Database Develop

Best tempered glass screen protector?

Just got an M8 and looking for opinions on the best tempered glass screen protector out for it. I don't care much about compatibility with dot view case as I most likely wont be getting that case. Sorry if it's been discussed before.

sco77 said:
Just got an M8 and looking for opinions on the best tempered glass screen protector out for it. I don't care much about compatibility with dot view case as I most likely wont be getting that case. Sorry if it's been discussed before.
Click to expand...
Click to collapse
I got the one they sold at verizon wireless. I love it it clean, dont hold finger prints as much, and hard to break. I have dropped my phone mant time the screen (im military) and it has no scratches or cracks

jay8302 said:
I got the one they sold at verizon wireless. I love it it clean, dont hold finger prints as much, and hard to break. I have dropped my phone mant time the screen (im military) and it has no scratches or cracks
Click to expand...
Click to collapse
Mime feather is very good but the edges might chip a little is you hit them, it repels finger prints very well and leaves no bubbles or lifted edges. But the best part is that it feels smother than the devices glass and has perfect clarity. Great company with great warranty and service. http://mimeusa.com/product/htc-one-m8-feather-glass-screen-protector/

I have always went with iloome products. Never had a problem. http://www.iloome.com/HTC-One-Screen-Protector-Tempered/dp/B00JAKDL52
Sent from my Insanely powered M8 using Tapatalk

Would advise against the Mime Feather. Chips and scratches far too easily.
I've spent a lot of time in the screen protector thread on here and been through several tempered glass protectors myself including both Mime Ghost and Feather and in all honesty the best one I've found, and many agree, is the Nillkin one. Added bonus it comes with camera protectors too.
That said, I'm currently waiting on GLASS-M which is a 0.15mm offering similar to the Feather from Mime. Hoping that is a good product as I really want a 0.15mm protector for when I want to use the Dot View case as regular 0.33mm ones are too thick.
Sent from my HTC One_M8 using Tapatalk

I usually ignore posts like mine but.... I have the Nillkin Tempered Glass screen protector with rounded edges and its sublime. It comes securely packaged in a nice box which contains a plethora of wipes and anti static films which ensure a flawless installation, it was easy for me with the hinge method and I didn`t get any of the cobweb effects or poor adhesive issues as some people have reported. The glass is very smooth with an oleophobic coating. It is much smoother than the stock glass and whilst it still gets fingerprints it`s really easy to wipe them off usually with a single swipe. Overall I can`t say enough good things about it since it was just over $10 aud shipped. I will stress that I haven`t tried any other brands, but I can`t imagine them being better to the extent that they warrant the 3x price difference, support and free replacements may be the only benefit and again that`s not a given. 10/10 for me, excellent packaging, smooth installation, great product and no defects/chipping corners, etc.

ryanjsoo said:
I usually ignore posts like mine but.... I have the Nillkin Tempered Glass screen protector with rounded edges and its sublime. It comes securely packaged in a nice box which contains a plethora of wipes and anti static films which ensure a flawless installation, it was easy for me with the hinge method and I didn`t get any of the cobweb effects or poor adhesive issues as some people have reported. The glass is very smooth with an oleophobic coating. It is much smoother than the stock glass and whilst it still gets fingerprints it`s really easy to wipe them off usually with a single swipe. Overall I can`t say enough good things about it since it was just over $10 aud shipped. I will stress that I haven`t tried any other brands, but I can`t imagine them being better to the extent that they warrant the 3x price difference, support and free replacements may be the only benefit and again that`s not a given. 10/10 for me, excellent packaging, smooth installation, great product and no defects/chipping corners, etc.
Click to expand...
Click to collapse
can also recommend Nilkin using it for a week so far and its great

ryanjsoo said:
I usually ignore posts like mine but.... I have the Nillkin Tempered Glass screen protector with rounded edges and its sublime. It comes securely packaged in a nice box which contains a plethora of wipes and anti static films which ensure a flawless installation, it was easy for me with the hinge method and I didn`t get any of the cobweb effects or poor adhesive issues as some people have reported. The glass is very smooth with an oleophobic coating. It is much smoother than the stock glass and whilst it still gets fingerprints it`s really easy to wipe them off usually with a single swipe. Overall I can`t say enough good things about it since it was just over $10 aud shipped. I will stress that I haven`t tried any other brands, but I can`t imagine them being better to the extent that they warrant the 3x price difference, support and free replacements may be the only benefit and again that`s not a given. 10/10 for me, excellent packaging, smooth installation, great product and no defects/chipping corners, etc.
Click to expand...
Click to collapse
Could you share a link from eBay or something else? Thank you in advance

