Hello,
I'm unable to install USB drivers for my LG P880. It used to work some time ago but it doesn't any longer and I haven't figured out yet what could be the reason.
I'm running OmniRom, but experienced the same problems with CGM.
It still works perfectly fine with my PC at work, so I'm pretty sure the phone itseld as well as the cable aren't the problem. Both my home PC and my work PC run Win7 64bit, so this cannot be part of the reason either. I tried all USB slots on my home PC (which all work fine with other devices) but changing the slot didn't help.
I tried several driver packs, especially the original ones from LG (current versions as well as older versions), but also drivers from other sites. My work PC however discoveres them automatically, I don't even have to download drivers manually.
USB Debugging is on, fast charge is off, MTP is on.
I'm running out of ideas. Does anyone know what could make it work again? Thanks in advance!
Check in windows device manager if there are any conflicting drivers installed
I guess sometimes solutins are so simple I just don't think of them... After deinstalling all devices with the little yellow triangle in the device manager it worked like a charm! Thanks a lot!
Related
Hello guys,
To cut a long story short, my cousin wants me to hack is Samsung Galaxy GT i9000.
I rooted his phone in August and it was working perfectly (I play around with my Desire quite a lot) and since then he's tried to get rid of the root to update to official Froyo and something has happened to the USB.
I have tried to install every driver known to man kind to get this phone recognised by 3 laptops and a Desktop PC. 1 XP, 1 Vista and 2 Windows 7. I have been using USB Debug Mode, I've tried it without Debug mode, I've tried every USB slot, I've uninstalled and reinstalled the drivers, kies, even deleted the phone from Device Manager and retried that... and nothing has happened. I can also get in to Download mode but unfortunately the computer still doesn't recognise the USB so therefore I cannot use Odin to flash the phone.
Any help? Cheers
Dan
bigdan35 said:
Hello guys,
To cut a long story short, my cousin wants me to hack is Samsung Galaxy GT i9000.
I rooted his phone in August and it was working perfectly (I play around with my Desire quite a lot) and since then he's tried to get rid of the root to update to official Froyo and something has happened to the USB.
I have tried to install every driver known to man kind to get this phone recognised by 3 laptops and a Desktop PC. 1 XP, 1 Vista and 2 Windows 7. I have been using USB Debug Mode, I've tried it without Debug mode, I've tried every USB slot, I've uninstalled and reinstalled the drivers, kies, even deleted the phone from Device Manager and retried that... and nothing has happened. I can also get in to Download mode but unfortunately the computer still doesn't recognise the USB so therefore I cannot use Odin to flash the phone.
Any help? Cheers
Dan
Click to expand...
Click to collapse
Are you using x86 or x86_64 OS? Both of these drivers are available at: http://code.google.com/p/insanity/downloads/list -- try 'em?
QwertyManiac said:
Are you using x86 or x86_64 OS? Both of these drivers are available at: http://code.google.com/p/insanity/downloads/list -- try 'em?
Click to expand...
Click to collapse
Tried all that already mate, but I tried again just in case, and nope.. No avail whatsoever. This is majorly frustrating now.
I can access Android Recovery (eventhough originally Clockworkmod was on there, but my cousin has done some strange things to this phone) so I think if I can find a verified signed update.zip, I can install something through that no problem, via the Internal SD Card + "apply: update.zip"?
Oh and another thing, when I put the USB Cable in to the Computer and in to the SGS, the option for Charging, Mass Storage, Tethering etc doesn't come up..
Any light whatsoever?
Swyped from my Deoxygenated HTC Desire
Happy new year all,
I have a 8.9 wifi only 32gb amazon.com version 7310.
I can’t get it to connect to my windows PCs (multiple PCs) ANYMORE…I have the drivers installed, but when I plug it in, windows will ask me for the driver and when it tries to install it I get an error (device not installed properly).
Some history:
I have the usb driver (“GT-p7510_USB_Driver_v1_3_2360_0-Escape.exe”) installed from the thread: “[GUIDE]Root, Bootloader Mode, ODIN, Recoveries & NANDROID Backup [7300/7310]”
Fresh off the box I hooked the tab up to my windows XP PC using the above driver and my PC recognized it. Also ODIN connected too.
