Rooted Xperia Sp / bootloader - Xperia SP Q&A, Help & Troubleshooting

Hello everyone,
I have rooted my Xperia SP as someone said in ur forum and all worked fine.
I had the version 4.1 and i wanted to install a Generic version 4.3 that i found in ur forum.
I used flashtool to flash it like it is said in this post " http://forum.xda-developers.com/showthread.php?t=2658952 "
Actually when i was trying to install the 4.3 generic ftf it showed an error while it was fashing it.
Now the phone isnt powering on, i did something wrong i guess ... i even pressed the button that there is in the battery to hard reset the phone but it still isnt opening.I pressed the power button to open it, it showed me the sony logo and after that the phone was powered off again on its own.
So i got these questions :
1)How do i revert my phone to its original state?
2)If my phone is reverted to the 4.1 version, then howdo i install the 4.3 version? via flashtool or via pc companion?
2)Now that my phone is rooted then that means that the bootloader is unlocked too? I havent even tried to unlock it like it is said on a post.
When i connect my phone with USB and i open flashtool it shows me this message and my phone keeps having the green led-light on and this message keeps repeating again and again :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks in advance and sry for the trouble i may have caused you.

I tried to repair my phone via PC Companion but it failed.
My phone keeps showing the sony logo and a green light will be on when i plug it with the USB to my PC.
I want someone to help me solve this problem, i have read some threads but i dont want to damage my phone further so i wont do a thing.
So pls i want someone experienced to help me solve it.
1)I have never tried to flash a custom ROM
2)The only thing that i did is that i rooted my phone ( and it was a success ) as it is said here : http://forum.xda-developers.com/showthread.php?t=2440375
I want to believe that i will fix the Xperia SP with the help of some experienced members.
Thanks again

Hai thanman, good day.
1. You can revert back to the original state by flashing the ftf file again by using flashtool.
2. No. Bootloader unlocking and rooting are two different process.
Now, actually what error does it throws while flashing?

Hi and thank you for you responding to my request.
1)I plug my phone via USB to my PC.
2)Then i press the "thunder icon" -> "flash mode" -> and i choose the generic UK that i downloaded from xda.
3)Normally after that it has to show me to unplug my device and then turn off my phone then replug it by pressing the down volume button ... but that doesnt happen in my case ... it automatically starts flashing like that and after that i got an error
4)lol i cant upload the image cause im newbie in the forum lmao ... give me 2 mins to write the error message

Now. Open flashtool remove your phone from pc if it is connected. Press falsh button. Now select the tft file and wait for it to chace. Then it will ask you to connect your mobile. Now press the hard reset button at the back of the phone. It will restart your phone. At that moment, connect it ti usb cable by press volume down button. It should have to happen fast. If the phone starts to boot, then you cant go into falshmode.
How much battery left in your phone? Did your phone shows charging symbol if it connected to charger?
---------- Post added at 07:24 AM ---------- Previous post was at 07:16 AM ----------
Press the save log button at the right corner of the tool and put it here.

My phone had 95% battery.
lol 5 mins ago that flashtool was running i had an error.I took picture of that error so that i can upload it to you but i have to make 10 post to upload more pictures.So after that i tried to run flashtool again so that i can Copy-Paste all that it was showing ... but instead of showing me an error i got it working fine and now the phone has opened .. lmao wtf happened? im totally confused.
But i want to know what the problem was so the error that was having was this "(A)"
(A) : ERROR- ERR_SEVERITY="MAJOR";ERR_CODE="0009";ERR_DYNAMIC="Block verification failed 0x30000510";
ERROR- Error Flashing. Aborted
1)Now my phone isnt rooted right?
2)Now i got this in the status bar, it shows me a blue bar that says : All ckeckpoints reached
3)I want to upgrade to the 4.3 .201 version and have my phone rooted so that i can delete some bloatware apps and see if the 4.3 is still buggy or not.But i want your advice about that.

First that error message is an random problem. According to what you said flashtool tried to flash without being connected in flashmode. That may be the reason for that error. Only connect the mobile to flashtool when it asks to do.
You can always upgrade using pc companion and update service.
Removing bloats will help with the lag.
Else you can run custom roms too.
---------- Post added at 07:56 AM ---------- Previous post was at 07:54 AM ----------
About that error message in status bar. It was caused by the app com.sonyericsson.startupflagservice.
It will been gone in some moments. Else freeze or delete /system/app/
StartupFlagV2.apk file.

I just open flashtool while my phone is connected with PC and i got this ( i havent run flashtool, i just opened it )
04/038/2014 05:38:24 - INFO - <- This level is successfully initialized
04/038/2014 05:38:24 - INFO - Flashtool Version 0.9.11.0 built on 2013-06-04 22:50:00
04/038/2014 05:38:29 - INFO - Device disconnected
04/038/2014 05:38:40 - INFO - Device connected with USB debugging off
04/038/2014 05:38:40 - INFO - For 2011 devices line, be sure you are not in MTP mode
04/038/2014 05:38:41 - INFO - Device connected with USB debugging on
04/038/2014 05:38:41 - INFO - Connected device : Sony Xperia SP
04/038/2014 05:38:41 - INFO - Installed version of busybox : N/A
04/038/2014 05:38:41 - INFO - Android version : 4.1.2 / kernel version : / Build number : 12.0.A.2.254
04/038/2014 05:38:41 - INFO - Phone in recovery mode
04/038/2014 05:38:41 - INFO - Root Access Allowed
04/038/2014 05:38:42 - INFO - Device disconnected
Is that good?