Case
I have been using the Spigen Slim Armor case for my M8 which I love...I wonder if this glass protector would work with it. Anyone have any experience?

scott500 said:
I have been using the Spigen Slim Armor case for my M8 which I love...I wonder if this glass protector would work with it. Anyone have any experience?
Click to expand...
Click to collapse
I'm using the slim armor case with iloome glass screen and it fits perfect.
Sent from my Insanely powered M8 using Tapatalk

Slim Armor with Nilkin
scott500 said:
I have been using the Spigen Slim Armor case for my M8 which I love...I wonder if this glass protector would work with it. Anyone have any experience?
Click to expand...
Click to collapse
I have this exact combo (Slim Armor + Nilkin Glass with rounded edges) and can confirm that it works perfectly. Can post a picture in the morning if you're interested (going to bed now - late here in Brisbane Australia!)
The combo of Supcase Beetle and Nilkin also works perfectly.

Zagg Glass
I've been using the Zagg Glass screen protector for a couple of months...no chips, no scratches...looks like new.

Chris_c81 said:
Would advise against the Mime Feather. Chips and scratches far too easily.
I've spent a lot of time in the screen protector thread on here and been through several tempered glass protectors myself including both Mime Ghost and Feather and in all honesty the best one I've found, and many agree, is the Nillkin one. Added bonus it comes with camera protectors too.
That said, I'm currently waiting on GLASS-M which is a 0.15mm offering similar to the Feather from Mime. Hoping that is a good product as I really want a 0.15mm protector for when I want to use the Dot View case as regular 0.33mm ones are too thick.
Sent from my HTC One_M8 using Tapatalk
Click to expand...
Click to collapse
The mime is not as bad as you say I only have two very minor chips that were my fault after almost two months. But it is so worth it because it is only .15mm

rogsoccerman said:
The mime is not as bad as you say I only have two very minor chips that were my fault after almost two months. But it is so worth it because it is only .15mm
Click to expand...
Click to collapse
It is in my experience, with not only the Feather but the Ghost. If you search through:
http://forum.xda-developers.com/showthread.php?t=2691879
You'll find others who have had similar issues too.
I wouldn't touch MIME ever again. Not when you consider the higher premium price you pay, you'd expect superior quality. But that just isn't the case.
Sent from my HTC One_M8 using Tapatalk

benandfaith said:
I have this exact combo (Slim Armor + Nilkin Glass with rounded edges) and can confirm that it works perfectly. Can post a picture in the morning if you're interested (going to bed now - late here in Brisbane Australia!)
The combo of Supcase Beetle and Nilkin also works perfectly.
Click to expand...
Click to collapse
That would be helpful..thank you!

I use xtremegaurd, it's $6 with an 85% off coupon, works good, cheap as hell, and honestly just as good as the others but it's a TAD bit thicker and smudges a bit. But if you just want glass, go with xtremegaurd. You won't be disappointed

Slim Armor and Supcase Beetle with Nilkin Glass
scott500 said:
That would be helpful..thank you!
Click to expand...
Click to collapse
Glass protector is this one: http://www.ebay.com.au/itm/Genuine-Nillkin-9H-R-Tempered-Glass-Film-Screen-guard-protector-for-HTC-One-M8-/111340407992?pt=AU_MobilePhoneAccessories&hash=item19ec67ccb8&_uhb=1
Slim Armor + Nillkin
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Supcase Beetle + Nillkin

benandfaith said:
Glass protector is this one: http://www.ebay.com.au/itm/Genuine-...lePhoneAccessories&hash=item19ec67ccb8&_uhb=1
Slim Armor + Nillkin
Supcase Beetle + Nillkin
Click to expand...
Click to collapse
Thank you very much. Looks great

benandfaith said:
Glass protector is this one: http://www.ebay.com.au/itm/Genuine-Nillkin-9H-R-Tempered-Glass-Film-Screen-guard-protector-for-HTC-One-M8-/111340407992?pt=AU_MobilePhoneAccessories&hash=item19ec67ccb8&_uhb=1
Thank you for taking the time to post those pics with the cases. Just placed my order.
Click to expand...
Click to collapse

tpal12 said:
Thank you very much. Looks great
Click to expand...
Click to collapse
scott500 said:
Thank you for taking the time to post those pics with the cases. Just placed my order.
Click to expand...
Click to collapse
You're more than welcome.
Hope it works out for you. I found installation pretty easy also... certainly easier than the normal screen protectors.

