Related
Hi!
Just wondering what would happen if I accidentely flashed a kernel as, for example a csc or modem.
Would I still be able to get into download mode?
Ty!
Difusal said:
Hi!
Just wondering what would happen if I accidentely flashed a kernel as, for example a csc or modem.
Would I still be able to get into download mode?
Ty!
Click to expand...
Click to collapse
It will brick your phone.. When ever i flash
I make Nandroid Backup..
Check I can get into BOTH recovery & download mode using ONLY 3 button combination..
Then I will go ahead and flash..!!
Depending your phone will get boot loops, stay stuck in download mode or computer & exclamation mark logo..
DON'T EXPERIMENT LIKE YOU HAVE STATED ABOVE
I did it already lol nothing happened cause i used the .512 pit file...
That file arranges everything to flash the fone itself correctly
Sent from my GT-I9000 using XDA Premium App
flash kernel. confused:
Can you guys help me..
I want to change my current kernel to a new one..!!
I'm on darkcore kernel (yes im on darkyrom), now how do I change kernel..??
Do i just flash kernel file using odin on top..?? (i don't need to delete/wipe old kernel)..
And what about factory reset & wipe cache..??
Yes im a new starters.. I keep thinking you must factory reset /wipe every time you flash something new.. :
very very good question about flashing the wrong file at the wrong place, so, did anyone tried it out? need more feedbacks
Rash said:
Can you guys help me..
I want to change my current kernel to a new one..!!
I'm on darkcore kernel (yes im on darkyrom), now how do I change kernel..??
Do i just flash kernel file using odin on top..?? (i don't need to delete/wipe old kernel)..
And what about factory reset & wipe cache..??
Yes im a new starters.. I keep thinking you must factory reset /wipe every time you flash something new.. :
Click to expand...
Click to collapse
welcome,
to flash a kernel, you just enter into download mode, connecto to computer, open odin, browse the kernel as PDA, hit start, and let it work. after that you're done. No need to wipe or anything else. just flash
hey guys please please help me .. i have flashed a wrong kernal in my karbonn a21... i am not able to get in the recovery mode... what should i do please reply guys... big trouble... :crying::crying::crying:
UV1994 said:
hey guys please please help me .. i have flashed a wrong kernal in my karbonn a21... i am not able to get in the recovery mode... what should i do please reply guys... big trouble... :crying::crying::crying:
Click to expand...
Click to collapse
Try to get into download mode to flash stock firmware.
Verstuurd van mijn GT-I9000
Even if you flash the kernel in the wrong section, there's no reason why you can't enter download mode to reflash everything again.
twili9ht said:
Try to get into download mode to flash stock firmware.
Verstuurd van mijn GT-I9000
Click to expand...
Click to collapse
nothing happening dude... not able to get in download mode....
Well that's strange. Have you tried the usual tricks like pulling battery and stuff like that?
Sent from my Nexus 4 using Tapatalk 2
UV1994 said:
nothing happening dude... not able to get in download mode....
Click to expand...
Click to collapse
maybe pull battery before restarting into recovery or Download mode
snapper.fishes said:
Well that's strange. Have you tried the usual tricks like pulling battery and stuff like that?
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
yes i have tried that too... but anyways now i have given it to service center and they will give it back in 4 days... hope they dont get to know about the rooting i had done !!!!:fingers-crossed::fingers-crossed::fingers-crossed:
Hello, i own Samsung Galaxy S Plus and i was trying to flash Cyanogenmod 9 Beta 1 on CWM-based recovery v5.5.0.4 and it ended up as when i reload the phone after the Samsung logo's the recovery opens up again, no booting animation.
What can i do? How to fix it?! IS IT POSSIBLE?!!
Please help!
Kramtoske said:
Hello, i own Samsung Galaxy S Plus and i was trying to flash Cyanogenmod 9 Beta 1 on CWM-based recovery v5.5.0.4 and it ended up as when i reload the phone after the Samsung logo's the recovery opens up again, no booting animation.
What can i do? How to fix it?! IS IT POSSIBLE?!!
Please help!
Click to expand...
