Related
Is that supposed to happen? Is it safe to assume that my mid is PN0710000 then? if not, how should I fix this?
Wait, where is written this MID?
in adb when trying to fastboot getvar all. It probably didn't help that it says getvar all failed, but I'm stuck here
Wait, if you will you the command:
Code:
fastboot getvar all
you musb be in fastboot usb.
If you're in android, you can boot in fastboot with the command:
Code:
adb reboot bootloader[/url] and now you can use the getvar.
p.s. Post it here deleting imei and serial number :)
I did it just like that, did it a couple more times just to make sure, and still got the same result. Anyways:
C:\adb>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.44.0000
INFOversion-baseband: 4A.14.3250.13
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 5.29.401.13
INFOversion-misc: PVT SHIP S-OFF
INFOserialno: xxxxxxxxxx
INFOimei: xxxxxxxxx
INFOmeid: 00000000000000
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOmodelid: PN071****
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 4310mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.067s
Click to expand...
Click to collapse
please tell me this can be fixed...
Habel said:
I did it just like that, did it a couple more times just to make sure, and still got the same result.
Click to expand...
Click to collapse
Your version main start with 5, when the latest base starts with 3, and this is strange.
However, have you flashed some firmware in this period?
Probably there is a solution, but i don't know atm.
well, I just bought this phone yesterday (yay me), realized something was off when I couldn't OTA update (which is because of S-off), and now afraid to just flash the new 3.62 firmware because of the stars (asterisks?). could it be i did something wrong with the commands?
Try to flash a ruu for your phone
ok, I'll take a look at that. thanks for your help Guich
edit: what kind of RUU should I get? do i need to match it with the bootloader or something else, or any one of them works?
Habel said:
ok, I'll take a look at that. thanks for your help Guich
edit: what kind of RUU should I get? do i need to match it with the bootloader or something else, or any one of them works?
Click to expand...
Click to collapse
A ruu compatible with your cid
Because you're s-off and all ruu can be flashed fine!
hey Guich, I took your advice and tried to flash the RUU, but now i'm getting very confused. the flashing went fine, but I see no changes on my phone. In Settings>About>Software Information the software version is still 1.29.401.13, while getvar all shows me that the version is 3.62.401.1. Is there anything I'm misunderstanding here?
edit: do i need to unlock the bootloader for any of this?
I have same PN071**** I dont remember what was there before I have it from Ebay probly some Chinesse version but the cover say that it is PN714000, I accidently changed S-OFF to S On and flashed another rom.I cant do S-OFF anymore tried many things. Riffbox doesnt work with 714000 unfortunately.
Hi hopefully someone can help me out here.
My HTC One is running Android Revolution HD 41.0, TWRP 2.6.3.3. Last night for no apparent reason the phone shut down, when i tried to power it back on it was caught in a boot loop, getting no further than the HTC logo screen. I can get into the bootloader by holding the volume down key but not recovery. This morning it powered on fine and I have been using it for a few hours today - the phone lost charge and I am now in the same situation again. The only way i can get into recovery is by reflashing using fastboot then immediately booting into it. I can only access the recovery once per flash. Whilst in recovery i attempted to backup the phone and it once again shut down (17% charge at this point).
Does anyone have any suggestions? Should I attempt to reflash the ROM from the recovery? Or try another recovery as there seems to be an issue with the recovery partition also.
samp94 said:
Hi hopefully someone can help me out here.
My HTC One is running Android Revolution HD 41.0, TWRP 2.6.3.3. Last night for no apparent reason the phone shut down, when i tried to power it back on it was caught in a boot loop, getting no further than the HTC logo screen. I can get into the bootloader by holding the volume down key but not recovery. This morning it powered on fine and I have been using it for a few hours today - the phone lost charge and I am now in the same situation again. The only way i can get into recovery is by reflashing using fastboot then immediately booting into it. I can only access the recovery once per flash. Whilst in recovery i attempted to backup the phone and it once again shut down (17% charge at this point).
Does anyone have any suggestions? Should I attempt to reflash the ROM from the recovery? Or try another recovery as there seems to be an issue with the recovery partition also.
Click to expand...
Click to collapse
I would RUU back to stock and see if the recovery partition gets repaired look here >> http://forum.xda-developers.com/showthread.php?t=2541082
clsA said:
I would RUU back to stock and see if the recovery partition gets repaired look here >> http://forum.xda-developers.com/showthread.php?t=2541082
Click to expand...
Click to collapse
I'm currently S-ON, to S-OFF rumrunner says i need to have my passcode disabled. That's not possible as I can't boot... any ideas?
The passcode doesn't matter then
Sent from my HTC One using Tapatalk
I still don't think i'm going to be able to s-off with rum runner as it requires the phone to be booted to andoid "Ensure device is booted to android with usb debugging enabled". I can't boot to android, do i have any other options?
