Database Develop

[Q] Weird things going on!

Ok lets say i am in yahoo (dowloaded offical app not the pre-installed at&t IM app). I will finish what i am doing in yahoo, leave it running and return to the HOME screen. A few minutes later (after receiving no messages) I wake up my phone & it is yahoo! It shold still be at the HOME screen as this is the last thing that was open before sleep mode. This also happens randomly with my text and call log. I will make a call and hang up. Phone times out in 15 seconds and is left on the home screen. I wake it up and my list of calls is on the display....this should NOT BE! Text messages show up after the wake up some times as well. Additionally I am on my 3rd captivate with a brand new sim card and I will be on the phone for 5 minutes in a COMPLETE singnal area and my call will not just "drop" it's almost like the entire phone app disables and I lose all signal for 10 seconds & it regains and the screen blanks out. What gives??!!! I am using task manager and I have the "phone" ignored as proccess that it should not auto-kill so I do not know! Any help with any of these issues will be appreciated!

I would uninstall task manager first to make sure it's not the problem. If its still happening keep uninstalling apps one at a time until you get back to the factory loadout.
My thinking is that if this is your third phone then it's most likely a software issue. I haven't seen anything around the forums about similar problems out of the door so I have to think its something you've modified or an app that is causing the issue.
The only alternative i can think of would be to start reading up on each app you've installed to see I'd they've been tested on the captivate.
Good luck
Sent from my SAMSUNG-SGH-I897 using XDA App

[Q] Jenga not working?

Hi!
I'm on stock uk v10d, and I just downloaded today's amazon free app of the day, Jenga but I have problems with starting it. Whenever I start it, it gets stuck at the developers logo...
Anyone else with the same problem?
edit: Finally it started, as i left it for five minutes, but now I can't seem to exit it... back button doesn't work... however, great game, just buggy

Mine is working but it starts after ~30 sec. And I'm on cm7

I figured out that if i turn off the screen and right after it i turn it back on, the game starts...
There is the same issue on the Xoom... can this be a kind of incompatibility with Tegra2?
anyway now i can play the game, runs great, but the only way to exit it is to kill the process... i can live with it but i think i‘ll send feedback to the developer
Sent from my LG-P990 using XDA App

How long does it take for the apps to sync to gear live?

I noticed at times when I install a Gear compatible app it does not sync to the phone. At times it is instantaneous and at times it takes few minutes and at times I have to reset etc. This time around I installed Pebble Locker and it did not show up on the phone. I am not sure if I should even expect it to show on my phone. Any thoughts?

Figured that pebble locker does not have any component that resides on wear watch but still the question remains on how long the apps take to sync.

help! super lagging oculus 360photos

Hey need some help 360photos app on my gear vr for s6 has gotten some extreme lag now with head movement and I have no Idea why? Only app that does it... well cinema does it slightly but 360photos is like I'm tripping hard on shrooms or drank a fifth of vodka and everytime I move my head it's like a blur till I stop my head and it focuses. Does it regardless of Internet connection (turned on airplane mode to see if it was a streaming issue).* Uninstalled 360photos and oculus home neither of which helped me. Only thing I've really tinkered with in the actual vr apps is sideloading downloaded videos into milkvr app. Most of which don't work now that I downloaded the latest update, for some reason. I didn't convert them when uploaded them onto s6 just copied them but still not sure why that would be an issue. Anyone else having this issue or is there anything that I can do to make it clear up the way it was when I bought it. Really don't want to have go through the bulls hit Hassel of resetting my phone. Help would be greatly appreciated thanks.

I have experienced this a few times with my S6. Both times turned out to cause by some third party app. First one was a sense 7 clock widget. After uninstalling, issue went away. Second time was after installing sygic gps. Your issue could very well be the same, some rouge app that was poorly written.

verboten said:
I have experienced this a few times with my S6. Both times turned out to cause by some third party app. First one was a sense 7 clock widget. After uninstalling, issue went away. Second time was after installing sygic gps. Your issue could very well be the same, some rouge app that was poorly written.
Click to expand...
Click to collapse
No I got it fixed would say that was it but havn't deleted any apps. I had to go into the dialer enter *#0*# brings up a menu, select scope ( I think, been a few days since I figured it out) and you have to run checks on gyroscope and manually calibarate compass.

Android stops sending Notifications to Pebble Watch after time.

I have a Pebble Classic smartwatch (I know, old, unsupported, and discontinued) and a Huawei Honor 6X. My Pebble watch is able to pair and receive notifications fine. After some time, it stops receiving notifications. Sometimes after 5 minutes or even an hour. It doesn't re-sync till I disconnect it via the Pebble app (or settings on the watch) and then reconnect it. After that, it begins the process over by staying in sync after some time then stops receiving notifications.
Also, a strange thing I notice is it syncs in the morning when I wake up just fine without having to do anything.
When it stops receiving notifications both devices say they're still paired.
I have tried forgetting the device and then reconnecting. I have checked that my Pebble app isn't in the lock-screen cleanup list for the Huawei management. The Pebble app has Permissions to notifications. I do have the persistent notification within the Pebble app enabled. This happened before the Pebble servers went down and even after switching to Rebble. I do have Google Wear OS installed. Should I try using GadgetBridge?
My brother has the exact same watch with his iOS device and it works flawlessly.
Phone: Huawei Honor 6x Android 7.0
Pebble: v3.12.3
Is there something happening with the phones Bluetooth connection? Is it the Android operating system putting the app into sleep or something. Is it going into power save mode or something? If rooting my phone will provide a fix I am willing to do so.

phcreery said:
I have a Pebble Classic smartwatch (I know, old, unsupported, and discontinued) and a Huawei Honor 6X. My Pebble watch is able to pair and receive notifications fine. After some time, it stops receiving notifications. Sometimes after 5 minutes or even an hour. It doesn't re-sync till I disconnect it via the Pebble app (or settings on the watch) and then reconnect it. After that, it begins the process over by staying in sync after some time then stops receiving notifications.
Also, a strange thing I notice is it syncs in the morning when I wake up just fine without having to do anything.
When it stops receiving notifications both devices say they're still paired.
I have tried forgetting the device and then reconnecting. I have checked that my Pebble app isn't in the lock-screen cleanup list for the Huawei management. The Pebble app has Permissions to notifications. I do have the persistent notification within the Pebble app enabled. This happened before the Pebble servers went down and even after switching to Rebble. I do have Google Wear OS installed. Should I try using GadgetBridge?
My brother has the exact same watch with his iOS device and it works flawlessly.
Phone: Huawei Honor 6x Android 7.0
Pebble: v3.12.3
Is there something happening with the phones Bluetooth connection? Is it the Android operating system putting the app into sleep or something. Is it going into power save mode or something? If rooting my phone will provide a fix I am willing to do so.
Click to expand...
Click to collapse
You can try to exclude the app from androids Power saving. Also gadgetbridge can be tested(I'm using it with my PTS).

I tried gadget bridge and that does the same thing. Also I have it removed from my power management, nothing. I downloaded an app that supposedly keeps the Bluetooth alive. I'll give that a go.

I found a workaround.
I installed an app called BluetoothKeepActive and that seemed to fix the problem. It seems that my presumption was correct. The Bluetooth is going into standby mode or power management mode or something.

phcreery said:
I found a workaround.
I installed an app called BluetoothKeepActive and that seemed to fix the problem. It seems that my presumption was correct. The Bluetooth is going into standby mode or power management mode or something.
Click to expand...
Click to collapse
Seems to be an kernel issue of your phone imo.