Hello I need help I am using safe strap 3.72 on a at&t note 3. In my stock rom location in safe strap I have no os and I am unable flash a new rom or even restore a backup. I tried going to stock recovery to do a factory reset still unable to restore my stock rom. Is there a away to repair this problem. Please help
ryanalivingston said:
Hello I need help I am using safe strap 3.72 on a at&t note 3. In my stock rom location in safe strap I have no os and I am unable flash a new rom or even restore a backup. I tried going to stock recovery to do a factory reset still unable to restore my stock rom. Is there a away to repair this problem. Please help
Click to expand...
Click to collapse
http://forum.xda-developers.com/note-3-att/general/n900aucucnc2-odin-files-t2838117 for nc2
I am sorry I forgot to mention. I am unable to get Odin to recognize my phone when connected.
Do you have the phone in download mode
Yes I have my phone in download mode
Try different cable and USB slots
ryanalivingston said:
I am sorry I forgot to mention. I am unable to get Odin to recognize my phone when connected.
Click to expand...
Click to collapse
You may need to install the Sammy Drivers. If you install Kies 3 it will do it for you.
I have installed the latest Samsung drivers tried 3 or 4 different cables still no luck.
Well your best bet would be an att service center or Samsung experience booth at best buy
jerrycoffman45 said:
Well your best bet would be an att service center or Samsung experience booth at best buy
Click to expand...
Click to collapse
I have already been to the best buy and there systems couldn't find my phone
Call att you have a year warranty I assume since you factory reset the phone won't go past the Samsung boot screen the will send you a replacement for free
---------- Post added at 01:22 PM ---------- Previous post was at 01:21 PM ----------
Of course don't tell them you where rooted and flashing custom roms
jerrycoffman45 said:
Call att you have a year warranty I assume since you factory reset the phone won't go past the Samsung boot screen the will send you a replacement for free
---------- Post added at 01:22 PM ---------- Previous post was at 01:21 PM ----------
Of course don't tell them you where rooted and flashing custom roms
Click to expand...
Click to collapse
I am not in contract with at&t to go to them
ryanalivingston said:
I am not in contract with at&t to go to them
Click to expand...
Click to collapse
then if you cant get odin to see the phone your screwed sorry
jerrycoffman45 said:
then if you cant get odin to see the phone your screwed sorry
Click to expand...
Click to collapse
Thank you for trying to help.
ryanalivingston said:
Thank you for trying to help.
Click to expand...
Click to collapse
your welcome but i wasnt much help
ryanalivingston said:
Hello I need help I am using safe strap 3.72 on a at&t note 3. In my stock rom location in safe strap I have no os and I am unable flash a new rom or even restore a backup. I tried going to stock recovery to do a factory reset still unable to restore my stock rom. Is there a away to repair this problem. Please help
Click to expand...
Click to collapse
Back when our phones had jellybean, I did the exact same thing. I deleted my stock rom without installing a replacement. BIG NO NO!
Anyway, to get your phone recognized, I would install kies 3, then tools > reinstall device driver. Do this with the phone connected in download mode.
Next I would use the files found here to reinstall the stock kk rom using Odin: http://forum.xda-developers.com/note-3-att/general/n900aucucnc2-odin-files-t2838117
There is a guide on YouTube entitled "AT&T Note 3 MLG Restore Part 1" that should walk you through the process.
Please let me know if this helped.
Edit: I noticed that my fellow XDA members have recommended the same thing (except for telling kies to reinstall the drivers) As a last ditch effort, I would try a different pc running a different operating system (especially if you're using Windows 8).
---------- Post added at 05:04 AM ---------- Previous post was at 04:56 AM ----------
I took this from thedroidguy dot com.
"First Solution: This is the recommended way to make any Samsung device, in this case the Galaxy Note 3, get detected by the computer without a problem: download and install KIES. Depending on your connection, the download process may take several minutes to complete but the installation won’t take a minute. Installing KIES into your computer mean installing all necessary USB drivers as well. You can download KIES from here.
Second Solution: If you’ve already installed the KIES into your computer and it still refuses to detect the phone, reboot it and try again. If the problem persists, uninstall KIES, reboot the computer and plug the phone in. Let the computer detect the device as a general storage then install KIES again. This time, it would work.
Third Solution: If you don’t want to install KIES to your computer, you can download just the drivers. They are packed into one package and compressed to only have around 25 megabytes. You can find the download link from here.
