Hello folks,
I have a One running absolutely stock as of now. Initially it was running on Trickdroid ROM but to make the phone stock and get 4.4.2 OTA, i had flashed the relevant 4.3 RUU and had got the 4.4.2 OTA notification which went through smoothly and it was running on 4.4.2 and 4.19.1540.9 ever since.
Now yesterday, i checked for the Sense 6 update, the phone showed a prompt, downloaded the 670 mb update, tried to install it, got stuck on the red triangle, after 3-4 minutes the phone rebooted and the update failed. Even went into stock recovery, cleared the cache but the update gets stuck on red triangle and phone reboots after that.
Am totally clueless as to what to do now since the phone is stock now, stock recover, locked bootloader and i had even got a 4.2.2 OTA which had successfuly installed, wonder what went wrong this time.
The CID is BS_US001, unlocked 32 GB model from USA and currently using it in India. The usb port has also given away and it never ever connects to a computer (only gets charged with a wall charger) so flashing RUU etc would be impossible i guess.
What should i do now?
Thanks
Did a wipe cache and factory reset from recovery before attempting one more time.
I hit the volume up+power button when the update stopped today and the phone threw a "system/app/plusone.apk" has unexpected contents, installation aborted.
The phone is totally stock, not rooted, bootloader locked, how can it happen? Please help some one. The phone doesn't even get recognised on PC and shows phone is in usb host mode (the usb port is bust), would i be able to get any future OTA update or i should just sell the phone and get something else.
Thanks
coolboy2343 said:
Did a wipe cache and factory reset from recovery before attempting one more time.
I hit the volume up+power button when the update stopped today and the phone threw a "system/app/plusone.apk" has unexpected contents, installation aborted.
The phone is totally stock, not rooted, bootloader locked, how can it happen? Please help some one. The phone doesn't even get recognised on PC and shows phone is in usb host mode (the usb port is bust), would i be able to get any future OTA update or i should just sell the phone and get something else.
Thanks
Click to expand...
Click to collapse
I have this issue also but with settings.apk
coolboy2343 said:
Did a wipe cache and factory reset from recovery before attempting one more time.
I hit the volume up+power button when the update stopped today and the phone threw a "system/app/plusone.apk" has unexpected contents, installation aborted.
The phone is totally stock, not rooted, bootloader locked, how can it happen? Please help some one. The phone doesn't even get recognised on PC and shows phone is in usb host mode (the usb port is bust), would i be able to get any future OTA update or i should just sell the phone and get something else.
Thanks
Click to expand...
Click to collapse
Your options is severely limited with a busted USB port. OTA nandroid backup would not work because your recovery is stock and the backups are custom recoveries; you need the USB port to run a RUU.exe. I can only think of one thing and that is to find an OTA nandroid of your version and pull the "plusone.apk" from it and exchange it for the defective one. But you would need root access to get to the system drive. Sorry not much help!
Thanks for your help majmoz, seems its the end of the road for my m7, time to sell it off and upgrade to something else. There is absolutely no way i can work anything out with a busted usb port. Wonder why this issue cropped up, earlier the 4.4.2 OTA sense 5.5 went through without any trouble , the phone is stock since then but now this update is not being installed.
coolboy2343 said:
Hello folks,
I have a One running absolutely stock as of now. Initially it was running on Trickdroid ROM but to make the phone stock and get 4.4.2 OTA, i had flashed the relevant 4.3 RUU and had got the 4.4.2 OTA notification which went through smoothly and it was running on 4.4.2 and 4.19.1540.9 ever since.
Now yesterday, i checked for the Sense 6 update, the phone showed a prompt, downloaded the 670 mb update, tried to install it, got stuck on the red triangle, after 3-4 minutes the phone rebooted and the update failed. Even went into stock recovery, cleared the cache but the update gets stuck on red triangle and phone reboots after that.
Am totally clueless as to what to do now since the phone is stock now, stock recover, locked bootloader and i had even got a 4.2.2 OTA which had successfuly installed, wonder what went wrong this time.
The CID is BS_US001, unlocked 32 GB model from USA and currently using it in India. The usb port has also given away and it never ever connects to a computer (only gets charged with a wall charger) so flashing RUU etc would be impossible i guess.
What should i do now?
Thanks
Click to expand...
