Custom ROM: FXP312
I have zero percent battery.
when i plug in the charger, red led shows up for 5 minutes.
afterwards, the phone boots up comes to home screen and shuts down because of low battery(0%).
this keeps on repeating.
how to fix this?
cant connect to flash tool.
black_dagger said:
Custom ROM: FXP312
I have zero percent battery.
when i plug in the charger, red led shows up for 5 minutes.
afterwards, the phone boots up comes to home screen and shuts down because of low battery(0%).
this keeps on repeating.
how to fix this?
cant connect to flash tool.
Click to expand...
Click to collapse
This happens with me to, and I asked this here and the people have helped me.. Search just a few pages before this thread and you will see my thread. Sorry for my english.
sejis99 said:
This happens with me to, and I asked this here and the people have helped me.. Search just a few pages before this thread and you will see my thread. Sorry for my english.
Click to expand...
Click to collapse
so which method worked for you?
thanks
Yes that lack of off line charging for some custom ROMS almost made me send my phone in to repair. This was made worse by the fact that the build of CM I was on didn't allow you to boot into recovery (you could only reboot into recovery)
What I did.
Take the back cover of and have a pen ready so that you can use the hard power off function.
Prep your computer with flashtool open, drivers installed etc. – so that you can flash doom kernel as quickly as possible (you may only have 20 or so seconds).
1. Charge your dead phone, but AS SOON as begins to power up use your pen to power it down until it vibrates three times,
2. At this point you’ll hopefully have enough charge to enter fastboot mode, if not repeat stage 1. you may have to repeat stage 1. three or four times. If yes, flash doom kernel – do it quickly.
3. Go back to stage 1. But instead of powering off, see if you can boot in to CWM recovery, because the SP can be charged in CWM – if you can get into CWM all is good.
thanks both of you !
now im able to get into cwm but theres no led light indicating its charging.
hope its charging.
ill update you in 20 minutes
If you can get into CWM see if you can flash the offline charging fix appropriate to the ROM you're using (just to be sure).
so i got my battery up again!
but i have another question now.
after i installed doomlord kernel i had to reinstall fxp323.
else it was bootlooping.
now the doomlord kernel is gone.
how do i keep both?
Doom lords kernel is only for stock ROMs, I don't think cm kernels allow you to charge in cwm which is why I recommended it. Just flash the offline charging fix and you'll never have this problem again.
Sent from my C5303 using XDA Premium 4 mobile app
Related
I was trying to flash Clockwork Recoverylast night, but the links were down the files I needed. So I went to Modaco's site and there is a conversion file to EXT 4 which included Clockwork Recovery. I flashed it using Odin with no problems, and I even saw the Orange recovery screen prior to the phone rebooting. So it looked as if everything worked fine. At this point, it was 4 AM so after the flash it said to be patient and it would take a long time. So I just went to sleep. I woke up this morning to a dead Tab. I figured I would plug it in because maybe the battery ran out.
Plugging it in had no signs of life, so I left it on the charger for a while and eventually I saw the battery and the circular lines that rotate when the battery is charging. The lines however, were not rotating. Basically a "frozen" charge screen. I thought I would leave it on just in case if it was charging and no charge what so ever.
I cannot get into download mode, or recovery. I have also tried plugging in the device and Odin does not recognize it. Can anyone help? thanks
I followed these instructions:
http://droid-den.com/phone-guides/p...co-rom-and-kernel-on-samsung-galaxy-tab-guide
before posting looked through these tips with no success:
http://forum.xda-developers.com/showthread.php?t=888318&page=2
http://forum.xda-developers.com/showthread.php?t=885919
Please post in the proper forum.
I don't see how this has to do with development.
sorry, I figured since I was using the dev thread for info it would go here. Post to general? can a mod move to appropriate portion please? thanks
First post it in general forum.
Second, its not dead, just press volume down and hold power and it will boot into download mode and you can flash it with anything you want.
Thanks Tech, but it will not go into download mode (the sweeping android). It seems as if the battery died, and it is not taking a charge. I have tried holding the V down and power at the same time. Pressing V Down and holding power and all other combos. Cannot get it into DL mode.
Plug in the tab to an outlet and IMMEDIATELY push and hold the power button. My point is, don't let the tab display that battery with the stuck cursor. You want it to boot before that battery icon comes up. You might be using an older version of the kernel that doesn't have the fix for charging when its off.
