Hello everyone!
I`m new here.And I meet a very troublesome(just for me) problem.I hope there`ll be someone could solve it.thanks first.
(Because English is not my mother language,my some words maybe are difficult to understand.but I`ll gald if someone could correct my grammer error)
At first,I introduce my phone.It`s Galaxy S advance(that means I went into the right place to ask question).
My phone`baseband is XXLD1(Android version 2.3.6) when I get it about two years ago.Then I upgraded it to XXLQB(Android version 4.1.2).
But a few days later,I realize that European version ROM could flash Asia version offical ROM.So I flash Samsung-GT-I9070-XTE-I9070DXAMD1-1365494217(Because it has Chinese language).
when it want to flash CHN-I9070ZCLPC-20130812164209 into my device.Here problems come.
I got this idea at (sorry i can`t put a link without permission) . I get my phone into downing mode.flash CHN-I9070ZCLPC-20130812164209(just a PDA , no pit csc and so on).I failed to flash in. The error infomation that odin give me is <ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9070ZCLPC_I9070CHNLPC_I9070ZCLPC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> cache.img.md5
<ID:0/003> NAND Write Start!!
<ID:0/003> hidden.img.md5
<ID:0/003> kernel.bin.md5
<ID:0/003> kernel2.bin.md5
<ID:0/003> mem_init.bin.md5
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
so i decided to downgrade from 4.1.2 to 2.3.6(official DXLD1) .Successed smoothly.now i`m 2.3.6 official rom with baseband named DXLD1.
than i flash CHN-I9070ZCLPC-20130812164209(PDA) with 16G pit . this time i Successed.but when i odin say RESET.it was in RESET a long time. so i close odin.pull out the USB.
NOW i can`t light my phone with many ways.Such as HOME+VOL.DOWN+POWER and 301K.i also can`t get into recovery mode. when i Plug it in the power . it has no reaction. what should i do to save my Galaxy S Advance ?
1. Where are you from?
2. What 4.1.2 version did you download? Please post a link here!
3. Try: Press Volume down, Home button, Power button ... Any reaction? Did you get into Download mode?
If you didn't get into Download mode then you have a problem, your device is Hard-Bricked ... That means the only thing which can safe it is to give it to the shop where you bought it, hopefully you have still warranty ... Simply tell them your device didn't start anymore and perhaps you get a new one ... - I read already it is 2 years old ... so that is a big problem ...
If you didn't buy your phone in China or in completely Asia it was a big mistake to flash a Chinese version!!!
Flo0008 said:
1. Where are you from?
2. What 4.1.2 version did you download? Please post a link here!
3. Try: Press Volume down, Home button, Power button ... Any reaction? Did you get into Download mode?
If you didn't get into Download mode then you have a problem, your device is Hard-Bricked ... That means the only thing which can safe it is to give it to the shop where you bought it, hopefully you have still warranty ... Simply tell them your device didn't start anymore and perhaps you get a new one ... - I read already it is 2 years old ... so that is a big problem ...
If you didn't buy your phone in China or in completely Asia it was a big mistake to flash a Chinese version!!!
Click to expand...
Click to collapse
1.I`m from China.
2.Because I have no permission,I can`t post a link.
3.when I press that 3 buttons,I get nothing. No any reaction......I can`t get into Download mode..
I`ll post the link that I downloaded from when I get the premission.
So,I get a Hard-bricked now ? Are there some ways I can try to save my phone?
Flo0008 said:
1. Where are you from?
2. What 4.1.2 version did you download? Please post a link here!
3. Try: Press Volume down, Home button, Power button ... Any reaction? Did you get into Download mode?
If you didn't get into Download mode then you have a problem, your device is Hard-Bricked ... That means the only thing which can safe it is to give it to the shop where you bought it, hopefully you have still warranty ... Simply tell them your device didn't start anymore and perhaps you get a new one ... - I read already it is 2 years old ... so that is a big problem ...
If you didn't buy your phone in China or in completely Asia it was a big mistake to flash a Chinese version!!!
Click to expand...
Click to collapse
http://pan.baidu.com/s/1o6nxPgA This the Chinese version that I downloaded.
AceVincent said:
http://pan.baidu.com/s/1o6nxPgA This the Chinese version that I downloaded.
Click to expand...
