Database Develop

0.15mm (Dot View friendly) Tempered Glass Screen Protector List

I know of four.
- MIME Feather
http://mimeusa.com/product/htc-one-m8-feather-glass-screen-protector/
- JiiZii
http://www.ilongsight.net/jiizii-gl...s-screen-protector-for-htc-one-m8-p-2061.html
- Glass M
http://pages.ebay.com/link/?nav=item.view&id=251564245465&alt=web
- Unnamed eBay
http://pages.ebay.com/link/?nav=item.view&id=331242293372&alt=web
Personally I've only tested the MIME and it was disappointing. Has known issues reported by many users. But it does work with Dot View.
I haven't tried the others. The unnamed eBay one quotes a hardness rating of 10H which is difficult to believe given thicker glass protectors max out at 9H.
Anyone tried any or know of any others?
Edit: I might give the Glass M a try. Found its official site:
http://glass4m.com/collections/glass-protector/products/glass-m-htc
It's made from Corning Gorilla Glass.

Spigen
Chris_c81 said:
I know of four.
Personally I've only tested the MIME and it was disappointing. Has known issues reported by many users. But it does work with Dot View.
I haven't tried the others. The unnamed eBay one quotes a hardness rating of 10H which is difficult to believe given thicker glass protectors max out at 9H.
Anyone tried any or know of any others?
Edit: I might give the Glass M a try. Found its official site:
It's made from Corning Gorilla Glass.
Click to expand...
Click to collapse
Do you know if the 0.23mm Spigen Glas.tR will work with the dot case?-

X1XNobleX1X said:
Do you know if the 0.23mm Spigen Glas.tR will work with the dot case?-
Click to expand...
Click to collapse
I couldn't say for sure. I only know that for certain, the 0.15mm ones work perfectly with Dot View case.
Sent from my HTC One_M8 using Tapatalk

Purchased the Glass-M
Chris_c81 said:
I couldn't say for sure. I only know that for certain, the 0.15mm ones work perfectly with Dot View case.
Sent from my HTC One_M8 using Tapatalk
Click to expand...
Click to collapse
I decided to purchase the Glass-M aswell, it's a lot cheaper than the Spigen.
Hopefully it lives up to the quality.

I just ordered Glass-M screen protector (0.15mm because i've got the dot view case) and i think it should arrive next week or so... i'll post my impressions here as soon as i get it :good:

Not .15mm, but Amazon has the Hero glass .18mm for 14.99....
http://www.amazon.com/HERO-GLASS-Pr...=1405052435&sr=8-1&keywords=Htc+m8+hero+glass
Sent from my iPad using Tapatalk

Any review? Appreciate =b

eep02b said:
Not .15mm, but Amazon has the Hero glass .18mm for 14.99....
http://www.amazon.com/HERO-GLASS-Pr...=1405052435&sr=8-1&keywords=Htc+m8+hero+glass
Sent from my iPad using Tapatalk
Click to expand...
Click to collapse
From what I can find, and the reviews on amazon. This glass is actually like double the thickness they advertise. It's like .35mm not .18.

suparnemo said:
From what I can find, and the reviews on amazon. This glass is actually like double the thickness they advertise. It's like .35mm not .18.
Click to expand...
Click to collapse
I actually have the linked screen protector, and while I don't have anything to measure the actual thickness of the protector, I know for a fact that it's thinner than the Nillkin tempered glass protector. I had that one on my phone prior to the Hero glass, and installed it on my wife's M8. It's so much more noticeably thinner, my wife made me but one for her after using my phone the other day. It's definitely closer to .18 than it is to .35
Sent from my HTC One_M8 using Tapatalk

Spigen's GLAS.tr does not play well with the Dot View case. Which lead myself to return the Dot View for the GLAS

Why?
T3hBraveBoss said:
Spigen's GLAS.tr does not play well with the Dot View case. Which lead myself to return the Dot View for the GLAS
Click to expand...
Click to collapse
Lucky I didn't purchase the Glass.tR then. What is wrong with the glass?

X1XNobleX1X said:
Lucky I didn't purchase the Glass.tR then. What is wrong with the glass?
Click to expand...
Click to collapse
Too thick, but I really like it.

I have the MIME Feather Glass and it works perfectly with my Dot View. At first the flap didn't close 100% but I've had them for about a month now and the cover is now flush with the phone when it closes.
I'm not too familiar with many of the issues people have reported with the MIME Feather, but I can say that I wish it had rounded edges. I think having squared off edges causes dirt and debris to line up along them, although I haven't heard if the rounded edges don't have that problem.
Not like it's going to make or break anybody's decision, but the MIME Feather does have fantastic packaging and installs like a charm. Not a single air bubble or spec of dirt got under my screen and that's the first time in my entire history of owning screen protectors.

Anyone received the GLASS-M yet? Mine is in transit from Hong Kong.
With regards to MIME, my biggest issue is the price they charge versus the quality of the product. With plastic conventional protectors things were different. There was a noticeable difference between the poor and the best examples from companies. With these tempered glass ones though, you can buy an average priced one (sometimes even a cheaply priced one) and you'll still have a decent product. The Nillkin for example is priced in the middle, yet its quality is superb and in my opinion bests the MIME equivalent (Ghost) offering.
I know. I've had both.
Sent from my HTC One_M8 using Tapatalk

This week.
Chris_c81 said:
Anyone received the GLASS-M yet? Mine is in transit from Hong Kong.
With regards to MIME, my biggest issue is the price they charge versus the quality of the product. With plastic conventional protectors things were different. There was a noticeable difference between the poor and the best examples from companies. With these tempered glass ones though, you can buy an average priced one (sometimes even a cheaply priced one) and you'll still have a decent product. The Nillkin for example is priced in the middle, yet its quality is superb and in my opinion bests the MIME equivalent (Ghost) offering.
I know. I've had both.
Sent from my HTC One_M8 using Tapatalk
Click to expand...
Click to collapse
Mine should be coming this week.
Hopefully it works out well.

