Related
Hi,
I was just installing the CM 10.1 ROM and I received the error "Unfortunately, the process com.android.phone has stopped". After this, I tried to reinstall the stock boot.img I got from Android Revolution and I seem to have lost everything on the phone. When connected via USB, the phone folders are normally shown, but now they aren't. As well, when trying to boot, I get stuck at the HTC logo screen. I tried fastboot flash boot boot.img but I keep receiving the error that the device can't be detected and/or the partition "boot.img" can't be found. I did cd c:\Root (my rooting folder) beforehand and boot.img is in there. How do I factory reset as in reinstall original OS with HTC Sense 5 UI on it so that everything went back to when I took it out of the box? If there's a way to do it via TWRP which I have installed, I would love to know how.
JacksonS918 said:
Hi,
I was just installing the CM 10.1 ROM and I received the error "Unfortunately, the process com.android.phone has stopped". After this, I tried to reinstall the stock boot.img I got from Android Revolution and I seem to have lost everything on the phone. When connected via USB, the phone folders are normally shown, but now they aren't. As well, when trying to boot, I get stuck at the HTC logo screen. I tried fastboot flash boot boot.img but I keep receiving the error that the device can't be detected and/or the partition "boot.img" can't be found. I did cd c:\Root (my rooting folder) beforehand and boot.img is in there. How do I factory reset as in reinstall original OS with HTC Sense 5 UI on it so that everything went back to when I took it out of the box? If there's a way to do it via TWRP which I have installed, I would love to know how.
Click to expand...
Click to collapse
if you get the ruu.zip for you device your can use all in one toolkit to flash it
skinsfanbdh said:
if you get the ruu.zip for you device your can use all in one toolkit to flash it
Click to expand...
Click to collapse
The problem is there is no ruu for AT&T
JacksonS918 said:
The problem is there is no ruu for AT&T
Click to expand...
Click to collapse
can you get to bootloader?
skinsfanbdh said:
can you get to bootloader?
Click to expand...
Click to collapse
Yes and I can get into recovery and start the boot, but I get stuck at the load screen. How do I flash the T-Mobile ruu.zip? (Pretty much the same as AT&T)
JacksonS918 said:
Yes and I can get into recovery and start the boot, but I get stuck at the load screen. How do I flash the T-Mobile ruu.zip? (Pretty much the same as AT&T)
Click to expand...
Click to collapse
what are you trying to flash?
skinsfanbdh said:
what are you trying to flash?
Click to expand...
Click to collapse
m7ul-jb-crc-3.4.10-24b0b2a.tar.gz is the file name of the file I downloaded from the Dev site.
JacksonS918 said:
m7ul-jb-crc-3.4.10-24b0b2a.tar.gz is the file name of the file I downloaded from the Dev site.
Click to expand...
Click to collapse
i dont think you can flash that type of file. download a rom that is in zip format then flash it or you might be able to use all in one toolkit to push the file u you have to the phone.
but i recommend getting a zip file that is proven to work for you device
skinsfanbdh said:
i dont think you can flash that type of file. download a rom that is in zip format then flash it or you might be able to use all in one toolkit to push the file u you have to the phone.
but i recommend getting a zip file that is proven to work for you device
Click to expand...
Click to collapse
Where would I go to get said zip file?
JacksonS918 said:
Where would I go to get said zip file?
Click to expand...
Click to collapse
the development section. i believe the most popular one for your device is cleanROM
skinsfanbdh said:
the development section. i believe the most popular one for your device is cleanROM
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2224752 <- I tried installing the odexed .zip but it isn't loading.
JacksonS918 said:
http://forum.xda-developers.com/showthread.php?t=2224752 <- I tried installing the odexed .zip but it isn't loading.
Click to expand...
Click to collapse
whats it doing exactly
skinsfanbdh said:
whats it doing exactly
Click to expand...
Click to collapse
It's stuck at the HTC quietly brilliant screen. When hooked up to my PC, the device shows that it's completely empty and has no OS. The phone will not boot at all.
what are you trying to flash from recovery
skinsfanbdh said:
what are you trying to flash from recovery
Click to expand...
Click to collapse
The T-Mobile RUU Kit supplied from the dev site.
JacksonS918 said:
The T-Mobile RUU Kit supplied from the dev site.
Click to expand...
Click to collapse
im not sure but i dont think you can flash those. i think you may have to use adb and push the rom to the phone
Hi there.
