[Q] Sony Z1 C6903 root issues - Xperia Z1 Q&A, Help & Troubleshooting

Hi guys
I have a problem whenever I flash my rom using the flashtool64bit version 09.15.0 build on 15-13-2014 it works fines I can get into the Xperia OS no issues there
I then enable developer option and apply security setting so it allows third party apps to be install.
I then apply the ADB and fastboot run the command as per fastboot flash boot boot.img this too works fine.
I enter CWN ROM manager by turning the power off holding the vol button up and down , and here is my problem
when I select the file Update-superuserv2.zip it runs fine no errors there my problem is when I reboot at this stage
I get "Sony" logo and it just goes into a while loop nor matter how many times I reflash
additional information
I manage to unlock the bootloader
I followed instruction to to root the device
again nor matter what method I tried I can't by pass the "sony" logo to fix this I have to reflash again and this does work but when I install Clockwork it states the device is not rooted ?
I am a totally newbie to this and really would appreciate a dummy proof instruction please.

which boot.img did you flash?
Please post a link

Hi there
thanks for the reply back , I flash CWM clockwork boot.img
I am unable to insert a link as I haven't posted 10 post yet , I obtain this information from ibtimes website .co.uk
I hope this answer the question

That will not work as there is no recovery partition on an xperia device
Just flash a custom kernel, it will contain recovery.

160
gregbradley said:
That will not work as there is no recovery partition on an xperia device
Just flash a custom kernel, it will contain recovery.
Click to expand...
Click to collapse
thanks again for that reply , now I am going to sound very dumb , where can I download a custom kernel, from .
I have try downloading the ftf file from xperiafirmware dot com/8-firmware/42-sony-xperia-z1-c6903 site , issue when I install the ROM manager from clockwork it states "You must root your phone for ROM manager to function SuperUser vas not found at /system/bin/su" I have already applied UPDATE_SuperSUv2.zip file via the boot process where you press the vol button up and down , the issue is when it reboot it does not pass the "sony" logo just goes into while loop

just look in the development section of the exact same forum you are posting in....

gregbradley said:
just look in the development section of the exact same forum you are posting in....
Click to expand...
Click to collapse
hey buddy thanks for the supported I sorted it my device is now rooted , and its my first time
I used this instruction androidadvices.com/root-install-cwm-recovery-sony-xperia-z1-android-phone-guide/#.U6whr3lOUdU
from the site it worked , best part about the instruction is each step they provide you with the file you need to download and that really makes it easy .
thanks again

Related

How to remove CWM

I checked everywhere and I can't fine it. How to remove this horrible CWM ? Anything . I need anything! I tried to install 4EXT when CWM was still on and phone now seems to be bricked. It doesn't want to boot into the system or recovery. It just hangs on HTC white boot logo. Please help.
birkopf said:
I checked everywhere and I can't fine it. How to remove this horrible CWM ? Anything . I need anything! I tried to install 4EXT when CWM was still on and phone now seems to be bricked. It doesn't want to boot into the system or recovery. It just hangs on HTC white boot logo. Please help.
Click to expand...
Click to collapse
This should have been posted in the General section, not the Development section.
If you can boot the phone into HBOOT, then you can flash a new recovery image in FASTBOOT USB mode.
If you have more questions post in the GENERAL section after you have searched.
hey just reboot ur phone by connecting with usb to fastboot mode n flash the official roms frm htc tht comes with exe. files...after flashing an official rom the CWM will be gone nd u can flah other recovery or u can go for a direct recovery image as tpbklake mentioned ..and this not the section for discussing this problem plz move the post to general section bro
djroobs said:
hey just reboot ur phone by connecting with usb to fastboot mode n flash the official roms frm htc tht comes with exe. files...after flashing an official rom the CWM will be gone nd u can flah other recovery or u can go for a direct recovery image as tpbklake mentioned ..and this not the section for discussing this problem plz move the post to general section bro
Click to expand...
Click to collapse
I already did http://forum.xda-developers.com/showthread.php?t=1703914&goto=newpost
Would you be so kind and provide more info there for me ? Possibly links to Rom with .exe extension? I can't find them anywhere and I am very short on time as I travel. Dory to be a pain but I really need this phone working quickly. Why I needed to mess it up while abroad!

