Database Develop

[OFFICIAL] Firmware selection for SM-T700/SM-T800 Variants

Hello my friends! I decided myself to creat a thread with official stock firmwares of our Galaxy Tab S. I don't touch it, all is stock! I'm grabbing this files from www.sammobile.com and than upload it on faster hoster
If it is wished by some users, i can extract the md5.tar files and upload different files (boot.img, system.img etc.)
What's in it:​I will add the latest firmwares provided by Samsung, this means, always latest built date, highest changelog, latest modem, bootloader etc. I will creat different mirrors, I will add www.mega.co.nz I think
All firmwares are without branding! And it don't plays a role, if the firmwares are from Russia, New Zealand or Germany. The only difference between them is the preinstalled language and keyboard language. And that's all. You can easily change it
This will not tripp your Knox warranty!! It's an official update! Knox will stay 0.
Supported devices:​
SM-T700
SM-T705
SM-T800
SM-T805
Instructions:​
Flash it at your own risk, I'm not responsible for any damaged device!
1. Download the needed firmware from below and extract the zip to get the odin files
2. Download latest odin from here!
3. Open Odin, click on AP and add AP file. Same for BL, CP and CSC! Add all 4 files to odin (except wifi versions don't have any modem)
4. Make sure you installed all samsung drivers
5. Shut down your Tab S.
6. Open download mode by holding volume down, home button and power button.
7. Connect it to your PC.
8. LEAVE EVERY THING AS IT IS IN ODIN, OTHERWISE THERE WILL BE A CATASTROPHE (If you select something wrong.)
9. When your tablet is connected, there will shine a bluenbox in odin.
10. Hit start and wait
11. It will reboot and you will get the latest firmware from samsung.
Download Center:​SM-T700:
Latest MM rom for SM-T700
Model SM-T700
Model name GALAXY TabS
Country Chile
Version Android 6.0.1
Changelist 9541789
Build date Tue, 18 Oct 2016 12:17:02 +0000
Security Patch Level 2016-10-01
Product code CHO
PDA T700XXU1CPJ3
CSC T700UVS1CPJ3
SM-T705:
Latest MM rom for SM-T705
Model SM-T705
Model name GALAXY TabS
Country Bulgaria
Version Android 6.0.1
Changelist 8816210
Build date Thu, 13 Oct 2016 03:20:58 +0000
Security Patch Level 2016-10-01
Product code BGL
PDA T705XXU1CPJ4
CSC T705OXX1CPJ1
SM-T800:
Latest MM rom for SM-T800
Model SM-T800
Model name GALAXY Tab S
Country Italy
Version Android 6.0.1
Changelist 8965996
Build date Mon, 31 Oct 2016 10:08:19 +0000
Security Patch Level 2016-11-01
Product code ITV
PDA T800XXU1CPK1
CSC T800ITV1CPI1
SM-T805:
Latest MM rom for SM-T805
Model SM-T805
Model name GALAXY Tab S
Country Italy
Version Android 6.0.1
Changelist 8816210
Build date Fri, 21 Oct 2016 11:03:56 +0000
Security Patch Level 2016-10-01
Product code ITV
PDA T805XXU1CPJ5
CSC T805ITV1CPJ2​
Credits:​Samsung for the firmware
Sammobile.com for the links
mega for their servers xD​

All firmwares are now online

This took me more than 20 hours to upload and download. I'm not mirroring these firmwares to other websites. If it doesn't work, use a proxy such as cybershell.biz or use a vpn
SM-T807T Firmware: https://mega.co.nz/#!ylYEBA4D!yWUPtuT60dLCIy_zCN_rqnN2L319oZYSCSFtOC_Pv6Q
Sprint SMT807P firmware here: https://docs.google.com/file/d/0B5DZenb7A53caXhNQkhMb0NkMFU/edit?usp=docslist_api

DUHAsianSKILLZ said:
If you want you can use my links from my thread. I have the latest builds up for some and even a twrp backup. Thought you might want to use then since your thread are mor organised
---------- Post added at 06:51 PM ---------- Previous post was at 06:51 PM ----------
http://forum.xda-developers.com/showthread.php?t=2934279
Click to expand...
Click to collapse
Thanks, I will wait until my uploads are finished and than upload it myself

LTE versions of both Tablets (SM-T705 and SM-T805) are online!