Here's the output of fastboot getvar:
INFOversion: 0.5
INFOversion-bootloader: 1.54.0000
INFOversion-baseband: 4A.17.3250.14
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 2.24.401.8
INFOversion-misc: PVT SHIP S-ON
INFOserialno:
INFOimei:
INFOmeid: 00000000000000
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOmodelid: PN0710000
INFOcidnum: HTC__001
INFObattery-status: good
INFObattery-voltage: 4016mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-d959c75800
INFOhbootpreupdate: 11
INFOgencheckpt: 0
samp94 said:
I still don't think i'm going to be able to s-off with rum runner as it requires the phone to be booted to andoid "Ensure device is booted to android with usb debugging enabled". I can't boot to android, do i have any other options?
Here's the output of fastboot getvar:
INFOversion: 0.5
INFOversion-bootloader: 1.54.0000
INFOversion-baseband: 4A.17.3250.14
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 2.24.401.8
INFOversion-misc: PVT SHIP S-ON
INFOserialno:
INFOimei:
INFOmeid: 00000000000000
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOmodelid: PN0710000
INFOcidnum: HTC__001
INFObattery-status: good
INFObattery-voltage: 4016mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-d959c75800
INFOhbootpreupdate: 11
INFOgencheckpt: 0
Click to expand...
Click to collapse
and you are unable to flash or reflash a ROM?
nkk71 said:
and you are unable to flash or reflash a ROM?
Click to expand...
Click to collapse
I'm now unable to power the phone on, i've had it on charge for a few hours now and still nothing. Holding the power and volume down button doesn't work either. I was previously able to install new recovery images but flashing a new ROM didn't work as I kept experiencing hanging issues in recover and the last ROM flash crashed TWRP.
I'm considering returning the phone as it is still within warranty but i'm worried i'll have trouble as it has been rooted. Does anyone have any experience of returning a rooted phone?
some workarounds
samp94 said:
I'm now unable to power the phone on, i've had it on charge for a few hours now and still nothing. Holding the power and volume down button doesn't work either. I was previously able to install new recovery images but flashing a new ROM didn't work as I kept experiencing hanging issues in recover and the last ROM flash crashed TWRP.
I'm considering returning the phone as it is still within warranty but i'm worried i'll have trouble as it has been rooted. Does anyone have any experience of returning a rooted phone?
Click to expand...
Click to collapse
I am a newbie too but wanted to let everyone know concerning "not charging". I have seen where this is an issue with problem flashes and THIS can be resolved by having a wireless charging unit handy:
http://www.phonearena.com/news/How-...hone-Windows-or-BlackBerry-smartphone_id65805
And for us HTC users, problems have just become a mute point:
http://forum.xda-developers.com/showthread.php?t=2183023
lee
So I got my HTC one and rooted it immediately and Installed Cyanogenmod 11. I love Cyanogenmod but my SMS and MMS messages were all screwed up. I booted back up from my backup and noticed that It was running Android 4.3, 4.4 is available so I tried to install the update, It failed so I realized this must be because I was rooted so I went about going back to stock HTC Sense. I relocked the bootloader and ran RUU but the program crashed. After that I was only able to get to the fastboot page, recovery would crash. I ran a few different verisons of RUU but each one failed (error 155 being most prevalent). I unlocked my bootloader again and cyanogenmod started to boot up but never got through. I wipe data and cache. CM still won't boot. I reflashed the CWM recovery and tried to load the back up that I had. I get multiple errors about not being able to mount /system, /cache everything. I installed TWRP and tried to do sideload, not working. I have a USB OTG cable and I tried to load files that way, no good. I don't have S-Off and I can't boot into a rom so I can't get S-Off. I've exhausted google, not sure what to do now. Here is a breakdown.
*** Tampered ***
*** Unlocked ***
M7_WLS PVT SHIP S-ON RH
HBOOT-1.55.0000
RADIO-1.00.20.1108
OpenDSP-v32.120.274.0909
OS-3.05.651.6
eMMC-boot 2048MB
Jan 3 2014,13:35:00.0
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 1.00.20.1108
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.05.651.6
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: SPCS_001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4082mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-35824024
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
I've tried flashing a different firmware but I get the error
C:\Users\Administrator\Downloads\fastboot>fastboot flash zip firmware.zip
sending 'zip' (20935 KB)...
OKAY [ 2.090s]
writing 'zip'...
(bootloader) adopting the signature contained in this image...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) Read zipped android_info fail
FAILED (remote: 99 unknown fail)
finished. total time: 2.340s
I've tried to run my exact version of RUU, found here.
http://forum.xda-developers.com/show....php?t=2576995
The Ruu window won't even open, I've run as administrator, in all sorts of compatibility modes. I've run it on my windows 8 pc, windows 7 pc and from mini-windowsXP. None of them could start.
Like I've said I've exhausted my resources. I appreciate any and all of the help I can get. Thank you!