Click to collapse
Flo0008 said:
1. Where are you from?
2. What 4.1.2 version did you download? Please post a link here!
3. Try: Press Volume down, Home button, Power button ... Any reaction? Did you get into Download mode?
If you didn't get into Download mode then you have a problem, your device is Hard-Bricked ... That means the only thing which can safe it is to give it to the shop where you bought it, hopefully you have still warranty ... Simply tell them your device didn't start anymore and perhaps you get a new one ... - I read already it is 2 years old ... so that is a big problem ...
If you didn't buy your phone in China or in completely Asia it was a big mistake to flash a Chinese version!!!
Click to expand...
Click to collapse
I bought it on a on-line shop in China.It seems that it`s not a chinese version.Its baseband is XXLD1
If your phone doesnt show any reaction, try to put out your battery for 20 minutes, put it in your phone back, connect it to the charger, wait 1 hour and try to get into Download Mode again ... I think the worst case happened for you, a Hard Brick. This happened because of disconnecting your phone during installing Stock rom with Odin ... Keep me up to date
Flo0008 said:
If your phone doesnt show any reaction, try to put out your battery for 20 minutes, put it in your phone back, connect it to the charger, wait 1 hour and try to get into Download Mode again ... I think the worst case happened for you, a Hard Brick. This happened because of disconnecting your phone during installing Stock rom with Odin ... Keep me up to date
Click to expand...
Click to collapse
I did it,but no any reaction. what should i do?
AceVincent said:
I did it,but no any reaction. what should i do?
Click to expand...
Click to collapse
Go to the shop where you buyed it and tell them you were just listening music or something on your phone and suddenly he shut down and you could never turn him back on.
working on it...
Hi,
I'm working on an unbrick procedure (http://forum.xda-developers.com/showthread.php?t=2701363) without JTAG or any box.
Results look promising but I have very few time to work on it.
But I think I'm close to it...
I have gained a good understanding of the boot and flashing procedure using the flashkit tool (on which the Snowball open source riff tool is based on).
We have all the pieces (including certificates). We "just" have to assemble the correct bootloader including the recovery software and boot it from USB using flashkit.
-> If someone with good linux/Android compiling knownledge helps me it might be fast.
If not, just wait that I manage to do it... or give up and go to a shop with a Riffbox, Z3x, Octopus or whatever it is called to recover the phone" the hard way"
flentus said:
Hi,
I'm working on an unbrick procedure (http://forum.xda-developers.com/showthread.php?t=2701363) without JTAG or any box.
Results look promising but I have very few time to work on it.
But I think I'm close to it...
I have gained a good understanding of the boot and flashing procedure using the flashkit tool (on which the Snowball open source riff tool is based on).
We have all the pieces (including certificates). We "just" have to assemble the correct bootloader including the recovery software and boot it from USB using flashkit.
-> If someone with good linux/Android compiling knownledge helps me it might be fast.
If not, just wait that I manage to do it... or give up and go to a shop with a Riffbox, Z3x, Octopus or whatever it is called to recover the phone" the hard way"
Click to expand...
Click to collapse
YEAH!You`re very helpful.but i can`t help you. sorry, looking forward your amzing result.
@AceVincent
There is a chance to unbrick your phone with a tool called USB JIG:
http://www.amazon.de/s?ie=UTF8&x=0&...n-yt-21&linkCode=ur2&camp=1638&creative=19454
It may help, but perhaps not ... if you bought it you can safe your hard bricked phone in this way:
Instruction:
1. Put out the battery
2. Wait for 2 minutes
3. Plug in the USB JIG
4. Now put the battery back into your phone
Now your phone should boot into the Download Mode, like mentioned above, it should ...
If it worked for you it solves other things too: It makes the yellow triangle to disappear and it sets the Binary counter back to zero ...
I never tested it until now because I didn't break my phone so far, but this will be the one of the last opportunities to revive your phone ... But I can't guarantee anything ...
Flo0008 said:
@AceVincent
There is a chance to unbrick your phone with a tool called USB JIG:
http://www.amazon.de/s?ie=UTF8&x=0&...n-yt-21&linkCode=ur2&camp=1638&creative=19454
It may help, but perhaps not ... if you bought it you can safe your hard bricked phone in this way:
Instruction:
1. Put out the battery
2. Wait for 2 minutes
3. Plug in the USB JIG
4. Now put the battery back into your phone
Now your phone should boot into the Download Mode, like mentioned above, it should ...
If it worked for you it solves other things too: It makes the yellow triangle to disappear and it sets the Binary counter back to zero ...
I never tested it until now because I didn't break my phone so far, but this will be the one of the last opportunities to revive your phone ... But I can't guarantee anything ...