Orzly Tempered Glass Screen Protector [Small review]

The Orzly Tempered Glass Screen Protector. I used 3 of them on my 1+1 and they did their job perfectly, not a scratch on the screen even when I sometimes thought it was done for. So after ordering my 1+3 i first bought the tempered glass screen protector from Oneplus. Huge mistake. Hands down the worst screen protector i used so far. So almost immediately i ordered myself a trusted Orzly screen protector.
Installation:
Installation of the screen protector was quick and easy. I guess the procedure is about the same for every screen protector out there but still.. The only problem is that even i wiped the screen clean with the cloth etc. But still i managed to get a spec of dust on the screen which really annoys me. I guess i'll just buy another one
Conclusion:
Great screen protector, does the job perfectly. I hope i don't need to replace it any time soon.
Pictures:
As you can see on the picture below, the screen protector from Oneplus isn't all that good...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
However the Orzly one:

thanks for the review but before people run out to buy one based on this review, a few things i feel should be mentioned:
1) this Orzly protector does NOT work with a lot of cases. if you have a case that covers the sides but doesn't go over the glass, it will push and lift the Orzly. if you do have a case that fits snug, it will push in the glass and create weird color marks.
2) the protector has dots on it that are clearly visible in direct sunlight and quite frankly, make the screen look like crap.
3) the protector is a smudge/fingerprint magnet!!!
4) because it doesn't quite stick to the screen, unless the sides are fully covered by a case, you will get dust inside.
5) i did notice a slight touch response degradation but its not major.
my conclusion: Orzly dropped the ball on this one. i had their protector on the One and the Two and they were incredible but the one for the Three is a mess and i will be asking for my money back.

I can only confirm it. I'm very disappointed with Orzly tgsp. It doesn't work with orzly flex case. Matrix dots are very annoying, so far it's the worst screen protector I purchased.
Wysłane ze zmywarki

Rattles said:
thanks for the review but before people run out to buy one based on this review, a few things i feel should be mentioned:
1) this Orzly protector does NOT work with a lot of cases. if you have a case that covers the sides but doesn't go over the glass, it will push and lift the Orzly. if you do have a case that fits snug, it will push in the glass and create weird color marks.
2) the protector has dots on it that are clearly visible in direct sunlight and quite frankly, make the screen look like crap.
3) the protector is a smudge/fingerprint magnet!!!
4) because it doesn't quite stick to the screen, unless the sides are fully covered by a case, you will get dust inside.
5) i did notice a slight touch response degradation but its not major.
my conclusion: Orzly dropped the ball on this one. i had their protector on the One and the Two and they were incredible but the one for the Three is a mess and i will be asking for my money back.
Click to expand...
Click to collapse
Completely agree Rattles, this screen protector doesn't fit with Orzly's own Grip Pro case. For me the touch response degradation was so bad, I removed the screen protector after less than 24 hours with it fitted and fitted it to the inside of my bin.
Personally, I think that this screen protector is utter trash.

I second the negative experience with the Orzly TGSP, which is quite a bummer. I had very good experience with their TGSP on previous devices, but I guess the curved screen made them make a bad deciscion to go with the black bordered one.

Rattles said:
2) the protector has dots on it that are clearly visible in direct sunlight and quite frankly, make the screen look like crap.
3) the protector is a smudge/fingerprint magnet!!!
4) because it doesn't quite stick to the screen, unless the sides are fully covered by a case, you will get dust inside.
5) i did notice a slight touch response degradation but its not major.
Click to expand...
Click to collapse
I am pretty happy with the Orzly which I use with a sandstone case.
2) Dots are only visible under certain circumstances, but it is rare, in my case 99% of the time not visible. I already forgot about them.
3) Agree, it is a fingerprint magnet. But also easier to clean than the original screen protector.
5) Didn't notice any touch response degradation and must state that thanks to a more slippery surface the fingers slide better which for me is a big plus.

Although it fits perfect and the dot matrix doesn't bother me but dust entered the screen protector after a week even though I was using a case.

Very disappointed with orzly. Not 2.5d at all. Glass is bigger than screen and there are a lot of dust in the gap. Dots are visible quite often. Doesn't stick well.. Hate it.

Bought and discarded the protector after one day of use. For all the points mentioned by many above. Waste of money.
Sent from my ONEPLUS A3003 using Tapatalk

robthebass said:
I am pretty happy with the Orzly which I use with a sandstone case.
2) Dots are only visible under certain circumstances, but it is rare, in my case 99% of the time not visible. I already forgot about them.
3) Agree, it is a fingerprint magnet. But also easier to clean than the original screen protector.
5) Didn't notice any touch response degradation and must state that thanks to a more slippery surface the fingers slide better which for me is a big plus.
Click to expand...
Click to collapse
ushpiy said:
Although it fits perfect and the dot matrix doesn't bother me but dust entered the screen protector after a week even though I was using a case.
Click to expand...
Click to collapse
Yes, i agree. The dots are only visible in direct sunlight. That still so many have bad experience with this tgsp. I really like it!

