[Q] Boot loop since failed update - Nook HD, HD+ Q&A, Help & Troubleshooting

Hi, I'm hoping someone can provide some assistance.
Since my daughters Nook failed during an update, all it does it loop during boot (Nook logo, then Cyanogen bootloader image, and round it goes).
I downloaded the latest Cyanogen Hummingbird version, and tried to install off the external SD, it fails Installing Update, along the lines of some changes failed Status 7, aborted. Then I read I might need to update the CWM recovery (currently on versoin 6.0.3.6)
Can someone advise what I should be trying here? Thanks for the pointers in advance.
mdemetri2

mdemetri2 said:
Hi, I'm hoping someone can provide some assistance.
Since my daughters Nook failed during an update, all it does it loop during boot (Nook logo, then Cyanogen bootloader image, and round it goes).
I downloaded the latest Cyanogen Hummingbird version, and tried to install off the external SD, it fails Installing Update, along the lines of some changes failed Status 7, aborted. Then I read I might need to update the CWM recovery (currently on versoin 6.0.3.6)
Can someone advise what I should be trying here? Thanks for the pointers in advance.
mdemetri2
Click to expand...
Click to collapse
If you are trying to install CM11, i'm pretty sure you need to update your CWM. I think version 6.0.4.5 to be exact.
Sent from my SPH-L710 using Tapatalk

TrNz4mD116 said:
If you are trying to install CM11, i'm pretty sure you need to update your CWM. I think version 6.0.4.5 to be exact.
Sent from my SPH-L710 using Tapatalk
Click to expand...
Click to collapse
Thanks for the reply.....I will take a look at how to update CWM

I have the same issue. I tried updating to cm-11-20140505-Shapshot-M6 and it just keeps trying to boot then going back to Recovery. Looks like my Recovery is 6.0.3.2
How do I update Recovery from within Recovery?

darien87 said:
I have the same issue. I tried updating to cm-11-20140505-Shapshot-M6 and it just keeps trying to boot then going back to Recovery. Looks like my Recovery is 6.0.3.2
How do I update Recovery from within Recovery?
Click to expand...
Click to collapse
Download the new recovery zip on the Nook and flash it. Then, reboot and your recovery should be updated.
Sent from my SPH-L710 using Tapatalk

Related

[GUIDE] Manually update your Nexus S to GRH78

http://android.clients.google.com/p...553.signed-soju-GRH78-from-GRH55.a71a2082.zip
Download the OTA package here
Rename it to update.zip, and place it on the root of your internal storage
Shut down your phone, and reboot into the bootloader by holding volume up and powering back on
Choose "recovery" from the list, and select it with the power button
When you see the red triangle press volume up and choose to update
Credit Gbhil for the file
IF YOU ARE ON CWM:
Just got an Android 2.3.1 update for Nexus S. It's on ROM manager if you want it. Make sure you flash recovery 3.0.
Also, for this to work you must be on Stock Recovery. This will not flash properly if you are using clockwork recovery
momohammed20 said:
Also, for this to work you must be on Stock Recovery. This will not flash properly if you are using clockwork recovery
Click to expand...
Click to collapse
Correct. Koush is currently looking at fixing this for CWM.
Can we try to update and flash the zip using adb?
This was just tweeted:
Just got an Android 2.3.1 update for Nexus S. It's on ROM manager if you want it. Make sure you flash recovery 3.0.
edit nevermind got update
I just got prompted OTA for this update. Anyone know it I was to accept it, would I have any problems since I changed my recovery to ClockWork recovery?
I know it's been said it's on rom manager now, I am just curious if there would be any potential problems of accepting OTA updates with the stock recovery gone.
I have cwm recovery flashed and looked in Rom manager but is getting that "the rom you are using does not support ota updates etc" How did you manage to get Rom manager to update it to GRH78??
ive tried every way listed on xda but still get a "error 7" when trying to flash the update. i am using stock rom with clockwork 3.0. anyone having the same issue or any way to fix it?
usb disabled?
Got the message from Google to update. So I let it do its thing, said unable to update zip and now seems my usb connection is broken. Any help will be greatly appreciated. I'm on NS despite my sig Also on CWR 3.0 unlocked
are we supposed to be able to install this 2.3.1 update that we download from rom manager?
nsavani said:
ive tried every way listed on xda but still get a "error 7" when trying to flash the update. i am using stock rom with clockwork 3.0. anyone having the same issue or any way to fix it?
Click to expand...
Click to collapse
Koush is gonna repackage it later tonight for those with error 7
demo23019 said:
are we supposed to be able to install this 2.3.1 update that we download from rom manager?
Click to expand...
Click to collapse
How did you get it to download? I hope Koush gets CWM to play nice with the updates.
yungfresh said:
How did you get it to download? I hope Koush gets CWM to play nice with the updates.
Click to expand...
Click to collapse
Well there is very little info in OP
and could be worded little better to avoid confusion
You have to put on Wifi and go to download ROM for some reason if you on on mobile network it wont show the update in rom manager
Dont bother it wont. From what i gathered we have to wait for modified version
Download the zip, choose to open with rom manager and it will flash fine with cw recovery 3.0.0.
Sent from my Nexus S using XDA App
dirk1978 said:
Download the zip, choose to open with rom manager and it will flash fine with cw recovery 3.0.0.
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
not for me
demo23019 said:
Well there is very little info in OP
and could be worded little better to avoid confusion
You have to put on Wifi and go to download ROM for some reason if you on on mobile network it wont show the update in rom manager
Dont bother it wont. From what i gathered we have to wait for modified version
Click to expand...
Click to collapse
Got great news! I got it to work! All I did was put the .zip file on the root of my sd and used Rom manager to "download rom" chose the .zip file and voila!! It installed everything fine. I am officially on GRH78. Hope that helps people out!
is this with the paid version or non-paid?
the CWM update will work of you have not used Koush's rooboot.img and are running a the rooted boot.img.
He said he will release a version later tonight that should work with rootbootimg installed as well.
glad im on stock recovery + root.

