Hello, my phone Lumia 920 was bricked and it doesn't boot up or respond to any of the input combinations(Vol up +power ) or ( Vol. down + power) it's just showing a black screen and when I connected it to a windows 7 pc it showed as (QHSUSB_DLOAD) and windows failed to install drivers for it I searched online and I reached the Qualcomm drivers for (QHSUSB_DLOAD) mode and now the device is readable as (Qualcomm HS-USB QDLoader9008) in the Ports(COM & LPT) section in device manager and can't do anything beyond that ... any help on how to recover this state to a normal working one using any method even if on a Linux based system computer? I need real help
please guys help me ... i tried every method on the internet to fix it
I got stuck in S/W mode saying " bootloader state : unlocked " with no progress by any methods " LG flash tool or KDZ or the official LG support tool "
LG flash tool stops after 18 seconds saying download dail
KDZ updater stuck on " 3GQCT : wParam = 2010,IParam = 2010 " with no further progress
I tried all the methods on different PCs with no luck !!
thanks for the help in advance
are you using the original usb cable?
yup
i used the original one ... and i have flashed the device hundreds of times before with official and custom roms ... it was working well then !
check windows device manager (if you're on win) to see if drivers are properly recognized
i reinstalled the drivers many times with no luck .... i also tried on different laptops on windows 8 and 7
I have something like this before, try this:
1 remove batt and reinsert
2 hold volume up then power
this will take you to s/w upload screen then update
3 remove and reinsert batt
4 power up normaly
I guess that the bootloader marked as boot to s/w for update but the procedure trick it as "already" update.
It helped me
still not working
klbterminator said:
I have something like this before, try this:
1 remove batt and reinsert
2 hold volume up then power
this will take you to s/w upload screen then update
3 remove and reinsert batt
4 power up normaly
I guess that the bootloader marked as boot to s/w for update but the procedure trick it as "already" update.
It helped me
Click to expand...
Click to collapse
thanx for the tip my friend but it is still not working .... there is no other mode from the start ... any buttons i press lead to s/w mode no recovery and of course no normal system ... even when charging the mobile there is no logo for charging ... only s/w mode ... i guess it means the bootloader is broken ... any advice or idea would help with that !
I have the same problem. Already tried almost everything with WinXP/Win7 and many cables including original. Also tried to get it fixed by the stuff in mobile phone's service but they were also unable to fix it. I think there is no way to fix it :/
dr_m_fahmy said:
thanx for the tip my friend but it is still not working .... there is no other mode from the start ... any buttons i press lead to s/w mode no recovery and of course no normal system ... even when charging the mobile there is no logo for charging ... only s/w mode ... i guess it means the bootloader is broken ... any advice or idea would help with that !
Click to expand...
Click to collapse
then I recommend you to reflash the phone, try this
Code:
http://www.mediafire.com/download/wu50af8uh99air7/P880-Flashtools.rar
Try this!
dr_m_fahmy said:
please guys help me ... i tried every method on the internet to fix it
I got stuck in S/W mode saying " bootloader state : unlocked " with no progress by any methods " LG flash tool or KDZ or the official LG support tool "
LG flash tool stops after 18 seconds saying download dail
KDZ updater stuck on " 3GQCT : wParam = 2010,IParam = 2010 " with no further progress
I tried all the methods on different PCs with no luck !!
thanks for the help in advance
Click to expand...
Click to collapse
brother, try this method http://forum.xda-developers.com/optimus-4x-hd/general/s-stuck-rescue-ultimate-rescue-guide-t3012444 it worked for me!
plz help me i downloaded rom for my dead x2 and i have one step to run the phon but the usb can not read the dead phone cz it say press volume dawn and power and let power when vibrate and lit the volume down after 5second but usb cable not read the phone i try download nokia x2 flash drive emergency and it not usefull cz i cannot find it in device manger
Hi Folks,
I need a help in my lumia 720, I was using W 10 in my phone without problems but while the upgrade to 10149 the phone begin a looping nokia logo and gears.
I tried use differents pc, none detected my phone, with differs usb cable , and I tried some of solutions as Nokia care suite, WPRT, Lumia recovery tool, command using thor2.
