Differences between Sm-t815 and Sm-t815y - Galaxy Tab S2 Q&A, Help & Troubleshooting

Hi guys
I bought a galaxy tab s2 that Is marked sm-t815y. I think it's the asian version of the tablet. Do you think there are hardware differences between 815 and 815y? I'd like to upgrade the firmware to an european version but i don't know if it' supported.
Thank you in advance

Panso76 said:
Hi guys
I bought a galaxy tab s2 that Is marked sm-t815y. I think it's the asian version of the tablet. Do you think there are hardware differences between 815 and 815y? I'd like to upgrade the firmware to an european version but i don't know if it' supported.
Thank you in advance
Click to expand...
Click to collapse
You most likely can. Flash the firmware you want but make sure you have your firmware handy in case it doesn't work.

mmhh... no good news for me... i tried to flash the firmware for sm-t815 but didn't work. then i tried to flash the original firmware (or so i think) and now i can't start the tablet. i can only make it start in download mode.
I controlled before the flash and the data were:
ap: T815YDVU1AOG6
cp: T815YDVU1AOG6
csc: T815YOLB1AOG6
So i flashed the firmware with code T815YDVU1AOG6_T815YOLB1AOG6_T815YDVU1AOG6_HOME.tar taken from sammobile
i thought it was correct but doesn't work.
odin log is:
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Added!!
<ID:0/009> Odin engine v(ID:3.1100)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> SingleDownload.
<ID:0/009> sboot.bin
<ID:0/009> NAND Write Start!!
<ID:0/009> Transmission Complete..
<ID:0/009> Now Writing.. Please wait about 2 minutes
<ID:0/009> Receive Response from boot-loader
<ID:0/009> boot.img
<ID:0/009> Transmission Complete..
<ID:0/009> Now Writing.. Please wait about 2 minutes
<ID:0/009> Receive Response from boot-loader
<ID:0/009> recovery.img
<ID:0/009> Transmission Complete..
<ID:0/009> Now Writing.. Please wait about 2 minutes
<ID:0/009> Receive Response from boot-loader
<ID:0/009> system.img
<ID:0/009> Transmission Complete..
<ID:0/009> Now Writing.. Please wait about 2 minutes
<ID:0/009> Receive Response from boot-loader
<ID:0/009> Transmission Complete..
<ID:0/009> Now Writing.. Please wait about 2 minutes
<ID:0/009> FAIL!
<ID:0/009>
<ID:0/009> Receive Response from boot-loader
<OSM> All threads completed. (succeed 0 / failed 1)
Do you think it's the wrong firmware or something else??
thank you

Panso76 said:
mmhh... no good news for me... i tried to flash the firmware for sm-t815 but didn't work. then i tried to flash the original firmware (or so i think) and now i can't start the tablet. i can only make it start in download mode.
Click to expand...
Click to collapse
See there : http://androidcustomrom1.blogspot.fr/2015/08/samsung-galaxy-tab-s2-97-sm-t815y.html
BTW, this link coming for Singapore 815Y and At&T sold this model too. And the bootloader is locked for AT&T and Verizon one... May be it's your case.

So i could solve flashing a Verizon firmware?

Panso76 said:
So i could solve flashing a Verizon firmware?
Click to expand...
Click to collapse
Verizon coming with 5.1.1. Tell us more about your device (country, provider...).

Panso76 said:
mmhh... no good news for me... i tried to flash the firmware for sm-t815 but didn't work. then i tried to flash the original firmware (or so i think) and now i can't start the tablet. i can only make it start in download mode.
I controlled before the flash and the data were:
ap: T815YDVU1AOG6
cp: T815YDVU1AOG6
csc: T815YOLB1AOG6
So i flashed the firmware with code T815YDVU1AOG6_T815YOLB1AOG6_T815YDVU1AOG6_HOME.tar taken from sammobile
i thought it was correct but doesn't work.
odin log is:
Enter CS for MD5..
Binary Check MD5.. Do not unplug the cable..
Please wait..
Checking MD5 finished Sucessfully..
Leave CS..
Added!!
Odin engine v(ID:3.1100)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
SingleDownload.
sboot.bin
NAND Write Start!!
Transmission Complete..
Now Writing.. Please wait about 2 minutes
Receive Response from boot-loader
boot.img
Transmission Complete..
Now Writing.. Please wait about 2 minutes
Receive Response from boot-loader
recovery.img
Transmission Complete..
Now Writing.. Please wait about 2 minutes
Receive Response from boot-loader
system.img
Transmission Complete..
Now Writing.. Please wait about 2 minutes
Receive Response from boot-loader
Transmission Complete..
Now Writing.. Please wait about 2 minutes
FAIL!
Receive Response from boot-loader
All threads completed. (succeed 0 / failed 1)
Do you think it's the wrong firmware or something else??
thank you
Click to expand...
Click to collapse
Are you loading the firmware tar into the AP slot and which version of odin are you using?
From the output it seems bootloader, boot and recovery flash successfully, but the system.img fails.
Usually because the image has the wrong signature and is not intended for your device.
This begs the question: Why didn't you make a full backup BEFORE flashing anything?
This one thing could have saved you a massive headache.

