Related
Hi, i had one phone i9000 that was not going into recovery or download mode. SO, i tried flashing Aries_P-SBL.tar.md5 as PDA to enable recovery mode. I then got failed message and now phone is stuck on "PC ! Phone" logo. It wont go into recovery or download mode. Help
Take the battery out, wait a little and see if it will boot up,if not, do the same again but try to turn it on while connected to pc....
lcgmadeira said:
Take the battery out, wait a little and see if it will boot up,if not, do the same again but try to turn it on while connected to pc....
Click to expand...
Click to collapse
I think i need jig cable. DO you know how to make it or where to buy it from online?
i dont know about the cable, sorry. but the same thing append to my first galaxy and it came back on doing what i said on previous post, i had about half hour trying and it worked...
lcgmadeira said:
i dont know about the cable, sorry. but the same thing append to my first galaxy and it came back on doing what i said on previous post, i had about half hour trying and it worked...
Click to expand...
Click to collapse
Ok, will try again thanks
Hi, im off to making my own jig cable. Just need some advice after getting download mode should i first try repairing recovery mode by flashing Aries_P-SBL.tar.md5 or should i direct try flashing XXJPU via ODIN?
How did you resolve this i have the same here with my girlfriends samsung galaxy s. I can't come in download and recovery moe anymore. Pls have same one a solution?
whats crazy for is when this happened Odin still recognized my phone(there was a com 3 showing) so i decided to hit start and it actually worked for me.
cgingermany said:
whats crazy for is when this happened Odin still recognized my phone(there was a com 3 showing) so i decided to hit start and it actually worked for me.
Click to expand...
Click to collapse
This worked for me as well. I never thought to try the download anyway with that screen showing.
Thanks for the tip.
I have a big problem! i wanted to flash with Heimdall... I tested a rom, but not satisfied, i wanted to test another one and my Samsung Galaxy Tab don't want to turn on...
No Samsung logo, No Galaxy Tab logo... Nothing! Like the Samsung Galaxy tab don't want to turn on when i push the ON/OFF Button!!!
What can i do???
Please help!
Please HELP!
EmryX said:
Please HELP!
Click to expand...
Click to collapse
If you're able to provide information as to exactly what you did to get your device in this state that would be immensely helpful in regards to diagnosing the problem. However you'll probably be able to recover your device using a custom jig.
I can not be more explicit. I wanted to try a rom. Wasn't satisfied so i downloaded another one (with cache file, database file, bootloader, etc... ) but the file have been dowloaded too quickly (i think the zip file was corrupted...)
So i did the flash, and my tab don't wake up. I don't have a brick state (with the usb and pc logo). I don't have the samsung/galaxy tab logo. Ihave nothing on my screen. Like my on/off button was broken...
And whatever i do(like the combo on/off with the volume down), my computer don't recognize the tab. So i can't flash it again.
EmryX said:
I can not be more explicit.
Click to expand...
Click to collapse
Well you're going to have to be if you want anyone's help.
What files did you flash? Which software did you use? Which version? Were you given errors? How did you flash the files?
Please provide a detailed step by step run-down of exactly what you did.
I can't remember, and i'm french, i can't find the right word to explain the situation...
I flashed my tab with HEIMDALL (the last version on the website) i think the problem is when i wanted to flash with the file EURO.pit (i choose this file in the "bootloader" category of the software HEIMDALL).
The problem... My computer can't recognyze the tab because i can't turn on the tab, so... I don't know what can i do.
EDIT: And HEIMDALL don't tell me any error. Just "Flash Complete, Rebooting"
EDIT 2: I think i used the wrong bootloader...
Up?
What can i do? Is a batterie problem?
Let your Tab charging for 5 Hours and then try again.