I installed CWM (“Overcome_CWM_Recovery_v5.1.2.6_P73xx.zip”) from the above thread and rooted the tab using the root file (“Root.zip”) also from the above thread.
After that I couldn’t get the tab to be recognized from my PCs. But ODIN still works.
BTW, I’ve also tried Samsung Kies but it did not work (couldn’t connect to the tab).
I did a hard reset but I still have the same problem!!!
I need to be able to move files from my PC to the tablet as fast as possible. Wifi works but it is slower than usb 2.0!!!
Any help?
Thank you,
Have you tried uninstalling the drivers, restarting, then installing again? Sometimes Windows is a bit iffy. Also, the drivers from Kies are kinda different and tend to conflict (happened to me once). Another tip I'll give you: certain ROMs tend to hate having USB Debugging set to ON at Settings > Applications > Development. They just won't connect through USB while having that set to ON. I found this behavior on Android 3.1 ROMs, haven't had it in the KJ5 firmware and it's been almost two months with it. Best of lucks solving this!
issue solved by re installing the kies
Thank you for your suggestion.
Re installing kies and the latest kies update solved the issue.
Okay a little backstory:
I was on an early version of CM9 but as i am selling the phone i decided to put a more stable version of it on there and downloaded CM7 -stable.
I flashed this in CWM and it worked fine.
I gave it a quick test and noticed all the google apps were missing, most importantly the market. So i booted into recovery and realised i had forgotten to put the zip on the SD card.
I then went into mounts and mounted USB, nothing happened...
From that point onwards the phone would not talk to the PC. even if i booted up into the phone, it would just show it as charging. I could not find any options in the menus for USB options.
After some extensive reading, i tried a few things, none of them had worked. I found a post mentioning some kernels have issues with USB, so i downloaded the recommended one and flashed it in CWM.
After rebooting, CWM was now orange and not blue and the option to flash from external card has gone.
I have also done some digging and there is a good posibility that the kernal that i flashed was for the GT I9000 (which is the american one, right?)
So as it is at the moment:-
I can get into CWM.
I can get into download mode through the 3 button combo.
I can get into download mode using home made jig.
I can boot the phone, but it boot loops.
I can not get the phone to be detected on the pc.
Things i have checked:
Cable will connect other phones.
Tried different cable to be sure.
Phone used to be detected, but downloaded drivers through kies again to be sure.
Closed Kies using task manager.
Nothing is coming up in network connections in device manager when phone is connected.
I'm out of ideas now, so £10 PayPal donation for anyone that comes up with the solution to fix it
If i can get it detected, i can use Odin to flash what i want.
Sounds like a drivers problem. You may need the 'Google driver' developer.android.com/sdk/win-usb.html
When I had bootloops when I first installed CM9 I used heimdall to flash a the stock CM9 kernel. This gave me back CWM.
heimdall flash --kernel 'kernel.zip'
In the commandline.
Thanks for that,
I already had the Google USB drivers from when i installed the SDK to make some apps.
So i then gave Heimdall a try (Graphical Version), it seemed to suffer the same problem.
Reporting "Failed to detect compatible download-mode device."
I seem to remember the GUI saying I didn't have the correct drivers and it downloaded them for me.
The other thing worth a try is changing the USB port and reinstalling the correct drivers on that port.
I've not seen anything like that, it has not asked me for any drivers.
It's like the phone is not connected at all. nothing will detect it, i have even tried it on another PC.
Sorry, I'm not sure what you mean by installing on a port.
Well sometimes changing USB port will allow you to install new drivers. Although if you've tried it in another computer and it doesn't work then changing port may not help.
Does the phone appear in device manager when it's connected and in download mode?
Nope. Not coming up at all in the device manager. It didn't when it was booting fine. And it still doesn't in download mode. :-( I'm thinking the usb connector on the phone might be faulty.
But it was working up until trying to mount the USB in CWM
Sent from my GT-N7000 using XDA App
I don't suppose you have access to a Linux PC do you? Windows USB drivers are notoriously sucky. If you could plug it into a Linux PC and type 'lsusb' at a command line, that would at least show you that the device is really there.
I think I have a spare pc kicking around that I could use. I'll give it a go when I get home tonight.
Sent from my GT-N7000 using XDA App
Remove all the drivers completely from device manager for Samsung, then install fresh drivers and connect the cable when in download mode, hopefully it will recognize it
Are you sure the connector is clean? e.g. maybe there's dust in it.