Click to collapse
here is the fix http://forum.xda-developers.com/showpost.php?p=24831012&postcount=1330 . Good luck !! :good:
Kramtoske said:
Hello, i own Samsung Galaxy S Plus and i was trying to flash Cyanogenmod 9 Beta 1 on CWM-based recovery v5.5.0.4 and it ended up as when i reload the phone after the Samsung logo's the recovery opens up again, no booting animation.
What can i do? How to fix it?! IS IT POSSIBLE?!!
Please help!
Click to expand...
Click to collapse
you may need a i9001 6.0 CWM recovery or Touch CWM recovery for performance, download link on My Android Collections link, below
Amazing! It works!
Running ICS on a full charge, i love you mate
Laurentyu1995 said:
here is the fix http://forum.xda-developers.com/showpost.php?p=24831012&postcount=1330 . Good luck !! :good:
Click to expand...
Click to collapse
Thankss uu i have this problem too thanks so much .. and thanks for [email protected]
bleros said:
Thankss uu i have this problem too thanks so much .. and thanks for [email protected]
Click to expand...
Click to collapse
can someone please advice me i have also stuck in recovery loop i download odin i download the files and then following the steps but odin cannot find the phone when i push the start button i get please connect phones
can u please advice.thanks
@ all: if you have this problem have a look at this thread: http://forum.xda-developers.com/showthread.php?t=2053350
dem012 said:
can someone please advice me i have also stuck in recovery loop i download odin i download the files and then following the steps but odin cannot find the phone when i push the start button i get please connect phones
can u please advice.thanks
Click to expand...
Click to collapse
You must install adb driver first i u dont have them then put in download mode is easy
bleros said:
You must install adb driver first i u dont have them then put in download mode is easy
Click to expand...
Click to collapse
I forgot to turn on usb debugging,will that be affected when using odin? And how long the duration when using odin?
Dear members,
Please help me find a solution to the issue that had occured:
Recently I've flashed CM9 to my i9001 using serial recovery. Now I wanted to change to CM10 but the phone won't go to recovery mode - it goes to download mode automaticly (like recovery doesn't exist enymore). I've tried switching to recovery from ROM and from turned-off phone but still no results. Please help me get the recovery into the phone
nicky_1 said:
Dear members,
Please help me find a solution to the issue that had occured:
Recently I've flashed CM9 to my i9001 using serial recovery. Now I wanted to change to CM10 but the phone won't go to recovery mode - it goes to download mode automaticly (like recovery doesn't exist enymore). I've tried switching to recovery from ROM and from turned-off phone but still no results. Please help me get the recovery into the phone
Click to expand...
Click to collapse
wrong section
just flash back the stock rom and flash recovery
nicky_1 said:
Dear members,
Please help me find a solution to the issue that had occured:
Recently I've flashed CM9 to my i9001 using serial recovery. Now I wanted to change to CM10 but the phone won't go to recovery mode - it goes to download mode automaticly (like recovery doesn't exist enymore). I've tried switching to recovery from ROM and from turned-off phone but still no results. Please help me get the recovery into the phone
Click to expand...
Click to collapse
Next time post in Q&A for such things....anyway you must flash via ODIN CWM again!!
See here http://forum.xda-developers.com/showthread.php?t=1578821
muhammadnajmi96 said:
wrong section
just flash back the stock rom and flash recovery
Click to expand...
Click to collapse
How since I have no way to do that and I only know how to do that with recovery...
nicky_1 said:
How since I have no way to do that and I only know how to do that with recovery...
Click to expand...
Click to collapse
Just read first here how to do that !!!! http://forum.xda-developers.com/showthread.php?t=1901212
nicky_1 said:
How since I have no way to do that and I only know how to do that with recovery...
Click to expand...
Click to collapse
Just download this http://www.mediafire.com/?jg0jjdg8amjlj3b , and select one package
R: [i9001]Need help
Apart that this is a dev section and we have a question and answer thread for this, you should flash a recovery again with Odin and if nothing happens again, I suggest you to flash an entire GB official ROM and restart from zero.
