hi all, I got used HTC 8s with WP 8.1 already installed and when I insert SD card, it says in storage sense that sd card was not found (I tried 2GB Samsung class 4, 8GB samsung class 2, 16GB kingston class 4 and 64GB Samsung class 10), but when I format SD to NTFS and then insert it into phone, it says following (you can see on screenshots). after failed formatting, SD is again not found but when I insert it to PC it is formatted on FAT32 or extFAT (64GB only)
I purchased 16 GB Sandisk Ultra class 10 and after factory reset card is finally recognized, problem solved
Related
Not a big problem but I cannot seem to flash with my 16GB microsd. My 8GB works fine. Anyone has similar issues or knows the solution? It can be troublesome to swap cards when flashing...
I have no problem flashing from my Sandisk 16GB card. Did you try reformatting the card (FAT32!) ?
I'm using a sandisk 16GB microSD card as well, and have no problems flashing from it. What brand is your microsd card? Then again, doesn't matter in your case, as you already bought it, but for the rest of us it might be important, so that we can stay clear of that brand.
I have the same problem mate, I could flash a few times at the beggining, from then, I have not been ablo to do so, I already tried formatting it to FAT32, erase all files and jut leave a blacimg.nbh file in it and it did not worked anyway.
doctorcete said:
I have the same problem mate, I could flash a few times at the beggining, from then, I have not been ablo to do so, I already tried formatting it to FAT32, erase all files and jut leave a blacimg.nbh file in it and it did not worked anyway.
Click to expand...
Click to collapse
Same here for me
Kingston 16 GB also SanDisk 16 GB.
After some flashes it stoped working, allways shows no imagefie
worked fine
- 16gb , 2gb
didnt work
- 2x 8gb and a 1gb
but i never sorted out why they wouldnt work even after re formating
I bought one week ago a new micro SD card 16Go Class 6 from Transcend...
And I have the same problem, which is not really a problem.
I use my old 8Go card for flashing.
I read few months ago that we can't flash the touch HD from anyone micro SD card. I don't know why ?
info : Transcend micro SD 16Go FAT32 32-Kilo
if you count free space on empty cards, transcend 8gb and sandisk 8gb will show 8gb but differnt values if you look in details
seems different layout of partitions for different vendors
flashing from sandisk is always OK
transcend = no go
I am using Sandisk 16gb class 6. My other 8gb sandisk class4 & kingston class 6 works fine...
Can flash but UC does not work
I can flash using my 16 gbyte Sandisk but I cannot get UC to work. I either get an error saying the cabs cannot be located or it just hangs. Anyone else see that particular problem?
Z
Transcend are BAD. They seem to have real problems with large files such as ROM Images and MemoryMap data files.
So i buy New Micro SDHC Card for my LG Optimus 2X SanDisk 16GB Class 4
So basicly i put the card in phone but nothing happend on sd card screen total space available space are "unvailable"
I put sd card on my other phone - very old nokia and the card worked ........
Is there any salution about this ?
KrisPK said:
So i buy New Micro SDHC Card for my LG Optimus 2X SanDisk 16GB Class 4
So basicly i put the card in phone but nothing happend on sd card screen total space available space are "unvailable"
I put sd card on my other phone - very old nokia and the card worked ........
Is there any salution about this ?
Click to expand...
Click to collapse
I have the exact same problem, my 16GB Class 10 is not showing up on my phone, the memory card is formatted on FAT32, does it need to be formatted on to something different?
After formatting my SD card on my phone AND on my laptop it now works
i read about microsd class 4 somewhere in xda optimus 2x forum is problem in this phone.
I have the exact same problem, my 16GB Class 10 is not showing up on my phone, the memory card is formatted on FAT32, does it need to be formatted on to something different?
Click to expand...
Click to collapse
for class 10 i don't have problem. i use 32gb class 10 and it's directly show up on the phone. do you shutdown your phone first when mounting the microsd?
