Hello! So Im selling my tab s2 but I need it to be returned to stock to do so. Only part is odin fails on EVERY firmware I put through it and smart switch and Kies try to update but dont recognize while in bootloader mode. Below is the error Im getting. Ive tried pulling the PIT and flashing but no luck. Ive tried changing the port on my pc too but no luck.
Im on a T710 with a 5.1.1 rom installed. Any help would be much apreciated!
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> boot.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On the tablet I get "check fail device 2 binary 1" in red below everything in the top right.
I think that means you're flashing firmware that is below bootloader version. I had it happen. There is a 1B and 2B for bootloader version like on here
https://samsung-firmware.org/model/SM-T810/region/XAR/
I went in stupid mode and got it to flash ignoring that error and it darn near didn't boot at all. Nothing worked for me even 2B versions until I flash a good backup in recovery then odin went fine without that red error.
You're flashing the wrong firmware. You're trying to flash a revision 1 firmware on a device running revision 2 firmware.
You need an XXU2 firmware.
ashyx said:
You're flashing the wrong firmware. You're trying to flash a revision 1 firmware on a device running revision 2 firmware.
You need an XXU2 firmware.
Click to expand...
Click to collapse
Thanks! Im downloading T710XXU2CPH1 6.0.1 from sammobile but its downloading at 300 kb/s :crying: should I do this or flash the 5.1.1 revision 2 for anyone who wants root?
Sugardaddy_duncan said:
Thanks! Im downloading T710XXU2CPH1 6.0.1 from sammobile but its downloading at 300 kb/s :crying: should I do this or flash the 5.1.1 revision 2 for anyone who wants root?
Click to expand...
Click to collapse
Download it from UPDATO
ashyx said:
Download it from UPDATO
Click to expand...
Click to collapse
I cant thank you enough! Please tell me where you live so I can come hug you!
Sugardaddy_duncan said:
I cant thank you enough! Please tell me where you live so I can come hug you!
Click to expand...
Click to collapse
If you were female maybe lol. [emoji12]
Related
Hi all,
so i read the PSA and all the other info about bricking/ what not to load etc and took the plunge to update my kernel
Using odin, i flash the safe kernel DAFUQ_N7000_05272012.tar and everything went well and rebooted. Well this is where i'm stuck now
Reboots, i get the samsung screen with the yellow triangle now but that's it. nothing after that.
Read abit more and grab this kernel cm9_safe_kernel.tar and flash this. same thing.
I cannot get into recovery but i can get into download mode.
I read a few things about looking at repartitioning but as i didn't do a full wipe nor did a flash any roms, i don't think that is my issue.
Any suggestions?
flash a full GB firmware with ODIN and you should be fine
Once done, Root and use Triangle Away app to reset counter and remove the triangle
denti said:
Hi all,
so i read the PSA and all the other info about bricking/ what not to load etc and took the plunge to update my kernel
Using odin, i flash the safe kernel DAFUQ_N7000_05272012.tar and everything went well and rebooted. Well this is where i'm stuck now
Reboots, i get the samsung screen with the yellow triangle now but that's it. nothing after that.
Read abit more and grab this kernel cm9_safe_kernel.tar and flash this. same thing.
I cannot get into recovery but i can get into download mode.
I read a few things about looking at repartitioning but as i didn't do a full wipe nor did a flash any roms, i don't think that is my issue.
Any suggestions?
Click to expand...
Click to collapse
Try flash gb rom. http://androidadvices.com/update-galaxy-note-n7000-gingerbread-xxlc1-236-firmware/
Moved To Q&A
Please post all questions in the Q&A section
azzledazzle said:
flash a full GB firmware with ODIN and you should be fine
Once done, Root and use Triangle Away app to reset counter and remove the triangle
Click to expand...
Click to collapse
Do this....
thanks for the replies but wee confused...
isnt' DAFUQ_N7000_05272012.tar a GB firmware?
also isn't the CM9_safe_kernel.tar a GM firmware to use?
might you be able to suggest a firmware?
without going into much detail, what's the differences between the DAFUQ, CM9_safe firmware vs the GB firmware?
take care
denti said:
thanks for the replies but wee confused...
isnt' DAFUQ_N7000_05272012.tar a GB firmware?
also isn't the CM9_safe_kernel.tar a GM firmware to use?
might you be able to suggest a firmware?
without going into much detail, what's the differences between the DAFUQ, CM9_safe firmware vs the GB firmware?
take care
Click to expand...