Fourth Solution: There is also what they call the universal ADB driver that would make any Android device detectable by the computer once it’s installed. The driver was built by clockworkmod team and can be downloaded from their website."
sireniankyle said:
Back when our phones had jellybean, I did the exact same thing. I deleted my stock rom without installing a replacement. BIG NO NO!
Anyway, to get your phone recognized, I would install kies 3, then tools > reinstall device driver. Do this with the phone connected in download mode.
Next I would use the files found here to reinstall the stock kk rom using Odin: http://forum.xda-developers.com/note-3-att/general/n900aucucnc2-odin-files-t2838117
There is a guide on YouTube entitled "AT&T Note 3 MLG Restore Part 1" that should walk you through the process.
Please let me know if this helped.
Edit: I noticed that my fellow XDA members have recommended the same thing (except for telling kies to reinstall the drivers) As a last ditch effort, I would try a different pc running a different operating system (especially if you're using Windows 8).
---------- Post added at 05:04 AM ---------- Previous post was at 04:56 AM ----------
I took this from thedroidguy dot com.
"First Solution: This is the recommended way to make any Samsung device, in this case the Galaxy Note 3, get detected by the computer without a problem: download and install KIES. Depending on your connection, the download process may take several minutes to complete but the installation won’t take a minute. Installing KIES into your computer mean installing all necessary USB drivers as well. You can download KIES from here.
Second Solution: If you’ve already installed the KIES into your computer and it still refuses to detect the phone, reboot it and try again. If the problem persists, uninstall KIES, reboot the computer and plug the phone in. Let the computer detect the device as a general storage then install KIES again. This time, it would work.
Third Solution: If you don’t want to install KIES to your computer, you can download just the drivers. They are packed into one package and compressed to only have around 25 megabytes. You can find the download link from here.
Fourth Solution: There is also what they call the universal ADB driver that would make any Android device detectable by the computer once it’s installed. The driver was built by clockworkmod team and can be downloaded from their website."
Click to expand...
Click to collapse
The computer recognizes the phone just unable to get of in to recognize my phone in download mode
ryanalivingston said:
The computer recognizes the phone just unable to get of in to recognize my phone in download mode
Click to expand...
Click to collapse
Well if the phone is in download mode, and Odin is up to date, then it has to be a driver issue. My pc always acts like it's recognizing my devices, but then it screws with the drivers to where nothing works.
Thanks for all the help I don't know what will work but I will continue to try everyone's advice and hopefully something works for me. At this time I can only use the for rom slots in safe strap. Phone works great other than I am unable to use full storage space of the note 3
It might be too late to help but i had to uninstall all the drivers from the PC then put my phone in download mode, then plug it in to the pc and it would install the drive and work maybe?
Or pull your sd card our and copy over a rom to it then put it back in and boot and flash?
Related
So I was flashing a stock rom from Odin, and Odin froze, so I unplugged the phone and took out the battery. Now, when I try to get into download mode, all I get is a screen with a phone-!-computer. Even with a usb jig, it just goes to this screen. My captivate is also not recognized by the computer when I plug it in when its on the phone-!-computer screen.
cherrybombaz said:
So I was flashing a stock rom from Odin, and Odin froze, so I unplugged the phone and took out the battery. Now, when I try to get into download mode, all I get is a screen with a phone-!-computer. Even with a usb jig, it just goes to this screen. My captivate is also not recognized by the computer when I plug it in when its on the phone-!-computer screen.
Click to expand...
Click to collapse
Have you tried all the steps in the Captivate Connection Issues post (in my signature)?
Does it say something about hardware upgrade failure?
mrhaley30705 said:
Does it say something about hardware upgrade failure?
Click to expand...
Click to collapse
Nope. It just doesn't show up at all; not even in device manager and it just shows the phone exclamation computer screen.
jmtheiss said:
Have you tried all the steps in the Captivate Connection Issues post (in my signature)?
Click to expand...
Click to collapse
Yea more or less. The weird thing is it was detected before and odin was able to start the flash. But it hung after it said do not disconnect the device so I was forced to unplug it. Now I just don't see anything at all.
cherrybombaz said:
Yea more or less. The weird thing is it was detected before and odin was able to start the flash. But it hung after it said do not disconnect the device so I was forced to unplug it. Now I just don't see anything at all.
Click to expand...
Click to collapse
Have you given Heimdall a try? It sometimes works when Odin won't.
jmtheiss said:
Have you given Heimdall a try? It sometimes works when Odin won't.
Click to expand...
Click to collapse
Yep. When I try to install the heimdall driver, the phone doesn't even show up so it won't install.
cherrybombaz said:
Yep. When I try to install the heimdall driver, the phone doesn't even show up so it won't install.
