m7spr VS. m7wls - Sprint HTC One (M7)

Hello,
I have just gotten a new HTC One to play with and I'm a Sprint customer. Similar naming schemes leads me to believe the correct ROM would be the M7SPR roms...especially since this is the only thread I can find for a Sprint HTC One....however, the one I installed does not appear to work for my phone and leads to believe I actually need m7WLS Roms. I do not see any such ROMS in this forum. Can anyone point me in the right direction? Thanks!

http://forum.xda-developers.com/showthread.php?t=2712250
Sent from my HTCONE using Tapatalk

olorolo said:
http://forum.xda-developers.com/showthread.php?t=2712250
Sent from my HTCONE using Tapatalk
Click to expand...
Click to collapse
Hey, thanks bud. Giving this one a shot as soon as the download finishes. Do you by chance know what the difference in the two phones is? I see this ROM was located in this same section of the forums so I guess I just need to weed through all the m7spr's as I look here for the m7wls ROMS...
Thanks again for the help.^^

You should figure out how to check what your CID is, or just figure out what type of HTC one you have.
We need more info about your device.
Most roms are ports or modded from the international version then optimized for us Sprint/cdmA users.

slimbrady said:
Hello,
I have just gotten a new HTC One to play with and I'm a Sprint customer. Similar naming schemes leads me to believe the correct ROM would be the M7SPR roms...especially since this is the only thread I can find for a Sprint HTC One....however, the one I installed does not appear to work for my phone and leads to believe I actually need m7WLS Roms. I do not see any such ROMS in this forum. Can anyone point me in the right direction? Thanks!
Click to expand...
Click to collapse
You need to be rooted with a custom recovery also to flash custom roms, getting s-offed is another thing you should have.
Sent from my HTCONE using Tapatalk

olorolo said:
You need to be rooted with a custom recovery also to flash custom roms, getting s-offed is another thing you should have.
Sent from my HTCONE using Tapatalk
Click to expand...
Click to collapse
Ok thanks guys...my device is the Beats Audio version of the HTC One..idk if that helps..says model PN07200 in small print on the back of it...that 6.0 sense rom for wls doesn't seem to be working for me as my mobile network wouldn't come up and constant FC's, bootloop after restart. I definitely have rooted this phone and am using a version of TWRP with full SELinux support but I'm not sure about the S-Off thing...could that be the problem for me? Just tried reinstalling the rom so I'll try to get more information when it finishes booting..

slimbrady said:
Hey, thanks bud. Giving this one a shot as soon as the download finishes. Do you by chance know what the difference in the two phones is? I see this ROM was located in this same section of the forums so I guess I just need to weed through all the m7spr's as I look here for the m7wls ROMS...
Thanks again for the help.^^
Click to expand...
Click to collapse
spr and wls are the same. Naming convention was changed at some point from wls to spr.

raptoro07 said:
spr and wls are the same. Naming convention was changed at some point from wls to spr.
Click to expand...
Click to collapse
Ah ok...what led me to believe they were different devices was that I had a Viper Rom installed and tried to update it OTA and the viper update tool said "incompatible m7spr ROM installed and m7wls device!"
This Nuisense ROM keeps randomly restarting on me but I am trying to get more info via settings > about phone if I can get to it...

slimbrady said:
Ah ok...what led me to believe they were different devices was that I had a Viper Rom installed and tried to update it OTA and the viper update tool said "incompatible m7spr ROM installed and m7wls device!"
This Nuisense ROM keeps randomly restarting on me but I am trying to get more info via settings > about phone if I can get to it...
Click to expand...
Click to collapse
Nuisense is nice but you have to let it keep rebooting about 5 times and settle and it'll be good. As far as Viper Rom it could be the installation script has not been updated, or perhaps you are using an old recovery that is not recognizing the difference.

v1ral said:
You should figure out how to check what your CID is, or just figure out what type of HTC one you have.
We need more info about your device.
Most roms are ports or modded from the international version then optimized for us Sprint/cdmA users.
Click to expand...
Click to collapse
OK so finally got the rom to finish rebooting itself(10-15 reboots later lol) and have some more information about it:
Hardware Version:
0004
Processor:
Qualcomm Snapdragon 600 Quad-Core
Memory:
2gb
Display:
4.7 in 1080p
Camera:
HTC UltraPixel w/2.1m front camera
Bluetooth:
4.0
Model Number:
HTC PN072
I could get more software information but that won't really tell us much if I've installed software not meant for the phone by accident, right?
Is this enough information to determine the One that I have?

slimbrady said:
OK so finally got the rom to finish rebooting itself(10-15 reboots later lol) and have some more information about it:
Hardware Version:
0004
Processor:
Qualcomm Snapdragon 600 Quad-Core
Memory:
2gb
Display:
4.7 in 1080p
Camera:
HTC UltraPixel w/2.1m front camera
Bluetooth:
4.0
Model Number:
HTC PN072
I could get more software information but that won't really tell us much if I've installed software not meant for the phone by accident, right?
Is this enough information to determine the One that I have?
Click to expand...
Click to collapse
It's the right one
Sent from my HTCONE using Tapatalk

olorolo said:
It's the right one
Sent from my HTCONE using Tapatalk
Click to expand...
Click to collapse
Just making sure.....so that means I can use the spr ROMs as well? Or am I limited to the wls ROMs?
I would normally just try it but I actually have this phone now because I ruined my Photon Q by somehow erasing its ESN and MEID from a bad flash (i guess) so I'm a little paranoid now, lol.

