Hello to everybody.
*
I encounter the following problem with my TF701.
*
I have a USB key (actually a Garmin GPS) that is seen as 2 drives by Windows (F and G for example).
*
When I connect my GPS to a USB port of my TF701, only one of the two drives is visible (usually the second).
*
Have you encountered the same problem (and possibly found a solution) ?
*
Thank you for advance.
the same is true if you use a USB hub and insert several flash drives. Obviously, the keyboard's (or tablet's) firmware can handle only one drive at the USB port.
Gesendet von meinem K00C mit Tapatalk
Related
Hi!
I have a car with a USB port I use to plug a DOK with music play it.
I tried connecting the phone with the USB cable, but the car's radio shows me "error".
Of course I already checked the obvious setting: "check that the phone was as mass storage".
So I am guessing there is more to it like the way the car radio reads the information on external drives.
Has any one successfully contested their phone this way?
Thanks...
It has more to do with your car radio than with the SGSA.... check the radio manual to see what the requirements are for streaming through the USB. Some cars only take iphones ...
Surprisingly my car manual indicated that any mass storage class device will work, but then it also said capacity less than 4 GB, which is funny because my current usb device is with 8 GB and doesn't do any problems...
Sent from my GT-I9070 using Tapatalk 2
Are you using a jellybean rom???
Usb storage ids not working correctly in jb......
See this thread
http://forum.xda-developers.com/showthread.php?t=2187514
May be this is causing the problem. ..
I don't think it is connected to that because doing a Google search pointed out that people with GB also had this problem....
The problem on the thread you linked is concerning moving large files to the phone (a problem I don't have - I have copied 1 GB files with no problem)
Sent from my GT-I9070 using Tapatalk 2
Bump
Sent from my GT-I9070 using Tapatalk 2
Hey there.
I've been using a RPi as mediacenter connected to the internet over ethernet, but now I'd like to use an Samsung Galaxy Android phone running USB internet sharing for connecting.
I'm using RaspBMC in it's latest version; but I can't seem to find a way to connect to the internet using USB.
When connected via ethernet I have full control and can connect via SMB, SSH and FTP with no problem; but it seems that the RPi can't see the USB shared internet.
Have you tried the easy connect addon?
Gesendet von meinem HTC One mit Tapatalk 2
bjarnebk said:
Hey there.
I've been using a RPi as mediacenter connected to the internet over ethernet, but now I'd like to use an Samsung Galaxy Android phone running USB internet sharing for connecting.
I'm using RaspBMC in it's latest version; but I can't seem to find a way to connect to the internet using USB.
When connected via ethernet I have full control and can connect via SMB, SSH and FTP with no problem; but it seems that the RPi can't see the USB shared internet.
Click to expand...
Click to collapse
Question: why not just get a cheap, tiny wifi dongle and use the wifi hotspot on the phone to share the connection that way? Seems much easier...the dongle I use is this one:
Edimax EW-7811UN Wireless N 150Mbps USB Nano Adapter 802.11b/g/n abgn with EZmax
It's a plug-and-play item fully compatible with the Pi (meaning, you don't need to configure anything, it just works).
Jawler said:
Have you tried the easy connect addon ?
Click to expand...
Click to collapse
I wasn't aware of such a thing.. where is that located ?
Sendt fra min GT-I8190 med Tapatalk 4
adzidek said:
Question: why not just get a cheap, tiny wifi dongle and use the wifi hotspot on the phone to share the connection that way?
Click to expand...
Click to collapse
Because I already had the phone. But if this won't work I'll buy a wifi dongle and skip the phone. I just need to connect to the in-house network
Sendt fra min GT-I8190 med Tapatalk 4
I'm notsure if itsgoing towork. Butyoucan find it in the officialadd-onlist for xbmc.
Gesendet von meinem HTC One mit Tapatalk 2
wait, is there an app for this to help? or am i connecting thru the Pi?
I've exhausted all avenues to get my Nexus 6 to connect to Chevy MyLink head unit. My Nexus 5x connects with no issues.
Here are the things I've done:
* turned on MTP mode
* tried many cables including OEM
* rooted and non-rooted
* Pure Nexus and Dirty Unicorn ROMs
* Headunit reset
* AA app reinstall
* USB debugging on and off
* clean install without restoring apps
* MTP works with PC
Is this a hardware issue?
Sent from my Nexus 6 using Tapatalk
On my phone (not a nexus) nothing worked until I tried to turn on usb tethering while plugged. This made AA start. Maybe give it a try?
Envoyé de mon SM-G800F en utilisant Tapatalk
dden68 said:
On my phone (not a nexus) nothing worked until I tried to turn on usb tethering while plugged. This made AA start. Maybe give it a try?
Envoyé de mon SM-G800F en utilisant Tapatalk
Click to expand...
Click to collapse
@dden68, thanks for the suggestion. Gave it a try but didn't work. I'm reluctant to revert to stock because it's a pain and I give it little chance of working.
Does anyone have any other suggestions?
Sent from my Nexus 6 using Tapatalk
I have a Nexus 6 with a Honda Accord. I was having all kinds of issues connecting. I found that if I select PTP as my connection it works much better. The phone defaults to USB charging just click the notification and select PTP. I wish you could change the default as I have to do this every time I plug in.
Sent from my Nexus 6 using Tapatalk
Hi Guys,
I want to configure Smartconnect to switch on Hotspot when connected to my Car-BT. I found the action "switch on Howpot" but for trigger nothing to configure for one specific BT device that connects. So idea is to configure "If connected to BT device XY (one of the paired ones) shall trigger Hotspot on, if diconnected Hotspot Off again"
Am I missing here something? Anyone knows how this shall work?
Thanks Gescha
(Did also not find a solution by searching for Smart Connect here)
Found it. Special Bluetooth connection is listed while connected. Then it can be choosen. Solved.
Gesendet von meinem D5803 mit Tapatalk
Is there a setting or an app that will force USB to go charge only on the note 8? My use case is when I plug into my car I want it to charge only and not try to read my device. I have to hit several buttons on the car just to get the car to ignore my phone. Thanks
Developer options / USB configuration !
MTP should be pre selected. Just switch to charge only.
To enable developer options go to settings / about phone / software informations and tap 7 times the build number entry
Gesendet von meinem SM-N950F mit Tapatalk
Can't you just pull down notifications, click notification that says "USB for file transfer. Tap for other USB options." and select "Charge this phone"?
Edit: At least it says this when connected to PC, not sure about car though. Just do what Logel posted above.
Do as logel says
Logel said:
Developer options / USB configuration !
MTP should be pre selected. Just switch to charge only.
To enable developer options go to phone informations / software informations and tap 7 times the build number entry
Gesendet von meinem SM-N950F mit Tapatalk
Click to expand...
Click to collapse
to get developer mode look at this video https://www.youtube.com/watch?v=HxcaQ5S8XHs