-Brycery91
Brycery91 said:
The Ruu window won't even open, I've run as administrator, in all sorts of compatibility modes. I've run it on my windows 8 pc, windows 7 pc and from mini-windowsXP. None of them could start.
Like I've said I've exhausted my resources. I appreciate any and all of the help I can get. Thank you!
-Brycery91
Click to expand...
Click to collapse
Did you check the MD5 on the download?
Did you disable all security ( anti virus etc) on your PC.
Use Windows 7.
Did you relock your bootloader.
Sent from my HTC One using XDA Premium 4 mobile app
bored_stupid said:
Did you check the MD5 on the download?
Did you disable all security ( anti virus etc) on your PC.
Use Windows 7.
Did you relock your bootloader.
Click to expand...
Click to collapse
I Will check MD5 when I get back from work. I have all security disabled, not even firewall is enabled, I've used windows seven and I have relocked my boot loader. I was able to find an alternative version of The RUU I needed on the same thread I downloaded from. Here is the working link to the thread/download http://forum.xda-developers.com/showthread.php?t=2576995.
Brycery91 said:
I Will check MD5 when I get back from work. I have all security disabled, not even firewall is enabled, I've used windows seven and I have relocked my boot loader. I was able to find an alternative version of The RUU I needed on the same thread I downloaded from. Here is the working link to the thread/download http://forum.xda-developers.com/showthread.php?t=2576995.
Click to expand...
Click to collapse
That is official RUU, your BEST hope! http://dl3.htc.com/application/RUU_..._NV_SPCS_4.38_003_release_348053_signed_2.exe
Lock your bootloader, put the phone in bootloader mode where it says FASTBOOT USB on your phone screen and run the RUU package. IF It is NOT working, please post back with screenshot of the error!
SaHiLzZ said:
That is official RUU, your BEST hope! http://dl3.htc.com/application/RUU_..._NV_SPCS_4.38_003_release_348053_signed_2.exe
Lock your bootloader, put the phone in bootloader mode where it says FASTBOOT USB on your phone screen and run the RUU package. IF It is NOT working, please post back with screenshot of the error!
Click to expand...
Click to collapse
Ok i'm not sure if this is the same RUU from the thread I linked, but on the page 5, "Ph33zy" linked a working exe. I ran that and it went through! What a relief! My phone is running again! Thanks everyone for your help! I worked on this for hours and I feel so embarrassed cause I feel like a noob!
Glad your up and running again.
Sent from my HTC One using XDA Premium 4 mobile app
I was in the same place... searching around whole world, coming back hopeless.. then sent it back to HTC... they used like 1 sec to restore it...
Brycery91 said:
Ok i'm not sure if this is the same RUU from the thread I linked, but on the page 5, "Ph33zy" linked a working exe. I ran that and it went through! What a relief! My phone is running again! Thanks everyone for your help! I worked on this for hours and I feel so embarrassed cause I feel like a noob!
Click to expand...
Click to collapse
That's great. Thanks for posting back!
Glad it worked out! You might want to remove the serial number and meid from your original post though.
hi the same thing is going on
but my gets stuck on the htc logo and doesnt send the info. can help please
dd323 said:
but my gets stuck on the htc logo and doesnt send the info. can help please
Click to expand...
Click to collapse
Mine would do the same thing eventually I would get an error on the PC. When I finally found a RUU that matched my exact system "version-main: 3.05.651.6" It ran very smoothly. Make sure the RUU you have on matches your version number that is shown when you boot to bootloader.
dd323 said:
but my gets stuck on the htc logo and doesnt send the info. can help please
Click to expand...
Click to collapse
Mine would do the same thing eventually I would get an error on the PC. When I finally found a RUU that matched my exact system "version-main: 3.05.651.6" It ran very smoothly. Make sure the RUU you have on matches your version number that is shown when you boot to bootloader.
Brycery91 said:
Mine would do the same thing eventually I would get an error on the PC. When I finally found a RUU that matched my exact system "version-main: 3.05.651.6" It ran very smoothly. Make sure the RUU you have on matches your version number that is shown when you boot to bootloader.
Click to expand...
Click to collapse
my phone doesnt even show no numbers . my phone has no os
dd323 said:
my phone doesnt even show no numbers . my phone has no os
Click to expand...
Click to collapse
How did you get it to have no OS? If the phone is off and you first hold down the volume down button then the power button (keep them pressed till the screen lights up). Make sure that you've also had it charged.
HELP
Brycery91 said:
I Will check MD5 when I get back from work. I have all security disabled, not even firewall is enabled, I've used windows seven and I have relocked my boot loader. I was able to find an alternative version of The RUU I needed on the same thread I downloaded from. Here is the working link to the thread/download http://forum.xda-developers.com/showthread.php?t=2576995.
Click to expand...
