I don't know what happened, the Note I, first had Philz recovery, then I flashed the kernal & asylum Rom as per instruction, got some error, so I reboot, then I got CWM, flash again, reboot, didn't work, hold three buttons got into recovery now it's TWRP 2.7? ? Didn't know 2.7 is even available for the Note I. What is going on?
I think 2.7 is not available for the Note now.
But I have TWRP on the Note I N7000
kuromusha38 said:
But I have TWRP on the Note I N7000
Click to expand...
Click to collapse
It's because the asylum rom u flashed has TWRP recovery built in. When you flashed it, the TWRP override your CWM.
kuromusha38 said:
I don't know what happened, the Note I, first had Philz recovery, then I flashed the kernal & asylum Rom as per instruction, got some error, so I reboot, then I got CWM, flash again, reboot, didn't work, hold three buttons got into recovery now it's TWRP 2.7? ? Didn't know 2.7 is even available for the Note I. What is going on?
Click to expand...
Click to collapse
The kernel you flashed had CWM. The PhilZ version you had probably didn't have SELinux support, so it couldn't flash Asylum ROM. You rebooted recovery, it loaded the recovery from the kernel you flashed. Whatever the kernel was, it had SELinux support, so you were able to flash Asylum ROM. Asylum ROM uses TWRP, so when you booted into recovery, you had TWRP. And yes there is TWRP 2.7.0.0 for our Note. Not strange at all
Related
hey guys,, i seem to have stuffed the recovery of my phone,, i stupidly installed cwm on my phone without root, but when i reflashed with odin the stock recovery works but when i install cwm, it doesnt go into recovery
CWM doesn't require root!
Try to reflash a stock rom. Not the one package file but the whole rom.
---------------XDA Premium--------------
Don't be a noob. Be a newbie..!!
Details here.
___________________________________
i have tried, once i flash cwm it doesnt boot into recovery,, ill try redownload and see if that helps
finally got it to work, i found a odin flashable cwm and it now works
ok now that i have cwm semi working on my phone, its now very difficult install roms, the only rom i can get to work on my phone now is stock,,, i now cannot flash cwm from recovery otherwise i get cwm bootloop only flashing by odin works, all custom roms get bootloop no matter how many times i flash and wipe data/cache,, i think my phone is stuffed
You sure you're installing cwm and roms for your device? What model ace do you have? (Not the i model right?)
dxppxd said:
You sure you're installing cwm and roms for your device? What model ace do you have? (Not the i model right?)
Click to expand...
Click to collapse
yeah mate im sure, i know what im doing, but it just doesnt seem to work anymore lol,, i have the T model
Make sure it is Just the "S5830" Any other then your in the wrong thread.
Tbh The order i do it, Flash the latest stable stock rom Via odin, Flash update {Any Kernel} (On phone) Then Reboot into CWM To flash a rom.
JDMBrooksy said:
Make sure it is Just the "S5830" Any other then your in the wrong thread.
Tbh The order i do it, Flash the latest stable stock rom Via odin, Flash update {Any Kernel} (On phone) Then Reboot into CWM To flash a rom.
Click to expand...
Click to collapse
yes it is, im not a noobie,, done that too,, im trying to flash cm9 b10 now but its stuck at samsung, and yes i have done data wipe and cache wipe
Only way i can think of is:
Flash new software with Odin: http://www.4shared.com/rar/FCyxijg8/odin_s5830_package.html
Then flashing "CWMRecovery" {AttacthMent} as an update through stock recovery as an update
Then reboot into CWM Recovery To wipe data Etc Etc, Then flash what ever ROM you want..
please more info man really not helping.
JDMBrooksy said:
Only way i can think of is:
Flash new software with Odin: http://www.4shared.com/rar/FCyxijg8/odin_s5830_package.html
Then flashing "CWMRecovery" {AttacthMent} as an update through stock recovery as an update
Then reboot into CWM Recovery To wipe data Etc Etc, Then flash what ever ROM you want..
please more info man really not helping.
Click to expand...
