Database Develop

Case with built in Screen Protector?

Just received my S7 Edge today, I've actually bought the Tech21 case for it.
However with the lack of decent screen protectors at the minute is there not a case which takes care of this for you?
I've had a look around and found an X-Doria Defense 360 Samsung Galaxy S7 Edge Case – Clear , anybody managed to get one or something similar which isn't too bulky?
Thanks

As i thought the Tech21 Evo Frame case edges must be fairly sharp and I can't get the screen protector to stay down especially up near the top. I've tried both the InvisibleShield Original and the Ultimate Shield one (I am in the UK). Has anybody got one to work with this case?
If not has any got any recommendations for cases with a built in screen protector as mentioned above?
Thanks

1rtomlinson said:
As i thought the Tech21 Evo Frame case edges must be fairly sharp and I can't get the screen protector to stay down especially up near the top. I've tried both the InvisibleShield Original and the Ultimate Shield one (I am in the UK). Has anybody got one to work with this case?
If not has any got any recommendations for cases with a built in screen protector as mentioned above?
Thanks
Click to expand...
Click to collapse
IQ Shield makes a case-friendly screen protectors for the phone. I am currently using it with my Tech21 Frame and have zero issues.
http://www.iqshield.com/iq24696-1-pack-samsung-galaxy-s7-edge-phone-screen-protector.html

Thanks that looks like it might do the trick. Not sure you can get them in the UK, does anyone know something similar or where I could buy one?

1rtomlinson said:
Thanks that looks like it might do the trick. Not sure you can get them in the UK, does anyone know something similar or where I could buy one?
Click to expand...
Click to collapse
Right now they are one of the few that actually makes case-friendly screen protectors. They do ship internationally though.

What is the difference between the case friendly and a regular screen protector? They have a few different option on amazon, but don't explain the difference.

By the looks of the post above compared to what I have got it seems to be cut out more at the top and the bottom corners compared to trying to cover the whole screen. The weakest places with my cover on are up near the very top and bottom so this should help it from not lifting when you put the case on but still cover most of the screen.

Both Skinomi and ArmorSuit make "case-friendly" screen protectors for the GS7E.

I've found one...
https://youtu.be/LVC7dimio7A

Got the same case
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

How do you guys like it?
VZ S7 EDGE ONYX

Simply Amazing
https://www.amazon.com/Protector-Coverage-Armorsuit-MilitaryShield-Replacements/dp/B01ACXSAKG
A little bit hard to install but the result is great

warfab said:
Got the same case
View attachment 3806942
Click to expand...
Click to collapse
Just picked one up from Best Buy, case is fine but built-in screen protector is making it difficult for the phone to register touches, I might have to switch it to glove mode or something I might just have to pull the screen protector off
Sent from my SM-G935T using Tapatalk

What do you guys think?
Look at this on eBay http://www.ebay.com/itm/262451629905
VZ S7 EDGE ONYX

Here is a "waterproof" full case with built in screen protector I stumbled upon while searching. It's pre-order. I went ahead and got one to test, will let you know how I like it, but I like the way it looks in the pictures.
http://tinyurl.com/z9q5y6z
Also found this one on the Bay...
http://tinyurl.com/gkqlckx

warfab said:
Got the same case
View attachment 3806942
Click to expand...
Click to collapse
Tried it at best buy. I have a film on so it had that slick oil thing going. But protects well. So not sure if the screen protector hindered full screen functionality.
VZ S7 EDGE ONYX

dlancep said:
Here is a "waterproof" full case with built in screen protector I stumbled upon while searching. It's pre-order. I went ahead and got one to test, will let you know how I like it, but I like the way it looks in the pictures.
http://tinyurl.com/z9q5y6z
Also found this one on the Bay...
http://tinyurl.com/gkqlckx
Click to expand...
Click to collapse
The Ghostek one looks cool. Has anyone tried it?

NoelBonel said:
The Ghostek one looks cool. Has anyone tried it?
Click to expand...
Click to collapse
it does look cool but its pre order so it not even available
i just bought this one http://tinyurl.com/gkqlckx hope its good as most s7 edge glass protectors are bad even the name brand ones ...

