First You Need A Stock Frimware Download it From XDA.
Note:- Some of The Frimware Needs Wiping After Flashing .if You See Properly with Frimware Developer Write (Non-Wipe) And (Wipe)
"NON-WIPE" means no need Of Wiping After Flashing And "WIPE" means need Wiping after Flashing
------------------------------------------------------>
Open ODIN in laptop/desktop what you use
------------------------------------------------------>
Take Your device into ODIN mode
By pressing combo of three buttons
power button + home key + volume down
------------------------------------------------------>
You see a warning message
Than Hit Vol. Up Now You See Your Device In "Download Mode"
------------------------------------------------------>
connect your device with laptop/desktop what you use
choose ur specific frimware where u place in ur laptop/deskyop All Files present in one folder you just have to locate through odin whereyou add and select it
IN pda Section select this file PDA_S6102_XXXX.tar.md5
IN phone Section select this file MODEM_S6102_XXXX.tar.md5
IN csc Section select this file CSC_S6102_XXXX.tar.md5
------------------------------------------------------>
----> Flashing start
------------------------------------------------------>
When You See Boot Logo After Flashing Remove Data Cable
your device automatically boot after flashing
Than unplug cable when boots up,Go to recovery mode again by three Combo Button Fastly And Wipe Data And Wipe cache
Now Reboot your Device
done ->
Credits - To Me Kartik [email protected]
"If You Want To Know More About ODIN , FRIMWARES And Other Stuffs Related With it. Click on This Link"
Thread Link :- http://forum.xda-developers.com/showthread.php?t=2700169
Thanks To marcussmith2626.
you do realise there are full instructions at the start of all my firmware threads so is there any need for this?
marcussmith2626 said:
you do realise there are full instructions at the start of all my firmware threads so is there any need for this?
Click to expand...
Click to collapse
On request of users i write it. They Dont know how to use odin. Even they dont know which frimware needs wiping which not. So i just write whole thing in shot form that users know properly whats the matter.
kartik verma said:
On request of users i write it. They Dont know how to use odin. Even they dont know which frimware needs wiping which not. So i just write whole thing in shot form that users know properly whats the matter.
Click to expand...
Click to collapse
actually the bit about wiping is wrong
if it says wipe in the file name on all my firmwares then generally you do not need to wipe - wipe means that it is a wipe pack and will attempt to wipe everything before flashing
and like I said full instructions are given on my firmware thread including to wipe data if it bootloops after flashing
duos 6102 firmware can be found http://forum.xda-developers.com/showthread.php?t=2700169 with instructions
marcussmith2626 said:
actually the bit about wiping is wrong
if it says wipe in the file name on all my firmwares then generally you do not need to wipe - wipe means that it is a wipe pack and will attempt to wipe everything before flashing
and like I said full instructions are given on my firmware thread including to wipe data if it bootloops after flashing
duos 6102 firmware can be found http://forum.xda-developers.com/showthread.php?t=2700169 with instructions
Click to expand...
Click to collapse
I also know about wiping and all. I use manoranjan frimware. In one frimware after flashing it gives cant mount data and bla bla. Need a factory reset after flashing when it going to recovery mode it self after this we have to again enter in recovery mode and give a factory reset manually. Its in case of non wipe frimware. If m not give a factory reset than my device boot again and again. And every 1 knows if we flash new frimware pre installed android software removed when flashing.
Sorry if fhis post cause any type of problem.
kartik verma said:
I also know about wiping and all. I use manoranjan frimware. In one frimware after flashing it gives cant mount data and bla bla. Need a factory reset after flashing when it going to recovery mode it self after this we have to again enter in recovery mode and give a factory reset manually. Its in case of non wipe frimware. If m not give a factory reset than my device boot again and again. And every 1 knows if we flash new frimware pre installed android software removed when flashing.
Sorry if fhis post cause any type of problem.
Click to expand...
Click to collapse
thats probably because you changed your file system to ext and when you flashed the firmware it wasnt a wipe pack
All my firmware I download from sammobile and split myself with splitfus2 into a wipe pack - All the firmware on my thread are the latest firmware for duos and are all wipe packs although if you experience bootloops just wipe data
Theres no problem creating threads but all what you have writting is on my firmware thread also with links to the samsung usb drivers which are also required and also other threads on how to use odin is easily available
marcussmith2626 said:
thats probably because you changed your file system to ext and when you flashed the firmware it wasnt a wipe pack
All my firmware I download from sammobile and split myself with splitfus2 into a wipe pack - All the firmware on my thread are the latest firmware for duos and are all wipe packs although if you experience bootloops just wipe data
Theres no problem creating threads but all what you have writting is on my firmware thread also with links to the samsung usb drivers which are also required and also other threads on how to use odin is easily available
Click to expand...