Received the GLASS-M today. Came packaged really well (kudos to the seller). The actual product packaging is neat and tidy. Has two compartments within. One housed the protector, the other side the cleaning kit. Inside you get:
- Screen protector
- Alcohol wipe
- Cleaning cloth
- Bubble remover (not sure why, no need)
- Static cling dirt remover
The protector itself applied easily. Simply lined up the top edge and gently eased the bottom end down. Went in straight first time.
Looks and feels as good as you'd expect from a glass protector. Finger slides over it as if it wasn't there. Does not seem to have any issues with fingerprints, very resistant.
If I had to pick some negative points I'd have to go with:
- could be a fraction (and I mean fraction) longer
- doesn't have rounded edges
The first though, is just me being particularly finicky. It well covers the screen despite.
The second affects all 0.15mm protectors I've found to date. I guess it's pretty hard to round off an edge so thin! So I can live with that.
Otherwise though, I have nothing but good things to say about it. The only other 0.15mm protector I've had is the Mime Feather. I'd choose the GLASS-M over the Mime without question. The Mime felt flimsy, really flimsy and scratched far too easily. This one feels more sturdy, yet still as thin. Yet to see if it's better at resisting scratches however, I don't doubt it will do a better job. The Mime was terrible for that.
Works nicely with Dot View by the way.
Highly recommended.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my HTC One_M8 using Tapatalk

Great review.
Chris_c81 said:
Received the GLASS-M today. Came packaged really well (kudos to the seller). The actual product packaging is neat and tidy. Has two compartments within. One housed the protector, the other side the cleaning kit. Inside you get:
- Screen protector
- Alcohol wipe
- Cleaning cloth
- Bubble remover (not sure why, no need)
- Static cling dirt remover
The protector itself applied easily. Simply lined up the top edge and gently eased the bottom end down. Went in straight first time.
Looks and feels as good as you'd expect from a glass protector. Finger slides over it as if it wasn't there. Does not seem to have any issues with fingerprints, very resistant.
If I had to pick some negative points I'd have to go with:
- could be a fraction (and I mean fraction) longer
- doesn't have rounded edges
The first though, is just me being particularly finicky. It well covers the screen despite.
The second affects all 0.15mm protectors I've found to date. I guess it's pretty hard to round off an edge so thin! So I can live with that.
Otherwise though, I have nothing but good things to say about it. The only other 0.15mm protector I've had is the Mime Feather. I'd choose the GLASS-M over the Mime without question. The Mime felt flimsy, really flimsy and scratched far too easily. This one feels more sturdy, yet still as thin. Yet to see if it's better at resisting scratches however, I don't doubt it will do a better job. The Mime was terrible for that.
Works nicely with Dot View by the way.
Highly recommended.
Sent from my HTC One_M8 using Tapatalk
Click to expand...
Click to collapse
Mine should be coming tomorrow!
Great review, I'm happy I purchased the Glass-M.

Chris_c81 said:
Received the GLASS-M today. Came packaged really well (kudos to the seller). The actual product packaging is neat and tidy. Has two compartments within. One housed the protector, the other side the cleaning kit. Inside you get:
- Screen protector
- Alcohol wipe
- Cleaning cloth
- Bubble remover (not sure why, no need)
- Static cling dirt remover
The protector itself applied easily. Simply lined up the top edge and gently eased the bottom end down. Went in straight first time.
Looks and feels as good as you'd expect from a glass protector. Finger slides over it as if it wasn't there. Does not seem to have any issues with fingerprints, very resistant.
If I had to pick some negative points I'd have to go with:
- could be a fraction (and I mean fraction) longer
- doesn't have rounded edges
The first though, is just me being particularly finicky. It well covers the screen despite.
The second affects all 0.15mm protectors I've found to date. I guess it's pretty hard to round off an edge so thin! So I can live with that.
Otherwise though, I have nothing but good things to say about it. The only other 0.15mm protector I've had is the Mime Feather. I'd choose the GLASS-M over the Mime without question. The Mime felt flimsy, really flimsy and scratched far too easily. This one feels more sturdy, yet still as thin. Yet to see if it's better at resisting scratches however, I don't doubt it will do a better job. The Mime was terrible for that.
Works nicely with Dot View by the way.
Highly recommended.
Sent from my HTC One_M8 using Tapatalk
Click to expand...
Click to collapse
Almost a week on. Not seeing any signs of hairline scratching yet. By now with the Mime I had seen some, so that'd suggest this one is made of tougher stuff. No other issues to report. Great 0.15 protector.
Sent from my HTC One_M8 using Tapatalk