Bricked?

I tried to flash MIUI from TWRP recovery and it reboots right back to recovery. I used cwm from the sdcard, flashed there and when I take it out it reboots back to TWRP. I tried to flash other roms but they all failed both ways. Help? Please?
Sent from my DROID2
odj1041 said:
I tried to flash MIUI from TWRP recovery and it reboots right back to recovery. I used cwm from the sdcard, flashed there and when I take it out it reboots back to TWRP. I tried to flash other roms but they all failed both ways. Help? Please?
Sent from my DROID2
Click to expand...
Click to collapse
You may be in a recovery bootloop. Look at my tips thread linked in my signature to see what that is and some possible ways to get out of it.
leapinlar said:
You may be in a recovery bootloop. Look at my tips thread linked in my signature to see what that is and some possible ways to get out of it.
Click to expand...
Click to collapse
Worked perfectly after I used your CWM 5.5.0.4. Thank you so much. I and I bet a whole bunch of other Nook Color users that had issues with it, appreciate your help.

Cyanogenmod 10.1 on HD

Hello Friends!! im recently bought an Atrix HD and I bought it because i like the model and i saw that is compatible with CM, i was reading about flashing this cell, i unlocked the bootloader and also root the cellphone with the tutorials of this page, but when i tried to install CM from sd something happens and the installation its aborted, i dont know if i have to install also a custom recovery, i download this one http://forum.xda-developers.com/showthread.php?t=2298489 its that a custom recovery? the file that im trying to flash is downloaded from the official page of CM its a RC firmware. im running actually android 4.1 the original of AT&T. hope some one can help me.
Use this for recovery. http://forum.xda-developers.com/showthread.php?t=2421418
Fastboot flash on the computer, then download the latest nighty from get.cm I think. What error? Status code? Those would be nice to help you out more
Sent from my MB886 using xda app-developers app
Don Mike said:
Hello Friends!! im recently bought an Atrix HD and I bought it because i like the model and i saw that is compatible with CM, i was reading about flashing this cell, i unlocked the bootloader and also root the cellphone with the tutorials of this page, but when i tried to install CM from sd something happens and the installation its aborted, i dont know if i have to install also a custom recovery, i download this one http://forum.xda-developers.com/showthread.php?t=2298489 its that a custom recovery? the file that im trying to flash is downloaded from the official page of CM its a RC firmware. im running actually android 4.1 the original of AT&T. hope some one can help me.
Click to expand...
Click to collapse
Maybe what happened to you is that you had flashed a custom recovery, but then in the next reboot the stock recovery was automatically re-flashed.
Try to install custom recovery by Terminal Emulator, then reboot to recovery right after you flashed using command code. I believe you can search for this inside our Atrix HD forum sector.
If you can boot to CWM recovery, there will be a CWM icon instead of an Android bot with its belly opened as in Stock recovery.
Good luck.
Done
Ok thanks too much!! just need instal the Recovery, after that the installation of CM run and installation finished as normal!! there is a new version of CM 10.1 stable, it was what I flash it!!
Don Mike said:
Ok thanks too much!! just need instal the Recovery, after that the installation of CM run and installation finished as normal!! there is a new version of CM 10.1 stable, it was what I flash it!!
Click to expand...
Click to collapse
please show me clearly about what you did, files you used. I have a problem that cyanogen logo turn around and around and i can't use my phone
thanks
finally i solved problems by myself

