so i bought a unlocked phone on ebay bout a few months from now. i live in canada, also im in rogers network and everything works fine except my connection. i can only go 2g/edge speed but not 3g!! i have a t-mobile phone unlocked.. anybody know what i can do to get a 3g connection? do i need to install a new image or rom!!!!? please help
You may be out of luck on 3G. To the best of my knowledge, I believe Roger's 3G network runs on the 850 and 1900 MHz bands. However, the G1 runs on T-Mobile's 1700 and 2100 MHz bands. So Edge is the best you'll get (speed-wise).
TaurusBullba said:
You may be out of luck on 3G. To the best of my knowledge, I believe Roger's 3G network runs on the 850 and 1900 MHz bands. However, the G1 runs on T-Mobile's 1700 and 2100 MHz bands. So Edge is the best you'll get (speed-wise).
Click to expand...
Click to collapse
T-Mobile's rollout of UMTS in the US will focus on the 2100/1700 MHz bands, whereas UMTS coverage in Canada is being provided on the 850 MHz band of the Rogers Wireless network. I think 1900 was added later as well.
My HTC HD is edge (2G only). But I use a lot of WiFi when ever possible.
I purchased a jailbroken AT&T Tilt 2 online but Im using T Mobile service and I was told that I wouldn't be able to access the T Mobile 3g Network with this device. Could someone verify that this true or if not can someone give me some tips on how to set it up on my device.
Its true, because I have a Tilt 2 unlocked to T-Mobile as well. Is there a way to get 3G speeds, I don't know. But honestly, I've never really noticed a difference. But then again, I do stay away from data heavy sites like Youtube and whatnot.
Hmm, interesting question. The main issue is whether the phone has the right bands to connect to the 3G network in question. Its a hardware issue, and either the phone has the right bands built into the chipset or it doesn't. There is no way to change this with software or by changing settings.
T-Mob uses 1700 and 2100 MHz bands, where ATT uses 850 and 1900 MHz bands. HOWEVER, the ATT branded Tilt 2 also has the 2100 MHz band for international use. If your T-Mob service area is on the 2100 MHz bands, its possible (if you area is on 1700 MHz, its not going to work no matter what). In theory, it SHOULD work. I've made many trips to Japan, which uses 2100 MHZ for both voice and data, and my Tilt 2 (and old Tilt before it) has always worked flawlessly on their networks.
But whether it really works or not, I have no idea. Searching around the net yields some posts on other forums asking the same exact question, with conflicting answers (perhaps somebody on here can enlighten?). My gut says, its either its going to work or its not, it shouldn't take any additional setup. Have you tried it yet?
But in short, it was a mistake to buy the ATT branded version. You should have bought the T-Mob branded Touch Pro 2.
Oh, and wrong subforum, BTW. This has nothing to do with ROM development. This should be in the Touch Pro 2, Tilt 2 General forum. But don't cross post there, the mods will probably move this thread over there for you.
redpoint73 said:
...snip...
T-Mob uses 1700 and 2100 MHz bands, where ATT uses 850 and 1900 MHz bands. HOWEVER, the ATT branded Tilt 2 also has the 2100 MHz band for international use. If your T-Mob service area is on the 2100 MHz bands, its possible (if you area is on 1700 MHz, its not going to work no matter what). In theory, it SHOULD work. I've made many trips to Japan, which uses 2100 MHZ for both voice and data, and my Tilt 2 (and old Tilt before it) has always worked flawlessly on their networks.
...snip...
Click to expand...
Click to collapse
The 2100 MHz band you're referring to is different on both companies' devices. For T-Mobile, 2100MHz is the upload frequency. The worldphone AT&T 2100MHz band is a download frequency. 3G requires 2 frequencies to operate in that manner.
The 2100MHz frequency is accompanied by the 1900MHz frequency for uploads. The AT&T Tilt2 has this frequency set to allow both.
As for Japan, I didn't know they were on the 2100MHz band. I've only every seen a couple of companies on 850, 1500, or 1700 MHz. Where were you that you used 2100MHz or which company? I just like to keep up on where the bands are useful when I make trips to Asia.
Ahh, that's right, I think I did read somewhere, that the 1700/2100 MHz bands are used by T-Mob as download/upload. Not like ATT, where which of the 850,1900 MHz band is used for 3G depends on the geographic location/market.
That means the OP is SOL on getting 3G on the Tilt2, right? He would need BOTH the 1700 and 2100 MHz bands on his phone?
Japan uses 2100 MHz exclusively, standardized nationwide, as far as I know. Same with South Korea (although ATT lists that one carrier in S. Korea also uses CDMA 1800, not sure what the deal with that is).
If the 2100 MHz band on the ATT Tilt 2 is just for download, wouldn't this mean that my phone would not be able to connect to the data network in Japan?
redpoint73 said:
Ahh, that's right, I think I did read somewhere, that the 1700/2100 MHz bands are used by T-Mob as download/upload. Not like ATT, where which of the 850,1900 MHz band is used for 3G depends on the geographic location/market.
That means the OP is SOL on getting 3G on the Tilt2, right? He would need BOTH the 1700 and 2100 MHz bands on his phone?
Click to expand...
Click to collapse
Exactly right. It's a hardware problem, not software as some people think. I seem to answer this question at least once a week here. lol The radio chip is different for each model of the Rhodium. That's one of the differences between the several versions.
