[Q] Help! Fastboot USB but computer isn't seeing my device - One (M7) Q&A, Help & Troubleshooting

Ok so long story short: I installed Cyanogenmod onto my HTC One using their installer, used it for a month or so and decided to flash it back to stock, but not before flashing a Google Play Edition rom (Android Revolution's). The rom got me stuck in a bootloop which i've read should be pretty easy to get out of, however my computer won't recognize my phone. I've also done something while trying to clear caches and what not that says the phone isn't rooted. I've tried to re-root it but since i can't drop the file into my sd file (can't see my phone on my computer) i can't do that either. Whenever i do try to reboot out of bootloader i get stuck at the HTC loading screen. I can get the red FASTBOOT USB and my comp dings when i plug in, but i can't see my phone. I've tried re-downloading drivers. Device manager sees my phone, but i can't access my sd card. I also can't get abd push to work either.
I'm pretty damn new to all this...probably started playing around prematurely. I've read quite a few tutorials so i'm not completely dense as to how all this works, but pretty close to it. If i could just get my computer to see my device, get the root and a new rom file on my sd, i'm pretty sure i could figure the rest out. Also, my apologies if this has been answered before; I did some digging an didn't see anything that helped my issue. Any help would be appreciated.

Also...i should probably mention that i was playing around with the format /system etc commands in CMW recovery...and it's likely i may have rebooted at some point afterwards....so i'm pretty sure that is what is causing the HTC screen issue, but I still feel my main issue here is the inability to get any zip files or anything for that matter onto my sd.
Once again...any help here would be greatly appreciated. Thanks

Related

[Q] Phone won't display home screen.

So I was looking through the topics in this part of the forum today, and I saw "[Q] What is causing "Communication Failed" error?" (It won't let me post the link to it?) I followed the link in that topic and did what that guy said would help, and after doing that I restarted my phone. It did all of the startup animations correctly, I can still access the recovery menu out of it, but when I get past the startup animations, I'm just greeted with a black screen. The buttons on the bottom of the phone are lit up, but the screen gives no response. I can't turn it off without taking out the battery, and that doesn't help. If possible I'd like to try to fix this without sending my phone in, or without deleting the user data. Any fixes for this?
I would try re-downloading the ROM you want to use and then re-install it. But maybe there's a better fix, that's just what I've done whenever I encounter something strange.
sschrupp said:
I would try re-downloading the ROM you want to use and then re-install it. But maybe there's a better fix, that's just what I've done whenever I encounter something strange.
Click to expand...
Click to collapse
I can't exactly put anything onto my phone with this problem. I can't access the screen at all past the startup animations. It's just black.
Not Bricked!
You have a few options as it seems your phone is "on" and should be recognized by your computer still.
What was it you were doing to the phone before it started doing this behavior.. wasn't quite clear on that....
If it was a mod to change your framework-res.apk. You can find the "stock" one in the ROM you originally downloaded and revert back to stock by doing an ADB Push to your /system/media folder.
Or... you will need to flash your phone back to stock - which means you will need to go here and download Odin and run it.
Always helps to have that "plan b". Bottom line though - your phone isn't bricked and you should be able to restore it and continue on. But... please note that ODIN will wipe your phone and anything you had on it will go bye bye.
androidforums.com/captivate-support-troubleshooting/217905-cant-connect-t-server-updates.html
I followed the advice on how to fix that problem in the second post in that topic. When I restarted my phone the screen just ended up going black. I'm going to try that Odin thing, I hope it works.
e. It's kinda annoying how I can't post links.
Ok Edit again, I've tried the Odin thing, and it just isn't working. Now whenever I try to put my Simcard back in, It doesn't even do the startup things, it just goes to that Phone Caution symbol PC picture thing. I'm worried that I'd have to go get a replacement.
Can you please provide us with a list of everything you have done to your phone and how you tried to use Odin? That will help us help you. Please be specific, this will get you the help you need. I read the link, did you use ADB or the first method in that thread? Sounds like you messed up while trying to fix your device manager. I am not sure how it is you tried to use Odin, try using a rear usb port, Odin can be a pain, make sure you have the drivers installed.
Ok, Here's a list of what I've done to my phone over the past few days.
1. I rooted it.
2. I kinda sorta half-assed the process of allowing me to put on Non-Market apps onto my phone, I made it so that the settings.db file had the permissions all set up, but I never replaced the first settings.db file. (It's just sitting on my phone's interal SD card.)
3. I tried to do that Non-ADB method listed in that topic I linked to. After that I started having these problems.
4. I accidently ended up clearing the Data cache through the recovery menu thing. Just an accidental moving of the buttons. It didn't seem to effect anything.
5. I booted the phone into recovery mode and tried the Odin thing. It got stuck at File Analysis, and I tried again. It still got stuck, and I let it continue trying it while I was eating dinner. After I got back it was still on that, so I took out the USB cord and phone battery and put the Sim card back in. When I try to boot it up it goes to that PC error phone thing. (I can't exactly get an image of it, I hope you know what I'm talking about.)
And that's all I've done to it. I'd try a different USB port, but I don't have any more. I'd try my other computer, but that's a Linux machine, and Odin is a Windows/DOS executable file. I'm pretty sure the drivers are installed correctly, as I had been doing stuff with the phone via USB just yesterday.
I hope that's enough detail to help figure out something.
I'd hate to doulbe post, but I really really do need the help with this. If any of you have any advice for it all, please, feel free to contribute. If there is no fix for this, and my phone is actually bricked, just let me know so I can go get a replacement.
Did you make sure you had odin started up BEFORE you put your phone in download mode? Odin is very touchy and you have to do things exactly right or it won't work.
Yes, I've made sure to follow all of the steps right to the last peroid. I'm probably just going to have to go get a replacement anyway.