From the Tab.
www.twitter.com/ayman07
solution
This happened to me. Just plug it in your PC, it will look like nothing is happening, but wait half an hour or more and all of a sudden your pc is going to recognize the usb connects. When this happens right away go to the download mode. Then you can flash whatever you want and fix your tab.
I hope that works for you.
PHEW! Thanks guys! Any idea what I may be doing wrong? I will retry flashing using Odin. I am using pit P1_20100909.pit
try power botton and volume up
xcobrax81 said:
PHEW! Thanks guys! Any idea what I may be doing wrong? I will retry flashing using Odin. I am using pit P1_20100909.pit
Click to expand...
Click to collapse
I think your problem is with the kernel. So thats what you need to flash. you can flash a whole rom that has a kernel. for future reference your battery should be at least 50% before flashing 100% is even safer..
xcobrax81 said:
PHEW! Thanks guys! Any idea what I may be doing wrong? I will retry flashing using Odin. I am using pit P1_20100909.pit
Click to expand...
Click to collapse
When I flashed the modaco kernel I did not use a PIT file. USA ATT tab. It didnt work the first time, and once i flashed it again it worked.
antiochasylum said:
When I flashed the modaco kernel I did not use a PIT file. USA ATT tab. It didnt work the first time, and once i flashed it again it worked.
Click to expand...
Click to collapse
That is what I did for my second turn and it worked like a charm. Thanks for the suggestions. I wanted to try out the CM7 Beta, but I know that Modaco is ext-4 and I think that conflicts with CM7, so I will worry about that some other time. I am done for the year
Again, thank you all for your help and suggestions.
xcobrax81 said:
That is what I did for my second turn and it worked like a charm. Thanks for the suggestions. I wanted to try out the CM7 Beta, but I know that Modaco is ext-4 and I think that conflicts with CM7, so I will worry about that some other time. I am done for the year
Again, thank you all for your help and suggestions.
Click to expand...
Click to collapse
Even a simple process of flashing custom kernel cause such trouble to you, I recommend you to wait till cm7 is stable, in the mean time, just flash other custom rom that use cwm..
So here is the situation.
I want to get back to stock by repairing via SEUS, also to preparing for 4.3 update.
So i Relock bootloader and repair it via SEUS. But my phone only have 16% battery. I still turn it off and plug in SEUS. After more than 1 hours of downloading Firmware, it started to flash.
After starting for a bit, it shows an error and tell me that flashing failed. try charging the phone to 100% and then try again.
So I try connecting the phone to the charger. The LED shows red, but after like 1 minute, it turn to green and then the screen shows SONY. A few seconds later the phone turned off and LED shows red again. It just keep doing these proccesses again and again.
I try pulling the battery out and repair via SEUS but same error shows up.
Try to flash via Flashtool,show error 31: I dont remember, ill add this info later.
What should I do now ( I saved so long to be able to afford this phone!
Charge the battery 100 % full, which means 12 h our longer. Not that it's my idea, it has been said numerous times.
I learned never doing anything on the phone with less than 20 % charge, not even removing or adding an .apk or clearing dalvic, flashing a ROM no less than 80 %.
peter-k said:
Charge the battery 100 % full, which means 12 h our longer. Not that it's my idea, it has been said numerous times.
I learned never doing anything on the phone with less than 20 % charge, not even removing or adding an .apk or clearing dalvic, flashing a ROM no less than 80 %.
Click to expand...
Click to collapse
thanks. I can flash it by flashtool now.
LESSON LEARNED:
NEVER FLASH WITH BATTERY LOWER THAN 30%
Please Help - Xperia V won't boot up, even in flashmode
I am having the same issues as well, but with my Xperia V. It doesn't come up at all. It only shows the green LED when I try to fastboot or flash mode. Please help me to resolve. I can't stand the wait for waranty to resolve. How can I still flash custom ROM?
samokel said:
I am having the same issues as well, but with my Xperia V. It doesn't come up at all. It only shows the green LED when I try to fastboot or flash mode. Please help me to resolve. I can't stand the wait for waranty to resolve. How can I still flash custom ROM?
Click to expand...
Click to collapse
You should have blue led instead of green led when u use fastboot
Aria.A97 said:
You should have blue led instead of green led when u use fastboot
Click to expand...