Click to collapse
Flash Full GB STOCK ROM via PC ODIN and start again...
Also sounds a little bit like you were on ICS an have flashed a GB Kernel and rebooted....
denti said:
thanks for the replies but wee confused...
isnt' DAFUQ_N7000_05272012.tar a GB firmware?
also isn't the CM9_safe_kernel.tar a GM firmware to use?
might you be able to suggest a firmware?
without going into much detail, what's the differences between the DAFUQ, CM9_safe firmware vs the GB firmware?
take care
Click to expand...
Click to collapse
Its a kernel only.. Download full GB rom here.
http://forum.xda-developers.com/showthread.php?t=1424997
Sent from my GT-N7000 using XDA Premium App
Ok, so i downloaded N7000XXLC1_N7000OXALC1_N7000XXLB2_HOME.tar.md5 and tried to flash via odin and it failed
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLC1_N7000OXALC1_N7000XXLB2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> factoryfs.img
<ID:0/006> NAND Write Start!!
<ID:0/006> zImage
<ID:0/006> hidden.img
<ID:0/006> modem.bin
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
is the log.
any suggestions? I got firmware DAFUQ_N7000_05272012.tar
thank you
denti said:
Ok, so i downloaded N7000XXLC1_N7000OXALC1_N7000XXLB2_HOME.tar.md5 and tried to flash via odin and it failed
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLC1_N7000OXALC1_N7000XXLB2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> factoryfs.img
<ID:0/006> NAND Write Start!!
<ID:0/006> zImage
<ID:0/006> hidden.img
<ID:0/006> modem.bin
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
is the log.
any suggestions? I got firmware DAFUQ_N7000_05272012.tar
thank you
Click to expand...
Click to collapse
Read this carefully and understand. Is your device 16 gig? If yes. http://nguyenkieuhung1984.blogspot.com/2012/01/how-to-installflash-samsung-galaxy-note_09.html?m=1
Read 3C
azzledazzle said:
flash a full GB firmware with ODIN and you should be fine
Once done, Root and use Triangle Away app to reset counter and remove the triangle
Click to expand...
Click to collapse
Triangle away won't work on GB roms.
Try to reflash CF kernal using PC odin..
Fix it?
Hi
My S6 is in loop reboot after i edit the build.prop... I have the original build.prop on my pc but how to restore it ??? Please help!
master-i said:
Hi
My S6 is in loop reboot after i edit the build.prop... I have the original build.prop on my pc but how to restore it ??? Please help!
Click to expand...
Click to collapse
If you have TWRP installed, you can just ADB the file over. Easy.
If you only rooted and want to preserve your KNOX flag, you need to ODIN back to stock and then re-root. It's not destructive, so it's not nearly as bad as it sounds
I don't have twrp for now but can i Install it on download mode ? I just tried to install it and it stop on Start upload (on odin)
Follow these instructions. Download ODIN from that link too
http://forum.xda-developers.com/tmo...irmware-sm-g920t-firmware-odin-guide-t3077706
Do i lose my data? and where Can I find the [Unified Driver Installer] on step 2?
No you won't lose your data at all, you will lose root, but all you need to do is re-root the phone.
http://developer.samsung.com/technical-doc/view.do?v=T000000117
I think it's easier to flash only the build.prop no? is it possible?
Thanx to help me bro!
No at this point, IMO, this is the easiest way to get you back to where you were. I assume you're on the stock ROM just rooted.
Yes, I were on the stock room just rooted by PingPong. Hope it will not make my phone slower or make it crash more often... :/
Yeah just ODIN back to stock, then re-root using PingPong, it's really not as bad as it sounds. All of your apps and user data including all settings will still be there.
@se1000
Please look this:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920TUVU1AOCG_G920TTMB1AOCG_G920TUVU1AOCG_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Have you had your phone in download mode for a while? If so, try rebooting the phone
se1000 said:
Have you had your phone in download mode for a while? If so, try rebooting the phone
Click to expand...
Click to collapse
Of course I just retried again same error... I can't understand because I see the 0:COM3 on Odin...
Are you using the ODIN from the link? I had problems with other versions
se1000 said:
Are you using the ODIN from the link? I had problems with other versions
Click to expand...