Click to expand...
Click to collapse
If there is a bootloader for I9070.I wanna it to test my way to save my phone @Flo0008 @shut_down
Related
Beat with me guys, I am very very new to this board, and I apologize if I post this in the wrong area.
Lemme start from scratch.
My phone is not rooted or anything like that. BUT I wanted to update my software for the Captivate to 2.2 using samsung Kies.
Not sure what happened, I though I had the correct drivers installed and what not, but it gave me the screen with the phone, exlamation mark, and computer.
I can put my phone into download mode, and I installed odin3 one click downloader. The problem is, when it gets to the part 'file analysis' it gets stuck there.
I watched a video on youtube and his went automatically, so I'm not sure at ALL what to do. If I can fix this myself, I'd love to. If not, I will go through AT&T and see if I can get it replaced.
Any help would be greatly appreciated.
Not sure how to fix it, but if you have to send it into samsung say it got screwed up somehow while trying to update to KB1, in truth that is what happened, plus if you say that they will try to fix it fast
If you have access to another computer, download ODIN and try it on that one. Odin works on my laptop but not on my desktop.
CM7 Inspire 4G
What you have is a soft brick. Keep trying to get into download (try both 2 and 3 button methods) and then retry Odin. Look in Dev subforum for the "How to flash a ROM" sticky as there is good info on how to do this.
Samsung was absolutely no help lol.
Well.. I guess I can try this on another desktop.
Jeez I regret trying to upgrade man. Shoulda waited and learned more.
Has anyone had odin3 get stuck at file analysis before?
What model is your Cappy? You can find the model number underneath the battery (on the phone itself). It should have a number like 1006,1007,1008,1009,1010,etc.
Also, it'll be a good idea to try this alternate method in the mean time:
Make sure you know how to go to Download Mode, and that you have the drivers installed properly.
Windows 64bit
Windows 32bit
This is the manual (or "full") Odin, it's taken from a post by icezar1 in the Development Forum:
Do not use this if you want to send your phone back to ATT or Samsung for warranty!
Do not use this if you know you flashed a -LOW- ODIN package (when opening the PDA***.tar or CODE***.tar you will find inside boot.bin or sbl.bin)
Use this if you want to go back to stock before flashing a custom ROM.
Use this without worries if you changed your boot screen image or if you flashed the secondary boot loader which allows you to enter download/recovery with key combos.
Download the package from here
How to:
Remove sdcard and SIM card from the phone
Extract JF6_secure.zip somewhere.
Boot your phone in Download Mode
Run Odin3 v1.3.exe
Plug in your phone via USB
Click on the button PDA
Choose JF6_secure.tar.md5
Click start
Wait and do not unplug cable until it is finished
venomio said:
What model is your Cappy? You can find the model number underneath the battery (on the phone itself). It should have a number like 1006,1007,1008,1009,1010,etc.
Click to expand...
Click to collapse
Just for clarity sake, those are not the model numbers, they are build date (first two are year, second two are month). The model number of the Captivate is i896 or i897.
I know, I keep saying that they're model number though for some reason. Thanks anyway I guess.
Thank you venomio this 1.3 is working much better.
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> Enter CS for MD5..
<ID:0/003> Check MD5.. Do not unplug the cable..
<ID:0/003> Please wait..
<ID:0/003> Checking MD5 finished Sucessfully..
<ID:0/003> Leave CS..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
That's where I'm at right now. Fingers crossed!!
aftermaz said:
Beat with me guys, I am very very new to this board, and I apologize if I post this in the wrong area.
Lemme start from scratch.
My phone is not rooted or anything like that. BUT I wanted to update my software for the Captivate to 2.2 using samsung Kies.
Not sure what happened, I though I had the correct drivers installed and what not, but it gave me the screen with the phone, exlamation mark, and computer.
I can put my phone into download mode, and I installed odin3 one click downloader. The problem is, when it gets to the part 'file analysis' it gets stuck there.
I watched a video on youtube and his went automatically, so I'm not sure at ALL what to do. If I can fix this myself, I'd love to. If not, I will go through AT&T and see if I can get it replaced.
Any help would be greatly appreciated.
Click to expand...