Sounds like you've flashed a bootloader not designed for your tablet. Luckily all Galaxy S devices store a backup copy of the secondary bootloader which is utilised when a certain resistance is detected on the USB port. You can send it off to Samsung and they'll repair it, but they might charge you. The other option is to build your own custom jig which will activate the backup secondary bootloader.
now ive got the same problem. i tried a custom recovery i found in the "bible" sticky...clock work wasnt working when i was doing adb commands. the recovery i tried is called 3e. all it would do is reboot, t-mo logo and then bootloader words would flash very quick and black screen (backlit) press the back button and i got the triangle droid.
then i got it to go into download mode and tried a rom with odin this is the rom if it helps
GT-P1000_P1000XXJME_P1000OXAJME_P1000XXJMB_P1000XXJME_XX_ITV.zip.enc
unzipped, selected in pda and clicked start. failed at the last second and the downloading android screen on tab was stuck so i powered it down.
stupid stupid stupid!
now it wont turn on period, i get nothing from usb connection or secret button presses.
ill try the "rig" tomorrow, but how will i hack up this galaxy usb to work? the guide says micro usb but obviously thats for a phone.
please help if you can, i just got this thing today
@Benjamin: I can do a custom jig for a galaxy tab?
EDIT: But i don't think the jig will help me..
"If your phone screen is always black, that is it does not display the white Galaxy S/Samsung/AT&T logo when you switch it on, then sorry, this jig will not help you. "
HELP please? Can i do a custom jig for the galaxy tab? And How?
press and hold the power button for 10 second make sure it totally off
then try to enter download mode
if u are able to enter download mode
flash roto jme v4
if it a battery problem
i think it may be battery flat, try plug it in to the charger see if it work after 10 min
suprajztwenty said:
now ive got the same problem. i tried a custom recovery i found in the "bible" sticky...clock work wasnt working when i was doing adb commands. the recovery i tried is called 3e. all it would do is reboot, t-mo logo and then bootloader words would flash very quick and black screen (backlit) press the back button and i got the triangle droid.
then i got it to go into download mode and tried a rom with odin this is the rom if it helps
GT-P1000_P1000XXJME_P1000OXAJME_P1000XXJMB_P1000XXJME_XX_ITV.zip.enc
unzipped, selected in pda and clicked start. failed at the last second and the downloading android screen on tab was stuck so i powered it down.
stupid stupid stupid!
now it wont turn on period, i get nothing from usb connection or secret button presses.
ill try the "rig" tomorrow, but how will i hack up this galaxy usb to work? the guide says micro usb but obviously thats for a phone.
please help if you can, i just got this thing today
Click to expand...
Click to collapse
almost the same thing happened to me. how ever mine will not turn on at all. it gets warm when it charging and then cold when the battery is dead. i have it sitting until it drains.
i am waiting to hear from Samsung. I will keep you posted.
Can anyone out there help. I tried to load overcome's rom and it passed all the steps, and then the screen just went dead
Try to power on together with volume down bro. Lets see if the android image with broom will pop.
Sent from my GT-P1000 using XDA App
I accidentally bricked my galaxy tab when I try to install Overcome Ware and I accidentally unplug the usb cable in the middle of the progress. I cannot boot into downloading mode no matter how hard I try. My tab only show a phone icon, an exclamation mark and a pc. Does my tab brick forever or what? Can you help me out. I'm very appreciate your help. Thank you so much for reading my thread.
That mode is also one type of download mode. Flash a stock rom like roto jmi with repartition.
i was DL new ROM to and my pc died and brickedmy P1000 and i can only see the phone ! PC sign if i have it plugged into electricity and ODIN doesnt recognize it if i plug it in to intall official 2.3.3.
what should i do?
I bricked my tab while flashing many times.
Try this:
1. Turn off your Tab then turn on.
2. Run Odin and connect to PC (Odin will not recognise it but its OK).
3. Just install the .PIT file (It'll be installed).
4. Your Tab will restart and you'll see "SAMSUNG".
5. Now goto download mode and install PDA,CSC or whatever else you want.
Done !
omr911 said:
I bricked my tab while flashing many times.
Try this:
1. Turn off your Tab then turn on.
2. Run Odin and connect to PC (Odin will not recognise it but its OK).
3. Just install the .PIT file (It'll be installed).
4. Your Tab will restart and you'll see "SAMSUNG".
5. Now goto download mode and install PDA,CSC or whatever else you want.
Done !
Click to expand...