No problem until flashtool flashes anything

How can flashtool says " Root access allowed? i have flash a generic ftf .. how can my phone still be ruted ? :S

Try root checker basic app from playstore and confirm whether it is still rooted.

Related

[Q] installing Device Error. Flashtool

Hey guys,
I have an Xperia TL running At&T's firmware and I wanted to flash Xperia T's firmware using flashtool. The problem here is that the drivers are not being installed, and I get this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and when I try to flash Xperia T's firmware I get this from Flashtool:
25/015/2013 15:15:45 - ERROR -
25/015/2013 15:15:45 - ERROR - Error flashing. Aborted
can anyone help me out here?
btw... am running windows 8
Thanks!
FRKD said:
Hey guys,
I have an Xperia TL running At&T's firmware and I wanted to flash Xperia T's firmware using flashtool. The problem here is that the drivers are not being installed, and I get this
and when I try to flash Xperia T's firmware I get this from Flashtool:
25/015/2013 15:15:45 - ERROR -
25/015/2013 15:15:45 - ERROR - Error flashing. Aborted
can anyone help me out here?
btw... am running windows 8
Thanks!
Click to expand...
Click to collapse
did u try change ur usb port? for my example, my USB 3.0 are not able detect my phone, but change to USB 2.0 work perfectly
emperror123 said:
did u try change ur usb port? for my example, my USB 3.0 are not able detect my phone, but change to USB 2.0 work perfectly
Click to expand...
Click to collapse
oh... didn't think of that. my PC only has 3.0.... i guess i'll have to try it on a different computer.... Thanks!
FRKD said:
Hey guys,
I have an Xperia TL running At&T's firmware and I wanted to flash Xperia T's firmware using flashtool. The problem here is that the drivers are not being installed, and I get this........
Thanks!
Click to expand...
Click to collapse
Flashtool's drivers will fail when installing on Windows 8. This is because Windows 8 has some driver verification crap. To turn this feature off, go to the bottom-right corner of your screen to get that stupid bar to appear. Click Settings. Then at the very bottom, choose "Change PC Settings". Then go to General. Then scroll it down to the bottom (Advanced start-up). This will require a restart to show you the options. Do that and you will see "Troubleshoot". Click it. Then "Advanced Options". Then "start-up settings". Then hit the Restart button (again - grrrrrr...) When you see the Startup Settings screen, you'll see option 7 is to disable the driver signature enforcement. Hit F7 to do it. Then it will boot into Win8. Now you can finallyrun the Flashtool Drivers install to install your drivers (flashmode, fastboot, the specific one for your phone, etc.) You will notice that it will ask you a few times if you're sure you want to install the unsigned drivers. Say yes. Once it's all done, restart the machine and you can flash away.
LaZiODROID said:
Flashtool's drivers will fail when installing on Windows 8. This is because Windows 8 has some driver verification crap. To turn this feature off, go to the bottom-right corner of your screen to get that stupid bar to appear. Click Settings. Then at the very bottom, choose "Change PC Settings". Then go to General. Then scroll it down to the bottom (Advanced start-up). This will require a restart to show you the options. Do that and you will see "Troubleshoot". Click it. Then "Advanced Options". Then "start-up settings". Then hit the Restart button (again - grrrrrr...) When you see the Startup Settings screen, you'll see option 7 is to disable the driver signature enforcement. Hit F7 to do it. Then it will boot into Win8. Now you can finallyrun the Flashtool Drivers install to install your drivers (flashmode, fastboot, the specific one for your phone, etc.) You will notice that it will ask you a few times if you're sure you want to install the unsigned drivers. Say yes. Once it's all done, restart the machine and you can flash away.
Click to expand...
Click to collapse
Awesome that worked flawlessly!
I've installed the drivers but I still get this error log in flashtool:
Preparing files for flashing
27/044/2013 15:44:11 - INFO - Please connect your device into flashmode.
27/044/2013 15:44:23 - INFO - Device connected in flash mode
27/044/2013 15:44:24 - INFO - Opening device for R/W
27/044/2013 15:44:24 - INFO - Start Flashing
27/044/2013 15:44:24 - INFO - Processing loader
27/044/2013 15:44:24 - INFO - Checking header
27/044/2013 15:44:24 - INFO - Ending flash session
27/044/2013 15:44:24 - ERROR -
27/044/2013 15:44:24 - ERROR - Error flashing. Aborted
my device goes into flashmode for like 3 seconds and boots normally afterwards....... and my computer doesn't recognize my phone when it's in flashmode....
any ideas?
btw, my bootloader unlock status is NO. does that prevent me from flashing a different firmware?
thanks again
FRKD said:
Awesome that worked flawlessly!
I've installed the drivers but I still get this error log in flashtool:
Preparing files for flashing
27/044/2013 15:44:11 - INFO - Please connect your device into flashmode.
27/044/2013 15:44:23 - INFO - Device connected in flash mode
27/044/2013 15:44:24 - INFO - Opening device for R/W
27/044/2013 15:44:24 - INFO - Start Flashing
27/044/2013 15:44:24 - INFO - Processing loader
27/044/2013 15:44:24 - INFO - Checking header
27/044/2013 15:44:24 - INFO - Ending flash session
27/044/2013 15:44:24 - ERROR -
27/044/2013 15:44:24 - ERROR - Error flashing. Aborted
my device goes into flashmode for like 3 seconds and boots normally afterwards....... and my computer doesn't recognize my phone when it's in flashmode....
any ideas?
btw, my bootloader unlock status is NO. does that prevent me from flashing a different firmware?
thanks again
Click to expand...
Click to collapse
Did you try change other USB port?
Answer: if USB port problem test every port u plug in if tat work perfectly then remember use tat port when u wan flash ur phone
If not, check your phone and see allow you to unlock?
If not allow to unlock mean u cannot use whatever tool to unlock ur phone follow below step to check
Dial *#*#7378423#*#*. Go to Service info → Configuration.
Bootloader unlock allowed - Yes: bootloader is locked. Unlock possible.
Bootloader unlock allowed - No: bootloader is locked. Unlock impossible.
Bootloader unlock - Yes: bootloader is unlocked.
Sent from my LT25i using xda app-developers app
"Bootloader unlock allowed: NO"
does that mean I can't flash a different firmware? Or even root?
FRKD said:
"Bootloader unlock allowed: NO"
does that mean I can't flash a different firmware? Or even root?
Click to expand...
Click to collapse
Which mean u cannot unlock ur phone anymore and not able to root ur phone
Sent from my LT25i using xda app-developers app
emperror123 said:
Which mean u cannot unlock ur phone anymore and not able to root ur phone
