Updated my Note 8 to the German 4.4.2 and updated my GG1 to Tizen.....wont connect
Took watch back to Stock.....wont connect
It Pairs OK both devices show the same code then.......nothing!!! Tries to connect then on Phone says Failed!!
Samsung can fk right off the shower of bastds, no longer loyal to this brand!!!!
Someone please help...I really dont want to take my Note 8 back to 4.2.2 if I can help it
Cheers
Lee
Just installed Nightly 4.4.4 on my Note 8 and still will not connect
Someone please help!!!!!
Related
Posted in the wrong placeOk, I've had my Gear watch for about 6 months. After reading a lot of the post about Gear on XDA, I decided I wanted to upgrade to the latest firmware (NF1). I am currently on PDA:NA6 / CSC:NA6 (XAR). So I connected the Gear to my computer and started Kies 3. It offers to upgrade to PDA:NF1 / CSC:NF1 (XAR) which is what I want. Of course the upgrade fails. I get a message box that says: "ErrorCode=5,ErrorMessage=The operation completed successfully." but nothing has changed on the Gear.
After searching XDA for something that might explain this, and not finding anything, I decided to post this and see if anyone can help me. I'm thinking that it might be because there was another update in between these updates and that one was what switched the device to Tizen. Unfortunately, I can't figure out how to perform that update before I do this one. Can anyone help me, please.
Also, I do not want to root this device yet. I rooted my Asus Transformer Prime right after I bought it and could never go back nor get any updates for it. Since then, I don't root any of my devices until after I have replaced it.
Edit1: Posted in the wrong place, sorry. Could someone move this to "Galaxy Gear Q&A, Help & Troubleshooting"
Edit2: Never mind. I tried it again when I got home and it worked. Must be something in the security of my work network that was the problem.
Q&A for [GUIDE]How To Unbrick Your Galaxy Tab!
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [GUIDE]How To Unbrick Your Galaxy Tab!. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Galaxy Tab 3 T210R / Bricked?
OK, I know I screwed this up b/c I was tired when I was working on the tablet. It's a Galaxy Tab 3 7.0 T210R (one of several I'm working on). Feel free to say I"m an idiot, I already know it was a stupid mistake.
I reset to factory specs using the operating system after installing the KitKat 4.4.2 firmware update and TWRP. This was that last thing I did before the current status.
Current status is that it won't start, yet Odin registers the tablet as connected, and seemed to be able to reinstall the firmware & TWRP with a positive result.
UPDATE: I was able to connect kies which also seemed to complete a system update, except that the tablet still has a black screen and seemingly unresponsive buttons. This is so weird.
Sooooo, not sure if it's bricked or not, since Odin registers it being connected. However, Kies can't find it. And none of the buttons appear to work.
I have it plugged into the outlet charging at the moment (not the laptop). It was nearly fully charged when I screwed it up.
I have SD cards, and an a couple exact model tablets that work just fine with the new Firmware (4.4.2) and TWRP (2.8.20). Is it possible to clone one of the working ones onto this one?
The one thing I haven't done is try to install a new ROM.
Help? Bricked? Or... ?
Much appreciate any expertise or suggestions. Thanks.
Bricked, or not bricked? Samsung Galaxy T210R
gtcreative said:
OK, I know I screwed this up b/c I was tired when I was working on the tablet. It's a Galaxy Tab 3 7.0 T210R (one of several I'm working on). Feel free to say I"m an idiot, I already know it was a stupid mistake.
I reset to factory specs using the operating system after installing the KitKat 4.4.2 firmware update and TWRP. This was that last thing I did before the current status.
Current status is that it won't start, yet Odin registers the tablet as connected, and seemed to be able to reinstall the firmware & TWRP with a positive result.
___________________________________________
UPDATE: I was able to connect kies which also seemed to complete a system update, except that the tablet still has a black screen and seemingly unresponsive buttons. This is so weird.
Sooooo, not sure if it's bricked or not, since Odin registers it being connected. However, Kies can't find it. And none of the buttons appear to work.