I solved downloading another firmware version. Thank you to everybody helped me. At the end i can confirm that t815 firmwares are not compatibles with t815y

Panso76 said:
I solved downloading another firmware version. Thank you to everybody helped me. At the end i can confirm that t815 firmwares are not compatibles with t815y
Click to expand...
Click to collapse
Great! Which version did you use? May be it will help someone else...

The one in your post

Hi is it correct to say the T815Y does not support the UK LTE Band B20, 800mhz ? Does any one know how many models of T815 there are and the frequencies supported.. Eg C supports TTD channels and Y supports a TTD channel....
Thx

Reflashing
Hi,
I will reflash factory Firmware, i have rottet and have custom recovery. I already have download Firmware and odin can somebody explain me please hove to do it i will be greatfull thanks everybody :good:

14ay said:
Hi is it correct to say the T815Y does not support the UK LTE Band B20, 800mhz ? Does any one know how many models of T815 there are and the frequencies supported.. Eg C supports TTD channels and Y supports a TTD channel....
Thx
Click to expand...
Click to collapse
As far as I know you are correct. No B20 on the Y variant. If you want B20 you should get the N variant (which swaps B28 for B20).

Can i flash a T 810 5.1.1. Rom on my T815. I dont need to use LTE or a sim card anyways. Let me know

myphone12345 said:
As far as I know you are correct. No B20 on the Y variant. If you want B20 you should get the N variant (which swaps B28 for B20).
Click to expand...
Click to collapse
Any luck on confirming this?

Also the Y version has UMTS 3G AWS band 4 (1700/2100) whereby the others dont.

Related

Rooted Firmware G800FXXU1ANG6_SER

Hi guys! We have GREAT NEWS!!! We GOT ROOT for S5mini SM-G800F LTE
Big thanks for PPKa from Russian forum "4pda" - he is made for us firmware with preinstalled root. it is work on my S5mini. You can download it here
Please remember, after Rooting you lose official warranty
G800FXXU1ANG6_SER_ROOT_NO_KNOX.tar.md5
Try towel Root maybe its help u
Sent from my SM-G900F using XDA Premium 4 mobile app
thereassaad said:
Try towel Root maybe its help u
Sent from my SM-G900F using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thnks mate, i tried TowelRoot and Kingo ROOT - its dont work for S5mini
---
confirm
Can anybody confirm this root Image, I'm waiting to buy the S5 mini unti I know for sure it can be rooted.
flexmeister said:
Can anybody confirm this root Image, I'm waiting to buy the S5 mini unti I know for sure it can be rooted.
Click to expand...
Click to collapse
Welcome..
I will surely not install a russian 4.4.2 root image where I understand no language, have no clear description and no confirmation on my brand new s5 mini, sry..
This firmware have a lot of langueges inclusive deutsch
Winstrol said:
This firmware have a lot of langueges inclusive deutsch
Click to expand...
Click to collapse
Hey Guys, can you please help out with the SM-G800H version. All firmware versions at Sammobile fail at system.img.ext4?
moamh1 said:
Hey Guys, can you please help out with the SM-G800H version. All firmware versions at Sammobile fail at system.img.ext4?
Click to expand...
Click to collapse
Rooted firmware G800HXXU1ANGD_SER for SM-G800H duos for Russian region with a lot of languages - version SM-G800H duos you can download here. Attention: It is work perfect for S5mini duos from Russian, but im not tested it with S5mini duos from another regions.
Winstrol said:
Rooted firmware G800HXXU1ANGD_SER for SM-G800H duos for Russian region with a lot of languages - version SM-G800H duos you can download here. Attention: It is work perfect for S5mini duos from Russian, but im not tested it with S5mini duos from another regions.
Click to expand...
Click to collapse
Dear Winstrol, thank you for the link but I keep getting the same error. Odin fails just when it starts "system.img.ext4" . I have tried it on several odin versions 1.3, 3.07, 3.09, on different pcs and using different USB cables :s i have even tried most of the firmwares on sammobile, I always get the same error. Any help in this?
Any idea why this is happening
The following is the log from odin:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G800HXXU1ANGD_SER_ROOT_NO_KNOX.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> aboot.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> sbl1.mbn
<ID:0/007> rpm.mbn
<ID:0/007> tz.mbn
<ID:0/007> sdi.mbn
<ID:0/007> NON-HLOS.bin
<ID:0/007> boot.img
<ID:0/007> recovery.img
<ID:0/007> system.img.ext4
<ID:0/007> FAIL! (Ext4)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I see a lot of people have same problem for s5mini when tried reinstall system.img.ext4, but unfortunately i don't understand why it happen.. It look like probably:
1. device have region lock
2. Samsung released a lot of versions s5mini with different stuffing and every different s5mini have different CRC and when ODIN started install system.img and compare CRC for current device stuffing, see it is different and stop the installing.
My recommendation - write the letter to Samsung support..
Sorry, i have no more ideas