Click to collapse
So i have to mention ur thread here . M i right sir. And thanks for sharing more info.
kartik verma said:
So i have to mention ur thread here . M i right sir. And thanks for sharing more info.
Click to expand...
Click to collapse
no you dont have to mention my thread as you havent used anything from it but it maybe useful to link to a thread that contains all the firmware
Is ur thread present in duos section becoz m not find it.
kartik verma said:
Is ur thread present in duos section becoz m not find it.
Click to expand...
Click to collapse
I gave you the link to it a few posts up - its
http://forum.xda-developers.com/showthread.php?t=2700169
marcussmith2626 said:
I gave you the link to it a few posts up - its
http://forum.xda-developers.com/showthread.php?t=2700169
Click to expand...
Click to collapse
:crying: Sir,I have one Request Can you Provide me phone.tar.md5 file of DDMF4 FRIMWARE Becoz m not able to Download Whole Frimware. plss
kartik verma said:
:crying: Sir,I have one Request Can you Provide me phone.tar.md5 file of DDMF4 FRIMWARE Becoz m not able to Download Whole Frimware. plss
Click to expand...
Click to collapse
do you mean the modem file or the pda file?
modem file in the attachment
marcussmith2626 said:
do you mean the modem file or the pda file?
modem file in the attachment
Click to expand...
Click to collapse
Thanku very much sir,for baseband file now my device have latest baseband DDMF4 . Previously m stucks on ddlg1 baseband.
Related
My Galaxy Ace is stuck in a reboot loop after trying to flash 2.3.6 onto it, when it had 2.3.5 on it previously.
I've used ODIN and no matter what firmware I try to flash onto it, it just goes into a reboot loop.
Any idea how to fix it?
Did you try to do a wipe?
vkanamekuran said:
Did you try to do a wipe?
Click to expand...
Click to collapse
A wipe worked! Thanks!
how to do a wipe please tell
mor1228 said:
how to do a wipe please tell
Click to expand...
Click to collapse
press down home button and then power on phone ...--> you will enter into recovery mode .
select wipe with help of volume keys and there you go out of bootloop
My Galaxy Ace is also in some sorta reboot loop.
Everything was working fine with it (phone is rooted and CWM installed) until I did a phone reset because I was giving the phone to my gf. After doing this the phone reboots, the blue samsung logo plays (without sound) and then repeats ad-infinitum. I can get into recovery mode and download mode ok and I've tried wipe and even restored a CWM backup (it says it was successful) but the phone just keeps rebooting. I can see the phone in odin but I've never tried to flash anything onto it and quite frankly I'm unsure whether it would just make things worse (if it needs to go back to Samsung for repair). Any help would be appreciated...
If you have cwm ..why dont you download some custom rom like cm7and flash it ..that would bring your phone back to life ...then you can downgrade to stock rom if you want ...and btw in cwm try cache partition , clear data /factory reset and clear dalvik cache ..see if it boots after you do this ..
Sent from my SGA rocking CM7.2 by vo-1 + all-in-one script
when i always flash by odin or by cwm i always do wipe , wipe cache and wipe dalvik, this helps me everytime
I managed to flash a firmware from samfirmware and it fixed the reboot.
Now my issue is when I connect to Kies, it says there's an updated firmware for the phone but it fails every attempt to install it. I went back to samfirmware and found this firmware: S5830ZSKPD ## but when I download and extract it there's only 1 x MD5 file and 1 x DLL file?! The other firmware had the 4 or 5 files needed to include in Odin... any ideas guys?
I think its a "one package file " ..I forgot the correct name but there is some option like that in odin ..dont worry it contains all the required files ..and if you are scared to do it then go to you tube ..there are many tutorials showing it then...
Sent from my SGA rocking CM7.2 by vo-1 + all-in-one script
rogers4759 said:
I think its a "one package file " ..I forgot the correct name but there is some option like that in odin ..dont worry it contains all the required files ..and if you are scared to do it then go to you tube ..there are many tutorials showing it then...