So I wanted to install cyanogenmod on my htc incredible s. So i rooted my phone without big problems. Then I tried to install cyanogenmod through 4ext recovery via zip file. And now all I have is a static white screen. I tried over 10 ruu's that supposed to be installed from pc and phone. I tried another recovery, custom OS, hard reset through recovery and bootloader, goldcard and some other things that I cant even remember. I also tried to lock bootloader, unlock it, reset root etc.
android version before brick was 4.0.4, sense 3.6.
vivo s-on
hboot 2.02.0002
radio 3831.18.00.11_M
Also when i install cm or some other custom OS through 4ext zip install it says OK but when i reload nothing changes.
Help?
Killa_vatt said:
Hi there.
So I wanted to install cyanogenmod on my htc incredible s. So i rooted my phone without big problems. Then I tried to install cyanogenmod through 4ext recovery via zip file. And now all I have is a static white screen. I tried over 10 ruu's that supposed to be installed from pc and phone. I tried another recovery, custom OS, hard reset through recovery and bootloader, goldcard and some other things that I cant even remember. I also tried to lock bootloader, unlock it, reset root etc.
android version before brick was 4.0.4, sense 3.6.
vivo s-on
hboot 2.02.0002
radio 3831.18.00.11_M
Also when i install cm or some other custom OS through 4ext zip install it says OK but when i reload nothing changes.
Help?
Click to expand...
Click to collapse
With an unlocked bootloader 2.02.0002, you need to extract the boot.img from the CM ROM's zip.file and manually flash it in FASTBOOT USB mode.
You cannot simply flash a custom ROM from 4EXT recovery when you only have an unlocked bootloader. There are plenty of sticky threads in this forum that document the procedure you need to follow. You need to read, study and understand before you try modding your phone.
tpbklake said:
With an unlocked bootloader 2.02.0002, you need to extract the boot.img from the CM ROM's zip.file and manually flash it in FASTBOOT USB mode.
You cannot simply flash a custom ROM from 4EXT recovery when you only have an unlocked bootloader. There are plenty of sticky threads in this forum that document the procedure you need to follow. You need to read, study and understand before you try modding your phone.
Click to expand...
Click to collapse
Still stuck at HTC boot screen. Maybe bad cm file?
I readed many guides on tons of sites but all of them says different things =\
Killa_vatt said:
Still stuck at HTC boot screen. Maybe bad cm file?
I readed many guides on tons of sites but all of them says different things =\
Click to expand...
Click to collapse
if the cm.zip is bad; recovery itself tells BAD ZIP
BTW why dont you flash another rom??
there are much better roms than CM!!
try it!!
so that we will know whether the problem is in phone or rom that you are flashing???
prunzzz said:
if the cm.zip is bad; recovery itself tells BAD ZIP
BTW why dont you flash another rom??
there are much better roms than CM!!
try it!!
so that we will know whether the problem is in phone or rom that you are flashing???
Click to expand...
Click to collapse
I have already tried many ways to install many other roms. What will you recommend?
Killa_vatt said:
I have already tried many ways to install many other roms. What will you recommend?
Click to expand...
Click to collapse
what kind of errors did you get when you flashed other roms??
prunzzz said:
what kind of errors did you get when you flashed other roms??
Click to expand...
Click to collapse
If I am flashing from exe file through fastboot I get ERROR [131]: CUSTOMER ID ERROR.
If I use fastboot flash boot boot.img I get no errors but it still stucks on HTC screen.
If I flash using 4ext install zip mode I still get no errors but it stucks.
I also got error that I dont have boot.prop in my system.
I cant remember other errors that I had.
Killa_vatt said:
If I am flashing from exe file through fastboot I get ERROR [131]: CUSTOMER ID ERROR.
If I use fastboot flash boot boot.img I get no errors but it still stucks on HTC screen.
If I flash using 4ext install zip mode I still get no errors but it stucks.
I also got error that I dont have boot.prop in my system.
I cant remember other errors that I had.
Click to expand...
Click to collapse
have you tried flashing through HBOOT??
prunzzz said:
have you tried flashing through HBOOT??
Click to expand...
Click to collapse
That is done by renaming a file to PG98***?
Killa_vatt said:
If I am flashing from exe file through fastboot I get ERROR [131]: CUSTOMER ID ERROR.
If I use fastboot flash boot boot.img I get no errors but it still stucks on HTC screen.
If I flash using 4ext install zip mode I still get no errors but it stucks.
I also got error that I dont have boot.prop in my system.