Just received the Ghostek Atomic 2.0 Case. Even though Screen is not glass does not feel that back. No stickiness like plastic films. But for now just had it on for some hours so can't really say for long run yet.
It is a bit wider like a little over 1/4" more than the UAG case. Which adds to black borders on the front as seen on the pictures. So if you already had trouble using it with one hand, this would cause a bit more trouble.
The thickness is about the same as the UAG case when both are facing screen down.
This case advertises Waterproof but has 2 openings for the speaker grill on top and the home button on bottom. I would expect water could get in through those openings. Screen is dot matrix.
The look of the case for me is nice and does not make it look ugly in my perspective. As because the screen guard as they call it make it look like the screen is showing more than some cases that adds front black plastic borders on top and bottom.
The one thing is you might want to use wireless charging more due to having to open up ports more often if using a usb charger.
Here are some pictures I took. Sorry about quality. The best Camera I have is the GS7 edge. lol.
http://imgur.com/a/osNxm
Right now I'm using it with the TANAAB Screen protector.
I'll post more about it. But first reactions seems to be a good case but would depend on how you would see it and if the 1/4" width bigger than a UAG case would be a drawback or not.
It Seems that Ghostek send several out to Mobilefun or Uviyo in batches but haven't shipped through their main site.
Update:
Update about the openings mentioned above. The waterproof works and does not get inside case if there's nothing that raises the area where the openings are. I had the TANAAB TGSP that doesn't go full length of the phone let water in but when removed and tested no water went in. So waiting to test it with a similar TGSP like GPEL2 that fully extends the the phone and see how that works.
When With TANAAB. Sensitivity didn't change and could provide good protection if needed as the outside screen is just a thin plastic film.
Just wanted to point this out.

shook187 said:
Just picked one up from Best Buy, case is fine but built-in screen protector is making it difficult for the phone to register touches, I might have to switch it to glove mode or something I might just have to pull the screen protector off
Sent from my SM-G935T using Tapatalk
Click to expand...
Click to collapse
I just swapped out my Note 7 for the s7 edge and purchased the Defender and has crazy problems with the screen registering the touches. I then removed the screen protector now the phone is loose in the case and the bottoms don't align anymore. So I did the OtterBox warranty and when that case comes in I'll get a refund from Sprint for the Defender and go with a different case. Did you remove the screen protector and have the same button issues? Also like the screen was pushing the phone down in the case which aligned the buttons. Really sucks it just doesn't work without the thick crappy built in screen protector.
Sent from my SM-G935P using XDA-Developers mobile app

OnePlus 3 Tempered Glass suggestion

I live in desert area and there literally unlimited amount of sand everywhere!
can anyone suggest me a good tempered glass? I have checked some on amazon but reviews says they suck!

I have had two different TGSP now and they both End up the same. Does not stick to the edges due to the curved screen. But mine does not Collect lint at all even though it does not adhere to the screen.
I have not tested orzly or similar but they seem to work bad with cases so.. heard though that orzly were coming with a new model soon that is slimmer.

Tried a few, all junk.. Until i bought the orzly brand. The one with the black tinted frame.
I could be lucky but It fits perfectly, stick securely to the screen and is now holding for 10days of very heavy use without a scratch or bubble or anything.! Can be used with the original sandstone cover and does cover the whole screen!

w3bureau said:
Tried a few, all junk.. Until i bought the orzly brand. The one with the black tinted frame.
I could be lucky but It fits perfectly, stick securely to the screen and is now holding for 10days of very heavy use without a scratch or bubble or anything.! Can be used with the original sandstone cover and does cover the whole screen!
Click to expand...
Click to collapse
Pictures and link to the specific protector you use? Would it work with cases with a lip around the front screen?

I ordered one similar. Is it easy to apply? your general thoughts on clarity, touch, etc?

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Avoid at any cost!!!
This is why...
Regards
Goran
Sent from my ONEPLUS A3003 using XDA-Developers mobile app

I'm using Nillking 9H+Pro TGSP and I find it really REALLY nice. Little halo effect on both sides but is Silky smooth and covers a great part of the screen

lparcshinoda said:
I'm using Nillking 9H+Pro TGSP and I find it really REALLY nice. Little halo effect on both sides but is Silky smooth and covers a great part of the screen
Click to expand...
Click to collapse
Can you post pictures of it. How bad is the halo?