Yes any of those
Sent from my HTCONE using Tapatalk

I don't understand that answer. Maybe I need to read more, but so far, it clarifies absolutely NITHING
And question was not clear about anything.
Sent from my HTCONE using XDA Premium 4 mobile app

i am also in the same situation . its keep rebooting
This is my phone data
C:\Users\vkfreeman\Desktop\HTCOneRoot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.00.000.0
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: SPCS_001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3831mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.090s
Anybody tell me which rom i can use ?
scottspa74 said:
I don't understand that answer. Maybe I need to read more, but so far, it clarifies absolutely NITHING
And question was not clear about anything.
Sent from my HTCONE using XDA Premium 4 mobile app
Click to expand...
Click to collapse

vkfreeman said:
This is my phone data
C:\Users\vkfreeman\Desktop\HTCOneRoot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.00.000.0
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: SPCS_001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3831mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.090s
Anybody tell me which rom i can use ?
Click to expand...
Click to collapse
M7_wls is Sprint version.
Sent from my HTC One using Tapatalk

Related

[Q] Getting S-OFF with soju

Hey Guys,
I want to make my HTC ONE a Google Play Edtioin, so.I am currently trying to make my HTC ONE (international) S-Off with Soju. i hae USB- Debugging turned on, my Bottloader is unlocked and my phone is rooted.
Everytime i try to run soju i get this Erreor:
Checking for updates......
Test 1: Rebooting into bootloader
Waiting for fastboot (7/120)
Waiting
Test 2: Booting device
Waiting for ADB (16/120)
must ferment longer...
must sanitize, skunky rum is nasty
hold please..............................................
[------------------------------------------------------------]
Rebooting into bootloader (again)
Waiting for fastboot (7/120)
FATAL: Download updated package at www.rumrunner.us
Press ENTER to exit
Does anyone know how to fix this?
Fabivons said:
Hey Guys,
I want to make my HTC ONE a Google Play Edtioin, so.I am currently trying to make my HTC ONE (international) S-Off with Soju. i hae USB- Debugging turned on, my Bottloader is unlocked and my phone is rooted.
Everytime i try to run soju i get this Erreor:
Checking for updates......
Test 1: Rebooting into bootloader
Waiting for fastboot (7/120)
Waiting
Test 2: Booting device
Waiting for ADB (16/120)
must ferment longer...
must sanitize, skunky rum is nasty
hold please..............................................
[------------------------------------------------------------]
Rebooting into bootloader (again)
Waiting for fastboot (7/120)
FATAL: Download updated package at www.rumrunner.us
Press ENTER to exit
Does anyone know how to fix this?
Click to expand...
Click to collapse
just do what the output tells you to do!
Go to www.rumrunner.us and use the updated version.
LibertyMarine said:
just do what the output tells you to do!
Go to www.rumrunner.us and use the updated version.
Click to expand...
Click to collapse
Thanks for your reply!
I already have the newest version so that doesn't seem to be the problem :/
Fabivons said:
Thanks for your reply!
I already have the newest version so that doesn't seem to be the problem :/
Click to expand...
Click to collapse
hmm, what OS did you install? Try to install a 4.3 zip from here: http://android-revolution-hd.blogspot.ch/p/android-revolution-hd-mirror-site-var.html
And could you please provide a "fastboot getvar all"?
thanks
P.S.
Just in case you don't know... censor the IMEI and the build number... just everything that is unique on your phone!
LibertyMarine said:
hmm, what OS did you install? Try to install a 4.3 zip from here: http://android-revolution-hd.blogspot.ch/p/android-revolution-hd-mirror-site-var.html
And could you please provide a "fastboot getvar all"?
thanks
P.S.
Just in case you don't know... censor the IMEI and the build number... just everything that is unique on your phone!
Click to expand...
Click to collapse
I recently installed Android Revolution HD 41 and the ElementalX-m7-10.10.1 Kernel.
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.62.401.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: /
(bootloader) imei: /
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__102
(bootloader) battery-status: good
(bootloader) battery-voltage: 3941mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bb768ae1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Fabivons said:
I recently installed Android Revolution HD 41 and the ElementalX-m7-10.10.1 Kernel.
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.62.401.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: /
(bootloader) imei: /
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__102
(bootloader) battery-status: good
(bootloader) battery-voltage: 3941mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bb768ae1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
then I think you should try the STOCK 4.3 ROM... this should definitely work. I tested it twice.
http://www.androidrevolution.nl/downloader/download.php?file=One_3.62.401.1_odexed.zip
(Thanks @mike1986.)
Then download the newest version of rumrunner s off:
http://rumrunner.us/rumrunner_downloads/rumrunner_HTC_0.5.0.tgz
BUT carefully listen to the instructions on the site!
http://rumrunner.us/instructions/
Fabivons said:
I recently installed Android Revolution HD 41 and the ElementalX-m7-10.10.1 Kernel.
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-main: 3.62.401.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) product: m7_ul
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__102
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
LibertyMarine said:
then I think you should try the STOCK 4.3 ROM... this should definitely work. I tested it twice.
http://www.androidrevolution.nl/downloader/download.php?file=One_3.62.401.1_odexed.zip
(Thanks @mike1986.)
Then download the newest version of rumrunner s off:
http://rumrunner.us/rumrunner_downloads/rumrunner_HTC_0.5.0.tgz
BUT carefully listen to the instructions on the site!
http://rumrunner.us/instructions/
Click to expand...
Click to collapse
Sorry to bug in, but may I recommend ARHD 31.6 (already rooted and unsecured kernel): http://forum.xda-developers.com/showthread.php?t=2183023