Click to expand...
Click to collapse
Odd. I'm assuming you've done all the uninstalling drivers, rebooting, etc, etc?
jmtheiss said:
Odd. I'm assuming you've done all the uninstalling drivers, rebooting, etc, etc?
Click to expand...
Click to collapse
Yea I tried uninstalling and reinstalling the Odin drivers. How do I uninstall the heimdall driver?
Driver Uninstallation Instructions:
1. Put your Samsung Galaxy S Captivate (i897) into download mode by holding Volume Down + Volume Up and...
2. Plug your phone into your PC.
3. Open up Device Manager on your PC.
4. Under "Libusb (WinUSB) devices" right click on "Samsung USB Composite Device" and choose Properties.
5. Go to the Driver tab and select Uninstall.
Done
4-2ndtwin said:
Driver Uninstallation Instructions:
1. Put your Samsung Galaxy S Captivate (i897) into download mode by holding Volume Down + Volume Up and...
2. Plug your phone into your PC.
3. Open up Device Manager on your PC (Control Panel -> System -> Device Manager).
4. Under "Libusb (WinUSB) devices" right click on "Samsung USB Composite Device" and chose Properties.
5. Go to the Driver tab and select Update Driver.
6. Chose to browse your computer for the driver.
7. Chose to pick from a list of devices drivers on your computer.
8. Pick the original Samsung Composite driver, press next and then follow the prompts.
9. Done
Click to expand...
Click to collapse
The problem is I don't see my phone in device manager.
Edited my previous post. Gave u the update instead of the uninstall method, oops.
4-2ndtwin said:
Edited my previous post. Gave u the update instead of the uninstall method, oops.
Click to expand...
Click to collapse
But I don't see the Libusb tab in device manager when I plug my phone in.
When u initially installed the drivers for Heimdall, they only installed to the usb port that u were connected to. So u need to be plugged into that specific port and then u should see it in the Device Manager.
And u really don't need to uninstall the drivers that u need for Heimdall, as long as u installed them after u installed the drivers from Kies. See this post... http://forum.xda-developers.com/showpost.php?p=19998299&postcount=115
And if u have tried everything in the Stickied thread--Captivate Connection Issues and Download Mode Help to no avail, then ??
4-2ndtwin said:
When u initially installed the drivers for Heimdall, they only installed to the usb port that u were connected to. So u need to be plugged into that specific port and then u should see it in the Device Manager.
And u really don't need to uninstall the drivers that u need for Heimdall, as long as u installed them after u installed the drivers from Kies. See this post... http://forum.xda-developers.com/showpost.php?p=19998299&postcount=115
And if u have tried everything in the Stickied thread--Captivate Connection Issues and Download Mode Help to no avail, then ??
Click to expand...
Click to collapse
Yep I made a jig and it works but it doesn't go to the downloading screen with the shovel instead it just goes to the screen with the phone exclamation computer.
Then try this...may sound odd but anyway--just pull ur battery and leave it out for 5 minutes or so and then put it back in and try getting back into download mode and see what happens.
Btw, which stock odin were u trying that got u in this mess ?
4-2ndtwin said:
Then try this...may sound odd but anyway--just pull ur battery and leave it out for 5 minutes or so and then put it back in and try getting back into download mode and see what happens.
Btw, which stock odin were u trying that got u in this mess ?
Click to expand...
Click to collapse
The odin3 one click downloader. Yep I tried taking out the battery -- no go :/.
happened to my cappy yesterday. went through 7 hours to fix mine. had the same issue as yours. no download mode showing with any combo I try even recovery had 4 micro usb cables and still my pc is choosy. that screen is actually download mode. you just need the proper drivers for the pc to read it. I used the one from heimdall. tried for atleast 100x before my pc recognizes my cappy as gadget serial and then boom! after installing,uninstalling and reinstalling all is A-ok now. just try it and have faith on your cappy
gonemad02 said:
happened to my cappy yesterday. went through 7 hours to fix mine. had the same issue as yours. no download mode showing with any combo I try even recovery had 4 micro usb cables and still my pc is choosy. that screen is actually download mode. you just need the proper drivers for the pc to read it. I used the one from heimdall. tried for atleast 100x before my pc recognizes my cappy as gadget serial and then boom! after installing,uninstalling and reinstalling all is A-ok now. just try it and have faith on your cappy
Click to expand...
Click to collapse
What did you try before it was recognized? Did you just plug and replug the usb into the computer until it worked?