Click to collapse
Yes. I learnt that. It shows the blue led when I press and hold the volume up button. I don't seem to see any signs that it is in fastboot mode. I can't even root it. Though i've been able to flash stock ROM.
cnkhanh said:
thanks. I can flash it by flashtool now.
LESSON LEARNED:
NEVER FLASH WITH BATTERY LOWER THAN 30%
Click to expand...
Click to collapse
How do you solved that problem?
I have a question, I have jb 4.3 locked bootloader flash can do with jb 4.0
thx xperia v
charge phone for 12 hours,
start flashtool with latest .tft sony firmware/bucked up firmware.
when asked to connect phone connect phone with volume down button.
flashing should commence and after its done start up phone and boom you should be good to go.
Hello.
Short problem review. My brother used some custom rom for a while. Today he tried to install CM12,1 . He installed it by Cwm recovery. Everythink looks fine. After first start it was imposible even to unlock phone (all the time some programs stoped working...). After hard reset phone not turn on at all. It shows just SONY logo then 4seconds black screen and phone auto restart. And it never end. Is it posible that he break this phone? P.S. just one option works - fastboot mode (blue led). Sorry for poor english.
Maybe someone can give me some hints or tips what to do?
Frozen258 said:
Hello.
Short problem review. My brother used some custom rom for a while. Today he tried to install CM12,1 . He installed it by Cwm recovery. Everythink looks fine. After first start it was imposible even to unlock phone (all the time some programs stoped working...). After hard reset phone not turn on at all. It shows just SONY logo then 4seconds black screen and phone auto restart. And it never end. Is it posible that he break this phone? P.S. just one option works - fastboot mode (blue led). Sorry for poor english.
Maybe someone can give me some hints or tips what to do?
Click to expand...
Click to collapse
1. You can flash boot.img of any rom for yuga (i prefer boot.img of slimlp) through fastboot mod and after that go to recovery and install any rom.
2. You can flash stock if nothing work through flashmod.
Ess Arr said:
1. You can flash boot.img of any rom for yuga (i prefer boot.img of slimlp) through fastboot mod and after that go to recovery and install any rom.
2. You can flash stock if nothing work through flashmod.
Click to expand...
Click to collapse
i tryied to flash boot.img from this http://forum.xda-developers.com/xperia-z/orig-development/rom-slimlp-yuga-t3004439 but nothing changed
Frozen258 said:
i tryied to flash boot.img from this http://forum.xda-developers.com/xperia-z/orig-development/rom-slimlp-yuga-t3004439 but nothing changed
Click to expand...
Click to collapse
Flash boot.img again as "kernel" not as system through flashtool and restart the phone. When sony logo appears press vol up or down constantly.
Try to reprogram ?
Androidzkie said:
Try to reprogram
Click to expand...
Click to collapse
can you tell me more about this? P.S. when i connect to the charger it restarting all the time and not charging
Ess Arr said:
Flash boot.img again as "kernel" not as system through flashtool and restart the phone. When sony logo appears press vol up or down constantly.
Click to expand...
Click to collapse
after restart i see sony logo and red led on corner and mili second green led (on this it should open recovery mode, but phone restart faster and i can't get on it)
could it be battery problem (dead battery)? the reason for flashing new rom was that this phone shutdown at 82% of batery remaining. Factory settings reset didn't helped so we installed other custom rom and now it is dead. Now without charger it dont start at all ( 3 times red led and thats all). If i leave it to charge but it restart and restart.
Frozen258 said:
could it be battery problem (dead battery)? the reason for flashing new rom was that this phone shutdown at 82% of batery remaining. Factory settings reset didn't helped so we installed other custom rom and now it is dead. Now without charger it dont start at all ( 3 times red led and thats all). If i leave it to charge but it restart and restart.
Click to expand...
Click to collapse
Yep bro i seems to be like a hardware issue. Other wise try to flash the stock rom.
---------- Post added at 04:47 PM ---------- Previous post was at 04:41 PM ----------
Frozen258 said:
could it be battery problem (dead battery)? the reason for flashing new rom was that this phone shutdown at 82% of batery remaining. Factory settings reset didn't helped so we installed other custom rom and now it is dead. Now without charger it dont start at all ( 3 times red led and thats all). If i leave it to charge but it restart and restart.
Click to expand...