Tkkg1994 said:
LTE versions of both Tablets (SM-T705 and SM-T805) are online!
Click to expand...
Click to collapse
Glad you have the lte ones! I never got the chance to do them and only did the wifi ones. These take time lol.

DUHAsianSKILLZ said:
Glad you have the lte ones! I never got the chance to do them and only did the wifi ones. These take time lol.
Click to expand...
Click to collapse
I think you got other LTE versions than me, becaus I uploaded the european version and you maybe will upload the US version..:highfive:

Deleted

If I follow the procedure will it be like a dirty flash (I'll mantain all my data/apps/confs) or will I be forced to reinstall everything?
Thanks

dagosjt said:
If I follow the procedure will it be like a dirty flash (I'll mantain all my data/apps/confs) or will I be forced to reinstall everything?
Thanks
Click to expand...
Click to collapse
It will be like a dirty flash. You won't lose any data. Hit thanks bro :highfive:

All firmwares now online! If someone need a special one or another mirror, ask me

Tkkg1994 said:
All firmwares now online! If someone need a special one or another mirror, ask me
Click to expand...
Click to collapse
Your quick! Do you have google fiber or something lol.

DUHAsianSKILLZ said:
Your quick! Do you have google fiber or something lol.
Click to expand...
Click to collapse
No I haven't. I live in Switzerland No google fiber here xD

Got an S5 or an friend how got one? I have the officail update to android 5.0 Lollipop! Thread is hear:
http://forum.xda-developers.com/galaxy-s5/orig-development/official-lollipop-5-0-sm-g900f-t2962141

flash is faile my tab is t700 rooted and twrp
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T700XXU1ANK2_T700XAR1ANJ1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

u9689 said:
flash is faile my tab is t700 rooted and twrp
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T700XXU1ANK2_T700XAR1ANJ1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Try Odin 1.84 or another firmware

u9689 said:
flash is faile my tab is t700 rooted and twrp
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T700XXU1ANK2_T700XAR1ANJ1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Looks like your tablet was disconnected ? And added again?
Try Odin1.85

My odin 3.9. But after flaahsing cf auto root ot work thans any way

I'm really quite new to Samsung tabs, does this firmware include stock software/ROM as well? Looking to get back to stock from custom ROM.

meleelord said:
I'm really quite new to Samsung tabs, does this firmware include stock software/ROM as well? Looking to get back to stock from custom ROM.
Click to expand...
Click to collapse
Yes all these firmwares are stock firmwares for the tab s. Just pick your model, and the right country of your device. Then flash with Odin!

Differences between Sm-t815 and Sm-t815y

Hi guys
I bought a galaxy tab s2 that Is marked sm-t815y. I think it's the asian version of the tablet. Do you think there are hardware differences between 815 and 815y? I'd like to upgrade the firmware to an european version but i don't know if it' supported.
Thank you in advance

Panso76 said:
Hi guys
I bought a galaxy tab s2 that Is marked sm-t815y. I think it's the asian version of the tablet. Do you think there are hardware differences between 815 and 815y? I'd like to upgrade the firmware to an european version but i don't know if it' supported.
Thank you in advance
Click to expand...
Click to collapse
You most likely can. Flash the firmware you want but make sure you have your firmware handy in case it doesn't work.

mmhh... no good news for me... i tried to flash the firmware for sm-t815 but didn't work. then i tried to flash the original firmware (or so i think) and now i can't start the tablet. i can only make it start in download mode.
I controlled before the flash and the data were:
ap: T815YDVU1AOG6
cp: T815YDVU1AOG6
csc: T815YOLB1AOG6
So i flashed the firmware with code T815YDVU1AOG6_T815YOLB1AOG6_T815YDVU1AOG6_HOME.tar taken from sammobile
i thought it was correct but doesn't work.
odin log is:
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Added!!
<ID:0/009> Odin engine v(ID:3.1100)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> SingleDownload.
<ID:0/009> sboot.bin
<ID:0/009> NAND Write Start!!
<ID:0/009> Transmission Complete..
<ID:0/009> Now Writing.. Please wait about 2 minutes
<ID:0/009> Receive Response from boot-loader
<ID:0/009> boot.img
<ID:0/009> Transmission Complete..
<ID:0/009> Now Writing.. Please wait about 2 minutes
<ID:0/009> Receive Response from boot-loader
<ID:0/009> recovery.img
<ID:0/009> Transmission Complete..
<ID:0/009> Now Writing.. Please wait about 2 minutes
<ID:0/009> Receive Response from boot-loader
<ID:0/009> system.img
<ID:0/009> Transmission Complete..
<ID:0/009> Now Writing.. Please wait about 2 minutes
<ID:0/009> Receive Response from boot-loader
<ID:0/009> Transmission Complete..
<ID:0/009> Now Writing.. Please wait about 2 minutes
<ID:0/009> FAIL!
<ID:0/009>
<ID:0/009> Receive Response from boot-loader
<OSM> All threads completed. (succeed 0 / failed 1)
Do you think it's the wrong firmware or something else??
thank you

