Hi,
few days back i installed cyanogenmod on my phone (galaxy note 1 n7000 international version). after few days the phone restarted and got stuck on samsung note logo with yellow triangle
I tired installing stock firmware using odin , but every time i tried , odin failed to write on the device. there was no progress bar on the screen.
can anyone help me with this?
Not enough details:
What rom version did you try to install?
Did Odin "see" your device? (Uninstall Kies, install Samsung USB Device Driver separately)
Where die Odin stop? (snapshot)
ThaiDai said:
Not enough details:
What rom version did you try to install?
Did Odin "see" your device? (Uninstall Kies, install Samsung USB Device Driver separately)
Where die Odin stop? (snapshot)
Click to expand...
Click to collapse
Hi ,
i tried using N7000DDLSC_N7000ODDLSC_N7000DDLS6_HOME.tar.md5 , odin identifies the device
following is the log of odin
ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000DDLSC_N7000ODDLSC_N7000DDLS6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Firmware update start..
<ID:0/005> system.img
<ID:0/005> NAND Write Start!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
Please make a snapshot of Odin, so we can see the details etc. And you do not need to write down everything. Thanks
Related
Hello,
While using Sygic navigation dad's galaxy ace (S5830i) got frozen, I restarted it by pushing the power button for a few seconds, but the phone didn't start up, just showing the samsung logo animation again and again... i tried to use recovery mode but it says it "failed to mount /data (invailed agrument).
So I thought i reinstall the original software, that I found on sammobile.com, but while I was installing it, some kind of error happened:
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5830iXXLA4_S5830iOXXLA2_RST_S5830iXXLA2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl.bin
<ID:0/005> BcmCP.img
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The phone is rooted, all drivers are installed on my pc.
I used more than one versions of Odin, including the version offered by sammobile.com (this is what you can seen on the screenshot)
Im so faithless about the phone now... :crying:
ps: i wasnt able to insert a link because its my first post, so see the screenshot attached.
Hi
valaky said:
Hello,
While using Sygic navigation dad's galaxy ace (S5830i) got frozen, I restarted it by pushing the power button for a few seconds, but the phone didn't start up, just showing the samsung logo animation again and again... i tried to use recovery mode but it says it "failed to mount /data (invailed agrument).
So I thought i reinstall the original software, that I found on sammobile.com, but while I was installing it, some kind of error happened:
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5830iXXLA4_S5830iOXXLA2_RST_S5830iXXLA2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl.bin
<ID:0/005> BcmCP.img
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The phone is rooted, all drivers are installed on my pc.
I used more than one versions of Odin, including the version offered by sammobile.com (this is what you can seen on the screenshot)
Im so faithless about the phone now... :crying:
ps: i wasnt able to insert a link because its my first post, so see the screenshot attached.
Click to expand...
Click to collapse
Hi there. How's the problem? I also got the same problem, flashing a firmware from sammobile and failing to flash it even if I use the .pit file i found on other threads. But you still have a chance. Download the Pda.tarhere and place it in the PDa section. do not use any pit file. it worked for me, I soft bricked my s5830i several times already and the PDA.tar works like a charm. I got it from here thanks to ickyyy
valaky said:
Hello,
While using Sygic navigation dad's galaxy ace (S5830i) got frozen, I restarted it by pushing the power button for a few seconds, but the phone didn't start up, just showing the samsung logo animation again and again... i tried to use recovery mode but it says it "failed to mount /data (invailed agrument).
So I thought i reinstall the original software, that I found on sammobile.com, but while I was installing it, some kind of error happened:
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5830iXXLA4_S5830iOXXLA2_RST_S5830iXXLA2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl.bin
<ID:0/005> BcmCP.img
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The phone is rooted, all drivers are installed on my pc.
I used more than one versions of Odin, including the version offered by sammobile.com (this is what you can seen on the screenshot)
Im so faithless about the phone now... :crying:
ps: i wasnt able to insert a link because its my first post, so see the screenshot attached.
Click to expand...
