*** DO NOT FLASH THIS IF YOU ARE RUNNING SAFESTRAP - YOU HAVE BEEN WARNED ***
*** USE AT YOUR OWN RISK! I AM NOT RESPONSIBLE IF THINGS GO WRONG. ***
Introduction
I am very proud to bring you HDX Nexus ROM. This is for both the Kindle Fire HDX 7" and 8.9" WIFI only variants and brings full AOSP functionality. This is for users with TWRP installed.
Click to expand...
Click to collapse
Features
- Full Jelly Bean 4.2.2 AOSP functionality
Click to expand...
Click to collapse
Bug Reports
- Please use the Bugs section on this thread, it will make it a lot easier to to keep track.
Click to expand...
Click to collapse
Fresh Installation
- Flash thor-nexus-rom.zip or apollo-nexus-rom.zip
- Flash hdx-nexus-gapps-v1.2.zip
- Then flash any addons
- If coming from any other ROM or Safestrap based ROM then do a factory reset.
- Reboot and enjoy.
Click to expand...
Click to collapse
Upgrading From Previous Version
- Flash thor-nexus-rom.zip or apollo-nexus-rom.zip
- Flash hdx-nexus-gapps-v1.2.zip
- Wipe Dalvik Cache and Cache
- Then flash any addons
- Reboot and enjoy.
Click to expand...
Click to collapse
Changelog
- v2.0.4 -> v2.0.5
Code:
- CIFS Support
- Clock retention/reset problem fixed
- Busybox is now integrated
- v2.0.3 -> v2.0.4
Code:
- Switched to custom kernel
- Kernel is compiled with Sabermod 4.7 toolchain
- Added the following CPU governors:
- abyssplug v2
- adaptive
- intelliactive
- intellidemand
- interactive
- lazy
- lionheart
- nightmare
- ondemandplus
- optimax
- pegasuq
- userspace
- wheatley
- Updated security package ready for selinux
- Updated devfreq driver
- Lastest Amazon music application is now working
- Latest Amazon kindle application is now working
Click to expand...
Click to collapse
Downloads
- Apollo Nexus ROM
- Thor Nexus ROM
- Gapps 1.2
Click to expand...
Click to collapse
Add-Ons
- Dolby Digital v1.2 for HDX Nexus >= 2.0.5
- Dolby Digital v1.1 for HDX Nexus <= 2.0.4
Click to expand...
Click to collapse
FAQ
Q. How do I mount a CIFS share?
- make a folder in your /sdcard for your shares ( /sdcard/shares/ )
- make a folder within /sdcard/shares/ for your CIFS share ( /sdcard/shares/nasdrive/ )
- open a terminal app or adb shell into your device from your computer
- su - to gain root access
- use the following command to mount your network share to the previously created folder
Code:
mount -o unc=192.168.1.7Data,username=<name>,password=<pass> -t cifs none /sdcard/shares/nasdrive
Click to expand...
Click to collapse
Finally
- Thank you to everyone for your ongoing support and to everyone that made a Donation.
Click to expand...
Click to collapse
XDA:DevDB Information
HDX Nexus, ROM for the Amazon Kindle Fire HDX 7" & 8.9"
Contributors
ggow
Source Code: https://github.com/ggow/android_kernel_hdx_nexus/tree/android_4.2.2
ROM OS Version: 4.2.x Jelly Bean
ROM Kernel: Linux 3.4.x
Based On: AOSP JDQ39
Version Information
Status: Stable
Current Stable Version: 2.04
Stable Release Date: 2015-02-06
Created 2014-08-02
Last Updated 2017-06-01
[Safestrap Only] HDX Nexus ROM 2.0.2
For devices on stock .3.2.4 with Safestrap Only
- Apollo HDX Nexus ROM
- Thor HDX Nexus ROM
any love for Thor?
stapler85 said:
any love for Thor?
Click to expand...
Click to collapse
I haven't got a thor device, if someone can loan me a thor then I'd be happy to port it across.
Files Uploaded
Files are now up...
Thank you so much
link!? :good::good::good::good:
fryheit said:
link!? :good::good::good::good:
Click to expand...
Click to collapse
Click on the download section on this thread.
i am using safestrap but i f**d up my stock rom so i have your versin on the stock can i just flash on top and then wipe cache dalwik and data?
fryheit said:
i am using safestrap but i f**d up my stock rom so i have your versin on the stock can i just flash on top and then wipe cache dalwik and data?
Click to expand...
Click to collapse
I am running it in stock, so yes give it go. It should be ok.
I wiped dalwik, data, cache and system. thenn flashed nexus than gapps. now it is stuck on a blackscreen after the safestrap.. any ideas? i dont have my twrp data restore on the kindle anymore..
fryheit said:
I wiped dalwik, data, cache and system. thenn flashed nexus than gapps. now it is stuck on a blackscreen after the safestrap.. any ideas? i dont have my twrp data restore on the kindle anymore..
Click to expand...
Click to collapse
Which version of Apollo Gapps and safestrap did you have installed?
ggow said:
Which version of Apollo Gapps did you have installed?
Click to expand...
Click to collapse
1.3
Damn.. how do i copy back the data backup from the pc in twrp.. i also still have the 1.3 apollo zip/rom on the device
fryheit said:
1.3
Damn.. how do i copy back the data backup from the pc in twrp.. i also still have the 1.3 apollo zip/rom on the device
Click to expand...
Click to collapse
Ok, you need to have come from an update that was based on 14.3.1.0 stock kernel, apollo gapps 1.3 is based on 14.3.2.4.