Panso76 said:
mmhh... no good news for me... i tried to flash the firmware for sm-t815 but didn't work. then i tried to flash the original firmware (or so i think) and now i can't start the tablet. i can only make it start in download mode.
Click to expand...
Click to collapse
See there : http://androidcustomrom1.blogspot.fr/2015/08/samsung-galaxy-tab-s2-97-sm-t815y.html
BTW, this link coming for Singapore 815Y and At&T sold this model too. And the bootloader is locked for AT&T and Verizon one... May be it's your case.

So i could solve flashing a Verizon firmware?

Panso76 said:
So i could solve flashing a Verizon firmware?
Click to expand...
Click to collapse
Verizon coming with 5.1.1. Tell us more about your device (country, provider...).

Panso76 said:
mmhh... no good news for me... i tried to flash the firmware for sm-t815 but didn't work. then i tried to flash the original firmware (or so i think) and now i can't start the tablet. i can only make it start in download mode.
I controlled before the flash and the data were:
ap: T815YDVU1AOG6
cp: T815YDVU1AOG6
csc: T815YOLB1AOG6
So i flashed the firmware with code T815YDVU1AOG6_T815YOLB1AOG6_T815YDVU1AOG6_HOME.tar taken from sammobile
i thought it was correct but doesn't work.
odin log is:
Enter CS for MD5..
Binary Check MD5.. Do not unplug the cable..
Please wait..
Checking MD5 finished Sucessfully..
Leave CS..
Added!!
Odin engine v(ID:3.1100)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
SingleDownload.
sboot.bin
NAND Write Start!!
Transmission Complete..
Now Writing.. Please wait about 2 minutes
Receive Response from boot-loader
boot.img
Transmission Complete..
Now Writing.. Please wait about 2 minutes
Receive Response from boot-loader
recovery.img
Transmission Complete..
Now Writing.. Please wait about 2 minutes
Receive Response from boot-loader
system.img
Transmission Complete..
Now Writing.. Please wait about 2 minutes
Receive Response from boot-loader
Transmission Complete..
Now Writing.. Please wait about 2 minutes
FAIL!
Receive Response from boot-loader
All threads completed. (succeed 0 / failed 1)
Do you think it's the wrong firmware or something else??
thank you
Click to expand...
Click to collapse
Are you loading the firmware tar into the AP slot and which version of odin are you using?
From the output it seems bootloader, boot and recovery flash successfully, but the system.img fails.
Usually because the image has the wrong signature and is not intended for your device.
This begs the question: Why didn't you make a full backup BEFORE flashing anything?
This one thing could have saved you a massive headache.

I solved downloading another firmware version. Thank you to everybody helped me. At the end i can confirm that t815 firmwares are not compatibles with t815y

Panso76 said:
I solved downloading another firmware version. Thank you to everybody helped me. At the end i can confirm that t815 firmwares are not compatibles with t815y
Click to expand...
Click to collapse
Great! Which version did you use? May be it will help someone else...

The one in your post

Hi is it correct to say the T815Y does not support the UK LTE Band B20, 800mhz ? Does any one know how many models of T815 there are and the frequencies supported.. Eg C supports TTD channels and Y supports a TTD channel....
Thx

Reflashing
Hi,
I will reflash factory Firmware, i have rottet and have custom recovery. I already have download Firmware and odin can somebody explain me please hove to do it i will be greatfull thanks everybody :good:

14ay said:
Hi is it correct to say the T815Y does not support the UK LTE Band B20, 800mhz ? Does any one know how many models of T815 there are and the frequencies supported.. Eg C supports TTD channels and Y supports a TTD channel....
Thx
Click to expand...
Click to collapse
As far as I know you are correct. No B20 on the Y variant. If you want B20 you should get the N variant (which swaps B28 for B20).

