Related
Hi
I updated my galaxy note last night to offical ics update for india now i can not connect my phone in usb mode it only showing charging i tried factory reset every option no result *#7284# code showing invalide mmi etc what to do so fedup
myankt2t said:
Hi
I updated my galaxy note last night to offical ics update for india now i can not connect my phone in usb mode it only showing charging i tried factory reset every option no result *#7284# code showing invalide mmi etc what to do so fedup
Click to expand...
Click to collapse
Download kies reinstall drivers
Sent from my GT-N7000 using xda app-developers app
wrong section should be in q&a
try forcing detection by going to settings, storage, mount usb. or likewise.
Kies troubleshooting is better.
Also make sure you have usb debugging off in development options
Sent from my GT-N7000 using Tapatalk 2
baz77 said:
wrong section should be in q&a
try forcing detection by going to settings, storage, mount usb. or likewise.
Kies troubleshooting is better.
Also make sure you have usb debugging off in development options
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Sorry if its in wrong section
I tried every option you mentioned no luck
My screen some time shows fluctuation too i bought this phone yesterday i previously used galaxy s
And random reboot and random discharging
ok try to instal gb rom, official, see dr ketans thread in sticky section development, and check if it works there
edit WAIT! read comment below
Known issue with 4.0.4 ICS http://forum.xda-developers.com/showthread.php?t=1828016
I haven't been able to resolve it by reinstalling kies. Before I could plug my note in and the phone card and external card would show up in my computer. Now only camera mode works. MTP no longer works.
I have to manually mount the usb storage to access ext sd card.
Try this
Setting -.security.-device administration - remove if any checked and try to connect.
Sent from my GT-N7000 using xda premium
dr.ketan said:
Try this
Setting -.security.-device administration - remove if any checked and try to connect.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
No luck bro.
thing i have done so far
Flashed stock rom via odin
re installed Kies
Re installed usb driver:crying:
factory reset
inurb said:
Known issue with 4.0.4 ICS http://forum.xda-developers.com/showthread.php?t=1828016
I haven't been able to resolve it by reinstalling kies. Before I could plug my note in and the phone card and external card would show up in my computer. Now only camera mode works. MTP no longer works.
I have to manually mount the usb storage to access ext sd card.
Click to expand...
Click to collapse
Manually mount how to do this ?
myankt2t said:
Manually mount how to do this ?
Click to expand...
Click to collapse
Go to settings > More > USB Utilities
If you can't do that then clean your micro usb port on your note.
inurb said:
Go to settings > More > USB Utilities
If you can't do that then clean your micro usb port on your note.
Click to expand...
Click to collapse
7cdcsis the error name tried samsung ADB mode still not working
my other android working on my system its galaxy pro :|
clean micro usb port from a brush or some thing ?
Please help me its been 3 days countless effort no result
dont wipe, (factory reset) on stock ics !
dont you want to root ?
are you using windows ?
rraaka said:
dont wipe, (factory reset) on stock ics !
dont you want to root ?
are you using windows ?
Click to expand...
Click to collapse
i didn't done hard rest it's not working :|
i m on window 7 :|
i also rooted tried custom rom still not working tried diff pcs and cables
If you are using windows7 just go to control panel then device manager look for those samsung drivers esp with yellow mark, right click then properties, look for update driver-then search automatically. Hope this will help
Sent from my GT-N7000 using xda app-developers app
Install Kies again ( latest ver) and uninstall leaving the drivers intact, re boot pc, try
LoVeRice said:
If you are using windows7 just go to control panel then device manager look for those samsung drivers esp with yellow mark, right click then properties, look for update driver-then search automatically. Hope this will help
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
It showing 7CDCS device and not updating
rraaka said:
Install Kies again ( latest ver) and uninstall leaving the drivers intact, re boot pc, try
Click to expand...
Click to collapse
i have done that no luck
myankt2t said:
7cdcsis the error name tried samsung ADB mode still not working
my other android working on my system its galaxy pro :|
clean micro usb port from a brush or some thing ?
Click to expand...
Click to collapse
compressed air or a qtip dipped in rubbing alcohol.
Dear Forum,
I have a I9001. I've been busy with it for a week now and read and tried allot. Nothing seems to work!
So , my I9001 doesn't have a recovery any more. No root or CWM. The rom works (2.3.5) but crashes or freezes. Then tried every
combo in the book to get into the recovery mode but nothing works.
So I ask you biggest android forum of the world: What the hell is going on??