Click to collapse
Yep bro i seems to be like a hardware issue. Other wise try to flash the stock rom.
thank you guys for help. Problem was battery. But i have another now... while i was changing battery i crashed my xperia screen :/ . Is it worth to buy new one or phone is too old to repair it? Touch now works only on down corner but LCD looks fine.
It's not my first time to flashing roms. But this time i think phone dead. Here is the story: I installed cm12 and wipe system flash cm 14 adn finally today i flashed cm13 and i loved it. But when i opened file explorer i see internal storage is 2gb(before flashing it is 10gb). When i opened TWRP 3.0.2 i see another legacy sd partition. I think if i will format this partition i can get 10gb internal storage back. And i formatted legacy sd using twrp. But when i push reboot system now phone turned off and never go back. no any red or green light. I'm sure phone have min 50% charge and battery new(not battery problem). I tried remove battery but it is not work. When connect it to pc see this on bottom right corner ''QHSUSB_DLOAD'' and no driver found and no any light on phone. What can i do now? Flash tool and Emma dont recognize device.
Elshan_Nurmammadov said:
It's not my first time to flashing roms. But this time i think phone dead. Here is the story: I installed cm12 and wipe system flash cm 14 adn finally today i flashed cm13 and i loved it. But when i opened file explorer i see internal storage is 2gb(before flashing it is 10gb). When i opened TWRP 3.0.2 i see another legacy sd partition. I think if i will format this partition i can get 10gb internal storage back. And i formatted legacy sd using twrp. But when i push reboot system now phone turned off and never go back. no any red or green light. I'm sure phone have min 50% charge and battery new(not battery problem). I tried remove battery but it is not work. When connect it to pc see this on bottom right corner ''QHSUSB_DLOAD'' and no driver found and no any light on phone. What can i do now? Flash tool and Emma dont recognize device.
Click to expand...
Click to collapse
Hi! i have de same problem right know... i format de lagacy sd and now is bricked like your phone.
Did you solve IT?
Hi. Generally when the phone doesn't respond, you had to consider it hard bricked, and there's no solution that you can apply without putting the hands on the Hardware. My advice is to try let it charging for 24+ hours and see if something happens. For example if the led turns on, probably you are in soft brick and you can bring it back to life. There's a tread here in XDA explaining the importance of charging cycles for the late 2012 Sony devices.
In my case I couldn't flash nothing on xperia T until I haven't let it charging for 25 hours straight. Then I was able to bring it back to life.
Hope you can do the same. In any case, good luck.
I might be reckoning wrong, but I believe I've recovered my T several times using stock firmware in such case.. Then go again with CM or whatever.
landerxxx said:
Hi! i have de same problem right know... i format de lagacy sd and now is bricked like your phone.
Did you solve IT?
Click to expand...
Click to collapse
MaliSimo said:
Hi. Generally when the phone doesn't respond, you had to consider it hard bricked, and there's no solution that you can apply without putting the hands on the Hardware. My advice is to tryif something happens. For example if the led turns on, probably you are in soft brick and you can bring it back to life. There's a tread here in XDA explaining the importance of charging cycles for the late 2012 Sony devices.
In my case I couldn't flash nothing on xperia T until I haven't let it charging for 25 hours straight. Then I was able to bring it back to life.
Hope you can do the same. In any case, good luck.
Click to expand...
Click to collapse
after+ 12hr of charging i see blinked red every 2 mint .... what can ido for this ??plz help sorry for bad english
Sorry for the late reply. Its a good sign, so now you know your phone its not hard bricked. There's hope!!! Let it charge for other 12+ hours and you should see the blinking red led becoming continuous. Then you could try flashing a kernel and a custom recovery, if it works you can try flashing a ROM. Alternatively you can try to flash a stock ROM via flashtool.
Anyway now you know the phone it's alive, keep trying and you will able to bring it back to life.
Many thanks for you pro.... but usb not recognized or appear like "Qualcomm driver ..any advice ....any way I could leave it in charger and try again....Thanks for ur reply...
Maybe you can try, if you didn't already, to install the latest Sony flashtool, browse the installation folder, search for drivers and use the installation tool to reinstall the blue board 3 drivers (if you are using win 10 you may need to disable the driver signature to install the drivers properly).
I got the same problem with my Xpetia T, here I will report the steps I followed:
1. The phone didn't respond to any command, even to hard reset (pressing power button and volume + for 10s until you don't feel 3 vibrations, not recommended to do that, but I was a little frustrated).