Click to collapse
I talked to HTC support and it seems that they have some problems reported so they put OTA update on hold.
majmoz said:
Your options is severely limited with a busted USB port. OTA nandroid backup would not work because your recovery is stock and the backups are custom recoveries; you need the USB port to run a RUU.exe. I can only think of one thing and that is to find an OTA nandroid of your version and pull the "plusone.apk" from it and exchange it for the defective one. But you would need root access to get to the system drive. Sorry not much help!
Click to expand...
Click to collapse
Well i tried connecting my One to the computer in bootloader mode and it installed the drivers successfully (showed My Htc installed), even the fastboot changed to fastboot usb. Any thing i can do for a workaround?
The moment i switch the phone on and connect to the pc, it says phone is usb host mode but connects absolutely fine in Fastboot mode through bootloader? Should i unlock the bootloader again and flash a custom sense 6 rom or would it be dangerous considering the mobile doesnt connect tp pc if turned on.
coolboy2343 said:
Well i tried connecting my One to the computer in bootloader mode and it installed the drivers successfully (showed My Htc installed), even the fastboot changed to fastboot usb. Any thing i can do for a workaround?
The moment i switch the phone on and connect to the pc, it says phone is usb host mode but connects absolutely fine in Fastboot mode through bootloader? Should i unlock the bootloader again and flash a custom sense 6 rom or would it be dangerous considering the mobile doesnt connect tp pc if turned on.
Click to expand...
Click to collapse
I'm a little confused, if you are getting FASTBOOT USB then the computer is communicating with phone and the phone has to be in a power up state. If you are able to get the phone in that state again, then I would try to run the RUU for your phone's current state (4.19.1540.9). You can get it from @crushalot thread [COLLECTION][GUIDE] HTC M7 RUU, OTA, and Stock Nandroid Downloads. If you go this route, everything on your phone will be erased so you will need to copy the data you want to keep to your computer. After you run the RUU, then try the OTA again.
majmoz said:
I'm a little confused, if you are getting FASTBOOT USB then the computer is communicating with phone and the phone has to be in a power up state. If you are able to get the phone in that state again, then I would try to run the RUU for your phone's current state (4.19.1540.9). You can get it from @crushalot thread [COLLECTION][GUIDE] HTC M7 RUU, OTA, and Stock Nandroid Downloads. If you go this route, everything on your phone will be erased so you will need to copy the data you want to keep to your computer. After you run the RUU, then try the OTA again.
Click to expand...
Click to collapse
None of the 4.x RUU are working. OP, download the OTA file for Dev edition, http://forum.xda-developers.com/showpost.php?p=52702278&postcount=932
And try flashing with stock recovery first, and if it doesn't work then use TWRP.
majmoz said:
I'm a little confused, if you are getting FASTBOOT USB then the computer is communicating with phone and the phone has to be in a power up state. If you are able to get the phone in that state again, then I would try to run the RUU for your phone's current state (4.19.1540.9).
Click to expand...
Click to collapse
Thanks majmoz, even am clueless. The phone is communicating absolutely fine with the computer in fastboot mode which changes to fastboot usb as soon as i connect the cable but if i connect the cable after booting the phone normally (to backup data or do anything), it immediately shows "phone in usb host mode" and windows fails to connect with it.
SaHiLzZ said:
None of the 4.x RUU are working. OP, download the OTA file for Dev edition, http://forum.xda-developers.com/showpost.php?p=52702278&postcount=932
And try flashing with stock recovery first, and if it doesn't work then use TWRP.
Click to expand...
Click to collapse
If i have to flash this OTA, wont it give the same error as am getting when am trying to update it via OTA?
Thanks for the link to the OTA, can i flash OTA from stock recoveries? Would it be advisable to install TWRP, make a nandroid and then try flashing OTA zip. As the phone is not connecting to computer for any data transfer, can i download the OTA file straight from my mobile and then apply it? Read about my issue and it seems that some system file is messed up as its giving "system/app/plusone.apk has expected contents", dont know why but feel RUU would be the last resort, last time also RUU helped as i had tried all other alternatives like flashing stock recoveries etc.
Thanks
coolboy2343 said:
Thanks majmoz, even am clueless. The phone is communicating absolutely fine with the computer in fastboot mode which changes to fastboot usb as soon as i connect the cable but if i connect the cable after booting the phone normally (to backup data or do anything), it immediately shows "phone in usb host mode" and windows fails to connect with it.
Thanks
Click to expand...