Click to expand...
Click to collapse
Yep, that's exactly what it was, thanks again.
Unfortunately with this firmware, Kies doesn't recognise it and provides no info.
I flashed back to the older firmware... I'll just have to keep experimenting I guess.
for flashing with odin --> http://forum.xda-developers.com/showthread.php?t=1225493
many people says, don't upgrade the firmware with KIES.
dianpadi said:
for flashing with odin --> http://forum.xda-developers.com/showthread.php?t=1225493
many people says, don't upgrade the firmware with KIES.
Click to expand...
Click to collapse
Well I could flash it with Odin if I had the firmware but I don't.
It appears it's not available on SamFirmware.com
Do you know where I can download the following firmware?
PDA:KPD / PHONE:KPD / CSC:KPC (THL)
Thanks
Lol I cant understand those firmwares ..can you tell me which version of android you want like 2.3.4/2.3.5/2.3.6 ...then ill be able to help you wanr
Sent from my SGA rocking CM7.2 by vo-1 + all-in-one script
Thanks anyway but I managed to find the firmware online and flashed it using Odin.
Now Kies says I'm using the latest which is a good start : )
Now I just need to find a way to root my SGS2 GT-I9100T
U can try a custom ROM from the Developer's forums here.
I also once stucked in the Reboot Loop..............
But then I installed a custom or if you want features from a official Rom, you can install Stock Based custom ROm from the Developer forums of Galaxy Ace. Really good Rom have been made by the developers
In the chance that someone else is looking for this latest OEM firmware update:
PDA:KPD / PHONE:KPD / CSC:KPC (THL)
It can be downloaded from: http://translate.googleusercontent....flgljh&usg=ALkJrhiMpHV83dugh4RGwhKpyjIrYIgn2Q
It is in "one part file" format and can be flashed using Odin.
whatever may be the problem ......just rem to keep a backup of ur previously used rom and just flash it with cwm...
Progress?
Sent from my GT-S5830 using xda premium
Read all the previous no way out loop boot
Hi every body
i have installed cwm, custum firmware, every thing goes ok
tryed to use simlock remover, no message, turned off the Galaxy Ace but after rebooting, a continuous loop boot, no acces to recovery, flashing on wath ever firmware version with odin success but on rebooting the loop is back, help please.
PS : while flasing with odin : "big partition size!!"
hello. first want to apologize for the English they speak. is translated by google ...
I have a gt-N7000 phone that crashes in Odin to factoryfs.img i don't know what i need to make
I tried to make some updates by revovery mode and now I can not do anything ... Can you help me please ? I have some pictures
N7000XXLA1_N7000OXALA1_OXA
odin 3 v1.85
Reflesh with pitfile, at own risk. Get it from Dr Ketans thread in sticky section development
By any chance did you wipe or factory reset when on ICS?
Sent from my GT-N7000 using Tapatalk 2
baz77 said:
Reflesh with pitfile, at own risk. Get it from Dr Ketans thread in sticky section development
By any chance did you wipe or factory reset when on ICS?
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
yes i make wipe / recovery mode on ics...
Try flashing the KL3 base....it always works for me...
Rulinglionadi said:
Try flashing the KL3 base....it always works for me...
Click to expand...
Click to collapse
i try now 10x. i hope it`s work... i come back
not work still freez... !
I think I have problems with nand flash
I try to put a firmware from the 8xx MB (GB stock) freezes over. see de photo.
I try to put one of 9xx MB ( ICS stock ) freezes last two green lines.
soryy for my english ...!
Did you make "USB Debugging" on
dsmas said:
Did you make "USB Debugging" on
Click to expand...
Click to collapse
yes but right now the software is down... i try 3 different firmware stock flash with odin and nothig but I managed to get into recovery mode and when I wipe or update or else I try, crashes and resets I did try diferren phase with pit files, i try reset all with JIG ( homemade by me and working) ... i think i need one small rom 500 mb other something like that
Do a factory reset....with cmw...or remove your battery once...and then try the kl3 base...and run Odin in Administrator mode....select the base from in PDA....and pray tat it works
Rulinglionadi said:
Do a factory reset....with cmw...or remove your battery once...and then try the kl3 base...and run Odin in Administrator mode....select the base from in PDA....and pray tat it works
Click to expand...
