installed from google play. My friend asked me whether he can backup the data or not. I said ok do it. He open the "ClockWorkMode app" and went to backup and clicked on it. it asked for the name of the backup. He have given the name and clicked on the ok button. Suddently phone got turned off and was struck at "Galaxy Note GT N7000" boot screen. I tried to do the power off using power button but again it was getting turned on automatically and getting struck at boot screen. Taken the battery out.
tried to go into recovery mode but was not able to go there. Only download mode is working. I flash the "Philz recovery" using ODIN.
and when reboot the phone got struck at same boot screen with an additional yellow triangle.
Can it be re-cover or it is hard brick? Please suggest something. I have downloaded the stock DDLC tar file from sammobile site. Do I need the partition .pit file? I tried to find out the partition .pit file for 16gb version but all links are broken.
Help me please.
Zoomselection said:
Thanks you so much. was able to successful install the philz recovery
My phone is bricked due to my friend mistake. As per your suggestion I have downloaded the philz kernel. flashed it and philz recovery was installed. I was so happy, My friend asked to see the phone and I gave him. In my phone the "ClockWorkMod app" was installed from google play. My friend asked me whether he can backup the data or not. I said ok do it. He open the "ClockWorkMode app" and went to backup and clicked on it. it asked for the name of the backup. He have given the name and clicked on the ok button. Suddently phone got turned off and was struck at "Galaxy Note GT N7000" boot screen. I tried to do the power off using power button but again it was getting turned on automatically and getting struck at boot screen. Taken the battery out.
tried to go into recovery mode but was not able to go there. Only download mode is working. I flash the "Philz recovery" using ODIN.
and when reboot the phone got struck at same boot screen with an additional yellow triangle.
Can it be re-cover or it is hard brick? Please suggest something. I have downloaded the stock DDLC tar file from sammobile site. Do I need the partition .pit file? I tried to find out the partition .pit file for 16gb version but all links are broken.
Help me please.
Click to expand...
Click to collapse
Ouch, try reflashing everything according to the previous instructions again. Remember to clear cache and do a factory reset after that, the Rom Manager aka ClockWorkMode app is kinda useless..
Back to life,
After bricking my phone I was in so much stress. Was thinking all the possible way like re-partition csc etc... then suddenly thought why not flashing the stock rom which is downloaded. Puts the phone in download mode. open the ODIN 1.85 connected the phone with pc and selected the stock DDLSC tar md5 file, taken a deep breath and remembered all the gods and clicked on the start button.
flashing started within 10 min it finished and phone re-booted. back to stock rom without loosing any kind of data. To my surprise all the app which was moved to external card was automatically detected and checked the sd phone memory and all my personal file and data with contacts and messages was available. Once again many many thanks to XDA and all of you.
Again rooted the phone with Philz kernel. LOL.
Can you please help me. How to do nandroid backup and whether it can be flash by ODIN or not.
Make a nandroid backup by booting into recovery and choosing backup. Or use an app like zipinstaller.
No odin cannot flash a nandroid backup. It has to be restored using recovery only.
Related
My Galaxy Note GT-N7000 was on CM10 last night and I followed Zedomax's rootgalaxynote.com GT-N7000 unrooting method and when I was installing the Mobile Odin Lite on my phone, it said it needs to download more add-on to be able to flash it, then all the sudden my internet connection was down, so I couldn't download it, but followed his instruction and tried wipe and factory reset, but it got stuck at formatting (no progress), then I flashed cm9 again, but it was stuck at cm9 boot logo, nothing else. Then I followed Zedomax's rootgalaxynote.com's first method using my Computer Desktop but
"<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000DXKL1_N7000OLBKJ6_N7000DXKJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> factoryfs.img
" it got stuck at here, no progress. The only thing I can do with my phone is that to either put on download mode or it says "Firmware upgrade encountered an isssue. Please select recovery mode in Kies & try again." Please help me with this friends. I am looking forward to your help. Thank you.
Khai.
you give not detail as needed. but nevermine, from the last part it seems you has bricked your phone.
i think you might need to refer "hg42" thread to revive your note.
Sad to be hear that.
Sent from my GT-N7000 using xda premium
immediately contact dr.ketan
khaino said:
My Galaxy Note GT-N7000 was on CM10 last night and I followed Zedomax's rootgalaxynote.com GT-N7000 unrooting method and when I was installing the Mobile Odin Lite on my phone, it said it needs to download more add-on to be able to flash it, then all the sudden my internet connection was down, so I couldn't download it, but followed his instruction and tried wipe and factory reset, but it got stuck at formatting (no progress), then I flashed cm9 again, but it was stuck at cm9 boot logo, nothing else. Then I followed Zedomax's rootgalaxynote.com's first method using my Computer Desktop but
"<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000DXKL1_N7000OLBKJ6_N7000DXKJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> factoryfs.img
" it got stuck at here, no progress. The only thing I can do with my phone is that to either put on download mode or it says "Firmware upgrade encountered an isssue. Please select recovery mode in Kies & try again." Please help me with this friends. I am looking forward to your help. Thank you.