Mine did this before, when I accidently forgot to convert back to RFS before flashing back to stock, and I thought I was totally screwed. After this screen comes up the first time it will not go away, even if a download jig is used, until you get a good flash.
Try this:
Open your Odin, and have it ready with whatever you were trying to flash to begin with. Pull the battery on your phone, put your download jig in, and now put your battery in. It will still be the error screen that comes up. Pull your jig, and now plug your phone in. It should show on Odin now, and this flash should take correctly.
---------- Post added at 01:53 AM ---------- Previous post was at 01:50 AM ----------
Also make sure the USB port you are using is a direct link to your board. I always use one of the original USB 2 ports on the back of my computer. Not using a USB hub either, but straight from the port to your phone.
Hi, i'm noob in Galaxy Flashing so this is my problem:
I have a Samsung Galaxy S GT-I9000 blocked from italian carrier.
Few times ago i tried to enable 3-buttons download/recovery mode installing Aries_P-SBL.tar.md5 with Odin. The installation finished successfully but the download/recovery mode still didn't work.
After some reboots (where the phone worked right), now the phone stucks in the boot screen (the one with Galaxy S GT-I9000 SAMSUNG).
With the JIG i can enter download mode but my computer can't detect the phone (Windows feels my USB connection but Odin does not detect it).
If i connect the phone to the computer in normal mode (not in download mode, so with stuck screen), Kies can detect the phone but says that it can't talk with phone in this way(like if it was in USB Debug mode).
I Hope someone can help me
Restart your computer>>>Go to task manager and close all Kies applications (I usually have 2 Kies running from startup)>>>Start Odin and select all the files>>>Put your phone into download mode and connect>>>It should be detected now.
If it is still not detected, close odin, disconnect phone. Start Kies go to tools and install drivers. Once this is complete. Close Kies and start from the top of this post...restart...
Solution Is HEIMDALL.....
Here Comes your solution:
You can easily back your phone with Heimdall.
It's a flashtool which is more complicated than ODIN.
If interesting,simply PM me and we will do it.
I'm Here...
Well,first go to here:
http://forum.xda-developers.com/showthread.php?t=755265
Second: Download 7-zip PC software & extract your official md5 firmware to obtain several other files.
Third:Search the web for a Heimdall How-To(if you didn't find,I'll provide You links)
Last:You'll flash the firmware via Heimdall & again your peace of mind will be back.
Try to reflash your phone normaly with another Rom, it should work
peter_dizai said:
Here Comes your solution:
You can easily back your phone with Heimdall.
It's a flashtool which is more complicated than ODIN.
If interesting,simply PM me and we will do it.
Click to expand...
Click to collapse
Sorry, your advice didn't work, Odin still doesn't detect the phone
Try to change the USB port and install ONLY the phone driver -if you don't find you can contact me.
Inviato dal mio GT-I9000 usando Tapatalk
I don't understand, your download mode works?
Sent from my Galaxy S with ICS 4.0.4 (Italy)
he said download mode works but odin cant detect the phone .
Try reinstalling the samsung usb drivers and/or try from another pc and see if it shows the same thing (meaning nothing) .
Hi,
sorry but i tried all the ways, Odin and Heimdall.
I tried Odin on Windows and Heimdall on MacOSX but always they say
"Failed to detect compatible download-mode device."
I'm sure that phone is in download mode
May i install drivers on OSX with Heimdall?
I have not original samsung USB cable, but i think this is not a problem
Rooted my GT-I9000, and now it has crashed!
First off all my Galaxy I9000 was trying to software update via Kies, and it failed. The it would not start, but i managde to root it with a stock "VOD" rom.. But after a while i wantet to root it back to "Nordic Version"... But i could not do this, because the 3 button combo dont work on my Galaxy I9000 anymore.. :/ So there for i baought a USB JTAG, that puts it into download mode. So far, So good But when it is finished rooting, it fails to mount/unmount a bunch of stuff.. I have a picture of the screen, so that you guys can se what the problem is. I have tryed to root it with the same version that worked before, but it dont work. I have also tryed with som pit files, and so on... I give up, i need help with my Samsung Galaxy S - GT-i9000. Please help me out with this..
Getting Hopeless...?
1)For you to become sure,my Galaxy S Aka I9000 was exactly the same as yours and right now there is nothing wrong with that of course after flashing by HEIMDALL.
2)Remember,if your are going to do anything,Your first and your last key,is your HOPE so be so hopeful and let's start to get over this.