[Q] S3 I9305 won't boot in custom recovery

Hi Guys,
I have s3 GT-I9305, android version 4.1.2, baseband version I9305XXBLL5. Australian model for Optus.
I successfully rooted and installed Philz_Touch_6.19.3 _ After that I could do Nandroid online backup and confirm it is rooted.
When I tried to flash custom ROM today - I found I can't boot in CWM/Philz recovery mode. Then I tried to different version of Philz/CWM and TWRP but none worked. It keeps booting in stock recovery mode- I get message as shown in attached image.
PS: I have USB diagnosis checked but haven't unlocked boot loader?
to be specific: my phone works fine - boots fine - It is just I want to load custom rom and it won't go to custom recovery and I can't load custom ROM.
Thanks.
HELP!
can anyone please help me out here!
I kept searching and found some solution but none worked.
I used triangle away. - didn't work
Installed custom recovery without checking auto reset and started after pulling battery out. - didn't work
It still boot in odin mode and I can't go to custom recovery
i have the same problem too when i got my phone flashed 3rd recovery last year,
the stock recovery can automaticly restore itself after reboot~
but i found the solution here in xda,just flash a zip to unlock the self-protection of the stock recovery~
i will tell you the link and the attachment several hours later after my work,if you cannt wait, you can search it here,maybe you can find it yourself.
Sent from my GT-I9305
Aphirodite said:
i have the same problem too when i got my phone flashed 3rd recovery last year,
the stock recovery can automaticly restore itself after reboot~
but i found the solution here in xda,just flash a zip to unlock the self-protection of the stock recovery~
i will tell you the link and the attachment several hours later after my work,if you cannt wait, you can search it here,maybe you can find it yourself.
Sent from my GT-I9305
Click to expand...
Click to collapse
I had a quick search but couldn't find it. Will greatly appreciate if you can post link.
Thanks
even after you flash a custom recovery...your phone will automatically flash stock recovery every time it reboots...so that's why you will get into stock even if you flash CWM/TWRP or what you like.....
here is the solution: http://forum.xda-developers.com/gal...-cf-root-cwm-recovery-ported-supersu-t1914394
read at the end of the first post....WORKAROUND......
i used myself and worked....
ggmm2013123 said:
I had a quick search but couldn't find it. Will greatly appreciate if you can post link.
Thanks
Click to expand...
Click to collapse
the guy offered the post which included the solution.
try to flash the "Remove-boot-recovery.p.zip",it will work..
good luck
:fingers-crossed:
Done
Thanks guys.
Above solution didn't work for me but I got it working through rom manager App. I reboot to recovery through ROM Manager and it worked.
How ever After I installed Pacman rom, I couldn't use App as there were no Gapps and wouldn't boot to recovery. The workaround here was to press home, volume up and lock button simultaneously and release it after few second and it will go to custom recovery.
In the end, I am on Pacman Nightly 06/04/2014 with Philz touch recovery.

