Root lost after changing kernel - Galaxy S III I9305 (4G LTE + 2GB RAM) Q&A, Help &

Is is normal to loose root on phone if changing kernel?
I am on S3 I9305 LTE installed custom rom with boeffla 5.4 kernel and changed kernel to agni pure stock kernel then suddenly I phone says not rooted no su binary.

Which recovery do you use? Maybe try to root via recovery menu.
Which custom rom did you install?

basvanasperdt said:
Which recovery do you use? Maybe try to root via recovery menu.
Which custom rom did you install?
Click to expand...
Click to collapse
I use cwm the latest version. I tried to root again using zip from ausdim's guide and updated supersu by playstore but it says no su binary.

ihavenoname00 said:
I use cwm the latest version. I tried to root again using zip from ausdim's guide and updated supersu by playstore but it says no su binary.
Click to expand...
Click to collapse
Simply flash this -> http://download.chainfire.eu/supersu
After flashing Boeffla. It seems as I created an issue when porting from i9300 that erases (?) superuser after flashing Boeffla Kernel. Therefore, you may always flash supersu in a flashable zip (link above) and everything is good

Related

CWM version

i flashed to HydraCore_v3.5 and CWM version cannot be used.The titanium backup dont show any backed up apps.When i revert back to CWM version all were in place.Do i need t download the apps again 1 by 1.
pannerch said:
i flashed to HydraCore_v3.5 and CWM version cannot be used.The titanium backup dont show any backed up apps.When i revert back to CWM version all were in place.Do i need t download the apps again 1 by 1.
Click to expand...
Click to collapse
you want to see cwm recovery or what?and if you did backup of your apps and system files before flashing the rom then it should be there.....
shivg86 said:
you want to see cwm recovery or what?and if you did backup of your apps and system files before flashing the rom then it should be there.....
Click to expand...
Click to collapse
i didnt flash the rom,still using the cyanogenmod nightly cm9.I just replaced the kernel." This version of cwm manager should be used with cf-root v5.0 or newer."
pannerch said:
i didnt flash the rom,still using the cyanogenmod nightly cm9.I just replaced the kernel." This version of cwm manager should be used with cf-root v5.0 or newer."
Click to expand...
Click to collapse
Its not the cwm recovery, this message is for the cwm manager installed as app, it comes with cf root kernels. You can still use it but not fully functional. And you still have cwmr flashed by hydracore. Go to recovery mode manually or use this cwm manager to boot in recovery to confirm.
And did you earlier flash cf root kernel on CM rom?
Sent from my GT-N7000
jeetu1981 said:
Its not the cwm recovery, this message is for the cwm manager installed as app, it comes with cf root kernels. You can still use it but not fully functional. And you still have cwmr flashed by hydracore. Go to recovery mode manually or use this cwm manager to boot in recovery to confirm.
And did you earlier flash cf root kernel on CM rom?
Sent from my GT-N7000
Click to expand...
Click to collapse
yes,i flash cf root kernel on CM rom.
deleted
pannerch said:
yes,i flash cf root kernel on CM rom.
Click to expand...
Click to collapse
As far as i know cf root kernels are for tw roms only. Now since you are on hydracore then you should have cwm recovery installed with it, did you check it? Just ignore cwm manager or remove it using titanium.
Sent from my GT-N7000
Rescan the backup folder of your titan backup
via GT-N7000 using XDA-Elite App
If one flash CF root kernel and later update to hydracore, kernel will replace but CWM remains still. Just delete it with titanium/Syst app remover or same other.

[Q]Any way to fix SuperSU?