Click to collapse
ok ill try to remember what i did to stuff the phone,, ,i flashed my phone with s5830xwkt7 the rooted and flashed cwm 5,, i went to flash a custom rom but chose the wrong one and took the battery out,,, booted into cwm and did a full wipe and flashed the custom rom,, tested the rom and went back to stock rom, done root and installed cwm 5 again then went to reboot back to cwm for flash oc kernel and it started to bootloop after the samsung logo,,, its all fixed for now but im sure it will happen again
winxuser said:
ok ill try to remember what i did to stuff the phone,, ,i flashed my phone with s5830xwkt7 the rooted and flashed cwm 5,, i went to flash a custom rom but chose the wrong one and took the battery out,,, booted into cwm and did a full wipe and flashed the custom rom,, tested the rom and went back to stock rom, done root and installed cwm 5 again then went to reboot back to cwm for flash oc kernel and it started to bootloop after the samsung logo,,, its all fixed for now but im sure it will happen again
Click to expand...
Click to collapse
Flash "Root" After Flashing "CWM" See if that helps? if not please try the order i have gave, or try looking for different resources.
The Sources i have given you are working fine for my Ace.
Hello there.
I have a problem with my N7000. Today I've flashed stock firmware onto my phone, everything went ok, but I have a problem now. When I'm trying to install something from recovery, I can't. I select the ROM, everything is beeing checked, etc, and when it wants to install update, a message appears: "This packgage is for 'galaxynote,n7000,N7000,GT-N7000' devices: this is a ' '." . This happens with every single rom that I am trying to install via recovery. I tried to flash stock firmware two times, two different, still same effect, tried to whipe data/cache etc, still didnt got any effect. Any solution guys?
After you flash the stock ROM, the recovery will be stock as well.. You will not be able to flash roms from here.. For that you will need to flash philz kernel.
Well actually I can install anything via recovery, so installing kernel isnt possible.
Emkarcinos said:
Well actually I can install anything via recovery, so installing kernel isnt possible.
Click to expand...
Click to collapse
You can flash Philz kernel from stock recovery..
nokiamodeln91 said:
You can flash Philz kernel from stock recovery..
Click to expand...
Click to collapse
I have exactly the same problem (and the same situation) as the OP. You cannot flash Philz kernel from stock recovery because the exact same error will pop up.
Right mate I think I got it. You will need to flash an older version of Philz kernel first, and then upgrade. Worked fine for me once I decided to install "05.05.2013 - PhilZ-cwm6 v5.00.4 with CWM 6.0.3.1 based recovery" first.
So last time my phone was stuck on the device name and model number screen. I solved that issue by flashing TWRP using Odin.
but now the phone would not go past the boot screen no matter what I do. I re-flashed CM11 4 times now, factory reseted and wipe cache and dalvik cache. What should I do?
1. change your thread title please. Need help is not really helpful or directs to your issue.
2. what version of TWRP are you using? The official TWRP 2.8.7.0 does not work. Too long to explain why's that. To fix this issue there are some solutions if you flashed the faulty recovery:
- flash Stock ROM again and stay on TWRP 2.8.5.0
- some users fixed this issue by just flashing another recovery or just flashing a stock based custom rom to get their phone working. You still need to change recovery.
In my case I had to flash stock again and flash my preferred recovery again to get my phone working.
maultasche said:
1. change your thread title please. Need help is not really helpful or directs to your issue.
2. what version of TWRP are you using? The official TWRP 2.8.7.0 does not work. Too long to explain why's that. To fix this issue there are some solutions if you flashed the faulty recovery:
- flash Stock ROM again and stay on TWRP 2.8.5.0
- some users fixed this issue by just flashing another recovery or just flashing a stock based custom rom to get their phone working. You still need to change recovery.
In my case I had to flash stock again and flash my preferred recovery again to get my phone working.
Click to expand...
Click to collapse
So I should flash TWRP 2.8.5.0 and flash CM11 again? (because I don't have stock rom for S3 LTE)
Where can I get stock rom fro S3 LTE I can't seem to find it all, I find is firmwares.
Also, a few questions
1) If I give it into my phone carrier (Optus) would they know that it is rooted?