Click to collapse
NOT WORKS..... any ideea ?
danieldumitru said:
NOT WORKS..... any ideea ?
Click to expand...
Click to collapse
Yours looks like already damage some partitions due to the EMMC bug, wiping under ICS buggy kernel.
So you should look for help from warranty service if you can. Or do repartition using custom PIT file or manual method, although will loose some space of sdcard. The guide is in the thread below:
http://forum.xda-developers.com/showthread.php?t=1661590
Hope it helps.
forest1971 said:
Yours looks like already damage some partitions due to the EMMC bug, wiping under ICS buggy kernel.
So you should look for help from warranty service if you can. Or do repartition using custom PIT file or manual method, although will loose some space of sdcard. The guide is in the thread below:
http://forum.xda-developers.com/showthread.php?t=1661590
Hope it helps.
Click to expand...
Click to collapse
YES i think this is my problem now i try to fix .... THANK YOU so much for help !!
Hope it work out well for you. cheers.
forest1971 said:
Hope it work out well for you. cheers.
Click to expand...
Click to collapse
not work 100 % :
1. i try to repartition and its ok but when i flash 4pda_kelner i have the triangle yellow. ok... in recovery mode i make wipe data cache system, i install zip KingDroid_ICS_NoteMania_Edition_v3.0.zip OK. when is i make restart phone and when is loading the software ( bootlogo ) automaticaly is restart and still freez samsung logo with triangle yellow ...
2. I found the solution to make it disappear triangle count in binary mode download is no .... but when I install file 2 ZSLPF recovery is a version that can not install any version of firmware in recovery mode (install sdcard zip file ..bla bla ) ...
all I need is help me with some versions of good kelner that I can manage to install the firmware in recovery mode ...
I want to mention is that when trying to install file or 2.tar 1.tar ITS Odin stuck to spl files
sorry for my english please be patient
You can install custom roms which is packed in .zip format as suggested in the guide. If one rom not wirk, try a secobd one. See how it goes. Btw, it always useful if you post partition table so we can see if it looks right.
About kernel. Should use abyssnote, search in the forum you will find it.
danieldumitru said:
hello. first want to apologize for the English they speak. is translated by google ...
I have a gt-N7000 phone that crashes in Odin to factoryfs.img i don't know what i need to make
I tried to make some updates by revovery mode and now I can not do anything ... Can you help me please ? I have some pictures
N7000XXLA1_N7000OXALA1_OXA
odin 3 v1.85
Click to expand...
Click to collapse
You can send this file along with any other pit stock rom of your choice aconcelho use LPY
PIT:
http://www.mediafire.com/?x5lkvtwg5s1j4ov
kleidione said:
You can send this file along with any other pit stock rom of your choice aconcelho use LPY
PIT:
http://www.mediafire.com/?x5lkvtwg5s1j4ov
Click to expand...
Click to collapse
If possible you should give the source where the PIT file is from. If it is custom PIT file from hg42 you should mention it, or from someone or you made it? Using a blind PIT file is dangerous and can lead to hard-brick.
Hello hopeless android users!
There are some threads about unbricking, but some phone has been bricked massively, and we can't do a normal flashing (I mean the samfirmware and other pda roms).
For example when you get one of these massages in odin:
http://pastebin.com/byiC7D2v
or this:
http://pastebin.com/f6Wh1J7x
When we got in this king of trouble, we can do another method.
What do we need?
Odin 1.85
And a multi-package firmware - http://forum.xda-developers.com/showthread.php?t=1822109 (by Domnic79)
Unpack s5830idownloader.zip
Open Odin (If windows 7, than right click -> Open as administrator)
Do not check repartition!!! Do not use .pit file!!!
Boot your phone in download mode! (Press Vol. up + Vol. down, than press power)
Connect your phone to your PC (Don't connect to the front USB, if Desktop)
Unpack firmware.zip
Put PDA to PDA, PHONE to MODEM and CSC to CSC
Press start, and wait...
When you connect your phone, you should see, that odin recognise it!
I hope it was helpful!
Don't press thanks just for me! One for Domnic79 too!
LINKS (I couldn't upload to xda...something wrong)
Firmware - DOWNLOAD
S5830i OdinDOWNLOAD
I recommend adding [GUIDE] to your post title
If you want a current firmware, use splitfus2 with command "splitfus2 -w <firmware tar file>", it will split the package for you. Then flash without repartition and without pit.