Khai.
Click to expand...
Click to collapse
Contact dr.ketan for yr solution. He is the sweet n right person to guide u.
khaino said:
My Galaxy Note GT-N7000 was on CM10 last night and I followed Zedomax's rootgalaxynote.com GT-N7000 unrooting method and when I was installing the Mobile Odin Lite on my phone, it said it needs to download more add-on to be able to flash it, then all the sudden my internet connection was down, so I couldn't download it, but followed his instruction and tried wipe and factory reset, but it got stuck at formatting (no progress), then I flashed cm9 again, but it was stuck at cm9 boot logo, nothing else. Then I followed Zedomax's rootgalaxynote.com's first method using my Computer Desktop but
"<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000DXKL1_N7000OLBKJ6_N7000DXKJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> factoryfs.img
" it got stuck at here, no progress. The only thing I can do with my phone is that to either put on download mode or it says "Firmware upgrade encountered an isssue. Please select recovery mode in Kies & try again." Please help me with this friends. I am looking forward to your help. Thank you.
Khai.
Click to expand...
Click to collapse
the ever GOLDEN RULE: Don't ever ever attempt to WIPE data if your on a unsafe or on a stock ICS kernel. That's should be at the top of your list before you do anything on your phone. If you need to WIPE, make sure your already in a safe kernel or if you haven't still, then flash one.
Now going back on your perennial issue. The only thing you can and will do is FLASH a stock GB on download mode using PC ODIN. Yes Doc Ketan's thread/s have those old GB's ROM.. -> http://forum.xda-developers.com/showthread.php?t=1424997, follow it to a tee.
One added thing when your going to start to flash GB again... Pray, that it would not stuck back again at 'factoryfs.img'
Good luck bud!
No luck...yet.
letters_to_cleo said:
the ever GOLDEN RULE: Don't ever ever attempt to WIPE data if your on a unsafe or on a stock ICS kernel. That's should be at the top of your list before you do anything on your phone. If you need to WIPE, make sure your already in a safe kernel or if you haven't still, then flash one.
Now going back on your perennial issue. The only thing you can and will do is FLASH a stock GB on download mode using PC ODIN. Yes Doc Ketan's thread/s have those old GB's ROM.. -> http://forum.xda-developers.com/showthread.php?t=1424997, follow it to a tee.
One added thing when your going to start to flash GB again... Pray, that it would not stuck back again at 'factoryfs.img'
Good luck bud!
Click to expand...
Click to collapse
I spent two days straight working on it, but no luck. I think I am gonna contact Samsung and send it to them for the warranty and I don't know if they would know that I rooted it. But I am just gonna give a try. Please share your knowledge and thoughts. Thank you.
Reflash it with PC odin (Again? )... refer to Dr Ketan... I encounter same issues before, I just try try to reflash old GB... link at #4
khaino said:
I spent two days straight working on it, but no luck. I think I am gonna contact Samsung and send it to them for the warranty and I don't know if they would know that I rooted it. But I am just gonna give a try. Please share your knowledge and thoughts. Thank you.
Click to expand...
Click to collapse
Can you get the Note into Download mode?
If so, try using desktop Odin (latest desktop version not mobile version) and flash the Abyss 4.2 kernel. the Tar file is easily found on XDA. This is a GB kernel and should allow you to get into full Recovery. From there you can flash a new ROM as you are now on a safe kernel.
Tried that, but not sure about the latest desktop version.
Alba Donzo said:
Can you get the Note into Download mode?
If so, try using desktop Odin (latest desktop version not mobile version) and flash the Abyss 4.2 kernel. the Tar file is easily found on XDA. This is a GB kernel and should allow you to get into full Recovery. From there you can flash a new ROM as you are now on a safe kernel.
Click to expand...
Click to collapse
Hi, thank you for your message, I was on Abyskernel when I factory data reset, and tried to flash back to cm9 from cm10, but no luck. Then I used Odin3-v1.85 on desktop with Gingerbread Rom, it got stuck at factoryfs.img.. I have tried with different pc disabling firewall and anti virus. What is the latest desktop version of Odin that you know? What specific tar file do you know that is the best? Thank you again.
khaino said:
Hi, thank you for your message, I was on Abyskernel when I factory data reset, and tried to flash back to cm9 from cm10, but no luck. Then I used Odin3-v1.85 on desktop with Gingerbread Rom, it got stuck at factoryfs.img.. I have tried with different pc disabling firewall and anti virus. What is the latest desktop version of Odin that you know? What specific tar file do you know that is the best? Thank you again.
Click to expand...
Click to collapse
Latest Odin is 3.0.4
Sent from my GT-N7000 using xda app-developers app
khaino said:
Hi, thank you for your message, I was on Abyskernel when I factory data reset, and tried to flash back to cm9 from cm10, but no luck. Then I used Odin3-v1.85 on desktop with Gingerbread Rom, it got stuck at factoryfs.img.. I have tried with different pc disabling firewall and anti virus. What is the latest desktop version of Odin that you know? What specific tar file do you know that is the best? Thank you again.
Click to expand...
