Database Develop

stuck on bootscreen (Serial v2. 08/USB v2. 08)

Hi to all,
My device is stuck on bootscreen:
- Serial v2. 08 (outside of cradle)
- USB v2. 08 (inside cradle)
I' ve tried the solution:
-use Mitty, when stuck on bootscreen
(http://forum.xda-developers.com/showpost.php?p=934239&postcount=12)
but without success.
I See again:
- Serial v2. 08 (outside of cradle)
- USB v2. 08 (inside cradle)
Before of this I've used:
-xdadev_all_unlock-v1.5 (with success);
-after I've copied EnterBL.exe to my device and execute it for stupid purpose only
and now my device stuck as mentioned before.
I cannot connect it through ActiveSync 4.2 and simply stuck
I've read a lot of thing and suggestion on this forum and I've tried various solution but the device stuck and I'm too.
I'm a newbie and really I don't know if this is a bl mode or something else.
Someone can help me Please?
Thanks
My device:
Vodafone VPX v1620
Model PH2OB2
Language:UK

Have you tried a soft reset?

you just need to find a different ROM and flash it using the file i attached. you are also going to have the change the htcruu files to ruu files. all u have to do is a simple renaming. try that and ur phone should be back to normal again soon.

Take care to mtty version 1.16 rather than 1.42
Hi and thanks to all,
the problem was the version of mtty.
the version 1.16 works fine
the 1,42 doesent
so now I've done the step
please look the attached image
and now my device work again
but without radio
on the screen on boot I read:
NO GSM
D 1.40 ETC ETC

mtty 1.16 link for download
I don't know if I can however I post the link for all that need the newer version of mtty
http://buzzdev.net/index.php?option=com_phorum&Itemid=125&phorum_query=file,40,file=186
HAVE A LOT OF FUN!

Stuck on bootscreen (Serial v2.06/USB v2.06)
Hi All,
thanks a lot for the great help,
I Have I-mate PDA2k with WM2003SE
I have ROM ver. 1.40.00
I tried to reflash my PDA2k as I found that the sound is no longer work as well as the SD card is no longer been recognized by the OS
Now I am stuck on bootloader (Serial v2.06/USB v2.06) screen after unsuccessful flashing my PDA due to power failure in my home electricity
I used MTTY V1.42, set 14 0, task 28 and task 0 commands and successfully the OS worked again, then I found new ROMs for WM2005, So I used XDAIII Ext. ROM unlock tool, after that the machine started to HANG so I made a Hard reset then it return to hang on BOOT splash screen again
so I used mtty again to reprepare the Disk On Chip to return to a clean OS
all above three commands executed successfully and after soft reset the PDA2k stuck in the boot screen, I tried hard reset as well but with no hope
I tried to use MaUpgradeUt_noID.exe to reflash the Rom nothing happen, I tried to use another official roms from I-mate but nothing happen I stuck in the bad bootloader screen, I tried to use d2s command to make a backup of my ROM but when the command is executed the USB v2.06 message disappers from screen
after all this, is there anyone can help me with a new idea on how to fix it.
Thanks alot on advance.

hi
I have the same problem, could you help me?
secur said:
Hi to all,
My device is stuck on bootscreen:
- Serial v2. 08 (outside of cradle)
- USB v2. 08 (inside cradle)
I' ve tried the solution:
-use Mitty, when stuck on bootscreen
(http://forum.xda-developers.com/showpost.php?p=934239&postcount=12)
but without success.
I See again:
- Serial v2. 08 (outside of cradle)
- USB v2. 08 (inside cradle)
Before of this I've used:
-xdadev_all_unlock-v1.5 (with success);
-after I've copied EnterBL.exe to my device and execute it for stupid purpose only
and now my device stuck as mentioned before.
I cannot connect it through ActiveSync 4.2 and simply stuck
I've read a lot of thing and suggestion on this forum and I've tried various solution but the device stuck and I'm too.
I'm a newbie and really I don't know if this is a bl mode or something else.
Someone can help me Please?
Thanks
My device:
Vodafone VPX v1620
Model PH2OB2
Language:UK
Click to expand...
Click to collapse