lparcshinoda said:
I'm using Nillking 9H+Pro TGSP and I find it really REALLY nice. Little halo effect on both sides but is Silky smooth and covers a great part of the screen
Click to expand...
Click to collapse
I think it is the best for phones with cases even though there are issues with the "Halo" and it doesn't go edge to edge. The edge to edge or full coverage tgsp pull up with cases.
Sent from my ONEPLUS A3000 using Tapatalk

Hopefully this helps for Orzly Case Compatibility:
https://youtu.be/8Je-Ug0hM3E

Clarkkent434 said:
Can you post pictures of it. How bad is the halo?
Click to expand...
Click to collapse
It depends on how you are aligning the TGSP. For my personal preference I've installed it a little more towards the left side to maintain perfect readability and on the left I can see 1.5 mm halo effect that is like some 2.D visual bending effect. With the screen on you notice a some small rainbow effect but that is the only noticeable distortion. I will send some picture later

Has anyone tried the TGSP from OnePlus? Does seem to be on the pricier side, but since it's from OP, it shouldn't have any problems with fitting at least

lparcshinoda said:
I'm using Nillking 9H+Pro TGSP and I find it really REALLY nice. Little halo effect on both sides but is Silky smooth and covers a great part of the screen
Click to expand...
Click to collapse
This is like the only quality tgsp available in my area, so can you tell me, does it fit with casings like the tudia merge? Cause I'm thinking of buying/

Using Nilkin Amazing H+ PRO. It doesn't stick all the way because of the curved screen but it doesn't colect dust in those gaps. Actually no glass for OP3 sticks to the very end. It's all transparent (no black areas), and covers the front camera.
I saw this review and went for it. Can confirm that everything in the video is true.
EDIT: Can't confirm any compatibility with cases since I don't have and don't use any.

EDIT: Got a refund, the glass started to completely come off the top of the phone, and what with covering the notification light and a bit of the front-facing camera, that was the end of it.
I put the Pleison tempered glass protector on my OP3 yesterday; it's the 'new version' screen protector found on Amazon. It's OK, it covers the screen (I've also got it in a Spigen Neo Hybrid case), but the cutout for the front-facing cam isn't exact, there's a bit of 'shadow' on the right-side of the cam when you go to take a picture/video chat/etc. It also completely blocks the notification light, which is a PITA.
The top of the protector isn't 100% adherent to the screen, there's just a tiny bit of gappage that you can feel. Also, it makes it a little less than responsive when swiping down to open up the status bar/Notification Bar, you have to make sure to press a little harder than you normally would.
There was a little 'rainbow' effect going on when I first installed it, but that went away by the end of the day. All in all it seems like one of the better protectors out there, given Amazon reviews, but I don't think any company's got it down 100% yet. I have no idea why......
---------- Post added at 09:23 AM ---------- Previous post was at 09:20 AM ----------
Tidybeer said:
i hadn't found the tempered glass could cover all the screen, so just bought this full screen protector: http://vifocal.com/tempered-glass-f...e-for-oneplus-3-oneplus-three-smartphone.html
Click to expand...
Click to collapse
Have you received it/put it on yet? If so, how do you like it?

chops650 said:
Has anyone tried the TGSP from OnePlus? Does seem to be on the pricier side, but since it's from OP, it shouldn't have any problems with fitting at least
Click to expand...
Click to collapse
Brought the OnePlus TGSP with the phone a few months ago. The glass is the same size as the film that came with the phone, so it doesn't cover edge to edge. Pretty annoying because there's about 1 mm gap on each side between the edge of the screen and the TGSP. I haven't put it on yet.
It seems like all of the TGSP leave a halo effect based on the reviews.

I am using the Orzly glass and I am not fascinated about it.
Yes it covers the whole screen, yes it is compatible with the original OnePlus Snadstone hard case.
What i don't like is that it collects a lot of fingerprints thus making the screen hellish in direct sunlight. Add this to the clearly visible dots and one of the advantages of OP3 is gone.
I am still researching for a good TGSP and might try the new one from OP.

Tidybeer said:
Has a rainbow effect after full screen cover ... but decent product installation .. .. .. fingerprint magnet.
Click to expand...
Click to collapse
Yeah, I edited my original post; in addition to the blocked notification light and partially-covered front-facing camera, it started coming off the top of the screen even more. Got a refund from Pleson.