Click to collapse
your CM10 to CM9 downgrade sounds like a bad flash, it can happen. I would try Odin3 V3.05 with Abyss (search for "AbyssNotekernel42CWTouchOriginalLogo.tar" or go here - https://www.dropbox.com/s/yoe791qq3atbung/AbyssNotekernel42CWTouchOriginalLogo.tar).
this should allow you to install a safe kernel to flash from. if you can now access Recovery, then you can flash a ROM from there. I would use a Stock based one (I always recommend Chrack ROM or Criskelo), If you prefer, you can download a Stock tar file and use Odin but I would try downloading the latest Chrack ROM or Criskelo ROM, transferring it to your micro SD and flashing after you have installed the Abyss tar.
I hope this helps. Please hit Thanks if it did.
Question!
Alba Donzo said:
your CM10 to CM9 downgrade sounds like a bad flash, it can happen. I would try Odin3 V3.05 with Abyss (search for "AbyssNotekernel42CWTouchOriginalLogo.tar"
this should allow you to install a safe kernel to flash from. if you can now access Recovery, then you can flash a ROM from there. I would use a Stock based one (I always recommend Chrack ROM or Criskelo), If you prefer, you can download a Stock tar file and use Odin but I would try downloading the latest Chrack ROM or Criskelo ROM, transferring it to your micro SD and flashing after you have installed the Abyss tar.
I hope this helps. Please hit Thanks if it did.
Click to expand...
Click to collapse
You gave me the AbyssNotekernel, but the only thing my phone can now do when I turn on is either show a screen with "Firmware upgrade encounters an issue. Please select recovery mode in Kies and try again" or on download mode. Or is there any way I can use the Desktop Odin and try to install the AbyssNotekernel that you gave me? I really don't know bro. Thank you for the message, please let me know.
khaino said:
You gave me the AbyssNotekernel, but the only thing my phone can now do when I turn on is either show a screen with "Firmware upgrade encounters an issue. Please select recovery mode in Kies and try again" or on download mode. Or is there any way I can use the Desktop Odin and try to install the AbyssNotekernel that you gave me? I really don't know bro. Thank you for the message, please let me know.
Click to expand...
Click to collapse
Yes, the Abyss tar file is for use with Odin. install Odin on your PC, put the Note into Download and connect. Flash the tar file and wait for the Note to reboot (search for notes on how to flash with Odin if you're not 100% sure). you should now be able to use Recovery to flash a ROM from this safe kernel.
Just a quick question.
Alba Donzo said:
Yes, the Abyss tar file is for use with Odin. install Odin on your PC, put the Note into Download and connect. Flash the tar file and wait for the Note to reboot (search for notes on how to flash with Odin if you're not 100% sure). you should now be able to use Recovery to flash a ROM from this safe kernel.
Click to expand...
Click to collapse
Sorry I didn't explain in details, I am on pc Odin version 3.07 and clicked on PDA but the Abyss tar file is not appearing there even after unzipping it a couple of times on the desktop. Please let me know bro. Thank you for your response.
Khai.
khaino said:
Sorry I didn't explain in details, I am on pc Odin version 3.07 and clicked on PDA but the Abyss tar file is not appearing there even after unzipping it a couple of times on the desktop. Please let me know bro. Thank you for your response.
Khai.
Click to expand...
Click to collapse
.tar file is to be flashed with odin directly. It has an image inside and should not extract it. Should put the .tar file in one folder but not on desktop screen. Select pda box in odin and brow to the folder where you put .tar file. Should see it there.
BTW, if flash using CWM failed again, then should use hg42 scanner to check if there is partition damage.
http://forum.xda-developers.com/showthread.php?t=1823918
Update.
forest1971 said:
.tar file is to be flashed with odin directly. It has an image inside and should not extract it. Should put the .tar file in one folder but not on desktop screen. Select pda box in odin and brow to the folder where you put .tar file. Should see it there.
BTW, if flash using CWM failed again, then should use hg42 scanner to check if there is partition damage.
http://forum.xda-developers.com/showthread.php?t=1823918
Click to expand...
Click to collapse
Thanks for your patience on your instruction, I actually was able to flash the Abysskernel that you gave me with ODIN and it went straight to the recovery mode, but then I can't install anything, then I put it back to download mode and tried to flash a Gingerbread ROM, but as always it got stucked at factoryfs.img. What do you think I can do bro? Please let me know about it. Thank you.
Khai.
khaino said:
Thanks for your patience on your instruction, I actually was able to flash the Abysskernel that you gave me with ODIN and it went straight to the recovery mode, but then I can't install anything, then I put it back to download mode and tried to flash a Gingerbread ROM, but as always it got stucked at factoryfs.img. What do you think I can do bro? Please let me know about it. Thank you.
Khai.
Click to expand...
Click to collapse
It seem to show you have an emmc brick, although using the partition scanner will confirm. The options are to send to ss service for warranty or to revise using repartition. For warranty you will need to reset flash counter using a jig.
Sent from my phone
Update and question.
forest1971 said:
It seem to show you have an emmc brick, although using the partition scanner will confirm. The options are to send to ss service for warranty or to revise using repartition. For warranty you will need to reset flash counter using a jig.