I have it plugged into the outlet charging at the moment (not the laptop). It was nearly fully charged when I screwed it up.
I have SD cards, and an a couple exact model tablets that work just fine with the new Firmware (4.4.2) and TWRP (2.8.20). Is it possible to clone one of the working ones onto this one?
The one thing I haven't done is try to install a new ROM.
Help? Bricked? Or... ?
Much appreciate any expertise or suggestions. Thanks.
Click to expand...
Click to collapse
____________________________________________
Update 07/07/2015
I let the tablet's battery run down (as was suggested in one of the threads), and when I plugged it in to the AC power, I got the Samsung Galaxy logo!
I was then able to restart in download mode, and reinstall the md5 file via Odin. Not sure why letting the battery run down works, but at this point, I don't really care. I'm glad that the tablet could be resurrected from the dead, in spite of my mistake.
I hope this is helpful! :victory:
tab not showing up in ODIN
I have my galaxy tab soft bricked, but when I plug it in to ODIN, the pc does not recognise the tablet and therefore I can't reinstall the firmware, although the tablet is connected to the pc, as it gets charging when plugged in.
I've tried reinstalling samsung drivers, killing every samsung keys program running in background, another cable and even three different ODIN versions (v.1.7 // v3.07 // v.3.09), but it is not showing up in any version.
I have been looking for a solution since last year. last year I had windows 8 and it didn't work; then I upgraded to win 8.1. again nothing, and with windows 10 the same story. can anyone help me please?
thank you very much.
internal memory read only my p3100
hi ..
thanks in advance
i dont know what happened to my tab p3100, i am not able place any files in internal memory.
it will get into the main screen and gives bunch of errors like process google play is not working... bla bla bla...
i can uninstal the function but after reboot it will be there in the phone. i am bit tensed what is this is this a bricked one or?
please help me out i tried odin, through odin i installed omia rom 5.1 after that this error i am getting please help me out to solve this.
my phone already rooted..
Once again thanks hooping for the fix.
please mail the fix to [email protected]
Hey guys!
I just bought my Samsung Galaxy Note 4 phone from T-Mobile Hungary today. I brought it home , turned it on, and I saw KitKat. He offered me the upgrade to Lollipop, he even downloaded it, and then it said it would start the installation progress, it restarted and when it turned on recovery booting it said "error" With a +!+ in a red triangle and restarted again and I see KitKat, Lollipop is nowhere.
The phone is a couple hours old, no root , nothing.
Could you please help me?
Magica01 said:
Hey guys!
I just bought my Samsung Galaxy Note 4 phone from T-Mobile Hungary today. I brought it home , turned it on, and I saw KitKat. He offered me the upgrade to Lollipop, he even downloaded it, and then it said it would start the installation progress, it restarted and when it turned on recovery booting it said "error" With a +!+ in a red triangle and restarted again and I see KitKat, Lollipop is nowhere.
The phone is a couple hours old, no root , nothing.
Could you please help me?
Click to expand...
Click to collapse
Go here: http://forum.xda-developers.com/note-4/help is the thread for your device thos guys will know what to do and how to,ask around there my friend. Be ready to do a factory via recovery (i dont think it will solve your problem) or flash your stock rom with some software (99% it will work, the other 1% is damaged hardware). Of course you can always take the phone back to where you buy it.
unknown to me, I purchased a Gear Live that was developer edition and would not update... I used one of the tutorials on the site to get it back to 4.4 ( thank you ) ... it will boot now and connect to the phone, but when I hit SYSTEM UPDATE it displays a big GREY X and then says ERROR, TRY AGAIN....How can I get it to update ?? I have reset the watch numerous times and as I say, have finally got it to software version 4.4W from the developer edition 4.4W1.... thank you for any help you can give me...I also tried Samsung Kies to update it but it wont recognize the watch
Did you try to reset your Gear Live with this tool already?
http://forum.xda-developers.com/gear-live/development/utility-gear-live-watch-tool-t2846696
I had a similar problem once and could fix it using that thing.
