Hi,
I need help because after 20 hours of trying i gave up.
I've tried like 8 guides of how to update the rom and it always failed.
I tried 10+ rom versions and put them on sd card and it fails with "status 7" or just "aborted" with no reason.
i'm using cwm 6.0.3.0, and when i try to update it using odin it also fail.
also when i try to load the original stock rom for my country it fails with no reason just "aborted".
I also tried fastboot in download mode but it wont recognize my device even with correct drivers.
now the worst problem is that when i restore it to the previews backup it works but the device is unusable, stuck after one minute.
I'm really frustrated and i hop to get some help here.
Thanks
Download KitKat ROM, PA Gapps and most recent SuperSU v1.94 http://download.chainfire.eu/supersu
+++ the 1&Only guide +++
- Download Raw kernel r4 r3p2 test > http://ge.tt/m/4wso5Hx
- Flash Raw kernel in your old recovery
- Go to advanced > choose reboot recovery! (Not System)
- Now in Raw kernel recovery CWM 6.0.4.4, you can
--- Flash KitKat ROM
--- Flash PA Gapps (full modular recommended)
--- Flash SuperSU
- Wipe data / factory reset
- Reboot
> You're on KitKat.
Status 7 > you need a recovery which is full SELinux compatible.
AA1973 said:
- Flash Raw kernel in your old recovery
Click to expand...
Click to collapse
Should i do it within bootloader or odin?
***
tried to flash raw within recovery mode and got:
"E:Can't open /sdcard/raw_kernel_r3p2_test.zip
(bad)
Installation aborted."
From which recovery are you flashing right now?
Screenshot of about phone information, please?
Are you on stock recovery 3e right now.
Some more details of your exact setup, please.
Or bad download of raw kernel. Can you open the zip file?
Ok solved it,
Thanks man!
How?
AA1973 said:
How?
Click to expand...
Click to collapse
I solved my last problem by copying the files to the sd card again.
i'm using "omni-4.4.2-20140328-n7000-NIGHTLY" rom right now
Got stuck trying to update to kitkat (me too)
Dear Experts,
I believe my case is very similar to that starting this thread so I thought I'd just continue (hopefully not violating rules).
My Android was ICS stock version and my wish was to upgrade to KitKat.
(I did not make any backup.)
I followed these steps:
I rooted my system and installed PhilZ Touch 3 CWM Base version 6.0.2.7.
Then I proceeded to the upgrade following this guide:
"Update Galaxy Note N7000 to Android 4.4.2 KitKat Lightning ROM"
[sorry, am not allowed yet to insert ext links]
Step 10 resulted for me in:
Installing update...
set_metadata_recursive: some changes failed
E:Error in /sdcard/N7000-STABLEv1.zip
(Status 7)
Installation aborted
I retried step 10 using SlimKat - N7000 but with the same (Status 7) result.
This CWM seems ready further actions although it keeps looping even upon switch-offs (needed to remove battery to switch off effectively).
I hope all details have been given.
Please do advise me about further steps.
Thank you,
R.
raphele said:
Dear Experts,
I believe my case is very similar to that starting this thread so I thought I'd just continue (hopefully not violating rules).
My Android was ICS stock version and my wish was to upgrade to KitKat.
(I did not make any backup.)
I followed these steps:
I rooted my system and installed PhilZ Touch 3 CWM Base version 6.0.2.7.
Then I proceeded to the upgrade following this guide:
"Update Galaxy Note N7000 to Android 4.4.2 KitKat Lightning ROM"
[sorry, am not allowed yet to insert ext links]
Step 10 resulted for me in:
Installing update...
set_metadata_recursive: some changes failed
E:Error in /sdcard/N7000-STABLEv1.zip
(Status 7)
Installation aborted
I retried step 10 using SlimKat - N7000 but with the same (Status 7) result.
This CWM seems ready further actions although it keeps looping even upon switch-offs (needed to remove battery to switch off effectively).
I hope all details have been given.
Please do advise me about further steps.
Thank you,
R.
Click to expand...
Click to collapse
Simple download the latest philz touch, flash it with recovery reboot your recovery and flash the rom u desired. Your recovery is outdated hence status seven error
Sent from my GT-I9300 using XDA Premium 4 mobile app
Thank you Nic2215 and hello every helping soul!
I downloaded the latest file, MD5 checked OK.
Was not sure to be able to boot into recovery but kept the three buttons pressed while inserting the battery (current way to switch on) but I believe I succeeded in that.