2. I let it charging for a bit then I tried to flash a stock ftf file ( Installing the drivers just how I explained at the beginning) via flashtool. I managed to put the phone in flash mode but the procedure failed when the program started to flash the system file.
3. So I let it charge for 25h: in the first 5h no led showed up, then blinking red led, then continuous red led and finally continuous green led.
4. After that I retried to flash a stock ROM via flash tool but the procedure failed again when it was flashing the file system.
5. So I made a desperate try: I flashed all partitions but system via flash tool, then I extracted the system partition opening the ftf file with a zip manager and I used the fastboot functionality in flashtool to flash the system partition.
6. After I did that, I didn't see any improvement and I decided to put the phone in charge again and..... The kernel battery charging symbol appeared!!!
7. I let the phone charge over night then I booted it up! He booted in provisory mode and I managed to turn on USB debug and I gave permissions to my PC.
8. Then I installed TWRP via adb and so Linage 14.1 custom ROM.
The only problem I found it's my battery is practically dead, so I will try to replace it by my self in near future (this phone as known battery issues)
This is the method I followed, I don't know if is equally good for your case but I Hope this steps somehow help you.
Hi all,
I recently received a note 5 SM-920i.
I rooted it and installed TWRP using a few guides from XDA. After that, i created a backup just in case (6.0.1) and tried to flash LineageOS. I didn't know that there was a difference between 920i/c/g/t etc and i just tried to flash without even checking.
When I tried flashing, installation got stuck (see pictures attached). I couldnt stop installation and go back to TWRP menu but i could take screenshots and swipe up and down. I tried to restart, hard reset, shut down but nothing helped, it was just stuck like this.
Once the battery ran out i wanted to charge the note 5 and try to go into recovery mod to re-install the backup but now its stuck on the charging logo even when its not connected to power. When I try to open it or go to recovery mode, nothing happens.
Has anyone ever had such an issue?
Would appreciate any help with this.
Thanks!!!
You need to flash stock rom with Odin. Volume up and power buttons same time about 7 second and right away when screen goes black volume down,home,power buttons same time. You get into download mode. Press volume up when first green display shows.
Download stock firmware for your model without auto restart options in Odin.
When you get pass firmware flash put your phone charger and leave there for little while. Then again force restart.
Volume, power button and keep those pressed so long that hopefully blue screen start and goes recovery mode and leave phone do work for you.
BTW all these custom roms some how not work for me.
Phone just start to be unstable and restart all the time.
Now finally I get stock nougat rom to work with Nova laugher.
Over 3 hours sot still 46% battery left and no single restart so far. Samsung pay off,GPS battery safe. Greenfinity.
Mobiledata 3G/2G. WiFi on. NFC off. Location history off.
That setup work for me and first time phone is stable.
And awesome battery life.
Hope this helps you.
apelamod said:
You need to flash stock rom with Odin. Volume up and power buttons same time about 7 second and right away when screen goes black volume down,home,power buttons same time. You get into download mode. Press volume up when first green display shows.
Download stock firmware for your model without auto restart options in Odin.
When you get pass firmware flash put your phone charger and leave there for little while. Then again force restart.
Volume, power button and keep those pressed so long that hopefully blue screen start and goes recovery mode and leave phone do work for you.
BTW all these custom roms some how not work for me.
Phone just start to be unstable and restart all the time.
Now finally I get stock nougat rom to work with Nova laugher.
Over 3 hours sot still 46% battery left and no single restart so far. Samsung pay off,GPS battery safe. Greenfinity.
Mobiledata 3G/2G. WiFi on. NFC off. Location history off.
That setup work for me and first time phone is stable.
And awesome battery life.
Hope this helps you.
Click to expand...
Click to collapse
Thanks, will try it now.
Where can i get stock firmware for the 920i? i looked for it everywhere and couldnt find it...
Great remember when battery is slow it's not start after flash but that method worked for me...
Go update.com ?
apelamod said:
Great remember when battery is slow it's not start after flash but that method worked for me...
Go update.com
Click to expand...
Click to collapse
So you dont know where i can find stock rom for sm-920i?
Sorry it was updato.com try that ?
roygush said:
So you dont know where i can find stock rom for sm-920i?
Click to expand...
Click to collapse
you can find at sammobile. register free member for download. but slow download
Sammobile but updato give faster download... Let me know if you get this work for you ?
My first full charge after fresh flash...