I am not far of smashing this GG1 to a million peices....
Upgraded to Tizen.....phone does not connect, pairs OK but then....nothing
Upgraded Phone from stock 4.2.2 to a German stock 4.4.2.....phone does not connect, pairs OK but then....nothing
Downgraded watch from Tizen to stock......phone does not connect, pairs OK but then....nothing
Trying to now downgrade the phone back to stock ROM with BTU United Kingdon 4.2.2 and get following in ODIN
On phone.......SW REV. INVALID MAGIC STRING
On odin.......
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N5120XXCMK1_N5120BTUCML1_N5120XXCMJ2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Will someone PLEASE HELP!!!!!!!!!!!!!!!
The issue with your phone isn't a Galaxy Gear issue and really belongs in the forum for the phone you're trying to fix.
That being said, it's difficult to downgrade from Android 4.4 to 4.2. There may be a special method required that - again - requires you search the correct place. Additionally, using a version of Android lower than 4.3 on your phone will result in your phone not being compatible with the Gear because versions prior to 4.3 don't support Bluetooth 4.0, which is required for the Gear to connect.
guyHalestorm said:
The issue with your phone isn't a Galaxy Gear issue and really belongs in the forum for the phone you're trying to fix.
That being said, it's difficult to downgrade from Android 4.4 to 4.2. There may be a special method required that - again - requires you search the correct place. Additionally, using a version of Android lower than 4.3 on your phone will result in your phone not being compatible with the Gear because versions prior to 4.3 don't support Bluetooth 4.0, which is required for the Gear to connect.
Click to expand...
Click to collapse
Have been using it on 4.2.2
Related
Hello,
Just flashed my GT-I9070 according to the how-to of qzem with the recommended settings.
This worked out once, then I was trying another firmware, this didn't work out (phone was hanging at the Samsung GT-I9070 start-screen), so I thought: "OK, lets do the other firmware again".
So entered the download mode and tried to flash the "old" firmware again (XXLD1.tar) but it just does something very fast (not really installing) and reboots again with hanging at the start screen.
OK, so lets got to the "recovery-mode"... not possible!
Did this now a few times, but everytime the same result, just a quick full download bar and restarting with hanging.
Did I kill my phone? :crying:
ODIN look also fine...
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> xxld1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> kernel.bin.md5
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/005> Removed!!
PLEASE HELP ME!!!
Thanks so much
Thomas
UPDATE:
After installing a stock ROM everything worked fine again, also recovery mode.
BUT on installing the rrotkernel.tar of qzem it again hangs at the start-screen.
So problem is reduced on that step.
So how to unlock my phone without that rootkernel???
I was also struggling with qzem's method, didn't brick it but I couldn't root it. Would be nice if someone could clarify this, I'm curious.
So I ended up with a pre-rooted firmware from diego's thread. Many links are down but since you're voiding your warranty
by rooting then what's the point in having a firmware for your country? Just keep in mind that pre-rooted should match the base one, if you're gonna do this.
tommym74 said:
Hello,
Just flashed my GT-I9070 according to the how-to of qzem with the recommended settings.
This worked out once, then I was trying another firmware, this didn't work out (phone was hanging at the Samsung GT-I9070 start-screen), so I thought: "OK, lets do the other firmware again".
So entered the download mode and tried to flash the "old" firmware again (XXLD1.tar) but it just does something very fast (not really installing) and reboots again with hanging at the start screen.
OK, so lets got to the "recovery-mode"... not possible!
Did this now a few times, but everytime the same result, just a quick full download bar and restarting with hanging.
Did I kill my phone? :crying:
ODIN look also fine...
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> xxld1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> kernel.bin.md5
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/005> Removed!!
PLEASE HELP ME!!!
Thanks so much
Thomas
UPDATE:
After installing a stock ROM everything worked fine again, also recovery mode.
BUT on installing the rrotkernel.tar of qzem it again hangs at the start-screen.
So problem is reduced on that step.
So how to unlock my phone without that rootkernel???
Click to expand...
Click to collapse
Try flashing JB Roms , rooting JB is easy , download root.zip by Shaan and just flash it through recovery and u ve a rooted phone now..
Link is http://forum.xda-developers.com/showthread.php?t=2087424
Hi,
few days back i installed cyanogenmod on my phone (galaxy note 1 n7000 international version). after few days the phone restarted and got stuck on samsung note logo with yellow triangle
I tired installing stock firmware using odin , but every time i tried , odin failed to write on the device. there was no progress bar on the screen.
can anyone help me with this?
Not enough details:
What rom version did you try to install?
Did Odin "see" your device? (Uninstall Kies, install Samsung USB Device Driver separately)
Where die Odin stop? (snapshot)
ThaiDai said:
Not enough details:
What rom version did you try to install?
Did Odin "see" your device? (Uninstall Kies, install Samsung USB Device Driver separately)
Where die Odin stop? (snapshot)
Click to expand...
Click to collapse
Hi ,
i tried using N7000DDLSC_N7000ODDLSC_N7000DDLS6_HOME.tar.md5 , odin identifies the device
following is the log of odin
ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000DDLSC_N7000ODDLSC_N7000DDLS6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Firmware update start..
<ID:0/005> system.img
<ID:0/005> NAND Write Start!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
Please make a snapshot of Odin, so we can see the details etc. And you do not need to write down everything. Thanks
Hello people.