3)Download I9000 USB driver from here and simply install it on WINDOWS OS.
http://hotfile.com/dl/48893334/93383a1/I9000_USB_driver.rar.html
4)Before Using Heimdall, Enter it's folder and you'll see another sub folder called driver and you'll see just ONE executable program,run it and follow these instructions:
(I'll Shortly Provide You A How-to)
5)Enter Heimdall and follow these instructions:
(I'll Shortly Provide You A How-to)
6)Flash firmware
7)Enjoy
8)Press my THX Button.
---------- Post added at 01:15 AM ---------- Previous post was at 01:07 AM ----------
Ghoststavanger said:
First off all my Galaxy I9000 was trying to software update via Kies, and it failed. The it would not start, but i managde to root it with a stock "VOD" rom.. But after a while i wantet to root it back to "Nordic Version"... But i could not do this, because the 3 button combo dont work on my Galaxy I9000 anymore.. :/ So there for i baought a USB JTAG, that puts it into download mode. So far, So good But when it is finished rooting, it fails to mount/unmount a bunch of stuff.. I have a picture of the screen, so that you guys can se what the problem is. I have tryed to root it with the same version that worked before, but it dont work. I have also tryed with som pit files, and so on... I give up, i need help with my Samsung Galaxy S - GT-i9000. Please help me out with this..
Click to expand...
Click to collapse
Ok,Right now I'm here and you are so damn lucky.
1-Simply put your phone into download mode with your cable.
2-Change your cable with an standard Samsung cable.
3-Download a stock firmware which contains 3 files(PDA,Phone,CSC)
4-Load Odin and flash the firmware.
5-All Done,How lucky Your Are.....
6-Feel Free to hit my THANX...
peter_dizai said:
Well,first go to here:
http://forum.xda-developers.com/showthread.php?t=755265
Second: Download 7-zip PC software & extract your official md5 firmware to obtain several other files.
Third:Search the web for a Heimdall How-To(if you didn't find,I'll provide You links)
Last:You'll flash the firmware via Heimdall & again your peace of mind will be back.
Click to expand...
Click to collapse
I tried your method but heimdall says that it can not find a connected download-mode device. My device is in download mode, i put it in this mode with JIG
Hi, excuse my for my stupid question,
there are problem in flashing with non original Samsung USB cable? Isn't it the same with any Micro USB adapter??
espinho said:
Hi, excuse my for my stupid question,
there are problem in flashing with non original Samsung USB cable? Isn't it the same with any Micro USB adapter??
Click to expand...
Click to collapse
generally no, but I recommend strongly to try another micro USB-Cable & another USB Port!
No one of these method does work for me,
any suggest?? my main problem is that the pc does not detect the phone when it's in download-mode. I know how to flash it, but there is not a program that can talk with it!
Can you try to make the operation on another computer?-install usb driver first...
Sent from my Galaxy S with ICS 4.0.4 (Italy)
mrchat9 said:
Can you try to make the operation on another computer?-install usb driver first...
Sent from my Galaxy S with ICS 4.0.4 (Italy)
Click to expand...
Click to collapse
i'll try and i'll make you know
At this time maybe an operating system problem...I'm waiting for your answer!
Sent from my Galaxy S with ICS 4.0.4 (Italy)
Solved
mrchat9 said:
At this time maybe an operating system problem...I'm waiting for your answer!
Sent from my Galaxy S with ICS 4.0.4 (Italy)
Click to expand...
Click to collapse
Hi, changing computer worked. I tried on OSX and didn't work, on Windows 7 on VMware Fusion and didn't work. After all, i tried on a laptop with Windows XP and it solved my problem. Now i get a mobile network error, with one carrier it works and with another it does not. The mobile network detected is always really low.
hi
im using rooted galaxy note GTN7000 on ICS i tried to install a new rom but since than my phone stuck on Samsung galaxy note logo i tried every thing factory wipe cahche wipe but result is the same
i used odin also to flash GB rom with pit file but my phone stuck on DATAFS
is there any way to solve this problem
thanks in advance
off the phone and on again. put to download mode and install the gb rom again without the pit.
nokiamodeln91 said:
off the phone and on again. put to download mode and install the gb rom again without the pit.
Click to expand...
Click to collapse
can you please provide me the link
here you go. everything you may need
http://forum.xda-developers.com/showthread.php?t=1424997
http://forum.xda-developers.com/showthread.php?t=1424997
or
www.sammobile.com
nokiamodeln91 said:
here you go. everything you may need
http://forum.xda-developers.com/showthread.php?t=1424997
Click to expand...