Tempered Glass For Oneplus 3/Oneplus Three/A3000 Phone 5.5 Inch High Quality Safety Full Cover Screen Protector Full Screen
http://s.aliexpress.com/MZJZNfmU
oneplus 3 glass tempered one plus 3 full cover mofi original protective glass one plus 3 screen protector ultra thin clear film
http://s.aliexpress.com/maEbyiqe
Is everyone buyed one of this? Feedbacks seems good but someone says there is same problem.

Djalaal said:
This is like the only quality tgsp available in my area, so can you tell me, does it fit with casings like the tudia merge? Cause I'm thinking of buying/
Click to expand...
Click to collapse
it does fit with orzly tpu case and the official karbon case, so it should fit with every other case

Case just arrived today (seems tough)

I just received the case pictured below. Seems like a pretty solid case. The usb slot has a flap over it. The speakers are covered but ported out the front of the case. The same with the microphone. Seems to pick up audio fine. Case looks like it's uniform for both the 4/4x (I have the 4x snapdragon and ordered as such but it also has a hole in the middle of the top that would work for the 4). All ports are available on the top of the phone. 2 pieces one rubber inner and one plastic outer. I like it. The standard full screen tempered glass fits the window perfectly. I would recommend putting the case on first then the tempered glass to get a perfect fit.
There are many dealers on Aliexpress with this case. Several colors. I got the red one and another black one.
The only thing I don't like is because of the way the buttons are you lose the tactile click when you press them. It's just the rubber is thick enough that you can't feel it. The buttons are responsive, they just don't have that clicky feel.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

I have the screen protector that has the flexible edges on my phone right now. So the main viewing area is tempered glass and the edges are a soft plastic material. The backside of the glass is completely covered with adhesive so it's good in that aspect. However the case as it comes seems to cause the edges to lift up. I used my Dremel Rotary tool to trim the inside rim of the case and now it looks perfect. I'd say doing that now I'm 90 percent happy with the case and screen protector combination.

Thanks @prisoner1969 for the post.
I had ordered this case from eBay just before your review was posted - still waiting for it to arrive, but hopefully it will be good for me too.
Which screen protector are you referring to - is there a link you are able to post or search term that I could use please? I have a tempered glass protector intended for the Note 4X, but it does not go to the edges of the screen.

Christos said:
Thanks @prisoner1969 for the post.
I had ordered this case from eBay just before your review was posted - still waiting for it to arrive, but hopefully it will be good for me too.
Which screen protector are you referring to - is there a link you are able to post or search term that I could use please? I have a tempered glass protector intended for the Note 4X, but it does not go to the edges of the screen.
Click to expand...
Click to collapse
I have it reviewed in the "tempered glass" thread. Again without modifying the case the edge of the protector might lift up. So far it's the best tempered glass solution I've found. I have about 10 pieces of glass total from different vendors and this style is great. The only problem is you can't see the buttons on the bottom if you use this one. However I don't find that a big deal since we all know where our buttons are
https://www.aliexpress.com/item/Red...2776331144.html?spm=2114.01010208.8.55.DLhuOj

And what's the link to this tough case here?

Case
This case is really good.
Its have a metal frame and protect the phone.
Really good looking.
But i need one like you.
Its a metal but make the phone little heavy.
One like you must i have.
But black

Sectorian said:
This case is really good.
Its have a metal frame and protect the phone.
Really good looking.
But i need one like you.
Its a metal but make the phone little heavy.
One like you must i have.
But black
Click to expand...
Click to collapse
I liked the look of the case you posted. So I bought one today. I ordered the black one with the red trim. I don't mind if it's a little heavy. I'm just looking for a good case that works well with the screen protector that I have.

pls giv link

prisoner1969 said:
I liked the look of the case you posted. So I bought one today. I ordered the black one with the red trim. I don't mind if it's a little heavy. I'm just looking for a good case that works well with the screen protector that I have.
Click to expand...
Click to collapse
Okay this case works perfectly with the hybrid tempered glass with the soft edges that claim to be carbon fiber. So far the best combo for glass and case that I've found

prisoner1969 said:
Okay this case works perfectly with the hybrid tempered glass with the soft edges that claim to be carbon fiber. So far the best combo for glass and case that I've found
Click to expand...
Click to collapse
Then post real images of how it looks? Im curious