Please, next time use Q&A Thread.
Regrets
Stefano
Sent from my GT-I9001 using xda premium
why you dont go into recovery via terminal emulator?
Hello,
my Galaxy Note GT-N7000 became unbootable after installing latest Cyanogenmod 10.1 update.
I use it to organize myself and I need it back as fast as possible.
I need your help and googeling was unsuccessful.
I hope it is possible to rescue my phone because I dont have much money to buy another phone.
Thanks a lot!
XXY
TheXXY said:
Hello,
my Galaxy Note GT-N7000 became unbootable after installing latest Cyanogenmod 10.1 update.
I use it to organize myself and I need it back as fast as possible.
I need your help and googeling was unsuccessful.
I hope it is possible to rescue my phone because I dont have much money to buy another phone.
Thanks a lot!
XXY
Click to expand...
Click to collapse
can you access recovery mode (volume up+home+power), or download mode (volume down+power+home button)?
I had the exactly same problem like him. But..
treacherous_hawk said:
can you access recovery mode (volume up+home+power), or download mode (volume down+power+home button)?
Click to expand...
Click to collapse
...But , i could access to Download Mode *(Volume Down+Power+Home) , I couldn't get access to Recovery Mode only *(it turns Black Screen & keep me waiting so long) .
I thought problem solves if I couldn't change another Custom Rom , but i can't even BOOT into recovery mode.
THANKS Brothers for solving here, THanks THanks. (I'm urgent for it too..)
Current Rom I hooking is:
Carbon0825
treacherous_hawk said:
can you access recovery mode (volume up+home+power), or download mode (volume down+power+home button)?
Click to expand...
Click to collapse
Download mode: yes
Recovery mode: no
If i had had access to the Recovery mode i wouldnt have startet this thread...
Im absolutly helpless and i cant find a guide which tells me how to reset my phone only with the download mode...
Thanks for replying!
XXY
TheXXY said:
Download mode: yes
Recovery mode: no
If i had had access to the Recovery mode i wouldnt have startet this thread...
Im absolutly helpless and i cant find a guide which tells me how to reset my phone only with the download mode...
Thanks for replying!
XXY
Click to expand...
Click to collapse
Flash philz kernel (.tar) from pc odin while in download mode (latest version). See if you can get into recovery, if you can, download and put the CM rom+gapps on external sd card, flash without any wipes from recovery or if you did take any nandroid backup you can restore that from philz kernel.
treacherous_hawk said:
Flash philz kernel (.tar) from pc odin while in download mode (latest version). See if you can get into recovery, if you can, download and put the CM rom+gapps on external sd card, flash without any wipes from recovery or if you did take any nandroid backup you can restore that from philz kernel.
Click to expand...
Click to collapse
ok... i read though these threads but i dont know how to install philz kernel...
i tried flashing it with odin but the only thing i noticed was that the binary counter increased...
can you tell me step by step what i have to do?
i know that is awful to do...
if you dont whant to write and tell it me than add me in skype: xxyababx12345
Thanks!
XXY
after you have flashed Philz kernel... power off the device... and try to boot into recovery.
TheXXY said:
ok... i read though these threads but i dont know how to install philz kernel...
i tried flashing it with odin but the only thing i noticed was that the binary counter increased...
can you tell me step by step what i have to do?
i know that is awful to do...
if you dont whant to write and tell it me than add me in skype: xxyababx12345
Thanks!
XXY
Click to expand...
Click to collapse
Why should he write it in private? I bet there are several people (including me) sitting in threads like this waiting for a clear answer from people who know what to do.
TheXXY said:
ok... i read though these threads but i dont know how to install philz kernel...
i tried flashing it with odin but the only thing i noticed was that the binary counter increased...
can you tell me step by step what i have to do?
i know that is awful to do...
if you dont whant to write and tell it me than add me in skype: xxyababx12345
Thanks!
XXY
Click to expand...