Hello Guys,
I am using Galaxy note GT-N7000 with [JB][Leak][4.1.1][XXLS2]
So, the first days SuperSU was working and can grant Root Permissions but in 2 weeks later I Update SuperSU via Google Play and when the supersu asks for Update The Binary I click Continue it says Installation Failed! So now, I cannot grand Root Permissions
Please I need help...If u need more information to help just tell me
Thanks.
And a small video what happens:www.youtube.com/supersuproblem
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
H4D_YIANNIS75
Download the Philz kernel for xxls2 (zip file) and flash it from recovery and retest.
Also have you uninstalled and reinstalled supersu from play store.
nokiamodeln91 said:
Download the Philz kernel for xxls2 (zip file) and flash it from recovery and retest.
Also have you uninstalled and reinstalled supersu from play store.
Click to expand...
Click to collapse
Installing the ROM i use SPEEDMOD karnel...
Flashing another karnel will not crash or something like this?
Jb leak what you on now only work with the stock or Philz kernel.
nokiamodeln91 said:
Jb leak what you on now only work with the stock or Philz kernel.
Click to expand...
Click to collapse
Look dude,im dizzy :S
This is the ROM I used www.youtube.com/theromiused
If this is not XXLS2 am sorry just help if u can plesase :/
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
H4D_YIANNIS75
Just flash Philz kernel xxls2 zip version from recovery
Bang. .
Open SuperSU, from settings choose (Reinstall)
Then reinstall SuperSU from play store and it should work fine once you update the binaries
Best of luck
howard bamber said:
I had this. When I tried to update binary said fail. What I did was reinstall busy box and it updated for me
From the man in your attic...
Click to expand...
Click to collapse
Thanks for answering.Is the Ice Cream Sandwich 4.0.3/4.0.4 Superuser Busybox the same as the Jelly bean?
Do I have the same steps to install binary as I do on my ICS 4.0.4?
In ICS I use CWM and then I install SU-busybox.Do I have to do the same?
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Android Juinor BUT Smart member H4D_Yiannis75
Am n00B?Help me:good:Tell when i wrong:highfive:
nokiamodeln91 said:
Jb leak what you on now only work with the stock or Philz kernel.
Click to expand...
Click to collapse
Yes,I am on PhilZ Kernel - Touch XXLS2,No busy box of root :crying:
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Am n00B?Help me:good:Tell when i wrong:highfive:
You have to flash a zip version of philz kernel. It has busybox and su in it. tar version won't do the job
Download superSU from this link http://download.chainfire.eu/298/SuperSU/CWM-SuperSU-v0.99.zip?retrieve_file=1
-Reboot to recovery, flash zip. and reboot..
-open superSU and update binary if needed..
Sent from my GT-N7000
★CM10.1 JB4.2

[Q] Problems after flashed rom

I just flash this rom in my xperia v(http://forum.xda-developers.com/showthread.php?t=2620229)
but I found that I can't get root or go in CWM recovery any more.
anyone know that what should I do to get root or go in CWM recovery
mou2134 said:
I just flash this rom in my xperia v(http://forum.xda-developers.com/showthread.php?t=2620229)
but I found that I can't get root or go in CWM recovery any more.
anyone know that what should I do to get root or go in CWM recovery
Click to expand...
Click to collapse
fastboot a kernel which has cwm.
what I did is after installing the JyROM, I flashed(it is mentioned in the steps if I want to get root) the flashable version of SuperSU v1.91(I just guessed this version of supersu because it is not mentioned in the steps what version to use, hehe, but luckily, it is fine after rebooting).
then I installed again CWM.
hhamzah49 said:
fastboot a kernel which has cwm.
Click to expand...
Click to collapse
thanks
I just fix the problem

[Q] ROM Installation Problem(Installation Aborted, Can't open /sdcard/rom.zip)

I don't get officially Kitkat update until now, so i trying to flash this "Fully Deodexed Stock KitKat ROM v1" by Rajeev
I was in 4.3, so i flash 4.2.2(10.3.1.A.2.67) to gain Root access. Root using DoomLord method(flash 10.3.A.0.423 kernel, gain root & again flash 10.3.1.A.2.67 kernel). Then install XZDualRecovery 2.7.1XX RC by NUT
But when i try to install ROM through PhilZ Touch or CWM recovery i get error message "Installation Aborted, Can't open /sdcard/name_of_rom.zip".
Also i tried with this CWM recovery 6.0.2.8 for locked bootloaders v4 by krabappel2548, same issue on it too.
I am not sure what is the problem, i follow every single instruction while installing CWM recovery/flashing ROM. Can anyone please help me.
arifkpi said:
I don't get officially Kitkat update until now, so i trying to flash this "Fully Deodexed Stock KitKat ROM v1" by Rajeev
I was in 4.3, so i flash 4.2.2(10.3.1.A.2.67) to gain Root access. Root using DoomLord method(flash 10.3.A.0.423 kernel, gain root & again flash 10.3.1.A.2.67 kernel). Then install XZDualRecovery 2.7.1XX RC by NUT
But when i try to install ROM through PhilZ Touch or CWM recovery i get error message "Installation Aborted, Can't open /sdcard/name_of_rom.zip".
Also i tried with this CWM recovery 6.0.2.8 for locked bootloaders v4 by krabappel2548, same issue on it too.
I am not sure what is the problem, i follow every single instruction while installing CWM recovery/flashing ROM. Can anyone please help me.
Click to expand...
Click to collapse
Maybe the download is corrupt? Download and try again
St.Jimmy90 said:
Maybe the download is corrupt? Download and try again
Click to expand...
Click to collapse
I re-download but no luck
arifkpi said:
I re-download but no luck
Click to expand...
Click to collapse
Instead of flashing a zip you can flash the official 4.4.2 ftf(Use flashtool to flash ftf) and root it
FTF link :https://mega.co.nz/#!YZgWXQSA!kdhia8TpqA5d-ZV2OI8fno66AgFDojUWNKzqjeVgy1E
Rooting method link: http://forum.xda-developers.com/xperia-z/development/cwm-based-recovery-6-0-4-5-xperia-z-t2167381
Flashtool link: http://www.flashtool.net/download.php