Hold the power button down for about 20 seconds and the device should power off then you should be able to get back into safestrap to flash apollo gapps 1.3.
ggow said:
Ok, you need to have come from an update that was based on 14.3.1.0 stock kernel, apollo gapps 1.3 is based on 14.3.2.4.
Hold the power button down for about 20 seconds and the device should power off then you should be able to get back into safestrap to flash apollo gapps 1.3.
Click to expand...
Click to collapse
I just tried that, it isnt working either anymore.. i think i remember that when i installed it after flashing the rom i had to restore my data partition on top or something like that.. what i do now..
Ggow u are the man!!!!
Sent from my LG-D800 using XDA Premium 4 mobile app
fryheit said:
I just tried that, it isnt working either anymore.. i think i remember that when i installed it after flashing the rom i had to restore my data partition on top or something like that.. what i do now..
Click to expand...
Click to collapse
can you get into safestrap?
If so you have adb access. With this you could push the twrp data from your pc back to the device.
holeshot77 said:
Ggow u are the man!!!!
Sent from my LG-D800 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Cheers mate, have you got it up and running?
ggow said:
can you get into safestrap?
If so you have adb access. With this you could push the twrp data from your pc back to the device.
Click to expand...
Click to collapse
yeah thats what im triing now, but whats the commend to push a folder and not a file.. sorry for the mess, i was just so happy about asop.. are you gonna make a version for like 1.3 also?
fryheit said:
yeah thats what im triing now, but whats the commend to push a folder and not a file.. sorry for the mess, i was just so happy about asop.. are you gonna make a version for like 1.3 also?
Click to expand...
Click to collapse
This should do it...
adb push <folder-name> /sdcard/<folder-name>/
fryheit said:
yeah thats what im triing now, but whats the commend to push a folder and not a file.. sorry for the mess, i was just so happy about asop.. are you gonna make a version for like 1.3 also?
Click to expand...
Click to collapse
I don't think there is any need or advantage to making a new version. The only reason Apollo Nexus is based on 14.3.1.0 was because of how long ago I started working on it and the amount of work that had already gone in didn't warrant deviating from that path.
I know there are some that have managed to downgrade successfully.
Related
Disclaimer: I take no responsibility for bad things that may occur as a result of flashing this.
NOTE: If coming from 10.1, make a back up first as you will not be able to flash back to 10.1 unless you factory reset
These are Official CM 10.2 builds for the Galaxy Note 8.0 N5110
Prereq: Unlocked Bootloader
It is recommended to flashed this in CWM .
Source: http://github.com/CyanogenMod
Instructions:
-Download and copy rom to sdcard
-Download and copy gapps to sdcard (make sure they are for 4.3!)
-Reboot into recovery (CWM)
-Flash rom
-Flash gapps
-Wipe data/cache
-Reboot
Known Bugs:
-BT voice search
ROM: http://download.cyanogenmod.org/?device=n5110
****** All links below this are UNOFFICIAL builds ******************
[8/1]ROM: http://www.androidfilehost.com/?fid=23060877489997662
Changes:
- Initial Release
[8/27] ROM: http://www.androidfilehost.com/?fid=23060877490002894
Changes:
- Upstream CM changes
[9/12] ROM: http://www.androidfilehost.com/?fid=23134718111252562
Changes:
- Fixed graphical glitches / black screens
- Upstream CM changes
[9/20] ROM: http://www.androidfilehost.com/?fid=23134718111254117
Changes:
- changed to tvdpi (fixes icon blur)
- Upstream CM Changes (including netflix fix!)
[10/08] ROM: http://www.androidfilehost.com/?fid=23159073880934700
Changes:
- Boost speaker volume slightly
- Add opensource camera (fixes front cam freezing)
- Upstream CM Changes
[10/10] ROM: http://www.androidfilehost.com/?fid=23159073880935566
Changes:
- Updated to 4.3.1
- Add IRDA service/support (needs testing)
- Opensource Sensors (fixes incorrect light_sensor reading really high instead of 0 or -1)
- Correctly read Wifi mac address
- Charging tweaks (need charging speed tested)
[10/14] ROM: http://www.androidfilehost.com/?fid=23159073880936401
Changes:
- Upstream CM Changes
- Fix Haptic feedback for back/menu keys
- Fix screen staying on while tablet is off and charging
[10/23] ROM: http://www.androidfilehost.com/?fid=23189362627840660
Changes:
- Upstream CM Changes
- Fix magnetic cover support (turn on/off screen)
- Fix Bluetooth (99% sure this is good, can anyone else confirm?)
- Fix wifi mac address again (should be good for sure now)
please make for N5100 :crying:
thanks for this, Scott!
Can we use the 0301 Gapps?
Must use 4.3 gapps. Google them, they're out there.
thats what I thought..I have the PA gaaps. which are 4.3, so I will try them
thanks
EDIT: found the non pa gapps, so gonna use them..thanks again!
Thanks for the build.
One question: Is the source in your 10.2 branch current? I see last update 9 days ago and I'd like to fork it for my own try.
Gesendet von meinem GT-N5100 mit Tapatalk 4
Anyone having any luck with this rom? I downloaded it twice, clean install, etc... Everything force closes for me. Can't even type because the keyboard FC, the back button won't work, the top bar is all out of whack.
works perfectly for me..make sure you use 4.3 gaaps, and fully factory wipe before flashing
wase4711 said:
works perfectly for me..make sure you use 4.3 gaaps, and fully factory wipe before flashing
Click to expand...