Click to collapse
This one is not working with mine Sprint HTC ONE my HBOOT is 1.57.0000 can you plz help with this my one in S-ON ...
i need help, :/ i've the same problem
*** TEMPERED ***
*** UNLOCKED***
M7_WLS PVT SHIP S-ON RH
WBOOT-1.44.0000
RADIO-100.20.0626
OpenDsP-v31.120.274.0617
eMMC-boot
Jul 5 2013,17:19;22:-1
i try update TWRP but i cant. i have TWRP v2.6.3.0
when i try install a ROM, i get an error :/ or for example i installed TN_Sense6, when i configure my language, my HTC restarts it, again and again to beginning :c
Help help help soft brick no os no baseband
I have a sprint htc one M7 I just got my replacement phone today and i rooted it and got every thing restored on it then there was a problem with the speakers on the phone it would play music but only on the right side .....(i forgot to mention i installed renovate rom after i rooted it) so i figured if i installed another kernal it would fix it so i installed kangaroo kernal for SPRINT HTC ONE android version 4.4.2 which was the right kernal for my phone ..so i thought... so when i installed it ..it took a while for it to turn on and i knew something was wrong when it turned on the home screen wouldn't load and it was showing i had no service when i was in a area i clearly new i had service in so i tried to run a RUU and i keep getting a USB error when it tries to send the ruu . I know the cable works and when i ran fastboot getvar all there is no baseband and no os .........HELP SUPER URGENT URGENT MY parents are going to kill me cause i just got my replacment.... my hboot is 1.57 PLEASE HELP QUICK.:crying::crying::crying::crying::crying::crying:
soft bricked
I wanted to unroot my htc one m7, I tried to s-off,but on a wrong move,I wiped my phone.
now I have just bootloader and TWRP.
I tried flashing ROMs using OTG but gave me errors and didnt flash.
I dont know what should I do.
please help me.
I`m still S-ON
my getvar all:
fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.57.0000 INFOversion-baseband: 4T.29.3218.08
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 6.09.401.5 INFOversion-misc: PVT SHIP S-ON INFOserialno: HT485W9**
INFOimei: 354***
INFOmeid: 00000000000000 INFOproduct: m7ul
INFOplatform: HBOOT-8064 INFOmodelid: PN0710000
INFOcidnum: HTC_J15
INFObattery-status: good
INFObattery-voltage: 3832mV INFOpartition-layout: Generic INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader:dirty-6d8a0b9b
INFOhbootpreupdate: 11 INFOgencheckpt: 0
all: Done!
mojtabaghanidel said:
I wanted to unroot my htc one m7, I tried to s-off,but on a wrong move,I wiped my phone.
now I have just bootloader and TWRP.
I tried flashing ROMs using OTG but gave me errors and didnt flash.
I dont know what should I do.
please help me.
I`m still S-ON
my getvar all:
fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.57.0000 INFOversion-baseband: 4T.29.3218.08
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 6.09.401.5 INFOversion-misc: PVT SHIP S-ON INFOserialno: HT485W9**
INFOimei: 354***
INFOmeid: 00000000000000 INFOproduct: m7ul
INFOplatform: HBOOT-8064 INFOmodelid: PN0710000
INFOcidnum: HTC_J15
INFObattery-status: good
INFObattery-voltage: 3832mV INFOpartition-layout: Generic INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader:dirty-6d8a0b9b
INFOhbootpreupdate: 11 INFOgencheckpt: 0
all: Done!
Click to expand...
Click to collapse
what rom version have you tried to flash? What twrp version are you using? Do you want to restore your stock rom or you want to install a custom one?
reply
alray said:
what rom version have you tried to flash? What twrp version are you using? Do you want to restore your stock rom or you want to install a custom one?
Click to expand...
Click to collapse
I have flashed TWRP 2.8.1.0 (latest version)
I am S-ON
I tried to unroot my phone and firewater told me that my kernel contains anti-firewater files.
so i decieded to flash ARHD, while flashing, I wiped my phone and after that I couldnt flash any ROMs. ( ARHD and a ROM that HTC has sent for me)
I want to flash HTC sense rom and return to stock.
thanks
Hi guys,
First of all, I did read all the topics conserning to RUU, S-On/S-Off, rumrunner, moonshine, firewater, revone, and so on but I can't seem to figure out how to properly do this.
Currently the HTC is running MIUI v5 4.5.16 JB4.2. But for warranty it has to go back to the store and I want to restore it to completly stock ROM etc. without any evidence I had a custom ROM running.
What I did was, follow the steps to unlock the bootloader, flash a custom recover (TWRP v2.6.3.0) and finally root it after MIUI was flashed.
The info you guys prolly need are as followed:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.26.3263.05
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.161.11
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: .................
(bootloader) imei: ................
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: VODAP102
(bootloader) battery-status: good
(bootloader) battery-voltage: 4322mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-09ff2ded
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.038s
Click to expand...
Click to collapse
I tried to get S-Off but I keep getting strange errors on all of the given methods. This should work somehow I guess but how? Can somebody give me some kind of "roadmap" how to do it properly?