phone semi bricked

ok the phone is not bricked an i know there is only one way to brick a hero blah blah blah. but i have psfmod recovery flashed to my phone and i was trying to do the firats mtd partition thing. so i did everything it said and when it came time to do adb shell,reboot recovery it wouldnt work. so after about 5 minutes i realized that the computer wasnt recognizing my phone. i guess cause of the psfmod recovery. and i had already wiped everything. so i wiped everything again and flash zenaraia rom back on. but after rebooting it just stays at the white HTC screen. waited for an hour. i tried wiping and reflashing like 20 times. and i cant mount the sdcard to put another rom on there since the computer wont recognize my phone. anybody following me? lol any suggestions?
It seems like you might need to RUU... have you tried doing that?
cp0020 said:
ok the phone is not bricked an i know there is only one way to brick a hero blah blah blah.
Click to expand...
Click to collapse
Haha I came here just to possibly rip on the OP when I read the title but saw you already mentioned it :/ So you put it in your thread title anyway?
As the guy said before, try running the RUU - should be able to be done in the bootloader.
OR if you can boot up into a rom (wasn't too sure judging by what I read) just get a Dropbox, throw a rom.zip on it, get the app for the phone, sync and bam. New rom.zip on your phone to try.
If neither one can be done, you need to find another phone, camera, sdmount...something so you can add files to it. Even if its just a HERCIMG.zip to update via the bootloader (look up s-off if you don't know what that's about)
Good luck
thanks for your help guys. i'll try the RUU but i dont think it will work since my computer wont recognize my phone while in bootloader. im pretty sure it's just the psfmod recovery that f'd everything up. and yeah i cant boot into a rom. im hoping that somehow my rom.zip just got messed up somehow.
ok yeah RUU didnt work. my only other option is to find a laptop or something
Try getting a live Fedora or Ubuntu linux cd (or any flavor for that matter) and booting it up.
what would that do? i went back to the psfreedom thread and i saw that adb and usb mass storage does not work with that recovery. i should have read better lol
Same thing happenned to my evo..i kept tryna flash the wrong kernel wit nym rom..all i did wuss flashed the rom without da kernel and walla...it started workin again..thnx god..idk if dis would help but it worked for me..
Sent from my PC36100 using XDA App
ok i got it to work. i was talking to nfinitfx45 on google talk and he said to boot up in fastboot and then plug the phone into the computer and then i can run the RUU and it worked like a charm now i just gotta re root :/
cp0020 said:
ok i got it to work. i was talking to nfinitfx45 on google talk and he said to boot up in fastboot and then plug the phone into the computer and then i can run the RUU and it worked like a charm now i just gotta re root :/
Click to expand...
Click to collapse
yay !!! im just quoting this because this bears repeating...
1 - if recovery is not working, go into fastboot to get pc to recognize phone...
2 - if roms (recovery or whatnot) are not working, reflash to RUU to start fresh...
(and adding)
3 - once youve started fresh, then flash a working-recovery and go back to your latest [nandroid] backup...
(you always have a good backup to use, right ?) h.
I think all you had to do was flash a different recovery from terminal if you were able to boot up the reason y I didn't use that mod was the fact you can't use adb wen u flash that recovery in that post I think the op posted the link to the old recovery that allowed you to use adb good luck
Root-Hack-Mod-Always™
that was the problem. i couldnt boot to a rom cause i had erased all data and my rom.zip had got corrupted somehow. and with that recovery you couldnt do adb or usb mass storage. so i started freaking out lol. thanks again nfinite
So I'm having a similar problem. I can use ADB to reboot my phone, so I know the computer is talking to the phone but it wont get past the HTC screen. I was trying the firerat mod and made it to the reboot as well but it never came back up. If I reboot to recovery its a white screen with the android on the skate board but the only option is to clear user data and then reboot again which goes back to the HTC screen. I tried the RUU but it wont install because it says my phone doesnt have enough battery (it's been charging on and off for the better part of 24 hours now.) Any assistance or advice would be greatly appreciated.
first, can you use usb mass storage? if so the you need to put a rom on your sdcard and flash it and see if that fixed it. and if you want to RUU. then pull the battery and put it back. then hold volume up and power at the same time. then hit the button it says to to go into fastboot. you should already be in fastboot though. and then while in fastboot plug the phone into the pc and you may have to install drivers. and then you can run the RUU.
I'm not exactly sure what happened but i got it working. I ran "adb reboot-bootloader" from the menu that brought up i was able to get back to the clockwork recovery, restore my nandroid and finish the mod. all appears to have worked beautifully except that last night my battery went completely dead over night (for the first time) although i'm doubting that that has anything to do with any of this