This started couble of weeks ago when my phone suddendly went to factory mode. it wasent rooted and i was running 4.3 so i took it to the repair center. They told me that the phones circuit board needed to be replaced and it would cost 281€. Since the same phone new was only 299€ i declined their repair. then i went on a search for way to repair the phone my self. I wound some ways but they needed a root acces. So i tried to downgrade my phone back to 4.1.2 but for some reason Odin started to give me this error...
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9305XXBMI3_I9305NEEBMH1_I9305XXBMH3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> tz.img
<ID:0/003> NAND Write Start!!
<ID:0/003> sboot.bin
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
And then when i restarted my phone it keeps giving me yet another error saying that "Firmware upgrade encountered an issue. please select recovery mode in Kies & try again. In kies the phone wont connect to it. it just keeps loading. Now im asking for some help if some1 has an idea or a way to fix this.
I can give more info if needed.
it fails cause you are trying to flash 4.1.2...once you got 4.3 you can't go back...i'm guessing that you get that error when it tries to install the old bootloader(without knox counter)....
spiderman07 said:
it fails cause you are trying to flash 4.1.2...once you got 4.3 you can't go back...i'm guessing that you get that error when it tries to install the old bootloader(without knox counter)....
Click to expand...
Click to collapse
yeah i figured that out. tryed to follow a guide but it dident work... but flashed to 4.3 and that worked and auto rooted my phone and factory mode gone and everything is back to normal
I have a Galaxy note 10.1 running kitkat 4.4.2 (GT-N8000)
Yesterday i was browsing the internet when suddenly the device decided to shut down and went on a restart boot loop where it would show the "Samsung galaxy note 10.1" screen for a while and then reboot and re-show the same screen
i have tried entering recovery mode but the tablet keeps restarting without end the only thing i can access is download mode
So recently i tried flashing using Odin but when ever i try to flash any file it shows this error
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have tried flashing a stock recovery so i can try and wipe the current data
I have tried to download multiple stock roms from jelly bean to kitkat which all ended up failing
I have tried flashing the tablet with a "Repair rom" which contains the BL AP CSC and Modem files
i think that if i can still access the download mode that there is some hope to recover?
Any solutions?
Thanks in advance.
If i posted this in the wrong section forgive me i have just started out
Hey devs,
I'm using a5-2016 (sm-a510fd) with nougat. Today I've tried to downgrade to marshmallow because many Xposed modules I was using isn't working in nougat firmware. But one error which is troubling me a lot and I haven't encountered something like this for a while.
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> cm.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
After this i've installed TWRP recovery and wiped system+data+cache+dalvik+internal , formatted data too but bad luck i keep on getting this error and my mobile is just dead for now. i've tried different usb ports and different usb cables repeating same process all over again. Same process all over and no luck so far. I require a lot of modules and customizations to survive because i'm legally blind and only Xposed help me make my life easier with my mobile. Waiting for help.
yadu123 said:
Hey devs,
I'm using a5-2016 (sm-a510fd) with nougat. Today I've tried to downgrade to marshmallow because many Xposed modules I was using isn't working in nougat firmware. But one error which is troubling me a lot and I haven't encountered something like this for a while.
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> cm.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
After this i've installed TWRP recovery and wiped system+data+cache+dalvik+internal , formatted data too but bad luck i keep on getting this error and my mobile is just dead for now. i've tried different usb ports and different usb cables repeating same process all over again. Same process all over and no luck so far. I require a lot of modules and customizations to survive because i'm legally blind and only Xposed help me make my life easier with my mobile. Waiting for help.
Click to expand...
Click to collapse
Sorry Brother, You can't downgrade using Odin. Because Samsung blocks marshmallow bootloader when you are on Nougat Bootloader. YOU CAN ONLY UPGRADE using Odin. YOU CAN'T DOWNGRADE USING ODIN.
You can't go to Marshmallow stock from Nougat Stock using ODIN. I think u understood the concept. Try flashing a Nougat Firmware. You will not get any error. If u want marshmallow again, then u have to go for CUSTOM ROMs.
Hope this Helped u. Pressing Thanks Button proves that.??
Few months back I have upgraded to nougat and downgraded back to marshmallow without any problem.I was trying something new on my phone that tìme and it just bricked on me . So I flashed a nougat firmware and was using without root for sometime and it doesn't work for me much. Now I have flashed nougat firmware and phone is working and I want marshmallow. In S6 forum I saw someone had same problem and some pit file solved it and I have no idea what they have done.
yadu123 said:
Hey devs,
I'm using a5-2016 (sm-a510fd) with nougat. Today I've tried to downgrade to marshmallow because many Xposed modules I was using isn't working in nougat firmware. But one error which is troubling me a lot and I haven't encountered something like this for a while.
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> cm.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
After this i've installed TWRP recovery and wiped system+data+cache+dalvik+internal , formatted data too but bad luck i keep on getting this error and my mobile is just dead for now. i've tried different usb ports and different usb cables repeating same process all over again. Same process all over and no luck so far. I require a lot of modules and customizations to survive because i'm legally blind and only Xposed help me make my life easier with my mobile. Waiting for help.
Click to expand...
Click to collapse
yadu123 said:
Few months back I have upgraded to nougat and downgraded back to marshmallow without any problem.I was trying something new on my phone that tìme and it just bricked on me . So I flashed a nougat firmware and was using without root for sometime and it doesn't work for me much. Now I have flashed nougat firmware and phone is working and I want marshmallow. In S6 forum I saw someone had same problem and some pit file solved it and I have no idea what they have done.
Click to expand...
Click to collapse
it wont work anymore bro. Just understand. If u want marshmallow... make system dumb using assayed kitchen amd flash.