I had that problem once, the connector was full of fabric fibers from some coat's pocket I had the phone in.
Suggestion 1 (Linux): I installed ubuntu, did not detected anything to even install any drivers. Detected my new phone fine.
Suggestion 2 (Uninstall drivers from device manager): I could not find any drivers named with the name Samsung in there.
Suggestion 3 (Clean port): I have some compressed air that i sprayed inside, it does look pretty clean and will continue to charge but still not connection on the pc.
To install the drivers for heimdall you have to run zdiag from inside the driver folder. Had to do this earlier on, the phone the other appeared as something other than Samsung composite usb or whatever it normally says
I tried this, and it displayed 9 devices after selecting show all. I seemed to recognise all of the items in the menu.
To be sure, I then disconnected the phone and re ran it to see if one of the items were missing, but it was the same number.
I too had problem with the usb connection on my i9000, and I was pretty sure my usb connector on the phone is somewhat damaged since it sometimes can only go to charging mode without being detected by my pc as a usb device. CWM instal is fine but ODIN can only detect the phone without able to flash the rom to the phone. The flashing will always stuck at the message "Setting Up Connection", I waited for 15 minutes and the flashing will eventually died. I retry the odin flash for 40 to 50 times and eventually the flashing will go through one time. Tried heidmall command line and the result is the same.
I have problem with Odin in the past. I bought a new laptop, running Win7 64 bit. Installed Samsung Kies to install the correct USB drivers for the phone. Then made sure that Kies wasn't running in the background. So tried using Odin. Odin was detecting the phone, but it was hanging at initialising connection. Odin was working fine on my old laptop running Win7 32bit. Long story short, I was having a few issues with my new laptop, reinstalled Win7 64bit, now Odin is working fine, have flashed the phone a few times using the new computer.
After flashing which kernel you started facing this problem?
Wipe ur phone,re-flash CM7(flash the nightly 181,it's completely stable),uninstall KIES,uninstall old usb drivers,install these usb drivers http://forum.xda-developers.com/showthread.php?t=961956 ,check that USB storage mode is set as Mass Storage and then connect your phone. Also try enabling/disabling USB debugging
lovedonator said:
After flashing which kernel you started facing this problem?
Wipe ur phone,re-flash CM7(flash the nightly 181,it's completely stable),uninstall KIES,uninstall old usb drivers,install these usb drivers http://forum.xda-developers.com/showthread.php?t=961956 ,check that USB storage mode is set as Mass Storage and then connect your phone. Also try enabling/disabling USB debugging
Click to expand...
Click to collapse
The point at which i could no longer mount the USB was when i selected "mount usb" from CWM. I later installed a new kernal which downgraded my CWM, removing the install from external SD option.
So I cant flash a re-flash a rom unless i can it onto the phone which without the USB working is near impossible.
Xyis said:
The point at which i could no longer mount the USB was when i selected "mount usb" from CWM. I later installed a new kernal which downgraded my CWM, removing the install from external SD option.
So I cant flash a re-flash a rom unless i can it onto the phone which without the USB working is near impossible.
Click to expand...
Click to collapse
You can directly download the ROM on your internal sd using dolphin browser or opera mobile
I can't do that either as the phone is currently boot looping.
Sent from my GT-N7000 using XDA App
Hi..
I am facing an issue with Odin v4.43 .
My Laptop specs are :
USB3.0
HP-pavilion dv6 - 7023Tx (intel i7 3610QM)
OS : Windows 8 -64 bit
.
When i run this application and connect my samsung galaxy S plus device through USB cable, It don't detect Comport nor even displayed "Added" in Message box.
I even installed its 64 bit USB driver but still not. Why?
==================================================================
Whenever i run this application through my old laptop (P4, OS is Windows 7 32 bit and USB2.0 ).
It works and detect the comports and display added in message box.
How could i solve this issue in my new Laptop because i 'll have to leave my old laptop.
Did you already try this:
http://forum.xda-developers.com/showpost.php?p=35227656&postcount=1
hi Gripping,
I installed the same driver on my new laptop but didn't follow the step as mentioned in your refered article.
I try with it then 'll share my experience .