[OFFICIAL] Firmware selection for SM-T700/SM-T800 Variants

Hello my friends! I decided myself to creat a thread with official stock firmwares of our Galaxy Tab S. I don't touch it, all is stock! I'm grabbing this files from www.sammobile.com and than upload it on faster hoster
If it is wished by some users, i can extract the md5.tar files and upload different files (boot.img, system.img etc.)
What's in it:​I will add the latest firmwares provided by Samsung, this means, always latest built date, highest changelog, latest modem, bootloader etc. I will creat different mirrors, I will add www.mega.co.nz I think
All firmwares are without branding! And it don't plays a role, if the firmwares are from Russia, New Zealand or Germany. The only difference between them is the preinstalled language and keyboard language. And that's all. You can easily change it
This will not tripp your Knox warranty!! It's an official update! Knox will stay 0.
Supported devices:​
SM-T700
SM-T705
SM-T800
SM-T805
Instructions:​
Flash it at your own risk, I'm not responsible for any damaged device!
1. Download the needed firmware from below and extract the zip to get the odin files
2. Download latest odin from here!
3. Open Odin, click on AP and add AP file. Same for BL, CP and CSC! Add all 4 files to odin (except wifi versions don't have any modem)
4. Make sure you installed all samsung drivers
5. Shut down your Tab S.
6. Open download mode by holding volume down, home button and power button.
7. Connect it to your PC.
8. LEAVE EVERY THING AS IT IS IN ODIN, OTHERWISE THERE WILL BE A CATASTROPHE (If you select something wrong.)
9. When your tablet is connected, there will shine a bluenbox in odin.
10. Hit start and wait
11. It will reboot and you will get the latest firmware from samsung.
Download Center:​SM-T700:
Latest MM rom for SM-T700
Model SM-T700
Model name GALAXY TabS
Country Chile
Version Android 6.0.1
Changelist 9541789
Build date Tue, 18 Oct 2016 12:17:02 +0000
Security Patch Level 2016-10-01
Product code CHO
PDA T700XXU1CPJ3
CSC T700UVS1CPJ3
SM-T705:
Latest MM rom for SM-T705
Model SM-T705
Model name GALAXY TabS
Country Bulgaria
Version Android 6.0.1
Changelist 8816210
Build date Thu, 13 Oct 2016 03:20:58 +0000
Security Patch Level 2016-10-01
Product code BGL
PDA T705XXU1CPJ4
CSC T705OXX1CPJ1
SM-T800:
Latest MM rom for SM-T800
Model SM-T800
Model name GALAXY Tab S
Country Italy
Version Android 6.0.1
Changelist 8965996
Build date Mon, 31 Oct 2016 10:08:19 +0000
Security Patch Level 2016-11-01
Product code ITV
PDA T800XXU1CPK1
CSC T800ITV1CPI1
SM-T805:
Latest MM rom for SM-T805
Model SM-T805
Model name GALAXY Tab S
Country Italy
Version Android 6.0.1
Changelist 8816210
Build date Fri, 21 Oct 2016 11:03:56 +0000
Security Patch Level 2016-10-01
Product code ITV
PDA T805XXU1CPJ5
CSC T805ITV1CPJ2​
Credits:​Samsung for the firmware
Sammobile.com for the links
mega for their servers xD​
All firmwares are now online
This took me more than 20 hours to upload and download. I'm not mirroring these firmwares to other websites. If it doesn't work, use a proxy such as cybershell.biz or use a vpn
SM-T807T Firmware: https://mega.co.nz/#!ylYEBA4D!yWUPtuT60dLCIy_zCN_rqnN2L319oZYSCSFtOC_Pv6Q
Sprint SMT807P firmware here: https://docs.google.com/file/d/0B5DZenb7A53caXhNQkhMb0NkMFU/edit?usp=docslist_api