Sent from my LT25i using xda app-developers app
Click to expand...
Click to collapse
I get that. But I can't flash any other firmware either?
FRKD said:
I get that. But I can't flash any other firmware either?
Click to expand...
Click to collapse
You may try, but mostly cannot use other firmware since most of it need to be unlock
Sent from my LT25i using xda app-developers app
emperror123 said:
Which mean u cannot unlock ur phone anymore and not able to root ur phone
Sent from my LT25i using xda app-developers app
Click to expand...
Click to collapse
Wrong,
It just means you cannot unlock the bootloader.
You can still root, flash ftf, install recovery and flash stock based roms.
The only thing you cannot do is flash custom kernels, so Ron's like CM, MIUI, etc cannot be flashed as they require custom kernels
Edit
Plus you do not even need to be rooted to flash ftf our use flash tool
Sent from my LT30p using xda premium
FRKD: Are you using the stock Sony usb cable that came with your phone? Mine will not flash FTF's successfully unless I'm using it.
LaZiODROID said:
FRKD: Are you using the stock Sony usb cable that came with your phone? Mine will not flash FTF's successfully unless I'm using it.
Click to expand...
Click to collapse
Hmm I use Nokia USB cable and flash ftf successful
Sent from my LT25i using xda app-developers app
gregbradley said:
Wrong,
It just means you cannot unlock the bootloader.
You can still root, flash ftf, install recovery and flash stock based roms.
The only thing you cannot do is flash custom kernels, so Ron's like CM, MIUI, etc cannot be flashed as they require custom kernels
Edit
Plus you do not even need to be rooted to flash ftf our use flash tool
Sent from my LT30p using xda premium
Click to expand...
Click to collapse
oh thank you! but why is it not working? I tried a different computer and got the same thing....
LaZiODROID said:
FRKD: Are you using the stock Sony usb cable that came with your phone? Mine will not flash FTF's successfully unless I'm using it.
Click to expand...
Click to collapse
My stock cable doesn't work anymore... so I have to use a different one. I really hope that isn't the problem
emperror123 said:
Hmm I use Nokia USB cable and flash ftf successful
Sent from my LT25i using xda app-developers app
Click to expand...
Click to collapse
I'll try different cables just to make sure
edit: I used different cables and same thing happened. the thing is that I don't get into flashmood just by pressing the volume down button and letting it go. that doesn't work. I have to press the down button then connect the cable then press the power button with the volume down button. and i get into flash mood for like 3-5 seconds only
Thanks guys
edit: I used different cables and same thing happened. the thing is that I don't get into flashmood just by pressing the volume down button and letting it go. that doesn't work. I have to press the down button then connect the cable then press the power button with the volume down button. and i get into flash mood for like 3-5 seconds only
Thanks guys
Click to expand...
Click to collapse
OK, with the possibility that the cable or USB port *may* not be fully compatible for flashing FTF's, lets also check the following:
1) Are you certain that Sony PC Companion is not running in the background? I have heard that it can interfere with the operation. Check your system tray and also your Windows Task Manager to make sure it's not running.
2) Are you using the latest Flashtool version? There is a sticky in the Development forum ( here ) that has 0.9.11.0. If you don't have this version, I suggest uninstalling your current version, and installing this one. Also dont forget to install the 3 drivers from this version (Flashmode / Fastboot / Your Device).
3) Not sure if this is important, but - Have you installed Flashtool to a simple path? I have mine installed in C:\temp\flashtool
4) When flashing: You load the FTF in Flashtool, let it process whatever files it needs, and then it pops up a window to tell you to connect. To connect your phone in flashmode, make sure it is off, then hold the VolDown button, and while still holding it down, connect the USB cable to the phone. When you see in Flashtool that flashing has started, you can let go of the button.
I hope this helps.
LaZiODROID said:
OK, with the possibility that the cable or USB port *may* not be fully compatible for flashing FTF's, lets also check the following:
1) Are you certain that Sony PC Companion is not running in the background? I have heard that it can interfere with the operation. Check your system tray and also your Windows Task Manager to make sure it's not running.
2) Are you using the latest Flashtool version? There is a sticky in the Development forum ( here ) that has 0.9.11.0. If you don't have this version, I suggest uninstalling your current version, and installing this one. Also dont forget to install the 3 drivers from this version (Flashmode / Fastboot / Your Device).
3) Not sure if this is important, but - Have you installed Flashtool to a simple path? I have mine installed in C:\temp\flashtool
4) When flashing: You load the FTF in Flashtool, let it process whatever files it needs, and then it pops up a window to tell you to connect. To connect your phone in flashmode, make sure it is off, then hold the VolDown button, and while still holding it down, connect the USB cable to the phone. When you see in Flashtool that flashing has started, you can let go of the button.
I hope this helps.
Click to expand...
Click to collapse
for the 1st USB port i agree what he said because my pc USB 2.0 only can flash my phone while USB 3.0 USB device not recognized
for the 4 may be u can see This
still not working....... even when I try the repair function on PC companion, my phone doesn't go into flashmode.....
FRKD said:
still not working....... even when I try the repair function on PC companion, my phone doesn't go into flashmode.....
Click to expand...
Click to collapse
Hmm...is it possible the battery is dead? I remember having trouble flashing with very low % (it was a stupid move). I plugged the phone in (wall charger) overnight and it flashed fine the next day.
Also Im not sure if it was mentioned - what is the filename of the FTF youre trying to flash?
Sent from my LT30p using xda app-developers app
FRKD said:
still not working....... even when I try the repair function on PC companion, my phone doesn't go into flashmode.....
Click to expand...
Click to collapse
try not to flash ur phone with less than 50%, flash ur phone at least 80% of battery, because during flash your phone, the battery will drain very very fast
I tried flashing at 100% .....
Still nothing. U guys have any other suggestions?
just to add here, my device doesn't charge when turned off..... I think that's the problem. you guys think I should I send it to Sony for a fix?