Click to collapse
Thanks for your instruction ! You saved my life
help pls..from asia Kuala Lumpur
I accidentally bricked my galaxy tab P1000 when I try to install 3.2 frimware and I accidentally unplug the usb cable in the middle of the progress. Now I cannot turn ON/DL Mode/Recovery Mode no matter how hard I try.it only black like no battery. pls help
if you can't boot into download mode, chuck your tab into the rubbish bin or use it as a paperweight. its a perma brick, nuff said.
agentz said:
I accidentally bricked my galaxy tab P1000 when I try to install 3.2 frimware and I accidentally unplug the usb cable in the middle of the progress. Now I cannot turn ON/DL Mode/Recovery Mode no matter how hard I try.it only black like no battery. pls help
Click to expand...
Click to collapse
Plug it in the mains and let it sit there for a day... Then try again.
I wonder how come ppl 'unplug-by-accident'... Ever heard of concentration, awareness etc ... ?
agentz said:
I accidentally bricked my galaxy tab P1000 when I try to install 3.2 frimware and I accidentally unplug the usb cable in the middle of the progress. Now I cannot turn ON/DL Mode/Recovery Mode no matter how hard I try.it only black like no battery. pls help
Click to expand...
Click to collapse
If u have warranty,claim it at Sammy service center telling them nothing about ur flashing business.
If not,read these threads and try one by one.
http://forum.xda-developers.com/showthread.php?t=1133590
http://forum.xda-developers.com/showthread.php?t=1127978
http://forum.xda-developers.com/showthread.php?t=1214955
If nothing works,still try sammy service center.[Ur tab is worth of that service cost, isn't it?]
@IcedCube
What u told could have been told in a gentler way,couldn't it?
It seems that u have acquired ur Tab only yesterday and here u r giving ur "Valuable 2 cents" at a newbie.
BTW, our tab cannot be Hard bricked that easily and even PC-triangle-Device screen as well as a Blank screen also r Download modes for our Tab.
After a bad/stupid ODIN flash my tab now only shows the "Samsung galaxy tab" for 1 sec and turns of again.
I do think i some how i flash a wrong ROM to the device.
And to make things even more bad, my volume down button do NOT work.
So i guess my only solution is a RIFF JTAG solution... anyone here had success with this solution ??
unubtanium said:
After a bad/stupid ODIN flash my tab now only shows the "Samsung galaxy tab" for 1 sec and turns of again.
I do think i some how i flash a wrong ROM to the device.
And to make things even more bad, my volume down button do NOT work.
So i guess my only solution is a RIFF JTAG solution... anyone here had success with this solution ??
Click to expand...
Click to collapse
If it still fires up, no need for that. Just start Odin, plug in the Tab and start it up. If Odin recognises it, you're on the safe side. But first get the Overcome GB-restock v5 and have it ready for a new 'blind' flash.
dirlan2001 said:
If it still fires up, no need for that. Just start Odin, plug in the Tab and start it up. If Odin recognises it, you're on the safe side. But first get the Overcome GB-restock v5 and have it ready for a new 'blind' flash.
Click to expand...
Click to collapse
Overcome GB-restock v5 have been downloaded and ready for flashing.
But i am very sure that my TAB is hardbricked, because it ONLY shows the samsung logo for max 1 sec and the turnes off. And as mentioned my volume down button do NOT work
And i have tried to have it connected to the pc with ODIN up and running while i turn it on for that second but odin do not see it and it is off again before you can blink...
So JTAG service is the solution i think.. Just wish there was someone in London that did that.
unubtanium said:
Overcome GB-restock v5 have been downloaded and ready for flashing.
But i am very sure that my TAB is hardbricked, because it ONLY shows the samsung logo for max 1 sec and the turnes off. And as mentioned my volume down button do NOT work
And i have tried to have it connected to the pc with ODIN up and running while i turn it on for that second but odin do not see it and it is off again before you can blink...
So JTAG service is the solution i think.. Just wish there was someone in London that did that.
Click to expand...
Click to collapse
Hmmm, weird... as long as the Samsung logo appears it's not bricked. Maybe the Google SDK can help then. It's including very basic ADB support, which should give you a way to connect the PC and your phone.