All times my phone not detected. Someone have the same problem ? and have a fix ? or any idea to solve ?
Best regards
Hi @fccom,
You have tried with undetected phone option (in bottom) in WPRT?
Yes, into nokia care suite, lumia recovery tool too.
Are you able to boot your Lumia device in FFU DL Mode?
Here is the procedure:
Khaagan said:
Press and hold the power button to start your Lumia device.
When your Lumia device starts, it displays the Microsoft or Nokia logo. At this instant, release the power button, then press and hold the volume up button. This step should be done quickly.
After a few seconds, an image composed of a white lightning and a white gear wheel appear on the screen of your Lumia device. At this instant, release the volume up button.
Click to expand...
Click to collapse
Yes I tried , but in this step I recieved a error , later I will post the error , but was something about connection
My phone is recognized as unknow device error code 43
"the use this command line
Code:
thor2 -mode emergency -hexfile HEX.hex -mbnfile msimage.mbn -orig_gpt
Ready, disconnect the battery and reconnect. Now connect your phone to the PC
Yeah, his phone started life with red screen!
Charge the battery"
Do you have other idea to solve conection with pc , and hard reste ?
Thanks
fccom said:
Do you have other idea to solve conection with pc , and hard reste ?
Thanks
Click to expand...
Click to collapse
HI, I had the same on my Lumia 930, keeping rebooting on gears.....
It works with lumia recovery and trying with the vol down + power. But it wasn't the first time.... i needed 3 or 4 tries.
The Pc detected the phone ?
Because my lumia ever is recognized with unknow device.
fccom said:
Hi Folks,
I need a help in my lumia 720, I was using W 10 in my phone without problems but while the upgrade to 10149 the phone begin a looping nokia logo and gears.
I tried use differents pc, none detected my phone, with differs usb cable , and I tried some of solutions as Nokia care suite, WPRT, Lumia recovery tool, command using thor2.
All times my phone not detected. Someone have the same problem ? and have a fix ? or any idea to solve ?
Best regards
Click to expand...
Click to collapse
It happened to me too..... just use the windows phone image designer by following the tutorial of @Khaagan It recovered my phone
souma_rox said:
It happened to me too..... just use the windows phone image designer by following the tutorial of @Khaagan It recovered my phone
Click to expand...
Click to collapse
my problem is my phone not detected ....
this step fail
Booting your Lumia device
To continue this tutorial, it is necessary to boot your Lumia device in the Microsoft FFU Download Mode. To do so, follow the five steps mentioned below:
Turn off your Lumia device.
Press and hold the power button to start your Lumia device.
When your Lumia device starts, it displays the Microsoft or Nokia logo. At this instant, release the power button, then press and hold the volume up (+) button. This step should be done quickly.
After a few seconds, an image composed of a white lightning and a white gear wheel appear on the screen of your Lumia device. At this instant, release the volume up (+) button.
Connect your Lumia device at your PC, this one should simply detect it.
fccom said:
my problem is my phone not detected ....
this step fail
Booting your Lumia device
To continue this tutorial, it is necessary to boot your Lumia device in the Microsoft FFU Download Mode. To do so, follow the five steps mentioned below:
Turn off your Lumia device.
Press and hold the power button to start your Lumia device.
When your Lumia device starts, it displays the Microsoft or Nokia logo. At this instant, release the power button, then press and hold the volume up (+) button. This step should be done quickly.
After a few seconds, an image composed of a white lightning and a white gear wheel appear on the screen of your Lumia device. At this instant, release the volume up (+) button.
Connect your Lumia device at your PC, this one should simply detect it.
Click to expand...
Click to collapse
It will detect the phone It shows the phone name difeerent like noki6915.366 bla bla bla. just select the .ffu image file and press flash
fccom said:
my problem is my phone not detected ....
this step fail
Booting your Lumia device
To continue this tutorial, it is necessary to boot your Lumia device in the Microsoft FFU Download Mode. To do so, follow the five steps mentioned below:
Turn off your Lumia device.
Press and hold the power button to start your Lumia device.