secur said:
I've read a lot of thing and suggestion on this forum and I've tried various solution but the device stuck and I'm too.
I'm a newbie and really I don't know if this is a bl mode or something else.
Someone can help me Please?
Thanks
My device:
Vodafone VPX v1620
Model PH2OB2
Language:UK
Click to expand...
Click to collapse
OK i know you are new.. and maybe, just maybe a bit nervous because you have a device you cant use..
READ THE DAMN WIKI ALREADY!
There are so many ways to upgrade a rom, or extract it,
Let me give you a little hint.. Use that really bright shiny search button up there.. (ok so its not bright and shiny, but it is there!)
Press the down arrow, choose advanced search,
then type in what you need help with,
then make sure that the forum is BlueAngel (on the right!)
then hit search...
That will bring all the posts with the words that you looked for in the BlueAngle section of the forum.
Multiple posting is stoopid.. This is the 6th post i have seen from you regarding your device that you could have solved using your own head, and searching for the answer istead of sitting on your backside waiting for someone to post the link to solve all your problems.
I know this sounds harsh, and scarcastic, and a tad evil... EVERYTHING I HAVE LEARNED ABOUT A HTC DEVICE, I HAVE LEARNED FROM THIS SITE,
and reading the wiki, and google, and all kinds of other services...
there is no shame in asking for help.. just exhaust all other options first!
@ jbodaa
please read above and take note as well!

1. Download Romupdate v1.11a
2. Stop ActiveSync, by Task Manager (press Ctrl + Alt + Delete) kill two processes rapimgr.exe and wcescomm.exe
3. put your device into Bootloader Mode by pressing Power + Record Button and Soft Reset.
4. Run Romupdate v1.11a (from downloaded)
5. from left top corner drop down menu Port: Choose WCEUSBSH001 (If you only see COM 1 and COM1 try unplugging the USB and replugging it)
6. press OK button
7. type "set 14 0" without the quotes in blank window that showed up to tell bootloader to boot the OS after reset.
8.press enter to execute
9. on next line you will see:
HTCST ÚÈÒHTCEUSB>
10.type "task 28" (no quotes) right after > sign to get your device formatted
11.press enter to execute, you gonna see:
DOC_format_HW+
DOCInfoTableinitHW+
Binary0:dwSize=80000
BINFS0:dwSize=0
FAT0:dwSize=1000000
FAT1:dwSize=2BA0000
All:dwSize=3C20000
USB>
12. type "task 0" (no quotes) right atfter > sign to ask your device reboot
13.press enter to execute the command
14. take the device out of the cradle, and manually reset it if it does not do that already.
good luck.

stuck on bootscreen USB v2. 07
hi 2 all.i i have i-mate_PDA2k ppc.
i downloaded i-mate_PDA2k_Arabic_13100_112_10600_SHIP to my pc and clicked on it and got stuck on boot screen USB v2. 07.i tried soft reset & hard reset i tried Romupdate v1.11a and mtty1.42 i tried every thing i would whan to bring it back to factory setting can some one help me.thanx a million thanx in advance
----------------------------------------------------------------------------
Learn 2 live & live 2 learn.learn 2 listen & listen 2 learn.Live 2 love & love 2 live.
We live 2 die & we die living.
life is what u make of it

[Q] [HELP] KFHD 7 stuck in a boot loop!!

Please help me with advice on the best solution solve this problem.
I mistakenly deleted Launcher in my daughter's KFHD 7 and now the system is in a loop unable to start. When i turn it on, it starts and then stop a "Kindle Is Upgrading... Please wait..." stage.
I am a noob at this, but can follow instructions on what to do the fix it. I have already bought a factory cable earlier. I received the 7.2.3 update yesterday which broke my root and since then, the system has become slow and the screen will get stuck and then go completely black without obvious reason.
Thank you for all for your inputs.

http://forum.xda-developers.com/showthread.php?t=1951254
Sent from my KFTT using xda premium

Thank you
longthinkzhang said:
http://forum.xda-developers.com/showthread.php?t=1951254
Sent from my KFTT using xda premium
Click to expand...
Click to collapse
Thanks for a speedy reply. I will look through the thread and read up.

Problem solved!
neoseekar said:
Please help me with advice on the best solution solve this problem.
I mistakenly deleted Launcher in my daughter's KFHD 7 and now the system is in a loop unable to start. When i turn it on, it starts and then stop a "Kindle Is Upgrading... Please wait..." stage.
I am a noob at this, but can follow instructions on what to do the fix it. I have already bought a factory cable earlier. I received the 7.2.3 update yesterday which broke my root and since then, the system has become slow and the screen will get stuck and then go completely black without obvious reason.
Thank you for all for your inputs.
Click to expand...
Click to collapse
Ok i have been able to fix this problem. The device is up and running. I read up on kinfauns' KFFB thread which is most helpful. Unfortunately, the factory cable i bought off of ebay UK seem not to work. After i connected the device to the pc using the cable and issued the "fastboot getvar product" to verify the Kindle Fire is in fastboot mode, I only got < waiting for device >and nothing else, just stuck there.
I then switched to the stock kindle cable. The kindle booted up like before. Ii issued the "fastboot -i 0x1949 flash boot boot.img", this got the device into Home area and I was able to side-load Launcher.apk backup file from dropbox into the /system/app folder and that fixed it.
Thanks to onemeila and kinfauns for putting up these helpful threads and to longthinkzhang for pointing me to the right thread.