If not, sorry and good luck
dirlan2001 said:
Hmmm, weird... as long as the Samsung logo appears it's not bricked. Maybe the Google SDK can help then. It's including very basic ADB support, which should give you a way to connect the PC and your phone.
If not, sorry and good luck
Click to expand...
Click to collapse
Thanks for the help and now i will go out on the big world wide web and see if can learn about Google SDK and basic ADB support..
And when that is done lets hope it will be on long enough to receive and execute an command like this one: adb reboot download or something like that..
If no go there i will send it it of for JTAG
Damn stupid read and write Dyslexia, i did not see the differers before the flash was done!"!!!%£$£$%£
GT-I9000_NEE_1_20110311161226
GT-P1000_NEE_1_20110618152048
As you can see P1 and I9 are being flipped but still did think it was p1000 i flashed damn it... Anyway, there is always JTAG if adb do not work. and i am not holding my breath for for it because it has software for a I9000 on it and not a P1000
---------- Post added at 12:29 PM ---------- Previous post was at 11:49 AM ----------
Mkay learning done:
And it all points to JTAG.
Because adb do not find the device, and i think that is becuase it turns it selv off verry quickly.
Command:
C:\Program Files\Android\android-sdk\platform-tools>adb reboot download
error: device not found
---------- Post added at 12:56 PM ---------- Previous post was at 12:29 PM ----------
I found this over at http://forum.xda-developers.com/showthread.php?t=819551 :
If the phone's bootloader is still intact, that is you see at least the white Galaxy S/Samsung/AT&T logo or the "PC ! Phone" logo on the screen, you should be able to force it into download mode by connecting a homemade jig that simulates the Samsung "Anyway" field test jig. You can make this jig using a micro USB plug and a resistor.
And as mentiond i do see the Galaxy TAB samsung logo for 1/2 secound and it turns it self off. So is this conformation that my bootloader is intact?? If so HOW the BLIPP do i get my tab into download mode withoud my volum down button...
unubtanium said:
Damn stupid read and write Dyslexia, i did not see the differers before the flash was done!"!!!%£$£$%£
GT-I9000_NEE_1_20110311161226
GT-P1000_NEE_1_20110618152048
As you can see P1 and I9 are being flipped but still did think it was p1000 i flashed damn it... Anyway, there is always JTAG if adb do not work. and i am not holding my breath for for it because it has software for a I9000 on it and not a P1000
---------- Post added at 12:29 PM ---------- Previous post was at 11:49 AM ----------
---------- Post added at 12:56 PM ---------- Previous post was at 12:29 PM ----------
I found this over at http://forum.xda-developers.com/showthread.php?t=819551 :
If the phone's bootloader is still intact, that is you see at least the white Galaxy S/Samsung/AT&T logo or the "PC ! Phone" logo on the screen, you should be able to force it into download mode by connecting a homemade jig that simulates the Samsung "Anyway" field test jig. You can make this jig using a micro USB plug and a resistor.
And as mentiond i do see the Galaxy TAB samsung logo for 1/2 secound and it turns it self off. So is this conformation that my bootloader is intact?? If so HOW the BLIPP do i get my tab into download mode withoud my volum down button...
Click to expand...
Click to collapse
As I said before as long as there's a lifeform on screen, it's still not bricked. Anyway, the method described to build a 'fix' also means you don't need buttons to press. The problem for the Tab will be to find an USB-to-microUSB adapter that will plug into the Tab's cable. Once that hurdle taken, you'll be in Download mode and on your way to Odin's Wizardry...
Cheers,
dirlan2001 said:
As I said before as long as there's a lifeform on screen, it's still not bricked. Anyway, the method described to build a 'fix' also means you don't need buttons to press. The problem for the Tab will be to find an USB-to-microUSB adapter that will plug into the Tab's cable. Once that hurdle taken, you'll be in Download mode and on your way to Odin's Wizardry...
Cheers,
Click to expand...
Click to collapse
Thanks for pounding in to my head that it is not bricked and that there are a chance to get it in to download mode... Now i am going to make this usb thing happen..