Click to collapse
download philz kernel from:
http://forum.xda-developers.com/showthread.php?t=1901191
download the one that says .tar instead of .zip. put the phone into download mode. Open PC odin, connect phone to pc, COM ID should light up in yellow with some number. click on PDA and choose the .tar file and click on start. once it is finished, reboot into recovery and see if it works. You can fix the counter and yellow triangle later with Triangle away application.
treacherous_hawk said:
download philz kernel from:
http://forum.xda-developers.com/showthread.php?t=1901191
download the one that says .tar instead of .zip. put the phone into download mode. Open PC odin, connect phone to pc, COM ID should light up in yellow with some number. click on PDA and choose the .tar file and click on start. once it is finished, reboot into recovery and see if it works. You can fix the counter and yellow triangle later with Triangle away application.
Click to expand...
Click to collapse
Is the Kernel version essential? Since Philz v5.11.2 has several Kernels you can choose from, where as you cannot check which one you have running since the phone does not boot anymore.
correct , you're right!
diwako said:
Why should he write it in private? I bet there are several people (including me) sitting in threads like this waiting for a clear answer from people who know what to do.
Click to expand...
Click to collapse
still waiting for a clear answer to proceed the steps.
Philz Kernel may need a LINK here. maybe URL ?
THanks ALL ! feel that solutions are near now.
as you cannot check, you can download the one for your region, check on sammobile.com/firmwares for which one is for your region and i already gave the link to the philz kernel, i wont post the direct url for the file.
Basically got my phone to boot, CWM is still broken, anyway to work with this?
http://i.imgur.com/LahUi87.png
diwako said:
Basically got my phone to boot, CWM is still broken, anyway to work with this?
http://i.imgur.com/LahUi87.png
Click to expand...
Click to collapse
read from last post here and continue:
http://forum.xda-developers.com/showthread.php?t=2386292&page=27
One problem: i dont know which kernel i have...
and i dont understand this:
http://forum.xda-developers.com/showpost.php?p=31911656&postcount=2
where can i find my kernel id?
Thanks!
XXY
TheXXY said:
One problem: i dont know which kernel i have...
and i dont understand this:
http://forum.xda-developers.com/showpost.php?p=31911656&postcount=2
where can i find my kernel id?
Thanks!
XXY
Click to expand...
Click to collapse
It doesn't matter which kernel you flash, you're just flashing to give you recovery and then you can flash cm and gapps. It won't boot, it's not supposed to.
Sent from my GT-N7000 using XDA Premium 4 mobile app
SpyderTracks said:
It doesn't matter which kernel you flash, you're just flashing to give you recovery and then you can flash cm and gapps. It won't boot, it's not supposed to.
Sent from my GT-N7000 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
ok... i flashed the kernel: PhilZ-cwm6-DDLSC-ODD-5.11.2.tar.md5
and tried to boot into recovery mode.
the samsung logo with triangle flashed up for a half a second and i released my fingers from the keys
and then the logo show up again and nothing else happened...
is it possible to reset my phone completely? i only need a bootable phone for now...
Thanks!
XXY
Not sure I'm in the same boat...
is anyone seeing the same as I am - I also can't boot into Recovery since nightly 20130824. I can boot into Download mode... and... I can still boot into my current CM10.2 nightly (20130824)!!!
I've tried reflashing CWM using ROM Manager, even a few times... but nothing changes. Trying to get into recovery using VolUp+Home+Pwr doesn't work (after Samsung GT-N7000 white text... blackscreen (which I can see is still 'on'). If I try to boot into recovery using Rom Toolbox or similar, it behaves the same and I can only get it to reboot into the ROM once I've pulled the battery out and then put it back in and connected to a charger so the battery charging icon shows... which somehow clears the 'boot into recovery' flag somewhere.
Very concerned... saw something in the changelogs back at 20130824 about recovery fixes and wondered if this might happen. The first time I got it to boot back into the ROM something wasn't quite right with the internal/external SD mounts... all my ringtones and alerts etc. were reset to just numbers (e.g. 40125) which actually happens more often than I expect... but this time I couldn't find the ones I usually use in the selection list.
I rebooted with SD card out... then re-inserted it... and then things went back to how they should be and I could see and select my preferred tones again.