Chris_c81 said:
Almost a week on. Not seeing any signs of hairline scratching yet. By now with the Mime I had seen some, so that'd suggest this one is made of tougher stuff. No other issues to report. Great 0.15 protector.
Sent from my HTC One_M8 using Tapatalk
Click to expand...
Click to collapse
Thanks for the update. Just got mine from Aliexpress, from this store EBuy.
By the way, edges are curved. Maybe new revision.
Also retail box like yours. Works with my dot view case. Great protector.
Love it!
Sent from my HTC One_M8 using XDA Premium 4 mobile app

Mike Lim said:
Thanks for the update. Just got mine from Aliexpress, from this store EBuy.
By the way, edges are curved. Maybe new revision.
Also retail box like yours. Works with my dot view case. Great protector.
Love it!
Sent from my HTC One_M8 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Still spotless few weeks in. Really impressed at how resistant this one is to scratches.
Sent from my HTC One_M8 using Tapatalk

Just want to confirm - who's using a screen protector (glass/non-glass) AND a case?

Just want to know. I have a spigen Rugged armor case that i have on right now.
I bought spigen curved crystal film and i tried to put it on but i failed so it's in the trash right now.
So right now i have a choice to just use the case and just leave it be or go to the mall and apply a zagg screen or something or buy another screen protector online.
my only concern is: i heard a lot of people say that screen protectors are not compatible with cases, so it's either one. And with the S7 edge having a "glass back" i figured a case will be more important?
Can anyone confirm? I see a lot of recommendations for cases and protectors but none of them are "in combination of" so yea.. thanks!

It's not a black and white answer.
There are slim fitting cases such as the Spigen Thin Fit, Ringke Slim, Samsung LED wallet case (note: latter I'm not sure of with TGSP, fine with TPU/PET film) which don't encroach too much on to the edges and screen area. These type of cases will work happily alongside 99% of all TGSP and traditional TPU/PET film protectors.
The more rugged cases, the type which lip round on to the screen and/or edges, these will lift or crack 99% of all TGSP or TPU/PET protectors in varying degrees of severity.
Lastly, there are a number of brands (Best Skins Ever for example) offering "case friendly" protectors. At present they're limited to TPU/PET. I've yet to see a case friendly TGSP marketed as such. These case friendly ones, whilst cannot guarantee 100% compatibility, will work with the majority of cases whether rugged or slim.
So there's your answer.
Sent from my SM-G935F using XDA-Developers mobile app

I am using the Armor Suit MilitaryShield "case cut" wet apply screen protector. I am a bit of a case junky and have 13+ cases for my S7E. The screen protector is compatible with all of the cases I own. I would prefer a tempered glass screen protector but that is largely an exercise in futility for this phone.
If you wish to achieve maximum compatibility with cases, I would recommend one that is case cut.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent by mobile via Tapatalk

I'm using front and rear protectors (from Best Skins Ever) with the official LED case. No issues.
Edit: I take that back. The two bottom plastic corners of the case show fracture cracks after just 3 days. Brutal.

I am use glass protector for s7 edge.

Have a Nacodex tpu film (like hori protector for handheld gaming systems) and otterbox symmetry case. My girl has the same protector and has the otterbox strada case. The only protector that has lasted with these cases. Also put cheap xtreme guard protector on back. I wish someone would make a clip holster(seidio)

Sonin66 said:
Have a Nacodex tpu film (like hori protector for handheld gaming systems) and otterbox symmetry case. My girl has the same protector and has the otterbox strada case. The only protector that has lasted with these cases. Also put cheap xtreme guard protector on back. I wish someone would make a clip holster(seidio)
Click to expand...
Click to collapse
can you post pictures? and how hard is it to apply without bubbles?

I got a new edge and had to remove my old protector. This new one I have won't lay down like my first one causing all types of bubbles. All just have to reapply another but to lazy.
[/URL][/IMG]
[/URL][/IMG]
[/IMG]

TJ446 said:
I am using the Armor Suit MilitaryShield "case cut" wet apply screen protector. I am a bit of a case junky and have 13+ cases for my S7E. The screen protector is compatible with all of the cases I own. I would prefer a tempered glass screen protector but that is largely an exercise in futility for this phone.
If you wish to achieve maximum compatibility with cases, I would recommend one that is case cut.
Sent by mobile via Tapatalk
Click to expand...
Click to collapse
This armorsuit, thus it attract lint at the edge? Used IQshield case friendly version,but it attract too much lint. How's the fingerprints resistant coating?
Now using spigen curved HD but it's easily get scratched.
Sent from my SM-G935F using XDA-Developers mobile app

squall_kay said:
This armorsuit, thus it attract lint at the edge? Used IQshield case friendly version,but it attract too much lint. How's the fingerprints resistant coating?
Now using spigen curved HD but it's easily get scratched.
Sent from my SM-G935F using XDA-Developers mobile app
Click to expand...
Click to collapse
Fingerprint resistance is better than most film screen protectors. Quite easy to wipe clean as well.
Lint resistance is fairly difficult to provide commentary on - I tend not to tolerate that type of thing and keep the channels between the screen and edges of whichever case I may be using (and my pockets) as clean as possible.
I will say that this screen protector dents and scratches easily, but then heals itself after a day or two. I was worried at first but then the marks gradually disappeared.
Appearance - glare is apparent and a very mild amount of orange peel. It is certainly better than Zagg. Clarity and colour reproduction is excellent.
Scroll feel is 7.8/10 verses having no screen protector. This is a necessary evil for wet screen protectors. There is a miniscule slight amount of finger drag when gliding over it.
Ease of Application - to adhere properly, you really must force yourself not to use it for awhile. I am lucky in that I have other devices I could use while the screen protector was drying. I let it dry a full 24 hours before placing it into a case. The drying time is very important for the edges to adhere properly.
Sent on mobile via Tapatalk

I have been using a $10 glass protector on my S7E for exactly a month now with the Unicorn Beettle case with one single issue.
There is a grid like pattern on the glass that is only noticeable on the Gear VR, but not at all with normal use.
My guess would be that this is somehow to keep the screen sensitivity.
I was afraid that the case would fracture the glass protector but that has not been the issue.
They work great together.