2) If they know it is rooted and with a custom rom and don't fix it for free is it possible to get it fixed by paying money??
The firmware provided by Samsung is the stock ROM I'm talking about
No, since you tried to flash a ROM through the faulty recovery you need to flash either official firmware from Samsung or a custom ROM based on Samsung stock like AMCHA or N4 Elite. I'd recommend to go with official Samsung firmware. After that go to stock recovery (it will come when you flash official firmware), do a factory reset and let the phone boot once. After that you can flash TWRP 2.8.5.0 and flash any ROM you want.
The new recovery from TWRP is too big for the S3. The S3 recovery is a little over 8MB, the new one needs more and messes up partitions etc. You won't be able to mount /system, /data and the recovery can't read your internal partitions as it should. Go with the way I provided. It seems like a lot of work but it's done in a few minutes.
For your two questions: yes and yes. But you can fix that on your own and don't need your operator or Samsung to get your phone fixed.
Thanks a lot for helping. I was scared to death cause if something happened I would've had to start using a old brick Nokia phones
Is it possible that after I flash the stock firmware, my phone still doesn't boot up?
I am basically a level above newbie, so I don't get what is happening. I see tutorials and do what they tell me to do. sometime I get what I am doing sometime I don't
as i said, after flashing stock, go into the recovery and do a factory reset. The phone will boot then
maultasche said:
as i said, after flashing stock, go into the recovery and do a factory reset. The phone will boot then
Click to expand...
Click to collapse
Ok sorry for doubting you! My phone is working now, thanks a lot for your help
Glad it's working now, you're welcome
I have rooted my s3 via odin and now i wont to flash twrp via flashify. Now i have a bootloop on my s3. How can i recover the phone. i am a noob on s3 and i don*t know how i could go into fastbootmode. Please help me.
what S3 do you have? Which recovery did you flash?
maultasche said:
2. what version of TWRP are you using? The official TWRP 2.8.7.0 does not work. Too long to explain why's that. To fix this issue there are some solutions if you flashed the faulty recovery:
- flash Stock ROM again and stay on TWRP 2.8.5.0
- some users fixed this issue by just flashing another recovery or just flashing a stock based custom rom to get their phone working. You still need to change recovery.
In my case I had to flash stock again and flash my preferred recovery again to get my phone working.
Click to expand...
Click to collapse
I had this problem too! Flashed stock rom, then flashed TWRP 2.8.5.0 (I was using 2.8.7.0) and then flashed cyanogenmod 12 and boom it booted and worked!
Thank you very much!
Hey, I just tried rooting my Galaxy Note 5 from Bell, model SM-N920W8, and was unable to boot into recovery when using arter's Philz recovery (though odin reported the flash successful). I tried TWRP afterwards which works as a recovery, however afterrwards my OS stopped booting, resulting in a bootloop before the boot animation. even when trying to flash a new ROM (VIPER 1.4) it bootloops and trying to flash Philz through a zip file also breaks recovery. Is there anything I am doing wrong?
Im going to try another rom, but any suggestions or knowledge as to why i can't get CWM or my System to boot.
Edit: Tried the SpaceX kernel and it seems to be working. Guess arter's kernel and recovery just wont play nice.
Comming from stock ROM every new ROM I'm trying to flash just hangs on a boot logo (animation) of CM for example. Phone was wiped fully several times using TWRP and Cyanogenmod Recovery (/system, /data, /cache, /dalvik-cache).
Any help, please?
what version of twrp are you using? i've had the same issue with twrp 2.8.7.0. It seems to be buggy.
Try another version. 2.8.5.0 works fine for me.
// you might need to / want to / have to restore your phone to stock rom AND recovery first.
Agree with the possibility of TWRP problem.There is a version 3 out now which might work but 2.8.5 is definitely OK. Philz recovery should also work.Make sure these are the correct versions for phone.HTH.
Flash recovery via Odin. Firstly make sure you are using recovery made for our phone. To be honest, I prefer TWRP, and I am using 2.8.5 as I remember. Also, which roms you tried ? I had CM 12.1 and CM 13, and they worked totally fine, but I just loved more stock 4.4.4 so I downgraded.