nkk71 said:
Sorry to bug in, but may I recommend ARHD 31.6 (already rooted and unsecured kernel): http://forum.xda-developers.com/showthread.php?t=2183023
Click to expand...
Click to collapse
No problem... I tried this one too but none of the ARHD worked for me.. anyways... rumrunner roots and flashed a unsecured kernel..
LibertyMarine said:
No problem... I tried this one too but none of the ARHD worked for me.. anyways... rumrunner roots and flashed a unsecured kernel..
Click to expand...
Click to collapse
When you got s-off, were you using the universal tool, or the firmware specific tools? as far as i can see, the universal tool (unlike the specific versions), need root and unsecured kernel (which the previous fw specific packages did by themselves).
nkk71 said:
When you got s-off, were you using the universal tool, or the firmware specific tools? as far as i can see, the universal tool (unlike the specific versions), need root and unsecured kernel (which the previous fw specific packages did by themselves).
Click to expand...
Click to collapse
I used both... for the new phone I used a universal tool... but I didn't root the phone previously...
Where did you see that? I read again through the whole page and couldn't find a order to install supersu or/and a unsecured kernel...
Maybe we shouldn't discuss this in the thread... we're highjacking this thread^^ Anyways, would be interesting where you got this information form
LibertyMarine said:
I used both... for the new phone I used a universal tool... but I didn't root the phone previously...
Where did you see that? I read again through the whole page and couldn't find a order to install supersu or/and a unsecured kernel...
Maybe we shouldn't discuss this in the thread... we're highjacking this thread^^ Anyways, would be interesting where you got this information form
Click to expand...
Click to collapse
I think it's okay, as long as we don't go forty posts on it; i saw it on while using rumrunner 0.5.0, ........ "ERROR: looks device is not rooted AND lacks an unsecure kernel. su or Fu!!!"
in fact ROM was rooted (odexed), but stock kernel, after installing custom kernel it was ok.
nkk71 said:
I think it's okay, as long as we don't go forty posts on it; i saw it on while using rumrunner 0.5.0, ........ "ERROR: looks device is not rooted AND lacks an unsecure kernel. su or Fu!!!"
in fact ROM was rooted (odexed), but stock kernel, after installing custom kernel it was ok.
Click to expand...
Click to collapse
Hmm... that's weird^^ but to be sure, I'd also do what you recommend... I just didn't have this problem.. don't know why.. the One was just out of the box, unlocked.. not even rooted^^ don't know how this exactly happend. Maybe I was on a previous verison of rumrunner s off... but I am pretty sure it was one of the universal.. I'm gonna dig around in my logfiles.. I stored everything somewhere on my HD...
LibertyMarine said:
Hmm... that's weird^^ but to be sure, I'd also do what you recommend... I just didn't have this problem.. don't know why.. the One was just out of the box, unlocked.. not even rooted^^ don't know how this exactly happend. Maybe I was on a previous verison of rumrunner s off... but I am pretty sure it was one of the universal.. I'm gonna dig around in my logfiles.. I stored everything somewhere on my HD...
Click to expand...
Click to collapse
AFAIK, rooted rom should work, and unsecured kernel is only "preferred".
nkk71 said:
AFAIK, rooted rom should work, and unsecured kernel is only "preferred".
Click to expand...
Click to collapse
sorry, because of a lack of English knowledge, I didn't understand what you meant with this message. Sorry, could you please try to say it with different words ?
LibertyMarine said:
sorry, because of a lack of English knowledge, I didn't understand what you meant with this message. Sorry, could you please try to say it with different words ?
Click to expand...
Click to collapse
yes, sorry: as far as i know (AFAIK), when rumrunner switched from specific to universal, the first thing that was needed was a rooted rom, with an unsecured kernel "preferred, but not necessary",
now (as the number of devices, etc. have been added), rumrunner works best with a ROM compatible with firmware, also rooted and unsecured kernel (ie kernel with write-protection disabled)
nkk71 said:
yes, sorry: as far as i know (AFAIK), when rumrunner switched from specific to universal, the first thing that was needed was a rooted rom, with an unsecured kernel "preferred, but not necessary",
now (as the number of devices, etc. have been added), rumrunner works best with a ROM compatible with firmware, also rooted and unsecured kernel (ie kernel with write-protection disabled)
Click to expand...
Click to collapse
Aha, ok.. thanks! Thank you very much for updating my knowledge!
I'm on stock, rooted, custom recovery and HBoot 1.55... This is what I did....
http://forum.xda-developers.com/showthread.php?t=2606577
Sent from my LG-D803 using xda app-developers app
Thank you so far!
I am going to try it out!
But I have one more question.. is there a fix for the big black menue button which appears in the Google Play Edition?
Fabivons said:
Thank you so far!
I am going to try it out!
But I have one more question.. is there a fix for the big black menue button which appears in the Google Play Edition?
Click to expand...
Click to collapse
oh mate.. what luck that I randomly saw your post... otherwise noone would have seen it.. remember: If you want to have an answer, quote or the other person won't be notified! This is just the way this forum works.. I am sorry.
Yes there is a fix:
Download Xposed Installer and install it on your device. Then install the framework... and search in the store(the one in xposed) for 3dot menu Mod... install it and the 3dot menu is away! To get the 3dot menu working, i can recommand Gravity box which you can use to remap the softkeys(longpress, doublepress)...
Edit:
Xposed doesn't work on ART Engine at the moment! Only dalvik works. Running it on ART will lead into a bootloop... but Xposed know this and disables ART before you run into further errors
Fabivons said:
Thank you so far!
I am going to try it out!
But I have one more question.. is there a fix for the big black menue button which appears in the Google Play Edition?
Click to expand...
Click to collapse
is everything fine?