Tried to get into recovery by recovery boot by pc, tried installing other roms or kernels or whatever.
Also getting a mmc boot mbr read failed when trying above stuff by odin.
Also when I shutdown the phone and I start it up again then it has to be installed again like country and date etc etc...
Thanks in forward for answering.
Greetz,
Happybeat
But download mode still working? Then you could try to flash the recovery via Odin again or a stock Rom, AFAIK those contain the stock recovery as well so afterwards you'll have a "fresh" installed phone... Might work, no other ideas...
M322 said:
But download mode still working? Then you could try to flash the recovery via Odin again or a stock Rom, AFAIK those contain the stock recovery as well so afterwards you'll have a "fresh" installed phone... Might work, no other ideas...
Click to expand...
Click to collapse
AFAIK? I don't know what that is sorry...And yes the download mode works fine.
happybeat said:
AFAIK? I don't know what that is sorry...And yes the download mode works fine.
Click to expand...
Click to collapse
I think that CW did an update and pushed it out to devices or something. I am having the same situation as you, I am unable to grab the device into CWR.
Dark_Savior said:
I think that CW did an update and pushed it out to devices or something. I am having the same situation as you, I am unable to grab the device into CWR.
Click to expand...
Click to collapse
It's insane haha im still trying stuff. Now when I reboot the phone I have to says what country etc etc...but when I try to connect to wifi it says TWLauncher chrashed...I still have connection with the phone by PC. Is there maybe anything what I can change or do?
happybeat said:
AFAIK? I don't know what that is sorry...And yes the download mode works fine.
Click to expand...
Click to collapse
AFAIK - As Far As I Know
happybeat said:
Is there maybe anything what I can change or do?
Click to expand...
Click to collapse
Well if your phone is in such a "bad condition" I would download my stock Rom from sammobile and flash it via Odin, then it should be "factory fresh". The only thing that is annoying is that you set up your phone again...
Sent from my GT-I9001 using xda app-developers app
ell if your phone is in such a "bad condition" I would download my stock Rom from sammobile and flash it via Odin, then it should be "factory fresh". The only thing that is annoying is that you set up your phone again...
Sent from my GT-I9001 using xda app-developers app[/QUOTE]
Ok ill check that out. I'll let you know.
Well I tried and nothing. It says that it passed and that odin did its thing but it didn't.
Is there a program that can do a clean install? Or cant I just clean it when I hook it up to a pc? Because I have access to the internal memory of the phone by pc.
happybeat said:
Well I tried and nothing. It says that it passed and that odin did its thing but it didn't.
Is there a program that can do a clean install? Or cant I just clean it when I hook it up to a pc? Because I have access to the internal memory of the phone by pc.
Click to expand...
Click to collapse
Well I think it should be a clean install and if I connect my phone in download mode to the pc I haven't access to the internal storage!
Did you do it like it is supposed in this tutorial? http://forum.xda-developers.com/showthread.php?t=1922505
By the way are you on a stock rom or not?
Yes, it's important to tell are you on stock or custom Rom
Mikroos said:
Yes, it's important to tell are you on stock or custom Rom
Click to expand...
Click to collapse
Sorry for my late answer!
stock I think. This is every info I have on the phone:
About phone:
Firmware: 2.3.5
baseband: i9001xxkpf
kernel: 2.6.35.7-perf [email protected] #1
build: gingerbread.xxkpg
when I do *#1234#:
pda: i9001xxkpg
phone: i9001xxkpf
csc: i9001xenkp1
That's it...
Ok...this is strange...I just connected it to my pc and have access to it...but when I deleted something what was in download it says delete permant I say yes...when I restart it and connect it back to the pc and go to download its back??
Sorry don't know any solution but I'm quite new in here so maybe you can post it into/revive this thread because the Q&A is (in my opinion) not well visited by I9001 users because it's meant to be for i9000.
http://forum.xda-developers.com/showthread.php?t=1826216
Sent from my GT-I9001 using xda app-developers app
happybeat said:
Ok...this is strange...I just connected it to my pc and have access to it...but when I deleted something what was in download it says delete permant I say yes...when I restart it and connect it back to the pc and go to download its back??
Click to expand...
Click to collapse
Try a reset and if that is not working try a restock.
fotbal5 said:
Try a reset and if that is not working try a restock.
Click to expand...
Click to collapse
Thats the problem. There is no way of getting into recovery mode. I can get into download mode but not into recovery mode. It's like it is vanished.