[Q] urgent helped needed please

I bricked my CDMA Hero. I rooted it with the super one click, and installed a early version of froyo, and had some issues with it. I wanted to get it off, so I used CWM recovery, and formatted everything. Now when I turn it on it goes to the HTC opening screen, and stays there for hours until the battery dies. It will charge, but my computer doesn't recognize it, and it will not boot. What can I do?
Bricked means it is a brick and that is it, your phone still turns on so the good news is that it is not bricked.
Need some more info before anyone can help:
1. You reformatted everything using clockwork recovery
2. Did you re-install a new ROM?
3. Did you restore a nandroid backup?
I would recommend booting into recovery and wiping everything (factory reset and dalvik-cache) in recovery, then reinstall froyo - once you are booted and running you can figure out what you want to put on it. At least your phone would work then.
stonemad said:
I bricked my CDMA Hero. I rooted it with the super one click, and installed a early version of froyo, and had some issues with it. I wanted to get it off, so I used CWM recovery, and formatted everything. Now when I turn it on it goes to the HTC opening screen, and stays there for hours until the battery dies. It will charge, but my computer doesn't recognize it, and it will not boot. What can I do?
Click to expand...
Click to collapse
Just what Heaterz16 said...
I'm also pretty sure your phone isn't bricked, as long as you can still get into Recovery, it Most Likely can be Fixed!
I also Recommend trying to Wipe Everything, then Reinstalling a New Rom, Also as a Suggestion... If it were me I'd Probably Choose a Different ROM to install! My Very First ROM I Flashed was a Cyanogen one, and I had Trouble with it Booting Also!!
Try LiquidSense... its Only 2.1, but its Stable, It Boots Fast, and just plain out Fast as Hell!
You can always Switch to Whatever you want... Once you get your phone back to a Working Condition!
Good Luck!
Sent from my HERO200 using XDA App
I cannot get it into recovery now. It will turn on, but it stops at the initial HTC screen, and stays there until the battery dies. When I connect my phone with my computer, the computer recognizes it, but I can't seem to get the 2.1 exe from HTC.com download to the phone. My guess is I wiped the thing clean. Unfortuneately, I didn't back anything up.
I can't even get into recovery, it just sits on the HTC startup screen until the battery dies. It does recognize when I connect it to my computer, but running the 2.1 exe doesn't do anything.
Can you adb into the phone and flash a recovery?
I think that would be a helpful start.
stonemad said:
I can't even get into recovery, it just sits on the HTC startup screen until the battery dies. It does recognize when I connect it to my computer, but running the 2.1 exe doesn't do anything.
Click to expand...
Click to collapse
Pull the battery, hold volume down and power and you should boot into bootloader. I believe it is *home* to get you back into recovery. Then reinstall a new rom and you should be good to go.
kwahomba said:
Pull the battery, hold volume down and power and you should boot into bootloader. I believe it is *home* to get you back into recovery. Then reinstall a new rom and you should be good to go.
Click to expand...
Click to collapse
kwhomba,
he can't get into the recovery.
mtran2988 said:
kwhomba,
he can't get into the recovery.
Click to expand...
Click to collapse
t-y, got it. Yeah, then adb a new recovery image may be the only thing. But he may not even be able to get in then.
Just a matter of waiting right now.