Click to collapse
Yup, full wipe and PA 4.3 gaaps. Maybe I'll give it another go in a bit. I've got a good set up going as is, so even if I can't get it working it's not a huge deal.
dont use PA gapps, use plain 4.3 gaaps..
get them here
http://d-h.st/6Oz
wase4711 said:
dont use PA gapps, use plain 4.3 gaaps..
get them here
http://d-h.st/6Oz
Click to expand...
Click to collapse
Tried with no gapps and had no luck. Maybe just a bad download, although I did d/l twice.
edit - downloaded the rom one more time and installed the PA 4.3 gapps and all is well. Third time was the charm.
sbrissen said:
Disclaimer: I take no responsibility for bad things that may occur as a result of flashing this.
NOTE: If coming from 10.1, make a back up first as you will not be able to flash back to 10.1 unless you factory reset
These are Unofficial CM 10.2 builds for the Galaxy Note 8.0 N5110
Prereq: Unlocked Bootloader
It is recommended to flashed this in CWM .
Source: http://github.com/sbrissen
Instructions:
-Download and copy rom to sdcard
-Download and copy gapps to sdcard (make sure they are for 4.3!)
-Reboot into recovery (CWM)
-Flash rom
-Flash gapps
-Wipe data/cache
-Reboot
Does this ROM really work? Tried downloading twice and from different mirrors but always get error during installation and it 'Aborts ...'.
I would have loved to give it a try though.
Click to expand...
Click to collapse
how long does it take / how difficult is it to compile these Roms? would love to help out development if I could figure out how to do it.
ddye said:
sbrissen said:
Disclaimer: I take no responsibility for bad things that may occur as a result of flashing this.
NOTE: If coming from 10.1, make a back up first as you will not be able to flash back to 10.1 unless you factory reset
These are Unofficial CM 10.2 builds for the Galaxy Note 8.0 N5110
Prereq: Unlocked Bootloader
It is recommended to flashed this in CWM .
Source: http://github.com/sbrissen
Instructions:
-Download and copy rom to sdcard
-Download and copy gapps to sdcard (make sure they are for 4.3!)
-Reboot into recovery (CWM)
-Flash rom
-Flash gapps
-Wipe data/cache
-Reboot
Does this ROM really work? Tried downloading twice and from different mirrors but always get error during installation and it 'Aborts ...'.
I would have loved to give it a try though.
Click to expand...
Click to collapse
its been on my tablet since 8-1, working fine with no problems
are you rooted? what recovery are you using?
Click to expand...
Click to collapse
Please make it for N5120. :fingers-crossed:
wase4711 said:
ddye said:
its been on my tablet since 8-1, working fine with no problems
are you rooted? what recovery are you using?
Click to expand...
Click to collapse
I have CWM and rooted. I once tried the 4.2.2 leak and went very well but reverted back to stock for stability and usability.
What is your overall assessment of CM 10.2 on our tablet (5110)?
Many thanks
EDIT: The OP says 'Unlocked Bootloader', is that so?
Click to expand...
Click to collapse
wase4711 said:
ddye said:
its been on my tablet since 8-1, working fine with no problems
are you rooted? what recovery are you using?
Click to expand...
Click to collapse
No graphical glitches or black screens?
Click to expand...
Click to collapse
hermeticist said:
wase4711 said:
No graphical glitches or black screens?
Click to expand...
Click to collapse
havent noticed any yet
---------- Post added at 08:41 AM ---------- Previous post was at 08:40 AM ----------
ddye said:
wase4711 said:
I have CWM and rooted. I once tried the 4.2.2 leak and went very well but reverted back to stock for stability and usability.
What is your overall assessment of CM 10.2 on our tablet (5110)?
Many thanks
EDIT: The OP says 'Unlocked Bootloader', is that so?
Click to expand...
Click to collapse
as long as you are rooted, you can install with no problems
Click to expand...
Click to collapse
Click to expand...
Click to collapse
I installed 10.2 and 4.3 gapps and all seemed find until I ran titanium backup.
It couldn't get root access
try installing busybox, then reboot
Earlier, I have been compiling several ROMs for the galaxy tab (P7510/p4wifi) based on KitKat 4.4. I now decided to move over to OMNI ROM as base: http://omnirom.org/
The nice thing of OMNI in my personal opinion is smoothness: it is relatively low in features, but at the same time it is not that resource hungry as some other ROMs. The end result is a smooth ROM.
Changelog of 15-Feb-2014
-Omni codebase of 14-Jan
Several small fixes, nothing spectecular
It features the Infamous kernel (same kernel as for JB4.3, without SELinux). The zram code has been optimized (based on google advice for low-RAM devices) and is enabled by default.
To see the additions on top of Omni, check github (additional patches are always shown on top):
Frameworks
Settings
OmniGears
First installation:
-Boot into recovery
-Factory reset
-Wipe system partition
-Install ROM
-Boot tablet (there sometimes are bootloops if gapps is flashed directly on top of the ROM without first booting the ROM)
-Reboot recovery
-Install SuperSU: http://download.chainfire.eu/371/SuperSU/UPDATE-SuperSU-v1.85.zip
-Install gapps (you should use a package specifically for KK4.4 and with the old-fashioned updater-script! - don't worry if you install an outdated gapps packages with the correct updater-script, as long as it is for KK4.4 the apps in the gapps package will be automatically updated -> only small gapps packages fit, e.g. banks core of pa 0-day gapps mini)
-Boot it up
-> some people report issues (e.g. bootloop or crashing gapps) if they flash ROM, gapps & supersu in a row after fully wiping the tablet. In that case, wipe again, flash ROM, boot the tab, reboot to recovery, and then flash the rest.
