Hello everyone,
Firstly, I would like to express my gratitude to all the people who always shares their ideas on how to fix any phones that some might think it's already useless and ready to throw into the garbage
And since I'm one of those who've almost wanting to throw my Note 4 N910t because of whatever ways I did was always failed!
Now I just want to help and also share what I'ved done last week on how I put my Note 4 N910t back to its glory! AGAIN!!!
Okay, so my Note 4 N910t was bought at Amazon July 2017 and it was a refurbished one but I'm okay with that. For 5 months the phone was working great and I never click the OTA updates because I read here on internet that clicking the OTA updates will destroy my Note 4 N910t so I just used my phone on a daily basis until I got IPhone 7 plus last year 2018 and I stopped using my Note 4 N910t. So fast forward, I took my Note 4 last month June 2019 into my cabinet again and guess what? It became very slow then I decided to clicked the OTA update so I thought it will make a difference and voila the mmc appeared
So because I love fixing android phones through the help of xdadevelopers community, I decided to search on how to install different firmware so I was hoping maybe my phone will become faster and I first tried to use the lollipop 5.1.1 (DOK2) and installed using ODIN 3.9 and it works like a charm but sadly it became slow, rebooting a lot and hangs a lot. Then, I installed the MM (EPE3) with ODIN 3.09 and it works as well but the same thing happened with MMC read failed appeared. then I tried different firmwares until my phone became useless until it appears "need pit partitions" and I couldn't help but cry coz my phone cant turn on now and it's like already dead. It can only turn on if I put my phone in the freezer for 3 to 5 minutes and go to download mode or recovery mode only but not turning it on properly. Even tried Wakelock app but it didn't even help at all.
So after doing lots of ideas and following very carefully on how to fix some step by step guides on how to fix my phone I finally landed to Sammobile where lots of folks are recommending to get a stock firmware but its really slow at sammobile so I decided to google the firmware (EQG1) and use ODIN 3.12 last July 24, 2019 and voila! my phone turns on and became responsive again just like as new from the box! I am now using my phone for 1 week now and there's no any issues that I am facing since I installed it. No more slow, hang or stuck logo but only a very, very useful Note 4 N910t.
And for those who owns Note 4 N910t I will share to all of you exactly what I did and remember I'm just an ordinary noob person and not a pro
So I just downloaded the firmware (EQG1) at galaxyrom website then use ODIN 3.12 and follow these steps.
1. Download the (EQG1) and extract it in your pc
2. Download ODIN 3.12 in your pc and open it as administrator
3. Do not check/uncheck anything from the ODIN
4. Click AP and install the firmware you downloaded at galaxyrom.com wait until it says PASS (green color) on the upper left corner of ODIN
5. Click START then let it reboot normally and your done!
I just figured out that if I flashed my Note 4 N910t the same way I did it, other owners of N910t can make their dead Note 4 N910t become responsive again since we all have the same materials used from Samsung company. Please read the below points for your information.
1. Make sure your phone is above 50% charge!
2. Make sure that when you downloaded the firmware (EQG1) on the internet check if its installed completely! (this is very important coz some may think that it's already downloaded even it's not completed)
3. Make sure that your usb cable is acknowledge by your pc
4. Make sure that you put your usb cable in a working usb slot in your computer. (I did lot's of failed installation attempts until I noticed that the usb slot that I used wasn't working properly)
5. Do not use Wakelock app coz its useless!!!
6. I hope you follow the step by step procedure that I did and you should be good to go and have your Note 4 N910t working again just like new!!!
Happy installation!
PS. I am not responsible if whatever happens on your Note 4 N910t if you use my technique. I just shared of what I think that help my dead Note 4 N910t back into it's working condition.
Related
Hi,
I installed a Cyanogenmod ICS 4.0.3. build 17 firmware on my Samsung Galaxy S I9000 almost 5 months ago from a tutorial. The update itself has been a fantastic experience from the start and I'm not sure if my current problem is even related to that firmware update. Apparently new users like me can't post URLs so I can't provide it now. If you need it let me know.
I have to admit that lately the phone has been rebooting every couple of days, or Android's been freezing and I had to remove the battery, but I didn't think too much of it. It wasn't too bad of a problem really, but this morning all of a sudden the device has become totally unusable. Help! :-/
The issue that's started since today is that my phone won't boot anymore. It seems to reboot somewhere during the boot process. There's only two screens that will be shown, before it reboots. When I remove the battery, put it back in and attach the charger, I will only see two charging screens. While charging, the device will also*reboot after a while.*
I can get into download-mode (volume-down + ok-button + power-key) but can't get into recovery mode (volume-up + ok-button + power-key).