Just to add one more negative thing: the Protector is very reflective (compared to other tempered glass protectors and stock Display). Hence outdoor usage is limited.
Gesendet von meinem ONEPLUS A3003 mit Tapatalk

I also have this one and I'm super disappointed.
I mean, why don't they just make it translucent? And why is there no glue on the glass? It lifts off even without a case...
Also the cutouts aren't perfect, while the camera and speaker ones fit perfectly I only see half of the buttons. And those fingerprints!
Really, even the pre-applied protector from OnePlus was better.

I can confirm all these flaws. Anyone got a recommendation for a good one? The official oneplus one is back in stores, so I maybe just end up buying this.

I threw it away as well. It was worse than the official one tbh, at least the official one doesn't fall off all the time...
Sent from my ONEPLUS A3003 using Tapatalk

FYI: Complained about the garbage quality through Amazon and got my money back.
Time to find a better glass protector now.

i got a casebase protector but havent removed the protector that comes with it, should i try the casebase or is everyone going back to standard protectors since these full coverage ones arent cutting it?

merewood bebox said:
i got a casebase protector but havent removed the protector that comes with it, should i try the casebase or is everyone going back to standard protectors since these full coverage ones arent cutting it?
Click to expand...
Click to collapse
As far as I can tell , the Case base is identical to Orzly so honestly, I would just keep the one that came with the phone and send it back.

Rattles said:
As far as I can tell , the Case base is identical to Orzly so honestly, I would just keep the one that came with the phone and send it back.
Click to expand...
Click to collapse
Alight so what you planning to use now, there's not much Choce for this phone now that I i think about it

Thank you
You just saved me man, I was about to order after reading the post.
Rattles said:
thanks for the review but before people run out to buy one based on this review, a few things i feel should be mentioned:
1) this Orzly protector does NOT work with a lot of cases. if you have a case that covers the sides but doesn't go over the glass, it will push and lift the Orzly. if you do have a case that fits snug, it will push in the glass and create weird color marks.
2) the protector has dots on it that are clearly visible in direct sunlight and quite frankly, make the screen look like crap.
3) the protector is a smudge/fingerprint magnet!!!
4) because it doesn't quite stick to the screen, unless the sides are fully covered by a case, you will get dust inside.
5) i did notice a slight touch response degradation but its not major.
my conclusion: Orzly dropped the ball on this one. i had their protector on the One and the Two and they were incredible but the one for the Three is a mess and i will be asking for my money back.
Click to expand...
Click to collapse

I installed mine and I like it. I'm pretty ocd about acreen protectors too...no gap under acreen, and I use the oneplus sandstone snap case and it doesn't touch the protector. Only fault is the dang rate it picks up fingerprints. I can see the dots underneath, but only in sunlight...that not an issue at all. I tried about 3 different ones odd of Amazon before I left this one on.
Sent from my ONEPLUS A3000 using XDA-Developers mobile app

OnePlus 3 Tempered Glass suggestion

I live in desert area and there literally unlimited amount of sand everywhere!
can anyone suggest me a good tempered glass? I have checked some on amazon but reviews says they suck!

I have had two different TGSP now and they both End up the same. Does not stick to the edges due to the curved screen. But mine does not Collect lint at all even though it does not adhere to the screen.
I have not tested orzly or similar but they seem to work bad with cases so.. heard though that orzly were coming with a new model soon that is slimmer.

Tried a few, all junk.. Until i bought the orzly brand. The one with the black tinted frame.
I could be lucky but It fits perfectly, stick securely to the screen and is now holding for 10days of very heavy use without a scratch or bubble or anything.! Can be used with the original sandstone cover and does cover the whole screen!

w3bureau said:
Tried a few, all junk.. Until i bought the orzly brand. The one with the black tinted frame.
I could be lucky but It fits perfectly, stick securely to the screen and is now holding for 10days of very heavy use without a scratch or bubble or anything.! Can be used with the original sandstone cover and does cover the whole screen!
Click to expand...
Click to collapse
Pictures and link to the specific protector you use? Would it work with cases with a lip around the front screen?

I ordered one similar. Is it easy to apply? your general thoughts on clarity, touch, etc?