When I bricked my 5830i I would still get bootloop after flashing a completely new firmware, so I flashed the rafaelbaugis CWM kernel, formatted /system, /data, /cache and flashed a custom ROM. That unbricked my device.
ZakooZ said:
I recommend adding [GUIDE] to your post title
If you want a current firmware, use splitfus2 with command "splitfus2 -w <firmware tar file>", it will split the package for you. Then flash without repartition and without pit.
When I bricked my 5830i I would still get bootloop after flashing a completely new firmware, so I flashed the rafaelbaugis CWM kernel, formatted /system, /data, /cache and flashed a custom ROM. That unbricked my device.
Click to expand...
Click to collapse
Yes...sometimes a kernel can solve problem too, but when I bricked my phone, just this helped...weird...
The stickies already cover this.
coda00 said:
Yes...sometimes a kernel can solve problem too, but when I bricked my phone, just this helped...weird...
Click to expand...
Click to collapse
No need for multipackage
We have Odin3v3.07 which can flash single package file
Bye Bye splitfus
iamareebjamal said:
No need for multipackage
We have Odin3v3.07 which can flash single package file
Bye Bye splitfus
Click to expand...
Click to collapse
Quick question : i wanna know does one package wipe user data?
uchihachi said:
Quick question : i wanna know does one package wipe user data?
Click to expand...
Click to collapse
One packages from sammobile doesn't remove data.
Tapatalk:
My banana wrote that!
Android-fany said:
One packages from sammobile doesn't remove data.
Tapatalk:
My banana wrote that!
Click to expand...
Click to collapse
Thanks for the answer.
[TUTORIAL] Unbrick/Firmware restore | Flash GUIDE | ROM List & REVIEWS [30/10/2012]
I think my threat has already covered this.........
feetsonfire said:
I think my threat has already covered this.........
Click to expand...
Click to collapse
Can you please give links of your THREAT?
iamareebjamal said:
No need for multipackage
We have Odin3v3.07 which can flash single package file
Bye Bye splitfus
Click to expand...
Click to collapse
Yes, but V3.07 sometimes doesn't recognise s5830i, if you have got all drivers too.
thank you ....
yu358756554 said:
thank you ....
Click to expand...
Click to collapse
At your service
[TUTORIAL] Unbrick/Firmware restore | Flash GUIDE | ROM List & REVIEWS [30/10/2012]
iamareebjamal said:
Can you please give links of your THREAT?
Click to expand...
Click to collapse
my pinned unbrick tutorial...... and what do u mean by massive brick.....
feetsonfire said:
my pinned unbrick tutorial...... and what do u mean by massive brick.....
Click to expand...
Click to collapse
Some brick isn't as hard, that you couldn't solve it by a simply wipe, or a rom flash.
Your guide didn't help.
My phone is rebooting and rebooting.
The other guide also didn't help!
http://forum.xda-developers.com/showthread.php?t=1840645
Did you do everything as these were written?
So did you use odin 1.85?
Did Odin Write, that your flash was Successful?
If yes:
How did u brick?
Have you got S530i?
The i at the end is important.
Munchkin86 said:
Your guide didn't help.
My phone is rebooting and rebooting.
The other guide also didn't help!
http://forum.xda-developers.com/showthread.php?t=1840645
Click to expand...
Click to collapse
Sometimes it happens with me too. Just go to recovery and factory reset and wipe cache. It helps in my case.
Hello,
I want to flash stock firmware from SamMobile, but my country is not there on the list,
So which firmware should I choose? I don't want to mess up things like modem or IMEI..
Thanks
verynoob said:
Hello,
I want to flash stock firmware from SamMobile, but my country is not there on the list,
So which firmware should I choose? I don't want to mess up things like modem or IMEI..
Thanks
Click to expand...
Click to collapse
If you use Odin you won't lose your IMEI number but yes you'll change your modem... flashing a full package might change it, but I'm not sure. In full package roms "PHONE" file contains modem's data... I've never tried to flash a rom without this file...or simply changing this file but it could be a posibility :S:S:S
Where are you from? Maybe we could find a flashable CWM modem file
Viper The Ripper said:
If you use Odin you won't lose your IMEI number but yes you'll change your modem... flashing a full package might change it, but I'm not sure. In full package roms "PHONE" file contains modem's data... I've never tried to flash a rom without this file...or simply changing this file but it could be a posibility :S:S:S
Where are you from? Maybe we could find a flashable CWM modem file
Click to expand...