Click to collapse
I was wondering is USB Debugging enabled in "Developer Options"? It probably doesn't have any bearing on this situation. I also found this post about Phone in USB Host Mode. If these symptoms are what you are experiencing read through the post and pay particular attention to post #8 by @tobesedated. What is being reported by your PC at the time?
majmoz said:
I was wondering is USB Debugging enabled in "Developer Options"? It probably doesn't have any bearing on this situation. I also found this post about Phone in USB Host Mode. If these symptoms are what you are experiencing read through the post and pay particular attention to post #8 by @tobesedated. What is being reported by your PC at the time?
Click to expand...
Click to collapse
Yes that same option is enabled under developer options, i am having the exact same issues like OP. Once connected to computer, phone wont charge with a wall charger until it reboots.
If the mobile is connected to computer in bootloader mode, windows recognises the device absolutely fine and reflects in device manager "shows android device - my htc", if you boot normally to home screen and connect to computer then it shows on mobile "phone in usb host mode" and device manager shows nothing.
Seems i can just flash firmware or custom ROM's etc but not able to connect to computer to transfer anything to sd card like a user is able to on that thread.
Good news guys, as luck would have it, i read somewhere on xda that to reset the charging mode, switch the phone off, then charge it for 10 mins, hold vol down + up+power button and let it be for 2 mins. I did the same and no more usb host errors, phone is connecting absolutely fine to computer as well as wall charger.
Finding the way out now to update the phone to sense 6.0, saw a 4.19.1540.9 RUU on htc guru but the server is so slow, every time the download breaks at 100-150 mb. Any other workaround?
Thanks
Thanks a ton to @alray, @yatindroid, @SaHiLzZ and @majmoz i finally downloaded the 4.19.1540.9 RUU from Android ruu, connected to windows 7, used the .exe file and it smoothly flashed the stock firmware. After it, updated OTA to sense 6 and this time the update went smoothly and my M7 is now updated to sense 6. It is completely stock now, will easily get OTA updates in future and i wanted to set things right before selling it off so that the future owner does not face issues with the phone, not every one is a member of Xda .
If any one is facing the red triangle issue, download the ruu, flash it to revert to completely stock and then update OTA to glory.
Thanks guys
I have the same problem the red triangle cam when I was trying to update to sense 6 it failed now some of the pre installed apps sent working (music player,message etc.) My phone is completely stock I I don't know how to restore using ruu or anything please help
AahmadB said:
I have the same problem the red triangle cam when I was trying to update to sense 6 it failed now some of the pre installed apps sent working (music player,message etc.) My phone is completely stock I I don't know how to restore using ruu or anything please help
Click to expand...
Click to collapse
post the output of fastboot getvar all excluding imei and serialno.
are you sure your phone is 100% stock?
can the phone boot in the OS?
alray said:
post the output of fastboot getvar all excluding imei and serialno.
are you sure your phone is 100% stock?
can the phone boot in the OS?
Click to expand...
Click to collapse
INFOversion: 0.5
INFOversion-bootloader: 1.56.0000
INFOversion-baseband: 4A.25.3263.21
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 4.19.401.11
INFOversion-misc: PVT SHIP S-ON
INFOmeid: 00000000000000
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOcidnum: HTC__J15
INFObattery-status: good
INFObattery-voltage: 3821mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-4dab9d12
INFOhbootpreupdate: 11
INFOgencheckpt: 0
yes it is completely stock no modification no custom rom i dont even know how to flash or anything yes it boots up normally most of the things are working except bluetooth music player mesaages app
Related
So I was really dumb and tried to factory reset my phone while I was on a custom rom and now am stuck in a boot loop. I have been googling around to try and figure out what to do but nothing seems to work. When I try and Hboot an RUU stock file it gets stuck at UserData. I also cannot get into recovery only Hboot.
I am relocked and S-On. Don't know what else to do. Is it beyond repair?
Ok when you run the ruu are you selecting fastboot in the hboot screen ? Does it say USB after fastboot when connected ?
Bigtjmc said:
Ok when you run the ruu are you selecting fastboot in the hboot screen ? Does it say USB after fastboot when connected ?
Click to expand...
Click to collapse
When i hold down power and volume down it goes to the Hboot screen and it automatically looks for the PH39IMG.zip file so no I am not running fastboot but when I do select fastboot it only says fastboot no USB (i do not have it plugged into PC btw).