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Avoid at any cost!!!
This is why...
Regards
Goran
Sent from my ONEPLUS A3003 using XDA-Developers mobile app

I'm using Nillking 9H+Pro TGSP and I find it really REALLY nice. Little halo effect on both sides but is Silky smooth and covers a great part of the screen

lparcshinoda said:
I'm using Nillking 9H+Pro TGSP and I find it really REALLY nice. Little halo effect on both sides but is Silky smooth and covers a great part of the screen
Click to expand...
Click to collapse
Can you post pictures of it. How bad is the halo?

lparcshinoda said:
I'm using Nillking 9H+Pro TGSP and I find it really REALLY nice. Little halo effect on both sides but is Silky smooth and covers a great part of the screen
Click to expand...
Click to collapse
I think it is the best for phones with cases even though there are issues with the "Halo" and it doesn't go edge to edge. The edge to edge or full coverage tgsp pull up with cases.
Sent from my ONEPLUS A3000 using Tapatalk

Hopefully this helps for Orzly Case Compatibility:
https://youtu.be/8Je-Ug0hM3E

Clarkkent434 said:
Can you post pictures of it. How bad is the halo?
Click to expand...
Click to collapse
It depends on how you are aligning the TGSP. For my personal preference I've installed it a little more towards the left side to maintain perfect readability and on the left I can see 1.5 mm halo effect that is like some 2.D visual bending effect. With the screen on you notice a some small rainbow effect but that is the only noticeable distortion. I will send some picture later

Has anyone tried the TGSP from OnePlus? Does seem to be on the pricier side, but since it's from OP, it shouldn't have any problems with fitting at least

lparcshinoda said:
I'm using Nillking 9H+Pro TGSP and I find it really REALLY nice. Little halo effect on both sides but is Silky smooth and covers a great part of the screen
Click to expand...
Click to collapse
This is like the only quality tgsp available in my area, so can you tell me, does it fit with casings like the tudia merge? Cause I'm thinking of buying/

Using Nilkin Amazing H+ PRO. It doesn't stick all the way because of the curved screen but it doesn't colect dust in those gaps. Actually no glass for OP3 sticks to the very end. It's all transparent (no black areas), and covers the front camera.
I saw this review and went for it. Can confirm that everything in the video is true.
EDIT: Can't confirm any compatibility with cases since I don't have and don't use any.

EDIT: Got a refund, the glass started to completely come off the top of the phone, and what with covering the notification light and a bit of the front-facing camera, that was the end of it.
I put the Pleison tempered glass protector on my OP3 yesterday; it's the 'new version' screen protector found on Amazon. It's OK, it covers the screen (I've also got it in a Spigen Neo Hybrid case), but the cutout for the front-facing cam isn't exact, there's a bit of 'shadow' on the right-side of the cam when you go to take a picture/video chat/etc. It also completely blocks the notification light, which is a PITA.
The top of the protector isn't 100% adherent to the screen, there's just a tiny bit of gappage that you can feel. Also, it makes it a little less than responsive when swiping down to open up the status bar/Notification Bar, you have to make sure to press a little harder than you normally would.
There was a little 'rainbow' effect going on when I first installed it, but that went away by the end of the day. All in all it seems like one of the better protectors out there, given Amazon reviews, but I don't think any company's got it down 100% yet. I have no idea why......
---------- Post added at 09:23 AM ---------- Previous post was at 09:20 AM ----------
Tidybeer said:
i hadn't found the tempered glass could cover all the screen, so just bought this full screen protector: http://vifocal.com/tempered-glass-f...e-for-oneplus-3-oneplus-three-smartphone.html
Click to expand...
Click to collapse
Have you received it/put it on yet? If so, how do you like it?

chops650 said:
Has anyone tried the TGSP from OnePlus? Does seem to be on the pricier side, but since it's from OP, it shouldn't have any problems with fitting at least
Click to expand...
Click to collapse
Brought the OnePlus TGSP with the phone a few months ago. The glass is the same size as the film that came with the phone, so it doesn't cover edge to edge. Pretty annoying because there's about 1 mm gap on each side between the edge of the screen and the TGSP. I haven't put it on yet.
It seems like all of the TGSP leave a halo effect based on the reviews.

I am using the Orzly glass and I am not fascinated about it.
Yes it covers the whole screen, yes it is compatible with the original OnePlus Snadstone hard case.
What i don't like is that it collects a lot of fingerprints thus making the screen hellish in direct sunlight. Add this to the clearly visible dots and one of the advantages of OP3 is gone.
I am still researching for a good TGSP and might try the new one from OP.

Tidybeer said:
Has a rainbow effect after full screen cover ... but decent product installation .. .. .. fingerprint magnet.
Click to expand...
Click to collapse
Yeah, I edited my original post; in addition to the blocked notification light and partially-covered front-facing camera, it started coming off the top of the screen even more. Got a refund from Pleson.