Any ideas would be appreciated, thanks!
Greetings,
Adriaan
ps -> I have pictures of the booting screens and the charging screens but wasn't allowed to post them here. Again, if you need to see them please PM.
Hi,
I think you have to reflash using odin. You can be happy to reach download mode
I'll try that, thanks.
switch_42 said:
Hi,
I think you have to reflash using odin. You can be happy to reach download mode
Click to expand...
Click to collapse
just to be sure...
Just to be sure, could you please check that my logic is correct?
First off: the tutorial I had followed had me follow a few procedures:
first I updated Galaxy S with XXJVU Firmware
then rooted Galaxy S on XXJVU Firmware
after that I flashed CM 9, ICS 4.0.3. build 17 to the device
To which of these steps were you referring? My guess would be to take the last one, but perhaps it's wiser to restart the tutorial from the beginning. I'd appreciate any additional support you can give me, you can understand that I don't want to brick my device due to my misunderstandings..
Seems like a high overclock or high underclock
Sent from my GT-I9000
Helloworld294 said:
Seems like a high overclock or high underclock
Click to expand...
Click to collapse
Not sure what you mean there. In any event I've never taken any steps to overclock or underclock my device. Maybe it's going senile and I get to buy a galaxy s III soon
*phew* well my problem's been solved. Since I was able to get into download mode I flashed a baseline rom with Odin and found my way back to ICS. One surprise along the way was that from the same tutorial I had followed (and had happy results from) a few months ago, the step of using Odin to root the device wasn't working, it kept getting stuck at 'zImage' during the process! What's more, after that I was getting the BSOD image (the phone, exclamation mark and computer), which I found could be helped by using a 'One-Click Unbrick for Samsung devices'.
That was a XXJVU firmware. After some snooping around I found a different firmware than the one I had previously used and had switched from a XXJVU firmware to a XXJW4 firmware through a page on XDA-Developers. Did that. It worked. And now I'm back to ICS again, yay!
Thanks for the help along the way!
(Solved) and thank you everyone!
I have a Galaxy Note 5 for tmobile. I have been running Note 7 express rom. Also I had a backup or Hell Rom.
The problem is is I went to change the DPI settings and although I made a backup I forgot to take off the fingerprint lock or possibly delete a Google account and when the phone shut down and came back on it showed a custom boot animation. The boot animation was Biohazard.
At this time I have tried to download the last 4 firmwares DOK and PDH and the phone will go as far as to accept the boot but once it gets to where it should pass it will not. The phone will let me go into download mode however it won't let me do anything from that point and tells me that the custom binary has been blocked by FRP.
And hoping someone can help me as I can't afford a new phone at this time the phone is pristine and I'd hate to see it become a paperweight I took it in to Samsung and obviously pretended like I wasn't the one who did the damage and they said that they wasn't sure what it was or what it was doing but it wasn't working so I quickly realized that I had no help there and I thought I'd ask my brothers and sisters here.
If anyone can direct me to the right software or a proper flashing tool that might be able to get past the FRP lock please let me know as I am dying here in Ohio without my phone.
Thank you in advance all
DAD12345 said:
I have a Galaxy Note 5 for tmobile. I have been running Note 7 express rom. Also I had a backup or Hell Rom.
The problem is is I went to change the DPI settings and although I made a backup I forgot to take off the fingerprint lock or possibly delete a Google account and when the phone shut down and came back on it showed a custom boot animation. The boot animation was Biohazard.
At this time I have tried to download the last 4 firmwares DOK and PDH and the phone will go as far as to accept the boot but once it gets to where it should pass it will not. The phone will let me go into download mode however it won't let me do anything from that point and tells me that the custom binary has been blocked by FRP.
And hoping someone can help me as I can't afford a new phone at this time the phone is pristine and I'd hate to see it become a paperweight I took it in to Samsung and obviously pretended like I wasn't the one who did the damage and they said that they wasn't sure what it was or what it was doing but it wasn't working so I quickly realized that I had no help there and I thought I'd ask my brothers and sisters here.
If anyone can direct me to the right software or a proper flashing tool that might be able to get past the FRP lock please let me know as I am dying here in Ohio without my phone.
Thank you in advance all
Click to expand...
Click to collapse
Are you saying you tried stock firmware flash to phone? Download the stock firmware from samsung official website and flash through ODIN. If it fails try a different cable, try a different USB port (sometimes 2.0 and 3.0 fail for unknown reasons), try using windows 7 instead of 8, 8.1, and 10 or vice versa. Use a different version of ODIN. These are all common ODIN issues that cause flash to fail. Should accept a flash of completely stock firmware.
