Hello,
i need your help to get my HP Touchpad alive. I tried a lot of the tipps around but no one with success.
My problem starts since i tryed to delete the personal settings and restore to factory setting.
Now the Touchpad is only recogniced as H:/ in Windows 7 (USB) and when i go to Device Manager it's a Palm Device Module.
I can switch to Usb-mode (Power +Loudness) and it's possible to connect with Novaterm.
The WebOSDoctor runs only at 4% and stops then without rebooting.
When i start the Pad, there comes a structured screen with a cloudy blue sky and a grey, round button rotating endless. Thats it.
When i connect the Pad to an Ubuntu-Notebook, it's different, because i see the complete structure (apps. pictures, etc).
How can i repair the boot-loop? I also tried the new Touchpad-Program, it starts but i get no menue to decide.
Thanks for any help!
Related
I have had a bastard of a time trying to flash in windows 7 with virtual xp. It just kept giving me errors everytime I would try to flash any rom. I'm going with hornet right now though after the fix. Anyway, I noticed that under the 'USB' tab in the virtual XP window that it was listed as 'generic rndis' and would let me attach it or release it. So I tried manually booting my phone while unplugged this time using the camera button and comm button (both buttons on camera side of phone at once) and then press reset button while holding other two and then let go. It should boot into 3 color bootloader while still unplugged and then plug it in. After that, go to the 'USB' tab in your virtual XP window and it should show up as unknown or unspecified device this time instead of generic rndis. Attach the device if it says it's unknown/unidentied and then it should actually finally flash for once in a lifetime. I hope this helps b/c absolutely nothing but running xp on another drive would work for my 8125.
EDIT! I almost forgot, you probably have to delete your partnership with the phone under windows 7 mobile device center too. I did it that way so it might be necessary.
My sister transferred the android files and ran the install on my touchpad without checking to see if it was in developer mode (I don't know if that is relevant) after she ran the install it came up with an error, turned off, and now it is stuck at the hp logo when you first turn it on.
When I hold the power button the screen turns off, when I hold it again it turns on but it's stuck at the logo.
We tried webos doctor but it was getting stuck at 8%
any suggestions?
Sound like you have corrupted USB partition.
Go here. Happened to me. It worked!
http://forum.xda-developers.com/showthread.php?p=20989526
Will not pass the HP logo
I have a touchpad that is stuck on the logo and will not do anything except charge and deplete that charge. I was attempting to install CM10 on this pad, after being successful with numerous others it was just a normal walk in the park. I had just recently used the cm software on my personal pad and it works perfect. I did the install as normal, at the end the pad began to boot up and stayed in the logo screen. I have attempted to use the debrick and other methods of repair to no avail. I would like to fix this problem prior to the complete end of HP support in January 2015. Thanks so much for any and all assistance in my endeavor to fix this pad.
Rich
My screen has been shattered but still functional for months now, but the phone finally gave up on me. The phone currently does the following
I took the battery out and put back in. I try starting the phone and the at&t tune plays as usual, as well as the notification LED fading from light blue to dark blue over and over and the two touch keys light up but the screen never comes on or lights anything at all. Also, the blue notification LED continues to fade in and out and the touch keys stay lit up as if the phone is constantly trying to boot.
I plug it into my laptop but it does not appear in the device and drive folder. One thing I did discover is that when I open up Computer Management (Windows 8) and go to the Device Manager tab, and then the Portable Devices tab and it does appear as "samsung mobile mtp device". So I know the phone is making connection with the computer and vice versa but I need help trying to copy all the data to my laptop. Any help will be greatly appreciated.
In my case i attach Samsung to hdmi adapter to check - what messages are displayed on the screen if any. Also try to boot in recovery, if it present and make backup from there - not sure if hdmi signal will work in such case. Also you can re-flash firmware, that does not wipe user data - but still risky.
My Micro-USB was broken, so i solderd a new one at the board.
First it loads, but after the first day of use the Battery seems not to be charged (no flash-icon in the Battery).
So I disambled again, and resolder some of the USB-Pins. I've also removed the + pol of the Battery, and solderd it back to the board after finish my work.
Now if I plugin the AC, Tablet wake up, but only shows the "American Megatrends"-Bios Logo. Then tablet seems to freeze.
I still can shutdown the Tablet, If I press and Hold the PWR-Button for 10 Seconds, but If I restart the Tablet, same thing happend like described before.
Any Idea, what may the Problem?
Help is highly appreciated.
Can anybody give a hint?
May there a way to debug the Boot-Process in this early state (maybe with adb) ??
Display is ok... because it's freeze on Bios-Logo it may be an error of the Bios themself, or broken cable so that the bios get wrong hardware-information?!
Help guys, don't leave me hanging on this!
Hi everyone!
I was on call yesterday working from home (due to Covid-19 effects) when my P30 pro shut down and started doing boot loops. I tried the following remedies so far but to no avail:
1. Drain the battery and try recharging and open - it never goes to recharging screen the moment I plug it, it just goes straight to boot loop.
2. Press volume button up+power - never goes to EMUI screen.
3. Connect to PC via USB and press button down+up - It opens to fastboot&recovery screen but my HiSuite opens saying device is not supported for erecovery and not found.
4. Tried downloading all external apps i can find - Hardly find anything for Huawei and the rest that I do, requires USB debugging mode which I actually can't get into.
I'm currently trying ADB and stuff but it seems it doesn't even find my device. I also don't recall updating any systems (auto or manual) nor installed any new applications yesterday.
I hope someone out there can help me... If not, at least provide suggestions to get my files back... I have recent important files there that I haven't loaded into Cloud yet and it really pains me to realize I'm losing them...
Thanks in advance!
Regards,
Mark Sy