When you select fastboot , then plug it in the pc and it should go USB , if not you need to install the drivers
If you need the drivers you dl htc sync manager , or dl the toolkit in the dev forum and install them that way .
Fastboot USB is showing up but HTC Sync is saying there are no devices connected, not sure if thats a problem.
Ok did you do this when you ran the ruu ?
brandork said:
Fastboot USB is showing up but HTC Sync is saying there are no devices connected, not sure if thats a problem.
Click to expand...
Click to collapse
HTC sync looks for devices that are powered on...just try and run the ruu..listen to bigtjmc
AND DON'T UNPLUG ONCE IT'S GOING, THE PROCESS TAKES A WHILE...
Sent from my HTC PH39100 using Tapatalk 2
Well I was actually extracting the RUU image from my PC's temp folder then placing it on my phone to allow Hboot to find it. I am now running the actual RUU software on my PC and it seems to be working. I will update when its finished. Thanks so much for your help.
Right on ,
Let us know what happens .
The ruu is stuck at 34%...I have it plugged in still not sure what to do from here
How long has it been stuck?
Don't unplug it...just let it sit...
Sent from my HTC PH39100 using Tapatalk 2
sorry guys I was in class and couldnt respond. so right now i went through the RUU recovery steps and it allowed me to re-do the RUU setup. I just redid it thinking my PC may have messed up but I am stuck at 34% again. Any suggestions for what I should do after I recover it again?
edit: forgot to mention that I left it for a few hours while in class and it took me to the recovery setup
Can you get into recovery when it sends you there ?
no I cannot get into recovery. All i can do is get into fastboot.
Right but what recovery setup you mentioned earlier ? Maybe you got a bad ruu download try and re dl it or try a different version.
Sorry the recovery I mentioned was a recovery process the RUU takes you through when an update fails. I also have tried about 4 different downloads to no avail. I have been using this file here
Ok , what Rom did you have on the phone ?
I couldnt tell you for sure I installed it pretty quickly after the ICS update was available. I want to say I installed one of the HTC Holiday or Raider ICS roms because that was available before the Vivid one. Once that was installed I rooted.
Ok one last thing and I will see what I can come up with , the ruu screen when it stopped at 34% what was it trying or waiting on ?
Hi i will put everything out so it can be answered without going back and forth : I was installing Trickdroid 10.3 and was about 95% done then it crashed I erased the wrong thing and now am stuck on hboot/fastboot screen everything I seleect either shuts down phone and restarts it back in same place or does nothing helpful. Usb can't be seen and recovery will do same flash off the right back to same screen s-on was s-off but is now back to on hboot is 1.44 radio 4a 14.3250.13 phone was rooted and bootloader was unlocked my device is TAMPERD and says UNLOCKED HAHAHA had to say T&U was funny when i got it saying it still is, but says ss-on... I have been looking and readin for a week and now it came down to taken suggestistions and hopefully we can get it fixed cause i dont want to end up with an electric bath toy for the babys!!!:crying:
DrzNikki said:
Hi i will put everything out so it can be answered without going back and forth : I was installing Trickdroid 10.3 and was about 95% done then it crashed I erased the wrong thing and now am stuck on hboot/fastboot screen everything I seleect either shuts down phone and restarts it back in same place or does nothing helpful. Usb can't be seen and recovery will do same flash off the right back to same screen s-on was s-off but is now back to on hboot is 1.44 radio 4a 14.3250.13 phone was rooted and bootloader was unlocked my device is TAMPERD and says UNLOCKED HAHAHA had to say T&U was funny when i got it saying it still is, but says ss-on... I have been looking and readin for a week and now it came down to taken suggestistions and hopefully we can get it fixed cause i dont want to end up with an electric bath toy for the babys!!!:crying:
Click to expand...
Click to collapse
Can you see the device in ADB mode?
dgtiii said:
Can you see the device in ADB mode?
Click to expand...
Click to collapse
No I can't......I also forgot I am running windows 8, when I use the adb device nothing, any adb codes, or serial numbers don't show up. No matter what is done recovery is not working. I have an s4, it too was in the same state, I was able to download ROM to external SD card, rebooted into recovery mode, and re-flash ROM. That is almost fixed...
If I get a female to female USB and mount the USB somehow will it give it the same effect? If so any suggestions? Or any other suggestions to help me get through this?