[Q] [Help] Hard Bricked Xperia PC Recognizes as "qhsusb_dload"

Is there any solution?
DUMB ERROR HERE!!!!
I was flashing a rom but i make a big mistake and install another rom instead,( i use my phone as a usb sometimes! i forget to delete this rom from my sd card) :crying: MIUI for GALAXY S3 or something! Battery was over 86%
PROBLEMS:
1- No Leds (NO is NO!)
2- Phone doesnt vibrate ( not even hard keys combos, not anyones! )
3- Conecting to PC and PC doesn recognize Phone Sound alert for usb not dirvers
4- device manager shows my phone as "qhsusb_dload" with yellow alert for no drivers.
5- Flashtool doesnt see my phone on eny mode Fastboot or Flashtool
Any help?
I hope find a method to trick the driver an tell my pc is a XPERIA Z....
Any solutions?
THANX IN ADVANCE GUYS!
I also had that prob before after my phone get into the water. What i mean is water damage. What i did is leave the phone around 1 to 2 days.then charge it.miracles happen,my phone suddenly boot up.
Sent from my C6603 using xda app-developers app
mcyorian said:
Is there any solution?
DUMB ERROR HERE!!!!
I was flashing a rom but i make a big mistake and install another rom instead,( i use my phone as a usb sometimes! i forget to delete this rom from my sd card) :crying: MIUI for GALAXY S3 or something! Battery was over 86%
PROBLEMS:
1- No Leds (NO is NO!)
2- Phone doesnt vibrate ( not even hard keys combos, not anyones! )
3- Conecting to PC and PC doesn recognize Phone Sound alert for usb not dirvers
4- device manager shows my phone as "qhsusb_dload" with yellow alert for no drivers.
5- Flashtool doesnt see my phone on eny mode Fastboot or Flashtool
Any help?
I hope find a method to trick the driver an tell my pc is a XPERIA Z....
Any solutions?
THANX IN ADVANCE GUYS!
Click to expand...
Click to collapse
install usb drivers manually
if u r on win8 u should know to disable driver signature and etc (all tutorials are available)
then to find solution calm down, and check what did u do exactly step by step
not deleting another rom (i m opinion) cannot cause hard-brick cause almost of custom recoveries wipe everything themselves before start to flash new rom...
:good:
x102x96x said:
install usb drivers manually
if u r on win8 u should know to disable driver signature and etc (all tutorials are available)
then to find solution calm down, and check what did u do exactly step by step
not deleting another rom (i m opinion) cannot cause hard-brick cause almost of custom recoveries wipe everything themselves before start to flash new rom...
:good:
Click to expand...
Click to collapse
im not sure its so simply as connect the phone to charge, i mean, the phone was flashed by a rom designed for another phone!...
SONY XPERIA Z flashed by accident with a customn miui rom for GALAXY S3, as a result the phone is dead, no minimal responses, no vibs, or led, flashtool doesn works, and the only thing is the phone is seen bypc as "qhsusb_dload" unknown decvice.
About manually installed drivers... whats drives? Sorry for my english and thanks a lot for tour help!
mcyorian said:
im not sure its so simply as connect the phone to charge, i mean, the phone was flashed by a rom designed for another phone!...
SONY XPERIA Z flashed by accident with a customn miui rom for GALAXY S3, as a result the phone is dead, no minimal responses, no vibs, or led, flashtool doesn works, and the only thing is the phone is seen bypc as "qhsusb_dload" unknown decvice.
About manually installed drivers... whats drives? Sorry for my english and thanks a lot for tour help!
Click to expand...
Click to collapse
i don know what device is for xperia
but sth called Box is for galaxies that can reinstall rom from initial binaries... so it can help to recover almost dead phone
and some special tools again for galaxies, like g-tag or ...
i know them cause i hard-bricked my s3
But i didn't have any access to these tools... so my my s3 pasted away...
for ur situation; search more for these kindda tools and take it asap to pro. service or professional hardware engineer
good luck
:good:
Do you have ADB set up? See if ADB recognizes fastboot mode. Then maybe you can fastboot flash. But as far as I can tell with my limited knowledge the bootloader seems to be corrupted, which is probly irrepairable. Maybe you can get some of the real devs to help you if you ask nicely enough, I'm just a lurker...