Click to collapse
will try to flash that rom and reply back
Pease note: Never wipe on ics
hozef552 said:
hi
im using rooted galaxy note GTN7000 on ICS i tried to install a new rom but since than my phone stuck on Samsung galaxy note logo i tried every thing factory wipe cahche wipe but result is the same
i used odin also to flash GB rom with pit file but my phone stuck on DATAFS
is there any way to solve this problem
thanks in advance
Click to expand...
Click to collapse
My dear friend, please note you should NEVER EVER WIPE on ICS, as it is a clear guaranteed BRICK.
Please press the THANKs button if this helped you.:cyclops:
Hope your issue has been resolved.
If not, here's something that worked for me when i was stuck at galaxy note logo.
i was not even able to get into recovery mode but i was able to get into download mode.
if your computer has the drivers installed for your note,
download and uinzip the attachment ADB-files.zip
Unzip the contents to a folder and hold down shift while right clicking with the mouse. You will get an option that says "Open command window here"
In that CMD window, give the command "adb reboot recovery" and voila, phone should force reboot to recovery.
If you get Error: Device not found. It means the drivers were not installed properly OR the pc is not detecting the phone properly.
mr00realist said:
Hope your issue has been resolved.
If not, here's something that worked for me when i was stuck at galaxy note logo.
i was not even able to get into recovery mode but i was able to get into download mode.
if your computer has the drivers installed for your note,
download and uinzip the attachment ADB-files.zip
Unzip the contents to a folder and hold down shift while right clicking with the mouse. You will get an option that says "Open command window here"
In that CMD window, give the command "adb reboot recovery" and voila, phone should force reboot to recovery.
If you get Error: Device not found. It means the drivers were not installed properly OR the pc is not detecting the phone properly.[/QUOTE
my problem G-note same as ur problem.and im already download ADB files.but the pc cant detect the phone.so what shoul i do??pleasee help me.
Click to expand...
Click to collapse
You need to explain your problem a bit more. It was an old thread.
yap28 said:
my problem G-note same as ur problem.and im already download ADB files.but the pc cant detect the phone.so what shoul i do??pleasee help me.
Click to expand...
Click to collapse
Sorry but adb won't work unless the phone is detected properly by the computer.
Generally some drivers are installed in the pc with installation of kies. However when the phone is in recovery or download mode it is detected differently in the pc's device manager.
Are you able to get into download mode?
IF YES: Consider flashing a stock rom using odin
Sent from my GT-N7000 using xda app-developers app
can't update to ICS
My phone also got stuck on the Samsung GTN7000 then turns back off and on on that very same screen.
So I searched the net and ended following the thread post # 2 of this link by drKetan (thanks btw)
http://forum.xda-developers.com/showthread.php?t=1424997
But I have a few problems:
I'm located in the Philippines with an open-line Galaxy Note
It doesn't update to ICS over-the-air; I haven't tried KIES though
I lost all my contacts and software (but it's ok)
I just need to bring back my old familiar interface using ICS or if possible, Jelly bean (if it's stable)
Android version: 2.3.6
Baseband Version: N7000XXLA4
Kernel Version: 2.6.35.7-N7000ZSLA2-CL899610
I appreciate the help.
---------- Post added at 11:07 PM ---------- Previous post was at 10:36 PM ----------
Did I download the correct ROM? (it was "Hongkong", when I am in the Philippines should I have downloaded a different country?)
If you have access to pc, install Kies on it and connect the phone. Check what it says. You may need to manually select the correct csc using the code *#272*IMEI#. This will wipe the phone. So make sure you make a backup of imp stuff.
nokiamodeln91 said:
If you have access to pc, install Kies on it and connect the phone. Check what it says. You may need to manually select the correct csc using the code *#272*IMEI#. This will wipe the phone. So make sure you make a backup of imp stuff.
Click to expand...
Click to collapse
I think I should've downloaded the ROM with the "DX" code in it (where Philippines country falls), instead of the "ZS" (Hongkong).. hence, I will first try what you mentioned. So there's no chance I could get my old contacts back eh?
btw, how can I "thank" you?
If you had synced it with Google or ever made a backup, you could restore it.
You could try the code. If there is no Philippines, the you can go to samfirmware.com and download the firmware you want. There's Philippines (Globe, Smart, Sun) firmwares. I don't know which is what but you may. You can flash the ICS rom directly using PC odin. Just be sure not to wipe or factory reset on stock ICS kernels.
---------- Post added at 11:04 PM ---------- Previous post was at 11:04 PM ----------
And you have already thanked me.
I'm trying to connect my S-5830L to my PC, and when I do, the phone charges, but there is no option to access mass storage.