"i Have Odin ready with all the files selected and ready to push tha button"
My Galaxy tab (Korean Made) GT P1000 "GOON TOO SOON"
Hello;
I used Odin to mistakenly flashed my Samsung galaxy tab GT1000 with wrong firmware; I end-up with black screen no boot. Odin was able to detect the device after 3 times; after the third flash Odin can not detect the device any more. all efforts proved abortive in other to connect the device back. If I power the device it will show flash light and on with no display on the screen after 5 seconds the light will off but the device will still ON with blank screen I can not get my device to download mode even if I try to it will still power up in blank screen. so please what is your advice on this mess?
Thanks.
nuti1025 said:
I accidentally bricked my galaxy tab when I try to install Overcome Ware and I accidentally unplug the usb cable in the middle of the progress. I cannot boot into downloading mode no matter how hard I try. My tab only show a phone icon, an exclamation mark and a pc. Does my tab brick forever or what? Can you help me out. I'm very appreciate your help. Thank you so much for reading my thread.
Click to expand...
Click to collapse
Connect the usb, HOLD VOLUME UP + DOWN , then hold POWER BUTTON for 5 secs ... Let it reboot to recovery. Reboot the phone.. And reflash -_- ...I've done this many times, but not sure if it works to u
So I accidentally flashed an AT&T firmware (Captivate) on a Korean-Type Samsung Galaxy S. To be more specific and detailed, I've written everything below.
Firmware Flashed: 2.3.5 SGH-I897_I897UCKJ1_UC_ATT
Phone I Flashed: SHW-M110S)
My Problem: I ca'nt get into download mode to flash the correct firmware to get it to boot correctly. It turns on, and I can get into recovery mode, but not download mode. The phone turns on, and goes through all the startup screens, but gets stuck on the colorful "S" screen, then reboots again. The second time it boots, it goes past the "S" screen then the screen just turns black. I have no idea what to do.
Any help? Advice? Or suggestions?
Thanks so much in advance
Do you have CWM recovery? If so you can copy a rom in the sd with your computer, plug it in the phone, mount the external_sd and load it from there.
Else, you can get Download mode with an usb cable, search in youtube, there are some interesting videos.
May be you need Usb Jig to go into download mode Instructions below
Needed materials:
1)SgS I9000 (obviously)
2)Microusb Pin with 100*3ohm+1ohm Connected in series to pin 4 and 5Diy tutorial here(otherwise buy it in ebay)
remove your battery fro about 2 min then plug in the usb jig it powers on automatically otherwise just do the normal vol down+enter+power
viola we got download mode
after that download your rom thru odin using a pc
Sorry for my bad English,If i spelled something wrong or a grammatical mistake please correct me
bv_abhi said:
viola we got download mode
after that download your rom thru odin using a pc
Sorry for my bad English,If i spelled something wrong or a grammatical mistake please correct me
Click to expand...
Click to collapse
Your English is quite good, your French however not so..
"viola" should be "voilà"
UPDATE: Now the phone won't turn on at all. Not even when its plugged in to the wall or the computer...
Sent from my GT-I9100 using XDA App
Use jig method it will work
be sure to take of the battery for 1 min (check the battery voltage using a multimeter it should be around 3.7 above voltsotherwise charge it in ur phone it does charge)and reinsert it and then plug the usb jig NOT THE USB Cable and it powers on automatically otherwise boot it up using vol down+enter+power while the usb jig is connected
Thanks for the help everyone. I've decided to just buy a usb jig after all... Since most of the replies say to do so. I'll order one on ebay, but my last question is does it matter which one I get? I see a lot of Samsung galaxy s2 and galaxy s usb jigs. Mine is the Korean type i9000 and I also have an s2. Is the i9000 usb jig compatible with my Korean one? And there's this usb jig that says its for a galaxy s i9000 AND a galaxy s2 i9100, can I just buy that one for both of my phones?
Sent from my GT-I9100 using XDA App
http://forum.xda-developers.com/showthread.php?t=1129457 Take a look and decide your self
If I helped you Give me a thanks
Adam outler's unbrickable mod WILL fix your phone if jig fails.