And I dont know if someone from the mods could put this into the 9100 section? I thought I had to put questions here since there isn't a Q/A for 9001...
happybeat said:
Thats the problem.
Click to expand...
Click to collapse
You can do a factory reset over the dialer on a stock Rom by entering a certain code, you can look it up in the xda wiki about the I9001
Sent from my GT-I9001 using xda app-developers app
M322 said:
You can do a factory reset over the dialer on a stock Rom by entering a certain code, you can look it up in the xda wiki about the I9001
Sent from my GT-I9001 using xda app-developers app
Click to expand...
Click to collapse
Yep did that. Doesnt work. The thing is also that I cant change anything. Everytime when I reboot I need to install again. So it doesnt remember. Same when I connect it to the pc and I remove a file from download that I do not need it doesn't remove the file because the next time I reboot its back. It's like the internal is locked?
I can't find a good page with an explanation, so I'll just type it out myself. If anything isn't clear, ask!
You can try getting into recovery mode using the Android SDK, maybe that could work...
Install the latest version of Samsung Kies if you haven't already (for the USB driver)
Install the Android SDK (http://developer.android.com/sdk/index.html) You'll need just the SDK, everything else is useless for this
Open a command prompt and go to the directory where you have installed the Android SDK (basically you'll run the command cd "<folder>", where folder is something like "C:\Program Files (x86)\Android\android-sdk")
Start your phone and go to Settings > Applications > Development
Enable USB debugging (if it's not there, just find that option and enable it )
Connect your phone using a USB cable
Go back to your command prompt and run the command tools\adb reboot recovery
Hopefully your phone will boot in recovery mode
Good luck!
Marshian said:
I can't find a good page with an explanation, so I'll just type it out myself. If anything isn't clear, ask!
You can try getting into recovery mode using the Android SDK, maybe that could work...
Install the latest version of Samsung Kies if you haven't already (for the USB driver)
Install the Android SDK (http://developer.android.com/sdk/index.html) You'll need just the SDK, everything else is useless for this
Open a command prompt and go to the directory where you have installed the Android SDK (basically you'll run the command cd "<folder>", where folder is something like "C:\Program Files (x86)\Android\android-sdk")
Start your phone and go to Settings > Applications > Development
Enable USB debugging (if it's not there, just find that option and enable it )
Connect your phone using a USB cable
Go back to your command prompt and run the command tools\adb reboot recovery
Hopefully your phone will boot in recovery mode
Good luck!
Click to expand...
Click to collapse
Ok so thank you for this but unfortunatly it just didnt work. I think it is dead. Does Jtagg do any difference? Like hook it up to that machine?
So what it does at this moment:
It starts up but everytime you start up it will ask you to install everything again. So it asks what country etc.etc...
When I am in it appears to work but starting apps just makes it all crash or freeze.
Im a bit lost at the moment to do anything. It just looks that it doesnt memorize.
I can hook it up to the pc but you cant remove or add anything. You can just look and scroll through it.
Hello everyone,
I am new here... so please bear my mistakes....
I bought a Samsung galaxy ace GT-S5830 a year back..
And later i decided to try some custom roms..
I have CWM Recovery installed
I have rooted the device....
then i installed the S'Periance rom...
Now i want to sell my mobile so i want to get back to the stock rom....
I need help on how to get back to the stock rom (please give detailed Instruction
P.S :- When i connect the mobile to the computer the ODIN does not recognize it...
Any help is highly appreciated!!!
With regards,
Nik
Are you putting the phone in download mode? Hold volume down and home, then turn the phone on, then connect by USB. Odin should detect the phone now.
Sent from my Galaxy Ace
Click Thanks if I helped you.
nikhit5 said:
Hello everyone,
I am new here... so please bear my mistakes....
I bought a Samsung galaxy ace GT-S5830 a year back..
And later i decided to try some custom roms..
I have CWM Recovery installed
I have rooted the device....
then i installed the S'Periance rom...
Now i want to sell my mobile so i want to get back to the stock rom....
I need help on how to get back to the stock rom (please give detailed Instruction
P.S :- When i connect the mobile to the computer the ODIN does not recognize it...
Any help is highly appreciated!!!
With regards,
Nik
Click to expand...
Click to collapse
Check out my blog www.andro-sapien.blogspot.inHERE for a detailed procedure. Search for the thread OFFICIAL GALAXY ACE FIRMWARE. All the steps with screenshots are provided.
Sent from my GT-S5830 using xda app-developers app
Still not working
sauron82 said:
Are you putting the phone in download mode? Hold volume down and home, then turn the phone on, then connect by USB. Odin should detect the phone now.