[Q] Not getting any signal

Hi, I have been reading this forum for 2 days straight trying everything and most of the things helped but now I am stuck.
My problem: I am trying to use the phone on Bell network. No signal, GSM status : Emergency Call Only. When I select Bell from network list it tells me that the SIM does not support the Network. If I put the same SIM in another phone it works and gets network.
My phone:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.28.3218.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.06.401.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: XXXXXXXXXX
(bootloader) imei: XXXXXXXXXXXXXXX
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3808mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-01dc707e
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Preffered Network Type : CDMA/EvDo/GSM/WCDMA/LTE auto
CWM: M7 TWRP Nandroid Backup CID BM___001 1.29.666.5
What I did:
1) Tried the tape method in case SIM card was not making proper contact with phone pins. (Than I realized that was nonesense since the phone was detecting my contacts...)
2) Flashed new firmware (6.06.401.1 came with radios nothing changed)
3) Installed the Bell Mobility Nandroid Backup (still nothing except I can now install the Bell applications from my SIM card)
I am looking for suggestions, ideas and possibly solutions. Any help is welcome!
Finxster
finxster said:
Hi, I have been reading this forum for 2 days straight trying everything and most of the things helped but now I am stuck.
My problem: I am trying to use the phone on Bell network. No signal, GSM status : Emergency Call Only. When I select Bell from network list it tells me that the SIM does not support the Network. If I put the same SIM in another phone it works and gets network.
My phone:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.28.3218.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.06.401.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: XXXXXXXXXX
(bootloader) imei: XXXXXXXXXXXXXXX
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3808mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-01dc707e
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Preffered Network Type : CDMA/EvDo/GSM/WCDMA/LTE auto
CWM: M7 TWRP Nandroid Backup CID BM___001 1.29.666.5
What I did:
1) Tried the tape method in case SIM card was not making proper contact with phone pins. (Than I realized that was nonesense since the phone was detecting my contacts...)
2) Flashed new firmware (6.06.401.1 came with radios nothing changed)
3) Installed the Bell Mobility Nandroid Backup (still nothing except I can now install the Bell applications from my SIM card)
I am looking for suggestions, ideas and possibly solutions. Any help is welcome!
Finxster
Click to expand...
Click to collapse
have you tried another sim in the HTC connected to a GSM network, I have a suspicious feeling you have a GSM phone there and Bell requires a CDMA phone, completely different partition layout.
Seanie280672 said:
have you tried another sim in the HTC connected to a GSM network, I have a suspicious feeling you have a GSM phone there and Bell requires a CDMA phone, completely different partition layout.
Click to expand...
Click to collapse
I tried Rogers SIM and it worked one shot.
finxster said:
I tried Rogers SIM and it worked one shot.
Click to expand...
Click to collapse
also, another thing ive noticed, is the firmware you flashed is a 401 firmware, thats WWE Europe, not 100% sure if that maybe at fault
I believe someone recently had success flashing developer edition firmware and RUU on their device and they were on Bell.
I'll see if I can find the thread, EDIT: http://forum.xda-developers.com/htc-one/help/dpes-developers-edition-canada-t2851008
Its got to worth a try, and easy to do as your s-off.
Seanie280672 said:
also, another thing ive noticed, is the firmware you flashed is a 401 firmware, thats WWE Europe, not 100% sure if that maybe at fault
I believe someone recently had success flashing developer edition firmware and RUU on their device and they were on Bell.
I'll see if I can find the thread, EDIT: http://forum.xda-developers.com/htc-one/help/dpes-developers-edition-canada-t2851008
Its got to worth a try, and easy to do as your s-off.
Click to expand...
Click to collapse
Oh dayum that was fast. I am going to try it now and get back to you with results.
Crossing fingers, toes and everything else....
dam harf to ttpe lije ths...
uncrossing fingers....
BRB
EDIT: Changed CID, MID is the same... downloading firmware
EDIT2: Flashed firmware downloading RUU
sidequestion: the RUU name is RUU M7 UL K44 SENSE55 MR BrightstarUS WWE 4.19.1540.9 Radio 4A.23.3263.28 10.38r.1157.04L Release 353887 Signed 3... wouldn't that also be Europe specific @Seanie280672?
Also, I see my HBOOT is now 1.56...
finxster said:
Oh dayum that was fast. I am going to try it now and get back to you with results.
Crossing fingers, toes and everything else....
dam harf to ttpe lije ths...
uncrossing fingers....
BRB
EDIT: Changed CID, MID is the same... downloading firmware
EDIT2: Flashed firmware downloading RUU
Click to expand...
Click to collapse
be sure to check the MD5 and file size of the RUU before flashing, and if the download is a little slow, you can try this link instead, same RUU:
http://androidruu.com/getdownload.p...8_10.38r.1157.04L_release_353887_signed_3.exe
no, WWE means world wide English.
Seanie280672 said:
be sure to check the MD5 and file size of the RUU before flashing
Click to expand...
Click to collapse
File size is 1.5 gb.... How do I check MD5?
finxster said:
File size is 1.5 gb.... How do I check MD5?
Click to expand...
Click to collapse
MD5 Check http://forum.xda-developers.com/showthread.php?t=1135620
i'll keep my fingers crossed for you :fingers-crossed:
Seanie280672 said:
i'll keep my fingers crossed for you :fingers-crossed:
Click to expand...
Click to collapse
They match!
noob question here... What is the command for fastboot to run an exe?
Nvm... >.> figured it out...
finxster said:
They match!
noob question here... What is the command for fastboot to run an exe?
Click to expand...
Click to collapse
there isn't one.
plug your phone into the computer and make sure it says fastboot USB on the screen, then double click the RUU.exe file and it will launch, follow the on screen instructions, flashing takes quite a while, about 10 mins I think mine took, and at points it will look like its stuck, not very reassuring I know, it got stuck at 5% for me and then suddenly jumped to 95%, then seemed to sit there forever until it finally completed.
EDIT: is your Bell sim still in the phone ?
@Seanie280672 Yep bell sim still in phone. Installing now
finxster said:
@Seanie280672 Yep bell sim still in phone. Installing now
Click to expand...
Click to collapse
good, because during set-up it should detect your sim and ask you to select your operator, im hoping Bell is in the list.
Seanie280672 said:
good, because during set-up it should detect your sim and ask you to select your operator, im hoping Bell is in the list.
Click to expand...
Click to collapse
It prepared installation and when I agreed and clicked next... it closed... I was running it as admin....
finxster said:
It prepared installation and when I agreed and clicked next... it closed... I was running it as admin....
Click to expand...
Click to collapse
damn, I had that problem once, its not the RUU at fault, its your computer, this is how I fixed it, its a bit long winded and you have to restart your computer after each installation, you need to install all of them one at a time, or you can try another computer if you have one available.
http://forums.androidcentral.com/ht...tall-4-3-ruu-windows-7-8-1-a.html#post3466555
I want to take a minute and thank you @Seanie280672!!! I am going to go ahead and try it... I do however have another pc next to me so I will try running the RUU from that one in the meanwhile.
finxster said:
I want to take a minute and thank you @Seanie280672!!! I am going to go ahead and try it... I do however have another pc next to me so I will try running the RUU from that one in the meanwhile.
Click to expand...
Click to collapse
your welcome, but don't thank me yet, its not worked yet, im just sharing my knowledge which ive learned from others on this great forum.
Seanie280672 said:
damn, I had that problem once, its not the RUU at fault, its your computer, this is how I fixed it, its a bit long winded and you have to restart your computer after each installation, you need to install all of them one at a time, or you can try another computer if you have one available.
http://forums.androidcentral.com/ht...tall-4-3-ruu-windows-7-8-1-a.html#post3466555
Click to expand...
Click to collapse
So, I got it to run on my main PC but there is a dialog box that makes me skip all the steps... will try on the laptop
Same on my laptop... ARUWizard Click here to next dialog... and I can't do anything else... clicking ok until the program is killed
finxster said:
So, I got it to run on my main PC but there is a dialog box that makes me skip all the steps... will try on the laptop
Same on my laptop... ARUWizard Click here to next dialog... and I can't do anything else... clicking ok until the program is killed
Click to expand...
Click to collapse
ive never seen that error before, but this would maybe explain it: http://www.solvusoft.com/en/files/e...windows/htc/rom-update-utility/aruwizard-exe/
http://forum.xda-developers.com/showthread.php?t=2666090
He has the same issue, however I am in bootloader fastboot usb mode... and still nothing... should I try RUU mode?
@Seanie280672
finxster said:
http://forum.xda-developers.com/showthread.php?t=2666090
He has the same issue, however I am in bootloader fastboot usb mode... and still nothing... should I try RUU mode?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=50739768&postcount=4