DrzNikki said:
No I can't......I also forgot I am running windows 8, when I use the adb device nothing, any adb codes, or serial numbers don't show up. No matter what is done recovery is not working. I have an s4, it too was in the same state, I was able to download ROM to external SD card, rebooted into recovery mode, and re-flash ROM. That is almost fixed...
If I get a female to female USB and mount the USB somehow will it give it the same effect? If so any suggestions? Or any other suggestions to help me get through this?
Click to expand...
Click to collapse
Yes, that would be my advice. Go to a site like Amazon, and search for a "micro USB OTG cable". They are inexpensive, and will allow you to use a flash drive with the phone in recovery. Then download a rom onto a flash drive, and install from there.
dgtiii said:
Yes, that would be my advice. Go to a site like Amazon, and search for a "micro USB OTG cable". They are inexpensive, and will allow you to use a flash drive with the phone in recovery. Then download a rom onto a flash drive, and install from there.
Click to expand...
Click to collapse
Thank you for replying!!! How would I get into recovery with no access to the phone? Is there a manual script to get into it? Also I can upload a picture of the only part of the phone I can see if that would help?
DrzNikki said:
Thank you for replying!!! How would I get into recovery with no access to the phone? Is there a manual script to get into it? Also I can upload a picture of the only part of the phone I can see if that would help?
Click to expand...
Click to collapse
Hold down the power button while holding down the volume down button at the same time until the phone reboots. If it does not, use the same procedure while holding the proximity sensor under a bright light (sounds weird but it works!). Phone will boot into bootloader mode, select recovery, and you will be good to go. I'll take a look if you upload a pic, sure
I had something similar, but managed to get in through ABD (windows 7), but also remembering that I was stuck in a boot loop, i wiped cache , re tried and rom loaded and booted. Have a read up on ABD in windows 8, see if there's anthing your missing or specific modded files needed for windows 8 and ADB running, just my opinion
I browsed a few other threads, and tried to update the recovery with the latest version per the advice of a member, and prior to this, it was just stuck at the green HTC screen with the red disclaimer under it. And after flashing the newest recovery TWRP it has begun to loop.
I also cannot boot into recovery now. Only fastboot is working,.
Phone info is:
***UNLOCKED****
VLE PVT SHIP S-OFF RL
CID - 11111111
HBOOT- 1.14.0005
RADIO - 1.13.50.05.25
OPENDSP-V29.1.0.45.0622
EMMC-BOOT
NOV 21, 2012, 12:17:41
I believe everything is set for the Maximus ROM to work, but if I am missing something I would appreciate the feedback and help.
Thanks
Tancred
Tancred213 said:
I browsed a few other threads, and tried to update the recovery with the latest version per the advice of a member, and prior to this, it was just stuck at the green HTC screen with the red disclaimer under it. And after flashing the newest recovery TWRP it has begun to loop.
I also cannot boot into recovery now. Only fastboot is working,.
Phone info is:
***UNLOCKED****
VLE PVT SHIP S-OFF RL
CID - 11111111
HBOOT- 1.14.0005
RADIO - 1.13.50.05.25
OPENDSP-V29.1.0.45.0622
EMMC-BOOT
NOV 21, 2012, 12:17:41
I believe everything is set for the Maximus ROM to work, but if I am missing something I would appreciate the feedback and help.
Thanks
Tancred
Click to expand...
Click to collapse
This is HTC ONE forum not ONE S , you can try with RUU.exe while you're in bootloader or " fastboot oem rebootRUU "
Vixa said:
This is HTC ONE forum not ONE S , you can try with RUU.exe while you're in bootloader or " fastboot oem rebootRUU "
Click to expand...
Click to collapse
My bad, I was following posts about this ROM and assumed they were discussing the same phone. But it appears that there isn't a S thread, only an X for this model..
This takes me to a silver HTC logo and hangs there... I have fastboot access, but i cant get ADB to talk to the phone. But with fastboot I can push a new recovery img but still not allowing me into any recovery.
If you cant get into recovery donwload a RUU and get your phone flashed with it from FASTBOOT.
Vixa said:
If you cant get into recovery donwload a RUU and get your phone flashed with it from FASTBOOT.
Click to expand...
Click to collapse
Able to get into Philz recovery and adb sideload zips, but it cant find my sdcard...what a headache this is turning into, and no closer to knowing what the problem was / is.