I cant remember other errors that I had.
Click to expand...
Click to collapse
The ERROR 131 means that you are trying to flash an official RUU for a different carrier/region. You need to create a goldcard in order to successfully flash a RUU.
Why don't you try flashing a custom ROM from recovery and then flash the boot.img file.
tpbklake said:
The ERROR 131 means that you are trying to flash an official RUU for a different carrier/region. You need to create a goldcard in order to successfully flash a RUU.
Why don't you try flashing a custom ROM from recovery and then flash the boot.img file.
Click to expand...
Click to collapse
Ive created a goldcard.
I tried to flash a custom rom-still stuck at whitescreen.
Killa_vatt said:
Ive created a goldcard.
I tried to flash a custom rom-still stuck at whitescreen.
Click to expand...
Click to collapse
OK, after re-reading your posts, here are some additional tips:
When flashing a custom ROM from 4EXT, please make sure you do a full system wipe and then clear both Cache and Dalvik cache before you flash the ROM.
After you flash the ROM, then you need to immediately flash the ROM's boot.img file contained in the zip file using FASTBOOT USB mode.
As for trying to flash 10 different RUU's there ERROR 131 indicates that you have a bad goldcard.
Killa_vatt said:
That is done by renaming a file to PG98***?
Click to expand...
Click to collapse
Hey not PG98!!!!
PG32IMG.zip!!!!!
Try it now
Also consider what tpbklake said
HIT THANKS IF I HELPED YOU
tpbklake said:
When flashing a custom ROM from 4EXT, please make sure you do a full system wipe and then clear both Cache and Dalvik cache before you flash the ROM.
After you flash the ROM, then you need to immediately flash the ROM's boot.img file contained in the zip file using FASTBOOT USB mode.
Click to expand...
Click to collapse
prunzzz said:
Hey not PG98!!!!
PG32IMG.zip!!!!!
Try it now
Click to expand...
Click to collapse
I mean PG32IMG,forgot that.
I fully wiped everything.
I did not flashed rom's boot.img,thanks! Gonna try it later.
tpbklake said:
After you flash the ROM, then you need to immediately flash the ROM's boot.img file contained in the zip file using FASTBOOT USB mode.
Click to expand...
Click to collapse
Thank you very much! I feel dummy now =)
Flashing rom's boot.img fixed all problems. Most of roms works now. Thanked everyone in topic.
I am using ATT htc one with developer edition OS. And I learned from the forum there was new radio released be att. So I tried to flash it.
However, since I want OTA work, I chose to stay with the stock recovery and therefore I cannot flash it via custom recovery like a lot of threads in here talking about. I searched and only found the procedure from other htc product's forum as below.
1) adb reboot-bootloader
2) fastboot flash radio radio.img
But "fastboot flash radio radio.img" has no response at all.
I got the img from http://forum.xda-developers.com/showthread.php?t=232556. It was extracted from Radio_4A.16.3250.24_10.38.1150.03.zip.
My current build is 1.29.1540.17, while baseband is still 4A.14.3250.13, which is the original. And Ive already s-offed and unlocked bootloader.
Any help about flashing? Thanks in advance.
lowirve said:
I am using ATT htc one with developer edition OS. And I learned from the forum there was new radio released be att. So I tried to flash it.
However, since I want OTA work, I chose to stay with the stock recovery and therefore I cannot flash it via custom recovery like a lot of threads in here talking about. I searched and only found the procedure from other htc product's forum as below.
1) adb reboot-bootloader
2) fastboot flash radio radio.img
But "fastboot flash radio radio.img" has no response at all.
I got the img from http://forum.xda-developers.com/showthread.php?t=232556. It was extracted from Radio_4A.16.3250.24_10.38.1150.03.zip.
My current build is 1.29.1540.17, while baseband is still 4A.14.3250.13, which is the original. And Ive already s-offed and unlocked bootloader.
Any help about flashing? Thanks in advance.
Click to expand...
Click to collapse
Did you try the fastboot flash command in RUU mode? Fastboot oem reboot RUU. This is just a guess on my part, but that's the mode for firmware flashing, so guessing it might work for the radio too.
In order for a radio to be flashed in fastboot it has to be packaged in a zip file that rubootRUU mode understands. It's easier for most people to just flash in recovery
gunnyman said:
In order for a radio to be flashed in fastboot it has to be packaged in a zip file that rubootRUU mode understands. It's easier for most people to just flash in recovery
Click to expand...