Have tried booting into Recovery via app, via hw keys... with SD card in, SD out... SIM card in... SIM out... both SD and SIM out... there's just no way into recovery.
Using ROM Manager I also tried to setup the alternative Recovery (TWRP) but that also gets stuck with the message 'ROM Manager has been set up to use your existing recovery installation'. but same behaviour when trying to boto into recovery.
I've also used Android Root Toolkit to try save/protect Root... Restore Root.. etc. but to no avail.
Any ideas... please?
EDIT: Thanks for the Odin3 / PhilZ Kernel advice - that seemed to work.
Question: Now that I've got back to recovery and updated to nightly of 20130826, did I overwrite PhilZ kernel?
yes
Yes,
ideas:
Read the rom thread, fixes there
Hello,
i am new to the forum and i registered in it in order to have a solution on my problem! I downloaded recenlty cyanogenmod for my mobile for your site http://forum.xda-developers.com/showthread.php?t=2085347
Before i had android 2.3.3 in my phone! The problem is when i flash the rom i get this error: E:Error in /tmp/sideload/package.zip (Status 0)
I have searched the forum for previous similar threads and i followed many of them! However because i am not very expert in these kind of things i was confused in many points of them (for example one which explaned the root of the problem something has to do with the binary update and a script)..And i was not given detailed commands on solving the problem I formatted my sd card (after taking a backup on my pc) and only transfered after, the update for cyanogen mod 10.1 and the one for the google apps but the same problem occured. I desperately need your help because i cant practically use my mobile and i need it...
So please tell me what should i do.
Thank you in advance! Sorry for my bad english
(i also have rooted long time ago my phone)
What recovery do you have?
tomi456 said:
What recovery do you have?
Click to expand...
Click to collapse
how can i see which recovrey do i have?
Turn off your phone, then use volume up+ home + power, then see which recovery.
Is it Samsung recovery, Clock work mod etc......
Don'T ForgeT TO PresS ThankS
Sent from my device GT-S5570I in my own words
biso46 said:
Turn off your phone, then use volume up+ home + power, then see which recovery.
Is it Samsung recovery, Clock work mod etc......
Don'T ForgeT TO PresS ThankS
Sent from my device GT-S5570I in my own words
Click to expand...
Click to collapse
i thins it is samsung recovery! the samsung logo in on the screen and up left:
RANDUMP Mode (ARM9mode)
If you want to flash custom ROMs, you must have custom recovery, like ClockWorkMod, RZ Recovery or TWRP.
You will need to flash it using Odin first, and then you can change recovery by just flashing packages. (You don't must change recovery after you flash from Odin.)
Pavlosd25 said:
i thins it is samsung recovery! the samsung logo in on the screen and up left:
RANDUMP Mode (ARM9mode)
Click to expand...
Click to collapse
He is wrong (again lol). Vol up is not needed. Just power + home. And 99.999% that you have stock recovery.
ast00 said:
He is wrong (again lol). Vol up is not needed. Just power + home. And 99.999% that you have stock recovery.
Click to expand...
Click to collapse
yes sorry i have stock recovery! what should i do?
tomi456 said:
If you want to flash custom ROMs, you must have custom recovery, like ClockWorkMod, RZ Recovery or TWRP.
You will need to flash it using Odin first, and then you can change recovery by just flashing packages. (You don't must change recovery after you flash from Odin.)
Click to expand...
Click to collapse
so can u please provide me with a link for cloworkmod to install? however i must install it from odin because the phone does not boot normally..
Pavlosd25 said:
so can u please provide me with a link for cloworkmod to install? however i must install it from odin because the phone does not boot normally..
Click to expand...
Click to collapse
no need for odin .. just search this forum for cwm 5 and flash it through recovey
Here is it highest version of CWM for your device.
Don'T ForgeT TO PresS ThankS
Sent from my device GT-S5570I in my own words
hey guys its fine! i had clowork mod via odin and now cyanogenmod is running! Howevere now i cant sync with my google account...I think it says somethng about the connection ("Unable to open connection to server") but the wi fi is ok..
PS: Yes I have flashed google apps addon through recovery