Flashed SOKP with CWM, now recovery is gone

Hey guys,
strange thing happened to me yesterday.
After I got fed up with Paranoid, I decided to pick one of the other AOKP derivatives.
Although I had initial problems with mounting sdcard1, I somehow managed to flash from there
and do have SOKP with android 4.4.4 running on my honami
the thing is, when I want to access recovery through vol+ or vol-, my phone freezes on boot,
otherwise everything is working fine.
Unfortunately I need to flash GAPPS and I need to find some kind of workaround...
What I have tried is flashing TWRP and Z1DualRecovery via fastboot with no success.
Any ideas?
Thanks in advance
What is SOKP? Any link you can give us?
Did the kernel for that ROM include a recovery?
TWRP cannot be installed via fastboot on xperia devices. Z1dualrecovery kernel is for stock based roms only.
Maybe you should flash a FTF and start again.
you have unlocked bootloader, let flash pimp kernel to have working recovery, so you can reflash the rom to check it.
Sent from my C6903
gregbradley said:
What is SOKP? Any link you can give us?
Did the kernel for that ROM include a recovery?
TWRP cannot be installed via fastboot on xperia devices. Z1dualrecovery kernel is for stock based roms only.
Maybe you should flash a FTF and start again.
Click to expand...
Click to collapse
SOKP is Sonic Open Kang, a newer AOKP derivate.
It is one of the top posts in Android Development Forum.
Thought you heard of it.
Ok thanks will try it with pimped kernel. Hope it works with AOKP.
lauchrecords said:
SOKP is Sonic Open Kang, a newer AOKP derivate.
It is one of the top posts in Android Development Forum.
Thought you heard of it.
Ok thanks will try it with pimped kernel. Hope it works with AOKP.
Click to expand...
Click to collapse
I have seen it now, try flashing and wiping again
Hey, thanks for the fast response guys.
So I've just flashed Pimped Kernel to this ROM
http://forum.xda-developers.com/xperia-z1/development/xperia-z1-t2834169
I am still getting stuck on boot when I'm trying to get into recovery.
Neither vol+ not vol- works, I hit it when the purple light flashes and the orange one comes up and stays like forever.
So unfortunately I cannot flash nor wipe.
And Android without GAPPS kinda sucks... especially when they have the new material design...
EDIT: And I don't want to stay on pimped kernel cuz it somehow causes battery drain for me...
Only possibility would be to somehow install the zip via ADB/Fastboot... does that work somehow?
Just keep pressing it throughout the boot sequence, don't forget you have to press, let go, press, let go etc..... Its not just one long press
gregbradley said:
Just keep pressing it throughout the boot sequence, don't forget you have to press, let go, press, let go etc..... Its not just one long press
Click to expand...
Click to collapse
Just tried that out, in both directions.
Same result - no success.
Really unusual since it was always a long press and I should also be getting into the recovery
by rebooting into recovery from inside the ROM.
What other possibilities are there to get gapps on your phone?
lauchrecords said:
Just tried that out, in both directions.
Same result - no success.
Really unusual since it was always a long press and I should also be getting into the recovery
by rebooting into recovery from inside the ROM.
What other possibilities are there to get gapps on your phone?
Click to expand...
Click to collapse
push them with adb
but that's not the point
have you booted into system and check to see if quick boot is enabled in developer options - root
gregbradley said:
push them with adb
but that's not the point
have you booted into system and check to see if quick boot is enabled in developer options - root
Click to expand...
Click to collapse
I dont seem to have that option,
all I have is the point "Update CM Recovery when installing system updates"
@gregbradley how do I push and flash those via ADB?
Check in the gapps zip where each file should be installed (Proabably all to system/app) and the associated permissions (Should be 0755 or 0644, I don't have time to check just now)
Then put all the files in the same folder where you have adb installed.
then
Code:
adb push "[I]name of file here[/I]" system/app/"[I]name of file here[/I]"
adb chmod 0755 system/app/"[I]name of file here[/I]"
Replace the name of the file with the extension where I have said, change the "0755" to "0644" if that's what it says in the updater script, and if the apks should be installed somewhere else (for example syste/priv-app) change the commands to that.
This method would take you a long time, proabably best to just push the play store and then download the google apps you want, or better still, fix your recovery
Ok guys, many many thanks for your help.
I solved the problem and got my recovery back.
I flashed PhilZ and I like it. Way better than regular CWM.
You can close the thread now.

[Solved]Wiped complete system rom, no os is installed.