Japan uses 2100 MHz exclusively, standardized nationwide, as far as I know. Same with South Korea (although ATT lists that one carrier in S. Korea also uses CDMA 1800, not sure what the deal with that is).
If the 2100 MHz band on the ATT Tilt 2 is just for download, wouldn't this mean that my phone would not be able to connect to the data network in Japan?
Click to expand...
Click to collapse
It depends on what the network is set up as. 3G worldwide requires two bands to operate because of the bandwidth. GPRS and EDGE only require one. If this 2100 MHz frequency is one of the later, then it will work just fine. If this is a 3G band, then it is VERY likely to be paired with the 1900MHz frequency range. That's on GSM, anyway. I'm not 100% sure what CDMA frequencies are their.
Hi guys,
I've had a look around and can't really find much info on bad ESN's. Most of the questions are resolved with a -"find a carrier who will reflash your phone". The phone I'm looking at is from someone who didn't pay their phone bill. If I import this phone over to Australia - what will a bad ESN do? I'm planning to buy a pre paid SIM card over here, and I'd like to put a basic Gingerbread rom on it.
I can see that a bad ESN means you wouldn't be able to use the phone on the network it was sold on, but if you unlock the phone doesn't that mean you can put on whatever carrier you'd like?
Are there any issues with doing this?
The next part of my question is about the Vibrant. From the info I've found this...
Will My SGH-t959 (Vibrant) Phone Work In Other Countries And How Do I Unlock It?
The SGH-t959 is a quad band dual mode handset. It supports GSM frequencies of 850, 900, 1800, & 1900. It supports UMTS 1700, 1900, and 2100 frequencies. There is a possibility the phone may be used with a wireless operator outside the United States however this is not guranteed. The phone has been optimized to work on the intended carrier it was designed for.
Click to expand...
Click to collapse
From what wikipedia says on Vodafone (in Oz,)
The GSM mobile service on 900 MHz and 1800 MHz covers 94.52% of the country. The 3G 2100 MHz UMTS network is available in metro areas of major cities and some larger regional centres covering 80% of the population. Expansion of the 3G UMTS network using 900 MHz to equal or surpass the GSM coverage is due to be completed by 31 August 2009 [1] [2].
Click to expand...
Click to collapse
Will this work here? It's seems like it should? (I'm in Melbourne) I'd like the 3g to work for the internet etc.
Thanks guys.
Beumpp....
I can't guarantee it but technically according to the site below, it should work:
http://www.phonearena.com/phones/Samsung-Vibrant_id4747
UMTS[3G] frequencies: 1700/2100, 2100
Optus, vodafone and three use 2100 and 900
Yo folks. I am finally flying back to Toronto tomorrow after having been here in Italy for the past 4 years, and I am so pumped up ...
Anyways, I have got an Italian Samsung Galaxy S i9000 with 1900/2100 UMTS bands and the current baseband firmware is I9000XXJVU.
I was wondering if by flashing a Canadian baseband version my SGS perhaps would might give me 3G with Telus or Fido in Canada.
Is that something that could be done via sw or is rather something hardware involved??
Thanks
Do not flash a canadian baseband. There is no way to enable the 850 MHz band in your hardware.
However, in Toronto you will be able to get by by using only the 1900 MHz band. 850 MHz is mostly usefull for rural areas and/or basements.
So to answer your question, yes, it will work.
With Rogers/Fido, you will fall back to EDGE if you are out of the 1900 MHz UMTS coverage.
With Telus/Bell you fill loose signal if you are out of the 1900 MHz UMTS coverage.
zorxd said:
Do not flash a canadian baseband. There is no way to enable the 850 MHz band in your hardware.
However, in Toronto you will be able to get by by using only the 1900 MHz band. 850 MHz is mostly usefull for rural areas and/or basements.
So to answer your question, yes, it will work.
With Rogers/Fido, you will fall back to EDGE if you are out of the 1900 MHz UMTS coverage.
With Telus/Bell you fill loose signal if you are out of the 1900 MHz UMTS coverage.
Click to expand...
Click to collapse
Cool mate.. didn't know some Canadians mobile ISP uses 1900mhz band for 3G.. I am going to get a find number today ..
Thanks
Hey, I need help running 3G over 2100Mhz frequency on unlocked Tmobile D415, Ive tried using both these codes to enable 3G over 2100 and its not working:
3845#8415#
*#*#4636#*#*
I read some where that T mobile offers a rom for europe and asia where 2100MHz for 3G is enabled, any help please?
I am pretty sure the T-Mobile variant does not support the 2100 MHz band used in Europe. The supported frequencies are only 850 MHz, AWS (1700/2100 MHz), and 1900 MHz. The 2100 MHz used for AWS 3G is not the same frequency range used for 2100 MHz in Europe.
This phone was not designed with the international market in mind, considering it's cost.
Here is a more detailed explanation: http://www.phonescoop.com/articles/article.php?a=99&p=1493
The FCC wanted to harmonize its "new" AWS spectrum with Europe's UMTS 2100 band, since both would be used for new "3G" phone service. Unfortunately, as you can see above, the lower half of Europe's UMTS 2100 band almost completely overlaps with our PCS band, so complete harmonization wasn't an option.
However, given the circumstances, the FCC did do a pretty good job of harmonizing AWS with the rest of the world. The upper part does line up perfectly with Europe's UMTS 2100 band, and the lower part does line up with Europe's DCS band. Therefore manufacturers already building GSM+WCDMA "world phones" actually won't have to support any additional frequency bands at all.
Click to expand...
Click to collapse