Click to collapse
I'm in the same exact situation as the OP. I'll try the instructions posted below and report my findings.
check your build number first before you flash using odin. certain build may not work with odin one-click.
an usb jig will help you out if you cannot get into the download mode or just in case:
http://cgi.ebay.com/ws/eBayISAPI.dl...84198&ssPageName=STRK:MESELX:IT#ht_782wt_1139
Good Day All :
I started up with Odin so i could update the Tab, but the program closed down about 1-2 sec. after. When I tried to turn on the tablet, there was ... no reaction (!)
Tried to go in "download mode", but no reaction or by factory-reset. just black screen ...
i also tried "Recovery Code" (Hold the Vol Down Key + Vol Up Key + Power Key for 15 seconds then release) but its same no reaction.
Can it really be true that I have ended up with a piece of useless plastic?
Pls your help is vevry important
thanks
Do not panic.
Better connect to wall charger for an hour first; then try recovery mode (volume up + power).
Regards
Kongar
thanks for the reply.
it was in the wall charger for an 7 hour . i just try ... nothing happend ...
It sounds like you have stopped it in the middle of loading the bootloaders... That almost the only way to hard brick your tab...
If you can't get it recognised by ODIN then the only thing available is to JTag it. You need to send it in to someone who can do this - look around the general forum, there was someone there doing it - most phone repair places will say it needs motherboard replaced, expensive.
If its still in warranty, you might be able to send back to samsung, tell them it happened while flashing through Kies.... Don't tell them you flashed with ODIN.
Seems like a few people are doing this...
Good Luck...
ok, now after i update the PIT the GT is boteabel but its hange in the startup page GALAXY Tap.
Note : Every time i but the GT in the Dawnloading Mode and try to flash a rom i get faild in kernel stage.
any help Pls ...
<ID:0/014> Added!!
<ID:0/014> Odin v.3 engine (ID:14)..
<ID:0/014> File analysis..
<ID:0/014> SetupConnection..
<ID:0/014> Initialzation..
<ID:0/014> Get PIT for mapping..
<ID:0/014> Firmware update start..
<ID:0/014> zImage
<ID:0/014>
<ID:0/014> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
that is mean the kernel is not signed
http://forum.xda-developers.com/showthread.php?t=1133590
check here
thanks Dude for the information. i think my solution somewhere in that post but i am new with Samsung GT. i can’t understand anything of that post.
can someone Pls explain to me how to do it in step by step
Thanks
ok, i think i get it . i will do that way and i will see what happend with me ...
Fainaly My Tab Is working .......
thanks every one
ksadude said:
Fainaly My Tab Is working .......
thanks every one
Click to expand...
Click to collapse
glad to see you up and running
an advice , if you are in froyo before flashing un Official roms\kernels please patch the bootloader apk before you go through anything , if you are now at gingerbread then flash wtf is coming in your way but only what made for your tab
Flash Safe
Hi I just decided to change my custom firmware to darkynote from rocketrom. It worked perfectly but I wanted to update my kernal also so afterwards i rebooted into recovery and installed version 2.6 of Abyss Note. Now My phone boots to the "Samsung Galaxy Note N7000" Screen and stays there unless i plug it in, then when i start it it goes to a frozen battery screen. I cant boot into recovery but i can boot into download mode. Can someone help me get my phone back to stock? I can't seem to find a tutorial anywhere that will work for me.
please help
edit: extra details, the Odin3 v1.85 process gets stopped at NAND Write Start!!
Here is the message feed:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXKL7_N7000OXAKL7_N7000XXKL7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> factoryfs.img
<ID:0/006> NAND Write Start!!
Also tried using CF-Root kernal. no luck there. The Bar in Odin says KERNEL and the green bar is full, also stuck at NAND Write Start!!.
Someone respond, im gonna cry.
First Relax man, dont be in hurry, read this guide twice/thrice n calmly proceed...
It is nice still you can entre to download mode.
First get Stock firmware from here Type N700 in search field, it will show all available firmware, select you wish to flash n download
Note : If you select latest ROM KL7, you won't get Root + CWM, for that you have to Flash another ROM first, then You have to Root + CWM,then Install Mobile odin pro, now flash KL7 with Mobile Odin pro with 'ever root' option enable. If you selecting another ROM, ignore this note
Get odin n extract
Install:
Install Kies on your computer, connect your phone and make sure that all the drivers installed correctly.
Extract tar file from the ROM you have download(password available at site from you have download). Put the phone into download mode (vol. down+home+power buttons),
Comlete close kies, if open. start odin, connect the phone via USB. Choose continue on the phone,
make sure that only two boxes are checked in odin - Auto Reboot and F.Reset Time.