Sent from my Galaxy Ace
Click Thanks if I helped you.
Click to expand...
Click to collapse
Yeah i even tried that but its of no use...
The odin won't recognize even if its in download mode!!!
OK
I will check it and will give you a response...
nikhit5 said:
Yeah i even tried that but its of no use...
The odin won't recognize even if its in download mode!!!
Click to expand...
Click to collapse
Did you install Samsung USB drivers?
nikhit5 said:
Yeah i even tried that but its of no use...
The odin won't recognize even if its in download mode!!!
Click to expand...
Click to collapse
Install Samsung Lies so your computer recognizes your phone, then never use it for anything. Then put the phone in download mode and try Odin again.
Sent from my Galaxy Ace
Click Thanks if I helped you.
sauron82 said:
Install Samsung Lies so your computer recognizes your phone, then never use it for anything. Then put the phone in download mode and try Odin again.
Sent from my Galaxy Ace
Click Thanks if I helped you.
Click to expand...
Click to collapse
he means samsung kies
NO USE!!!!
Buddhism said:
Did you install Samsung USB drivers?
Click to expand...
Click to collapse
I have all types of Samsung USB drivers installed!!!!!
NO USE!!!!
Buddhism said:
Did you install Samsung USB drivers?
Click to expand...
Click to collapse
Yeah i had installed it!!!
But still no detection from ODIN!!!!
NIL
sauron82 said:
Install Samsung Lies so your computer recognizes your phone, then never use it for anything. Then put the phone in download mode and try Odin again.
Sent from my Galaxy Ace
Click Thanks if I helped you.
Click to expand...
Click to collapse
I have installed everything... still my PC won't recognize my device!!!!
I even RE-INSTALLED WINDOWS SP (SP3)
nikhit5 said:
I have installed everything... still my PC won't recognize my device!!!!
I even RE-INSTALLED WINDOWS SP (SP3)
Click to expand...
Click to collapse
There is some problem with ur pc only I see as Odin will recognise ur device be it on any ROM. Now what may be the problem with your Pc.
1. Administrator rights not granted to odin.
2. Drivers not properly installed.
3. Windows USB drivers not installed properly.
4. USB drive not working (least possible)
Try running Odin AS ADMIN. Maybe it works.
Sent from my GT-S5830 using xda app-developers app
nikhit5 said:
Yeah i had installed it!!!
But still no detection from ODIN!!!!
Click to expand...
Click to collapse
Are you using a Samsung cable to connect your phone?
will try it
omega_warrior said:
There is some problem with ur pc only I see as Odin will recognise ur device be it on any ROM. Now what may be the problem with your Pc.
1. Administrator rights not granted to odin.
2. Drivers not properly installed.
3. Windows USB drivers not installed properly.
4. USB drive not working (least possible)
Try running Odin AS ADMIN. Maybe it works.
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
i
I will check it.....
Btw this Saturday I will make a video of my problem....
I think that might help you guys to understand my problem....
nikhit5 said:
i
I will check it.....
Btw this Saturday I will make a video of my problem....
I think that might help you guys to understand my problem....
Click to expand...
Click to collapse
hello, if the computer doesnt recognize the phone the problem seems to be in the drivers. Uninstall kies and drivers (control panel> programs), then download kies again, reboot computer and try to connect the phone. [if you have a custom rom is natural kies dont recognize it].
When appears the information of USB connection, switch the storage and see if it lets computer access the SD.
If this works, you can use ODIN, if not try this
If nothing works and you have access to another computer try to install the kies there and do everything there to see if work.
WRONG SECTION!!
WE HAVE A GREAT Q&A THREAD!!
Next time ask for help in q&a thread!
OK
qashqool said:
hello, if the computer doesnt recognize the phone the problem seems to be in the drivers. Uninstall kies and drivers (control panel> programs), then download kies again, reboot computer and try to connect the phone. [if you have a custom rom is natural kies dont recognize it].
When appears the information of USB connection, switch the storage and see if it lets computer access the SD.
If this works, you can use ODIN, if not try this
If nothing works and you have access to another computer try to install the kies there and do everything there to see if work.
Click to expand...
Click to collapse
I will follow your instructions...
And will inform the progress....
With regards,
Nik
nikhit5 said:
I will follow your instructions...
And will inform the progress....
With regards,
Nik
Click to expand...
Click to collapse
Hey, what happen when you go to download mode??