DUHAsianSKILLZ said:
If you want you can use my links from my thread. I have the latest builds up for some and even a twrp backup. Thought you might want to use then since your thread are mor organised
---------- Post added at 06:51 PM ---------- Previous post was at 06:51 PM ----------
http://forum.xda-developers.com/showthread.php?t=2934279
Click to expand...
Click to collapse
Thanks, I will wait until my uploads are finished and than upload it myself
LTE versions of both Tablets (SM-T705 and SM-T805) are online!
Tkkg1994 said:
LTE versions of both Tablets (SM-T705 and SM-T805) are online!
Click to expand...
Click to collapse
Glad you have the lte ones! I never got the chance to do them and only did the wifi ones. These take time lol.
DUHAsianSKILLZ said:
Glad you have the lte ones! I never got the chance to do them and only did the wifi ones. These take time lol.
Click to expand...
Click to collapse
I think you got other LTE versions than me, becaus I uploaded the european version and you maybe will upload the US version..:highfive:
Deleted
If I follow the procedure will it be like a dirty flash (I'll mantain all my data/apps/confs) or will I be forced to reinstall everything?
Thanks
dagosjt said:
If I follow the procedure will it be like a dirty flash (I'll mantain all my data/apps/confs) or will I be forced to reinstall everything?
Thanks
Click to expand...
Click to collapse
It will be like a dirty flash. You won't lose any data. Hit thanks bro :highfive:
All firmwares now online! If someone need a special one or another mirror, ask me
Tkkg1994 said:
All firmwares now online! If someone need a special one or another mirror, ask me
Click to expand...
Click to collapse
Your quick! Do you have google fiber or something lol.
DUHAsianSKILLZ said:
Your quick! Do you have google fiber or something lol.
Click to expand...
Click to collapse
No I haven't. I live in Switzerland No google fiber here xD
Got an S5 or an friend how got one? I have the officail update to android 5.0 Lollipop! Thread is hear:
http://forum.xda-developers.com/galaxy-s5/orig-development/official-lollipop-5-0-sm-g900f-t2962141
flash is faile my tab is t700 rooted and twrp
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T700XXU1ANK2_T700XAR1ANJ1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
u9689 said:
flash is faile my tab is t700 rooted and twrp
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T700XXU1ANK2_T700XAR1ANJ1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Try Odin 1.84 or another firmware
u9689 said:
flash is faile my tab is t700 rooted and twrp
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T700XXU1ANK2_T700XAR1ANJ1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Looks like your tablet was disconnected ? And added again?
Try Odin1.85
My odin 3.9. But after flaahsing cf auto root ot work thans any way
I'm really quite new to Samsung tabs, does this firmware include stock software/ROM as well? Looking to get back to stock from custom ROM.
meleelord said:
I'm really quite new to Samsung tabs, does this firmware include stock software/ROM as well? Looking to get back to stock from custom ROM.
Click to expand...
Click to collapse
Yes all these firmwares are stock firmwares for the tab s. Just pick your model, and the right country of your device. Then flash with Odin!

