Hi,
i realy need your help with rooting of my device Samsung galaxy s 3 mini GT-i8190N.
I use this thread for root: http://forum.xda-developers.com/showthread.php?t=2030282
Problem is when i start with odin then it writte:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I8190XXAMG1_I8190OXXAMG1_HOME_ROOTED.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.img
<ID:0/007> NAND Write Start!!
<ID:0/007> cache.img
<ID:0/007> hidden.img
<ID:0/007> modem.bin
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<ID:0/007> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
What i can do next? Please help me someone!!!
try this:
download both files, then:
flash the md5 as pda in odin, then copy the zip to internal memory, reboot and use cwm to apply it.
https://copy.com/rnnnLYvwfZKI
https://copy.com/NrS4O7kU04ma
press thanks if i helped!
It fail because you're trying to flash a i8190 modem to a i8190N.
Download a pre rooted ROM for i8190N, or flash only custom recovery and SuperSU.zip.
Sent through time and space from my s3mini/CM11
tys0n said:
It fail because you're trying to flash a i8190 modem to a i8190N.
Download a pre rooted ROM for i8190N, or flash only custom recovery and SuperSU.zip.
Sent through time and space from my s3mini/CM11
Click to expand...
Click to collapse
thats what i said, and i even posted links!
Kobro said:
thats what i said, and i even posted links!
Click to expand...
Click to collapse
Yes you did. I just added an explanation to why it failed.
Sent through time and space from my s3mini/CM11
Related
Dear all,
I found a new firmware on sammobile site and thought to upgrade my Galaxy note from:
N7000JPLPD_N7000OJPLP7_N7000XXLPT_HOME.tar.md5
to:
N7000JPLR8_N7000OJPLR8_N7000XXLRK_HOME.tar.md5
(Both of them for Pakistan)
First I used Odin 1.83 to flash but after about 20% the Odin turned red indicating 'Fail'
Then I searched the web and (I know it's my fault) somewhere downloaded Odin 1.85, checked all the fields on Odin, like "Re Partition- Autoboot-F reset time"
I check them all and then another mistake.... used the same MD5 file in all 3 'PDA, PHONE, CSC" and flashed again.
And also used the PIT file which was in the Odin 1.85's folder.
Now I can enter the download mode but if I try to flash the new ROM, it goes upto 20% and says something like this:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000JPLR8_N7000OJPLR8_N7000XXLRK_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> hidden.img
<ID:0/009> NAND Write Start!!
<ID:0/009> factoryfs.img
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And If I flash the older ROM it says like:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000JPLPD_N7000OJPLP7_N7000XXLPT_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> cache.img
<ID:0/008> NAND Write Start!!
<ID:0/008> factoryfs.img
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please help
sulemani1 said:
Dear all,
I found a new firmware on sammobile site and thought to upgrade my Galaxy note from:
N7000JPLPD_N7000OJPLP7_N7000XXLPT_HOME.tar.md5
to:
N7000JPLR8_N7000OJPLR8_N7000XXLRK_HOME.tar.md5
(Both of them for Pakistan)
First I used Odin 1.83 to flash but after about 20% the Odin turned red indicating 'Fail'
Then I searched the web and (I know it's my fault) somewhere downloaded Odin 1.85, checked all the fields on Odin, like "Re Partition- Autoboot-F reset time"
I check them all and then another mistake.... used the same MD5 file in all 3 'PDA, PHONE, CSC" and flashed again.
And also used the PIT file which was in the Odin 1.85's folder.
Now I can enter the download mode but if I try to flash the new ROM, it goes upto 20% and says something like this:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000JPLR8_N7000OJPLR8_N7000XXLRK_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> hidden.img
<ID:0/009> NAND Write Start!!
<ID:0/009> factoryfs.img
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And If I flash the older ROM it says like:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000JPLPD_N7000OJPLP7_N7000XXLPT_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> cache.img
<ID:0/008> NAND Write Start!!
<ID:0/008> factoryfs.img
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please help
Click to expand...
Click to collapse
Hi friend just try flashing to GB and then to any other.
Use company cable for data transfer, try with another usb port and i hope it must get cleared.
Press THANKS if it helped you
Thank you my friend, but could you guide me where to find GB? And what GB actually is? The older 2.3.6 Ginger bread?
sulemani1 said:
Thank you my friend, but could you guide me where to find GB? And what GB actually is? The older 2.3.6 Ginger bread?
Click to expand...
Click to collapse
GB actually is the older 2.3.6 Ginger
you find GB in sammobile site
If it's failing at factory.fs then you could be in longer term trouble, let us know.
Sent from my GT-N7000 using xda premium
dude... try this,,
just pull out the battery. wait for 10 secs.. reinsert. go back to download mode.. use odin 1.85 and just select the tar.md5 fine in pda section.. donot check repartion.. dont use pit file.
PS: if odin is stuck once.. u cannot continue from there.. the phone needs a reboot for another try
I read somewhere saying that flashing pit file must be accompanied by bootloader or your device might brick.