Help save my phone! :(

Hi people
Yesteday i bough a LG 4X and i wanted to put CM 10 on it.
I followed the normal instructions, but something went terrible wrong.
My can't get passed the loading LG logo now, and when i try to go to recovery i tells me the following.
ELGE_SECURITY3 ERROR: boot image signature
Critical failure: Unable to start kernel.
Unrecoverable bootloader error (0x0000002).
I have tried this guide:
http://forum.xda-developers.com/showthread.php?t=1861854
and this:
http://forum.xda-developers.com/showpost.php?p=38838927&postcount=7&nocache=1&z=6539526249427472
I both cases i starts off well but then the USB suddenly wont reconize my phone and the screen turns gray.
Can anybody help !?!?!

install proper usb drivers , lg mobile support tool
try inserting the usb with pulled battery while holding vol down, after you accesd the download mode reinsert battery and follow one of the above guides. try it multiple times if you cant acces the download mode at the forst time
Sent from my LG-P880 using xda app-developers app

You didn't unlock a bootloader but you've installed custom recovery.
Use a KDZ to flash stock ROM.

kaad87 said:
Hi people
Yesteday i bough a LG 4X and i wanted to put CM 10 on it.
I followed the normal instructions, but something went terrible wrong.
My can't get passed the loading LG logo now, and when i try to go to recovery i tells me the following.
ELGE_SECURITY3 ERROR: boot image signature
Critical failure: Unable to start kernel.
Unrecoverable bootloader error (0x0000002).
I have tried this guide:
http://forum.xda-developers.com/showthread.php?t=1861854
and this:
http://forum.xda-developers.com/showpost.php?p=38838927&postcount=7&nocache=1&z=6539526249427472
I both cases i starts off well but then the USB suddenly wont reconize my phone and the screen turns gray.
Can anybody help !?!?!
Click to expand...
Click to collapse
thats the problem now. 3 months ago that i wanted to unlock the bootloader , i just typed : adb drivers and got them. now if u search for adb drivers u will find a million posts that say nothing, because no one searches. since 3 months ive seen at least more 20 posts about unlocking the bootloader......... anyway. go download android sdk , the 32 bit version even if u r on windows x64. install , run, update it. u will get the drivers right. after that u can easily unlock the bootloader and install team win recovery or cyanogen recovery. use the all in one toolkit of afro. thats all.

stuck to fastboot when try to flash recovery [Lenovo K3 Note]

Hello there, after an hour of search and no useful results, i've decided to ask my question (sorry, if it's already been answered, but i didn't find anything)
I used the following procedure to flash the CWM recovery, but something goes wrong:
( http://forum.xda-developers.com/android/development/ufficial-thread-lenovo-k3-note-t3102997 )
1. "adb devices" shows the phone correctly (At this state the phone is properly shown in my windows device manager)
2. "adb reboot bootloader" pushes the phone to boot in fastboot mode
... but ...
3 "fastboot devices" doesn't find it anymore. (At this state the phone is shown as an unknown device in my windows device manager)
4. after some attempts I tried "fastboot flash recovery recovery.img" anyway, but as I expected, i was unable to reach the device, the image should be written to.
5. every the phone stucks in fastboot mode, and the only way to restart it is by pulling out the battery.
So, what is the possible reason, to loosing connection to the device after the reboot in fastboot mode? (phone drivers already installed, pc rebooted, ADB SDK installed too)
Thanks in advance for any help!
Regards!

thudrumble said:
Hello there, after an hour of search and no useful results, i've decided to ask my question (sorry, if it's already been answered, but i didn't find anything)
I used the following procedure to flash the CWM recovery, but something goes wrong:
( http://forum.xda-developers.com/android/development/ufficial-thread-lenovo-k3-note-t3102997 )
1. "adb devices" shows the phone correctly (At this state the phone is properly shown in my windows device manager)
2. "adb reboot bootloader" pushes the phone to boot in fastboot mode
... but ...
3 "fastboot devices" doesn't find it anymore. (At this state the phone is shown as an unknown device in my windows device manager)
4. after some attempts I tried "fastboot flash recovery recovery.img" anyway, but as I expected, i was unable to reach the device, the image should be written to.
5. every the phone stucks in fastboot mode, and the only way to restart it is by pulling out the battery.
So, what is the possible reason, to loosing connection to the device after the reboot in fastboot mode? (phone drivers already installed, pc rebooted, ADB SDK installed too)
Thanks in advance for any help!
Regards!
Click to expand...
Click to collapse
Hi,
I have the same problem. Any solution exists for that?
Thanks.