I have bought Sandisk microSDXC 64GB class 10 UHS1. When I put it in my computer using USB2.0 Kingston Mobile Reader it could not recognise it. I removed it and I placed it in my Galaxy Note. I went into clockworkmod 6.19 (Non Touch) and I partitioned the card with 2GB or 4GB (I do not remember exactly!!!) and Swap size 256k. When my phone restarted, the phone did not recognize the card. Therefore, I went through the internet to find a solution. I found the program "EaseUS Partition Master 9.1.1 Home Edition" and reformatted the card with FAT32 and cluster size 32KB. When it finally finished, it gave me the size 27.46GB!! I reformatted through SD Formatter 3.0 hoping that the partition used through Clockworkmod messed up the actual size of the card. I successfully re-formatted the card, however the size remained the same. I know that the size of a microSDHC card 32GB is around 29GB, therefore it does not explain size 27.46GB.
My question now, if there is an answer!!! Is the card faulty or did Clockworkmod messed with the card?
Please advise if possible!
Thank you very much for taking the time to read this, because I think this a very strange story!
Wrong section.
Have you tried formatting the card with your phone?
Settings > Storage (Scroll to the bottom)
Make sure to pick the correct one.
Haralambos Lambrianides said:
I have bought Sandisk microSDXC 64GB class 10 UHS1. When I put it in my computer using USB2.0 Kingston Mobile Reader it could not recognise it. I removed it and I placed it in my Galaxy Note. I went into clockworkmod 6.19 (Non Touch) and I partitioned the card with 2GB or 4GB (I do not remember exactly!!!) and Swap size 256k. When my phone restarted, the phone did not recognize the card. Therefore, I went through the internet to find a solution. I found the program "EaseUS Partition Master 9.1.1 Home Edition" and reformatted the card with FAT32 and cluster size 32KB. When it finally finished, it gave me the size 27.46GB!! I reformatted through SD Formatter 3.0 hoping that the partition used through Clockworkmod messed up the actual size of the card. I successfully re-formatted the card, however the size remained the same. I know that the size of a microSDHC card 32GB is around 29GB, therefore it does not explain size 27.46GB.
My question now, if there is an answer!!! Is the card faulty or did Clockworkmod messed with the card?
Please advise if possible!
Thank you very much for taking the time to read this, because I think this a very strange story!
Click to expand...
Click to collapse
How sure you are that your Kingston reader is SDXC compatible? If it's not, it can be that your card is damaged now and can't be fixed (I had that issue). Second thing you should have format the card using some exFAT compatible ROM (for example XLS7 or XLSA) in storage section of the phone, not in CWM.
You should also check if there isn't any other partitions on the card using EaseUS Partition Master. I would delete all partitions on the card and then format using exFAT. But it would work only if the card isn't already damaged by incompatible reader.
If you search abit you will find that sdxc cards used with sdhc reader can be damaged. google it you will find it.
Sent from my GT-N7000 using Tapatalk 2
Format it with the phone. That usually gets it.
According to the official information for the Lenovo K3 Note it only supports MicroSD cards upto 32 GB. I tried my Kingston 64 GB card and it doesn't work but I am hearing that people have gotten 64 GB cards to function in their phones.
Can anyone confirm one way or another whether 64GB cards can work in this phone? If so are they specific makes / models?
Many thanks in advance.
Try formatting the SDcard in FAT32, 64GB/128GB uses the ExFat format, that's why your K3 note won't see it, this SoC don't support exFat. When you put your Sd in the phone it won't offer a formatation to work?
It didn't appear to offer any formatting options but I will give it another go.
maxgreece said:
It didn't appear to offer any formatting options but I will give it another go.
Click to expand...
Click to collapse
I had to format mine on a laptop before the phone recognised it
Well it seems like good news. I put the card into an SD card adapter and then into the PC. It loaded some drivers and recognised the thing. I then formatted it using NTFS and reinstalled it on the phone. This time the phone recognised it as either an empty card or a card that needed formatting so I re-formatted it once more and it registers as a card with 58 Gb free. Yippee!!!