Tell me can you mount system or get in twrp or something to hold on?
Sent from my HTC One using Tapatalk
Vixa said:
Tell me can you mount system or get in twrp or something to hold on?
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
Changed TWRP to CWM which is at least allowing me into recovery mode.
Thinking I will have to transfer the files with another android phone onto the memory and try to install the rom again?
Mounting USB fails, it just makes a sound like I have added a drive to my PC non stop every few seconds, and I cant mount anything. formatted it and it seems to have settled it a bit. But I cant do anything with the storage via USB in Windows. Just updated to the latest clockwork for my model and still no success...
With latest version I cant even sideload at the moment.
Tancred213 said:
Changed TWRP to CWM which is at least allowing me into recovery mode.
Thinking I will have to transfer the files with another android phone onto the memory and try to install the rom again?
Mounting USB fails, it just makes a sound like I have added a drive to my PC non stop every few seconds, and I cant mount anything. formatted it and it seems to have settled it a bit. But I cant do anything with the storage via USB in Windows. Just updated to the latest clockwork for my model and still no success...
With latest version I cant even sideload at the moment.
Click to expand...
Click to collapse
Ok, sorted that out, apparently the drivers were having issues, and when I manually picked them I became able to communicate with the phone again like normal. This is like hour 8 of the upgrade so far...
Assuming my firmware is also outdated, and from my searching I havent found an easy way to update my hboot and others without flashing a RUU Rom from T-Mobile, any alternatives to doing that?
Pretty sure I killed it. Downloaded the latest RUU from T-Mobile, after relocking the bootloader and turning S-on, it ran fine, completed, rebooted the phone and now its totally dead. No charge light, doesnt turn on at all. And I was just thinking to myself how hard it is to brick a phone since I have yet to kill one with all of my misadventures....oops. We'll see what happens..
Had you read the HTC One S forum, you would have found out that this particular phone can get hard bricked up S-OFF with SuperCID and then a RUU update is ran.
Lately my phone has been rebooting itself quite a bit. It seems to be getting progressively worse to the point where if I open any app for more than a minute or two then my phone will reboot. I've tried uninstalling quite a few third party apps but that didn't do the trick. Whenever I try to do a hard reset (whether it's through settings or the HBOOT menu) the phone will shut down and then instead of getting the picture of a phone with the green thing in the middle and a status bar below that indicating the phone is resetting, I get a picture of a phone with a red symbol similar to a hazard sign that will last for about 30 seconds then the phone just boots back up to my home screen. I had put an incorrect custom ROM on this phone about 5-6 months ago but I was able to get the stock Sprint ROM back on the phone and relock the boot loader and the phone functioned fine ever since up until about a week ago when it started rebooting randomly. I have a feeling this may be part of the reason why the factory reset is not working. Does anyone have any ideas on how to proceed? Can I do a factory reset by pushing a ROM to the phone through my computer?
If u are s-off then I suggest u download the ruu and run it. If s-off all u have to do is go to hboot and select fast boot and run the program it will reset the phone back to whatever software version it is for the ruu. If your not s-off you will need to get the ruu that matches your firmware. That should fix your troubles if not then you have something faulty with the hardware itself
Sent from my iPad using Tapatalk
Ok I am S-ON and here is what I am trying to do. I downloaded the RUU that matches my phone current software from the link below and placed the file in the platform-tools folder after renaming it. When I run the fastboot oem rebootRUU command in the cmd prompt, my phone just reboots rather than booting to the black screen with the silver HTC logo. Any suggestions on how to proceed?
http://forum.xda-developers.com/showthread.php?t=2687690
Also, my bootloader shows that it is relocked
coppertop4646 said:
Ok I am S-ON and here is what I am trying to do. I downloaded the RUU that matches my phone current software from the link below and placed the file in the platform-tools folder after renaming it. When I run the fastboot oem rebootRUU command in the cmd prompt, my phone just reboots rather than booting to the black screen with the silver HTC logo. Any suggestions on how to proceed?
http://forum.xda-developers.com/showthread.php?t=2687690
Also, my bootloader shows that it is relocked
Click to expand...
Click to collapse
That is a firmware flashing that will do nothing for u. Here is a link to the newest RUU I can find http://forum.xda-developers.com/showthread.php?t=2658910
Sent from my One using Tapatalk
luigi311 said:
That is a firmware flashing that will do nothing for u. Here is a link to the newest RUU I can find http://forum.xda-developers.com/showthread.php?t=2658910
Sent from my One using Tapatalk
Click to expand...