PriPhaze said:
Then post real images of how it looks? Im curious
Click to expand...
Click to collapse
Kind of hard when my only camera is my phone

prisoner1969 said:
Kind of hard when my only camera is my phone
Click to expand...
Click to collapse
Use mirror brooooo. We want to see

prisoner1969 said:
I just received the case pictured below. Seems like a pretty solid case. The usb slot has a flap over it. The speakers are covered but ported out the front of the case. The same with the microphone. Seems to pick up audio fine. Case looks like it's uniform for both the 4/4x (I have the 4x snapdragon and ordered as such but it also has a hole in the middle of the top that would work for the 4). All ports are available on the top of the phone. 2 pieces one rubber inner and one plastic outer. I like it. The standard full screen tempered glass fits the window perfectly. I would recommend putting the case on first then the tempered glass to get a perfect fit.
There are many dealers on Aliexpress with this case. Several colors. I got the red one and another black one.
The only thing I don't like is because of the way the buttons are you lose the tactile click when you press them. It's just the rubber is thick enough that you can't feel it. The buttons are responsive, they just don't have that clicky feel.
Click to expand...
Click to collapse
Link please

I'm waiting for the same case to arrive for my phone! Is the case hard to put on and take off?

anyone know of a case with a cover for cards and such?

calm_depression said:
anyone know of a case with a cover for cards and such?
Click to expand...
Click to collapse
gearbest(DOT)com/cases-leather/pp_621834.html
:good:

Do you have experience with that one? Have any reviews? It looks like it has poor quality

Ringke Invisible Defender (tempered glass) + Ringke Fusion-X (casing)

I initially planned to only buy the casing from Ringke since I prefer how it looks compared to Spigen's. However, I then noticed that Ringke also produced tempred glass for Poco F1, so I ordered them both and have been using them for several days now.
Ringke Invisible Defender - tempered glass
This one came a couple days earlier than the case, so I have it on first while using the default casing.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here are some of my thoughts:
There's not much of a problem precision-wise, the top and bottom part are well covered, the glass went way over the screen and into the bezel (Image A)
The side part is covered very precisely and didn't go over to the bezel part, too tight that for me it led to the issue below (Image B)
When in the dark, tilting the phone to the side reveal this rainbowish lines (Image C)
Using only the default slim casing, you can feel the edges of the glass are somewhat rough. The Ringke case below fixes this issue for me though, as the case cuts higher than the glass so it covers the rough gap. Ringke did explained on the product's page about having inevitable lifted sides due to the curved nature of the phone screen, so this might be the reason of that rough edge.
Ringke Fusion-X Casing
I've never use Ringke products prior to this phone, the packaging of the casing is somewhat minimalist. When applied to the phone, however, it feels satisfyingly fit to the phone. I have no complaint with the precision so far.

One more thing on the tempered glass: No oleophobic coating, it's a fingerprint magnet

Im fine with ringke fusion X case and Nillkin tempered glass.eeheheh. paired with a ringke strap

philsuf said:
One more thing on the tempered glass: No oleophobic coating, it's a fingerprint magnet
Click to expand...
Click to collapse
Thank you for this wonderful post I am planning to buy ringke case....I am using poco since past 5 months with default tpu case, now it is turning yellowish brown like tpu cases do after a while.... Can you tell me what is the material on the transparent back of rinkey case ? And please tell if it gets scratches after usage of few months.....
Also did you find a tempered glass with decent olephobic coating and also which is not a rip off. I'm happy with my current one, only one issue that it is a finger print magnet too.....The screen looks dirty when phone is locked and I have to constantly wipe it to keep it clean

Kobra.shady said:
Thank you for this wonderful post I am planning to buy ringke case....I am using poco since past 5 months with default tpu case, now it is turning yellowish brown like tpu cases do after a while.... Can you tell me what is the material on the transparent back of rinkey case ? And please tell if it gets scratches after usage of few months.....
Also did you find a tempered glass with decent olephobic coating and also which is not a rip off. I'm happy with my current one, only one issue that it is a finger print magnet too.....The screen looks dirty when phone is locked and I have to constantly wipe it to keep it clean
Click to expand...
Click to collapse
After 2 months of usage, no scratches yet. But I can't confirm on the back side material, my guess would be that it is plastic. So far I am really happy with the case, but not so much with the glass.
I still stick with the Ringke glass. My workaround is to coat it again with a liquid glass protection, just the cheap one. It isn't exactly fingerprint proof, but much better than using just the tempered glass.
Sent from my [device_name] using XDA-Developers Legacy app