Currently copying the 32 Gb card onto the new one using my PC. Hopefully it will go well and then I'll copy some more stuff over just to see that it will genuinely go over the 32 Gb limit.
So far....so good
Hi,
Can you please post the further testing of 64GB Card. I am planning to buy 64GB card Class 10 SDHC please help me with your review
---------- Post added at 10:59 PM ---------- Previous post was at 10:56 PM ----------
maxgreece said:
Well it seems like good news. I put the card into an SD card adapter and then into the PC. It loaded some drivers and recognised the thing. I then formatted it using NTFS and reinstalled it on the phone. This time the phone recognised it as either an empty card or a card that needed formatting so I re-formatted it once more and it registers as a card with 58 Gb free. Yippee!!!
Currently copying the 32 Gb card onto the new one using my PC. Hopefully it will go well and then I'll copy some more stuff over just to see that it will genuinely go over the 32 Gb limit.
So far....so good
Click to expand...
Click to collapse
Hi,
Can you please post the further testing of 64GB Card. I am planning to buy 64GB card Class 10 SDHC please help me with your review
Well I have been using the card for the last month and all fine. I switched to limoncelo this morning and the card is still recognised with no problems. For reference this is a Kingston 10X 64 GB card. I don't know if other cards might be problematic or not. All I can say is that this is a safe option.
Limoncello nice too....
I am using Sandisk 64GB class10 UHS-1 card directly on the phone, from the day I got the phone, without any issues...
if you go to mediatek "engineer mode"> 3d tab "hardware testing> "IO" >"MSDC" >"MSDC SD3.0 TEST
There are various options such as "sd3 mode: sdhc highspeed, uhs sd12 etc etc.
Does anyone have more information on what these options mean and if they can bring any change in sd card recognition?
just wanted to share i had a sandisk transcend class 10 32 gb, 2 weeks ago i got my chinese 512 gb class10 sdhc as for test purpose for 9$ of ebay. in benchmarks it scores better.
however all works, currently i am on the phoenix rom with exfat file system support.
i just installed my 64gb sd card, and let the phone format it as portable sd card. now i have 59G ! this is under 1606 Cuoco92 custom rom.
Anyone else get any errors when formatting their SD Card? I have a Samsung 64GB
Note 4 (Tmobile) SD Card unrecognized
Just purchased a used Tmobile Samsung Note 4 SM910T (upgrading from a Tmobile Note 3).
First thing I did was reset the phone to factory defaults with 4.4.4 and got it running. Everything seemed to work fine, programmed the finger print scanner (a nice feature), installed some apps. Seems to work like it's supposed to. Now, time to get the SD Card switched over.
Pulling the SD Card, (Sandisk Extreme 32gb (HC I) MicroSD) from the Note 3 and putting it into the Note 4, the SD Card was not recognized. So I put is back into the Note 3 to make sure there wasn't a problem, everything showed up fine, all files and pics where still there.
So I pulled the battery, thinking the card had to be in the slot upon boot up, I inserted the SD card and powered up the phone again. Still nothing, no SD Card detected. Humm...
I had an old 8gb Sandisk card laying around, popped it into my PC to see what was on it, had some files on there so I tried putting that SD Card into my new Note 4, nothing. Not recognized. I put the old card into my Note 3, shows up fine.
When I go into "Storage" and scroll down to the bottom, "Mount SD Card" Insert SD Card" are showing, but not the normal "Total Space" "Available Space" "Unmount SD Card" and "Format SD Card" even though the SD Card is inserted correctly into the SD Card slot of the phone. I again tested that SD card in my old Note 3, still shows up fine.
I have tried reformating the 32 gb SD card on my PC, trying all 3 options NTFS, FAT32 and exFAT. I even formated in the Note 3. None of those work, I get the same result. The Note 4 does NOT recognize an SD Card at all.
Bad Hardware?
Please help. Thank you