Click to collapse
Ok I tried that RUU yesterday and couldn't seem to get anywhere because I kept getting error 170 (tried updating drivers, installing HTC sync, etc). Tried again today and got error 170 again, so then I went in my bootloader, then fastboot, connected USB cable, fastboot usb. I then ran the RUU and it said it was going to update my phone. The status bar then said "Waiting for bootloader" and my phone just rebooted itself to the home screen and then I got like error 171 or something (another USB error). I'm kind of running out of ideas at this point. I believe something is wrong with my recovery or I have some sort of bug because I attempted to flash a custom recovery today (TWRP) but when I unlocked my bootloader, I restarted the phone and entered my bootloader again but it still said relocked (even though the prompt on my phone came up giving me the warnings asking if I was sure I wanted to unlock the bootloader) so when I run the command fastboot flash recovery twrp.img I get something along the lines of can't read twrp.img or can't open twrp.img (yes I made sure the file is in the same folder that I am running the adb out of). Willing to try any recommendations at this point because my phone is pretty useless as of right now because it restarts every couple minutes. HTC wants $150 to fix it which I told them I'm not willing to pay, rather buy a new phone.
I had rooted my HTC One M7-Sprint a few months ago and installed CyanogenMod 11. Worked great. Now I'm trying to get it back to stock to sell it back cause I have a new phone.
I ran HTC One Gurus Rom "Guru Reset M7 Sprint 1.31.651.2" to return to stock with stock recovery. It did appear to work.
I have bootloader unlocked, and am S-ON.
One of the issues is that the Rom won't match the Firmware since all i could flash was the Rom being S-Off. The idea is that once I do an OTA it will update the Rom and the Firmware and I'll match.
But right now that mismatch between ROM and Firmware has my phone working, boots up into stock Android, but with a non-working screen. I'm told when we OTA it will be working again. the rom was 1.31, and from what I see in running Fastboot Getvar All the Firmware (I think that's version-main?) is 5.05.651.2. So I guess it's Cyanogenmod Firmware? Anyway, no match to the ROM version.
How do I get to the OTA without a working screen? I really don't want to buy any sort of hardware and spend a lot of $$, since I'm only going to get about $35 for the phone when I trade it in! I do have USB Debugging on and ADB working. Is there a way to start an OTA from ADB?
Have you tried just flashing the latest RUU? You may have to flash the full firmware first. That would get the phone up and running with the latest release.
http://forum.xda-developers.com/showthread.php?t=2795856
Hung applying OTA HTC One M7 Sprint
What I read from HTCOne Guru said (which is where I got the file I flashed) said you can't flash RUU if you're S-ON.
I found a cheap on the go cable, connected my mouse, and got the OTA downloaded. Then I said yes, install it. It restarted twice, then....nothing. Frozen. White HTC screen, nothing.
So I powered off, powered on, it starts loading, I hear about 3 notes of the HTC music as it's restarting, and ....nothing. Still stuck.
I can boot into Fastboot, but not ADB it seems (I can't get ADB Devices to return the device ID but I can get Fastboot Devices to return the ID.)
I've powered down and restarted, and I've tried to get into recovery (shuts down the phone). I've rebooted from Fastboot screen. Nothing works.
Steve Thomas said:
What I read from HTCOne Guru said (which is where I got the file I flashed) said you can't flash RUU if you're S-ON.
I found a cheap on the go cable, connected my mouse, and got the OTA downloaded. Then I said yes, install it. It restarted twice, then....nothing. Frozen. White HTC screen, nothing.
So I powered off, powered on, it starts loading, I hear about 3 notes of the HTC music as it's restarting, and ....nothing. Still stuck.
I can boot into Fastboot, but not ADB it seems (I can't get ADB Devices to return the device ID but I can get Fastboot Devices to return the ID.)
I've powered down and restarted, and I've tried to get into recovery (shuts down the phone). I've rebooted from Fastboot screen. Nothing works.
Click to expand...
Click to collapse
All HTC phones come s-on...I don't know where people are getting the info saying you cannot RUU if you are s-on. **Sidenote** You cannot RUU backwards if you are s-on.
The RUU is your best bet to get your device working again.
Remember you need to re-lock your bootloader before running the RUU