Sent from my phone
Click to expand...
Click to collapse
Hi bro,
I flashed the Abysskernel again and it went to Samsung Galaxy Note GT-N7000 logo with big Triangle at the bottom and it then goes to Android system recovery <3e>, then it looks like there is no option for me to access the SD card, but its own 16GB storage it came with and that one has CM10 in it. Tried to flash that, but it says "E:failed to verify whole-file signature". If I attempt to claim for warranty will Samsung know that I rooted it after clearing the binary counts? Please let me know. Thank you for your instructions. If there is anything else you want me to try out, please let me know. Thank you.
Khai.
khaino said:
Hi bro,
I flashed the Abysskernel again and it went to Samsung Galaxy Note GT-N7000 logo with big Triangle at the bottom and it then goes to Android system recovery <3e>, then it looks like there is no option for me to access the SD card, but its own 16GB storage it came with and that one has CM10 in it. Tried to flash that, but it says "E:failed to verify whole-file signature". If I attempt to claim for warranty will Samsung know that I rooted it after clearing the binary counts? Please let me know. Thank you for your instructions. If there is anything else you want me to try out, please let me know. Thank you.
Khai.
Click to expand...
Click to collapse
Once reset flash counter the triangle will go and you can flash a stock kernel find link from dr.ketan toolbox, then it is ok to send to warranty.
Sent from my phone
Update.
forest1971 said:
Once reset flash counter the triangle will go and you can flash a stock kernel find link from dr.ketan toolbox, then it is ok to send to warranty.
Sent from my phone
Click to expand...
Click to collapse
Hi bro, it somehow managed to get on CWM and but any flashing was aborted. And tried to flash Criskelo, but got stuck at installing, no progress. What should I do? Thank you.
Just two options above, warranty or repartition.
Sent from my phone
This device is strange.
first,I use odin to try to flash recovery.I can flash success,but always enter the 3e recovery..I tried lots of recovery version...and always can flash success ,and always enter the 3e recovery , It's can't enter my recovery.
and than I try to use ROM MANAGER to flash CWM RECOVERY. It's success to flash and it's can enter.
And than I use this CWM RECOVERY to flash a "DMod V6" ROM(http://forum.xda-developers.com/showthread.php?t=2165575)
...And than ..after finish and reboot,the trobble is coming.....
can not enter system , always show "Samsung Galaxy S III mini", and reboot,it's reboot again and again.
I try to use odin to flash a original rom and it's not useful , it'is always reboot again and again.
I try to use samsung kies to fix it , but not useful.
I try to flash PARAM_I8190.tar.md5 and PARAM.tar , it's not useful.
I try to flash a pit file to repartition but it cannot flash into device:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Now , I can enter odin mode and CWM RECOVERY.
What can I do ? What should I do ?
Thanks!
and than I flash "cm10.1_golden.maclaw.20130712.zip"(bbs.gfan.com/forum.php?mod=viewthread&tid=6366912&extra=page%3D1)
It's can enter system.but i saw it not IMEI .
so i try to flash "GT-I8190_modem.bin-XXAMG1-update.zip"(bbs.gfan.com/forum.php?mod=viewthread&tid=6120250&extra=page%3D1)
and now ...It reboot and reboot again ...
I try to flash back to cm10.1 ...it's not useful...
..:crying::crying: what is the matter?
Now I also can enter CWM RECOVERY and odin mode
Try factory reset /wipe data then flash stock
Sent from my GT-I8190 using xda app-developers app
serophia said:
Try factory reset /wipe data then flash stock
Sent from my GT-I8190 using xda app-developers app
Click to expand...
Click to collapse
I done everything I can do .....
Someone flash a new rom it's can enter system but cant enter desktop , it's can wipe data to fix ..
but now I cant enter system......
Try to flash stock rom via odin, but i don't know how bad a missing IMEI is, don't know if it comes back..
No IMEI means no RIL no calls, no messages, no 3G network...
The only way to get it back is to take it back to Sammy's, but first try in any way you can to flash the original Samsung's ROM.
tux95 said:
Try to flash stock rom via odin, but i don't know how bad a missing IMEI is, don't know if it comes back..
Click to expand...
Click to collapse
I tried many many stock rom via odin...but all is not useful...it is still reboot again and again......
and now it's still can enter CWM RECOVERY and odin and can flash.
I think can use "dd if" backup a normal i8190 /dev/block/xxxx and use CWM RECOVERY to flash to my dead i1890.
It's can do ?
A few days ago my phone was on an endless boot loop.
Nothing worked (stock or custom rom) until someone suggested "La Fleur", a russian firmware from this post: Link
slowdyve said:
A few days ago my phone was on an endless boot loop.
Nothing worked (stock or custom rom) until someone suggested "La Fleur", a russian firmware from this post: Link
Click to expand...
Click to collapse
On thanks! It's may useful...but I have sent the phone back to the store...
thakns for this thread,im planning to flash my S3 mini with CM11 right now hope wont be needing this
Hello readers,
MY girlfriend decided that she wanted a costum ROM on her n7000. So she looked up how to do it on YouTube...
