So have 2 phones gionee m2 (running on stock rom) and HTC explorer(walkman sense rom).
The problem is that I cannot connect Gionee M2 to pc.I have downloaded all the required drivers from their site and installed on pc.When I connect my phone to pc it shows my phone's sd card only for 5 seconds and then disappears.I thought The problem would be with usb but when i connect my HTC explorer with same usb cable it works perfectly.
So I'm unable to transfer data from my phone to pc.please help
you need to turn on usb connection once you connect m2 to pc. it will prompt you usb connection on / off
Sent from my M2 using XDA Premium 4 mobile app
avigade said:
you need to turn on usb connection once you connect m2 to pc. it will prompt you usb connection on / off
Sent from my M2 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Here's what i do
1) connect gionee m2 to pc
2)It prompts me usb connection in /off.I select on
3)In My Computer I see my sd storage.But it just disappearsafter 2-3 seconds
maheshhraut said:
Here's what i do
1) connect gionee m2 to pc
2)It prompts me usb connection in /off.I select on
3)In My Computer I see my sd storage.But it just disappearsafter 2-3 seconds
Click to expand...
Click to collapse
Try using different connector.
Sent from my A706 using XDA Premium 4 mobile app
Related
before this problem happen, my pc give a notification : usb not recognised. then i tried to fix this problem by removing the usb driver and install it again. after the new driver was installed, my phone cant be detected.when i plugged in the usb to pc, it only charge the phone. the notification of connecting to pc at my galaxy s doesnt show up. ive tried on other pc also. still nothing.
how can i make my galxy s connect back to pc again?
odin did not recognize my phone. when plug to pc, no device connect sound. nothing. the only thing it does is charging my phone.
Connect USB to mainboard usb port .
Install latest Kies .
Reboot phone .
Connect phone with Debugging off .
Connect phone in USB mass storage mode and wait for windows to find drivers and install them .
jje
Hi
I have exactly the same problem. I've tried all the above mentioned suggestions nothing worked for me
Had the same issue, try usb debugging on and then connect to pc or mac
Sent from my GT-I9000 using XDA App
iplaman said:
Had the same issue, try usb debugging on and then connect to pc or mac
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Tried that as well and still not recognized. I'm beginning to this the problem is from the phone itself, cause i've tried it on my PC and Mac and both had the same results (not recognized)
However the phone is working normally, except to this problem
Check for damaged pins in phones micro usb socket.Use fine needle to straight them up.I had the same problem and my phone now is fine.
Sent from my GT-I9000 using XDA Premium App
dubo said:
Check for damaged pins in phones micro usb socket.Use fine needle to straight them up.I had the same problem and my phone now is fine.
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
Thank you so much. That did it for me
You are a genius
Still cant detect. Btw, what lin ur talking bout?
I will bet you.Just look properly in usb micro socket.Took me about 15 minutes to work this out.Czeck if the pins not touching them selfs.
Regards
ADAM
zafrieyl said:
Still cant detect. Btw, what lin ur talking bout?
Click to expand...
Click to collapse
Sent from my GT-I9000 using XDA Premium App
omg! solved. thnks
Hi, to the point, I have problem with USB , if i try connect to PC , it connect but temporaly, then it automatically remount in my phone and disconnect, but some time it connect , but , someone help me please . :crying:
Bad contacts! Use tooth brush to clean it :cyclops:
or buy new original cable~
See this http://forum.xda-developers.com/showthread.php?t=1901505
Sent from my X8 using xda premium
Hello everybody,
-Running Windows 8, (and Windows 7 on other cpu)
-Phone was working fine (on cyanogenmod 4.0.4) and i HAD to play arounf with it.
-Stuck in double boot loop (Original Galaxy S logo followed by Galaxy S Cyanogen logo then a quick flash of cwm loading screen)
-3 button recovery does not work
-Odin/Heimdall do not work
-USB device not detected.
I have a jig, The phone shows download mode....but won't connect to the computers.
I have installe/unistalled kies, installed sdk goole drivers....no success
what to do next
help!
bump.
Your computer does not recognize the phone at all when you connect it via USB???
Does your phone start loading the battery when you connect it to the USB cable?
SeeDoubleYous said:
Your computer does not recognize the phone at all when you connect it via USB???
Does your phone start loading the battery when you connect it to the USB cable?
Click to expand...
Click to collapse
If the phone is powered off and i plug it in it starts directly into a boot loop, and i get 'usb device not recognised'
the only way to shut the phone off is to pull the battery
thanks
Ok when you are in a bootloop, the computer can not recognize the phone. This is only possible in the normal operation mode or on the download mode.
Did you ever try to come into download mode without the USB cable connected?
I mad a jig and can use it to get into download mode, but still get 'usb device notrecognized'
Thanks
Have you tried using another computer or reinstall Windows 7 to your computer when connecting? While Windows 8 should support 95-99% of devices with old derives, the legacy support is never perfect with new OS.
Sent from my GT-I9000 using Tapatalk 2
[I'll give it a try
thanks
fresh install....still didn't work
Also tried Virtual PC fresh install of XP still didn't work
thanks
I think you have to change your USB port. The same thing happened to me computer was not recognizing my phone it was fixed after i sent it for service and changes my usb port which was brooken.
Sent from my GT-I9000 using xda app-developers app
Seems that micro USB isnt working correctly
Sent from my GT-I9000 using xda premium
Hey!
Today I recieved my sgsa and tried to connect it to the computer via usb. I slide the status bar and click USB CONNETCED (MTP Connected) but... nothing happens in my gio the robot (android) appeared and I could connect my phone. I installed kies and downloaded drivers but it doesn't help. Anyone knows the solution? Please, help.
Did you turn on 'USB debugging'
before connecting your phone to PC ??
Vía xÐÆ Øffíçíal™
You can also goto options, network, more options, usb connect to pc, and plug the cable
Sent from my GT-I9070 using xda app-developers app
When I connect my phone to pc. It says
Phone is in usb host mode.
I cannot charge the phone after connecting to pc and pc doesn't show my phone. I've to restart to get charging working again
Im currently on viperone 6.2 I tried changing Rom but that didn't help.
Fastboot works.
Sent from my HTC One using XDA Free mobile app
Pls reply. I'm worried about usb port
Sent from my HTC One using XDA Free mobile app