philsuf said:
After 2 months of usage, no scratches yet. But I can't confirm on the back side material, my guess would be that it is plastic. So far I am really happy with the case, but not so much with the glass.
I still stick with the Ringke glass. My workaround is to coat it again with a liquid glass protection, just the cheap one. It isn't exactly fingerprint proof, but much better than using just the tempered glass.
Click to expand...
Click to collapse
Cool n thanks for quick reply...if you bought that liq glass protection online...can u please send me the link, I'll really appreciate it ?
And I was just worried about scratches on the back panel, since yours is okay so now I will happily buy Ringke case ?
And for the tempered glass I need to find something.... Hopefully that solution you are using will help.. because online if you buy tempered glass they say it has olephobic coating and anti finger print in product description but mostly it's just gimmick ??
C this is how smugged my phone gets....And it may look that I have touched it with oily figures, but trust me that ain't the case

Kobra.shady said:
Cool n thanks for quick reply...if you bought that liq glass protection online...can u please send me the link, I'll really appreciate it
And I was just worried about scratches on the back panel, since yours is okay so now I will happily buy Ringke case
And for the tempered glass I need to find something.... Hopefully that solution you are using will help.. because online if you buy tempered glass they say it has olephobic coating and anti finger print in product description but mostly it's just gimmick
C this is how smugged my phone gets....And it may look that I have touched it with oily figures, but trust me that ain't the case
Click to expand...
Click to collapse
It looks not good but the glass seems very protective!!
It covers very well!! :good:

Kobra.shady said:
Cool n thanks for quick reply...if you bought that liq glass protection online...can u please send me the link, I'll really appreciate it [emoji4]
And I was just worried about scratches on the back panel, since yours is okay so now I will happily buy Ringke case [emoji3]
And for the tempered glass I need to find something.... Hopefully that solution you are using will help.. because online if you buy tempered glass they say it has olephobic coating and anti finger print in product description but mostly it's just gimmick [emoji51][emoji14]
C this is how smugged my phone gets....And it may look that I have touched it with oily figures, but trust me that ain't the case
Click to expand...
Click to collapse
No problem, happy to help. However, I can't help you with the link, as I don't think any store here (Indonesia) will ship overseas.
Whoa, that is a really bad case of prints you got there. When I said my glass is fingerprint magnet (before I put liquid coating), it actually wasn't even half as bad as yours!
Anyway, I am using this liquid to make up for that problem:
https://shopee.co.id/novanrara22/1435201737?version=d8a482c89f545d4b74c105cce349c2ba
Cost me less than a couple of dollars
Sent from my [device_name] using XDA-Developers Legacy app

penna_85 said:
It looks not good but the glass seems very protective!!
It covers very well!! :good:
Click to expand...
Click to collapse
Yup it's very protective, doesn't block any part of screen or notch display, but yes only issue is finger print marks...rest I am happy with it..
---------- Post added at 12:28 PM ---------- Previous post was at 12:25 PM ----------
philsuf said:
No problem, happy to help. However, I can't help you with the link, as I don't think any store here (Indonesia) will ship overseas.
Whoa, that is a really bad case of prints you got there. When I said my glass is fingerprint magnet (before I put liquid coating), it actually wasn't even half as bad as yours!
Anyway, I am using this liquid to make up for that problem:
https://shopee.co.id/novanrara22/1435201737?version=d8a482c89f545d4b74c105cce349c2ba
Cost me less than a couple of dollars
Click to expand...
Click to collapse
?? Told you it's really annoying, I have to keep wiping my screen after few hours or it looks quite dirty...I will try to find similar kind of solution here, or get tempered glass from local market instead of online, because online u can not be sure ? even this tempered said "anti figure print" ????