What she Tried to do was flash a kernel in stock recovery. She was on a ICS stock ROM, not rooted. And what she got was a phone that only went into download mode. When i turned it on it was stuck in the samsung screen. booting intoo recovery dint respond. Then she came to me. So i read on the xda forums that this might result in a bricked phone.
When i got it i tried tot flash speedmod 3k v13 kernel. Via PC Odin. It all completed normaly but the reboot (I know Odin a bit since i flash roms since the Sgs1 and now i still have an Sgs3.)
The problem we have now is that the cwmr v5.8.1.8 doesnt see the external SD. so i cant flash a rom of the sd. But now i am not shure if this is the emmc brick or my recovery doesnt support flashing from external SD cards. The SD card is good, tested it.
So if anyone knows what the best step from here is, please share it. I'm thinking about scanning For Bicked blocks. But i have never gone so far in computing. So im a bit scared of it.. XD Might reflash the kernel or update cwmr.
Download a stock Rom and try to install it with PC Odin.
If it stops with an error at factoryfs.img it is bricked.
If it succeeds you have a solid base for installing a Custom Rom (even if it is for your girl I wouldn't use a "costum" Rom).
ronnos said:
Hello readers,
MY girlfriend decided that she wanted a costum ROM on her n7000. So she looked up how to do it on YouTube...
What she Tried to do was flash a kernel in stock recovery. She was on a ICS stock ROM, not rooted. And what she got was a phone that only went into download mode. When i turned it on it was stuck in the samsung screen. booting intoo recovery dint respond. Then she came to me. So i read on the xda forums that this might result in a bricked phone.
When i got it i tried tot flash speedmod 3k v13 kernel. Via PC Odin. It all completed normaly but the reboot (I know Odin a bit since i flash roms since the Sgs1 and now i still have an Sgs3.)
The problem we have now is that the cwmr v5.8.1.8 doesnt see the external SD. so i cant flash a rom of the sd. But now i am not shure if this is the emmc brick or my recovery doesnt support flashing from external SD cards. The SD card is good, tested it.
So if anyone knows what the best step from here is, please share it. I'm thinking about scanning For Bicked blocks. But i have never gone so far in computing. So im a bit scared of it.. XD Might reflash the kernel or update cwmr.
Click to expand...
Click to collapse
I would first go to PhilZ thread
http://forum.xda-developers.com/showthread.php?p=31911620
Look for a kernel for ICS, any of the version 3.99 should do. Choose the tar file to flash it via odin. After that try go into recovery again to see if it works.
Sent from my phone.
forest1971 said:
I would first go to PhilZ thread
http://forum.xda-developers.com/showthread.php?p=31911620
Look for a kernel for ICS, any of the version 3.99 should do. Choose the tar file to flash it via odin. After that try go into recovery again to see if it works.
Sent from my phone.
Click to expand...
Click to collapse
Thank u for the reply. I will try it. I will keep u updated!
forest1971 said:
I would first go to PhilZ thread
http://forum.xda-developers.com/showthread.php?p=31911620
Look for a kernel for ICS, any of the version 3.99 should do. Choose the tar file to flash it via odin. After that try go into recovery again to see if it works.
Sent from my phone.
Click to expand...
Click to collapse
I tryed it, and it didnt flash. this is what i got:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PhilZ-cwm6-XXLT5-OXX-5.03.0.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can u make anything of that?
It does not look good at all. I would try again with PhilZ 3.99 tar file.
Sent from my phone.
forest1971 said:
It does not look good at all. I would try again with PhilZ 3.99 tar file.
Sent from my phone.
Click to expand...
Click to collapse
Oke, so i un-installed kies, and un-installed the phone drives from my pc, then installed the drivers from the ''stock rom n7000'' post. i flashed the kernel again using odin for pc, gues what, it worked!
The booted up normaly and it also uses philz touch recovery normaly.
I installed the App root checker, and i have root acces.
Now i can just flash towards anything i want right? becuase i am now on a safe kernel?
Thanks alot for your help!
Good to know you can get back to safety. Yes. Just nees to read and follow rom installation guide carefully from respective rom that you want.
Sent from my phone.
forest1971 said:
Good to know you can get back to safety. Yes. Just nees to read and follow rom installation guide carefully from respective rom that you want.
Sent from my phone.
Click to expand...
Click to collapse
just flashed CM9.1 and its all good!!
I'm so happy, and my girlfriend says thanks!
ThaiDai said:
Download a stock Rom and try to install it with PC Odin.
If it stops with an error at factoryfs.img it is bricked.
If it succeeds you have a solid base for installing a Custom Rom (even if it is for your girl I wouldn't use a "costum" Rom).
Click to expand...
Click to collapse
thank u for your reply, but i fixed it whith the help of the other poster.
thanks again.
Flash cm 10.2, its newer & better
GT-N7000 cihazımdan Tapatalk 2 ile gönderildi
maktama said:
Flash cm 10.2, its newer & better
GT-N7000 cihazımdan Tapatalk 2 ile gönderildi
Click to expand...