Which one is it? link?

happyantix said:
Which one is it? link?
Click to expand...
Click to collapse
Its from ebay. I previuosly posted about it here.

poncespr said:
I have been using a $10 glass protector on my S7E for exactly a month now with the Unicorn Beettle case with one single issue.
There is a grid like pattern on the glass that is only noticeable on the Gear VR, but not at all with normal use.
My guess would be that this is somehow to keep the screen sensitivity.
I was afraid that the case would fracture the glass protector but that has not been the issue.
They work great together.
Click to expand...
Click to collapse
That's the exact same case I have. I'll check that protector out as I haven't seen anyone else post saying they have a glass protector with a case like ours. Glad to see it hasn't broken since it's sandwiched.
Sent from my SM-G935V using Tapatalk

I'm using Spigen Thin Fit case together with IQShield Liquid Skin, fits well

I have a ArmorSuit full-coverage screen protector on. I also gave it a good 12 hours before use and 24 hours before en-casing.
It has fit well with the Ringke Fusion, Obliq Naked Shield, and Ghostek cases. I currently have the Ghostek on.
The Ghostek edges overlapped a bit on the top/bottom, I used a business card to smooth down the ArmorSuit under the edges and have no creep. I no gaps between the screen protector and the Ghostek case.

C0derbear said:
I have a ArmorSuit full-coverage screen protector on. I also gave it a good 12 hours before use and 24 hours before en-casing.
It has fit well with the Ringke Fusion, Obliq Naked Shield, and Ghostek cases. I currently have the Ghostek on.
The Ghostek edges overlapped a bit on the top/bottom, I used a business card to smooth down the ArmorSuit under the edges and have no creep. I no gaps between the screen protector and the Ghostek case.
Click to expand...
Click to collapse
Which ghostek case? Can you take a few pictures?
Sent from my SM-G935F using XDA-Developers mobile app

[email protected] said:
Which ghostek case?
Click to expand...
Click to collapse
Ghostek Cloak => Amazon link
I'll try to post some pics later.

I'm personally debating beetle pro full or beetle pro hybrid.. i'd like the edge protection.. i wish it had a kick stand as well.. i guess with hybrid if i go with gear vr it is easier to take off.. rumor is, though, if you cut off the two rubber bumpers on gear vr, a case (or maybe just a screen protector) will somehow fit?
The beetle pro full is apparently very hard to remove in a hurry. The hybrid lacks the edge protection.
I've already tried one tempered glass protector on amazon and it falls off or lacks sensitivity unfortunately.. seems they all have this issue.. now i'm trying to find a 100% working alternative or maybe regular type that also is good sensitivity.. 100% is probably impossible with this phone.
This Roya with kickstand case i initially got.. but its far too slippery and is falling off at times.. i'm guessing the beetle pro is the answer (full one) and just deal with it later with VR.

Orzly Tempered Glass Screen Protector [Small review]

The Orzly Tempered Glass Screen Protector. I used 3 of them on my 1+1 and they did their job perfectly, not a scratch on the screen even when I sometimes thought it was done for. So after ordering my 1+3 i first bought the tempered glass screen protector from Oneplus. Huge mistake. Hands down the worst screen protector i used so far. So almost immediately i ordered myself a trusted Orzly screen protector.
Installation:
Installation of the screen protector was quick and easy. I guess the procedure is about the same for every screen protector out there but still.. The only problem is that even i wiped the screen clean with the cloth etc. But still i managed to get a spec of dust on the screen which really annoys me. I guess i'll just buy another one
Conclusion:
Great screen protector, does the job perfectly. I hope i don't need to replace it any time soon.
Pictures:
As you can see on the picture below, the screen protector from Oneplus isn't all that good...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
However the Orzly one:

thanks for the review but before people run out to buy one based on this review, a few things i feel should be mentioned:
1) this Orzly protector does NOT work with a lot of cases. if you have a case that covers the sides but doesn't go over the glass, it will push and lift the Orzly. if you do have a case that fits snug, it will push in the glass and create weird color marks.
2) the protector has dots on it that are clearly visible in direct sunlight and quite frankly, make the screen look like crap.
3) the protector is a smudge/fingerprint magnet!!!
4) because it doesn't quite stick to the screen, unless the sides are fully covered by a case, you will get dust inside.
5) i did notice a slight touch response degradation but its not major.
my conclusion: Orzly dropped the ball on this one. i had their protector on the One and the Two and they were incredible but the one for the Three is a mess and i will be asking for my money back.