mcyorian said:
Is there any solution?
DUMB ERROR HERE!!!!
I was flashing a rom but i make a big mistake and install another rom instead,( i use my phone as a usb sometimes! i forget to delete this rom from my sd card) :crying: MIUI for GALAXY S3 or something! Battery was over 86%
PROBLEMS:
1- No Leds (NO is NO!)
2- Phone doesnt vibrate ( not even hard keys combos, not anyones! )
3- Conecting to PC and PC doesn recognize Phone Sound alert for usb not dirvers
4- device manager shows my phone as "qhsusb_dload" with yellow alert for no drivers.
5- Flashtool doesnt see my phone on eny mode Fastboot or Flashtool
Any help?
I hope find a method to trick the driver an tell my pc is a XPERIA Z....
Any solutions?
THANX IN ADVANCE GUYS!
Click to expand...
Click to collapse
qhsusb_dload= qualcomm driver needed(but it wont change any thing). Only boot repair can solve this problem nothing else.
Ask riff box users about help.
robdevil said:
qhsusb_dload= qualcomm driver needed(but it wont change any thing). Only boot repair can solve this problem nothing else.
Ask riff box users about help.
Click to expand...
Click to collapse
Thanks!!! where can i find these people ? (riff Box Users?)
@[NUT] has a disaster recovery thread. He may be able to work some magic for you :fingerscrossed:
Sent from my C6603 using xda app-developers app
shoey63 said:
@[NUT] has a disaster recovery thread. He may be able to work some magic for you :fingerscrossed:
Sent from my C6603 using xda app-developers app
Click to expand...
Click to collapse
We where actually already working on a possible solution, he found my thread on his own
Help Needed
mcyorian said:
Thanks!!! where can i find these people ? (riff Box Users?)
Click to expand...
Click to collapse
have you found any solution because I am experiencing the same issue
Same Problem
Hi friends I have the Same problem With my xparia lt26w (acro s)
I think when the device has no kernel same thing would happen.
As I know Samsung users Made a program that save phones from Hard brick
Is there any way to write the same program for xperia devices???
Or If any boady knows a box that support Sony devices boot Repair???
I try riff 2014 box but Nothing happend and Not supported.
Any help Frome Developers plz???
I have the same problem, I try to install another rom on SXZ. I try QSTP and HDDrawCopy, but I need the files of bootloader for fix this issue, but I don't know where to find it.
This is my post http://forum.xda-developers.com/showthread.php?t=2639444
UPDATE
has been long time since my XZ was bricked, thanx to XDA community for help (specially @[NUT] ) but my phone was pretty dead ...
i left my phone alone by a month and go to vacations, now im back and put my phone to wall charger.... AND ****!
i got a red light!!!!!
i know there is no hope but, the phone was very unresponsive!!! and now i have a temporal red light,
the red led, turn on and was on by 5 minutes and then off, but when i press power button the led flashes acouple of times and off,
i put the phone on a pc, and the les turns on, but i still cant get flashmode work... i was triying on pc even with custom drivers by @[NUT] but no luck
the phone still doesnt get flashmode on. the phone on pc keep showing it as a qualcom **** device or somethig so.
Now, im a mac user, and ohhhh surprise! on mac the device get 2 different status...
1 - when connect to a mac and press the power button it says :
Sony Ericcsson Mobile Communications AB
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2- When try to get flash mode on it shows:
0x05c6 (Qualcom, Inc)
Unfortunately my flashtool on mac start to fail and i cant run it .. ( force close ?) ill try to reinstall the app
if you know how to help me on this new plataform or on a pc THNX guys!!!
if you have suggestions or tricks to try this XZ back to life it would be very appreciate!
Sorry for my english ....and thanx guys!
Try to contact @the_laser, who made the Z1 hardbrick recovery software: http://forum.xda-developers.com/showthread.php?t=2646405
As long as it's only your bootloader which has been screwed up, you will have every chance he might be able to fix it.