Can i flash a T 810 5.1.1. Rom on my T815. I dont need to use LTE or a sim card anyways. Let me know

myphone12345 said:
As far as I know you are correct. No B20 on the Y variant. If you want B20 you should get the N variant (which swaps B28 for B20).
Click to expand...
Click to collapse
Any luck on confirming this?

Also the Y version has UMTS 3G AWS band 4 (1700/2100) whereby the others dont.

Unable to flash Stock ROM for Note 5 N9208. Need help.

I have this error message when I use Odin3 v3.10.7. Anyone can advise what should I do to flash stock ROM on my device. Thanks in advance for all the help.
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1100)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> cm.bin
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

dannche said:
I have this error message when I use Odin3 v3.10.7. Anyone can advise what should I do to flash stock ROM on my device. Thanks in advance for all the help.
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1100)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> cm.bin
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
from this post http://forum.xda-developers.com/note5/help/galaxy-note-5-sm-n9208-t3198411 I saw this:
1)download the package and unzip.
2) INSTALL CROM service apk run and following the instruction to unlock
3)go setting > lock screen and security>find my mobile> uncheck Remote control and Global location service
4)go setting>develop option>turn on oem unlock
5)use odin and flash N9208-root(0901)
however, I am by no means an expert.. would suggest searching and reading and reading the multiple threads here..

p33l05 said:
from this post http://forum.xda-developers.com/note5/help/galaxy-note-5-sm-n9208-t3198411 I saw this:
1)download the package and unzip.
2) INSTALL CROM service apk run and following the instruction to unlock
3)go setting > lock screen and security>find my mobile> uncheck Remote control and Global location service
4)go setting>develop option>turn on oem unlock
5)use odin and flash N9208-root(0901)
however, I am by no means an expert.. would suggest searching and reading and reading the multiple threads here..
Click to expand...
Click to collapse
I have no problem rooting my device. I followed the same procedure as describe in this forum. Now I want to flash back the original stock ROM (basically I want to unroot my device) but it failed at the below:
<ID:0/007> NAND Write Start!!
<ID:0/007> cm.bin
<ID:0/007> FAIL!

Not sure this will help. I got this message on my Note 5 after Odin failed.
ODIN MODE
DOWNLOAD SPEED: FAST
PRODUCT NAME: SM-N9208DX
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
FRP LOCK: OFF
Secure Download : Enabled
KNOX WARRANTY VOID: 1 (0x0301)
RP SWREV: B:2 K:0 S:0
SW REV. CHECK FAIIL. DEVICE: 2, BINARY: 1

dannche said:
Not sure this will help. I got this message on my Note 5 after Odin failed.
ODIN MODE
DOWNLOAD SPEED: FAST
PRODUCT NAME: SM-N9208DX
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
FRP LOCK: OFF
Secure Download : Enabled
KNOX WARRANTY VOID: 1 (0x0301)
RP SWREV: B:2 K:0 S:0
SW REV. CHECK FAIIL. DEVICE: 2, BINARY: 1
Click to expand...
Click to collapse
I think I might have found the problem. SW REV. CHECK FAIIL. DEVICE: 2, BINARY: 1 message could be because I am using an old Stock ROM. A few days ago, I did OTA upgrade then I root it. Now when I try to unroot it with a lower version of the Stock ROM, it will not work.
Any advise where I can get the latest Stock ROM that would be a great help.

dannche said:
I think I might have found the problem. SW REV. CHECK FAIIL. DEVICE: 2, BINARY: 1 message could be because I am using an old Stock ROM. A few days ago, I did OTA upgrade then I root it. Now when I try to unroot it with a lower version of the Stock ROM, it will not work.
Any advise where I can get the latest Stock ROM that would be a great help.
Click to expand...
Click to collapse
Here you go. SamMobile

B.U.M said:
Here you go. SamMobile
Click to expand...
Click to collapse
Thanks. With the new Stock ROM, the problem was resolved.

dannche said:
Thanks. With the new Stock ROM, the problem was resolved.
Click to expand...
Click to collapse
Great. glad you got it working again. did you use the OJ3 or the old OH4?