[q] cannot install cm 11!! :(

Hi guys I downloaded CM 11 from cyanogenmod.org for the Atrix HD and when I try to download it I get the error ''Status 7'' with CWM Recovery. Have you guys been able to install it with the file from the web site?? Please help :crying:
Are you running the latest recovery?
Phil recovery iss more up to date then the cwm itself
audit13 said:
Are you running the latest recovery?
Click to expand...
Click to collapse
Yes I am running cwm recovery 6.04.4e
SVLAN said:
Phil recovery iss more up to date then the cwm itself
Click to expand...
Click to collapse
How do I replace CWM recovery for Phil recovery?? Any guide??
Download and flash in recovery
Sent from my MB886 using XDA Premium 4 mobile app
Not sure if this will help: http://forum.xda-developers.com/showthread.php?t=2302599
penser
audit13 said:
Not sure if this will help: http://forum.xda-developers.com/showthread.php?t=2302599
Click to expand...
Click to collapse
Like I mention in every one of these threads, Status 7 is, at least 99% of the time, a bad download. Redownload and verify the MD5 checksum.
The MD5 for the official nightly is "513639551c586888db38bc9b17c7dab2". Use this program to verify the MD5 checksum.
helldogg75 said:
Download and flash in recovery
Sent from my MB886 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thank you. I just flashed that recovery and it worked.
I'm having the same problem with every single 4.4 and 4.4.x rom. I've tried removing the lines of code method already, running 6.0.2.8 cwm
ph3dia said:
I'm having the same problem with every single 4.4 and 4.4.x rom. I've tried removing the lines of code method already, running 6.0.2.8 cwm
Click to expand...
Click to collapse
4.4 needs the latest CWM to install. Try using Philz Touch Recovery or install the latest img from the Clockwork website.
I don't know if any of you guys solved your issues but you need to download cm11 onto external SD card then download philz touch version of cwm also on ESD card. Flash philz touch in your already existing cwm whatever version that may be. I forgot if it will boot back into recovery automatically but get back into recovery. If you are soft bricked get back in recovery by holding the power and vol up button I think and just flash rom as normal wipe data/cache/dalvik etc. That's how fixed my status 7 and flashed OSE 4.4.2 and loving it. Hope I helped.
Black_halo said:
I don't know if any of you guys solved your issues but you need to download cm11 onto external SD card then download philz touch version of cwm also on ESD card. Flash philz touch in your already existing cwm whatever version that may be. I forgot if it will boot back into recovery automatically but get back into recovery. If you are soft bricked get back in recovery by holding the power and vol up button I think and just flash rom as normal wipe data/cache/dalvik etc. That's how fixed my status 7 and flashed OSE 4.4.2 and loving it. Hope I helped.
Click to expand...
Click to collapse
So I was able to update my recovery but now every single rom that I try to flash ends up stuck at the motorola logo. I don't know what to do. I can still get into recovery but no rom works.
ph3dia said:
So I was able to update my recovery but now every single rom that I try to flash ends up stuck at the motorola logo. I don't know what to do. I can still get into recovery but no rom works.
Click to expand...
Click to collapse
Moto logo? Are you trying to go back to stock?
Black_halo said:
Moto logo? Are you trying to go back to stock?
Click to expand...
Click to collapse
Nah, it's the dual core technology right before the animation for the startup. I posted a thread about the problem.
ph3dia said:
I'm having the same problem with every single 4.4 and 4.4.x rom. I've tried removing the lines of code method already, running 6.0.2.8 cwm
Click to expand...
Click to collapse
Try flashing Phil's Recovery, it should be version 6.0.4.5. Once I flashed Phil's I have not had a failed flash of any 4.4 Rom.
Here is the link in case you need it.
http://forum.xda-developers.com/showthread.php?t=2552622
PeteSeiler2010 said:
Try flashing Phil's Recovery, it should be version 6.0.4.5. Once I flashed Phil's I have not had a failed flash of any 4.4 Rom.
Here is the link in case you need it.
http://forum.xda-developers.com/showthread.php?t=2552622
Click to expand...
Click to collapse
That's what I've been running
ph3dia said:
That's what I've been running
Click to expand...
Click to collapse
Maybe try going back to stock and starting over. Whenever I have strange problems like this and everything checks out, I revert to stock and start over.
PeteSeiler2010 said:
Maybe try going back to stock and starting over. Whenever I have strange problems like this and everything checks out, I revert to stock and start over.
Click to expand...
Click to collapse
That was the first thing I tried, I just get a black screen once the phone tries to boot up.
ph3dia said:
That was the first thing I tried, I just get a black screen once the phone tries to boot up.
Click to expand...
Click to collapse
Did you use fastboot commands or the RUU?
Sent from my Atrix HD using XDA Premium 4 mobile app

I've lost access to recovery (TWRP)

I recently tried to update recovery via "TWRP Recovery" app from the Play Store. I now know that this was not the correct way to do this as the KK & LP bootloaders have to have recovery "bumped." As of right now, I get an error whenever I try to boot into recovery. Phone works just as it did before but I would like to know how I could get my recovery back. Any ideas or help is greatly appreciated. - Thanks!
Currently running BlissPop v3.9 w/ stock kernel.
djtimes3 said:
I recently tried to update recovery via "TWRP Recovery" app from the Play Store. I now know that this was not the correct way to do this as the KK & LP bootloaders have to have recovery "bumped." As of right now, I get an error whenever I try to boot into recovery. Phone works just as it did before but I would like to know how I could get my recovery back. Any ideas or help is greatly appreciated. - Thanks!
Currently running BlissPop v3.9 w/ stock kernel.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2584938
gbeardmore said:
http://forum.xda-developers.com/showthread.php?t=2584938
Click to expand...
Click to collapse
I am still not able to get to my recovery after trying this method. I am getting a "Secure Booting Error." Should I delete the recovery that I already have on the SD Card and try to flash again?

Categories

Resources