Tempered Glass For Oneplus 3/Oneplus Three/A3000 Phone 5.5 Inch High Quality Safety Full Cover Screen Protector Full Screen
http://s.aliexpress.com/MZJZNfmU
oneplus 3 glass tempered one plus 3 full cover mofi original protective glass one plus 3 screen protector ultra thin clear film
http://s.aliexpress.com/maEbyiqe
Is everyone buyed one of this? Feedbacks seems good but someone says there is same problem.

Djalaal said:
This is like the only quality tgsp available in my area, so can you tell me, does it fit with casings like the tudia merge? Cause I'm thinking of buying/
Click to expand...
Click to collapse
it does fit with orzly tpu case and the official karbon case, so it should fit with every other case

Pelosi Sandstone Protective Hard Cover

I searched and did not find a thread on this. I was originally going to opt in to buy the Nillkin slim case but it did not cover the bottom and top parts of the phone.... but this one does! So in case anyone is looking for a slim case, with a great feel to it that adds a bit of grip (due to the sandstone feel), this is the case for you. I have it paired with a BestSkinsEver screen protector and I have no issues with it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Can be bought here. Alternatively, I have seen it for sale on AliExpress as well.

mzkaye729 said:
I searched and did not find a thread on this. I was originally going to opt in to buy the Nillkin slim case but it did not cover the bottom and top parts of the phone.... but this one does! So in case anyone is looking for a slim case, with a great feel to it that adds a bit of grip (due to the sandstone feel), this is the case for you. I have it paired with a BestSkinsEver screen protector and I have no issues with it.
Can be bought here. Alternatively, I have seen it for sale on AliExpress as well.
Click to expand...
Click to collapse
Does it have a lip to protect the front screen?

markusviktorius said:
Does it have a lip to protect the front screen?
Click to expand...
Click to collapse
There is, but it's minimal. Can still feel the "groove" when I run my fingers over the edges and onto the screen itself w/ my screen protector on.

mzkaye729 said:
There is, but it's minimal. Can still feel the "groove" when I run my fingers over the edges and onto the screen itself w/ my screen protector on.
Click to expand...
Click to collapse
I own this case and I've dropped my phone twice on a hard surface and all was well, got an orzly v2 also, I will buy another when it's a bit more worn

Is it better than Spigen ?

@mzkaye729
Can I request that you post some more close up shots of the front of the phone with the case on? I'm particularly interested in how much the lip covers the screen.
I wanted the sandstone case but couldn't justify the price that OnePlus was selling theirs for.
Thanks

Had that cover, its ok, but the only problem I had with it, when removing from pocket, it pulls my pocket out, because it sticks with it.

geekmax said:
Is it better than Spigen ?
Click to expand...
Click to collapse
1) The material is different (TPU vs. hard case).
2) The slim factor is different (the Spigen case is thicker, longer, and wider).
3) The Spigen case will most likely protect more than this Pelosi case.
So if you're going for slim factor, get this case but if you want protection for your phone, I believe you're better off with the Spigen case.

simplyazn04 said:
@mzkaye729
Can I request that you post some more close up shots of the front of the phone with the case on? I'm particularly interested in how much the lip covers the screen.
I wanted the sandstone case but couldn't justify the price that OnePlus was selling theirs for.
Thanks
Click to expand...
Click to collapse
I'll try and take some pictures tonight and upload them so you can see (unless someone gets to do this first before I can).

What is your opinion on the BestSkinsEver screen protector? Is it similar to a regular PET screen protector? How good is the oleophobic coating on it and the translucency of it compared to the stock or third-party screen protectors?

simplyazn04 said:
@mzkaye729
Can I request that you post some more close up shots of the front of the phone with the case on? I'm particularly interested in how much the lip covers the screen.
I wanted the sandstone case but couldn't justify the price that OnePlus was selling theirs for.
Thanks
Click to expand...
Click to collapse
Here you go.