Sent from my GT-N7000 using xda premium
nokiamodeln91 said:
dude... try this,,
just pull out the battery. wait for 10 secs.. reinsert. go back to download mode.. use odin 1.85 and just select the tar.md5 fine in pda section.. donot check repartion.. dont use pit file.
PS: if odin is stuck once.. u cannot continue from there.. the phone needs a reboot for another try
Click to expand...
Click to collapse
Thanks friend.
I did it. Im ok now.
Thanks to all of you who helped me here.
I've gt-s5830 galaxy ace
i need the software from sam mobile gt-s5830okaegy
but hotfile site doesn't work with me
any upload site instead?
HOSNY_MH said:
I've gt-s5830 galaxy ace
i need the software from sam mobile gt-s5830okaegy
but hotfile site doesn't work with me
any upload site instead?
Click to expand...
Click to collapse
what exactly do you want brother please mention something then i will see if i could help you
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100GXXLSR_I9100GXXLSP_I9100GXEFLSR_HOM E.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> cache.img
<ID:0/004> NAND Write Start!!
<ID:0/004> factoryfs.img
<ID:0/004> hidden.img
<ID:0/004> MLO
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
HOSNY_MH said:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100GXXLSR_I9100GXXLSP_I9100GXEFLSR_HOM E.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> cache.img
<ID:0/004> NAND Write Start!!
<ID:0/004> factoryfs.img
<ID:0/004> hidden.img
<ID:0/004> MLO
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
ummm...
Hi HOSNY_MH... where are you from? or where is the request rom from?
AFAIK I9100G = Galaxy S II
What do you need? why do yo want a galaxy ace rom and then post a galaxy s2 failed flash process? Did you mean that you need a Galaxy S2 rom?
i'm from egypt
how to flash rom
how to root
You can see "How to root-unroot galaxy ace" thread in general of galaxy ace...
Sent from my GT-S5830 using xda premium
HOSNY_MH said:
i'm from egypt
how to flash rom
how to root
Click to expand...
Click to collapse
Here it's a great Q&A Thead you could find
1. How to root and how to install CWM
2. How to flash any rom using Odin
3. Usefull tricks and answers
forum.xda-developers.com/showthread.php?p=42309905
Here hubix guide (how to flash a rom via Odin) where you can get drivers, the correct Odin version for Ace 4.38
forum.xda-developers.com/showthread.php?t=1034145?
And here the official website where you can get official firmwares for your Ace (choose your country if you want, but it's not neccessary )
www.sammobile.com/firmwares/1/?model=GT-S5830&pcode=0#firmware
PD: After flashing a fresh stock using Odin, reboot into recovery and do wipe data/factory reset and wipe cache partition in order to skip the bootloop (just in case )
Boot into recovery mode: HOLD HOME + POWER BUTTON UNTIL YOUR MOBILE BOOTS INTO RECOVERY
I've come across various other threads concerning this topic with other devices, but none are exactly like my issue.
I rooted originally with Odin and CF autoroot with no issues. Now me being the noob that I am, I un-rooted with Kies to check for any updates. The process went fine, however my device status still says "custom" and I'm unable to re-root using the same method that I did before. I get a "fail" in Odin after the cache.img process and have to remove the battery to reboot device.
Has anyone had this issue or am I the only idiot to unroot this beast of a phone?
Best bet. Odin back to stock and then reroot and forget about updates.
BAD ASS NOTE 4 + BAD ASS GEAR S
I just tried that. Downloaded the firmware from sammobile and used Odin to install it. Then proceeded to re-root using CF autoroot again. Same "fail" message.
my Odin is as follows:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-trltetmo-trltetmo-smn910t.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img.ext4
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
where's the issue?
I'd try a different version of Odin.
Razorfengraul said:
I just tried that. Downloaded the firmware from sammobile and used Odin to install it. Then proceeded to re-root using CF autoroot again. Same "fail" message.
my Odin is as follows:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-trltetmo-trltetmo-smn910t.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img.ext4
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
where's the issue?
Click to expand...
Click to collapse
As said diff version or bad cf autoroot download. It can be many things. Try a fresh download of everything. Also when u Odin back to stock it went fine so it is something after. Bad download
BAD ASS NOTE 4 + BAD ASS GEAR S
Hi everyone,
I bought a new samsung s6 and rooted it using pingpong, now i must unroot it so i can install the new update, well i downloaded the firmware stock odin 3.10, but everytime i try unrooting it usin odin i have this message
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925FXXU1AOCV_G925FH3G1AOC1_G925FXXU1AOCW_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My samsung is a G920F
firmware i trying to use is G925FXXU1AOCV_G925FH3G1AOC1_G925FXXU1AOCW_HOME.tar.md5
im so desesperate i tried so many time but no changing at all can someone help Me please
Thanks
Must use Odin v3.10.6
Neostatic17 said:
Hi everyone,
I bought a new samsung s6 and rooted it using pingpong, now i must unroot it so i can install the new update, well i downloaded the firmware stock odin 3.10, but everytime i try unrooting it usin odin i have this message
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925FXXU1AOCV_G925FH3G1AOC1_G925FXXU1AOCW_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My samsung is a G920F
firmware i trying to use is G925FXXU1AOCV_G925FH3G1AOC1_G925FXXU1AOCW_HOME.tar.md5
im so desesperate i tried so many time but no changing at all can someone help Me please
Thanks
Click to expand...