-> if coming from stock ROM, a factory reset may wipe you entire /data partition, so you loose you sdcard contents as well (I think this only happens with CWM, but I'm not sure)
-> in CWM "wipe system partition" can be found under mounts, and is called "format /system"
->If you get the message 'This package is for "p4" devices this is a "GT-P7500"' (or something likewise) update to a recent CWM or TWRP
Update installation (OMNI -> OMNI):
-Boot into recovery
-Install ROM
-Install SuperSU (in the SuperUser app you can create a script that will automatically backup/restore SuperSU on ROM updates so you don't have to reflash SuperSU).
-Boot it up
You can download any gapps packages for kitkat that you like, but one that many have used successfullyis PA 0 day gapps:
http://forum.xda-developers.com/showthread.php?t=2397942
Downloads:
P4WIFI:
http://rootaxbox.no-ip.org/kasper_h/roms/p4wifi/omni44/
P4:
http://rootaxbox.no-ip.org/kasper_h/roms/p4/omni44/
Credits:
OMNI team for the code
AAccount for his help along the way to get KK4.4 to compile for our aging device!
pershoot for the basis for the device trees & kernel base
Code:
Basis of OMNI code: https://github.com/omnirom/
Common p4 device tree: https://github.com/kasperhettinga/android_device_samsung_p4-common
Device tree p4wifi: https://github.com/kasperhettinga/android_device_samsung_p4wifi
Vendor blobs p4wifi: https://github.com/kasperhettinga/android_vendor_samsung_p4wifi
Device tree p4wifi: https://github.com/kasperhettinga/android_device_samsung_p4
Vendor blobs p4wifi: https://github.com/kasperhettinga/android_vendor_samsung_p4
What does NOT work?
-There are graphical glitches. Although they mainly have been solved there seem to be some remaining issues with hwcomposer that may crash the tab.
-Bluetooth audio does not work (other Bluetooth functions do work).
-HDMI output (may be fixed according to some posts, didn't test myself yet)
-HD movies (in e.g. youtube) may stutter
Smoothness advice:
Go to performance settings:
-Overclock CPU to 1400MHz (Do this at your own risk!)
-Set IO scheduler to CFQ
-Keep governor on Interactive
Go to developer settings:
-Set the three animation scale options to 0.5x
-Activate "Force GPU rendering"
-Active "Disble HW-overlays"
-Set background process limit to 4 processes
(if performance/developer options are not yet shown, go to settings>about and press build number 7 times)
-> Thanks to all forum members contributing to this list
-> Do it at your own risk!
-> Don't complain about limited battery life (ROW+interactive+1000MHz leads to better battery life for sure)
Some other tips:
-For improvement of sound quality, you can use Viper4Android
-For more volume only, SpeakerBoost is earier to use
-For netflix, head over here: http://forum.xda-developers.com/showpost.php?p=49208063&postcount=445
-To be able to use Flash player, use a browser that doesn't use the kitkat browser engine (e.g. firefox can be used). Download flash player from adobe website (thanks to AAccount for finding out!).
- If you can't see your internal SD on PC: Go to Settings -> Storage -> 3 dot menu -> tick MTP.
-To use the multi-window feature, go to the recent apps screen, press&hold an app, and select put aside.
Great......downloading now
Sent from my GT-N7000 using Tapatalk
p4
is there any p4 version in progress br zezam?
Nice work :good:
you will get version and for the P7500 ?
kasper_h said:
Reserved
Click to expand...
Click to collapse
i'm new to Galaxy tab 10.1..LOL,,, can this ROM be installed directly from Stock ROM with TWRP,,,Please help ASAP
zezam67 said:
is there any p4 version in progress br zezam?
Click to expand...
Click to collapse
paiktaras said:
Nice work :good:
you will get version and for the P7500 ?
Click to expand...
Click to collapse
Kasper already said that he won't be building for the p4.
Looks like my P7500 is gonna be a P7510 soon..
BTW, we still need to flash supersu zip?
Sent from my GT-P7500 using Tapatalk HD
Xenodrome_ said:
i'm new to Galaxy tab 10.1..LOL,,, can this ROM be installed directly from Stock ROM with TWRP,,,Please help ASAP
Click to expand...
Click to collapse
Just wipe everything and flash the ROM.
eushaun99 said:
Kasper already said that he won't be building for the p4.
Looks like my P7500 is gonna be a P7510 soon..
BTW, we still need to flash supersu zip?
Sent from my GT-P7500 using Tapatalk HD
Click to expand...
Click to collapse
You need to separately flash SuperSU. SuperSU can create a script for backing it up, so that on future ROM flashes you don't have to repeat this.
oooppppsss the ROM can not be installed in a P4
Hi,
I have tried to install the ROM in a P4 and I receive an error saying "this device is a P4 and the ROM can not be installed"
esfjrg1 said:
Hi,
I have tried to install the ROM in a P4 and I receive an error saying "this device is a P4 and the ROM can not be installed"
Click to expand...
Click to collapse
Doh, its a p4wifi ROM. If you don't use 3g, flash a p4wofi recovery first, reboot, and flash again.