[Review] Nillkin Frosted Case & XD CP+ MAX screen protector

So I got the Nillkin Frosted case and XD CP+ Max screen protector, here is the review.
The case color is nice, similar to the blue that is on the phone, so it fits well. Case is thin, textured on the back and side which makes it very comfortable on the hand, it's lightweight as well which is good. As with you expect from a thin lightweight case like this, protection won't be much, it'll save you from a short fall but nothing Mil grade protection here, no complaints.
The camera protection clearance is actually quite good, considerably more than the plastic one that comes with the phone, very happy with this.
The only Con is that when used with the same brand tempered glass, the lip sits lower than the screen protector which means don't lay the phone face down on scratching surfaces.
Now on to the screen protector. Very nicely made, heavy, good touch experience, no problem with fingerprints(you will have to re-enroll prints for best exp).
The application is a breeze, just lay it down, don't even have to apply any pressure and the adhesive will stick, removing bubbles is easy too. I left 1 small dust particle somehow and now it's visible on the screen, don't know if that will annoy me or not, might have to reapply it or use the 2nd one that I bought. This is totally my fault though. The edges of the screen will be covered just a little bit, but I don't see any problems with that, everything displays fine in full, the tiny edges covered don't make any difference once you got used to it.
So to sum up. Happy with the case. Very happy with the protector.
I'll probably wait for a nice sturdy case from some US brand to replace this one though, lip protection isn't enough.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Great review, one thing I was wondering, any chance of weighing the case? I was considering the official oneplus Karbon case, that weighs only 13 grams, but costs a lot more, I know that Niikin cases are good quality at the right price...
Do you know how much the case weighs?

justwondering said:
Great review, one thing I was wondering, any chance of weighing the case? I was considering the official oneplus Karbon case, that weighs only 13 grams, but costs a lot more, I know that Niikin cases are good quality at the right price...
Do you know how much the case weighs?
Click to expand...
Click to collapse
no. I don't have that kind of scale to weight it properly. It's real light, it's equal to the clear case that comes with the phone at best, if not lighter.
And seeing pictures on the Karbon case I don't think they differ much in terms of protection, this one got more grip for sure. Also in the blue color very closely matched with the phone color if you have the glacier blue

aleck0112 said:
no. I don't have that kind of scale to weight it properly. It's real light, it's equal to the clear case that comes with the phone at best, if not lighter.
And seeing pictures on the Karbon case I don't think they differ much in terms of protection, this one got more grip for sure. Also in the blue color very closely matched with the phone color if you have the glacier blue
Click to expand...
Click to collapse
I have the same colour of 7t , I must admit I tend to like black cases, they Karbon case is only 13grams, which is very light, I did ask on Amazon with regards to the case the weight of the Nillkin frosted case and the seller said it weighed 21gram....still nice and light, but I find the 7t a tad heavy with my current case on which is nice and protective, but weighs 32grams, I like my case etc, but the weight is kinda heavy in the hand.
I have ordered the Nillkin case from eBay from a Chinese supplier, so bit of a waiting time, but great value at only £5.40 delivered.
I am a bit unsure about spending £27.95 on the official Karbon case for the 7t, but I do know they are quiality feel in the hand.
I have had Nillkin cases in the past and I have always found them to be good quality, I shall confirm the cases weight once it arrives.

I just got this case from AliExpress for 3.5$, it's a beautiful case. Fits the 7T perfectly and cutouts are perfect too.

Does the tempered glass border cover portion of the screen?

veeholics said:
Does the tempered glass border cover portion of the screen?
Click to expand...
Click to collapse
yes it does. And more than the official glass. If you can get it and can afford it I'd still recommend official. But this one does a fine job

This is the case that was super, super slippery when I tried it. Damn near dropped my phone because of it. Sent it back.

roaduardo said:
This is the case that was super, super slippery when I tried it. Damn near dropped my phone because of it. Sent it back.
Click to expand...
Click to collapse
really? Defo not to me, it has textured surface on the whole back and also on the sides, no way it's slippery. Maybe you got a different version, check my pictures

Can you add a picture of the camera bump with the case on? I use it on my Pocophone and love it, but I already ordered the 7T and want to see If i order one for it.

aleck0112 said:
yes it does. And more than the official glass. If you can get it and can afford it I'd still recommend official. But this one does a fine job
Click to expand...
Click to collapse
Why can't they make a completely transparent one without black borders? All screen guards these days come with those ugly borders.

Mr. Kaz said:
Why can't they make a completely transparent one without black borders? All screen guards these days come with those ugly borders.
Click to expand...
Click to collapse
Because they actually don't stick to the edges. The shape of the screen makes it impossible for the protector to stick correctly and it makes appear some areas which are not in contact to the screen. The black parts are actually not sticking.

What I am waiting for from Nillkin is the Nature case. Because of the Gray variant. I have the Frosted Silver variant. Even though I liked the free case inside the box... it makes the phone a lot more frosted white. Especially on the sides. If only OnePlus provided the smoke gray color just like on OnePlus 6T, It would've been perfect.