OK people i won't talk much, i by mistake in twrp went to wipe then advance wipe and selected everything in there (including system)( i got a 158 mb update to v10d software i did that but it kinda failed cuz it rebooted once and got to twrp and stayed on it forever all other reboots take me to twrp and nothing else and then i wiped everything after trying many times cuz i was mad ).
SO yeah now there's no os installed in it.
BTW i have l90 D410 the dual sim version v10c software rooted and unlocked bootloader with guides from XDA only.
To fix myself i tried downloading CM 11 and tried flashing the zip from twrp at first i got w7ds error telling my device is not w7, so i searched a bit and got something which said change updater script and edit "w7" to "w7ds" in the first few lines. So i did that and tried to flash again but then i got MD5 does not match
WHAT should i do?
ATM im just stuck on twrp with no os installed in my l90 or say i have a completely wiped l90 with twrp recovery and a sd card (8 gb) and when trying to reboot twrp says your device doesnt look rooted install supersu to root it (obviously swiping to install dont work), other twrp functions are working good.
HELP PLSsssss most appreciated.
regards,
[IND]sattu
sattu_96 said:
OK people i won't talk much, i by mistake in twrp went to wipe then advance wipe and selected everything in there (including system)( i got a 158 mb update to v10d software i did that but it kinda failed cuz it rebooted once and got to twrp and stayed on it forever all other reboots take me to twrp and nothing else and then i wiped everything after trying many times cuz i was mad ).
SO yeah now there's no os installed in it.
BTW i have l90 D410 the dual sim version v10c software rooted and unlocked bootloader with guides from XDA only.
To fix myself i tried downloading CM 11 and tried flashing the zip from twrp at first i got w7ds error telling my device is not w7, so i searched a bit and got something which said change updater script and edit "w7" to "w7ds" in the first few lines. So i did that and tried to flash again but then i got MD5 does not match
WHAT should i do?
ATM im just stuck on twrp with no os installed in my l90 or say i have a completely wiped l90 with twrp recovery and a sd card (8 gb) and when trying to reboot twrp says your device doesnt look rooted install supersu to root it (obviously swiping to install dont work), other twrp functions are working good.
HELP PLSsssss most appreciated.
regards,
[IND]sattu
Click to expand...
Click to collapse
Did you try installing stock rom with kdz files using guides to be found on L90 general (I think) section?
sattu_96 said:
To fix myself i tried downloading CM 11 and tried flashing the zip from twrp at first i got w7ds error telling my device is not w7, so i searched a bit and got something which said change updater script and edit "w7" to "w7ds" in the first few lines. So i did that and tried to flash again but then i got MD5 does not match
Click to expand...
Click to collapse
What thread did you get your recovery from, @Quarx CM11? There is an option in TWRP on the page that's displayed right after selecting files to install, "Zip file signature verification". Make sure it's unchecked. Unchecking that option should bypass the MD5 verification and allow the installation. Unfortunately, you may have to continue with editing the updater-script on new installs.
I'll speak with @shoxxy and @Quarx about creating recoveries for the dual sim devices so that we can prevent this error from happening anymore. This will mean that there will eventually be 2 different sets of recoveries available for the L90. One set for dual-sim devices, and one set for single sim devices. By recovery set, I mean all available recoveries, CWM, TWRP, and Philz-Touch.
The reason for TWRP not installing SuperSU to root the OS is because there is no OS to root.
wojtek267 said:
Did you try installing stock rom with kdz files using guides to be found on L90 general (I think) section?
Click to expand...
Click to collapse
umm bro how could i do that since it requires my l90 to be in different modes while doing that, but i can only boot uptill twrp and there's no os in there.(btw i have stock kdz downloaded on my pc)
shinobisoft said:
What thread did you get your recovery from, @Quarx CM11? There is an option in TWRP on the page that's displayed right after selecting files to install, "Zip file signature verification". Make sure it's unchecked. Unchecking that option should bypass the MD5 verification and allow the installation. Unfortunately, you may have to continue with editing the updater-script on new installs.
I'll speak with @shoxxy and @Quarx about creating recoveries for the dual sim devices so that we can prevent this error from happening anymore. This will mean that there will eventually be 2 different sets of recoveries available for the L90. One set for dual-sim devices, and one set for single sim devices. By recovery set, I mean all available recoveries, CWM, TWRP, and Philz-Touch.
The reason for TWRP not installing SuperSU to root the OS is because there is no OS to root.
Click to expand...