Sent from my GT-P7500 using Tapatalk HD
esfjrg1 said:
Hi,
I have tried to install the ROM in a P4 and I receive an error saying "this device is a P4 and the ROM can not be installed"
Click to expand...
Click to collapse
Flash P4wifi recovery, Then flash this ZIP again
Bad to see that it is really not for the GT-P7500 . So i will not update.... i really need my 3G
Why it is so difficult to get 3G working Did 4.4 change so much?
Traace said:
Flash P4wifi recovery, Then flash this ZIP again
Bad to see that it is really not for the GT-P7500 . So i will not update.... i really need my 3G
Why it is so difficult to get 3G working Did 4.4 change so much?
Click to expand...
Click to collapse
The problem is that in 4.4 the radio stuff has been redone. I also had problem with another device I develop for (SGS) to get the radio to work. And to develop a ROM for a device I don't own make it even more complicated. In the past weeks I sometimes flashed 10-15 testbuilds on a single day to try and fix something simple (like USB OTG). If someone else would test something for me, the progress would be way too slow.
But all my code is open source: someone with a p7500 can just grab all the code, adapt it to p7500 and compile it. And start the whole process of fixing bugs
I get a unfortunately, setup wizard has stopped error and can not pass it.. Anything to work around it?
Sent from my SPH-L720 using xda app-developers app
@kasper_h As you might awared, YouTube is broken. It ran the same problem at that time with my GT-N7000 with OMNI 4.4, they managed to fix it. Maybe you can check with herna on that thread.
So far so good running ART
Sent from my GT-N7000 using Tapatalk
I also get the com.google.process.location has stopped error but I can pass that one..
Sent from my SPH-L720 using xda app-developers app
kasper_h said:
First installation:
-Install gapps (you can download any gapps package you like, as long as it is specifically for JB4.3!)
Click to expand...
Click to collapse
Is there a difference between 4.3/4.4 gapps?
Sent from my myTouch 4G using Tapatalk
Chris4809 said:
I get a unfortunately, setup wizard has stopped error and can not pass it.. Anything to work around it?
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
Which gapps package? I flashed ROM & gapps myself today as well, just to test it once more. And it works flawlessly.
rogconnect said:
@kasper_h As you might awared, YouTube is broken. It ran the same problem at that time with my GT-N7000 with OMNI 4.4, they managed to fix it. Maybe you can check with herna on that thread.
So far so good running ART
Sent from my GT-N7000 using Tapatalk
Click to expand...
Click to collapse
Youtube is a problem with some hardware blobs I believe. I had the same on AOKP. I have spend a lot of time, but could never solve it. I decided to ignore it
Chris4809 said:
I also get the com.google.process.location has stopped error but I can pass that one..
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
jaibar said:
Is there a difference between 4.3/4.4 gapps?
Sent from my myTouch 4G using Tapatalk
Click to expand...
Click to collapse
Yes, you should only use kitkat (4.4) gapps!
kasper_h said:
Which gapps package? I flashed ROM & gapps myself today as well, just to test it once more. And it works flawlessly.
Youtube is a problem with some hardware blobs I believe. I had the same on AOKP. I have spend a lot of time, but could never solve it. I decided to ignore it
Yes, you should only use kitkat (4.4) gapps!
Click to expand...
Click to collapse
If it is 4.4 gapps you might want update the OP.. It is telling us that we should use 3.4
Sent from my SPH-L720 using xda app-developers app
After enabled ART on first boot then rebooted. And then rebooted to recovery to install Banks 12-14_GApps_Core_4.4.2_signed.zip.. then I can signed in Google...so far no FC on Google apps.
Sent from my GT-P7510 using Tapatalk
I'm getting the "setup wizard has stopped" error also.
Coming from pac_P4wifi_4.3-Infamous_20131114
Followed install instructions.
Used gapps-jb-20130813-signed
Cannot find gapps for 4.4. The 20130813 (4.3) package seems to be the most current.
ZAxon DMix7
v0.3
Read Carefully!
Code:
#include
/*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
Hello everyone,
Here i am for the first time posting a ROM (yeah never had done such thing, tilll now :O so kill me if there is something wrong OK ) here are the following changes from Stock Rom.
Changes / Features:
- Base on A2017U B29.
- Partial de-bloated. (If Want more De-bloated version let me know in the comments)
- Deodex.
- Rooted (Using SuperSU v2.65).
- 5 Extra Themes for the Total of 7 themes.
Click to expand...
Click to collapse
Requirements:
- Unlock Bootloader
- Latest TWRP 3.02-2
- B29 Update
Click to expand...
Click to collapse
Notes:
- YOU MUST BE UNLOCK BOOTLOADER (Haven't tested for Lock Bootloader and if you are flashing this using lock Bootloader you are on your own)
- If you already have B29 installed, you can dirty flash ZAxon DMix7, apps/data won't be touch but if you have Xposed you need to reflash Xposed again.
- If you are not on B29 , you can update using the following guide :[GUIDE] A2017U.B29 Update
Click to expand...
Click to collapse
Download Link :
ZADMix7_Roms
Click to expand...
Click to collapse
Installation:
1- Reboot to TWRP
2- Wipe Cache - Dalvik
NOTE: If you are already have B29 you can dirty flash Dmix7, if NOT you will need to Wipe DATA.
3- Flash ZAxon_Dmix7_v0.1.zip
* Additional If you want Xposed , Flash Xposed after Dmix7
Click to expand...
Click to collapse
Thanks To/Credits:
* @ SuperR. for his super kitchen Linux Tools
Click to expand...