Click to collapse
thanks,
so what exactly is this modem? I mean, isn't the S5830 an international phone? so why does it need to have so many different modem types..
can I somehow save my current modem and install it later after flashing stock firmware?
verynoob said:
thanks,
so what exactly is this modem? I mean, isn't the S5830 an international phone? so why does it need to have so many different modem types..
can I somehow save my current modem and install it later after flashing stock firmware?
Click to expand...
Click to collapse
Modem file contains data related with wireless connectivity, radio, network communications...
Yes you can to backup your current modem data, creating a flashable zip via CWM
Here it is the script
BACK UP YOUR ROM'S MODEM
1. Flash this zip via CWM
2. When the script finish you'll get a flashable zip in /sdcard/Backup_Modem with your current modem files
Original Thread by Lovetz
Viper The Ripper said:
Modem file contains data related with wireless connectivity, radio, network communications...
Yes you can to backup your current modem data, creating a flashable zip via CWM
Here it is the script
BACK UP YOUR ROM'S MODEM
1. Flash this zip via CWM
2. When the script finish you'll get a flashable zip in /sdcard/Backup_Modem with your current modem files
Original Thread by Lovetz
Click to expand...
Click to collapse
Thanks
Btw, I've done everything done by the instructions and now I am in a bootloop with Samsung logo..
I put the .OPS file , and checked "One Package" , chose the ".tar.md5" firmware that I downloaded from SamMobile, and I am stuck in samsung's logo
verynoob said:
Thanks
Btw, I've done everything done by the instructions and now I am in a bootloop with Samsung logo..
I put the .OPS file , and checked "One Package" , chose the ".tar.md5" firmware that I downloaded from SamMobile, and I am stuck in samsung's logo
Click to expand...
Click to collapse
Always you flash a stock rom via Odin, you'll need to boot into stock recovery and do wipe data/factory reset and wipe cache partition to avoid the bootloop.
Then enjoy!
Viper The Ripper said:
Always you flash a stock rom via Odin, you'll need to boot into stock recovery and do wipe data/factory reset and wipe cache partition to avoid the bootloop.
Then enjoy!
Click to expand...
Click to collapse
Omg I did that before watching your comment and I came here to say " nvm it worked after I did factory reset and wiped cache" but you replied too quickly!
Thank you for your quick support :cyclops:
verynoob said:
Omg I did that before watching your comment and I came here to say " nvm it worked after I did factory reset and wiped cache" but you replied too quickly!
Thank you for your quick support :cyclops:
Click to expand...
Click to collapse
You are welcome!
Viper The Ripper said:
You are welcome!
Click to expand...
Click to collapse
Hi again :laugh: I am facing a problem now with all of these stock firmwares, my original stock firmware had RTL fix , so that the phone can support right-to-left languages, but since SamMobile does not have the rom of my country, what can I do to fix the RTL problem? maybe there is another stock firmware on the SamMobile list that you can see , and might have RTL fix?
Thanks again !
verynoob said:
Hi again :laugh: I am facing a problem now with all of these stock firmwares, my original stock firmware had RTL fix , so that the phone can support right-to-left languages, but since SamMobile does not have the rom of my country, what can I do to fix the RTL problem? maybe there is another stock firmware on the SamMobile list that you can see , and might have RTL fix?
Thanks again !
Click to expand...
Click to collapse
You can try this, it should work in whatever GB rom
You'll need root and CWM to try it, do a backup first (CWM 5.0.2.6 Fixed) in case things get ugly
Turorial by Ahmed hamouda
http://forum.xda-developers.com/showthread.php?t=1970521
Tutorial by s-android
http://forum.xda-developers.com/showthread.php?t=1228753
Hello guys..
i have downloaded a firmware of another country from sammobile because my country is not listed there and when i flashed it with odin, my sim card is not working, its wtf.. can anyone help?? how to choose the right firmware for my samsung galaxy tab 3 ??
Thanks
Viper The Ripper said:
If you use Odin you won't lose your IMEI number but yes you'll change your modem... flashing a full package might change it, but I'm not sure. In full package roms "PHONE" file contains modem's data... I've never tried to flash a rom without this file...or simply changing this file but it could be a posibility :S:S:S
Where are you from? Maybe we could find a flashable CWM modem file
Click to expand...