Choose PDA button in Odin and select tar file you extracted before.
Choose START button.
The phone will reboot after the flash. Done.
Alright sounds good but i left it at the NAND write start thing overnight and when i came back it said this:
<ID:0/006> NAND Write Start!!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
Now I have a black screen and its flashing on and off with the frozen battery symbol. I think the battery is drained or something.
Also my download of the rom finished, there isnt any tar files its just a zip with an MD5 file and a Dll. Should i just but the MD5 file in the PDA section?
Edit: now my phone wont do anything when i try to put it in download mode.
Anyway if you are still able to entre Download mode, then try to flash stock kernel as i said above.
But thats what I mean, is it possible for the phone to not boot into download because the battery is dead or is my phone just bricked forever $850 dollars out the window.
tangelos said:
I cant boot into recovery but i can boot into download mode.
Click to expand...
Click to collapse
Actually i dont understand properly, your first post said U R getting into DW mode, if you can entre into boot mode, i guide you earlier, i cant say it bricked.
many time this happen after some error in procedure.
If you even not able to entre into Download mode, you need to entre it with JIG.
dr.ketan said:
Actually i dont understand properly, your first post said U R getting into DW mode, if you can entre into boot mode, i guide you earlier, i cant say it bricked.
many time this happen after some error in procedure.
If you even not able to entre into Download mode, you need to entre it with JIG.
Click to expand...
Click to collapse
Actually I was just updating you. At first it was working, then i tried a tutorial simmilar then the one you just gave me and it caused the phone to not turn on whatsoever. Can you link me to one of these "jigs". Thanks
You can get it readymade from market e.g. ebay or you can make it own home made
see here http://forum.xda-developers.com/showthread.php?t=819551
better first try with other battery once, if you cud manage
I was able to get a hold of one locally. When I plug it in, nothing happens. Any advice? Its for a GSII. Is that why? Or is it the battery thing. Before it stopped working completely, when i booted into download it would say low battery. Looks like its game over for my new phone .
I tried this with an old usb cable http://forum.xda-developers.com/showthread.php?p=20914895#post20914895.
Inserted the USB Jig afterwards. No luck
I suppose i have to take it to be J-tagged: http://toronto.kijiji.ca/c-buy-and-...-JTag-Service-Phone-Unlock-W0QQAdIdZ341742939
I'm sorry if this is not helping, or being so late, but I wanted to share my experience.
So, now can you enter the recovery menu by pressing the 3 buttons?
if you can then do a factory reset/wipe from the recovery and then flash an entire flashable ROM, maybe a stockROM or ROCKETROM.
you can upload ROCKETrom from the ordinary windows explorer , just copy and paste to the ex.SD.
the looping android animation actually happened to mine, and that's how I fixed it.
BTW: I didn't use Odin at all, or any other program.
Thanks for trying to help but this is completely irellavent. My phony CAN'T get into recovery and it NO LONGER CAN even get into Odin (download mode). I guess I wasn't clear when posting. Is anyone aware of a hardbrick fix or if sammy will repair ,my phone for a price.
Hi buddy. The EXACT same happened to be when trying to flash RocketV16. Frozen charge screen and everything.
To sort it I first let the phone start and hang on the black/white writing splash screen, removed the battery while it was on, held down the power button without the battery in for 3-5 seconds, put the battery back in. I then held Vol Down, the Home button and then the power down button (hold down power last) for some seconds until the Odin-Mode downloader came up.
After that I just followed a guide on flashing with Odin.
No more £9999999999 brick
unfortunatly i cant try that stratagy because i cant even get to the splash screen anymore. + i gave it to a local guy who claims to be able to jtag it. If it doesnt work ill send it to samsung and of course pay because i voided my warrenty. oh well. better then my old i9000m.
Galaxy Note N7000 Screen
I hate to hijack your thread but what I have to ask directly relates to your issue.
I have been searching for any file that contains this actual GALAXY Note Boot Screen - I am looking for this image file with the hope of making this my sole wallpaper/background. If there is anyway you or those who are reading this can PLEASE attach the file or at the very least provide a link so I 'd be able to download it for myself. I'd sincerely appreciate any help I can get.
I'm willing to pay ANY PERSON WHO PROVIDES A HIGH QUALITY IMAGE HOPEFULLY ALREADY SIZED FOR IMMEDIATE USE.
I'm sorry - please don't take this message as that of "shouting", My hope was to capture readers attention. Again, I apologize in advance for anyone having taken this message as shouting. That was not my intent.