If nothing is showing, then it might be the invisible download mode(thats what they say ).
Send from Batman's Bat- Phone
Sorry dude. wrong section!
I thought this was ace-i .
Send from Batman's Bat- Phone
Hi, I have many S5830 phonesbut now on one from that I have problem, whan I put cable in pc is not on phone icon USB and pc tell me problem with conect... Other phones not have problem with conect so can You help me? Can I flash stock firmware by stock CWM (how) and delete this error from phone? I have wiped factory reset but always same problem.
MY PHONE WRITE IN THE LEFT DOWN ON DISPLAY : SAVE MODE....??? What is it?
Thanks so much
Can I flash Stock Firmware via Stock CWM : download md5 file with Stock Rom for and flash by Apply Update From SDcard???
Thanks
Paul Koty said:
Can I flash Stock Firmware via Stock CWM : download md5 file with Stock Rom for and flash by Apply Update From SDcard???
Thanks
Click to expand...
Click to collapse
NEVER!! you can try flashing a custom rom, maybe It's your own rom bug
Which rom are you using?
Enable USB debug in settings and reinstall samsung drivers in your pc or try changing the USB port then boot in download mode to flash a fresh stock via Odin
ummm you can try mobile odin, several members posted that works fine
Viper The Ripper said:
Never
Click to expand...
Click to collapse
Thanks, so now I am in ...
Becazuse I have rooted, flashed custom cwm and Custom Rom. Not change... Always I can´t connect with pc. ..
You have any idea what happend?
Always if I put cable to phone, normal can charging battery, but not connecting
Paul Koty said:
Thanks, so now I am in ...
Becazuse I have rooted, flashed custom cwm and Custom Rom. Not change... Always I can´t connect with pc. ..
You have any idea what happend?
Always if I put cable to phone, normal can charging battery, but not connecting
Click to expand...
Click to collapse
Try enabling USB debug in settings, reinstall drivers in your pc check they work and that the pins of your cable are working properly, Is posible to try with a friend's cable?
Here it is modded mobile odin just in case you can't conect your phone to your pc
http://forum.xda-developers.com/showthread.php?t=2029180
Viper The Ripper said:
Try enabling USB debug in settings, reinstall drivers in your pc check they work and that the pins of your cable are working properly, Is posible to try with a friend's cable?
Click to expand...
Click to collapse
Usb debug Enable. Drivers for other phones s5830 (I have 3pcs) are good, cable used 3 other pcs...
EDIT:
DONE! Was USB conector little bit curved.. Knife is my friend now
Paul Koty said:
Usb debug Enable. Drivers for other phones s5830 (I have 3pcs) are good, cable used 3 other pcs...
Click to expand...
Click to collapse
You don't need the other phone's drivers YOU NEED THE SPECIFIC GALAXY ACE DRIVERS!!
Viper The Ripper said:
You don't need the other phone's drivers YOU NEED THE SPECIFIC GALAXY ACE DRIVERS!!
Click to expand...
Click to collapse
Oh man, I don´t know all but I am not idiot too much. I have many GALAXY ACE´s S5830 phones man.
Paul Koty said:
Oh man, I don´t know all but I am not idiot too much. I have many GALAXY ACE´s S5830 phones man.
Click to expand...
Click to collapse
I didn't say that but you could write better to avoid confusions that's all, I try to help you but I need to understand exactly what you mean so...
Well I'm glad you found the solution
Viper The Ripper said:
I didn't say that but you could write better to avoid confusions that's all, I try to help you but I need to understand exactly what you mean so...
Well I'm glad you found the solution
Click to expand...
Click to collapse
No problem man :good: You are one from who want to always help me. Thanks :good:
Hello.I am in some kind of a trouble..I just bought a phone with firmware problems,hoping i could make it work.The problem is this,someone tried to update the firmware,unsuccesfully,and now it's stuck with no OS.I can only start recovery and bootloader.
Recovery is Teamwin 2.6.3.3.Already tried to clear cache and everything,to use an USB with OTG,but it's not recognised,ADB sideload also it's not working.
adb devices shows the phone is not connected,and FastBoot says "Waiting for device".Any idea? I've tried,read a lot,but I can't really work it out..
Also,I can't find the device in Device Manager,neither in ADB nor Fastboot.
I tried using Windows 8.1 and 7..Same deal.
Thank you!
chris_b0ss said:
Hello.I am in some kind of a trouble..I just bought a phone with firmware problems,hoping i could make it work.The problem is this,someone tried to update the firmware,unsuccesfully,and now it's stuck with no OS.I can only start recovery and bootloader.