hallo, i try to flash taiwan firmware on my n9208 but odin not flash anithing, so i read the instruction but when i downloaded CROM 1.0.4 from Galaxy apps the apk don't work and close .
so i can't flash anithing with odin ???
Thanks

hi everyone
i need help i tried to upgrade my Tab GT-N8010 through Kies after download the file it stuck on downloading and do not turn off target.
i tried hard reset as per procedure but reboot again.
please advise me what i can it.
---------- Post added at 12:00 PM ---------- Previous post was at 11:51 AM ----------
hi everyone
i need help i tried to upgrade my Tab GT-N8010 through Kies after download the file it stuck on downloading and do not turn off target.
i tried hard reset as per procedure but reboot again.
please advise me what i can it.

cant download at samobile
dannche said:
Thanks. With the new Stock ROM, the problem was resolved.
Click to expand...
Click to collapse
i try download stok rom at samobile,but i cant download..

9208DX , odin fails on cm.bin
i am having the same problem, ODIN fails after cm.bin,
tried with new rom from sammobile - still the same, tried with odin 3.10.7 and 3.10.6
nothing, any ideas?

n9208TW and n9208SMA are different. you can not flash firmware of TW to SMA. download correct one
Sent from my SM-N9208 using Tapatalk

Hey you can try tsar300 to download Samsung original stock rom http://www.tsar3000.com/Joomla/index.php?option=com_content&view=category&id=55&Itemid=82
---------- Post added at 07:15 PM ---------- Previous post was at 07:12 PM ----------
Just tap thanks if I help

waheem said:
Hey you can try tsar300 to download Samsung original stock rom http://www.tsar3000.com/Joomla/index.php?option=com_content&view=category&id=55&Itemid=82
---------- Post added at 07:15 PM ---------- Previous post was at 07:12 PM ----------
Just tap thanks if I help
Click to expand...
Click to collapse
Sadly, there's no PIT file for N9208. I need it too :crying: :crying: :crying:

A bad pit can bricked your phone you can create your own pit show this http://forum.xda-developers.com/showthread.php?t=1916936

Use KIES3,
select."Firmware Upgrade and Initialisation"
Follow instraction and Plug your phone (Downloading mode). Now your PC should install driver.
After driver installed, turn off Kies3. And now use Odin to flash N9208, the problem of FAIL should solved.
I solved my problem with others Asia product code ~

Hello there
NOTE 5 DUOS my device SM N9208 CSC Malaysia
ASIA my device
I want to install ROMs for this device EUROPE ROM ... EUROPE MODEL SM N920CD
I've tried it, but gave error
maybe I could not
or
Which model SM N ???? Need to install
FOR EUROPE
which supports
Which ROM ???
to take a different ROM
Do I need to change the CSC code?
these devices do not support a different ROM?
or this process
Do I need to root?
Do you have the same problem living
briefly
Do you have finished this problem?
what should I do ?
Does anyone have information?
Could you please help me ?

I had this problem with the Note 5 SM-N920T when i was trying to unroot the phone, whatever version of odin or firmware I use it keep failing.
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1101)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> cm.bin
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Until I use the Smart Switch-->device installation--> I put my model number and serial and I was able to unroot and install the latest firmware without any issues . hope this help for those who need it.

xganonx said:
I had this problem with the Note 5 SM-N920T when i was trying to unroot the phone, whatever version of odin or firmware I use it keep failing.
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1101)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> cm.bin
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Until I use the Smart Switch-->device installation--> I put my model number and serial and I was able to unroot and install the latest firmware without any issues . hope this help for those who need it.
Click to expand...
Click to collapse
there is no option in smart switch called device installation can u post a screenshot please.