Click to collapse
XDA:DevDB Information
Z.A.D.Mix7, ROM for the ZTE Axon 7
Contributors
DrakenFX, DrakenFX
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: B29
Based On: Stock
Version Information
Status: Stable
Current Stable Version: v0.1
Stable Release Date: 2016-11-07
Created 2016-11-08
Last Updated 2017-04-09
Wow, another rom, i'm surprised to see another one. First the CM 13, now Nello, now this. Going to test it out
Change Log
* v0.1
- Initial Release.
- SuperSU v2.65
- Partial De-Bloated.
- Deodex.
- 5 Extra Themes (Total of 7 Themes).
*v0.2
- More De-Bloating
- On-Screen Navigation Bar.
- Multi-User (Up to 5 users)
*v0.3
- More De-Bloating (There be no more de-bloating after this)
- Google Dialer
- Google Contact
- Solid Explorer
- Nova Launcher Beta 5.0 beta 8
- Textra feel better than Google Messenger (if you haven't use it you'll love it)
- Added AdAway.
- Some Build.prop tweaks.
TROUBLESHOOTING
Q. How to disable On-screen keys?
A. Using your favourite Build.prop editor, look for this line:qemu.hw.mainkeys then change 0 for 1 and reboot.
Your On-screen Nav. Bars will be disabled permanent, till you change the value back to 0.
Q. AdAway or DPI changes are not working?
A. try disabling system write
* Using ADB
Code:
adb shell reboot disemmcwp
* Using Terminal Emulator
Code:
su
reboot disemmcwp
Your device will REBOOT and try again.
.
Gr8 to have traction in this community... Quick question it's booting? Have thevquestion bcoz another rom is not booting
Edit: booted and working fine
Sent from my ZTE A2017U using Tapatalk
`SBR` said:
Gr8 to have traction in this community... Quick question it's booting? Have thevquestion bcoz another rom is not booting
Sent from my ZTE A2017U using Tapatalk
Click to expand...
Click to collapse
tested myself , Clean flash and Dirty flash + Xposed installation after.
which rom isn't booting?
It's raining ROMS!
I may be missing something here but where is the download link?
Am I just not seeing the DL link?
[EDIT]
There it is....For some reason, it was just normal text (no link). I came back to check it, and it was now a link... Downloading now!
tabletalker7 said:
I may be missing something here but where is the download link?
Click to expand...
Click to collapse
tele_jas said:
Am I just not seeing the DL link?
[EDIT]
There it is....For some reason, it was just normal text (no link). I came back to check it, and it was now a link... Downloading now!
Click to expand...
Click to collapse
hehehehe sorry guys, forgot to attach the link , done now.
Downloading now:fingers-crossed:
DrakenFX said:
tested myself , Clean flash and Dirty flash + Xposed installation after.
which rom isn't booting?
Click to expand...
Click to collapse
It's booted fine, earlier I was testing the b03 rom and it's stuck in boot logo.
Sent from my ZTE A2017U using Tapatalk
`SBR` said:
It's booted fine, earlier I was testing the b03 rom and it's stuck in boot logo.
Sent from my ZTE A2017U using Tapatalk
Click to expand...
Click to collapse
I never try the b03 one, but I always test my files before posting and hopefully with little more time I'll be doing more modifications to it
`SBR` said:
It's booted fine, earlier I was testing the b03 rom and it's stuck in boot logo.
Sent from my ZTE A2017U using Tapatalk
Click to expand...
Click to collapse
Mine literally took 7 minutes to get past the Boot logo... You might give it a few minutes?
tele_jas said:
Mine literally took 7 minutes to get past the Boot logo
Click to expand...
Click to collapse
Yep, as it's deodexed initial boot to build the cache is more longer time...
Sent from my ZTE A2017U using Tapatalk
Confirmed as working - dirty flashed over B29, installed xposed framework at same time, everything working perfectly. Good job man
The more custom ROMs, the merrier!
Might be good to have a general outline on what has been removed during debloat.
Also, how big are those extra themes? Depending on how big they are, maybe it would be good to break them out into a separate, optional flashable zip.
Up and running smooth!
Happy to have the 1st, fully functional, custom ROM on my A7!
Great work!
tele_jas said:
Up and running smooth!
Happy to have the 1st, fully functional, custom ROM on my A7!
Great work!
Click to expand...
Click to collapse
How its battery life ?
Sent from my Pixel using XDA-Developers mobile app
Not too shabby
This is UNOFFICIAL crDroid for Samsung Galaxy S3 i9300
Always have a full functional backup before using this ROM. Just in case!
DO NOT install supersu, the rom has built-in root
TWRP
opengapps
****[ROM]****
crDroidAndroid-7.1.2-20180120-i9300-v3.8.5-UNOFFICIAL.zip
crDroidAndroid-7.1.2-20180319-i9300-v3.8.6-UNOFFICIAL.zip
crDroidAndroid-7.1.2-20180420-i9300-v3.8.7-UNOFFICIAL.zip
crDroidAndroid-7.1.2-20180616-i9300-v3.8.8-UNOFFICIAL.zip
crDroidAndroid-7.1.2-20180902-i9300-v3.8.9-UNOFFICIAL.zip
*************
Changelog Note:
- Since "crDroidAndroid-7.1.2-20180616-i9300-v3.8.8" version I changed the official boot animation of crDroidAndroid 3.x with the new one of crDroidAndroid 4.x. Do you like it?