Same here. Some one saying it's driver issue, but I didn't have any errors installing the drivers and I tried different PCs, all the same...
Another reason I said it might not be a driver issue was that I used that PC to root the device successfully a while ago. But after updating to the newly released stock ROM, now this rooting method stuck in the fastboot mode.

I've tried another PC too ... same situation. It should be a phone problem and not a PC, since I've never used the second PC for rooting or such things before. Did someone tried other ways to root the K3 Note (apps etc.)?
Regards!

marskingbeatgates said:
Same here. Some one saying it's driver issue, but I didn't have any errors installing the drivers and I tried different PCs, all the same...
Another reason I said it might not be a driver issue was that I used that PC to root the device successfully a while ago. But after updating to the newly released stock ROM, now this rooting method stuck in the fastboot mode.
Click to expand...
Click to collapse
I've tried another PC too ... same situation. It should be a phone problem and not a PC, since I've never used the second PC for rooting or such things before. Did you tried other ways to root the K3 Note (apps etc.)?
Regards!

thudrumble said:
I've tried another PC too ... same situation. It should be a phone problem and not a PC, since I've never used the second PC for rooting or such things before. Did you tried other ways to root the K3 Note (apps etc.)?
Regards!
Click to expand...
Click to collapse
Hi,
I tried this method.. I can not add link. Try to find "How to root and install Google Play Store on Lenovo K3 Note" in youtube . And it did work for me. Root checker showed that root access is not fully. But I manage to install another rom.

This might help:
Go to the main thread...and jump to page 73 and read post #722
http://forum.xda-developers.com/k3-...vo-k3-note-t3102997/post61860445#post61860445
For a change, you could use another method:
Lenovo K3 Note Manager by Pr1nc3V located here: http://forum.xda-developers.com/k3-note/general/tool-lenovo-k3-note-manager-t3261285

freelancer81 said:
This might help:
Go to the main thread...and jump to page 73 and read post #722
http://forum.xda-developers.com/k3-...vo-k3-note-t3102997/post61860445#post61860445
For a change, you could use another method:
Lenovo K3 Note Manager by Pr1nc3V located here: http://forum.xda-developers.com/k3-note/general/tool-lenovo-k3-note-manager-t3261285
Click to expand...
Click to collapse
Thanks dude! The first method is the one, that won't work with my K3Note, but I'll try your plan B later today. Fingers crossed

cloudinio said:
Hi,
I tried this method.. I can not add link. Try to find "How to root and install Google Play Store on Lenovo K3 Note" in youtube . And it did work for me. Root checker showed that root access is not fully. But I manage to install another rom.
Click to expand...
Click to collapse
Thanks! I found the video and try this one too, if the freelancer81's method fail.

Mission accomplished

Mission accomplished? Kindly share how you were able to resolve it as I am still faced with the problem. I have tried all the recommendations here

same issues..
ADB sees the phone. but fastboot doesnt seem to connect / see it..
And no thats not the issue of not booting into the recovery as suggested, its not even able to flash the recovery.

stinvilla said:
Mission accomplished? Kindly share how you were able to resolve it as I am still faced with the problem. I have tried all the recommendations here
Click to expand...
Click to collapse
Anyone?

No one?

Lenovo k3 note stuck on logo
I want volte support in k3 note so I know the cm14 is with volte support when I am trying flash cm14 with twrp the zip file successful install. But in log show "E: unknown commad[log] two rows
After that when I power on the phone its stuck on logo.
Sorry for grammar errors
Give me solution....

Softbricked my lg l90 d405n

Hey, i rooted LG D405n recently, had fun with it and decided to flash a new custom recovery... Something went wrong there... I had no sighns of life first 4h until i finaly got to fastboot.
I tried folowing http://forum.xda-developers.com/showthread.php?t=2797190, but i get this error
+ I cant see my phone in My computer, but is visible in device manager as "android device".
*update* Followed this guide: http://forum.xda-developers.com/showthread.php?t=1088046&highlight=fastboot. nothing happened yet, but i get a responce on my fastboot screen! Small success!
*update* Ok, big step here: i was able to launch team win recovery project using command "fastboot boot (image name)"
*update* Back to square one... ERROR:BOOT certification verify.
Any help is much appreciated!
Sorry for broken english and good luck!