[STOCK][Odin] OFFICIAL T713 STOCK FIRMWARE T713XAR1APD9

Here is the official stock firmware for the New (2016) Galaxy Tab S2 8.0" T713.
Use this to restore your tablet or fix a soft brick.
This requires Odin to flash.
Model Name: Galaxy Tab S2 8.0
Model: SM-T713
Country: Cellular South (XAR)
Firmware Version: T713XXU1APD9
OS: Android Marshmallow
OS Version: 6.0.1
PDA: T713XXU1APD9
CSC: T713XAR1APD9
Download T713XAR1APD9 Here
Hello everybody!
Sorry if this si not fine for me to post in this thread, but I think my question is quite related, in case I apologize in advance.
I recently bought a Galaxy tab S2 8" (SM-T719).
I installed the TWRP and applied SuperSU (as per guide: http://forum.xda-developers.com/tab-s2/development/twrp-3-0-2-1-galaxy-tab-s22016-sm-t713-t3390627)
All fine...
Only later I recall that I stupidly forgot to make a complete STOCK backup. If I need, can I use the STOCK provided in this thread even if it is for T713?
The only difference I see comparing the specs is the additional 2G support.
Thank you in advance and thanks to everybody for the great work!
PS: if it can be usefull to anybody I can make a BACKUP of the current state of the tablet.
Best regards!!
DeeXii said:
Here is the official stock firmware for the New (2016) Galaxy Tab S2 8.0" T713.
Use this to restore your tablet or fix a soft brick.
This requires Odin to flash.
Model Name: Galaxy Tab S2 8.0
Model: SM-T713
Country: Cellular South (XAR)
Firmware Version: T713XXU1APD9
OS: Android Marshmallow
OS Version: 6.0.1
PDA: T713XXU1APD9
CSC: T713XAR1APD9
Download T713XAR1APD9 Here
Click to expand...
Click to collapse
Can we use the firmware for T813 as well?
Or do you know a source where to get that firmware?
Thanks...about to Root and went to SamMobile and another Samsung site to get Stock in case of any problems Rooting....But Its NOWHERE to be found!!! A quick Google search led me here to trusted XDA!!! Thanks Bro!!
I cant believe there is no development for this 713 Tab! I have bought or tried everything Samsung and this is a a great tablet...I had the Tab S 32GB and sold it...never found another..and Note Edge also that had nooo development as well...I guess I get the things that are not popular..2014 Note 10.1 and Note Pro 12.2 there are NO Roms on those either! My Note 5 is the only thing I get to flash...But thanks again...I needed this
Sent from my SM-T713 using XDA-Developers mobile app
DionWhite33 said:
I cant believe there is no development for this 713 Tab!
Click to expand...
Click to collapse
This will change when I get my hands on one Friday
I've just tried to flash this firmware for my SM-713 tab and it does not go past the Samsung logo (fading in/out).
I used Odin 3.10.7 and extracted the file "T713XXU1APD9_T713XAR1APD9_HOME.tar.md5" then pointed the AP field in Odin, to the file and flashed.
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> cache.img.ext4
<ID:0/005> hidden.img.ext4
<ID:0/005> modem.bin
<ID:0/005> adspso.bin
<ID:0/005> aboot.mbn
<ID:0/005> sbl1.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> hyp.mbn
<ID:0/005> NON-HLOS.bin
<ID:0/005> sec.dat
<ID:0/005> cmnlib.mbn
<ID:0/005> keymaster.mbn
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Bhups said:
I've just tried to flash this firmware for my SM-713 tab and it does not go past the Samsung logo (fading in/out).
I used Odin 3.10.7 and extracted the file "T713XXU1APD9_T713XAR1APD9_HOME.tar.md5" then pointed the AP field in Odin, to the file and flashed.
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> cache.img.ext4
<ID:0/005> hidden.img.ext4
<ID:0/005> modem.bin
<ID:0/005> adspso.bin
<ID:0/005> aboot.mbn
<ID:0/005> sbl1.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> hyp.mbn
<ID:0/005> NON-HLOS.bin
<ID:0/005> sec.dat
<ID:0/005> cmnlib.mbn
<ID:0/005> keymaster.mbn
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
Factory reset
Lightn1ng said:
Factory reset
Click to expand...
Click to collapse
Thanks!!!
Factory rest worked great!!
Bhups said:
Thanks!!!
Factory rest worked great!!
Click to expand...
Click to collapse
Awesome!
Lightn1ng said:
This will change when I get my hands on one Friday
Click to expand...
Click to collapse
Are you cooking something up? I cant wait! Im also getting an update from Samsung thats about 285MBs...looks to small to be Firmare.maybe its a Security Patch?
Sent from my SM-T713 using XDA-Developers mobile app
DionWhite33 said:
Are you cooking something up? I cant wait! Im also getting an update from Samsung thats about 285MBs...looks to small to be Firmare.maybe its a Security Patch?
Sent from my SM-T713 using XDA-Developers mobile app
Click to expand...
Click to collapse
Lightning ROM... Its in the dev forums...
There's a newer version for this firmware T713XXU1APG1 (build 01.07.2016, the one in the first post is build 20.04.2016). I'm not sure what the difference is. Has anybody already downloaded the new version and saved it somewhere on the Internet? A free download from https://samsung-firmware.org/model/SM-T713/region/XAR/ takes almost 7 hours.
dxxvi said:
There's a newer version for this firmware T713XXU1APG1 (build 01.07.2016, the one in the first post is build 20.04.2016). I'm not sure what the difference is. Has anybody already downloaded the new version and saved it somewhere on the Internet? A free download from https://samsung-firmware.org/model/SM-T713/region/XAR/ takes almost 7 hours.
Click to expand...
Click to collapse
I've hosted the file on a separate mirror on Mega: https://mega.nz/#!uZ0S2LKJ!cv9_833R1kUVndRl4lpIM_UV51WiCtbVrWAd9S3m2TQ. No file changes, just a download/rehost.
Image restore via Odin fails with blue caution triangle screen
I had my S2 SM-T713 8.0 Rooted and tried to install Lightning. The WiFi failed, so I flashed the WiFi fix. Still no WiFi. Restored the rooted TWRP backup. It booted up to the lock screen, but refused to allow me to use the only pin that had ever been entered on the machine.
After numerous attempts to get around the pin issue, I attempted to flash this stock firmware via Odin. Every attempt failed at a different point. MD5 double checked and matched. The latest attempt ran as follows:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> cache.img.ext4
<ID:0/003> hidden.img.ext4
<ID:0/003> modem.bin
<ID:0/003> adspso.bin
<ID:0/003> aboot.mbn
<ID:0/003> sbl1.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I am stuck at the blue screen saying that An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software. That software reports that my device is not supported. The other thing on the screen is a message that SU REV CHECK FAIL : [aboot]Fused 2 > Binary 1. I also cannot turn off the screen.
I have been rooting and running numerous ROMS on phones and tablets for 6 years. Any hope left?
stock firmware
Sooo, I made the fatal mistake of rooting with out having the back-up stock os...... long story short, now I cant find out which version of the firmware I need. Can i find out what the stock firmware was by my TABLETS' model number??? btw......
SM-T713NZKEXAR is my model and i cant seem to find it anywhere.
please helppp
dirtymikeandtheboyz said:
Sooo, I made the fatal mistake of rooting with out having the back-up stock os...... long story short, now I cant find out which version of the firmware I need. Can i find out what the stock firmware was by my TABLETS' model number??? btw......
SM-T713NZKEXAR is my model and i cant seem to find it anywhere.
please helppp
Click to expand...
Click to collapse
Use the one linked in the OP.
Before you odin twrp or anything else let the tablet update to the latest firmware.
Success after loading the new updated Samsung firmware from link in post by dxxvi.
"I had my S2 SM-T713 8.0 Rooted and tried to install Lightning. The WiFi failed, so I flashed the WiFi fix. Still no WiFi. Restored the rooted TWRP backup. It booted up to the lock screen, but refused to allow me to use the only pin that had ever been entered on the machine."
Finally had success after loading the new updated Samsung firmware from link in post by dxxvi (took almost 20 hours slow load). Confirmed that it does require a factory reboot after hanging at Samsung logo.
The new firmware allows you to choose whether to require a pin after reboot or just accept fingerprint input.
There is a newer version of of the firmware T713XXU2APJ1, release date 05.10.2016
HELPP
Model - sm-t713nzkexar
had a issue with wifi not working when flashing custom rom, long story short... i wanted to go back stock firmware and is the T713XAR1APD9 not the stock firmware for my device?? i tried to flash and it failed, and for some reason i cant attach the screenshot of the log in odin, but after failure while still in "download mode", at the top of screeen tablet says,
"SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1"