Click to collapse
Thanks, gunny. I had an idea that was how it worked, I appreciate the knowledge! Is the OP out of luck then? Is there any way for him to flash a radio if he's on stock recovery?
It's easy enough to flash custom recovery then radio then put stock recovery back on.
gunnyman said:
It's easy enough to flash custom recovery then radio then put stock recovery back on.
Click to expand...
Click to collapse
Oh, so like the normal way the rest of us did it lol! Thanks, gunny!
Thank you all. Looks like the only choice for me now is stop being lazy and use custom recovery, then flash it back to stock.
In the first place, I thought there was an easy method to use fastboot like other htc products.
gunnyman said:
In order for a radio to be flashed in fastboot it has to be packaged in a zip file that rubootRUU mode understands. It's easier for most people to just flash in recovery
Click to expand...
Click to collapse
So I guess the zip file I got was prepared for recovery use only, right? I have been comparing it with firmware zip file found in RUU flashing thread (http://forum.xda-developers.com/showthread.php?t=2365506&highlight=flash+latest+radio+fastboot). RUU flash's file includes android-info.txt to enable fastboot read the image inside zip file.
lowirve said:
So I guess the zip file I got was prepared for recovery use only, right? I have been comparing it with firmware zip file found in RUU flashing thread (http://forum.xda-developers.com/showthread.php?t=2365506&highlight=flash+latest+radio+fastboot). RUU flash's file includes android-info.txt to enable fastboot read the image inside zip file.
Click to expand...
Click to collapse
I forgot about this file that was posted in AT&T Developer Forum, it's a packaged firmware file with only radio updates. The post also contains the latest firmware that includes newest touch driver. Newest touch driver doesn't work with 4.1.2 ROMs and older recoveries.
http://forum.xda-developers.com/showthread.php?p=44260480
Sent from my HTC One using xda app-developers app
ilal2ielli said:
I forgot about this file that was posted in AT&T Developer Forum, it's a packaged firmware file with only radio updates. The post also contains the latest firmware that includes newest touch driver. Newest touch driver doesn't work with 4.1.2 ROMs and older recoveries.
http://forum.xda-developers.com/showthread.php?p=44260480
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
Thanks for the finding:good:. I haven't read it before.
My Sprint HTC One was working fine until i flashed the latest AOKP build and a kernel that must not have worked. The phone started rebooting and wouldn't stay in the system for longer than a minute. I decided to wipe everything, even internal storage so that I could adb push another rom onto it and install. I did this before but for some reason this time it didn't. My computer recognized when I'm in adb or fastboot but when I try to push a rom from adb or flash a rom from fastboot it says it can't mount data, cache, system, blah blah blah... I know I'm a noob at this rooting stuff with HTC but please could someone help me? I also tried RUU but my image version was higher then the RUU image version so that wasn't an option as my image version is 1.31.651.2 and the latest image version for RUU is 1.29.651.10. I don't have s-off and I am not able to obtain it because I have no OS and it can't mount. Can someone PLEASE HELP ME?
You can get into twrp..... try re installing the htc drivers or generic Android drivers. perhaps maybe installing the drivers on a different pc and or using a live ubuntuu disk and pushing the files over to twrp.
Robisgnarly said:
You can get into twrp..... try re installing the htc drivers or generic Android drivers. perhaps maybe installing the drivers on a different pc and or using a live ubuntuu disk and pushing the files over to twrp.
Click to expand...
Click to collapse
i dont have a problem running adb or fastboot. all my drivers are installed. its just that when i try to push them or flash anything i get errors because nothing is mounted so it has no place to store the files i guess?
nwajr5 said:
My Sprint HTC One was working fine until i flashed the latest AOKP build and a kernel that must not have worked. The phone started rebooting and wouldn't stay in the system for longer than a minute. I decided to wipe everything, even internal storage so that I could adb push another rom onto it and install. I did this before but for some reason this time it didn't. My computer recognized when I'm in adb or fastboot but when I try to push a rom from adb or flash a rom from fastboot it says it can't mount data, cache, system, blah blah blah... I know I'm a noob at this rooting stuff with HTC but please could someone help me? I also tried RUU but my image version was higher then the RUU image version so that wasn't an option as my image version is 1.31.651.2 and the latest image version for RUU is 1.29.651.10. I don't have s-off and I am not able to obtain it because I have no OS and it can't mount. Can someone PLEASE HELP ME?
Click to expand...