I can only confirm it. I'm very disappointed with Orzly tgsp. It doesn't work with orzly flex case. Matrix dots are very annoying, so far it's the worst screen protector I purchased.
Wysłane ze zmywarki

Rattles said:
thanks for the review but before people run out to buy one based on this review, a few things i feel should be mentioned:
1) this Orzly protector does NOT work with a lot of cases. if you have a case that covers the sides but doesn't go over the glass, it will push and lift the Orzly. if you do have a case that fits snug, it will push in the glass and create weird color marks.
2) the protector has dots on it that are clearly visible in direct sunlight and quite frankly, make the screen look like crap.
3) the protector is a smudge/fingerprint magnet!!!
4) because it doesn't quite stick to the screen, unless the sides are fully covered by a case, you will get dust inside.
5) i did notice a slight touch response degradation but its not major.
my conclusion: Orzly dropped the ball on this one. i had their protector on the One and the Two and they were incredible but the one for the Three is a mess and i will be asking for my money back.
Click to expand...
Click to collapse
Completely agree Rattles, this screen protector doesn't fit with Orzly's own Grip Pro case. For me the touch response degradation was so bad, I removed the screen protector after less than 24 hours with it fitted and fitted it to the inside of my bin.
Personally, I think that this screen protector is utter trash.

I second the negative experience with the Orzly TGSP, which is quite a bummer. I had very good experience with their TGSP on previous devices, but I guess the curved screen made them make a bad deciscion to go with the black bordered one.

Rattles said:
2) the protector has dots on it that are clearly visible in direct sunlight and quite frankly, make the screen look like crap.
3) the protector is a smudge/fingerprint magnet!!!
4) because it doesn't quite stick to the screen, unless the sides are fully covered by a case, you will get dust inside.
5) i did notice a slight touch response degradation but its not major.
Click to expand...
Click to collapse
I am pretty happy with the Orzly which I use with a sandstone case.
2) Dots are only visible under certain circumstances, but it is rare, in my case 99% of the time not visible. I already forgot about them.
3) Agree, it is a fingerprint magnet. But also easier to clean than the original screen protector.
5) Didn't notice any touch response degradation and must state that thanks to a more slippery surface the fingers slide better which for me is a big plus.

Although it fits perfect and the dot matrix doesn't bother me but dust entered the screen protector after a week even though I was using a case.

Very disappointed with orzly. Not 2.5d at all. Glass is bigger than screen and there are a lot of dust in the gap. Dots are visible quite often. Doesn't stick well.. Hate it.

Bought and discarded the protector after one day of use. For all the points mentioned by many above. Waste of money.
Sent from my ONEPLUS A3003 using Tapatalk

robthebass said:
I am pretty happy with the Orzly which I use with a sandstone case.
2) Dots are only visible under certain circumstances, but it is rare, in my case 99% of the time not visible. I already forgot about them.
3) Agree, it is a fingerprint magnet. But also easier to clean than the original screen protector.
5) Didn't notice any touch response degradation and must state that thanks to a more slippery surface the fingers slide better which for me is a big plus.
Click to expand...
Click to collapse
ushpiy said:
Although it fits perfect and the dot matrix doesn't bother me but dust entered the screen protector after a week even though I was using a case.
Click to expand...
Click to collapse
Yes, i agree. The dots are only visible in direct sunlight. That still so many have bad experience with this tgsp. I really like it!

Just to add one more negative thing: the Protector is very reflective (compared to other tempered glass protectors and stock Display). Hence outdoor usage is limited.
Gesendet von meinem ONEPLUS A3003 mit Tapatalk

I also have this one and I'm super disappointed.
I mean, why don't they just make it translucent? And why is there no glue on the glass? It lifts off even without a case...
Also the cutouts aren't perfect, while the camera and speaker ones fit perfectly I only see half of the buttons. And those fingerprints!
Really, even the pre-applied protector from OnePlus was better.

I can confirm all these flaws. Anyone got a recommendation for a good one? The official oneplus one is back in stores, so I maybe just end up buying this.

I threw it away as well. It was worse than the official one tbh, at least the official one doesn't fall off all the time...
Sent from my ONEPLUS A3003 using Tapatalk

FYI: Complained about the garbage quality through Amazon and got my money back.
Time to find a better glass protector now.

i got a casebase protector but havent removed the protector that comes with it, should i try the casebase or is everyone going back to standard protectors since these full coverage ones arent cutting it?

merewood bebox said:
i got a casebase protector but havent removed the protector that comes with it, should i try the casebase or is everyone going back to standard protectors since these full coverage ones arent cutting it?
Click to expand...
Click to collapse
As far as I can tell , the Case base is identical to Orzly so honestly, I would just keep the one that came with the phone and send it back.

Rattles said:
As far as I can tell , the Case base is identical to Orzly so honestly, I would just keep the one that came with the phone and send it back.
Click to expand...
Click to collapse
Alight so what you planning to use now, there's not much Choce for this phone now that I i think about it

Thank you
You just saved me man, I was about to order after reading the post.
Rattles said:
thanks for the review but before people run out to buy one based on this review, a few things i feel should be mentioned:
1) this Orzly protector does NOT work with a lot of cases. if you have a case that covers the sides but doesn't go over the glass, it will push and lift the Orzly. if you do have a case that fits snug, it will push in the glass and create weird color marks.
2) the protector has dots on it that are clearly visible in direct sunlight and quite frankly, make the screen look like crap.
3) the protector is a smudge/fingerprint magnet!!!
4) because it doesn't quite stick to the screen, unless the sides are fully covered by a case, you will get dust inside.
5) i did notice a slight touch response degradation but its not major.
my conclusion: Orzly dropped the ball on this one. i had their protector on the One and the Two and they were incredible but the one for the Three is a mess and i will be asking for my money back.
Click to expand...
Click to collapse

I installed mine and I like it. I'm pretty ocd about acreen protectors too...no gap under acreen, and I use the oneplus sandstone snap case and it doesn't touch the protector. Only fault is the dang rate it picks up fingerprints. I can see the dots underneath, but only in sunlight...that not an issue at all. I tried about 3 different ones odd of Amazon before I left this one on.
Sent from my ONEPLUS A3000 using XDA-Developers mobile app

Any Full Body Cases With Built-In Screen Protectors (With Good Responsiveness)?