Why does my phone bootloop when I install a kernel?

I'm S-Off, running a rooted version of 4.4.3 with Sense 6.0. For whatever reason, I can't get kernels to work for me. I've tried ElementalX (specifically the Verizon version) as well as teaMSeven, and they both make my phone bootloop on the HTC Logo screen. Why is it doing this? Like I said, I'm S-off and rooted. I'm installing kernels that are listed as supporting my ROM. (stock, rooted 4.4.3) What the heck is the problem?
I have a Nandroid backup, so recovering my device isn't an issue. I'm just really aggravated that I'm not able to flash a different kernel.
DrFeelgood246 said:
I'm S-Off, running a rooted version of 4.4.3 with Sense 6.0. For whatever reason, I can't get kernels to work for me. I've tried ElementalX (specifically the Verizon version) as well as teaMSeven, and they both make my phone bootloop on the HTC Logo screen. Why is it doing this? Like I said, I'm S-off and rooted. I'm installing kernels that are listed as supporting my ROM. (stock, rooted 4.4.3) What the heck is the problem?
I have a Nandroid backup, so recovering my device isn't an issue. I'm just really aggravated that I'm not able to flash a different kernel.
Click to expand...
Click to collapse
So its safe to assume your phone is Verizon but Can you please post a getvar all.
As far as I can see the Verizon Elemental x Kernel only supports 4.4.2 Sense 5.5 so that's probably your issue. Can you provide a link to the Kernel your trying to flash.
If you found my posts helpful, no need to say thanks. There's a button for that
Danny201281 said:
So its safe to assume your phone is Verizon but Can you please post a getvar all.
As far as I can see the Verizon Elemental x Kernel only supports 4.4.2 Sense 5.5 so that's probably your issue. Can you provide a link to the Kernel your trying to flash.
If you found my posts helpful, no need to say thanks. There's a button for that
Click to expand...
Click to collapse
Okay, I think you're right about Elementalx. However, the teaMSeven Kernel says it works with Sense 6/Android 4.4.3, so I'm really confused about that one. How do I obtain my phone's getvar?
DrFeelgood246 said:
Okay, I think you're right about Elementalx. However, the teaMSeven Kernel says it works with Sense 6/Android 4.4.3, so I'm really confused about that one. How do I obtain my phone's getvar?
Click to expand...
Click to collapse
reboot in bootloader/fastboot mode:
Code:
fastboot getvar all
DrFeelgood246 said:
Okay, I think you're right about Elementalx. However, the teaMSeven Kernel says it works with Sense 6/Android 4.4.3, so I'm really confused about that one. How do I obtain my phone's getvar?
Click to expand...
Click to collapse
Connect fastboot usb in the bootloader. And in the fastboot command window type
Code:
fastboot getvar all
Although looking at the teamseven thread that kernel is for GSM phones.
Verizon use CDMA so it probably not compatible with your device. Unless I missed it in there I haven't read the entire thread. :good:
Edit:- using the search box in the teamseven thread turned up this
[quote name="nprez" post=51673515]Hello, and thank you for all the great work. I'm on verizon, running Stock 4.4.2, 3.11.605.1, sense 5.5, rooted, S-OFF. I flashed the appropriate version of the kernel and ended up in a boot loop, tried clearing cache and dalvik several times, and also reflashed the recovery with no joy. I checked the MD5, and download is all good. Restored my backup of the stock kernel and all good. Any tips? I'd really love to use this kernel. Thanks[/QUOTE]
This is for the international m7, it will not work with Verizon.
Click to expand...
Click to collapse
If you found my posts helpful, no need to say thanks. There's a button for that
Danny201281 said:
Connect fastboot usb in the bootloader. And in the fastboot command window type
Code:
fastboot getvar all
Although looking at the teamseven thread that kernel is for GSM phones.
Verizon use CDMA so it probably not compatible with your device. Unless I missed it in there I haven't read the entire thread. :good:
If you found my posts helpful, no need to say thanks. There's a button for that
Click to expand...
Click to collapse
Dammit. Maybe it's just bad luck that I managed to miss important information twice. I'll have to try a kernel that 100% certainly supports my ROM and device. (although the teamseven post showed up in the Verizon HTC One section of the forum)
Although I did produce a getvar.
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 1.13.41.0421
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: FA3AGS908421
(bootloader) imei: 990004282576317
(bootloader) meid: 99000428257631
(bootloader) product: m7_wlv
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0731000
(bootloader) cidnum: VZW__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4305mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-e47fb74b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!