Recovery is Teamwin 2.6.3.3.Already tried to clear cache and everything,to use an USB with OTG,but it's not recognised,ADB sideload also it's not working.
adb devices shows the phone is not connected,and FastBoot says "Waiting for device".Any idea? I've tried,read a lot,but I can't really work it out..
I tried using Windows 8.1 and 7..Same deal.
Thank you!
Click to expand...
Click to collapse
Is it a M8 or a M7, because your title says M8 but you have posted in the M7 forum.
Sorry,I am quite scared.It's M7.
chris_b0ss said:
Sorry,I am quite scared.It's M7.
Click to expand...
Click to collapse
First, follow instructions given in this post to install the latest android sdk-tools and the latest htc drivers. Also make sure you don't have HTC Sync installed on your computer.
Then connect your phone to you computer with the original cable (or any other cable already known to work for data transfer - some usb cable are only providing power), reboot the phone in bootloader mode by holding vol down and power. Make sure you see the red "fastboot usb" caption on the screen, if not use vol up/down and power to select the "fastboot" menu. Once there open a command window form the android sdk-tools folder and type "fastboot getvar all". Copy/paste the ouput of this command here (except the imei and serialno).
I've followed that,and still not working.pics attached.
It's very weird,because I was expecting for a soundfrom the Windows,like a new device connected .But ..nothing
Sent from my GT-I9100 using XDA Free mobile app
chris_b0ss said:
I've followed that,and still not working.pics attached.
It's very weird,because I was expecting for a soundfrom the Windows,like a new device connected .But ..nothing
Sent from my GT-I9100 using XDA Free mobile app
Click to expand...
Click to collapse
With your phone in bootloader/fastboot mode, go to your windows device manager, take a screenshot of your device manager and post it here please.
The unknown device is related to my laptop.Nothing happens when I connect the phone.
chris_b0ss said:
The unknown device is related to my laptop.Nothing happens when I connect the phone.
Click to expand...
Click to collapse
Ok so its not detected at all
Might be caused by
a bad usb cable --> Try another one that you are 100% sure its working
a bad usb port on the computer (use only usb 2.0 ports btw)
a problem with the computer ---> Try another computer.
a bad usb port on the phone ---> need to replace the usb/front mic board
Might also worth to fix your laptop drivers problem. Might be causing problem if the "unknown" device is an adapter or usb controller...
Then reboot the computer.
I think we can exclude the first two,because I've tried 2 different USB cables,and with my S2 ,both of them are working,even ADB.I will try to replace the usb port from the phone,and then try again.But,do you think it will work ?
Thank you!
chris_b0ss said:
I think we can exclude the first two,because I've tried 2 different USB cables,and with my S2 ,both of them are working,even ADB.I will try to replace the usb port from the phone,and then try again.But,do you think it will work ?
Thank you!
Click to expand...
Click to collapse
Its hard to tell, there isn't any background info about what was done on that phone. The usb board is pretty cheap so it worth a try if you are 100% sure everything else is fine (computer, cables etc..)
I understand,but,I mean,as far as I know,it's not hard brick,because the phone is still booting..in some way ..so if I manage to connect it,I can flash the rom..am I right?
Sent from my GT-I9100 using XDA Free mobile app
chris_b0ss said:
I understand,but,I mean,as far as I know,it's not hard brick,because the phone is still booting..in some way ..so if I manage to connect it,I can flash the rom..am I right?
Sent from my GT-I9100 using XDA Free mobile app
Click to expand...
Click to collapse
Normally it should be pretty easy to fix if you can get fastboot and adb connectivity. You could then update the firmware so you can flash the correct RUU to restore the phone back to stock, already made the research and all the files (firmware and ruu) you'll need are available.
alray said:
Normally it should be pretty easy to fix if you can get fastboot and adb connectivity. You could then update the firmware so you can flash the correct RUU to restore the phone back to stock, already made the research and all the files (firmware and ruu) you'll need are available.
Click to expand...
Click to collapse
Sorry for the late reply,the phone is now in service,in 1-2 days they should fix the USB board,and I will get back with more info soon.
Thank you very much for your quick answers and for taking time to help me!
Good news,I've managed to unbrick it.I asked a friend with a Mac to check it out,and his Mac recognized with no problems.Installed the Os,but still,Windows can't detect it.I've tried on 2 pc's(7 and 10) with the proper drivers.Weird..
Anyway,thank you for your time @alray !