Jim
connection
hey,i don't get how u manage to transfer stock firmware into the phone when pc cannot detect any file from the note???is it using odin??if yes,may someone share how to connect the phone to the pc via odin??
---------- Post added at 07:37 PM ---------- Previous post was at 07:27 PM ----------
hey how you manage to upload rocket rom,my pc cannot detect any file from my phone..even simple window explorer does not turn up..i hope u may help me...
me too Stuck at Galaxy Note Boot Logo
dr.ketan said:
First Relax man, dont be in hurry, read this guide twice/thrice n calmly proceed...
It is nice still you can entre to download mode.
First get Stock firmware from here Type N700 in search field, it will show all available firmware, select you wish to flash n download
Note : If you select latest ROM KL7, you won't get Root + CWM, for that you have to Flash another ROM first, then You have to Root + CWM,then Install Mobile odin pro, now flash KL7 with Mobile Odin pro with 'ever root' option enable. If you selecting another ROM, ignore this note
Get odin n extract
Install:
Install Kies on your computer, connect your phone and make sure that all the drivers installed correctly.
Extract tar file from the ROM you have download(password available at site from you have download). Put the phone into download mode (vol. down+home+power buttons),
Comlete close kies, if open. start odin, connect the phone via USB. Choose continue on the phone,
make sure that only two boxes are checked in odin - Auto Reboot and F.Reset Time.
Choose PDA button in Odin and select tar file you extracted before.
Choose START button.
The phone will reboot after the flash. Done.
Click to expand...
Click to collapse
Dr Ketan,I have mentioned the same in your other thread about stucking at Galaxy Note Boot Logo forver.
I was on CheckRom v6 and then i went to flash a kernel and then got stuck at Galaxy Note Boot Logo.
I am not able to got to recovery mode by pressing power+home and vol+,but I can go to Download mode by pressing power+home and vol-.so i went to desktop Odin and tried flashing one of the rom(Dr Ketan Guide to Rooting).Seems like Odin was succesful but still stuck at Galaxy Note Boot Logo.
please need help here,I hope my Galaxy Note is not Bricked!
Try flashing a cf root kernel back
Sent from my GT-N7000 using XDA
Remkve battery for few min, thn put it back n try to enter recovery
If you able to enter recovery wipe cache n wipe data, thn reflash rom with pc odin.
Sent from my GT-N7000 using xda premium
Hello gentlement. I have an Galaxy S I9000, and i have used a custom rom for about 2-3 months, unfortunately i can't remember which one, and as i cant boot my phone, im not sure how i can find out. I flashed it using Odin and Clockwork mod, both of which worked great. The problem now started out with me not being able to start my phone while charging, didn't pay much attention to it and just waited until it was charged, or unplugged it, started it, then charged it while it was on.
Now im having a different problem. I cant start my phone, the startscreen just says "Samsung galaxy S" etc, and it tries to reboot again and again.
I can start the phone into "download mode", but recovery mode doesnt seem to work.
Since the rom has been working flawlessly in the past, im not sure its the roms "fault"; might just be my phone singing on it's last verse.
Does anybody know what can cause this, or have a fix i can do in download mode?
I think i have read all the necesarry stickies, if i've missed something i apologize.
Thanks for all responses, regards - superegge
When this happens on ICS I reflash a kernel through odin in download mode and then reflash the ROM.
If your ROM is non wipe you could try this, otherwise I'd just try flashing a kernel and see if it boots.
superegge said:
Does anybody know what can cause this, or have a fix i can do in download mode?
Click to expand...
Click to collapse
First power down, remove battery, remove sim card and EXT SD card, preess power button for a min, reinsert battery and power it....
If still the same, flash a pit file as per guide given in Quick Fixes link below
xsenman said:
First power down, remove battery, remove sim card and EXT SD card, preess power button for a min, reinsert battery and power it....
If still the same, flash a pit file as per guide given in Quick Fixes link below
Click to expand...
Click to collapse
Thank you both for responses. I've tried following your guide many times now, installed odin etc. But everytime i try to flash my phone, this happens:
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> Removed!
Sometimes it gets to some zImage thing, but my device is still "removed" shortly after. Is it maybe a faulty cable?
Will check back in tomorrow, need to sleep now. Again, thanks for your help
superegge said:
Sometimes it gets to some zImage thing, but my device is still "removed" shortly after. Is it maybe a faulty cable?
Will check back in tomorrow, need to sleep now. Again, thanks for your help
Click to expand...