Im brick my phone Please help (Nand write fail )

Hi
I tried flash by ODIN my G900A and now have nan write fail.
I suggested to this site kwentology.com/2015/09/Samsung-G900A-with-Asian-Laguage-Packs.html
I fail on first step, put to ODIN AP CP and CSC, immediately i got fail nan write.
Last my firmware is
Model: SM-G900A
Android 5.1.1
Baseband version: G900AUCU4CPA1
Build number: LMY47X.G900AUCU4CPA1
I found 4 files + PIT files rescue for this model but still fail ;/
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed
I used different version ODIN mainly 3.10.7
My rescue file is:
AP_G900AUCU2AND3_964333_REV00_user_low_ship_MULTI_CERT.tar.md5
BL_G900AUCU2AND3_964333_REV00_user_low_ship_MULTI_CERT.tar.md5
CP_G900AUCU2AND3_964333_REV00_user_low_ship_MULTI_CERT.tar.md5
CSC_ATT_G900AATT2AND3_964333_REV00_user_low_ship_MULTI_CERT.tar.md5
KLTE_USA_ATT.pit
I also flash this single firmware G900AUCU1ANCE_G900AATT1ANCE_G900AUCU1ANCE_HOME.tar.md5
and still fail on odin
Can you friends help me ? Or this phone now is brick and suitable for trash ?
I call tomorrow to local services mayby can help

You can't flash back to 4.4.2. Find PA1 file and Odin back to 5.1.
Sent from my SAMSUNG-SM-G870A using XDA-Developers mobile app

Sgt.CM said:
You can't flash back to 4.4.2. Find PA1 file and Odin back to 5.1.
Sent from my SAMSUNG-SM-G870A using XDA-Developers mobile app
Click to expand...
Click to collapse
Can you explain what you mean PA1 file ?
You mean 5.1.1 stock firmware ? I looking but probably only is 4.2.2 firmware available

Yes. Search the forum for the PA1.tar or Try this: http://forum.xda-developers.com/showthread.php?t=3305497
Sent from my SAMSUNG-SM-G870A using XDA-Developers mobile app

I use this firmware 5.1.1 and now phone works !!!
Thank you to directing me about fllashing the same number android before i have.
link:
https://mega.nz/#!klV0WZhY!crcwGKJBP...aXEiJOAnAJHH5c
Pass:mymovilar

Hi
I try to root the phone and now is just looping on the recovery mode. Downloaded the stock rom and apply using odin and NOTHING! I just got this phone and I am worried is junk now.
This is the message from odin
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G870AUCU1ANE4_G870AATT1ANE4_G870AUCU1ANE4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
PLEASE HELP!!!

G900AUCU4CPA1 Help
Guys help find the firmware on the phone s5 (G900AUCU4CPA1) for Odin.
The phone hangs when you turn on the Samsung logo

Help restoring to stock | Odin wont work

Hello! So Im selling my tab s2 but I need it to be returned to stock to do so. Only part is odin fails on EVERY firmware I put through it and smart switch and Kies try to update but dont recognize while in bootloader mode. Below is the error Im getting. Ive tried pulling the PIT and flashing but no luck. Ive tried changing the port on my pc too but no luck.
Im on a T710 with a 5.1.1 rom installed. Any help would be much apreciated!
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> boot.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On the tablet I get "check fail device 2 binary 1" in red below everything in the top right.

I think that means you're flashing firmware that is below bootloader version. I had it happen. There is a 1B and 2B for bootloader version like on here
https://samsung-firmware.org/model/SM-T810/region/XAR/
I went in stupid mode and got it to flash ignoring that error and it darn near didn't boot at all. Nothing worked for me even 2B versions until I flash a good backup in recovery then odin went fine without that red error.

You're flashing the wrong firmware. You're trying to flash a revision 1 firmware on a device running revision 2 firmware.
You need an XXU2 firmware.

ashyx said:
You're flashing the wrong firmware. You're trying to flash a revision 1 firmware on a device running revision 2 firmware.
You need an XXU2 firmware.
Click to expand...
Click to collapse
Thanks! Im downloading T710XXU2CPH1 6.0.1 from sammobile but its downloading at 300 kb/s :crying: should I do this or flash the 5.1.1 revision 2 for anyone who wants root?

Sugardaddy_duncan said:
Thanks! Im downloading T710XXU2CPH1 6.0.1 from sammobile but its downloading at 300 kb/s :crying: should I do this or flash the 5.1.1 revision 2 for anyone who wants root?
Click to expand...
Click to collapse
Download it from UPDATO

ashyx said:
Download it from UPDATO
Click to expand...
Click to collapse
I cant thank you enough! Please tell me where you live so I can come hug you!

Sugardaddy_duncan said:
I cant thank you enough! Please tell me where you live so I can come hug you!
Click to expand...
Click to collapse
If you were female maybe lol. [emoji12]