EVR_PR said:
What is your opinion on the BestSkinsEver screen protector? Is it similar to a regular PET screen protector? How good is the oleophobic coating on it and the translucency of it compared to the stock or third-party screen protectors?
Click to expand...
Click to collapse
I am a little biased because I have installed BSE protectors on electronics/phones I have owned, as long as BSE offers the option to as I think it is a fantastic product (good value for the money, shipping is extremely cheap to Toronto, Canada). It's not the same as a regular PET screen protector. I think you're talking about those plastic protectors but I find those scratch easily, and also, the application is different. I have yet to put a deep or noticeable scratch on a BSE skin but again, this depends on how you handle the phones/electronics. I even have this BSE skin on my Pebble watch and that thing takes a beating. Still no scratches visible on the screen protector itself on the watch.
I don't believe there's any oleophobic coating at all on the BSE skin, and if there is, super minimal that I don't even notice it ? With that said, I don't think it's fair for me to comment on the "oleophobic coating" (or maybe lack thereof) because I don't typically handle my phone if I have handled (oily) food. With regular use, I don't notice much fingerprints so it's not something that has jumped out at me.
I have had no issues with yellowing, and the "orange peel" look is VERY VERY minimal compared to something like XtremeGuard (the yellowing issue/orange peel was horrible on that). I had this BSE on my Note 4; had no issue with the S-pen gliding on it. The glossy screen protector from BSE won't cut into the clarity of the phone's display so that's not something to worry about. I have tried glass screen protectors and OK, maybe you can tell side-by-side the difference in clarity by a little bit, but typically, the glass protectors are used for drop protection. I prefer the BSE because the fingerprints on the glass bother me, and my main concern are scratches on the screen, not a shattered screen *knock on wood*.

mzkaye729 said:
Here you go.
Click to expand...
Click to collapse
Thank you so much for taking time out of your day to post this.
Looks like it offers very little protection on the front side though so I will be sticking with my Spigen Rugged. If only this phone was more popular, manufacturers would make more cases. I get jealous of iPhones for having all the cool phone cases.
Thanks again!

Tempered glass screen protector for Xiaomi Mi 6

Did you guys have any luck with screen protectors?
I purchased 2 on gearbest (transparent ones, not the ones with tinted bezels) and they look horrible, all the bezels and around the home button... it looks unsticked due to the slight glass curvature. I'll upload pictures once I can.

I had the same and threw them away 1 minute after installation because they didn't stick near the edges...
So I ordered these on Ali Express. They fit quite well but don't really 'stick' the same way as the thicker ones do on a perfect flat screen so there is a way dust can get under that screen protector...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Search for Nillkin screen protectors. This is the best in my opinion.
https://www.aliexpress.com/wholesal...e_id=AS_20170625020132&SearchText=mi6+nillkin

smooth_gl said:
Search for Nillkin screen protectors. This is the best in my opinion.
https://www.aliexpress.com/wholesal...e_id=AS_20170625020132&SearchText=mi6+nillkin
Click to expand...
Click to collapse
Any pictures to show what it looks like when stuck?

reb00tz said:
Any pictures to show what it looks like when stuck?
Click to expand...
Click to collapse
Here

And this one is from Cafele

smooth_gl said:
Here
Click to expand...
Click to collapse
Thanks! It appears there isn't the ugly edges because it is smaller than the curved parts, but coupled with a good "all around" bumper case, that should suffice...

i use a non brand, from Chinese, tempered glass.
but it's 3D, edge to edge, curved tempered glass, covers fully until the metal sides
it even works perfectly with a case, full protection till the edge of the case
not sure if it can be found outside my country though, since its a no brand thing
can post a pic if you guys want to see

@ ZackoFF96
Could you share a link to a shop where you bought it, please.
Thank you in advance.
+

Hi, I would love to see a pic!
Also how is the glare on it?
It seems strange that high quality screen protectors that cover the whole mi 6 screen are so hard to come by. The ones with the coloured edges are sufficient to cover up the defects around the edges but I find the glare on them terrible.

tkawa said:
@ ZackoFF96
Could you share a link to a shop where you bought it, please.
Thank you in advance.
+
Click to expand...
Click to collapse
ismael94 said:
Hi, I would love to see a pic!
Also how is the glare on it?
It seems strange that high quality screen protectors that cover the whole mi 6 screen are so hard to come by. The ones with the coloured edges are sufficient to cover up the defects around the edges but I find the glare on them terrible.
Click to expand...
Click to collapse
here you go, sorry for late reply, your post didn't appear in my notifications
the case is by cafele, the skin protector is from here
https://www.tokopedia.com/bbgadget/xiaomi-mi6-tempered-glass-3d-full-cover-curved-cnc-cold-carving
https://www.tokopedia.com/bbgadget/cafele-xiaomi-mi6-mi-6-ultra-thin-case-tpu-matte

ZackoFF96 said:
here you go, sorry for late reply, your post didn't appear in my notifications
the case is by cafele, the skin protector is from here
https://www.tokopedia.com/bbgadget/xiaomi-mi6-tempered-glass-3d-full-cover-curved-cnc-cold-carving
https://www.tokopedia.com/bbgadget/cafele-xiaomi-mi6-mi-6-ultra-thin-case-tpu-matte
Click to expand...
Click to collapse
Nice glass protector.
I'm using the Nillkin and it's pretty good also.