Click to collapse
I will. Thanks.
Hi , i need a little advice on this n-7000 issue please, heres the background.
Bought phone from ebay£100 working fine with a german DBT rom installed( was a german phone as it was main language on reset)
Used fine for 3 weeks except buying better battery.
Flashed philz cwm6 5.08.5 giving me root and 6.0.3.3, alls well.
Tried to upgrade via odin to a 4.4 cwm but fails so i di it through a zip and starts bootloop, wipe reboot no good still the same.
Reload stock via odin, passes but still loops, efs error.
I had somehow wiped the efs folder and not knowing what an efs folder was didnt have a backup so after 9 hours of reading, flashing back to gb and then rooting to make sure the efs was empty via ktool and explorers it was off to samsung after a stock jb via odin to go back to bootloop.
Thankfully phones just in warranty so new pda and usb and they flash it with LT9XEU.
So i have it back root with Philz-cwm6-XXLT9-ORA-5.08.5-signed(does the orange make it an issue on an open device?)and it works fine and runs fine and i back up the efs folder to a million places with 3 different programs.
Problem i have is, i want a 4.4 rom like most people but i cannot get a cwm with selinux support to run on this phone...heres what i have tried,
Installing philz_touch_6.26.6-n7000 on top of the 1st cwm which gives me black screen after 1st logo not getting to samsung one, but if i boot straight into recovery it does tell me im on 6.0.4.8.
Tried to install philz_touch_6.26.6-n7000 from scratch but get error status 7 in /tmp/(cant remeber)/package.zip.
Tried to install raw_kernel_r4_j43 before asylum rom install but this failed on signature.
That was last night and i thought id ask before trying anything else.I have reflashed stock back on this 6-7 times in 24 hours trying to sort this but im going round in circles.
I can flash the rom in odin no problem but never a recovery file it fails everytime.
Is it as simple as you have to install the 4.4 rom after new cwm as the old jb cant handle it hence the black screen or is there something else i need to do, any help is most welcome as after avoiding a £200 repair bill for a £100 phone i continue with some trepidation, many thanks all.
What's the current situation? Are you able to get into recovery? If yes, what's the recovery?
The phone is running as normal, stock rom and recovery...left it like that after fresh install last night.
Running N7000XXLT9_N7000OXXLT3_XEU with its stock recovery
So if you want to install kitkat, flash Philz kernel first to get Cwm.. Then flash raw kernel.. Reboot into recovery and wipe and install kitkat rom.
Thank you, doing it in that order worked for me,so many threads its hard to find clarity...i thank you for your time.
working in my phone without any ERROR.
Flashing Philz fails
Kael ruch said:
working in my phone without any ERROR.
Click to expand...
Click to collapse
I am having a similar problem to Kael and could do with some help guys
This is my phone:
Model: GT-N7000
Android Version: 4.1.2 (stock rom)
Band Version: N7000XXLT3
Kernel Version: 3.0.31-1103517, [email protected]#3, SMP PREEMPT Tue Jun 4 20:55:52 KST 2013
Build Version: JZO54K.N7000XXLT9
Odin fails flashing philz_touch_6.12.8-n7000.tar with the following error
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.07.9-n7000.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> SingleDownload.
<ID:0/011> recovery.img
<ID:0/011> NAND Write Start!!
<ID:0/011> FAIL!
<ID:0/011>
<ID:0/011> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I am hoping to flash Kit Kat 4.4.4 via Omni ROM . To do this I believe I need to load a ClockworkMod-Recovery - WITH SELINUX SUPPORT which is why I am trying to flash philz_touch_6.12.8-n7000.tar.md5. It fails everytime. If I flash an older version of Philz I understand it won't be compatible with Kit Kat 4.4.4. Is that correct?
Any suggestions would be appreciated
Flash Raw4 kernel, reboot recovery again, do all wipes and format and flash 4.5.x Rom and GApps...
User_99 said:
Flash Raw4 kernel, reboot recovery again, do all wipes and format and flash 4.5.x Rom and GApps...
Click to expand...
Click to collapse
Thanks very much for your help.
I am fairly new to all this and a bit nervous about screwing up and bricking my phone. However, the fact that your reply is succinct, gives me confidence that you advised on this problem before and your method works. I don't understand everything you have listed but I am sure I can find the answers to all I need in this forum.
A couple of things
1) A Raw5 or 6 kernel is available, should i go for one of these. http://forum.xda-developers.com/showthread.php?t=2397000.
2) At what point do I backup so I can recover if things go wrong and how would I do this backup. My phone is not rooted yet.
I appreciate your time. Thank you.