Click to collapse
Your internal memory is corrupt. Flash a different version of TWRP. It should fix the errors. You will then be able to mount everything.
indy1811 said:
Your internal memory is corrupt. Flash a different version of TWRP. It should fix the errors. You will then be able to mount everything.
Click to expand...
Click to collapse
what version of twrp should i flash?
nwajr5 said:
what version of twrp should i flash?
Click to expand...
Click to collapse
the newest version?
Robisgnarly said:
the newest version?
Click to expand...
Click to collapse
i already had the latest on it
This will get you fixed up
http://forum.xda-developers.com/showthread.php?t=2461414
bigdaddy619 said:
This will get you fixed up
http://forum.xda-developers.com/showthread.php?t=2461414
Click to expand...
Click to collapse
thanks ill try it and let you know
adb reboot recovery.
In TWRP go to Advanced > ADB Sideload
abd sideload rom.zip
Last resort would be the flash the stock RUU and then reroot. I did that and fixed everything
Sent from my HTCONE using Tapatalk
aman1127 said:
Last resort would be the flash the stock RUU and then reroot. I did that and fixed everything
Sent from my HTCONE using Tapatalk
Click to expand...
Click to collapse
easier done than said. i am on image version of 1.31 and the ruu is 1.29 so there is no way. even when i tried this http://forum.xda-developers.com/showthread.php?t=2390821 the ruu gave me an error
bigdaddy619 said:
This will get you fixed up
http://forum.xda-developers.com/showthread.php?t=2461414
Click to expand...
Click to collapse
oh i forgot to mention im on hboot 1.55 because my friend that tried to help me updated it like a dummy
nwajr5 said:
what version of twrp should i flash?
Click to expand...
Click to collapse
Any version other than the one you're on. I downgraded from 2.6.3.0 to 2.5 and it fixed the problem for me...
Hi all, I just tried to update my firmware to remove the red text on the boot screen and now I can't get any further than the boot screen.
I can still get in to the bootloader but it won't go any further than the boot splash.
Could someone help please??
Cheers all.
Seems rom isn't installed.
Which rom did you have?
And, you can boot in recovery?
Guich said:
Seems rom isn't installed.
Which rom did you have?
And, you can boot in recovery?
Click to expand...
Click to collapse
Thanks. Yeah I had Viperom 2.7.
And yeah I can get in to TWRP no problems
happysteveo said:
Thanks. Yeah I had Viperom 2.7.
And yeah I can get in to TWRP no problems
Click to expand...
Click to collapse
So reflash the rom without any wipe
And which firmware you've installed?
Guich said:
So reflash the rom without any wipe
And which firmware you've installed?
Click to expand...
Click to collapse
Thanks. I tried to flash the rom in adb but it said
writing zip...
then
failed <remote: not allowed>
Do you know what I can do next?
It was this firmware: 14.06.2013 Update: added 1.54.0000 from Base 2.17 Modified - red warning removed.
happysteveo said:
Thanks. I tried to flash the rom in adb but it said
writing zip...
then
failed <remote: not allowed>
Do you know what I can do next?
It was this firmware: 14.06.2013 Update: added 1.54.0000 from Base 2.17 Modified - red warning removed.
Click to expand...
Click to collapse
Oh, you flashed only the hboot patched and rom won't boot...
I mean you have to flash the rom from recovery
Guich said:
Oh, you flashed only the hboot patched and rom won't boot...
I mean you have to flash the rom from recovery
Click to expand...
Click to collapse
How do I do that? When I am in recovery and I select restore, there is nothing there.
I have a backup saved but it doesn't seem to be showing up.
i take it you've got s-off,goto htc1guru.com,look for ruu zip for flashing via fastboot,it will reset your phone to fully stock,guides on how to do it are on the site also
Sent from my S-Off 801n M7_UL
steelmaggot said:
i take it you've got s-off,goto htc1guru.com,look for ruu zip for flashing via fastboot,it will reset your phone to fully stock,guides on how to do it are on the site also
Sent from my S-Off 801n M7_UL
Click to expand...
Click to collapse
Okay, is there no way of getting a viperone zip file from my pc to install on to the phone?
You need to sideload the rom via adb. Then you'll be able to flash it from recovery.
Sent from my HTC One using Tapatalk
Evil-Dragon said:
You need to sideload the rom via adb. Then you'll be able to flash it from recovery.
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
Thanks, have tried but it can't find the file when I type the command in cmd.and it says that there is no such file or directory. I think I may have to go down the RUU route.