Are there any full body cases, which offer good protection, with built-in screen protectors that don't negatively effect the screen's responsiveness?
I currently have the i-Blason Ares case. And, while I like the case, and its slimness, the built-in screen protector makes the phone very difficult to use.
Thank you.

Dankees said:
Are there any full body cases, which offer good protection, with built-in screen protectors that don't negatively effect the screen's responsiveness?
I currently have the i-Blason Ares case. And, while I like the case, and its slimness, the built-in screen protector makes the phone very difficult to use.
Thank you.
Click to expand...
Click to collapse
Try the supcase unicorn beetle
Sent from my Pixel 2 XL using Tapatalk

browniegirl said:
Try the supcase unicorn beetle
Sent from my Pixel 2 XL using Tapatalk
Click to expand...
Click to collapse
I used that on my Note 4, but the Note 8 has a curved screen, so how is the SUPCASE with the curved screen?

For me the Supcase Unicorn Beetle is the perfect Case.

browniegirl said:
Try the supcase unicorn beetle
Click to expand...
Click to collapse
Tanis64 said:
For me the Supcase Unicorn Beetle is the perfect Case.
Click to expand...
Click to collapse
I'd have to disagree with this, the responsiveness for me with the Beetle was pretty bad especially when using the keyboard towards the middle of the screen. On the sides of the curved screen the case fit much more "tight" and seemed great but towards the middle it was horrible. I became annoyed with it within 24 hours and popped it out and installed the Skinomi wet install (case friendly) protector which fits great with the Beetle.

xbmoyx said:
I'd have to disagree with this, the responsiveness for me with the Beetle was pretty bad especially when using the keyboard towards the middle of the screen. On the sides of the curved screen the case fit much more "tight" and seemed great but towards the middle it was horrible. I became annoyed with it within 24 hours and popped it out and installed the Skinomi wet install (case friendly) protector which fits great with the Beetle.
Click to expand...
Click to collapse
For me there are nearly no problems with responsiness, maybe because i used a similar case for my former S4 Device and so i subliminally use it with a little more of force.

Tanis64 said:
For me there are nearly no problems with responsiness, maybe because i used a similar case for my former S4 Device and so i subliminally use it with a little more of force.
Click to expand...
Click to collapse
Perhaps it's worth trying and returning if it's defective.

My mother uses this and she thinks it is fine but bulky..
i-Blason Galaxy Note 8 Case, [Heavy Duty Protection] [Clear Back] [Magma Series] Shock Reduction / Full body Bumper Case with Built-in Screen Protector for Samsung Galaxy Note 8 2017 (Black) https://www.amazon.com/dp/B074W3WBVC/ref=cm_sw_r_cp_apa_uldiAbSN4EFZ8
Note: This has a Plastic Screen Protector with the Dot Matrix just like most of the Tempered Glass Screen protectors for the Note 8.
I, on the other use an X-Doria Defense Case (Carbon Fiber look case) + this so-so Tempered glass screen protector with the notch. I am somewhat regretting my decision.

Do most of the built in screen protectors suffer with dust ect getting underneath the protector?
I've tried both wet and glass with my spiegen tough Amor case and not happy with anything so looking at maybe getting something like this in the op

You can also try Poetic Guardian. Front cover has protective film (strong one, but not a glass or plastic strong). I was fairly surprised with how responsive it is. Just a minor loss at the bottom, really nothing to much.
Cheers,
Alex
Sent from my SM-N950F using Tapatalk

Just got the poetic revolution just question has anyone applied a full cover glass screen protector and pipped the one that come with the case off as it's kind of rubbish
Main question is would the from of the case still fit on?

Anyone have first hand/personal experience with the i-blason magma case and can vouch for its sensitivity with and without s pen use? Thanks

I use a poetic guardian but I removed the plastic screen protector as I found it was more difficult to use the screen.
I used to have one of the full screen glass protectors on but I found they were not always sticking on correctly.
So now I use both. The guardian with the plastic screen removed sits over the glass screen with the added bonus of keeping it fixed as the case front covers some of the protector at the top and bottom so keeps it held down.
So far out of all I have used this is by far the best option and even poetic themselves suggested this.
Sent from my [device_name] using XDA-Developers Legacy app

