Ok guys, so I flashed 5.1.1 on my phone but I lost root. So I decided to root using the Skipsoft Toolkit. I think it tried to install a bootloader (pretty sure it did). Before this I tried to use the chainfire root but didnt work. ok So then the phone started boot-looping and I decided to flash 4.4.4 back on. But now Odin keeps giving me this error
Code:
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin engine v(ID:3.1100)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> aboot.mbn
<ID:0/008> NAND Write Start!!
<ID:0/008> sbl1.mbn
<ID:0/008> rpm.mbn
<ID:0/008> FAIL! (Auth)
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/008> Removed!!
On the phone side the error I'm getting is this:
Code:
UDC START
SW REV CHECK FAIL : [ABOOT]Fused 2 > Binary 1
[1] eMMC write fail: ABOOT
Idk what to do at this point. I'm assuming I have to flash the boot-loader right?
If I could get some advice, so I don't brick my phone further.
Please please please, help! v__v
If you mean latest 5.1.1 you most likely have updated Samsung kernel security that won't let you downgrade bootloader, you need to flash current stock firmware to recover your device.
Pp.
PanchoPlanet said:
If you mean latest 5.1.1 you most likely have updated Samsung kernel security that won't let you downgrade bootloader, you need to flash current stock firmware to recover your device.
Pp.
Click to expand...
Click to collapse
I tried flashing 5.1.1 But to no avail. Anything else I could do?
I had a similar problem with my note 3. What in did was I backed up my sd card and wiped it, redownloaded stock bootloader and firmwares, and used a different usb cable and port . Then odin worked like charm
My friend ended up putting 4.4.4 on it somehow. Maybe it was just an issue with my computer? Thank you guys for your suggestions btw. I tried all of them.
ChameleonQS said:
My friend ended up putting 4.4.4 on it somehow. Maybe it was just an issue with my computer? Thank you guys for your suggestions btw. I tried all of them.
Click to expand...
Click to collapse
Do you happen to have the link to the 4.4 build? I'm trying to downgrade from 5.1.1 as well
Related
Hello XDA,
I think I messed up my phone pretty bad. Firstly, I tried putting in CWM kernel, my device was at 2.2.? that time and it was a 2.3 kernel. Device wouldnt boot, tried installing some 2.2 kernels but that simply didn't work (with Heimdall).
I tried installing I9000XWJVH_ODKJV3_XXJVO with Odin. It managed to get to the Galaxy S video but not any futher. And this is where it starts to get strange; I ticked "Phone Bootloader update" and "Phone ESF clear" and right now it has a black screen... but all the sound is working, and I still can get into download mode.
Ive tried most things, but without succes. Does any of you have an idea?
edit: so after 10 minutes of pretending to be dead, it resurrected. I tried rebooting (the fw was 2.3.3 and kernal was something rooted) to install CWM but now it wont respond anymore?
If you can access Download mode with 3-buttons combo you can odin-flash a stock rom (JVT for example), reboot and flash a custom kernel to have root and CWM recovery.
http://forum.xda-developers.com/showthread.php?t=1134975
cabessius said:
If you can access Download mode with 3-buttons combo you can odin-flash a stock rom (JVT for example), reboot and flash a custom kernel to have root and CWM recovery.
Click to expand...
Click to collapse
Problem is that I cant acces the CWM. Well, atleast I can't see it. I tried flashing CWM on it, Heimdall said it went OK. When I boot, I get a black screen, hear the boot music and see the touchbuttons lit up. The only thing that wont respond is the screen, I can only to get it to work when I check my pit using Heimdall fronted and let that program reboot my device.
OK, the result:
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9000XXJVR_CL425308_REV03_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9000XXJVR_REV_00_CL1044379.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> boot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> Sbl.bin
<ID:0/008> param.lfs
<ID:0/008> factoryfs.rfs
<ID:0/008> dbdata.rfs
<ID:0/008> cache.rfs
<ID:0/008> zImage
<ID:0/008> modem.bin
<ID:0/008> Transmission Complete..
<ID:0/008> Now Writing.. Please wait about 2 minutes
<ID:0/008>
<ID:0/008> Receive Response form LOKE
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/008> Removed!!