Click to collapse
yep, it could be due to cable or mostly the PC, try on lap top or another PC, added concerning this to Quick fixes, take a rest first,
ive had the same problem with Odin. But that had to do with rooting, and the oneclick superuser program.
Hopefully it will work when you try on a new pc. Good luck superegge!
The issue with mine is i have no history on this phone... its my co-workers who got it from a friend who is clueless about his own damn phone.... bought from a local guy.
anyways im in guam and i have no way of checking if this model was on a custom rom or what not or if the unit was pure stock all around i cant go into recovery mode at all only into ODIN which tells me to download a custom OS ... i myself am not a tech guy so im new to this just reading around but you all are well aware of what firmware and what not your unit was on but me i have no clue due to it not being able to fully start up and not charging only through my laptop port which at that wont even help cause my laptop tells me its not recognized but i have the drivers downloaded in already and have kies from my previous androids i had.
so my search is to find someone who can help me out here with me not knowing at all pretty much being blind to what the units firmware or ROM was even on and so forth.
further info
James Cortez671 said:
The issue with mine is i have no history on this phone... its my co-workers who got it from a friend who is clueless about his own damn phone.... bought from a local guy.
anyways im in guam and i have no way of checking if this model was on a custom rom or what not or if the unit was pure stock all around i cant go into recovery mode at all only into ODIN which tells me to download a custom OS ... i myself am not a tech guy so im new to this just reading around but you all are well aware of what firmware and what not your unit was on but me i have no clue due to it not being able to fully start up and not charging only through my laptop port which at that wont even help cause my laptop tells me its not recognized but i have the drivers downloaded in already and have kies from my previous androids i had.
so my search is to find someone who can help me out here with me not knowing at all pretty much being blind to what the units firmware or ROM was even on and so forth.
Click to expand...
Click to collapse
i downloaded a old ROM 2.3.5 i believe or somewhat and put it in my PC odin PDA put my phone into odin mode tab turned yellow. dowloaded as well the 16gb model PIT given by Dr.Ketan and also got emmsc brick PIT just in case now on my odin i just put in the PDA of the india version of an old rom for direct root accessability and so forth... the usual timing for the odin says 5-10 min. but mine is taking quite some time really....
more info
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXKK3_N7000ODDKK1_N7000DDKJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
thats what my panel remains on
Do you know recovery mode?
Press volume up button, power button and home button together for 10 secs and release. Tell us what happens.
Also read drketan guide how to flash gb rom.
Sent from my GT-N7000 using xda premium
dsmas said:
Do you know recovery mode?
Press volume up button, power button and home button together for 10 secs and release. Tell us what happens.
Also read drketan guide how to flash gb rom.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
i did Dr.Ketan guide im still awaiting response right now this is what it is stuck on right now
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXKK3_N7000ODDKK1_N7000DDKJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
i cant get the phone into recovery mode...... it just reboots to the boot screen and just stays there......
i dont know the previous OS on this phone or ROM or KERNEL cause i got it dead and stuck like so .... right now im still waiting for a response from the odin
Maybe i could help you
1st : can you remove you phone battery and tell us your phone model ?
2nd : put the battery in and charge your phone without booting ,, is it turning into a battery icon ? if so continue charging at least to more than half the battery
3rd : if your device is surly a gt-n7000 try to download another rom and after that check its csc before flashing , jelly bean update seems awesome right now ! .... i could tell you to download this amazing stock - rom but i need to make sure of your phone model first !
sniper9911 said:
1st : can you remove you phone battery and tell us your phone model ?
2nd : put the battery in and charge your phone without booting ,, is it turning into a battery icon ? if so continue charging at least to more than half the battery
3rd : if your device is surly a gt-n7000 try to download another rom and after that check its csc before flashing , jelly bean update seems awesome right now ! .... i could tell you to download this amazing stock - rom but i need to make sure of your phone model first !
Click to expand...