He did say his computer was recognizing his device, so he might be ok.
If he can flash a new recovery, or even just adb.. then he can start rebuilding it.
stonemad:
You'll want to grab a recovery, and try to connect to your phone via ADB when it's on.
Then do adb shell
then : flash_image recover [name of recovery].img
let us know
Ok, I can get to the CWM recovery, there is no backup files, no recovery files, and no files on my sd card. I cannot seem to get an opperating system on. I mounted my phone to my computer and downloaded .zip files, but it still says no files available.
How do I flash a recovery, I can't find any files anywhere.
i have .zip files on my sd card to flash, but when I try to apply them it says no files found.
Ok, I have been working on this all day. Thank you to every body who answered. This is the situation as best as I see it. I can use the power and the down volume buttons to go to recovery mode. I have ClockworkMod 2.5 and can mount my computer to my sd card. It appears that I don't have an opperating system at all, or anything else on the phone. I have downloaded several .zip files and tried to install them, I can mount them, but when I try to apply them it states that there are no update.zip files on the sd card. I have deduced that I need an opperating system for an update to work, but I could be wrong. I am having a hard time finding the right files to use to get my phone to go. It seems salvageable, but I'm not sure how. People have sugested a couple of Mods to instal, but I don't know how to do that with what I have. CWM is asking for a update.zip, or a recovery.zip, but I don't know wich one at which time, or even how to get it to flash. That is what I think I know, but that is subject to change depening on what you all know.(showing just how foolish I really am) Thanks again people for you time and advice, I really do appreciate it.
Don't select "install update.zip", select "install zip from SD card" or whatever the option is called.
I've tried that too, it seems like all the software is gone. HTC, Sprint, Google, and Android. Does anybody have a download they think will work. I'm at the point to try anything.
stonemad said:
I've tried that too, it seems like all the software is gone. HTC, Sprint, Google, and Android. Does anybody have a download they think will work. I'm at the point to try anything.
Click to expand...
Click to collapse
What software are you talking about? Sprint, Google, and Android what, specifically? A download for what?
Mount usb storage in recovery, put rom of your choice on there, and flash?
what about kernals, how do I know that I have everything I need?
ROMs generally have kernels in the zip builds already. From the sounds of it, you're kind of lost at what you're doing.
Do you have a SD card reader? if so, plug in the SD card to your computer and pull over a ROM zip, like Cyanogenmod or whatever is to your liking.
Then in recovery, go to "install zip from sdcard"
go to "Choose zip from sdcard"
then search for the ROM zip you put on the sd card.
State exactly STEP BY STEP, what you are doing. Your phone is perfectly fine, you just dont have a ROM on your phone, which is why you cant boot. You're not missing kernels, or anything, you simply dont have the baseline of a ROM on your phone yet.
Post back
I don't know where or how to find a rom, I have heard good things about cyanogen, but can't seem to find where to download it. Is ClockworkMod a rom, and if so how do I use it. You're right, I got way in over my head, and now I just want my phone back the way I bought it. What is your favorite rom, and can you give me a link. Thanks again everyone.