Click to collapse
zimbabwe
Stock Rom Odin Flashable Firmware
For Galaxy Y S6102 And B5510
What do all the codes mean? Which One Do I Need?
See Here
How To Use Odin
Install samsung usb drivers here
Turn phone off (or pull battery and put back in)
Put your phone into download mode - hold vol down home button then with them held also hold power button
Connect usb cable from phone to pc (use rear usb ports not front ones if you have front usb)
Push vol up to start connection
Open odin 3.07 which you can find by the power of google (other versions may work but thats the one I use)
If odin is connected it will say com then a number is a coloured box under com:id on the left hand side
Only auto reboot and F.reset time shoud be ticked - DO NOT tick anything else!
Put pda in pda
Put modem in phone
Put csc in csc
Start the flashing process
Phone will automatically restart and boot once done
Note if it bootloops just go into recovery and wipe data/reset and restart
If the firmware you want is not listed below try looking on Sammobile
Once you have downloaded the firmware from Sammobile you can use SplitFus2 by Doky in order to split the firmware into pda modem and csc in order to flash via odin - my guide to which can be found Here
Galaxy Y Duos S6102 Firmware
India
S6102_DDMF4_ODDMF4_DDMF4_wipe_by_SplitFUS2
Indonesia, Malaysia, Philippines, Singapore, Vietnam
S6102_DXMD1_OLBMD1_DXMD1_wipe_by_SplitFUS2
Arabic
S6102_JPMA3_OJPMA3_XXMA2_wipe_by_SplitFUS2
European
S6102_XXMC1_XENLC1_XXMA2_wipe_by_SplitFUS2
Click to expand...
Click to collapse
Galaxy Y Pro B5510
Indonesia, Malaysia, Philippines, Singapore, Vietnam
B5510_DXLF1_OLBLF1_DXLE1_wipe_by_SplitFUS2
Arabic
B5510_JPLI1_OJPLF1_XXLH3_wipe_by_SplitFUS2
European
B5510_XXLK3_OXALK3_XXLK1_wipe_by_SplitFUS2
Click to expand...
Click to collapse
Credits
Doky for splitfus2
XDA:DevDB Information
Odin Flashable Stock Rom Firmware For S6102 & B5510, ROM for the Samsung Galaxy Y GT-S5360
Contributors
marcussmith2626
ROM OS Version: 2.3.x Gingerbread
ROM Firmware Required: Stock Gingerbread 2.3.6 Firmware
Based On: Stock Firmware
Version Information
Status: Stable
Created 2014-10-31
Last Updated 2014-10-31
Marcus these firmwares are already splitted right? and dude there is no firmware for Pakistan please update the splitted one
skakazim said:
Marcus these firmwares are already splitted right? and dude there is no firmware for Pakistan please update the splitted one
Click to expand...
Click to collapse
yes they are already split
Pakistan firmware is the Arabic firmware - I have just listed regions not every single country
marcussmith2626 said:
yes they are already split
Pakistan firmware is the Arabic firmware - I have just listed regions not every single country
Click to expand...
Click to collapse
ok thanks
---------- Post added at 12:16 PM ---------- Previous post was at 12:02 PM ----------
marcussmith2626 said:
Stock Rom Odin Flashable Firmware
For Galaxy Y S6102 And B5510
What do all the codes mean? Which One Do I Need?
See Here
How To Use Odin
Install samsung usb drivers here
Turn phone off (or pull battery and put back in)
Put your phone into download mode - hold vol down home button then with them held also hold power button
Connect usb cable from phone to pc (use rear usb ports not front ones if you have front usb)
Push vol up to start connection (if drivers are installed it should say android adb in device manager)
Open odin 3.07 which you can find by the power of google (other versions may work but thats the one I use)
If odin is connected it will say com then a number is a coloured box under com:id on the left hand side
Only auto reboot and F.reset time shoud be ticked - DO NOT tick anything else!
Put pda in pda
Put modem in phone
Put csc in csc
Start the flashing process
Phone will automatically restart and boot once done
If the firmware you want is not listed above try looking on Sammobile
Once you have downloaded the firmware from Sammobile you can use SplitFus2 by Doky in order to split the firmware into pda modem and csc in order to flash via odin - my guide to which can be found Here
Galaxy Y Duos S6102 Firmware
Galaxy Y Pro B5510
Credits
Doky for splitfus2
Click to expand...