xperia SP dead! please help

1- i have a xperia SP and i connect to charger!
2- after 1 minutes phone power off automatic & showing a picture like this :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i want to flash a stock rom with flashtools, but flash tools cant flash it!
flashtools only know phone in fastboot mode correctly!
but in flashmode there is a unknow problem!
i can't boot device & can't flash it! flashtools & other ways can't flash it! i don't know for what!
but flashtools can't connect correctly to device!
i test it in other PC but no any change happend!
i know there is a problem with flashmode, but i don't know what is it!
driver install correctly & i know what i doing
so please don't say basic work
thanks for any help
Try Sony Update Service. Download from their website, install and try
i try it but even don't know phone when connect it in flashmode!
Start up Sony Update Service, select your phone and follow the stepps. At one point you'll see this pic:
Remove the backcover. If you look closely you'll see a tiny yellow button.. Use a pen or paperclip to push and hold it for a few second to turn it off (will take some time and patience because our phone has its own will xD and will boot up again) Plug in cable into phone and into pc and press volume down untill you see a green light. This indicates flashmode.
If it goes well the programm should start doing its download and flash work
the green light is showing but Sony Update Service don't start flashing & it remaining in your screenshot stat!
Got a picture for me?
On second thought:
You got flashtool installed? (and thus the drivers located in C:\Flashtool\drivers?)
picture is like post 4#
yes i install it & drivers
I mean of your phone? I mean if the phone is connected into flashmode it should work.. So I dont understand why it wont work...
@amir_n71, did you download a firmware to use with Flashtool?
yes i download
And tried ofcourse...
Prior issue now is we need to get the phone into working flashmode so that Flashtool or Sony Update Center can reflash the Firmware...
Just to be sure, did you:
a. Check if your battery had enough juice left for flashing and, if not, tried to recharge it,
b. Try to enter recovery by powering on the phone while holding Volume Down button (if you had a recovery previously installed),
c. Use a Windows computer,
d. Exit and kill any running ADB processes (Sony Update Service and PC Companion included) before trying to flash with Flasthool?
and then:
1. Power off the phone (using side power button OR by pressing the Off button under the battery cover),
2. Download latest Flashtool,
3. Install FT AND flashmode and fastboot drivers,
4. Download a suitable official firmware in a form of a .FTF file (full firmware, not just a kernel),
5. Copy that firmware to the "firmwares" folder in FT's install directory,
6. Start FT, click on a "lightning" icon, wait for the proram to finish its thing, select the firmware you downloaded, click on "Flash", connect the phone to a USB port while powered off and holding Volume Down button until FT started the flashing process?
Is that a xperia sp?
Sent from my C5303 using XDA Free mobile app
No a Xperia with same issue as op he used it as picture to show his issue
Sent because I pressed enter
yes it is xperia sp
i use any way but i don't know for what can't flash it
in flashtools when i connect device must say a xperia sp connected and model nomber is c5302
but flashtools not say xperia sp & worng model number is showing
look at this :
flashing started but waiting in this state : Reading device information
amir_n71 said:
yes it is xperia sp
i use any way but i don't know for what can't flash it
in flashtools when i connect device must say a xperia sp connected and model nomber is c5302
but flashtools not say xperia sp & worng model number is showing
look at this :
flashing started but waiting in this state : Reading device information
Click to expand...
Click to collapse
Just disconnect and reconnect. I got that a lot with my Xperia ray
Verstuurd vanaf mijn C5303 met Tapatalk
i tried but no answering!
ADB drivers: None
Fastboot Drivers: None
I suggest you reinstall Flashtool. It misses some drivers. (perhaps the cause?)
And also update Flashtool... See their thread and website
i installed latest version from flashtools website!
Now install fastboot and flashmode drivers that came with Flashtool. Open "drivers" folder, run that single EXE file, select fastboot and flashmode from the list and install them.
And be careful to run the correct version of Flashtool on your system! Run "flashtool64.exe" on a 64bit Windows, and "flashtool.exe" if you have a 32bit Windows OS.