How to root sony xperia zr c5502

HI im using sony xperia zr c5502, i started this thread cause i cant find anything usefull. im running on latest 4.4.4 .283 version india.
and i did excatly i read on same post someone said flash .230 kernal i did this, then root with towel root, i did and was successfully, then again flash .283 kernal. and it made a superuser app as system app on my phone but it mdoes nothing no rooted acces app ask for its permission and either its not updating im getting error like downloading manifest : fail.
i tried updater fixer from play store still not work and how to flash su zip file for this device , i cant use any recovery software to flash zip cause any ap dont give me permission to flash cause im not rooted yet.
plz help fast.
gaggi786 said:
HI im using sony xperia zr c5502, i started this thread cause i cant find anything usefull. im running on latest 4.4.4 .283 version india.
and i did excatly i read on same post someone said flash .230 kernal i did this, then root with towel root, i did and was successfully, then again flash .283 kernal. and it made a superuser app as system app on my phone but it mdoes nothing no rooted acces app ask for its permission and either its not updating im getting error like downloading manifest : fail.
i tried updater fixer from play store still not work and how to flash su zip file for this device , i cant use any recovery software to flash zip cause any ap dont give me permission to flash cause im not rooted yet.
plz help fast.
Click to expand...
Click to collapse
You couldn't find anything helpful in forums? weird
Use Easy root toolkit or gifroot ( its new and I have not tested it ) . Also, you need to download latest SuperSU from chainfire site and put it on sd card
Flash 230 kernel using flashtool
Root using above mentioned methods.
Install recovery. example, NUT's dual recovery latest 2.8.2. You need to download installer zip and not the flashable zip.
After installing the recovery, check the phone reboots into philz touch recovery.
Chose to install zip and select SuperSU 2.XX zip file. Flash the zip
Reboot the phone and check root access.
Flash 283 kernel using flashtool
easy tool rootkit?
I tried this too but im stuck on deamom started successfully. I tried reinstall and instakl abd fastboot driver. And i cant use any recovery tool it ask for root.
touch recovery
And how to boot into touch recovery. As im using easy root toolkit on. 283 kernal should i have to flask. 230 kernal then easy root toolkit will work? I mean are u sure it wontbstuck on deamon started successfully.? Btw i already habe superuser as my system app i cant uninstall it, but it not updating or giving any app access.
And one more thing my wifi dontbturn on when i flash. 230 kernal ftf file.
gaggi786 said:
And how to boot into touch recovery. As im using easy root toolkit on. 283 kernal should i have to flask. 230 kernal then easy root toolkit will work? I mean are u sure it wontbstuck on deamon started successfully.? Btw i already habe superuser as my system app i cant uninstall it, but it not updating or giving any app access.
And one more thing my wifi dontbturn on when i flash. 230 kernal ftf file.
Click to expand...
Click to collapse
Just follow the steps I mentioned.
You can not directly root 283. You will have to flash 230 kernel.
Then Root > Install recovery > at the end of installation of recovery phone will automatically boot into recovery mode.
Then flash latest SuperSU 2.40 zip from recovery menu.
after that check root access with root checker app. Then flash the 283 kernel
kernel device not supported
K after flash I try to root but it say ur kernel device not supported. Also my wifi not work when I flash. 230 so how to I install recovery.
And when I use one click root toolkit it stuck on season started successfully, and on giefroot deacon started but after few process it say kernel devices not supported.
gaggi786 said:
K after flash I try to root but it say ur kernel device not supported. Also my wifi not work when I flash. 230 so how to I install recovery.
And when I use one click root toolkit it stuck on season started successfully, and on giefroot deacon started but after few process it say kernel devices not supported.
Click to expand...
Click to collapse
May be you are doing something wrong because I have mentioned the steps which I used multiple times.
Check USB debugging is enabled in settings > developer options. and Unknown Sources enabled in settings >security
when easy root tool is started, you will see a prompt on phone. keep eye on that because disappears quickly.
thanx i rooted
Bro, thanx a lot i rooted my phone now, mistake was one click root toolkit or geofroot not work. After flash i root with towelroot and then update super su i didnt do any recovery reboot. Just grant access in flashtool.
Again thanx.

Categories

Resources