Click to collapse
Mod Edit quote hidden
Dude I followed each and every instruction you gave and I guess the flashing was successful but now it is back on the old same boot loop problem.What should I do? Flash again with the same steps?
skakazim said:
ok thanks
---------- Post added at 12:16 PM ---------- Previous post was at 12:02 PM ----------
Dude I followed each and every instruction you gave and I guess the flashing was successful but now it is back on the old same boot loop problem.What should I do? Flash again with the same steps?
Click to expand...
Click to collapse
go into recovery and wipe/data and restart
else use a different firmware
also dont quote the entire first post no need for it and also please only post in one thread - saves me answering in multiple threads
edit - quote of 1st post hidden
Ok sorry
Sent from my GT-S6102 using XDA Free mobile app
Thank You Marcus for the splitted Stock Firmwares for sgyd!
Sent from my GT-S6102 using XDA Free mobile app
XXMA2
HI
by the way ... thank you for this freaking useful thread
i have a lil problem : (old ss from an sd backup)
so i live in morocco but i don't really know what version of XXMA2 was in my phone can u help me
SDR_Muslim_Mo said:
HI
by the way ... thank you for this freaking useful thread
i have a lil problem : (old ss from an sd backup)
so i live in morocco but i don't really know what version of XXMA2 was in my phone can u help me
Click to expand...
Click to collapse
XX firmware is European so flash European firmware
I have flashed European firmware for gt-s6102 and I have bootloop. There has been some note about problem with mounting data.
Any ideas what went wrong ?
jurasjo said:
I have flashed European firmware for gt-s6102 and I have bootloop. There has been some note about problem with mounting data.
Any ideas what went wrong ?
Click to expand...
Click to collapse
have you gone into recovery and wipe data/reset as per instructions on the first post?
if so you will probably need to also include the pit file if you have done wrong flashing in the past for your phone - you can search for the pit file for your phone and include that in the flashing process
Bootloader
no bootloader file required while flashing via odin ?
AsherFreakz said:
no bootloader file required while flashing via odin ?
Click to expand...
Click to collapse
No - I never include it as it's not needed & if you flash the wrong one you would potentially brick your phone & would require a jtag
All you need for general flashing a new stock rom is pda modem & phone & follow my instructions
Thanks
marcussmith2626 said:
Stock Rom Odin Flashable Firmware For Galaxy Y S6102 ........1
Click to expand...
Click to collapse
Thanks a lot to bring my dead phone to alive....:good:
im having "e:cant mount /data" problem....plz help
d33pak_007 said:
im having "e:cant mount /data" problem....plz help
Click to expand...
Click to collapse
You flash this in download mode as per instructions
It will format data so you shouldn't get any errors like that after fishing however you can always manually format data yourself in recovery mode as explained again in the instructions
marcussmith2626 said:
You flash this in download mode as per instructions
It will format data so you shouldn't get any errors like that after fishing however you can always manually format data yourself in recovery mode as explained again in the instructions
Click to expand...
Click to collapse
I know how to get into recovery mode...but download mode..?? can u explain how to get into download mode
d33pak_007 said:
I know how to get into recovery mode...but download mode..?? can u explain how to get into download mode
Click to expand...
Click to collapse
This is the kind of post that really annoys me for 2 reasons
1 - you clearly still haven't read the instructions on the first post as it clearly tells you how to get into download mode and gives step by step instructions on how to do everything
2 - even if by some chance after reading the first post which gives you the answer anyway you could of just typed in Google "How to put galaxy y in download mode"
Sorry to make an example of you but people really do need to follow my instructions and actually read the first post fully!
marcussmith2626 said:
This is the kind of post that really annoys me for 2 reasons
1 - you clearly still haven't read the instructions on the first post as it clearly tells you how to get into download mode and gives step by step instructions on how to do everything
2 - even if by some chance after reading the first post which gives you the answer anyway you could of just typed in Google "How to put galaxy y in download mode"
Sorry to make an example of you but people really do need to follow my instructions and actually read the first post fully!
Click to expand...
Click to collapse
sorry....and i googled it,but needed some experience advice...
d33pak_007 said:
sorry....and i googled it,but needed some experience advice...
Click to expand...
Click to collapse
Successfully unbricked...!!! thanx a lot