Or this
http://blog.vacs.fr/index.php?post/...ot-detected-problem-on-Android-Samsung-phones
thanks everyone but unfortunately didn't work.
empnetsol said:
thanks everyone but unfortunately didn't work.
Click to expand...
Click to collapse
I was having same problem when I tried to flash with odin (not 4.43). I managed to install the drivers using Heimdall suite 1.3.1. Heimdall comes with drivers folder and a application called zadig inside the drivers folder. It did not work right away but after trail and error it finally showed up as samsung usb driver. sometimes you have to restart your phone to be recognised by your computer. I did on windows 7 too and also I have i9000M. Hopefully will work for you too.
Thanks osterizerble, i have tried many times with different approaches but didn't work.
This is an issue with this machine or might be with 64 bit OS to install its accurate driver completely.
It works smoothly in my old machine without any effort.
It seems Odin V4.43 have the capability to operate through 32-bit systems too.
Thats' the restrictions , i think so.
I have Windows 8 x 64 bit too and I have already successfully flashed a stock Rom to my SGS using Odin.
I used an older version of Odin, I think it's version 1.3.
But my phone wasn't recognized immediately by the PC.
I think it took 2 or 3 times re-starting and re-booting my phone & PC before my phone was finally recognized by Odin.
I used the USB drivers from SamHaLeKe's thread:
http://forum.xda-developers.com/showpost.php?p=11498043&postcount=1
Thansk Gripping and everyone for putting an effort of resolution.
Gripping I am pretty sure,Odin 4.43 will not work.
because i have been tried too mauch with every USB driver with Samsung Kies and after uninstalling it too.
I used SAMSUNG USB Drivers for Mobile Phones (x86 & x64) v1.5.16.0 driver too but it couldn't worked.
Yes Old , I think Odin 3 V1.8 detect Comports and display a message "Added" in Message box.
But i have tried it too, it start flashing and then stuck in no limit of time.
Moreover, i 'll make another try today night again. Hope this may help but i have already tired with it .
It's a good thing nothing happened to your phone when it got stuck in the middle of flashing.
It happened to me twice already, during flashing via Odin, it got stucked and won't continue running. (In my old Windows 7 and recently with Windows 8)
I have no choice but to close Odin and disconnect my phone.
After disconnection, my phone became "hard-bricked". No buttons responding whatsoever.
I was lucky (twice already) to revive my phone and brought it to download mode by doing the following:
1. remove the battery for a few minutes
2. connect the phone to PC via USB cable
3 press the vol down - home button - power buttons and at the same time insert the battery.
After reviving my phone, flashing via Odin became smooth already.
My computer is still giving a same message.
USB drive not recognized and when i come into the device manager, it display 3 wrong things in Other devices.
-> PCI Device
-> Unknown device.
->Unknown device.
empnetsol said:
My computer is still giving a same message.
USB drive not recognized and when i come into the device manager, it display 3 wrong things in Other devices.
-> PCI Device
-> Unknown device.
->Unknown device.
Click to expand...
Click to collapse
Try this may be
http://forum.xda-developers.com/showthread.php?t=2038555
i have already tried with it.
As i Gripping suggest in his first post.
My computer is not recognizing this device.
Moreover, i have tried with solution again but same response.
It says "The best software for your device is already installed".
but i connect my phone, it add three more devices with error as i mentioned in above post.
It shows in device manager "SAMSUNG USB Composite Device".
and when i see the device status
it displays
This device cannot start. Code 10
A request for the USB BOS descriptor failed.
Hello,
since yesterday afer a driver update my MTP doesnt work anymore !
I did everything...deinstalled driver installed driver...sync manager..etc I can put files on it everything ist fine !
The only thing which doesnt work ist MTP, so I cant use fastboot to s off for example ! Toolkit works to flash cwm recovery for example
Please help me
I'm having the same problem. I CAN connect it to my pc, and access the storage on my phone. When I try this on my laptop it will just restart HTC sync a few times.
In my device manager it shows MTP as Other devices. I tried installing a driver for it, but that didn't work out either. I'll be home this afternoon and try to copy the drivers from my pc to my notebook to see if that works out..
Anyone with a real solution?
*Update*
Tried to connect it to someone else his PC here in the office and there it worked.. I guess I'll have to reinstall my Windows. I messed around with it quite a bit... Have some problems with Visual Studio too because of it.
Have you tried connecting it to any other computers?