Need your help to unbrick my Htc one M7

Hello,
I have a Htc one (M7) that is stuck in a bootloop. I first tried to find the solution in privious threads, but i could'nt find the right rom.
Thanks for your help.
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.22.3263.03
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.63.111.3
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA3**********
(bootloader) imei: 354*************
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3828mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-5d8b0f7651bb88c960f701ae91477674a
getvar:all FAILED (unknown status code)
finished. total time: 0.211s
- - - - - - - -
tampered
relocked
security warning
------
Please let me know if you need any further information.
And thanks a lot for your great work.
Any ideas mates ?
I tried to find a ruu.exe but i couldn't find it.
Anyone?
thank you
Unlock your bootloader... Maybe gonna fix it
Wysłane z mojego One przy użyciu Tapatalka
123-Quest said:
Hello,
I have a Htc one (M7) that is stuck in a bootloop. I first tried to find the solution in privious threads, but i could'nt find the right rom.
Thanks for your help.
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.22.3263.03
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.63.111.3
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA3**********
(bootloader) imei: 354*************
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3828mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-5d8b0f7651bb88c960f701ae91477674a
getvar:all FAILED (unknown status code)
finished. total time: 0.211s
- - - - - - - -
tampered
relocked
security warning
------
Please let me know if you need any further information.
And thanks a lot for your great work.
Click to expand...
Click to collapse
If you have relocked the bootloader with a custom rom, custom recovery or custom kernel installed on your phone, it will bootloop. If this is what you did, yes unlocking the bootloader will probably fix your problem.
Stachura5 said:
Unlock your bootloader... Maybe gonna fix it
Wysłane z mojego One przy użyciu Tapatalka
Click to expand...
Click to collapse
Thank you and Dziękuję Stachura5.
Thank you alray.
I managed to unlock the bootloader.
Now I have no boot loop but I only get the white logo screen.
the good news is; i can now access the recovery menu.
To me, it seems as if there is no os at all. For this reason the first thing that came to my mind, is to search for the right rom.
again, thanks.
I
123-Quest said:
Thank you and Dziękuję Stachura5.
Thank you alray.
I managed to unlock the bootloader.
Now I have no boot loop but I only get the white logo screen.
the good news is; i can now access the recovery menu.
To me, it seems as if there is no os at all. For this reason the first thing that came to my mind, is to search for the right rom.
again, thanks.
I
Click to expand...
Click to collapse
Good to hear that it helped. I had the same problem with my One after relocking the bootloader, so I had to unlock it again [emoji4]
Stachura5 said:
Good to hear that it helped. I had the same problem with my One after relocking the bootloader, so I had to unlock it again [emoji4]
Click to expand...
Click to collapse
Yes it helped, no boot loop , and i can access recovery menu. / the full half of the glas. , now I think I should find the right custom rom; right?
123-Quest said:
Yes it helped, no boot loop , and i can access recovery menu. / the full half of the glas. , now I think I should find the right custom rom; right?
Click to expand...
Click to collapse
Yes, now you need a ROM. Find one that suits your liking & try to put it (somehow) on the phone [emoji4]
Stachura5 said:
Yes, now you need a ROM. Find one that suits your liking & try to put it (somehow) on the phone [emoji4]
Click to expand...
Click to collapse
Anything suits me, as long as it´s working. : )
I tried 3 different run.exe roms, but i get an error notification.
should the ruu zip match my modelid and cid=
modelid: PN0710000
cidnum: 11111111
I have almost no experience in this kind of things, so maybe someone here could kindly suggest a specific rom.
thanks
I have a question please:
I am trying to flash the sense 7 rom using TWRP, do you think it suits my device?
thank you
123-Quest said:
I have a question please:
I am trying to flash the sense 7 rom using TWRP, do you think it suits my device?
thank you
Click to expand...
Click to collapse
Why shouldn't it? It's made for HTC devices [emoji4]
123-Quest said:
Anything suits me, as long as it´s working. : )
I tried 3 different run.exe roms, but i get an error notification.
should the ruu zip match my modelid and cid=
modelid: PN0710000
cidnum: 11111111
I have almost no experience in this kind of things, so maybe someone here could kindly suggest a specific rom.
thanks
Click to expand...
Click to collapse
What rom are your trying to flash, and how are you sending it to your phone?
---------- Post added at 12:22 PM ---------- Previous post was at 12:11 PM ----------
123-Quest said:
I have a question please:
I am trying to flash the sense 7 rom using TWRP, do you think it suits my device?
thank you
Click to expand...
Click to collapse
Sense 7 should work. Are you transferring the zip file from your computer to your phone internal memory or you are ADB pushing?
zainkool said:
What rom are your trying to flash, and how are you sending it to your phone?
---------- Post added at 12:22 PM ---------- Previous post was at 12:11 PM ----------
Sense 7 should work. Are you transferring the zip file from your computer to your phone internal memory or you are ADB pushing?
Click to expand...
Click to collapse
I tried to flash sense 7 from recovery/ side load, everything worked well, but then the touchscreen was too unresponsive. I am trying again now.
let's hope.
thank you
123-Quest said:
I tried to flash sense 7 from recovery/ side load, everything worked well, but then the touchscreen was too unresponsive. I am trying again now.
let's hope.
thank you
Click to expand...
Click to collapse
What do you mean by "touchscreen was too unresponsive"? Was it complitely unresponsive? You couldn't do anything with your phone?
donkeykong1 said:
What do you mean by "touchscreen was too unresponsive"? Was it complitely unresponsive? You couldn't do anything with your phone?
Click to expand...
Click to collapse
I mean I couldn't go to the next step using touchscreen, it must be some kind of bug. I am stuck again.
123-Quest said:
I mean I couldn't go to the next step using touchscreen, it must be some kind of bug. I am stuck again.
Click to expand...
Click to collapse
Not a bug. You have a very old h-boot. You will need to upgrade your phone in order to get newer touch drivers so your touchscreen can work
donkeykong1 said:
Not a bug. You have a very old h-boot. You will need to upgrade your phone in order to get newer touch drivers so your touchscreen can work
Click to expand...
Click to collapse
can you please give me a link, i don't even know what to look for.
123-Quest said:
can you please give me a link, i don't even know what to look for.
Click to expand...
Click to collapse
I need to get a hold of my laptop. If you can wait an hour or two till I get home, I will gladly help you
donkeykong1 said:
I need to get a hold of my laptop. If you can wait an hour or two till I get home, I will gladly help you
Click to expand...
Click to collapse
i am lucky to be here. thank you for your help.
I need to get up very early, so maybe i'll check your post tomorrow.
I learnt a lot of new things dealing with this issue/ again i really appreciate this wonderful atmosphere here.