Let me know what you come up with.
obliviousmnd said:
Are you saying you tried stock firmware flash to phone? Download the stock firmware from samsung official website and flash through ODIN. If it fails try a different cable, try a different USB port (sometimes 2.0 and 3.0 fail for unknown reasons), try using windows 7 instead of 8, 8.1, and 10 or vice versa. Use a different version of ODIN. These are all common ODIN issues that cause flash to fail. Should accept a flash of completely stock firmware.
Let me know what you come up with.
Click to expand...
Click to collapse
Thank you, I will try those
obliviousmnd said:
Are you saying you tried stock firmware flash to phone? Download the stock firmware from samsung official website and flash through ODIN. If it fails try a different cable, try a different USB port (sometimes 2.0 and 3.0 fail for unknown reasons), try using windows 7 instead of 8, 8.1, and 10 or vice versa. Use a different version of ODIN. These are all common ODIN issues that cause flash to fail. Should accept a flash of completely stock firmware.
Let me know what you come up with.
Click to expand...
Click to collapse
Great news ! I found a photo of my settings on accident and was able to factory reset with Smart Switch. Tha k you for your time helping me.
Awesome i glad everything worked out for you. May want to edit title to [solved] or something
Hello everyone. I updated my rooted OP3T (with TWRP installed for recovery) to OOS 4.0.1(I think? I know for sure it was 4.0.x) a week or so ago using a VPN as I live in the US and today I got the new update for whatever version that was about 30 mb, and after I rebooted I got stuck booting into TWRP so I followed the guide linked underneath here and got up to step 12 (flashing beta 9) and after swiping to restart my phone will not turn on in any way, shape, or form. Whenever I plug it in/unplug it from my computer I'll still get the Win10 device connected/disconnected sound and if I hold the power button for long enough while it's plugged in I'll get another device connected sound or disconnected, usually followed by the opposite sound. There doesn't seem to be a pattern to the sounds, but if anyone knows what's happening I really need help with this as it's the only phone I was able to afford and if it's bricked I don't know if I have the money for another one. Thanks
https://forum.xda-developers.com/showpost.php?p=70102813&postcount=5
Lol no wonder your phone doesn't work anymore. You flashed the beta to the OP 3 onto your 3T. Use this to fix your phone.
Edit: Sorry if this was of use to some people when it was deleted.
Just Passing By said:
Lol no wonder your phone doesn't work anymore. You flashed the beta to the OP 3 onto your 3T. Use this to fix your phone.
Click to expand...
Click to collapse
I tried to use that thread, but my phone wouldn't show up underneath Unknown Devices, in fact unknown devices would never come up at all. my pc is still in test mode from this :/
Don't worry if it doesn't appear under unknown devices. Just use the tool. A lot of what the instructions say is unnecessary. Just make sure that when you plug in your phone that one of the ports becomes "active" (I haven't had to use this tool in months, so I'm not sure exactly what it's supposed to say exactly) and press the start button.
Edit: Sorry if this was of use to some people when it was deleted.
ok. I 'll download the tool and get back to you after trying it.
edit:that worked! you are my new favorite person.
thank you so much )))))))))
Deleted
WAIT
Just Passing By said:
Deleted
Click to expand...
Click to collapse
WHY IS THIS DELETED? IM having the same problem what did you do please save me as well
Sounds like you flashed the wrong version of Oneplus 3 firmware to your phone. Do you have a 3 or a 3t? If you flash the incorrect one you will get exactly the unbootable state you describe. In that case you will have to use Qualcomm MSM Downloader tool to flash back the correct ROM and firmware partitions to get it running again. Just download the correct MSM recovery package for your phone and follow the instructions in the thread.
Use winrar to extract the tar and use odin to flash, if you never used odin before google instructions on how.
Here are the links to my mega account
if mega won't let you download the whole files let me know where I can upload the files for free.