Click to collapse
wp4jot said:
Must use Odin v3.10.6
Click to expand...
Click to collapse
Hi wp4jot,
i have used odin 3.10.6 but it still don't work do you have an idea why its not working , or how can i solve this problem
Thanks
I don't. Did you flash all 4 files at once?
Neostatic17 said:
Hi wp4jot,
i have used odin 3.10.6 but it still don't work do you have an idea why its not working , or how can i solve this problem
Thanks
Click to expand...
Click to collapse
I had this problem.. You must have v3.10.6 and flash every file in the corresponding place, after that I still got a fail message but I tried un-checking the auto reboot option and that did the trick (this will make the phone stay in download mode even after you complete the flash, to quit download mode you must press the volume down button and the power button at the same time for about 10 seconds) hope that helps, let me know.
vontokkerths said:
I had this problem.. You must have v3.10.6 and flash every file in the corresponding place, after that I still got a fail message but I tried un-checking the auto reboot option and that did the trick (this will make the phone stay in download mode even after you complete the flash, to quit download mode you must press the volume down button and the power button at the same time for about 10 seconds) hope that helps, let me know.
Click to expand...
Click to collapse
I Have the same problem with S6- SMG20T (Dutch) Now trying to un-check the auto reboot otion. Hope it works for me.
didn't worked for me
wp4jot said:
I don't. Did you flash all 4 files at once?
Click to expand...
Click to collapse
What do you mean with that? witch 4 files?
Hope you can help me.
After a factory swipe and installing vodafone wallet on my S6 it says that it doesn't work on a rooted Phone
You have to put each file in the corresponding place, when you download the stock rom after you've extracted the zip you're supposed to have a file called AP, BL, CSC, AND the other which I cannot remember, those are the files you're supposed to flash, if you try to flash just AP like on the screenshot it's not going to work.
Neostatic17 said:
Hi everyone,
I bought a new samsung s6 and rooted it using pingpong, now i must unroot it so i can install the new update, well i downloaded the firmware stock odin 3.10, but everytime i try unrooting it usin odin i have this message
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925FXXU1AOCV_G925FH3G1AOC1_G925FXXU1AOCW_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My samsung is a G920F
firmware i trying to use is G925FXXU1AOCV_G925FH3G1AOC1_G925FXXU1AOCW_HOME.tar.md5
im so desesperate i tried so many time but no changing at all can someone help Me please
Thanks
Click to expand...
Click to collapse
I think you downloaded the wrong firmware for your phone, your phone is G920F and the firmware you are trying to flash is G925F.
@Neostatic17, it looks like you downloaded the wrong file. The file should be a tar.zip, not tar.md5. Once you download the correct tar.zip, extract the file and you will see 4 files within the one file you downloaded. Then flash all 4 files with odin.
Edit...Ok, I've checked my pc and the file is a tar.zip before you extract it and once it's extracted, there are 4 tar.md5 files. All you have to do is put the AP file in the AP slot, BL file in the BL slot and so on. I leave auto reboot checked, but that is up to you.
I have the SM-G920T S6 and I recently tried to install twrp and root using this guide: http://forum.xda-developers.com/tmo...l/how-to-flash-marshmallow-update-sm-t3362983. I have always used a nexus device so I am not familiar with odin, but I thought I had it figured out. In odin it says the recovery flash was successful and gave me a PASS message. Once I tried rebooting to recovery it was still the stock recovery and no twrp. I have gone back over the instructions, but I still get the same results. I have checked and my system is now marked as custom but Knox is not tripped. Any help would be appreciated.
You are really close. I had similar trouble flashing twrp o. My G920T. I got it to work flash with Odin using twrp by idlekernel. Here is the link download the version to flash with odin under AP or PDA.
I hope this helps.
RedZaton said:
You are really close. I had similar trouble flashing twrp o. My G920T. I got it to work flash with Odin using twrp by idlekernel. Here is the link download the version to flash with odin under AP or PDA.
I hope this helps.
Click to expand...
Click to collapse
Thank you. Which of those md5 files should I download?
I installed "twrp-3.0.2-2-zeroflte.tar.md5" via Odin.
RedZaton said:
I installed "twrp-3.0.2-2-zeroflte.tar.md5" via Odin.
Click to expand...
Click to collapse
I tried it again and it still does not do anything. I unchecked auto reboot and noticed that it still had the download bar up like it did not finish but even after 15 min the bar stayed.
Odin says this when I flash the image:
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
trixter29 said:
I tried it again and it still does not do anything. I unchecked auto reboot and noticed that it still had the download bar up like it did not finish but even after 15 min the bar stayed.
Odin says this when I flash the image:
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
Make sure auto reboot is unchecked in Odin, flash Twrp and boot directly into it after flash. It should work just fine with MM.