Click to collapse
i believe i got twrp from google (damn) , by md5 verification you mean that zip file verification should have a cross infront of it or not? well w/e it is i tried in both ways (having cross and not having one) but it checks for md5 both times, maybe because i dont have twrp from quarx thread.
Can i update my twrp to quarx's one? if so how pls tell, would be much helpfull.
EDIT : atm i have downloaded few files that might be needed to unbrick(stock kdz file, cm11 28/10 build, twrp image from quarx) on my pc
UPDATE
OK i got to install cm11 on my device and when i try to fix permissions is says a SELinux is present (good) but phone is still just booting in twrp only.....
HELPPPP
nooooooo some1 pls help im desperate.......
p.s. why doesnt twrp remember my settings, i set screen timeout to 15 sec, after every reboot i have to w8 full 60 sec to get its screen timeout to be able to use the touch screen.
EDIT: OK guys dont bother yourself now i got myself running cm11 on my phone and its unbricked now. Cheers and thanks for your time.
if any1 wants me to tell what happened to my device how it happened and how i fixed w/e i tried etc then pls tell i might write it down for some other people who might be stuck.
sattu_96 said:
OK i got to install cm11 on my device and when i try to fix permissions is says a SELinux is present (good) but phone is still just booting in twrp only.....
HELPPPP
nooooooo some1 pls help im desperate.......
p.s. why doesnt twrp remember my settings, i set screen timeout to 15 sec, after every reboot i have to w8 full 60 sec to get its screen timeout to be able to use the touch screen.
EDIT: OK guys dont bother yourself now i got myself running cm11 on my phone and its unbricked now. Cheers and thanks for your time.
if any1 wants me to tell what happened to my device how it happened and how i fixed w/e i tried etc then pls tell i might write it down for some other people who might be stuck.
Click to expand...
Click to collapse
you said that u updated ur device to 10d..
Thats d problem.....
If u updated ur phone without stock recovery..
It will struck at twrp..
If u try to flash roms..
but still u'll struck at twrp (It happens to me tooo)
After rebooting the phone is directly enter into recovery mode to flash new update ..
I don't know where the update file and script stored but until its updated its still struck at the same twrp..
if u remove cache/delvik cache/data/system..
But still its trying to update phone by entering into recovery mode.......
So,
Only one solution to this.
Flash kdz file using offline method.
Here's link to thread
http://forum.xda-developers.com/lg-l90/general/guide-flash-stock-kdz-offline-lg-l90-t2803479
but after flashing kdz 10C.
It'll automatically update to 10d (Don't panic at this)..
kprsnt said:
Only one solution to this.
Flash kdz file using offline method.
Here's link to thread
http://forum.xda-developers.com/lg-l90/general/guide-flash-stock-kdz-offline-lg-l90-t2803479
but after flashing kdz 10C.
It'll automatically update to 10d (Don't panic at this)..
Click to expand...
Click to collapse
the problem here is that my phone was not in usb debugging mode before brick and i spent 6-7 hrs figuring out how to get my device detected, but it never got detected in my pc.
BTW my prob for now is solved since my phone is running cm11 very well, its true that i lost some good functionality like knock on, qslide apps, quick window software, etc. but at least it has an os to boot into now.
help
sattu_96 said:
OK i got to install cm11 on my device and when i try to fix permissions is says a SELinux is present (good) but phone is still just booting in twrp only.....
HELPPPP
nooooooo some1 pls help im desperate.......
p.s. why doesnt twrp remember my settings, i set screen timeout to 15 sec, after every reboot i have to w8 full 60 sec to get its screen timeout to be able to use the touch screen.
EDIT: OK guys dont bother yourself now i got myself running cm11 on my phone and its unbricked now. Cheers and thanks for your time.
if any1 wants me to tell what happened to my device how it happened and how i fixed w/e i tried etc then pls tell i might write it down for some other people who might be stuck.
Click to expand...
Click to collapse
hey brother same problem here. after flashinf L-touch rom on my galaxy S duos (gt-s7562) i got stuck in boot screen, nothing is going after it.
then i tried installing flashable twrp recovery from cwm recovery, and then followed the procedure to install L-touch rom. but when i reboot my device it says " no os installed" and asks me to install superuser. ( i think my os and my root access are gone now).
please hepl me out brother.
thanks and regards,
dhaval
You need to download the firmware (around 900mb) not cm ROM (300mb)
Sent from my GT-I9192 using XDA Free mobile app
i have found out how to fix this what you need to do is first flash a rom zip file get your stock recovery image for your device and flash it via twrp select install than install image find your stock recovery image then flash it then it will boot to the previous rom you tried to install then you can reflash twrp and all good