Later I just chose boot into ecovery from within CWM menu.
Anyway it's been no success for me:
E:Error in /sdcard/philz_touch_6.25.0-n7000.zip
(Status 7)
Installation aborted
BTW I noticed one detail - in the About section of CWM it reads among other lines:
Build version: 3.99 - i9100
I am quite sure I'd followed all rooting steps correctly:
http://forum.xda-developers.com/showthread.php?t=2217840
and picked a zip file compatible with N7000 and my kernel XXLRI:
http://forum.xda-developers.com/showthread.php?t=1901191
-> PhilZ-cwm6 v3.99 with CWM 6.0.2.7 based recovery
-> PhilZ-cwm6-XXLRI-AUT-v3.99
Anybody able to help?
R.
You must have CWM 6.0.<b>4.4</b> or higher, which is fully SELinux compatible for KitKat.<br />
Just flash Raw kernel r4, reboot in recovery (of raw kernel ) and then do your flash and wipes.<br />
You can't simply install a newer recovery on our device, as kernel and recovery are bound together, but ...THIS IS BASIC KNOWLEDGE FOR OUR DEVICE!!! <br />
#fail²<br/>
I appreciate your help.
Following your advice I found this resource:
-> [KERNEL][AOSP][10 Dec.] Raw Kernel r5 -- simple&fast kernel -- some KitKat love
but I can see:
Download :
r5 for KK4.4 (announce)
r4 for JB4.3 (announce)
Just would like to make sure that r4 - not r5 - fits my needs towards KitKat.
Suppose r4, then please assure me that my plan is correct:
1. Download raw_kernel_r4_j43.zip
2. On N7000 VolUp+Home+Pwr -> Install Zip -> Choose zip from sdcard -> raw_kernel_r4_j43.zip
3. Advanced -> Reboot Recovery
4. -> Install Zip -> Choose zip from sdcard -> N7000-STABLEv1.zip (Lightning Rom Android 4.4.2 ROM )
Please excuse my basic questions - I just realize I may not allow myself further mistakes. Certainly did not mean to offend or irritate anybody here.
Regards,
R.
raphele said:
I appreciate your help.
Following your advice I found this resource:
-> [KERNEL][AOSP][10 Dec.] Raw Kernel r5 -- simple&fast kernel -- some KitKat love
but I can see:
Download :
r5 for KK4.4 (announce)
r4 for JB4.3 (announce)
Just would like to make sure that r4 - not r5 - fits my needs towards KitKat.
Suppose r4, then please assure me that my plan is correct:
1. Download raw_kernel_r4_j43.zip
2. On N7000 VolUp+Home+Pwr -> Install Zip -> Choose zip from sdcard -> raw_kernel_r4_j43.zip
3. Advanced -> Reboot Recovery
4. -> Install Zip -> Choose zip from sdcard -> N7000-STABLEv1.zip (Lightning Rom Android 4.4.2 ROM )
Please excuse my basic questions - I just realize I may not allow myself further mistakes. Certainly did not mean to offend or irritate anybody here.
Regards,
R.
Click to expand...
Click to collapse
You may download either r4 or r5,r4 is cwm and r5is twrp. I would suggest to go with r4 and then flash r4 first, reboot recovery, do the wipes and then flash rom with gapps (or without) and superSU.
Sent from my GT-N7000 using Tapatalk
Try Forest kernel
Nic2215 said:
Simple download the latest philz touch, flash it with recovery reboot your recovery and flash the rom u desired. Your recovery is outdated hence status seven error
Sent from my GT-I9300 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Try to flash forest kernal first then reboot recovery then flash the zip
AA1973 said:
You must have CWM 6.0.<b>4.4</b> or higher, which is fully SELinux compatible for KitKat.<br />
Just flash Raw kernel r4, reboot in recovery (of raw kernel ) and then do your flash and wipes.<br />
You can't simply install a newer recovery on our device, as kernel and recovery are bound together, but ...THIS IS BASIC KNOWLEDGE FOR OUR DEVICE!!! <br />
#fail²<br/>
Click to expand...