The instructions I was originally trying to follow were these.... http://forum.xda-developers.com/showthread.php?t=2780703
2. Installation procedures
If you are on the stock Jelly Bean/ICS Samsung firmware:
-Download Philz kernel and copy it to your SD card
-Download a KitKat ROM and copy it to either your internal or external memory
-Download PA-Google Apps and copy it to either your internal or external memory
-Download Raw Kernel r5 and copy it to either your internal or external memory
-Reboot to recovery by holding down volume up, power and home button at once until you are in recovery mode
-Flash Philz kernel
-Go to "Mounts and Storage" and format /system, /data, /preload
-Reboot to recovery again by going to "advanced", "reboot to recovery" or by holding down volume up, power and home button at once until you are back in recovery mode
-Flash Raw Kernel
-Reboot to recovery again
-Flash your ROM
-Flash PA-Google Apps
-Reboot
You have a XXLT9 Rom so search in PhilZ Thread for such a Kernel. You can also use a similar one like lt6, lt4, lta. With this Kernel you can root your phone and get a custom recovery in one step. Now you can make a nandroid of your current rom.
Now time for kk. Flash Raw4/5 Kernel and follow the instructions you wrote.
If you want to go back flash Philz Kermel and after thst recover your nandroid backup of your stock rom.
User_99 said:
You have a XXLT9 Rom so search in PhilZ Thread for such a Kernel. You can also use a similar one like lt6, lt4, lta. With this Kernel you can root your phone and get a custom recovery in one step. Now you can make a nandroid of your current rom.
Now time for kk. Flash Raw4/5 Kernel and follow the instructions you wrote.
If you want to go back flash Philz Kermel and after that recover your nandroid backup of your stock rom.
Click to expand...
Click to collapse
Thanks for your last reply. This all makes sense to me now.
I have found a PhilZ-cwm6-XXLT9-ORA-5.08.5-signed.zip file so I reckon I'm ready to go with these instructions.
Take care and cheers.... John
Should work and good luck...
[Q&A] [TOOL/UTILITY][TWRP][2.8][RECOVERY] TWRP 2.8.1.1 TeamWin Recovery Project 10/2
Q&A for [TOOL/UTILITY][TWRP][2.8][RECOVERY] TWRP 2.8.1.1 TeamWin Recovery Project 10/24
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [TOOL/UTILITY][TWRP][2.8][RECOVERY] TWRP 2.8.1.1 TeamWin Recovery Project 10/24. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Problem Flashing TWRP to T-Mobile Note 4 in ODIN...PLZ HELP
I am trying to flash TWRP to my Note 4 for T-Mobile via ODIN 3.09 & 3.07 with no luck at all. I have downloaded many different files for TWRP for T-mobile's Note 4 but none of them work at all I keep getting the same error message from Odin. PLEASE some1 HELP me I have never had this issue before with Samsung phones until now and I am completly lost on what to do to get it to work. . Here is the message I get when I try to flash using Odin 3.09 or 3.07:
<ID:0/012> Initialzation...
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> recovery.img
<ID:0/012> NAND Write Start!!
<ID:0/012> FAIL! (Auth)
<OSM> All threads completed. (succeed 0/ failed 1)
I have Auto Reboot & F . Rest Time checked everything else is unchecked.
openrecovery-twrp-2.8.1.0-trltetmo.img.tar is the file I have to flash.
PLEASE PLEASE PLEASE some1 help me get this to work PLEASE.
Ttw626 said:
I am trying to flash TWRP to my Note 4 for T-Mobile via ODIN 3.09 & 3.07 with no luck at all. I have downloaded many different files for TWRP for T-mobile's Note 4 but none of them work at all I keep getting the same error message from Odin. PLEASE some1 HELP me I have never had this issue before with Samsung phones until now and I am completly lost on what to do to get it to work. . Here is the message I get when I try to flash using Odin 3.09 or 3.07:
<ID:0/012> Initialzation...
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> recovery.img
<ID:0/012> NAND Write Start!!
<ID:0/012> FAIL! (Auth)
<OSM> All threads completed. (succeed 0/ failed 1)
I have Auto Reboot & F . Rest Time checked everything else is unchecked.
openrecovery-twrp-2.8.1.0-trltetmo.img.tar is the file I have to flash.
PLEASE PLEASE PLEASE some1 help me get this to work PLEASE.
Click to expand...
Click to collapse
Can you try verifying the md5 of the file from the place you downloaded TWRP from?
How do I verify it
re: odin flash issues
Ttw626 said:
I am trying to flash TWRP to my Note 4 for T-Mobile via ODIN 3.09 & 3.07 with no luck at all. I have downloaded many different files for TWRP for T-mobile's Note 4 but none of them work at all I keep getting the same error message from Odin. PLEASE some1 HELP me I have never had this issue before with Samsung phones until now and I am completly lost on what to do to get it to work. . Here is the message I get when I try to flash using Odin 3.09 or 3.07:
<ID:0/012> Initialzation...
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> recovery.img
<ID:0/012> NAND Write Start!!
<ID:0/012> FAIL! (Auth)
<OSM> All threads completed. (succeed 0/ failed 1)
I have Auto Reboot & F . Rest Time checked everything else is unchecked.
openrecovery-twrp-2.8.1.0-trltetmo.img.tar is the file I have to flash.
PLEASE PLEASE PLEASE some1 help me get this to work PLEASE.
Click to expand...
Click to collapse
Be sure that the "Reactivation lock" in settings>security is Unchecked
and be sure that you have USB debugging enabled before odin flashing.