Need help factory resetting [somehow solved]

Hey guys, I've encountered quite the problem with my N7.. I was flashing PA onto it, and it didn't work out, so I tried going back to what I had before, but my folders had gotten all messed up for some reason, and long story short, whenever I flash a new ROM while factory resetting, it doesn't work (can't access folders, can't connect via usb (or when I can I can't edit files or move stuff onto there), managed to get a file manager installed but when I put my CWM backup in the right spot it wouldn't restore.. **** hit the fan), and I can't get my computer to recognize it in fastboot mode, help?
For the record at this point I'm okay with relocking the bootloader and unlocking it for a full and complete wipe, but it won't even let me do that much..
Nvm finally with the help of a toolkit i got fastboot to reply... guess it just needed to be polled a bunch of times, was really weird :S

[Q] USB/Blackrose Bad Combo Help

Hiya!
Been on the forums for years modding my Nexus One and would like to thank everyone for their humongous contribution! 3 years of constant upgrading and improving of what turned out to be the best phone ever!
Now, I've come to an end where my self-confidence took over caution and preparation and i think i've made a boo-boo.
Long story short, i have a unlocked Nexus One that has been running a CM10 ROM with Blackrose for a good 6 months. Most of the functions were working fine, except for a few glitches, but last night i decided to go back to the roots, and install a stock Gingerbread ROM. I found a unrooted GB ROM, and went straight on to renaming it to PASSIMG, throwing it on card and rebooting. Now that's where the funny things started:
First, all goes well, click Volume Up, get it started, and than a screen with all OKs except for [7] BOOTLOADER - Fail-PU and a message saying 'Only Blackrose can be flashed'
Next, I get 7 OKs, except for BOOTLOADER, and the following: Partition update fail! Update fail! Do you want to reboot? Y/N
Figuring i forgot to uninstall Blackrose and need to do so, i let it restart, it comes up with a clean un-rooted GB ROM, and here's where my troubles start.
1. USB Connection: Plug it in, laptop doesn't recognize it at all. Classifies it as 'Unknown Device' and that's it. Tried fresh drivers, Universal Naked Drivers, SDK drivers, ASUS tablet drivers, nothing. Tried 3 cables, the HTC one, a Blackberry one and a Samsung one. Nothing. Uninstalled all USB hubs/devices, restarted the laptop multiple times. Debugging ON/OFF, no difference. I'm at a loss here, no clue what else to try!
2. Fine, i thought, let's flash a rooted rom! PASSIMG on the card, phone finds it, gets to the line 'Parsing... Passimg.zip' and goes back to the neutral screen. Tried it multiple times, different ROMs, nothing.
3. At this point, figured maybe an earlier ROM will cause an OTA update and fix things up. FROYO PASSIMG on the card, flashed 'succesfully', just like in #1, reboot to clean un-rooted FROYO. Checked USB connection, same again. OTA Update - constantly failed.
Been reading through Wikis and Q&A's here all day today, everything seems to be so easy to fix as long as you get a live ADB connection, and i know i could fix it, but i just can't get the laptop to recognize the bloody phone! Do not have access to another computer just now, so can't check whether it's just my Vaio.
So now, the questions:
1. Any other ideas on the USB issue? The phone does not display the usual 'choose your option/mass storage...' when connected, and nowhere in the menu is there an option for that.
2. When booting into recovery, i get the green droid with the white triangle and the !, and then get into the 3e recovery that has an 'update.zip' option. can i install a custom recovery without the phone being rooted? just of the sdcard? is there an update.zip that can re-stock my HBOOT?
any other ideas will be greatly appreciated, as of right now i am stuck with a FROYO handset that is perfectly capable of running JB, and it's really frustrating!
thanks in advance for all your help, cheers!

Categories

Resources