[Q] Problems with unlocking bootloader for Sony Xpera SP

I'm having problems unlocking the bootlaoder for my Sony Xpera SP.
The part I'm getting stuck at is where I'm supposed to connect my phone in fastboot mode to the PC.
I've tried installing a bunch of drivers everywhere, followed guides and stuff, but whatever I do, I can't get the phone in proper fastboot mode.
The flashtool says:
"Drivers need to be installed for connected device.
You can find them in the drivers folder of Flashtool."
First off, I can't even find the drivers for Sony Xperia SP, but there are tons for the S and P versions.
But when I try installing those drivers it still doesn't work.
I just want to install CM 11 on it, though I never thought it would be this much work.. I've been trying to fix this for over 5 hours already.
It would be really nice if anyone could help me through this.
xpopy said:
I'm having problems unlocking the bootlaoder for my Sony Xpera SP.
The part I'm getting stuck at is where I'm supposed to connect my phone in fastboot mode to the PC.
I've tried installing a bunch of drivers everywhere, followed guides and stuff, but whatever I do, I can't get the phone in proper fastboot mode.
The flashtool says:
"Drivers need to be installed for connected device.
You can find them in the drivers folder of Flashtool."
First off, I can't even find the drivers for Sony Xperia SP, but there are tons for the S and P versions.
But when I try installing those drivers it still doesn't work.
I just want to install CM 11 on it, though I never thought it would be this much work.. I've been trying to fix this for over 5 hours already.
It would be really nice if anyone could help me through this.
Click to expand...
Click to collapse
You'll need to run the installer located within Flashtool install directory. It seems you are currently run Windows. Assuming you did not change the install path, you can find Flashtool in the root of your local hard disk. Navigate to C:\Flashtool\drivers and then execute the installer there in. Tick "Flashmode drivers" and "Fastboot drivers" cause obviously you'll require it. Scroll down a bit and tick "Common drivers for Viskan board". This will install proper flash drivers.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Afterwards for the exclusive driver for your SP (I am assuming you're on stock), Open PC Companion (install it if you don't have it) then connect your Xperia SP with your cable. This will install the drivers for your SP. If you have done this before, you actually already have the drivers installed.
Note that if above methods are well executed by you, you'll find out on the first connect, flashtool will detect the phone partially and somehow later it disconnects. Don't worry, somehow through this process your computer might be installing additional drivers. Retry to connect your Xperia SP.
Above all, do note that in order to unlock the bootloader, you'll need to connect your phone in flashmode. To do so, when prompted, while the phone in its powered down state, hold the volume down button then connect the cable to your phone.
Thanks a lot!
I'm not sure what the problem was, but over the night + installing PC Companion fixed it. Finally CM 11 is mine
xpopy said:
Thanks a lot!
I'm not sure what the problem was, but over the night + installing PC Companion fixed it. Finally CM 11 is mine
Click to expand...
Click to collapse
Glad it worked out for you
device starts charging immediately after entering fastboot mode.
TechnoSparks said:
You'll need to run the installer located within Flashtool install directory. It seems you are currently run Windows. Assuming you did not change the install path, you can find Flashtool in the root of your local hard disk. Navigate to C:\Flashtool\drivers and then execute the installer there in. Tick "Flashmode drivers" and "Fastboot drivers" cause obviously you'll require it. Scroll down a bit and tick "Common drivers for Viskan board". This will install proper flash drivers.
Afterwards for the exclusive driver for your SP (I am assuming you're on stock), Open PC Companion (install it if you don't have it) then connect your Xperia SP with your cable. This will install the drivers for your SP. If you have done this before, you actually already have the drivers installed.
Note that if above methods are well executed by you, you'll find out on the first connect, flashtool will detect the phone partially and somehow later it disconnects. Don't worry, somehow through this process your computer might be installing additional drivers. Retry to connect your Xperia SP.
Above all, do note that in order to unlock the bootloader, you'll need to connect your phone in flashmode. To do so, when prompted, while the phone in its powered down state, hold the volume down button then connect the cable to your phone.
Click to expand...
Click to collapse
once i enter the fastboot mode by pressing vol up key, it shows blue light and after some 5secs it starts charging. how to solve this?