First time installing crDroid to your i9300, or coming from another ROM:
- Make sure you're running a proper working Recovery (CWM or TWRP)
- Copy GApps and crDroid zip to your external SDCard
- Boot into Recovery
- Wipe system,data and cache
- Flash crDroid zip
- Flash GApps zip
- DO A DATA WIPE / FACTORY RESET
- Reboot
Upgrading from earlier version of crDroid:
- Copy crDroid ZIP to your external SDCard
- Boot into Recovery
- Wipe system and cache
- Flash crDroid zip
- Flash Gapps
- Reboot
Don't expect any support!
Thanks to:
- Google
- LineageOS
- SlimRoms
- OmniRom
- NamelessROM
- firebird11
- Many others... (if you're feeling upset being out of the thanks list just send a PM )
XDA:DevDB Information
UNOFFICIAL CrDroid for i9300, ROM for the Samsung Galaxy S III I9300
Contributors
gianogli
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.0.x
Based On: LineageOS, CrDroid
Version Information
Status: Beta
Created 2018-04-20
Last Updated 2019-06-09
Reserved
Very nice to see updates of this wonder ROM
@gianogli could U try build it with forkbomb's cherry-pick ? #HWComposer
Thanks.
Very nice
Kordius said:
Very nice to see updates of this wonder ROM
@gianogli could U try build it with forkbomb's cherry-pick ? #HWComposer
Thanks.
Click to expand...
Click to collapse
I searched some information regarding HWC, but a lot of people wrote on different forums that the code here is old and not stable enough for the daily use.
What do you think? Do you know if exists some more updated source code?
Bye bye...
gianogli said:
I searched some information regarding HWC, but a lot of people wrote on different forums that the code here is old and not stable enough for the daily use.
What do you think? Do you know if exists some more updated source code?
Bye bye...
Click to expand...
Click to collapse
https://github.com/fourkbomb/android_kernel_samsung_smdk4412/tree/cm-14.1-rebase
Quoting forkbomb ~Assuming you already have a source tree set up, and all the official repos downloaded,
you need to add a file like this to your local_manifests and cherry-pick these commits. Then, just "brunch i9300".~
I think it's more updated I'm using experimental builds for daily use and they are a lot better than "standard".
The best choice is talk with @GalaxyMaster_P who knows how to compile it.
Regards !
Hi, can I install Magisk Manager?
heisenmark said:
Hi, can I install Magisk Manager?
Click to expand...
Click to collapse
No reason why not - I did that ages ago - just uninstall SuperSU first.
sanguinesaintly said:
No reason why not - I did that ages ago - just uninstall SuperSU first.
Click to expand...
Click to collapse
Can you tell me how? SuperSU app is not installed...
heisenmark said:
Can you tell me how? SuperSU app is not installed...
Click to expand...
Click to collapse
just flash this and install magisk..
hi
great job
i'using it and all work fine
installed magisk…work
xposed work
substratum theme work
tested other kernel like boeffla...koffee..zanez-hybrid ----all work
thank
deleted
Fixed the problem of frozen videos? The hwc?
RayPR said:
Fixed the problem of frozen videos? The hwc?
Click to expand...
Click to collapse
You've posted this on multiple threads so it's probably down to you to try it and see for yourself. Be brave !
How to increase volume of this rom? can i install viper?
when new verzion is available?
mamad-me said:
when new verzion is available?
Click to expand...
Click to collapse
Golden rule - never ask for ETA.
Thank you very much for the contribution, it has an FM radio or you will have one that works with this rom because spiritfm turns, in advance thanks
hi
nik60 said:
hi
great job
i'using it and all work fine
installed magisk…work
xposed work
substratum theme work
tested other kernel like boeffla...koffee..zanez-hybrid ----all work
thank
Click to expand...
Click to collapse
What theme do you use, it's so beatiful )
XerKy said:
What theme do you use, it's so beatiful )
Click to expand...
Click to collapse
You mean launcher or status bar?
Note 8 launcher from play store have Samsung icon
Status bar...is substratum theme
I'M NOT RESPONSIBLE FOR ANY DAMAGE AND/OR DATA LOSS AS A RESULT OF FLASHING THIS ROM !!!
PLEASE PERFORM FULL BACKUP IN THE MICRO SD CARD OR IN AN EXTERNAL STORAGE BEFORE YOU TRY !!!
Do you need reliability and predictability? Then better stay with THIS ROM
I have decided to create a separate thread because:
- I would like to distinguish Android Q BETA bug reports from my normal (Pie stable) thread, mentioned above
- It is normal that there will be definitely much more "bad reports" here, because most of them will be "beta related"
This thread will be closed when Samsung will release stable Android Q (One UI 2.0)
Everything you will need to know about DevBase ROM in general - you will find in my stable thread (mentioned above)
Differences comparing to stable Oreo DevBase ROM:
- No AppLock (yet)
S9 (SM-G960F/DS/FD):
>> G960FXXU7ZTA9_DevBase_v7.1.zip <<
Click to expand...
Click to collapse
S9+ (SM-G965F/DS/FD):
>> G965FXXU7ZTA9_DevBase_v7.1.zip <<
Click to expand...
Click to collapse
S9 Korean (SM-G960N):
>> [nobody sent me a dump yet] <<
Click to expand...
Click to collapse
S9+ Korean (SM-G965N):
>> G965NKSU2ZTA9_DevBase_v7.1.zip <<
Click to expand...