Currently fastboot shows:
*** TAMPERED ***
*** UNLOCKED ***
M7_UL PVT SHIP S-ON RH
HBOOT-1.56.0000
RADIO-4A.26.3263.05
OpenDSP-v32.120.274.0909
OS-4.19.161.11
eMMC-boot 2048MB
Mar 5 2014,15:58:33.0
Click to expand...
Click to collapse
At the moment I'm downloading "RUU_M7_UL_K44_SENSE55_MR_HTC_Europe_4.19.401.9_R_Radio_4A.23.3263.28_10.38r.1157.04L_release_353069_signed_2-1.exe". But I already noticed that if I turn S-On (fastboot oem lock) then the phone is stuck in fast boot mode...
Thanks!
I think S-off is danger may u brick ur phone, it's better to leave it
ahmed blue said:
I think S-off is danger may u brick ur phone, it's better to leave it
Click to expand...
Click to collapse
Yeah but what if I need it to go back to stock ROM?
Now it's running stock ROM but I still get "TAMPERED" and "UNLOCKED" in the bootloader. I once went into the stock recovery, and once rebooted it reset itself and everything was back factory install -again- ...?
This is the fastboot output right now after flashing Guru Reset M7 2.24.161.1.zip :
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.161.11
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: ...................
(bootloader) imei: ....................
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: VODAP102
(bootloader) battery-status: good
(bootloader) battery-voltage: 4185mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-09ff2ded
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Click to expand...
Click to collapse
The OTA update to 4.3 even fails once it reboots itself for installation. Something wrong or normal?
EDIT:
I've done "fastboot oem lock" and now it's showing (as expected) "RELOCKED".
BETA911 said:
Yeah but what if I need it to go back to stock ROM?
Now it's running stock ROM but I still get "TAMPERED" and "UNLOCKED" in the bootloader. I once went into the stock recovery, and once rebooted it reset itself and everything was back factory install -again- ...?
This is the fastboot output right now after flashing Guru Reset M7 2.24.161.1.zip :
The OTA update to 4.3 even fails once it reboots itself for installation. Something wrong or normal?
EDIT:
I've done "fastboot oem lock" and now it's showing (as expected) "RELOCKED".
Click to expand...
Click to collapse
Yup it will do, the only way to get rid of those flags tampered and unlocked / relocked is to go s-off, which strange messages are you getting whilst trying to s-off ?
I have a backup of the Vodafone Rom which you can restore through twrp, I'll send a link when I get home in a couple of hours, but it won't get rid of those flags, 401.RUU is the wrong RUU, you need 161.
---------- Post added at 05:43 PM ---------- Previous post was at 05:34 PM ----------
Ps there is no danger going s-off, as long as your flashing the correct software for your phone, the only danger is when you don't know what your doing and try to flash something wrong, it won't warn you, won't error and won't fail to flash, but at reboot it also won't come back on again.
Seanie280672 said:
Yup it will do, the only way to get rid of those flags tampered and unlocked / relocked is to go s-off, which strange messages are you getting whilst trying to s-off ?
I have a backup of the Vodafone Rom which you can restore through twrp, I'll send a link when I get home in a couple of hours, but it won't get rid of those flags, 401.RUU is the wrong RUU, you need 161.
---------- Post added at 05:43 PM ---------- Previous post was at 05:34 PM ----------
Ps there is no danger going s-off, as long as your flashing the correct software for your phone, the only danger is when you don't know what your doing and try to flash something wrong, it won't warn you, won't error and won't fail to flash, but at reboot it also won't come back on again.
Click to expand...
Click to collapse
Well... It said it had a OTA update (like before) to 4.3 and I downloaded it. Reboot, installed, reboot --> bootloop. Now it's "HTC - quietly brilliant", black screen for couple of seconds and reboot to start from HTC logo again...
It's really beginning to piss me of.
But anyway, thanks for the help! A TWRP backup of 161 would be nice, then I'll install that one. The servers at htc1guru are giving me headache, speed is only between 50 and 250 kb/sec! I tried to download more then once but they keep failing on me when they reach bigger sizes and at this speed it's really really annoying to start over again...
Does "M7 CWM Nandroid Backup CID VODAP102 1.29.161.7" work for me? I guess not because it's 1.29 and I already have a higher version so it will give me the touchscreen issues?
To be honest, if this phone finally makes it to the store for repair I hope they can't repair it and let me choose an other phone. I had multiple Android phones the past years (with sometimes more then 2-3 different roms per week) and never had any of these long stretching problems!
The problem your having with the ota sounds like whilst you were installing the guru reset file, you must select to wipe data and also install stock recovery, it will fail without stock recovery.
Well, I did select to install the stock recovery and stock radio in the aroma installer. So I'm out of clues why it's giving me so much problems...