Click to collapse
S5830i only accepts a three file odin installation method. The .PDA file mentioned in the second post is also valid, but its an older firmware for s5830i. Please checkout this thread http://forum.xda-developers.com/showthread.php?t=1822109 to install latest firmware downloaded and made compatible for odin. Details are in the thread. I hope this helps and if it does don't forget the thank button
EDIT: Rebooted my computer and phone and it flashed fine. Thank you for all the help. I'm off to explore the world of custom roms.
Finally decided to root my phone and install CM9 from GB 2.3.6 with the LA4 Kernel. Downloaded everything I needed as per Post 3 of this thread. Accidentally flashed the newer kernel instead of the pre rooted ROM.
Realizing my mistake, I tried flashing the correct ROM and PC Odin gives me a failure. The phone won't boot, it just stays stuck on the Galaxy Note N7000 Logo with an exclamation mark at the bottom.
Check if you have cwm (power+home +volume up) If so then flash this get the standard version, then go advanced options and reboot recovery...
After that do all wipes data/cache/Dalvik cache then flash the cm9 for n7000,then flash cm9 GApps then reboot...
After the system boots to android set it up and download triangle away and use it to get rid of the yellow triangle
If you don't have cwm then download a stock GB rom and flash it via odin... Start from scratch
Cheers
Tapatalking on my GT-N7000
what is the error pc odin giving you?
Don't quite remember anymore since it was from this morning. All I recall is the little box on the top left going red.
Could I try replicating the problem or do I risk damaging my phone?
odin won't damage the phone. As above poster said check if you have cwm, else use Odin again
nokiamodeln91 said:
odin won't damage the phone. As above poster said check if you have cwm, else use Odin again
Click to expand...
Click to collapse
No, I don't have CWM so I've been downloading a stock rom since I saw that post should take an hour with glorious third world internet. In the meantime should I fish out that error message you requested or is it not worth it at this point?
If you need all data back and everything to be working I would recommend you to flash back the same ROM you had earlier using odin.
Go back to Square 1.
Then root it from Dr Ketan's post.
as you downloading the rom. you are going to use Odin again. Let know the error
Yeap, another fail while using PCOdin.
Going to install samsung USB drivers from the file in this thread and get rid of Kies.
Here's the stuff from the little window.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLA4_N7000OXALA4_N7000XXLA4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> factoryfs.img
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/007> Added!!
Edit: Tried again after reinstalling drivers. Still no go.
<ID:0/003> Removed!!
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLA4_N7000OXALA4_N7000XXLA4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
great
I'm new here and I couldnt find a thread which had the same problem as me solved so here we go!
I tried manually installing the official jellybean firmware on my N7000 following the steps exactly (usb debugging on, download mode etc) Once I started to run Odin everything was fine until a massive FAIL occured. This is what Odin said
"<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000ZSLM5_N7000OZSLM5_N7000XXLSO_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> cache.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)"
Anyway now my phone won't start, it will turn on and but it gets stuck on the Samsung Logo, I booted it into recovery mode, wiped cache, user data and rebooted but it was still stuck on the Samsung logo. How do I fix my phone from here??
Have you installed the drivers on your pc?
64 bit - http://drivers.softpedia.com/get/MOBILES/Samsung/Samsung-Galaxy-S-USB-Driver-for-Windows-x64.shtml
32 bit - http://drivers.softpedia.com/get/MOBILES/Samsung/Samsung-Galaxy-S-USB-Driver-for-Windows-x86.shtml
Install the driver and then try again
Sent from my GT-N7000 using Tapatalk 2
check if kies is running.. close it from task manager... run odin as admin.. aslo before flashing again.. you need to power off and reboot into download mode
Thank you!!