Htc One M7 Dual Sim- custom Rom

Hello All,
I have been a big time fan of HTC for long and being a newbie to custom Roms, i'm herewith putting up this thread for some general questions which i need and expect some answers over with the same. The model which i use is Htc One M7C_Dug
Some time ago, while working over rooting process, i bricked my phone and with the help of some fellow members of this forum i was able to get my phone back to life which seemed impossible though. Once it was back to life, i noticed a few problems which were a big time issue for me.
1) Phone's sim slots are not working anymore. Actually it does not recognize any sim which i use. I got the same checked to the repairman and he said the hardware is running good and its a software glitch.
2) When i try to connect my phone through any available Wifi network, it does connects once but in a blink of n eye it shows "not in range" although i'm sitting next to my Wifi network. And once i forget the network, my Phone's Wifi never shows it up again.
3) I tried to install a mod for music a while ago but i guess it never worked off well on my phone and hung my phone off. All what i noticed that during that period my phone actually started reading my Sim card but due to its continuous hanging issues i could not even work on my phone for more than a minute so i had to roll it off through Nandriod backup.
I guess its the firmware which was advised to me, link for the same is attached beneath
http://d-h.st/HvQ
I would highly appreciate the efforts if someone can take the time out and can advise me what is wrong and how can it be corrected..??
Pradeep321 said:
Hello All,
I have been a big time fan of HTC for long and being a newbie to custom Roms, i'm herewith putting up this thread for some general questions which i need and expect some answers over with the same. The model which i use is Htc One M7C_Dug
Some time ago, while working over rooting process, i bricked my phone and with the help of some fellow members of this forum i was able to get my phone back to life which seemed impossible though. Once it was back to life, i noticed a few problems which were a big time issue for me.
1) Phone's sim slots are not working anymore. Actually it does not recognize any sim which i use. I got the same checked to the repairman and he said the hardware is running good and its a software glitch.
2) When i try to connect my phone through any available Wifi network, it does connects once but in a blink of n eye it shows "not in range" although i'm sitting next to my Wifi network. And once i forget the network, my Phone's Wifi never shows it up again.
3) I tried to install a mod for music a while ago but i guess it never worked off well on my phone and hung my phone off. All what i noticed that during that period my phone actually started reading my Sim card but due to its continuous hanging issues i could not even work on my phone for more than a minute so i had to roll it off through Nandriod backup.
I guess its the firmware which was advised to me, link for the same is attached beneath
http://d-h.st/HvQ
I would highly appreciate the efforts if someone can take the time out and can advise me what is wrong and how can it be corrected..??
Click to expand...
Click to collapse
So the RUU you flashed was for JellyBean? This will contain very old radio versions. I'm not saying that's the issue but it's a possibility.
What is your current
Code:
fastboot getvar all
Sent from my HTC One using Tapatalk
Danny201281 said:
So the RUU you flashed was for JellyBean? This will contain very old radio versions. I'm not saying that's the issue but it's a possibility.
What is your current
Code:
fastboot getvar all
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
C:\fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.26.0000
(bootloader) version-baseband: U2.07.3501.27
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.19.401.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HCXXXXXXXXXX
(bootloader) imei: XXXXXXXXXXXXXXX
(bootloader) meid: 00000000000000
(bootloader) product: m7cdug
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0771***
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3903mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d16dc66985
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.143s
Have been looking forward for some Radios to manually flash through TWRP but no help yet. But i noticed that once i restart my phone, it shows network for 3 sec. approx
http://forum.xda-developers.com/showthread.php?t=2419699
Pradeep321 said:
C:\fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.26.0000
(bootloader) version-baseband: U2.07.3501.27
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.19.401.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HCXXXXXXXXXX
(bootloader) imei: XXXXXXXXXXXXXXX
(bootloader) meid: 00000000000000
(bootloader) product: m7cdug
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0771***
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3903mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d16dc66985
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.143s
Have been looking forward for some Radios to manually flash through TWRP but no help yet. But i noticed that once i restart my phone, it shows network for 3 sec. approx
http://forum.xda-developers.com/showthread.php?t=2419699
Click to expand...
Click to collapse
Here are the latest radio images from the OTA firmware. I do not know the correct partitions to flash them to on your dual sim so you`ll need to find out if you don`t already know. https://www.dropbox.com/s/5k7jeu7wak7x385/M7C_DUG_L50_Radios.zip?dl=0