Click to collapse
Dirty flash over my Pie DevBase ROM SHOULD WORK WITHOUT ISSUES but before you try - I would highly recommend you to set default (stock) theme and default (stock) icons !!! However - I would recommend you clean install (Wipe -> Swipe to Factory Reset is enough)
NOTE1: This time it is mandatory to update also bootloader to Q - otherwise ROM will not boot
>> BL_G960FXXU7ZTA9.zip <<
Click to expand...
Click to collapse
>> BL_G965FXXU7ZTA9.zip <<
Click to expand...
Click to collapse
>> BL_G965NKSU2ZTA9.zip <<
Click to expand...
Click to collapse
NOTE2: If you want to perform clean install with encryption - it is highly recommended to use TWRP 3.2.3.0 to format /data. More info about bug with TWRP 3.3.1.x - HERE
Known issues:
- SafetyNet does not pass (it is intended by Samsung in beta builds)
- Please let me know
Thanks to:
- all users mentioned in my main thread
- @henklbr for links to update.zip(s)
- @corsicanu & @ambasadii for tips related to Q beta
Do you want to provide dump (e.g. for G960F or a newer version for G965F)?
Please do as follow:
- Make sure OEM unlock is ON
- Flash TWRP but don't let device boot to system after that - use power+bixby+vol_up combo immediately after phone rebooted automatically
- Tap "Keep read only"
- Wipe -> Format data -> "yes"
- Reboot -> Recovery
- Copy attached zip to the device
- Flash it and wait a few minutes
- Copy /sdcard/G960F_dump directory to the PC and compresss it (zip / 7z / rar / etc..)
- Share me and wait for a new Q build
NOTE: DO NOT use Magisk or other boot patchers before you run my zip - I need PURE clean kernel and other images !!! After you run my zip and copy result to PC - you can do what you want
G960F? ????????
Wow, this is fast. Even though this just a test, I'll try and report soon
Sent from my SM-G965F using Tapatalk
Unable to flash magisk
Bookmark wait for more feedback
I have Soldier's latest ROM on my S9+, and i want to try this ROM. I need to wipe "everything" in TWRP, and after a TWRP restart i need to flash the ROM, and after the BL, or first the BL and the ROM?
PrinceLc said:
Unable to flash magisk
Click to expand...
Click to collapse
Magisk is on board, there is no need to flash it separately
Ronam said:
I have Soldier's latest ROM on my S9+, and i want to try this ROM. I need to wipe "everything" in TWRP, and after a TWRP restart i need to flash the ROM, and after the BL, or first the BL and the ROM?
Click to expand...
Click to collapse
First ROM, then BL (one by one). This order is recommended because BL update forces auto reboot
_alexndr said:
Magisk is on board, there is no need to flash it separately
First ROM, then BL (one by one). Ci order is required because BL update forces auto reboot
Click to expand...
Click to collapse
Thanks, i'll try it.
I just found a major CSC issue in the installer (RC1) while updating device from Pie -> Q, please wait for updated version (RC2) !!! (RC1 worked fine only if your previous ROM was based on Q)
EDIT: Update will be available in less than one hour
_alexndr said:
I just found a major CSC issue in the installer (RC1) while updating device from Pie -> Q, please wait for updated version (RC2) !!! (RC1 worked fine only if your previous ROM was based on Q)
EDIT: Update will be available in less than one hour
Click to expand...
Click to collapse
What's that issue? I've had Soldier's Pie ROM before this one.
Ronam said:
What's that issue? I've had Soldier's Pie ROM before this one.
Click to expand...
Click to collapse
CSC just remain from Pie and CscFeatures does not work - you can dirty install RC2 to fix it
_alexndr said:
I just found a major CSC issue in the installer (RC1) while updating device from Pie -> Q, please wait for updated version (RC2) !!! (RC1 worked fine only if your previous ROM was based on Q)
EDIT: Update will be available in less than one hour
Click to expand...
Click to collapse
Just updated to RC2
Please re-download the ZIP file and re-flash the ROM
Can you make exposed work, the modules won't load
Mirror link? Mega stack at 44%
And where is TWRP 3.2.3.0
All fine flashed rc2 over soldier pie rom dirty
Thread has been updated again
This time due to new Beta 5 (ZSLG)
S9+ (SM-G965F/DS/FD):
>> G965FXXU7ZSLG_DevBase_v7.0_RC2.zip <<
Click to expand...
Click to collapse
Leejhay1714 said:
Mirror link? Mega stack at 44%
Click to expand...
Click to collapse
I will upload it also to AFH
amakuramio said:
And where is TWRP 3.2.3.0
Click to expand...
Click to collapse
G965F:
https://eu.dl.twrp.me/star2lte/
G960F:
https://eu.dl.twrp.me/starlte/
Iam on beta4 with hotfix installed,
complete stock no root nothing. I dumped and will upload for @ambasadii.
Maybe it will help @alexndr aswell
Cheers.
galaxy mini said:
Iam on beta4 with hotfix installed,
complete stock no root nothing. I dumped and will upload for @ambasadii.
Maybe it will help @alexndr aswell
Cheers.
Click to expand...
Click to collapse
I did it myself already (I called it beta 5), but next time I will be glad for help/dump as it is my wife's device - next time she most probably will not give me device for so long :laugh:
_alexndr said:
I did it myself already (I called it beta 5), but next time I will be glad for help/dump as it is my wife's device - next time she most probably will not give me device for so long :laugh:
Click to expand...
Click to collapse
Are You still waiting on a dump for s9?
Isn't there a way we can edit the props to install on s9?