Does anyone have a clue?
Still noone has a clue?
Do like above poster said and try to access download mode, done by either volume down, home, power, all together or by using a jig if that doesnt work. Even if you screen is not displaying anything hook it up to odin and see if odin detects it. Youll know if it does because a com port will turn yellow. If it does flash back to stock and repartition with 512pit.
Hello people.
This started couble of weeks ago when my phone suddendly went to factory mode. it wasent rooted and i was running 4.3 so i took it to the repair center. They told me that the phones circuit board needed to be replaced and it would cost 281€. Since the same phone new was only 299€ i declined their repair. then i went on a search for way to repair the phone my self. I wound some ways but they needed a root acces. So i tried to downgrade my phone back to 4.1.2 but for some reason Odin started to give me this error...
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9305XXBMI3_I9305NEEBMH1_I9305XXBMH3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> tz.img
<ID:0/003> NAND Write Start!!
<ID:0/003> sboot.bin
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
And then when i restarted my phone it keeps giving me yet another error saying that "Firmware upgrade encountered an issue. please select recovery mode in Kies & try again. In kies the phone wont connect to it. it just keeps loading. Now im asking for some help if some1 has an idea or a way to fix this.
I can give more info if needed.
it fails cause you are trying to flash 4.1.2...once you got 4.3 you can't go back...i'm guessing that you get that error when it tries to install the old bootloader(without knox counter)....
spiderman07 said:
it fails cause you are trying to flash 4.1.2...once you got 4.3 you can't go back...i'm guessing that you get that error when it tries to install the old bootloader(without knox counter)....
Click to expand...
Click to collapse
yeah i figured that out. tryed to follow a guide but it dident work... but flashed to 4.3 and that worked and auto rooted my phone and factory mode gone and everything is back to normal
So somehow I've managed to delete my OS on my note 5 model N9208. I've downloaded the correct firmware (i think) from sammob but when I try and flash it with Odin, Odin just crashes. I have tried putting the ROM onto a USB to MicroUSB but TWRP isn't picking up the stick.
Help please :crying:
EDIT:
Odin just come back with this
<ID:0/005> Removed!!
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> cm.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can anybody help me please? Or just tell me if I am downloading the right ROM?
Download Samsung Smart Switch and use it. It will work and there will be no guessing which firmware you need.
CodeNameRedNeck said:
Download Samsung Smart Switch and use it. It will work and there will be no guessing which firmware you need.
Click to expand...
Click to collapse
Smart switch doesn't recognise my device, my phone doesn't get past the screen where it states it's a Note 5.
Just adb sideloaded Nameless custom rom and I've managed to get it to go to the Samsung splashscreen but won't go any further. Not sure on what to do now.
Managed to get it sorted by sideloading a custom ROM with TWRP and left it on the Samsung splashscreen for a bit. To say I only got my first ever android phone on Tuesday I am proud of myself!
/thread.
inxy said:
Managed to get it sorted by sideloading a custom ROM with TWRP and left it on the Samsung splashscreen for a bit. To say I only got my first ever android phone on Tuesday I am proud of myself!
/thread.
Click to expand...
Click to collapse
Dear Sir.
You Should Be Proud.
I am In The Same Boat As Your's.
Kindly Provide Me With PIT File.
I will be grateful.
And Have You Succeeded In Getting ODIN to Flash?
Regards
Its not a PIT File. He sideloaded a ZIP through TWRP.
fkofilee said:
Its not a PIT File. He sideloaded a ZIP through TWRP.
Click to expand...
Click to collapse
I Know That
But I want a PIT file
If He can help Me with That I will be gRateful
Hello, i am new in flashing. My note 5 give me that error when i tried to power Error Custom Binary Blocked By FRP. In odin show me that error <ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cm.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I cant flash. And the screen show me sw rev check fail device 3 binary 2
What i can do?
Sorry for my bad english
You have to flash back to stock firmware cause you might have toggle the OEM locked on developer option. To flash custom firmware you need to switch on your OEM unlocking under developer options in settings
I cant acces to oem. The phone dont start. Another method to revive?
GsKill said:
I cant acces to oem. The phone dont start. Another method to revive?