When your Lumia device starts, it displays the Microsoft or Nokia logo. At this instant, release the power button, then press and hold the volume up (+) button. This step should be done quickly.
After a few seconds, an image composed of a white lightning and a white gear wheel appear on the screen of your Lumia device. At this instant, release the volume up (+) button.
Connect your Lumia device at your PC, this one should simply detect it.
Click to expand...
Click to collapse
If you have done all the previous steps coorectly it should look like this.. It may give error once or twice during flashing between 15%-60% dont't worry just close the software and reopen it. Then remove battery from ur phn re-enter it anen it in download mode and start flashing again..... dont panic
souma_rox said:
If you have done all the previous steps coorectly it should look like this.. It may give error once or twice during flashing between 15%-60% dont't worry just close the software and reopen it. Then remove battery from ur phn re-enter it anen it in download mode and start flashing again..... dont panic
Click to expand...
Click to collapse
My phone not is detected, I did the change in pc settings, install lumiaflashingtool but nothing, I tried with 2 pcs , still show unknow device.
MY HONOR CHE1-L04 IS DEAD , I HAVE ALL THE STOCK rom image files.. how to flash it.
the phone is currently in Qualcomm HS-USB QDloader 9008(COM3)
I DONT HAVE PROFIE.XML FILE. PLEASE KINDLY HELP.
neilrayer said:
MY HONOR CHE1-L04 IS DEAD , I HAVE ALL THE STOCK rom image files.. how to flash it.
the phone is currently in Qualcomm HS-USB QDloader 9008(COM3)
I DONT HAVE PROFIE.XML FILE. PLEASE KINDLY HELP.
Click to expand...
Click to collapse
Not able to boot into bootloader?
No I can't boot in bootloader... The phone is dead only.. Red color notification led while plugging the Charger.
neilrayer said:
No I can't boot in bootloader... The phone is dead only.. Red color notification led while plugging the Charger.
Click to expand...
Click to collapse
Bad. Only some devs can help. Is it under warranty?
Nope.. Not under warranty
neilrayer said:
Nope.. Not under warranty
Click to expand...
Click to collapse
Bad luck. This is bad situation and need very expert suggestions
neilrayer said:
No I can't boot in bootloader... The phone is dead only.. Red color notification led while plugging the Charger.
Click to expand...
Click to collapse
If there is charging led or vibration there is still hope to get it recover.
hassanjavaid8181 said:
If there is charging led or vibration there is still hope to get it recover.
Click to expand...
Click to collapse
Yes there is red colored charging led. But no vibration
neilrayer said:
Yes there is red colored charging led. But no vibration
Click to expand...
Click to collapse
It is Qualcomm mode and need deep dive to fix. Only dev or someone with hell lof of expertise in this can help. You may need multiple files and drives. I was in same situation on my yu yureka but want able to revive as last step was to shirt circuit the board to fix but that was risky
Yeah.. For yureka.. Development was active and had more developers... I gave my phone now to local service center
neilrayer said:
Yes there is red colored charging led. But no vibration
Click to expand...
Click to collapse
if you are not that expirience my advice you to is you should get it to huawei service center and get it fixed by paying some charges.
Honor
hassanjavaid8181 said:
If there is charging led or vibration there is still hope to get it recover.
Click to expand...
Click to collapse
I have same problem in my honor 4x Che1-L04 device.If we switched on its showing honor logo after that it will be switched off immediately.if we r connecting the mobile usb to laptop then pressing power+volume it's showing fastboot & rescue mode (Andriod logo) And phone unlocked.Its vibrating when ever we will press power button.But its not boot or recovery bode.Please tell me is there any way to get boot.
thiru225mahi said:
I have same problem in my honor 4x Che1-L04 device.If we switched on its showing honor logo after that it will be switched off immediately.if we r connecting the mobile usb to laptop then pressing power+volume it's showing fastboot & rescue mode (Andriod logo) And phone unlocked.Its vibrating when ever we will press power button.But its not boot or recovery bode.Please tell me is there any way to get boot.
Click to expand...
Click to collapse
Do you have a custom recovery installed?