After doing that you should no longer have odin flashing errors or issues.
Good luck!
bigbiff said:
Can you try verifying the md5 of the file from the place you downloaded TWRP from?
Click to expand...
Click to collapse
How do I verify it?
---------- Post added at 02:25 PM ---------- Previous post was at 02:13 PM ----------
Misterjunky said:
Be sure that the "Reactivation lock" in settings>security is Unchecked
and be sure that you have USB debugging enabled before odin flashing.
After doing that you should no longer have odin flashing errors or issues.
Good luck!
Click to expand...
Click to collapse
Misterjunky i think relock is on in the phone ill disable it and try again i didnt think of that before thanks.
Misterjunky said:
Be sure that the "Reactivation lock" in settings>security is Unchecked
and be sure that you have USB debugging enabled before odin flashing.
After doing that you should no longer have odin flashing errors or issues.
Good luck!
Click to expand...
Click to collapse
Great it took this time thanks alot sir :good:
@bigbiff...VZW Note 4 stock recovery image is here....
http://forum.xda-developers.com/showthread.php?p=56385923
Sent from my HTC Rezound / ADR6425LVW using Tapatalk v2.4.13
nicee 5*
I accidentally wiped my sd card in twrp and now I'm having trouble downloading from a lot of apps. How can I fix this? Would I have to Odin back to a stock firmware to get it back to where it was? Titanium back up and other apps say I have insufficient space, but I know I have a good amount. I reflashed the ROM I've been on and started fresh, but I'm still having issues. Thanks in advanced.
re: titanium backup
paranoid android85 said:
I accidentally wiped my sd card in twrp and now I'm having trouble downloading from a lot of apps. How can I fix this? Would I have to Odin back to a stock firmware to get it back to where it was? Titanium back up and other apps say I have insufficient space, but I know I have a good amount. I reflashed the ROM I've been on and started fresh, but I'm still having issues. Thanks in advanced.
Click to expand...
Click to collapse
Uninstall titanium backup and re-download/install it from the play store then have titanium backup
detect backup location under preferences>backup location in settings then restart titanium backup.
Once you do that it will work fine.
Good luck!
TWRP 2.8.1.0 is not installing on my Tmo Galaxy Note 4
I don't know what's going on guys. I know I am doing everything the right way but for some reason whenever i get back to turning the phone off hitting Vol up/Home/ Power key it takes me to the android boot screen vs the twrp android boot screen.
I am using the img.tar file in odin under the pda option
I have odin set to auto re-boot
i turn the phone off and hit the command
nothing.
Using this twrp in odin
openrecovery-twrp-2.8.4.0-trltetmo.img.tar
if someone can please help me out greatly appreciated.
Is the phone rooted? With bootloader unlocked? Did u use CF auto root?
If so u can flash recovery with FLASHIFY [ https://play.google.com/store/apps/details?id=com.cgollner.flashify] from the play store. Just download the .IMG file for TWRP in the app and let it flash it.
Sent from my SM-N910T using XDA Free mobile app
Thanks for your help man I did end up figuring it out. For some reason the auto reboot was causing the issue. I had to turn that off and manually pull the battery out etc for it to work.
Worked great and I'm now running cm12
thanks for this
I'm guessing twrp 3.0.0 dosent work for the kindle fire (otter) right?
AlbGol said:
I gave you the correct file for what you need to do if you have the n910t, for more specifics look the post above me.
Here is the correct way of installing twrp 3.0 image file, straight from your existing recovery (twrp)
When you boot into your current Recovery 2.8.7.0 and click on Install - Bottom Right you'll see a Image Button - Click on this - The next Screen will show Boot and Recovery - You want to click on Recovery and Swipe to install.
Thats it. (All the phones that I did this were N910T, so was the image file for my device trltmo)
Here is the direct link for twrp 3.0 image file for 910t
https://www.androidfilehost.com/?fid=24407100847294047
Also if u have different model(carrier) just find it here and follow the steps:
http://forum.xda-developers.com/not...-utility-twrp-2-8-1-0-teamwin-t2915588/page44
Click to expand...
Click to collapse
Hey, HUGE problem here. I did this I may have totally bricked my phone. im freaking out.
Please help me
Stuck on recovery booting and cannot even get into download mode. Plugged into comp, I do get a chime .
Is it time to Jtag?
What are my options. Please help
Remove battery, install battery...use button combo to enter download mode and flash 2.87 with odin...
Sent from my SM-N910V / VZW Note 4 DE / Factory Bootloader Unlocked / Rooted / Custom Kernel-ed/ TWRP 3.0.0-0.trltevzw
manbat said:
Remove battery, install battery...use button combo to enter download mode and flash 2.87 with odin...
Sent from my SM-N910V / VZW Note 4 DE / Factory Bootloader Unlocked / Rooted / Custom Kernel-ed/ TWRP 3.0.0-0.trltevzw
Click to expand...
Click to collapse
Button combo does not work, goes to recovery booting loop. This is the problem. That's the first thing i did. I haven't seen a hard brick on any of my devices in 12 years.