machmandp said:
I use a poetic guardian but I removed the plastic screen protector as I found it was more difficult to use the screen.
I used to have one of the full screen glass protectors on but I found they were not always sticking on correctly.
So now I use both. The guardian with the plastic screen recovered sits over the glass screen with the added bonus of keeping it fixed as the case front covers some of the protector at the top and bottom so keeps it held down.
So far out of all I have used this is by far the best option and even poetic themselves suggested this.
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
Hi I have the poetic revolution and was thinking about this as the built in protector isn't very good what screen protector are you using and do you have any pics
Thanks
---------- Post added at 11:39 AM ---------- Previous post was at 11:37 AM ----------
machmandp said:
I use a poetic guardian but I removed the plastic screen protector as I found it was more difficult to use the screen.
I used to have one of the full screen glass protectors on but I found they were not always sticking on correctly.
So now I use both. The guardian with the plastic screen recovered sits over the glass screen with the added bonus of keeping it fixed as the case front covers some of the protector at the top and bottom so keeps it held down.
So far out of all I have used this is by far the best option and even poetic themselves suggested this.
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
Hi I have the poetic revolution and was thinking about taking out the protector what protector you using and do you have any pics
Thanks

brockyneo said:
Hi I have the poetic revolution and was thinking about this as the built in protector isn't very good what screen protector are you using and do you have any pics
Thanks
---------- Post added at 11:39 AM ---------- Previous post was at 11:37 AM ----------
Hi I have the poetic revolution and was thinking about taking out the protector what protector you using and do you have any pics
Thanks
Click to expand...
Click to collapse
Here is a pic (not great but you can se how it fits)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
https://i.imgur.com/jJYb0af.jpg
The screen protector is like the one here
https://www.ebay.co.uk/itm/Samsung-Galaxy-Note-8-Case-Friendly-3D-Full-Tempered-Glass-Film-Screen-Protector/253253647292?_trkparms=aid%3D555017%26algo%3DPL.CASSINI%26ao%3D2%26asc%3D20151005190540%26meid%3Dff5ba532a7024c379424a67892962373%26pid%3D100505%26rk%3D1%26rkt%3D1%26&_trksid=p2045573.c100505.m3226
I found it best to get the protector with the black surround as it does still look part of the case and its much easier to line it up
When you remove the original terrible screen protector from the case just make sure that you get all of the adhesive off (it just pulls off easily)
Hope this helps

machmandp said:
Here is a pic (not great but you can se how it fits)
The screen protector is like the one here
https://www.ebay.co.uk/itm/Samsung-Galaxy-Note-8-Case-Friendly-3D-Full-Tempered-Glass-Film-Screen-Protector/253253647292?_trkparms=aid%3D555017%26algo%3DPL.CASSINI%26ao%3D2%26asc%3D20151005190540%26meid%3Dff5ba532a7024c379424a67892962373%26pid%3D100505%26rk%3D1%26rkt%3D1%26&_trksid=p2045573.c100505.m3226
I found it best to get the protector with the black surround as it does still look part of the case and its much easier to line it up
When you remove the original terrible screen protector from the case just make sure that you get all of the adhesive off (it just pulls off easily)
Hope this helps
Click to expand...
Click to collapse
Thanks I'll buy one and take a look do you think the frame is strong enough to keep the protector down from dust getting under ect

brockyneo said:
Thanks I'll buy one and take a look do you think the frame is strong enough to keep the protector down from dust getting under ect
Click to expand...
Click to collapse
Yes because the screen protector has the sticky sides anyway the case just makes sure its always stuck down
so far no dust under the protector , but i do get some under the rear back part by the camera and finger sensor but i can assume you already see that with yours

machmandp said:
Yes because the screen protector has the sticky sides anyway the case just makes sure its always stuck down
so far no dust under the protector , but i do get some under the rear back part by the camera and finger sensor but i can assume you already see that with yours
Click to expand...
Click to collapse
Thanks just ordered the screen protector should be here tomorrow lol just a question does the case still clip onto the front part of the case and clip in all alone ok with the extra thickness of the screen protector
Thanks

Yes no problems exactly as before
Sent from my [device_name] using XDA-Developers Legacy app

machmandp said:
Yes no problems exactly as before
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
Well finally fitted and a lot better now then the fitted screen protector feels nice to be touching glass again only thing is the protector I bought seems to be poor quality I'll wait till after Christmas and look at buying a better one
But after owning the s8 plus and now the note 8 and around 20 screen protectors including the whitestone I think this is up to now the best option
Do miss my spigen tough Amor but this is the best option up to now

Ringke Invisible Defender (tempered glass) + Ringke Fusion-X (casing)

I initially planned to only buy the casing from Ringke since I prefer how it looks compared to Spigen's. However, I then noticed that Ringke also produced tempred glass for Poco F1, so I ordered them both and have been using them for several days now.
Ringke Invisible Defender - tempered glass
This one came a couple days earlier than the case, so I have it on first while using the default casing.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here are some of my thoughts:
There's not much of a problem precision-wise, the top and bottom part are well covered, the glass went way over the screen and into the bezel (Image A)
The side part is covered very precisely and didn't go over to the bezel part, too tight that for me it led to the issue below (Image B)
When in the dark, tilting the phone to the side reveal this rainbowish lines (Image C)
Using only the default slim casing, you can feel the edges of the glass are somewhat rough. The Ringke case below fixes this issue for me though, as the case cuts higher than the glass so it covers the rough gap. Ringke did explained on the product's page about having inevitable lifted sides due to the curved nature of the phone screen, so this might be the reason of that rough edge.
Ringke Fusion-X Casing
I've never use Ringke products prior to this phone, the packaging of the casing is somewhat minimalist. When applied to the phone, however, it feels satisfyingly fit to the phone. I have no complaint with the precision so far.