Click to collapse
do we need to make partition on sd card for flashing KK cusrom?
cause i got problem with this, my storage can not read in file manager after flash CarbonRom
Hello,
I am very happy because I have my Nexus One back after borring it to my father. I really want to install Kitkat. However, I couldnt because I have this blocking error message when installing any zip ROM : symlink : some symlinks failed
I did not find any solution on Internet
For information :
o I have the same issue with ClockWork recovery and TWRP 2.6.0.0
o I tried to un-mount /cache
o I can install CyanogenMod 7 (Android 2.3.3) without issue with the same method
o I used BlackRose and resized system to 250 MB and cache to 16 MB
Is there someone who want and can help me ?
Thank you in advance
Up
Nobody can help me on this topic ? I will never be able to jump to kitkat ?
The exact same issue here for any ROM except CM7.
BlackRose S-OFF here and CWM Recovery. Tried also with 4EXT and TWRP, but same and no clue why it always do :
"Insallation Aborted."
Help Please?
Ok...a few things I recommend:
- Use 4EXT recovery...it is the best and has a touch interface as well
- Use the latest Evervolv nightly build for Nexus One...they are on 4.4.4
I am using the above with System at 220, Cache 8, Rest data, and it works really well.
Symlinks failed means there is not enough system memory to install the ROM.
Also, for Google apps us the slim Google Apps from http://forum.xda-developers.com/showthread.php?t=2265564.
Hope this helps.
@viditbhargava:
Thanks for helping you. I still have the same issue and 2 questions :
o You think it is an issue with system space. Your system has 220 MB, mine has 250 MB. Why does it not work on my phone ?
o You suggest the last beta of Evervolv nightly build. According to the "official" page (http://evervolv.com/devices/passion), the last version is 4.0. Where can we found the KitKat version ?
Thanks again.
Hey,
Sorry taking too long to reply.
I forgot to suggest you something else which is essential and very helpful.
http://forum.xda-developers.com/showthread.php?t=2265564
The Slim Factory which removes unnecessary files and drastically reduces the size of the installer zip. There is an automated script written found in this post: http://forum.xda-developers.com/showthread.php?p=41251249#post41251249
As for the last Kitkat nightly that Evervolv released for Nexus One, I have the installer zip but I can't upload it here. You could try and post on their IRC asking them to enable the download of the last nightly.
Hope this helps.
I downloaded framework and app here but everytime I flash the framework it shows ' error executing updater binary in zip'. However I can flash other zip like kernel. Could someone do me a faver?
Nick Huang said:
I downloaded framework and app here but everytime I flash the framework it shows ' error executing updater binary in zip'. However I can flash other zip like kernel. Could someone do me a faver?
Click to expand...
Click to collapse
I would guess that you need to use an older version of TWRP - the latest builds are a bit ropey.
Same issue here , on BlissPop 3.2 07 May 2015 Version with Blisspop's Stock Kernel and TWRP 2.8.6.0 -_- (For OnePlus One)
Hello guys, i search on web and i find a method for working XPOSED on Android 4.4.4 now.
My Device: A11UL - HTC Desire 510 EU 64Bit
Pictures on Attachment
- All Modules under KitKat working(Sense Toolbox,.....).
- Xposed older Version
How to install:
Download Xposed APK & .ZIP from Attachment
GoTo Settings > Security > tick Unknown Source
Install XPOSED APK
Boot into Recovery
Install ZIP
Reboot & Done
How to Remove:
Boot into Recovery
Install Xposed Disabler
Reboot
Warning: I am not responsible for bricked phones or other things!
Can you reupload the files please ?
Why, the Files are Download able
Hy man
I have some thing to ask you if you want
Can you share with me your android 4.4.4,i have to htc desire 510 EU 64
hi
first excuse my English, because using google translator
my name is David, I have an OEM radio for Ford Focus, a few days ago the radio does not start.
I can only enter the recovery, but I failed to install the files:
Recovery system v4.4.43
E:1 parse errors
handle script error! ignore...
installation mcucfg start.
installation mcucfg aborted.
installation keycfg start.
installation mcukey aborted.
installation mcuimg start.
installation mcuimg success..
and it stays off
the last time I see the options could see this:
MCU version:
MTCB-KGL4-V2.22
Jan 19 2015 10:31:20
Model number
S07
S/N
000D18A15278
Kernel version
3.0.36+
[email protected] #555
Wed May 14 03:45:57 PDT 2014
Build number
rk30sdk-eng4.2.2 20140514. 19:44:15
I've also tried installing the ROM:
update_5_1_1_FUSE_1024X600_RK3188_01_MAL_07_06_2016_MTCB
but also it fails ...
can you help me? tanks!