EDIT:
I unlocked the bootloader again and flashed TWRP. I'll try with your Vodafone image once you have time to share it with me. Already big thanks for the help!
here's the backup, you will need to extract the zip file and put the folder named backup into SDCARD/TWRP/BACKUPS/"your device serial number/
https://drive.google.com/uc?export=download&confirm=5940&id=0B_nEcSZr5peRZnpMSHRPRjlzX2c
This will put you on Vodafone 4.4.2 with sense 5.5, however you cant send your phone back until you have got rid of those 2 flags in the bootloader, only way to do that is s-off.
Ignore the folder called recovery, its just TWRP recovery to flash.
After installing, download the stock recovery from the link below and flash it to get OTAs
http://d-h.st/Cyq
Hit the thanks button please.
Just finished installing it! It works so far, although it came up with a new 5.16.161.2 update right now (already has been downloaded...). What should I do?
Currently it's still in TAMPERED and UNLOCKED state with TWRP installed.
BETA911 said:
Just finished installing it! It works so far, although it came up with a new 5.16.161.2 update right now (already has been downloaded...). What should I do?
Currently it's still in TAMPERED and UNLOCKED state with TWRP installed.
Click to expand...
Click to collapse
there is no way out of this without s-off, I don't even understand why you are putting efforts on installing ota/guru reset/nandroid backup at this point.
you are on hboot 1.56 means you should try to s-off using firewater.
then you'll be able to remove the tampered flag and set the bootload back to "LOCKED" (not RE-LOCKED)
follow guide linked in my signature for going back to stock
try to s-off using firewater + arhd 31.6 rom
alray said:
there is no way out of this without s-off, I don't even understand why you are putting efforts on installing ota/guru reset/nandroid backup at this point.
you are on hboot 1.56 means you should try to s-off using firewater.
then you'll be able to remove the tampered flag and set the bootload back to "LOCKED" (not RE-LOCKED)
follow guide linked in my signature for going back to stock
try to s-off using firewater + arhd 31.6 rom
Click to expand...
Click to collapse
I know. I tried to get s-off but none of the given tools succeeded. They all complete their full cycle and eventually after the last reboot I go and check the state and it still says s-on... Then I did read I need a proper ROM so the tools can work (better). I tried to install ARHD like you mention, but after flashing it was stuck in a bootloop again. Clearing the cache and davlik didn't solve it.
At the moment I only need to know if it's safe to update to the new 5.16.161.2 update while it's unlocked... I got TWRP installed but I know I have to flash the stock recovery in order to make the update work. But I'm afraid I'm going to brick it again if I lock it again, as I don't know if it's needed to let the update complete without any errors.
Hi,
So I have used a guru reset for my Vodafone AU branded HTC One (M7) as there is no RUU for it. I have gone ahead and "relocked" the bootloader (I'm S-ON BTW), and then attempted to run OTA. All works fine until it finished installing the update after which it just goes into a boot loop. I've attempted this twice, both times wiping everything beforehand and installing stock recovery (obviously) and stock radio. Is there something else I need to do to get the OTA to work properly or is it impossible to run OTA using this guru reset.
Any help would be much appreciated.
acnak said:
Hi,
So I have used a guru reset for my Vodafone AU branded HTC One (M7) as there is no RUU for it. I have gone ahead and "relocked" the bootloader (I'm S-ON BTW), and then attempted to run OTA. All works fine until it finished installing the update after which it just goes into a boot loop. I've attempted this twice, both times wiping everything beforehand and installing stock recovery (obviously) and stock radio. Is there something else I need to do to get the OTA to work properly or is it impossible to run OTA using this guru reset.
Any help would be much appreciated.
Click to expand...
Click to collapse
we need some more info
fastboot getvar all (remove imei & serial no)
which Guru reset rom you are using ? and which OTA ?
yatindroid said:
we need some more info
fastboot getvar all (remove imei & serial no)
which Guru reset rom you are using ? and which OTA ?
Click to expand...
Click to collapse
I'm not allowed to post links, it was from htc1guru and the pathway is /dld/guru_reset_m7_2-24-980-2-zip/
It is the latest OTA available, containing Sense 5.5 and Android 4.4.2. I'm not on stock anymore so I don't know any more specifics.
This is the getvar info:
version: 0.5
version-bootloader: 1.57.0000
version-baseband: 4A.17.3250.14
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-ON
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0714000
cidnum: VODAP021
battery-status: good
battery-voltage: 3912mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-6d8a0b9b
hbootpreupdate: 11
gencheckpt: 0
acnak said:
I'm not allowed to post links, it was from htc1guru and the pathway is /dld/guru_reset_m7_2-24-980-2-zip/
It is the latest OTA available, containing Sense 5.5 and Android 4.4.2. I'm not on stock anymore so I don't know any more specifics.
This is the getvar info:
version: 0.5
version-bootloader: 1.57.0000
version-baseband: 4A.17.3250.14
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-ON
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0714000
cidnum: VODAP021
battery-status: good
battery-voltage: 3912mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-6d8a0b9b
hbootpreupdate: 11
gencheckpt: 0
Click to expand...