Click to collapse
Yes the V3.10
Were you trying to run ADB earlier? Try rebooting the PC
I closed and reopen Ondin on Administrator and now it's blocked with: <ID:0/003> SetupConnection..
Try a different USB cable or different USB port. Seems ODIN can get a bit finicky
I rebooted PC and my Phone and unplugged and still the same
maybe it's because i tried to install twrp?
Shouldn't matter, as long as you're in download mode and ODIN shows light blue it should work
So I have messed up somewhere along the way. I have a T-Mobile sm-t817t. Tablet only boots to "an error has occurred while updating the device software". I cannot get my odin v3 10.7 to see the Tab_S2_t817T_boot.zip file. So I tried to flash the Permissive Lollipop 5.1.1, t810_5.1.1_boot. Now tablet only boots to error. I can get into download mode. I tried to flash the [RECOVERY] TWRP 2.8.7.x Lollipop 5.0.2/5.1.1 - SMT810/T710 but write always fails. Error on tablet is "Custom Binary blocked by FRP". Is there anyway to recover from this? I have not tripped knox as far as I can tell, it's still at 0.
Well first of you tried to flash a zip in Odin which is impossible it needs to be flashed with twrp then you flashed a t810 kernel on a t817 device.
You need to download and flash the stock t817 firmware then disable frp lock aka OEM unlock in settings.
Thanks for the reply, I tried to flash TMB-T817TUVU1AOG8-20151020225336 but now get a new error "sw rev. check fail device 2 binary 1". Am I trying to flash the wrong file or something?
instanoodle said:
Thanks for the reply, I tried to flash TMB-T817TUVU1AOG8-20151020225336 but now get a new error "sw rev. check fail device 2 binary 1". Am I trying to flash the wrong file or something?
Click to expand...
Click to collapse
Where do you see this error odin or the device?
Have you extracted the md5 from the zip and loaded into the AP slot?
Does it pass the md5 hash check?
The error is on the device, "sw rev. check fail device 2 binary 1"
Tar file extracted and mounted in Odin normally.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> boot.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Try flashing the OJ3 firmware, downgrade may be blocked.
ashyx said:
Try flashing the OJ3 firmware, downgrade may be blocked.
Click to expand...
Click to collapse
Where is that OJ3 Firmware?
I have the same problem.
mrch0x said:
Where is that OJ3 Firmware?
I have the same problem.
Click to expand...
Click to collapse
SamMobile
ashyx said:
SamMobile
Click to expand...
Click to collapse
I see OH7 and OJ4 but no sign of OJ3...
Sent from my SM-T710 using Tapatalk
mrch0x said:
I see OH7 and OJ4 but no sign of OJ3...
Sent from my SM-T710 using Tapatalk
Click to expand...
Click to collapse
It's there. Just download oj4
Ok guys, so I flashed 5.1.1 on my phone but I lost root. So I decided to root using the Skipsoft Toolkit. I think it tried to install a bootloader (pretty sure it did). Before this I tried to use the chainfire root but didnt work. ok So then the phone started boot-looping and I decided to flash 4.4.4 back on. But now Odin keeps giving me this error
Code:
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin engine v(ID:3.1100)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> aboot.mbn
<ID:0/008> NAND Write Start!!
<ID:0/008> sbl1.mbn
<ID:0/008> rpm.mbn
<ID:0/008> FAIL! (Auth)
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/008> Removed!!
On the phone side the error I'm getting is this:
Code:
UDC START
SW REV CHECK FAIL : [ABOOT]Fused 2 > Binary 1
[1] eMMC write fail: ABOOT
Idk what to do at this point. I'm assuming I have to flash the boot-loader right?
If I could get some advice, so I don't brick my phone further.
Please please please, help! v__v
If you mean latest 5.1.1 you most likely have updated Samsung kernel security that won't let you downgrade bootloader, you need to flash current stock firmware to recover your device.
Pp.
PanchoPlanet said:
If you mean latest 5.1.1 you most likely have updated Samsung kernel security that won't let you downgrade bootloader, you need to flash current stock firmware to recover your device.
Pp.
Click to expand...
Click to collapse
I tried flashing 5.1.1 But to no avail. Anything else I could do?
I had a similar problem with my note 3. What in did was I backed up my sd card and wiped it, redownloaded stock bootloader and firmwares, and used a different usb cable and port . Then odin worked like charm
My friend ended up putting 4.4.4 on it somehow. Maybe it was just an issue with my computer? Thank you guys for your suggestions btw. I tried all of them.