Got it figured out...spent 6 hours trying to get it to download the update..reflashed, rebooted, used the tool, EVERYTHING !!! Gave up on it at work as i kept getting DOWNLOADING,OOPS SOMETHING WENT WRONG, TRY AGAIN ....ONLY to find out that when i left work and tried downloading AGAIN away from the works network, IT DOENLOADED FINE ! Something on the network blocked it i guess and would not let it download. ARGHHH ! Thanks for your help !
Hello everyone,
Firstly, I would like to express my gratitude to all the people who always shares their ideas on how to fix any phones that some might think it's already useless and ready to throw into the garbage
And since I'm one of those who've almost wanting to throw my Note 4 N910t because of whatever ways I did was always failed!
Now I just want to help and also share what I'ved done last week on how I put my Note 4 N910t back to its glory! AGAIN!!!
Okay, so my Note 4 N910t was bought at Amazon July 2017 and it was a refurbished one but I'm okay with that. For 5 months the phone was working great and I never click the OTA updates because I read here on internet that clicking the OTA updates will destroy my Note 4 N910t so I just used my phone on a daily basis until I got IPhone 7 plus last year 2018 and I stopped using my Note 4 N910t. So fast forward, I took my Note 4 last month June 2019 into my cabinet again and guess what? It became very slow then I decided to clicked the OTA update so I thought it will make a difference and voila the mmc appeared
So because I love fixing android phones through the help of xdadevelopers community, I decided to search on how to install different firmware so I was hoping maybe my phone will become faster and I first tried to use the lollipop 5.1.1 (DOK2) and installed using ODIN 3.9 and it works like a charm but sadly it became slow, rebooting a lot and hangs a lot. Then, I installed the MM (EPE3) with ODIN 3.09 and it works as well but the same thing happened with MMC read failed appeared. then I tried different firmwares until my phone became useless until it appears "need pit partitions" and I couldn't help but cry coz my phone cant turn on now and it's like already dead. It can only turn on if I put my phone in the freezer for 3 to 5 minutes and go to download mode or recovery mode only but not turning it on properly. Even tried Wakelock app but it didn't even help at all.
So after doing lots of ideas and following very carefully on how to fix some step by step guides on how to fix my phone I finally landed to Sammobile where lots of folks are recommending to get a stock firmware but its really slow at sammobile so I decided to google the firmware (EQG1) and use ODIN 3.12 last July 24, 2019 and voila! my phone turns on and became responsive again just like as new from the box! I am now using my phone for 1 week now and there's no any issues that I am facing since I installed it. No more slow, hang or stuck logo but only a very, very useful Note 4 N910t.
And for those who owns Note 4 N910t I will share to all of you exactly what I did and remember I'm just an ordinary noob person and not a pro
So I just downloaded the firmware (EQG1) at galaxyrom website then use ODIN 3.12 and follow these steps.
1. Download the (EQG1) and extract it in your pc
2. Download ODIN 3.12 in your pc and open it as administrator
3. Do not check/uncheck anything from the ODIN
4. Click AP and install the firmware you downloaded at galaxyrom.com wait until it says PASS (green color) on the upper left corner of ODIN
5. Click START then let it reboot normally and your done!
I just figured out that if I flashed my Note 4 N910t the same way I did it, other owners of N910t can make their dead Note 4 N910t become responsive again since we all have the same materials used from Samsung company. Please read the below points for your information.
1. Make sure your phone is above 50% charge!
2. Make sure that when you downloaded the firmware (EQG1) on the internet check if its installed completely! (this is very important coz some may think that it's already downloaded even it's not completed)
3. Make sure that your usb cable is acknowledge by your pc
4. Make sure that you put your usb cable in a working usb slot in your computer. (I did lot's of failed installation attempts until I noticed that the usb slot that I used wasn't working properly)
5. Do not use Wakelock app coz its useless!!!
6. I hope you follow the step by step procedure that I did and you should be good to go and have your Note 4 N910t working again just like new!!!
Happy installation!
PS. I am not responsible if whatever happens on your Note 4 N910t if you use my technique. I just shared of what I think that help my dead Note 4 N910t back into it's working condition.