Sony XPERIA SP dead after Lollipop upgrade ( Please help )

Dear my phone is not working after i implement the procedure in the one video, there is no display at all. when i am pressing power button it just vibrate once, blue light flashes it goes off without any response.. Please PLEASE PLEASE help me out
sheikhsaadjamal said:
Dear my phone is not working after i implement the procedure in the one video, there is no display at all. when i am pressing power button it just vibrate once, blue light flashes it goes off without any response.. Please PLEASE PLEASE help me out
Click to expand...
Click to collapse
The easiest way to restore your phone is repairing it using Sony pc companion.. Here you are a step by step guide to do that:
1- Go to Xperia SP page on Sony mobile website and download PC Companion then install it on your PC.
2- Turn off your phone by pressing the small yellow button on the back untill it vibrats 3 times.
3- Open PC Companion on your PC.
4- Start "Support zone" and wait untill download finish.
5- Next, choose "Phone Software Updates".
6- You will see a message asking you to connect your handset while powered on, just ignore these connection instructions. And press the blue link which states "Repair Phone/tablet.”
7- Follow the on screen steps appear next.
8- When you asked to connect your phone (still powered off), make sure that you press and hold the key stated on screen before connecting the phone and keep it held down as you connect.
9- The repair process should now begin.
Note: this process will remove any data stored on your phone's internal storage.
Best regards
Sent from my Xperia SP using Tapatalk
Dear,
I am getting the below error at the last step when PC companion is about to detect my phone.
SONY UPDATE ENGINE FAILURE ( error 2003 )
Please help...
OsGhaly said:
The easiest way to restore your phone is repairing it using Sony pc companion.. Here you are a step by step guide to do that:
1- Go to Xperia SP page on Sony mobile website and download PC Companion then install it on your PC.
2- Turn off your phone by pressing the small yellow button on the back untill it vibrats 3 times.
3- Open PC Companion on your PC.
4- Start "Support zone" and wait untill download finish.
5- Next, choose "Phone Software Updates".
6- You will see a message asking you to connect your handset while powered on, just ignore these connection instructions. And press the blue link which states "Repair Phone/tablet.”
7- Follow the on screen steps appear next.
8- When you asked to connect your phone (still powered off), make sure that you press and hold the key stated on screen before connecting the phone and keep it held down as you connect.
9- The repair process should now begin.
Note: this process will remove any data stored on your phone's internal storage.
Best regards
Sent from my Xperia SP using Tapatalk
Click to expand...
Click to collapse
sheikhsaadjamal said:
Dear,
I am getting the below error at the last step when PC companion is about to detect my phone.
SONY UPDATE ENGINE FAILURE ( error 2003 )
Please help...
Click to expand...
Click to collapse
You're getting this error because your phone bootloader is unlocked, so you need to relock it again to use pcc.
Or you can use Emma by Sony for unlocked boot loader phones, download it from this link:
http://developer.sonymobile.com/services/flash-tool/how-to-download-and-install-the-flash-tool/
Sent from my Xperia SP using Tapatalk
Dear,
Actually i am full of issues.
I connect the phone to emma and apply service, it started downloading the software but after 90% my phone got disconnected and red light is appearing now.
I try to charge my phone last night through wall socket but it didn't charge as there was no light indication but it left it for 2-3 hours and now when i am connecting it with the PC its giving red light please help dear........
thanks in advance
---------------------------------------------------------------
sheikhsaadjamal said:
Dear my phone is not working after i implement the procedure in the one video, there is no display at all. when i am pressing power button it just vibrate once, blue light flashes it goes off without any response.. Please PLEASE PLEASE help me out
Click to expand...
Click to collapse
Finally i am able to flash my phone.. Please see the below log..
27/054/2015 20:54:36 - INFO - Start Flashing
27/054/2015 20:54:36 - INFO - Processing loader.sin
27/054/2015 20:54:36 - INFO - Checking header
27/054/2015 20:54:36 - INFO - Flashing data
27/054/2015 20:54:37 - INFO - Processing of loader.sin finished.
27/054/2015 20:54:38 - INFO - Loader : S1_Root_7054 - Version : R5G006 / Boot version : R11B023 / Bootloader status : ROOTED
27/054/2015 20:54:39 - INFO - No bootdelivery to send
27/054/2015 20:54:41 - INFO - Flashing preset.ta
27/054/2015 20:54:41 - INFO - Writing TA unit : [00, 00, 08, B2, 00, 00, 00, 02, 00, 00]
27/054/2015 20:54:42 - INFO - Ending flash session
27/054/2015 20:54:42 - INFO - Flashing finished.
After flashing i started to repair through PC companion again and i get below error.
** There is no update for your device
Still my phone is unresponsive ........ Please please please help me out...
thank you
sheikhsaadjamal said:
Dear,
Actually i am full of issues.
I connect the phone to emma and apply service, it started downloading the software but after 90% my phone got disconnected and red light is appearing now.
I try to charge my phone last night through wall socket but it didn't charge as t here was no light indication but it left it for 2-3 hours and now when i am connecting it with the PC its giving red light please help dear........
thanks in advance
---------------------------------------------------------------
Click to expand...
Click to collapse
try flastool
try flashtool to only flash kernel (with recovery like tangerine etc, only elf extension file)& after that flash any custom rom from recovery.
or you could use flashtool to flash stock image from pc.
---------- Post added at 06:51 PM ---------- Previous post was at 06:04 PM ----------
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
---------- Post added at 06:58 PM ---------- Previous post was at 06:51 PM ----------
initially open flasher as adimn rights in windows

Categories

Resources