Im brick my phone Please help (Nand write fail )

Hi
I tried flash by ODIN my G900A and now have nan write fail.
I suggested to this site kwentology.com/2015/09/Samsung-G900A-with-Asian-Laguage-Packs.html
I fail on first step, put to ODIN AP CP and CSC, immediately i got fail nan write.
Last my firmware is
Model: SM-G900A
Android 5.1.1
Baseband version: G900AUCU4CPA1
Build number: LMY47X.G900AUCU4CPA1
I found 4 files + PIT files rescue for this model but still fail ;/
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed
I used different version ODIN mainly 3.10.7
My rescue file is:
AP_G900AUCU2AND3_964333_REV00_user_low_ship_MULTI_CERT.tar.md5
BL_G900AUCU2AND3_964333_REV00_user_low_ship_MULTI_CERT.tar.md5
CP_G900AUCU2AND3_964333_REV00_user_low_ship_MULTI_CERT.tar.md5
CSC_ATT_G900AATT2AND3_964333_REV00_user_low_ship_MULTI_CERT.tar.md5
KLTE_USA_ATT.pit
I also flash this single firmware G900AUCU1ANCE_G900AATT1ANCE_G900AUCU1ANCE_HOME.tar.md5
and still fail on odin
Can you friends help me ? Or this phone now is brick and suitable for trash ?
I call tomorrow to local services mayby can help
You can't flash back to 4.4.2. Find PA1 file and Odin back to 5.1.
Sent from my SAMSUNG-SM-G870A using XDA-Developers mobile app
Sgt.CM said:
You can't flash back to 4.4.2. Find PA1 file and Odin back to 5.1.
Sent from my SAMSUNG-SM-G870A using XDA-Developers mobile app
Click to expand...
Click to collapse
Can you explain what you mean PA1 file ?
You mean 5.1.1 stock firmware ? I looking but probably only is 4.2.2 firmware available
Yes. Search the forum for the PA1.tar or Try this: http://forum.xda-developers.com/showthread.php?t=3305497
Sent from my SAMSUNG-SM-G870A using XDA-Developers mobile app
I use this firmware 5.1.1 and now phone works !!!
Thank you to directing me about fllashing the same number android before i have.
link:
https://mega.nz/#!klV0WZhY!crcwGKJBP...aXEiJOAnAJHH5c
Pass:mymovilar
Hi
I try to root the phone and now is just looping on the recovery mode. Downloaded the stock rom and apply using odin and NOTHING! I just got this phone and I am worried is junk now.
This is the message from odin
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G870AUCU1ANE4_G870AATT1ANE4_G870AUCU1ANE4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
PLEASE HELP!!!
G900AUCU4CPA1 Help
Guys help find the firmware on the phone s5 (G900AUCU4CPA1) for Odin.
The phone hangs when you turn on the Samsung logo

Help restoring to stock | Odin wont work

Hello! So Im selling my tab s2 but I need it to be returned to stock to do so. Only part is odin fails on EVERY firmware I put through it and smart switch and Kies try to update but dont recognize while in bootloader mode. Below is the error Im getting. Ive tried pulling the PIT and flashing but no luck. Ive tried changing the port on my pc too but no luck.
Im on a T710 with a 5.1.1 rom installed. Any help would be much apreciated!
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> boot.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On the tablet I get "check fail device 2 binary 1" in red below everything in the top right.
I think that means you're flashing firmware that is below bootloader version. I had it happen. There is a 1B and 2B for bootloader version like on here
https://samsung-firmware.org/model/SM-T810/region/XAR/
I went in stupid mode and got it to flash ignoring that error and it darn near didn't boot at all. Nothing worked for me even 2B versions until I flash a good backup in recovery then odin went fine without that red error.
You're flashing the wrong firmware. You're trying to flash a revision 1 firmware on a device running revision 2 firmware.
You need an XXU2 firmware.
ashyx said:
You're flashing the wrong firmware. You're trying to flash a revision 1 firmware on a device running revision 2 firmware.
You need an XXU2 firmware.
Click to expand...
Click to collapse
Thanks! Im downloading T710XXU2CPH1 6.0.1 from sammobile but its downloading at 300 kb/s :crying: should I do this or flash the 5.1.1 revision 2 for anyone who wants root?
Sugardaddy_duncan said:
Thanks! Im downloading T710XXU2CPH1 6.0.1 from sammobile but its downloading at 300 kb/s :crying: should I do this or flash the 5.1.1 revision 2 for anyone who wants root?
Click to expand...
Click to collapse
Download it from UPDATO
ashyx said:
Download it from UPDATO
Click to expand...
Click to collapse
I cant thank you enough! Please tell me where you live so I can come hug you!
Sugardaddy_duncan said:
I cant thank you enough! Please tell me where you live so I can come hug you!
Click to expand...
Click to collapse
If you were female maybe lol. [emoji12]

Categories

Resources