i use a non brand, from Chinese, tempered glass.
but it's 3D, edge to edge, curved tempered glass, covers fully until the metal sides
it even works perfectly with a case, full protection till the edge of the case
not sure if it can be found outside my country though, since its a no brand thing
can post a pic if you guys want to see
Click to expand...
Click to collapse
link ?

idan357 said:
link ?
Click to expand...
Click to collapse
here you go
ZackoFF96 said:
here you go, sorry for late reply, your post didn't appear in my notifications
the case is by cafele, the skin protector is from here
https://www.tokopedia.com/bbgadget/xiaomi-mi6-tempered-glass-3d-full-cover-curved-cnc-cold-carving
https://www.tokopedia.com/bbgadget/cafele-xiaomi-mi6-mi-6-ultra-thin-case-tpu-matte
Click to expand...
Click to collapse

Greetings.
I have a Kapaver solid case, specifically this ...
https://www.amazon.com/gp/aw/d/B071...s=Case+mi6&dpPl=1&dpID=51MwFWjHV3L&ref=plSrch
The case alone I recommend, the touch of the case and the design seems excellent, and gives a very good feeling of protection of the casing, the problem arises when I supplement it with a tempered glass screen protector brand SMTR that I purchased, in particular this ...
https://www.amazon.es/Protector-Pant...X76P4DZ0K67DWZ
The tempered glass soon after putting the case up, I tried with the 2 crystals that are included, and both are detached. They do not seem to detach on their own, but when they put the case on, they leverage and raise them.
My question is:
With a protector that protects curved edges may not happen to me?
What protector do you recommend me with a rigid case like the one I have?
Thanks in advance.
Enviado desde mi MI 6 mediante Tapatalk

canariohippie said:
Greetings.
I have a Kapaver solid case, specifically this ...
https://www.amazon.com/gp/aw/d/B071...s=Case+mi6&dpPl=1&dpID=51MwFWjHV3L&ref=plSrch
The case alone I recommend, the touch of the case and the design seems excellent, and gives a very good feeling of protection of the casing, the problem arises when I supplement it with a tempered glass screen protector brand SMTR that I purchased, in particular this ...
https://www.amazon.es/Protector-Pant...X76P4DZ0K67DWZ
The tempered glass soon after putting the case up, I tried with the 2 crystals that are included, and both are detached. They do not seem to detach on their own, but when they put the case on, they leverage and raise them.
My question is:
With a protector that protects curved edges may not happen to me?
What protector do you recommend me with a rigid case like the one I have?
Thanks in advance.
Enviado desde mi MI 6 mediante Tapatalk
Click to expand...
Click to collapse
I think my screen protector wouldn't fit with your case, since the lips of your case is far more towards the screen, my case's lips is shorter, just barely towards the screen

Hi, I have same screen protector as ZackFF96.
It can be bought from AliExpress, this is the exact one I purchased:
https://www.aliexpress.com/item/3D-...rved-Edge-Frosted-Protective/32828496451.html
You can find more listings if you search "mi 6 4d glass".
Just make sure it has a similar style plastic backing on the screen protector. This is the only type of glass screen protector I have found to be full cover and full glue on back of glass.
This type of glass screen protector goes almost to the edge of screen, it leaves about 0.25mm of glass around the edge. It also covers about 0.25mm of the sides of the screen, only noticeable in apps which have lines going down the very side of the screen.
I use this case and it fits perfectly with the glass screen protector.
https://www.aliexpress.com/item/For...-and-Silicone-Back-Cover-for/32688209331.html
Compatible with pretty much all cases, I think only the very bulky cases like wooden or big armour cases will not fit. You will need to have the screen protector applied almost perfect though, if too much to one side or corner the case will foul on the glass.

HELP
Hello , i buyed xiaomi MI6 and screenprotector nillkin H+PRO 9H can someone please can suggsest me the phone cover now witch fits perfectly. I really dont want that between the phone case and screenprotector that there will be ugly line between them (not covered area ) hope you guys understand my bad english . I would love to buy that one if you to alieexpress and search "xiaomi mi 6 black gold cover" and there the first one ( i cant post links because i am new user. is this cover and the class fits perfectly . ty for your help

I use a film of hydrogel ...
https://goo.gl/rCpDpZ

jurarj said:
I use a film of hydrogel ...
https://goo.gl/rCpDpZ
Click to expand...
Click to collapse
Mate could you post some pic? i would like to see the final result , i ordered as well.
thanks