Click to collapse
That reset rom is very old version so after that you cant flash ota
You need more recent rom
Your version main not shows anything so see at fastboot screen any how find firmware version
Do you have Australia Vodafone ?
A member made kitkat reset rom for i will send you link for that
yatindroid said:
That reset rom is very old version so after that you cant flash ota
You need more recent rom
Your version main not shows anything so see at fastboot screen any how find firmware version
Do you have Australia Vodafone ?
A member made kitkat reset rom for i will send you link for that
Click to expand...
Click to collapse
This was the only stock ROM for Vodafone AU I can find. I originally made a nandroid backup when I first rooted the phone but that has since been accidentally deleted. If you have a more recent version of the stock Vodafone AU ROM that would be much appreciated.
version-main is the most important bit and it's blank :-/ I think older versions of TWRP or CWM had a blank version-main bug? Do you remember what was the last OTA update you took or roughly when? Otherwise, maybe update recovery and see if version-main shows up.
Australian stock unbranded nandroids should also work for you. Go check the Australian users thread for nandroid backups for almost every version (x.x.980.x).
@yatindroid I'm curious about making my own reset ROM. Got any links to info/how to?
deeevan said:
version-main is the most important bit and it's blank :-/ I think older versions of TWRP or CWM had a blank version-main bug? Do you remember what was the last OTA update you took or roughly when? Otherwise, maybe update recovery and see if version-main shows up.
Australian stock unbranded nandroids should also work for you. Go check the Australian users thread for nandroid backups for almost every version (x.x.980.x).
@yatindroid I'm curious about making my own reset ROM. Got any links to info/how to?
Click to expand...
Click to collapse
Do you have Nandroid backup ?
I have Ubuntu so its easy to open and extract nandroid backup and compression
open nandroid backup extract system and data/preload folder
Take any reset rom replace its system and data folder to your backup folders
replace boot recovery radio files from same version (extract from OTA firmware)
edit aroma config details version etc with notepad++
now zip all files and its ready nothing much require
I think @Joeisgood99 have reset rom 6.xx.980.x version
Aah pretty simple then. Yeah, I have nandroid backups. In fact I supplied the contents of the reset ROM in question in this thread. My main stumbling block was downloading a reset ROM as htc1guru was down the last couple times I thought about doing this.
deeevan said:
Aah pretty simple then. Yeah, I have nandroid backups. In fact I supplied the contents of the reset ROM in question in this thread. My main stumbling block was downloading a reset ROM as htc1guru was down the last couple times I thought about doing this.
Click to expand...
Click to collapse
ok i will send build base zip
@deeevan & @yatindroid.
I'm away from my computer until Friday so can't upload my aroma reset to stock until then.
I never uploaded it coz I haven't had a chance to test it ( deeevan understands why) as 6.11.980.12 is still the latest OTA for Optus Australia, and that's the version my reset will take you back to.
When I get home I'll post a link on the Aussie m7 thread and I'll pm the link to you as well yatindroid in case u need to pass on to others. @deeevan below is the link (go back a page or two,) where @alray walks me through how to make your own aroma reset. All u need is a RUU/OTA of what version u wanna go back to, any old aroma reset .zip and @alray s detailed instructions and your set.
http://forum.xda-developers.com/htc...ersions-stock-rom-t2994683/page4#post59335167
Have a good one guys!
yatindroid said:
ok i will send build base zip
Click to expand...
Click to collapse
Thanks! 6MB is much nicer to download than 1GB+, especially when I'm going to delete most of that anyway
yatindroid said:
That reset rom is very old version so after that you cant flash ota
You need more recent rom
Your version main not shows anything so see at fastboot screen any how find firmware version
Do you have Australia Vodafone ?
A member made kitkat reset rom for i will send you link for that
Click to expand...
Click to collapse
Sorry for resurrecting an old zombie thread, but after a few days of searching the forums and multiple flashes and resetting of my phone (HTC One m7, Australia Vodafone), this has been the thread closest to my own issue. Like OP Poster acnak, I am trying to reset my phone to stock using Guru Reset (guru_reset_m7_2-24-980-2.zip) and while it works, when it goes to install an OTA when it reboots it gets stick in a boot loop.
I have looked for a more recent reset but can't find one. Can someone point me in the direction of one, or give pointers on how to make one myself from one of the ota I have downloaded... or something equally as easy but obscure that I haven't found it yet.