It's recognized in Kies, I even update the phone with it, and a hidden removable disk appears when I connect the phone, yet I still can't access the storage.
I tried installing both the driving independently and via Kies.
There is no notification about it in the phone, and I have USB debugging turned on, and I also tried with it off
Anyone knows what I could be doing wrong?
ZeroAE said:
I'm trying to connect my S-5830L to my PC, and when I do, the phone charges, but there is no option to access mass storage.
It's recognized in Kies, I even update the phone with it, and a hidden removable disk appears when I connect the phone, yet I still can't access the storage.
I tried installing both the driving independently and via Kies.
There is no notification about it in the phone, and I have USB debugging turned on, and I also tried with it off
Anyone knows what I could be doing wrong?
Click to expand...
Click to collapse
Was the USB Mass Storage working earlier in your PC? What rom do you use? Is your phone rooted?
mahithm said:
Was the USB Mass Storage working earlier in your PC? What rom do you use? Is your phone rooted?
Click to expand...
Click to collapse
No, a guy I know passed me this phone, and I haven't be able to use the mass storage since the beginning. It's using stock (in fact, I just updated it via Kies), I have never tweaked it before. And no, it seems it isn't rooted.
ZeroAE said:
No, a guy I know passed me this phone, and I haven't be able to use the mass storage since the beginning. It's using stock (in fact, I just updated it via Kies), I have never tweaked it before. And no, it seems it isn't rooted.
Click to expand...
Click to collapse
Go to Recovery Mod and do a "Wipe Data/ Factory Reset" & "Wipe Cache Partition". That should pretty much solve the issue. But if the issue still exists, try flashing the stock rom using odin. Here is the link on how to install stock rom using odin along with all firmwares,
Flash stock rom on Samsung Galaxy Ace S5830 using odin
Once installed, go to Recovery Mod and do a "Wipe Data/ Factory Reset" & "Wipe Cache Partition" (otherwise bootloop might occur). Then restart. Now you have successfully flashed the stock rom. Here is the link for rooting and installing CWM 5 on Samsung Galaxy Ace,
How To Root and Unroot Samsung Galaxy Ace?
CWM 5.0.2.6 fix for Samsung Galaxy Ace S5830
Do post your results. Hope I Helped
It appears I'll have to flash the stock rom, since wiping the data and cache didn't work.
But does it matter which version of ODIN I use?
The one I'm supposed to use doesn't recognize the phone, but the one I used for the Galaxy S4 and S2 do recognize the phone.
might be problem with your samsung mobile driver on your pc.
I have faced same problem.
connect your mobile to pc right click on my computer icon go to manage-device manger
check whether driver is working if not try to reinstall it
ZeroAE said:
It appears I'll have to flash the stock rom, since wiping the data and cache didn't work.
But does it matter which version of ODIN I use?
The one I'm supposed to use doesn't recognize the phone, but the one I used for the Galaxy S4 and S2 do recognize the phone.
Click to expand...
Click to collapse
I completely agree with @amtdwan. It's most probably the drivers that's causing the problem. Updating/ reinstalling it will solve it
I removed the ones that Windows install automatically, and reinstalled the Kies ones, but each time I connect the phone to my PC, Windows install the drivers again.
Is that a problem?
Also, the USB utilities setting is greyed out. And I can't seem to open the file explorer with Kies, it says "drive not valid".
ZeroAE said:
I removed the ones that Windows install automatically, and reinstalled the Kies ones, but each time I connect the phone to my PC, Windows install the drivers again.
Is that a problem?
Also, the USB utilities setting is greyed out. And I can't seem to open the file explorer with Kies, it says "drive not valid".
Click to expand...
Click to collapse
BTW does "Turn on USB Storage" pop up now in your phone when you connect it to PC? If yes click it, then can you try opening using Windows file explorer rather than Kies? Do post the result. Hope I Helped
mahithm said:
BTW does "Turn on USB Storage" pop up now in your phone when you connect it to PC? If yes click it, then can you try opening using Windows file explorer rather than Kies? Do post the result. Hope I Helped
Click to expand...
Click to collapse
Nope, it doesn't =(
ZeroAE said:
Nope, it doesn't =(
Click to expand...
Click to collapse
Which version of odin are you using?
mahithm said:
Which version of odin are you using?
Click to expand...
Click to collapse
I'm trying to use 'Odin Multi Downloader V.4.42", but it doesn't recognize the phone.
But when I try to use Odin3 V1.85 or Odin3 V3.09, it recognizes it.