One more thing on the tempered glass: No oleophobic coating, it's a fingerprint magnet

Im fine with ringke fusion X case and Nillkin tempered glass.eeheheh. paired with a ringke strap

philsuf said:
One more thing on the tempered glass: No oleophobic coating, it's a fingerprint magnet
Click to expand...
Click to collapse
Thank you for this wonderful post I am planning to buy ringke case....I am using poco since past 5 months with default tpu case, now it is turning yellowish brown like tpu cases do after a while.... Can you tell me what is the material on the transparent back of rinkey case ? And please tell if it gets scratches after usage of few months.....
Also did you find a tempered glass with decent olephobic coating and also which is not a rip off. I'm happy with my current one, only one issue that it is a finger print magnet too.....The screen looks dirty when phone is locked and I have to constantly wipe it to keep it clean

Kobra.shady said:
Thank you for this wonderful post I am planning to buy ringke case....I am using poco since past 5 months with default tpu case, now it is turning yellowish brown like tpu cases do after a while.... Can you tell me what is the material on the transparent back of rinkey case ? And please tell if it gets scratches after usage of few months.....
Also did you find a tempered glass with decent olephobic coating and also which is not a rip off. I'm happy with my current one, only one issue that it is a finger print magnet too.....The screen looks dirty when phone is locked and I have to constantly wipe it to keep it clean
Click to expand...
Click to collapse
After 2 months of usage, no scratches yet. But I can't confirm on the back side material, my guess would be that it is plastic. So far I am really happy with the case, but not so much with the glass.
I still stick with the Ringke glass. My workaround is to coat it again with a liquid glass protection, just the cheap one. It isn't exactly fingerprint proof, but much better than using just the tempered glass.
Sent from my [device_name] using XDA-Developers Legacy app

philsuf said:
After 2 months of usage, no scratches yet. But I can't confirm on the back side material, my guess would be that it is plastic. So far I am really happy with the case, but not so much with the glass.
I still stick with the Ringke glass. My workaround is to coat it again with a liquid glass protection, just the cheap one. It isn't exactly fingerprint proof, but much better than using just the tempered glass.
Click to expand...
Click to collapse
Cool n thanks for quick reply...if you bought that liq glass protection online...can u please send me the link, I'll really appreciate it ?
And I was just worried about scratches on the back panel, since yours is okay so now I will happily buy Ringke case ?
And for the tempered glass I need to find something.... Hopefully that solution you are using will help.. because online if you buy tempered glass they say it has olephobic coating and anti finger print in product description but mostly it's just gimmick ??
C this is how smugged my phone gets....And it may look that I have touched it with oily figures, but trust me that ain't the case

Kobra.shady said:
Cool n thanks for quick reply...if you bought that liq glass protection online...can u please send me the link, I'll really appreciate it
And I was just worried about scratches on the back panel, since yours is okay so now I will happily buy Ringke case
And for the tempered glass I need to find something.... Hopefully that solution you are using will help.. because online if you buy tempered glass they say it has olephobic coating and anti finger print in product description but mostly it's just gimmick
C this is how smugged my phone gets....And it may look that I have touched it with oily figures, but trust me that ain't the case
Click to expand...
Click to collapse
It looks not good but the glass seems very protective!!
It covers very well!! :good:

Kobra.shady said:
Cool n thanks for quick reply...if you bought that liq glass protection online...can u please send me the link, I'll really appreciate it [emoji4]
And I was just worried about scratches on the back panel, since yours is okay so now I will happily buy Ringke case [emoji3]
And for the tempered glass I need to find something.... Hopefully that solution you are using will help.. because online if you buy tempered glass they say it has olephobic coating and anti finger print in product description but mostly it's just gimmick [emoji51][emoji14]
C this is how smugged my phone gets....And it may look that I have touched it with oily figures, but trust me that ain't the case
Click to expand...
Click to collapse
No problem, happy to help. However, I can't help you with the link, as I don't think any store here (Indonesia) will ship overseas.
Whoa, that is a really bad case of prints you got there. When I said my glass is fingerprint magnet (before I put liquid coating), it actually wasn't even half as bad as yours!
Anyway, I am using this liquid to make up for that problem:
https://shopee.co.id/novanrara22/1435201737?version=d8a482c89f545d4b74c105cce349c2ba
Cost me less than a couple of dollars
Sent from my [device_name] using XDA-Developers Legacy app

penna_85 said:
It looks not good but the glass seems very protective!!
It covers very well!! :good:
Click to expand...
Click to collapse
Yup it's very protective, doesn't block any part of screen or notch display, but yes only issue is finger print marks...rest I am happy with it..
---------- Post added at 12:28 PM ---------- Previous post was at 12:25 PM ----------
philsuf said:
No problem, happy to help. However, I can't help you with the link, as I don't think any store here (Indonesia) will ship overseas.
Whoa, that is a really bad case of prints you got there. When I said my glass is fingerprint magnet (before I put liquid coating), it actually wasn't even half as bad as yours!
Anyway, I am using this liquid to make up for that problem:
https://shopee.co.id/novanrara22/1435201737?version=d8a482c89f545d4b74c105cce349c2ba
Cost me less than a couple of dollars
Click to expand...
Click to collapse
?? Told you it's really annoying, I have to keep wiping my screen after few hours or it looks quite dirty...I will try to find similar kind of solution here, or get tempered glass from local market instead of online, because online u can not be sure ? even this tempered said "anti figure print" ????