Thanks, that's what I hadn't done, install the drivers. All working good now and have to say its great to finally have jellybean on it!
guys i was on india jellybean official and was planning to install paranoid android
so i dowladed pholz kernal and flashed it rebooted phone
then i powered it off and went into recovery and did wipe(one which has system data cache)
then i did apply update from ext sd . but i found that my ext sd card has been clean wiped and lost all my data
and i planned to do reboot but my phone was stuck on samsung galaxy note
now i used odin to install ginjer bread on my note but odin went to factoryfs and then it shows fail
then i tried to install jellybean with odin and again same thing
following is the log in odin
<ID:0/016> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000DDLSC_N7000ODDLSC_N7000DDLS6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/016> Odin v.3 engine (ID:16)..
<ID:0/016> File analysis..
<ID:0/016> SetupConnection..
<ID:0/016> Initialzation..
<ID:0/016> Get PIT for mapping..
<ID:0/016> Firmware update start..
<ID:0/016> factoryfs.img
<ID:0/016> NAND Write Start!!
<ID:0/016>
<ID:0/016> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/016> Removed!!
<ID:0/017> Added!!
guys plz help what shud i do
i am out of warranty
thanks
now when i restart my phone it shows
firmware upgrade encountered a issue plz select recovery mode in kies and try again
actually got tensed
then uninstalled kies and retried flashing gb with odin and was successfull
No Problem
sitanshu91 said:
actually got tensed
then uninstalled kies and retried flashing gb with odin and was successfull
Click to expand...
Click to collapse
Its Not problem of Mobile
Its a problem in USB Cable
Plz Use Different USB cable
Always remember to kill kies via task manager (on PC) before using odin. Also remember to pause exit the antivirus software just to be sure.
Sent from my GT-N7000 using xda app-developers app
Hello,
Just flashed my GT-I9070 according to the how-to of qzem with the recommended settings.
This worked out once, then I was trying another firmware, this didn't work out (phone was hanging at the Samsung GT-I9070 start-screen), so I thought: "OK, lets do the other firmware again".
So entered the download mode and tried to flash the "old" firmware again (XXLD1.tar) but it just does something very fast (not really installing) and reboots again with hanging at the start screen.
OK, so lets got to the "recovery-mode"... not possible!
Did this now a few times, but everytime the same result, just a quick full download bar and restarting with hanging.
Did I kill my phone? :crying:
ODIN look also fine...
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> xxld1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> kernel.bin.md5
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/005> Removed!!
PLEASE HELP ME!!!
Thanks so much
Thomas
UPDATE:
After installing a stock ROM everything worked fine again, also recovery mode.
BUT on installing the rrotkernel.tar of qzem it again hangs at the start-screen.
So problem is reduced on that step.
So how to unlock my phone without that rootkernel???
I was also struggling with qzem's method, didn't brick it but I couldn't root it. Would be nice if someone could clarify this, I'm curious.
So I ended up with a pre-rooted firmware from diego's thread. Many links are down but since you're voiding your warranty
by rooting then what's the point in having a firmware for your country? Just keep in mind that pre-rooted should match the base one, if you're gonna do this.
tommym74 said:
Hello,
Just flashed my GT-I9070 according to the how-to of qzem with the recommended settings.
This worked out once, then I was trying another firmware, this didn't work out (phone was hanging at the Samsung GT-I9070 start-screen), so I thought: "OK, lets do the other firmware again".
So entered the download mode and tried to flash the "old" firmware again (XXLD1.tar) but it just does something very fast (not really installing) and reboots again with hanging at the start screen.
OK, so lets got to the "recovery-mode"... not possible!
Did this now a few times, but everytime the same result, just a quick full download bar and restarting with hanging.
Did I kill my phone? :crying:
ODIN look also fine...
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> xxld1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> kernel.bin.md5
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/005> Removed!!
PLEASE HELP ME!!!
Thanks so much
Thomas
UPDATE:
After installing a stock ROM everything worked fine again, also recovery mode.
BUT on installing the rrotkernel.tar of qzem it again hangs at the start-screen.
So problem is reduced on that step.
So how to unlock my phone without that rootkernel???
Click to expand...
Click to collapse
Try flashing JB Roms , rooting JB is easy , download root.zip by Shaan and just flash it through recovery and u ve a rooted phone now..
Link is http://forum.xda-developers.com/showthread.php?t=2087424