also i don`t know how well it will work the old firmware. I would recommend updating the rom and firmware properly if these radios don`t help. You should find everything you need here http://forum.xda-developers.com/showthread.php?t=2617159
Danny201281 said:
Here are the latest radio images from the OTA firmware. I do not know the correct partitions to flash them to on your dual sim so you`ll need to find out if you don`t already know. https://www.dropbox.com/s/5k7jeu7wak7x385/M7C_DUG_L50_Radios.zip?dl=0
also i don`t know how well it will work the old firmware. I would recommend updating the rom and firmware properly if these radios don`t help. You should find everything you need here http://forum.xda-developers.com/showthread.php?t=2617159
Click to expand...
Click to collapse
Hello danny,
Thank you for the update and while following the link i updated my phone to the latest available firmware Lollipop (5.0.2) but still my sim is un-readable. Do you have any other option which i can work around with??
Pradeep321 said:
Hello danny,
Thank you for the update and while following the link i updated my phone to the latest available firmware Lollipop (5.0.2) but still my sim is un-readable. Do you have any other option which i can work around with??
Click to expand...
Click to collapse
Well my experience with dual sim devices is limited. But there is a trick that has worked for other HTC one variants with the same problem. It is a work around but worth trying.
You can build up the back of the sim card with layers of sticky tap. This improves the seating and connection of the sim card. If this works it almost certainly means the sim tray or slot are worn or damaged in some way. Try it and let me know how it goes ?
Sent from my SM-T230 using Tapatalk
Danny201281 said:
Well my experience with dual sim devices is limited. But there is a trick that has worked for other HTC one variants with the same problem. It is a work around but worth trying.
You can build up the back of the sim card with layers of sticky tap. This improves the seating and connection of the sim card. If this works it almost certainly means the sim tray or slot are worn or damaged in some way. Try it and let me know how it goes
Sent from my SM-T230 using Tapatalk
Click to expand...
Click to collapse
I've tried that before but it cam up with no help..!!!
I'm currently trying to install Viper rom V9.0.0, lets see if it works, do u have any suggestions over which rom should i try my luck with??
Pradeep321 said:
I've tried that before but it cam up with no help..!!!
I'm currently trying to install Viper rom V9.0.0, lets see if it works, do u have any suggestions over which rom should i try my luck with??
Click to expand...
Click to collapse
I'm sorry I don't know which roms support dual sim. I didn't even know Viper was avaliable for dual sim.
I noticed with the dual sim you are able to open up the back to access both sim slots. Have you tried applying pressure with a finger to the main sim to see if that helps. It almost certainly seems to be an issue with sim card connection.
Edit:- @Pradeep321 Here is a CM 12 rom for dual sim cdug. http://forum.xda-developers.com/showthread.php?t=3199454
Sent from my SM-T230 using Tapatalk
Danny201281 said:
I'm sorry I don't know which roms support dual sim. I didn't even know Viper was avaliable for dual sim.
I noticed with the dual sim you are able to open up the back to access both sim slots. Have you tried applying pressure with a finger to the main sim to see if that helps. It almost certainly seems to be an issue with sim card connection.
Edit:- @Pradeep321 Here is a CM 12 rom for dual sim cdug. http://forum.xda-developers.com/showthread.php?t=3199454
Sent from my SM-T230 using Tapatalk
Click to expand...
Click to collapse
Thank you for the update..!! Have not been a Cyanogen Mod fan but will definitely try my luck with with it. Like is there anyone else in this forum who can guide me with a different ROM??
Hey Danny,
I could see a possible issue that my battery drains super fast even when i'm not using any of the calling or internet based apps..!! Is it usual with lollipop upgrade??
Pradeep321 said:
Thank you for the update..!! Have not been a Cyanogen Mod fan but will definitely try my luck with with it. Like is there anyone else in this forum who can guide me with a different ROM??
Click to expand...
Click to collapse
I wouldn't normally recommend CM roms either but I just happened to come across the thread in General. Thought you might like to try it.
Unfortunately the dual SIM devices didn't get much of a following here on xda so development is few and far between. I was going to suggest posting in the DualSim Mega thread but I see you already did. ?
Sent from my HTC One using Tapatalk
Danny201281 said:
I wouldn't normally recommend CM roms either but I just happened to come across the thread in General. Thought you might like to try it.
Unfortunately the dual SIM devices didn't get much of a following here on xda so development is few and far between. I was going to suggest posting in the DualSim Mega thread but I see you already did.
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
yes i posted my query in the DualSim Mega Thread but unfortunately i didn't receive any reply on the same.!!!:crying::crying:
Edit:: Just a noob question, can i install the radio of Htc One M7 Indian Varient as i would be using this sim here in India?? and if yes then please advise me where can i find the link for the same

Categories

Resources