Click to collapse
yes the device is surely a GT-N7000 ill charge the battery and yes it shows the charging icon and can charge......
no help
still its a fail
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXKK3_N7000ODDKK1_N7000DDKJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
that is as far as i get then it just says fail...... my phone will only charge when connected to my laptop but not to my wall charger. my phone can enter download mode but not recovery mode.
when connected to my laptop the driver doesnt recognize it but it can be detected on odin but on kies it wont.
more help
okay ..... so its either the rom itself you are trying to flash or something else ....
first : what do you mean when you charge it from the plug it wont go ?? this is a real problem ... if you have another charger try it with first then if its not charging you'll need to service that mobile via samsung service center cause you cant do anything with an empty battery ....
if my guess is right then it a faulty charger and you need a new charger ... thats it , after checking this step you can try downloading another rom which i am sure it will be all right cause i am already using it :
try this link :
http://www.hotfile.com/dl/198300717/4646e97/N7000JPLSB_N7000OJPLSA_XSG.zip.html
download this version of odin too :
http://www.4shared.com/get/U6DTV0GA/gt-n7000_flasher__pit.html
you'll need to uninstall samsung kies , reboot you pc ,
and install samsung latest usb drivers :
http://forum.xda-developers.com/showthread.php?t=2038555
Note : DO NOT FLASH ANY FIRMWARE UNLESS YOU HAVE GOTTEN DEVICE IS READY TO USE AND ALL DRIVERS INSTALLED SUCCESSFULLY
afterwards you will extract odin and the firmware (md5 file + dll file "important" ) on you desktop in a folder and then you'll use odin in administrator mode then you make sure you note battery > 50% at least then make your note in odin mode ( vol down + home + power , then vol up to enter odin mode )
plug your note to usb and let the pc reapply drivers then youll put md5 file in pda bar and pit 16 gb in pit , also check your note internal capacity ... maybe you are lucky and have 32gb or even 64gb
okay then press start .... normally it would take less than 10 minutes to complete , 8 minutes 15 seconds of waiting then you have your note booting , unplug it from pc when odin says ok ( blue ) or pass ( green ) then here you go ... Jelly bean !!
teah man still no damn luck it keeps on failing and if it aint failed yet its like passed 30min. and still nothing changed.... do i put the PIT and the PDA or do i do it one by one.... do the GT7000 PIT first then the N7000 PDA after?!....
a step by step video would do more wonders than just reading.... cause i think my issue is way different cause i dont even know if this phone is unlocked or what or anything about it cause i got it bricked. stuck on boot logo and HARD RESET isnt accessible and im in GUAM.... ya know where GUAM is?!......
Me having same issue guys :crying: i am following this thread please experts help us !!
TRY booting in recovery or download mode.
recovery : volume up+home+power at the same time
download : volume down+home++power at the same time.
let us know if you can get into both or any of these modes
Mayank Chandwani said:
TRY booting in recovery or download mode.
recovery : volume up+home+power at the same time
download : volume down+home++power at the same time.
let us know if you can get into both or any of these modes
Click to expand...
Click to collapse
Not working mate
Sent from my GT-N7000 using xda premium
LucknowBoy said:
Not working mate
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
How long did you press/hold the buttons? In what order?
YEY!
thanks alot sniper9911 you're a live saver.., i follow the procedure that you've said then my problem solve
thanks again!
James Cortez671 said:
teah man still no damn luck it keeps on failing and if it aint failed yet its like passed 30min. and still nothing changed.... do i put the PIT and the PDA or do i do it one by one.... do the GT7000 PIT first then the N7000 PDA after?!....
a step by step video would do more wonders than just reading.... cause i think my issue is way different cause i dont even know if this phone is unlocked or what or anything about it cause i got it bricked. stuck on boot logo and HARD RESET isnt accessible and im in GUAM.... ya know where GUAM is?!......
Click to expand...
Click to collapse
Well, I´m with the same problem here on this side but i thinck this might work:
Check this link: http://forum.xda-developers.com/showthread.php?t=1901191 I dont know if this is going to work but i am going to run this in my samsung.
After that, I will reply you.
can someone help me...my n7000 just went off...i tried to start it,but loops on samsung logo. i used odin with stock rom...all went right it finished with Pass from the first try...but then again the phone didint want to start...i started updating apps and then looped again...every time it shows battery totaly empty...i tried a couple of times with odin and even pit file...even managed one time to start the phone,opened setting etc...battery indicator showed its full,and then suddenly phone just restarts and i cant do nothing?!
last time it rebooted automaticly opens android recovery and stays on that screen....? i cant do nothing....every time i plug it into charger he starts up and opens recovery ?
tried charging over computer usb,from a 220v,even from a dock....but he as soon as i plug it he opens recovery ?? any help...i think the main problem is battery....would it help to charge it in some other device or something ? or i screwed things big time ?
I had the same issue here.use odin still cant help
Anyone can help here
I stuck here.
<ID:0/003>NAND Write Start!!