ChameleonQS said:
My friend ended up putting 4.4.4 on it somehow. Maybe it was just an issue with my computer? Thank you guys for your suggestions btw. I tried all of them.
Click to expand...
Click to collapse
Do you happen to have the link to the 4.4 build? I'm trying to downgrade from 5.1.1 as well
For the past couple of days I've been unable to unroot my device using Odin, which I have done many of times on the past. I went to Sammobile and got the latest firmware to flash back to stock, but everytime I attempt to do so the process Fails. USB Debugging is enabled so I don't have a clue what the problem could be. I will list some general information as well as the results of the Odin process below:
Baseband Version: N910TUVUD0K2
Odin process result:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910T3UVU1DOK2_N910T3TMB1DOK2_N910T3UVU1DOK2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks
Updated: I've stumbled across a thread here on XDA which has a mirror link to Stock TW Firmware/Bootloader/Modem N910TUVU2DOK2, and after flashing this mirror link using Odin... my phone now is unrooted and back to stock. Many thanks to ShrekOpher for posting the mirror link and here is a link to his post: http://forum.xda-developers.com/note-4-tmobile/development/mirror-stock-tw-t3260858
Same issue
I just posted about this same issue a couple of days ago, if you go to my only post ive done so far you can see how we are in the same boat. What were you using before you got to your problem, which custom ROM?
I had this problem on the note edge. What helped me was flashing cwm recovery and wiping everything
Trebor313 said:
For the past couple of days I've been unable to unroot my device using Odin, which I have done many of times on the past. I went to Sammobile and got the latest firmware to flash back to stock, but everytime I attempt to do so the process Fails. USB Debugging is enabled so I don't have a clue what the problem could be. I will list some general information as well as the results of the Odin process below:
Baseband Version: N910TUVUD0K2
Odin process result:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910T3UVU1DOK2_N910T3TMB1DOK2_N910T3UVU1DOK2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks
Click to expand...
Click to collapse
make sure u didn't check in settings the reactivation lock,
use twrp, wipe everything except sdcard... then boot into downloader mode, and it should work, I do know the reactivation lock should be the only thing to stop you.
hope that helps...
Catfish197621 said:
I just posted about this same issue a couple of days ago, if you go to my only post ive done so far you can see how we are in the same boat. What were you using before you got to your problem, which custom ROM?
Click to expand...
Click to collapse
I'm currently using [DOK2] TEKXodus HYBRID N4 URv7
mdiaz33685 said:
make sure u didn't check in settings the reactivation lock,
use twrp, wipe everything except sdcard... then boot into downloader mode, and it should work, I do know the reactivation lock should be the only thing to stop you.
hope that helps...
Click to expand...
Click to collapse
I check and made sure that the reactivation lock was disabled, but it still didn't work. I guess I will keep an eye open to see if this issue can get resolved sometime in the near future
mdiaz33685 said:
make sure u didn't check in settings the reactivation lock,
use twrp, wipe everything except sdcard... then boot into downloader mode, and it should work, I do know the reactivation lock should be the only thing to stop you.
hope that helps...
Click to expand...
Click to collapse
What are the odin settings for doing this install? I can't get it to recognize the file
Nevermind, quick google showed i should extract the file which im not used to doing for roms and use "AP"
waywardfrantz said:
What are the odin settings for doing this install? I can't get it to recognize the file
Nevermind, quick google showed i should extract the file which im not used to doing for roms and use "AP"
Click to expand...
Click to collapse
U have to unziip the firmware and in Odin u need to goto AP and point to the firmware... sometimes i have to remove the extention .md5 after u unzip the firmware depending on which Odin u use...
make sure u have the samsung drivers installed..
mdiaz33685 said:
U have to unziip the firmware and in Odin u need to goto AP and point to the firmware... sometimes i have to remove the extention .md5 after u unzip the firmware depending on which Odin u use...
make sure u have the samsung drivers installed..
Click to expand...
Click to collapse
I can't Odin to stock unless I change the name of the firmware file to .tar. it skips the md5 check I believe.
---------- Post added at 06:17 PM ---------- Previous post was at 06:14 PM ----------
Also go to supersu and do a full unroot before. I'm thinking maybe the supersu backup script could cause issues too