Fastboot getvar all Info:
INFOversion: 0.5
INFOversion-bootloader: 1.61.0000
INFOversion-baseband: 4A.17.3250.14
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 7.21.980.22
INFOversion-misc: PVT SHIP S-ON
INFOserialno: ---
INFOimei: ---
INFOmeid: 00000000000000
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOmodelid: PN0714000
INFOcidnum: VODAP021
INFObattery-status: good
INFObattery-voltage: 4321mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-0e2a13e5
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
Cheers and thanks in advance,
Azurewren
Azurewren said:
Sorry for resurrecting an old zombie thread, but after a few days of searching the forums and multiple flashes and resetting of my phone (HTC One m7, Australia Vodafone), this has been the thread closest to my own issue. Like OP Poster acnak, I am trying to reset my phone to stock using Guru Reset (guru_reset_m7_2-24-980-2.zip) and while it works, when it goes to install an OTA when it reboots it gets stick in a boot loop.
I have looked for a more recent reset but can't find one. Can someone point me in the direction of one, or give pointers on how to make one myself from one of the ota I have downloaded... or something equally as easy but obscure that I haven't found it yet.
Fastboot getvar all Info:
INFOversion: 0.5
INFOversion-bootloader: 1.61.0000
INFOversion-baseband: 4A.17.3250.14
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 7.21.980.22
INFOversion-misc: PVT SHIP S-ON
INFOserialno: ---
INFOimei: ---
INFOmeid: 00000000000000
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOmodelid: PN0714000
INFOcidnum: VODAP021
INFObattery-status: good
INFObattery-voltage: 4321mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-0e2a13e5
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
Cheers and thanks in advance,
Azurewren
Click to expand...
Click to collapse
You can't use that guru reset rom to restore your phone, its way to old, your phone is running the 7.21.980.22 firmware so you would need a 7.21.980.2 or 7.21.980.22 guru reset rom and unfortunately there are no guru reset roms for 7.xx.xxx.x version. You can't make a guru reset rom from an ota update. ota updates are only patches, not the entire system and even if it would be possible to do it, you would have the same problem since the reset rom wouldn't match your firmware version.
Simply flash the 7.21.980.22 RUU using instructions from here
This will reset your phone back to 100% stock.
alray said:
Simply flash the 7.21.980.22 RUU using instructions from here
This will reset your phone back to 100% stock.
Click to expand...
Click to collapse
Many thanks on the link and info. I followed the instructions but got the following fail message
Code:
(bootloader) signature checking...
FAIL12 signature verify fail
FAILED (remote: 12 signature verify fail)
From my understanding this means there are issues with my bootloader version which is 1.61.0000. Is there anyway to change this, or an alternative file that corresponds with my hboot version?
Cheers
Azurewren said:
Many thanks on the link and info. I followed the instructions but got the following fail message
Code:
(bootloader) signature checking...
FAIL12 signature verify fail
FAILED (remote: 12 signature verify fail)
From my understanding this means there are issues with my bootloader version which is 1.61.0000. Is there anyway to change this, or an alternative file that corresponds with my hboot version?
Cheers
Click to expand...
Click to collapse
Is your bootloader still unlocked? It smust locked or relocked to flash the RUU.
alray said:
Is your bootloader still unlocked? It smust locked or relocked to flash the RUU.
Click to expand...
Click to collapse
Nope, it is relocked as per the instructions. The bootloader screen is as follows:
Code:
[COLOR="Black"]*** TAMPERED ***[/COLOR]
[COLOR="Magenta"]*** RELOCKED ***[/COLOR]
[COLOR="DarkGreen"]M7_UL PVT SHIP S-ON RH
HBOOT-1.61.0000
RADIO-4A.17.3250.14
OpenDSP-v35.120.274.0718
OS-7.21.980.22
eMMC-boot 2048MB
May 13 2015,01:15:11.27025[/COLOR]
Azurewren said:
Nope, it is relocked as per the instructions. The bootloader screen is as follows:
Code:
[COLOR="Black"]*** TAMPERED ***[/COLOR]
[COLOR="Magenta"]*** RELOCKED ***[/COLOR]
[COLOR="DarkGreen"]M7_UL PVT SHIP S-ON RH
HBOOT-1.61.0000
RADIO-4A.17.3250.14
OpenDSP-v35.120.274.0718
OS-7.21.980.22
eMMC-boot 2048MB
May 13 2015,01:15:11.27025[/COLOR]
Click to expand...
Click to collapse
Your phone was in booted in ruu mode (not in bootloader) when trying to flash the file (black screen with silver htc logo)?
alray said:
Your phone was in booted in ruu mode (not in bootloader) when trying to flash the file (black screen with silver htc logo)?
Click to expand...
Click to collapse
Yep, I followed the instructions you linked for me.
Azurewren said:
Yep, I followed the instructions you linked for me.
Click to expand...
Click to collapse
Can you confirm if the md5 value of your file is 23ed1efd43cda3a5a1a6363ee73ca9b4
You can download the required tool here: http://www.winmd5.com/
alray said:
Can you confirm if the md5 value of your file is 23ed1efd43cda3a5a1a6363ee73ca9b4
You can download the required tool here: http://www.winmd5.com/
Click to expand...
Click to collapse
Okay. Downloaded and verified. The file I am using has the same md5 value as what you commented up above.