Click to expand...
Click to collapse
Try to connect your phone in download mode to Samsung smart switch and from there update through emergency recovery software update..Before that download smart switch for Windows and your device Samsung usb drivers..Search for how to use smart switch for emergency recovery..You will need serial number and model number which is printed on backside of phone..Provide which info smart switch will ask and follow process carefully
Download latest firmware version and try again with odin
Thanks all for the sopport. With the latest firm it work. ??
Can you share me the latest firmware. i am not able to download from SAMMobile.
it would be helpful if you share it in some site like mega/megaupload etc
GsKill said:
Thanks all for the sopport. With the latest firm it work.
Click to expand...
Click to collapse
Hey devs,
I'm using a5-2016 (sm-a510fd) with nougat. Today I've tried to downgrade to marshmallow because many Xposed modules I was using isn't working in nougat firmware. But one error which is troubling me a lot and I haven't encountered something like this for a while.
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> cm.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
After this i've installed TWRP recovery and wiped system+data+cache+dalvik+internal , formatted data too but bad luck i keep on getting this error and my mobile is just dead for now. i've tried different usb ports and different usb cables repeating same process all over again. Same process all over and no luck so far. I require a lot of modules and customizations to survive because i'm legally blind and only Xposed help me make my life easier with my mobile. Waiting for help.
yadu123 said:
Hey devs,
I'm using a5-2016 (sm-a510fd) with nougat. Today I've tried to downgrade to marshmallow because many Xposed modules I was using isn't working in nougat firmware. But one error which is troubling me a lot and I haven't encountered something like this for a while.
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> cm.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
After this i've installed TWRP recovery and wiped system+data+cache+dalvik+internal , formatted data too but bad luck i keep on getting this error and my mobile is just dead for now. i've tried different usb ports and different usb cables repeating same process all over again. Same process all over and no luck so far. I require a lot of modules and customizations to survive because i'm legally blind and only Xposed help me make my life easier with my mobile. Waiting for help.
Click to expand...
Click to collapse
Sorry Brother, You can't downgrade using Odin. Because Samsung blocks marshmallow bootloader when you are on Nougat Bootloader. YOU CAN ONLY UPGRADE using Odin. YOU CAN'T DOWNGRADE USING ODIN.
You can't go to Marshmallow stock from Nougat Stock using ODIN. I think u understood the concept. Try flashing a Nougat Firmware. You will not get any error. If u want marshmallow again, then u have to go for CUSTOM ROMs.
Hope this Helped u. Pressing Thanks Button proves that.??
Few months back I have upgraded to nougat and downgraded back to marshmallow without any problem.I was trying something new on my phone that tìme and it just bricked on me . So I flashed a nougat firmware and was using without root for sometime and it doesn't work for me much. Now I have flashed nougat firmware and phone is working and I want marshmallow. In S6 forum I saw someone had same problem and some pit file solved it and I have no idea what they have done.
yadu123 said:
Hey devs,
I'm using a5-2016 (sm-a510fd) with nougat. Today I've tried to downgrade to marshmallow because many Xposed modules I was using isn't working in nougat firmware. But one error which is troubling me a lot and I haven't encountered something like this for a while.
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> cm.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
After this i've installed TWRP recovery and wiped system+data+cache+dalvik+internal , formatted data too but bad luck i keep on getting this error and my mobile is just dead for now. i've tried different usb ports and different usb cables repeating same process all over again. Same process all over and no luck so far. I require a lot of modules and customizations to survive because i'm legally blind and only Xposed help me make my life easier with my mobile. Waiting for help.
Click to expand...
Click to collapse
yadu123 said:
Few months back I have upgraded to nougat and downgraded back to marshmallow without any problem.I was trying something new on my phone that tìme and it just bricked on me . So I flashed a nougat firmware and was using without root for sometime and it doesn't work for me much. Now I have flashed nougat firmware and phone is working and I want marshmallow. In S6 forum I saw someone had same problem and some pit file solved it and I have no idea what they have done.
Click to expand...
Click to collapse
it wont work anymore bro. Just understand. If u want marshmallow... make system dumb using assayed kitchen amd flash.