Bricked device Urgent

I unlocked boot loader and downloaded rom to flash,extracted rom and flashed boot.img from zip via flash tool,now phone cant boot,only black screen,i cant turn it off to get to flash mode please help
i didint gived any picture only black screen,i tried 100x and i dont know how it gone to flash mode and i flashed stock ftf
Its booting now,i hope it will work
please tell me how to install cm12.1 i tried many tutorials but no succes and now i bricked device
Nikola_98 said:
i didint gived any picture only black screen,i tried 100x and i dont know how it gone to flash mode and i flashed stock ftf
Its booting now,i hope it will work
please tell me how to install cm12.1 i tried many tutorials but no succes and now i bricked device
Click to expand...
Click to collapse
So, is it working or not?
If yes, please flash the stock 5.0.2. Install Xperia Z dual recovery, there is a script that installs dual recovery with just one click. Just connect the device on the pc, enable developer options, enable usb debug and allow to do its thing.
When running the script select option 3, 5.0.2 without root.
After you install the recovery, you can flash any rom you want from there, just make sure to do the correct wiping before and after. happy flashing
Its working now,is there tutorial for flashing recovery
Nikola_98 said:
Its working now,is there tutorial for flashing recovery
Click to expand...
Click to collapse
Could not find any tutorial, here is the manual though : http://nut.xperia-files.com/html/xzdualrecovery-manual.html
Anyway you can follow these simple steps:
1. Flash stock 5.0.2 ftf
2. After phone boots, enable Developer Options and from there enable USB debug
3. Connect phone to PC.
4. Assuming you have Windows, Download the Recovery installation Tool here: http://nut.xperia-files.com/?ql=ef9a86aff9041bf1734fc9e3afe75f084d655774
5. Extract, hit the Installer and just follow the instructions from there.
For more info check the official thread about XZ Dual Recovery here: http://forum.xda-developers.com/showthread.php?t=2261606
If you need help ask, but make sure you quote me so I can get a notification.
Thank you for help
is there any way to flashcm12.1 with its recovery?
Or can i flash cm recovery img with flashtool and flash cm from that recovery?
Nikola_98 said:
Thank you for help
is there any way to flashcm12.1 with its recovery?
Or can i flash cm recovery img with flashtool and flash cm from that recovery?
Click to expand...
Click to collapse
I cannot see any official CM builds, if you like any Rom in the forum, please write to that thread because I'm not really sure.
If you want to experiment, you can! Because if anything goes wrong you can always use flashtool
I saw some builds on cm website,is that official?
Nikola_98 said:
I saw some builds on cm website,is that official?
Click to expand...
Click to collapse
Yes, there are official builds but those are Nightly - which means they're not ready yet for everyday use but only as test versions.
You will not have a fully functional phone because there might be many bugs in those Roms.
Here is a Rom I personally use and find very nice: http://forum.xda-developers.com/xperia-z/development/rom-official-sony-lollipop-5-1-1-t3196237
Thank you !

Categories

Resources