AP: - https://mega.nz/#!IpF0CDTB!kY0uQCA3oO7LRaIOOeDYHHceLFViRy4g53airAHLhso
BL: - https://mega.nz/#!hsdkSBga!xKwZl_wv97dj53424-DmQMwIqcSRSJ87Tr43VaQCkSw
CP:- https://mega.nz/#!lstnyARR!P8kO5qlki9ltVEOW5SA323ms4wwFeE1AqFWbvxyWLy0
CSC:- https://mega.nz/#!Q80gjQTA!Z3A8HngK--uy5ZHCcAVyfpUzY1MHaRlOjSKx0urtZuk
And this is the odin version I used, don't know if it works with others
Odin 3.0.9 - https://mega.nz/#!wwEgSJoB!7pNy1ODdegBPPHKoHHfgzRPQlIiW1wt-pjE-7fNbFX8
Thank you for these files! I was successful in using odin to install marshmallow but was not able to use kingroot to root the phone. Do you or anyone else have a way to root the phone with Marshmallow? Or better yet, nougat? I guess my only option now is to go back to kitkat, then the updates for lollipop and root from there and stay on lollipop.
sorry, hurricane Maria wrecked everything here in Puerto Rico, today finnally I got some signal again, as for my previous post, I miss typed that after marshmallow you can't root, there is no root in marshmallow for this tablet, if you find root please post it here
Other server download please
I won't be able to ad another server, the files are on my computer and its been 54 days without power
c-prodigo said:
I won't be able to ad another server, the files are on my computer and its been 54 days without power
Click to expand...
Click to collapse
Hope your situation in Puerto Rico has improved!! Best.
Well, its been 71 days, and still no power, I just arrived to the states, to stay for good, thanks for your wishes, all I could bring of my pc was the motherboard, cpu, ram and the hard drives, hope in a couple of months buy a case and the rest to put it back together, Puerto Rico's situation is bad, so I took my wife and kids, and with sadness, left the rest of our family, who will try to continue the struggle to survive there.
What exact version is this? JW if its the version I have. I'm about to switch back to 5.
c-prodigo said:
Well, its been 71 days, and still no power, I just arrived to the states, to stay for good, thanks for your wishes, all I could bring of my pc was the motherboard, cpu, ram and the hard drives, hope in a couple of months buy a case and the rest to put it back together, Puerto Rico's situation is bad, so I took my wife and kids, and with sadness, left the rest of our family, who will try to continue the struggle to survive there.
Click to expand...
Click to collapse
Sorry to hear that. I hope you the best. I am headed there in March for business.
I used Odin to flash AP my Galaxy Tab these days. But Odin always said " Complete(Write) operation failed" . I have installed Samsung driver and turned on developer mode of Tab.
Anycone can help ?
If I understand this correctly, I place the files in the corresponding boxes in Odin, then click Start? I understand how to use Odin. I just want to be certain I understand the files....
Thx!
Thank you, was stuck on Lollipop and was just now able to flash to Marshmallow with these files. Appreciated!
Can I with this file upgrade Galaxy Tab S SM-T707A with baseband version T707AUCU1ANH9 ?
Thanks
After 5 days waiting for response I do on my risk and work !
Bravo for me !
Hi. Think this may be my first post. I've beenen watching this sight for years now every since my first smart device. With all the knowledge this website has I'd have to say this is my first time messing up a device. Long story short. Rooted my s6 with excellent result with odin and cf autoroot (zerofltetmo-zeroflteue-smg920t). Worked great until i started deleting apps that i thought i didnt need. About 3 minutes into it poped started coming up so amd so stoped working. Rebooted into what i thought was a boot loop. Kies and smartswap both detect my phone but says its not compatible. If i go into download mode and try to use odin with any firmware odin fails.
Current binary:custom
System status:custom
Fap lockff
Secure doenload: enable
Knox warrent void:1(0x0500)
Rp swrev: b:6 k:3 s:4
Then when i try to use odin(ap button)it fails right after
Single download.
Sboot.bin
FAIL!
then on the phone it will say in red
SW REV. CHECKFAIL. DEVICE:6, BINARY:5
I was up until 4 am this morning trying multiple things and effed it up even worse. It dosent help that i flashed the kernel and now at the galaxy s6 screen it freezes and says kernel is not seandroid enforcing. Ive spent about 4 hours last night trying to find stock kernels and roms to no avail. I would like to get it back in order and use it again. I normaly dont ask for help but i will need it here. I have never had to deal with a messed up phone. Also i did not back anything up. Actually i never have. Dumb move i know
I'm guessing this It's a dead cause because it's an old phone. Still have it sitting here if someone decides to help. Went and bought an LG style 3. What a pos. Dropped it 3 inches and the screen shattered. Soooo went and bought an galaxy s9. My wife would love to use the s6 because she also hates her lg style 3. Waiting for my savior!
Try using this frimware
https://updato.com/firmware-archive-select-model?record=62B4939F374A11E89F15FA163EE8F90B
got it working again thanks to another thread https://forum.xda-developers.com/ga...-galaxy-s6-t3532127/post70397843#post70397843