Hello. I'm flashing ROM on Samsung Galaxy ACE S5830. And now when I went to shut down, reboot .. can not work .. there are no signs that work, in general it can not work. How to solve this problem !! Help me!
#Selfiee said:
Hello. I'm flashing ROM on Samsung Galaxy ACE S5830. And now when I went to shut down, reboot .. can not work .. there are no signs that work, in general it can not work. How to solve this problem !! Help me!
Click to expand...
Click to collapse
How did you do it? Which rom did you flashed? Which recovery did you use?
Viper The Ripper said:
How did you do it? Which rom did you flashed? Which recovery did you use?
Click to expand...
Click to collapse
Put the rom on the SD Card,, Factory Reset, devnik ChaCha. and install rom. and went to reboot and shut down and now can not get in anywhere
1. SGS3 V1.0 ROM
2. CWM v 5.0.2.6
#Selfiee said:
Put the rom on the SD Card,, Factory Reset, devnik ChaCha. and install rom. and went to reboot and shut down and now can not get in anywhere
1. SGS3 V1.0 ROM
2. CWM v 5.0.2.6
Click to expand...
Click to collapse
#Selfiee said:
Hello. I'm flashing ROM on Samsung Galaxy ACE S5830. And now when I went to shut down, reboot .. can not work .. there are no signs that work, in general it can not work. How to solve this problem !! Help me!
Click to expand...
Click to collapse
Is your phone booting into download/recovery??
Mandark52 said:
Is your phone booting into download/recovery??
Click to expand...
Click to collapse
Now I can not enter
#Selfiee said:
Now I can not enter
Click to expand...
Click to collapse
You can try and use a USB JIG to boot into download mode and hence flash stock firmware. Hope this helps.
All the best.
Hy
Mandark52 said:
You can try and use a USB JIG to boot into download mode and hence flash stock firmware. Hope this helps.
All the best.
Click to expand...
Click to collapse
When I put the USB does not show me that Connected Mobile. And when I get into Odin does the Connected Mobile it on to write ..
#Selfiee said:
When I put the USB does not show me that Connected Mobile. And when I get into Odin does the Connected Mobile it on to write ..
Click to expand...
Click to collapse
hmmm so you mean that you connected the USB JIG to your phone to boot into download mode and then connected it to your pc right? If so then install these drivers - http://forum.xda-developers.com/showthread.php?t=1982287 .
Be sure to uninstall KIES.
All the best.
#Selfiee said:
When I put the USB does not show me that Connected Mobile. And when I get into Odin does the Connected Mobile it on to write ..
Click to expand...
Click to collapse
Go to your phone shop and ask if they sell a "USB jig " for you phone , or search E-Bay for "USB jig for Samsung Galaxy Ace " and buy one,
not much money.
It is a small plug in device, that ONLY attaches to the phone.
Take battery out of phone, put battery back in, do not push any buttons.
plug in USB jig device........... wait for few seconds.
If it works, your screen on the phone will show download mode.............. unplug the USB JIG.
Do not touch buttons on phone.
Start Odin on your computer.
Connect your phone to the PC with USB CABLE, and flash stock rom for your phone, like this :-
http://forum.xda-developers.com/showthread.php?t=1225493
Later, when phone works again, you can try install your custom rom again.
flashrommad said:
Go to your phone shop and ask if they sell a "USB jig " for you phone , or search E-Bay for "USB jig for Samsung Galaxy Ace " and buy one,
not much money.
It is a small plug in device, that ONLY attaches to the phone.
Take battery out of phone, put battery back in, do not push any buttons.
plug in USB jig device........... wait for few seconds.
If it works, your screen on the phone will show download mode.............. unplug the USB JIG.
Do not touch buttons on phone.
Start Odin on your computer.
Connect your phone to the PC with USB CABLE, and flash stock rom for your phone, like this :-
http://forum.xda-developers.com/showthread.php?t=1225493
Later, when phone works again, you can try install your custom rom again.
Click to expand...
Click to collapse
I will try, thank you very much, I hope to succeed