ZeroAE said:
I'm trying to use 'Odin Multi Downloader V.4.42", but it doesn't recognize the phone.
But when I try to use Odin3 V1.85 or Odin3 V3.09, it recognizes it.
Click to expand...
Click to collapse
Each device has its own odin. For Samsung Galaxy Ace S5830, the most stable odin is S5830 Odin Multi Downloader v4.38. You can find this in the link mentioned previously. I will provide the same the link again. Go to the "Preparation" section where you will find all the necessary downloads including the drivers.
Flash stock rom on Samsung Galaxy Ace S5830 using odin
Can you try this version of odin with the drivers mentioned above and see if it works? Do post the results. Hope I Helped
mahithm said:
Each device has its own odin. For Samsung Galaxy Ace S5830, the most stable odin is S5830 Odin Multi Downloader v4.38. You can find this in the link mentioned previously. I will provide the same the link again. Go to the "Preparation" section where you will find all the necessary downloads including the drivers.
Flash stock rom on Samsung Galaxy Ace S5830 using odin
Can you try this version of odin with the drivers mentioned above and see if it works? Do post the results. Hope I Helped
Click to expand...
Click to collapse
I was able to flash the phone using your steps, but it still doesn't open in explorer.
I guess I'm giving up, since nothing I've tried worked.
Thanks anyways, mahithm.
ZeroAE said:
I was able to flash the phone using your steps, but it still doesn't open in explorer.
I guess I'm giving up, since nothing I've tried worked.
Thanks anyways, mahithm.
Click to expand...
Click to collapse
So does "Turn on USB Storage" pop up now in your phone when you connect it to PC? Did you use the firmware from the site I mentioned? This problem could be caused if you have a faulty firmware. Also make sure you have a working sdcard. Sometimes faulty sdcard also cause such errors. Last but no the least, you can use the USBMassStorage app I developed. For it to work, you need a rooted phone. I'll provide you all the necessary link. Don't forget to read all the guidelines before using the app.
How To Root and Unroot Samsung Galaxy Ace?
CWM 5.0.2.6 fix for Samsung Galaxy Ace S5830
USBMassStorage App for Samsung Galaxy Ace S5830
I hope this solution works. Also we at XDA Developers are always happy to help our fellow comrade in trouble
does your pc shows
device is not recognize by windows
Hi all...I have a very big problem. when I plug my tab into my pc it recognizes it with no problem until I try it in download mode the I get a message saying that my usb port has malfunctioned. Then I switch back to any other mode and its connects again with no problem until. I don't know what to do. I'm 2.2 and rooted but just want to install cwm or twrp recovery, update to 2.3 gingerbread and maybe flash a Rom. I can't connect to odin or the other when in download mode but they recognize it in regular mode with no problem. Please any help will do.
Can you stop Kies?
Or uninstall it, and only install Samsung usb driver.
Sent from my GT-N7100 using XDA Free mobile app
priyana said:
Can you stop Kies?
Or uninstall it, and only install Samsung usb driver.
Sent from my GT-N7100 using XDA Free mobile app
Click to expand...
Click to collapse
I don't have Kies anymore. I tried that a few weeks back trying to find a solution for this same problem.
lordhavmercy said:
I don't have Kies anymore. I tried that a few weeks back trying to find a solution for this same problem.
Click to expand...
Click to collapse
how about using different USB port? And the reinstall usb driver?
priyana said:
how about using different USB port? And the reinstall usb driver?
Click to expand...
Click to collapse
I have most def tried that but no good. I'm stumped, I wish it was some way to install a recovery from my sdcard.
I guess you only have 3 (or 4) options to try:
- try heimdall
- try on another PC
- boot a livecd linux and and install heimdall on it.
(if you have a spare hard disk, just remove the current one, and stick a new disk and install a clean OS)
priyana said:
I guess you only have 3 (or 4) options to try:
- try heimdall
- try on another PC
- boot a livecd linux and and install heimdall on it.
(if you have a spare hard disk, just remove the current one, and stick a new disk and install a clean OS)
Click to expand...
Click to collapse
Sounds like I really only have 2 options
1. Try another computer because I've tried Heimdall and it's the same as Odin. It connects to both when in normal mode or even Samsungs recovery mode but when i put it in download mode, it's a no go.
2. Just stay on a rooted 2.2 (which sucks)
Are you using the original cable?
Heard of some issue with non original, but I have a non original that works for me.
Also,
- factory reset, then boot to download mode, start Odin on PC, then lastly, connect the tab
- or may worth going to Device Manager, uninstall the driver, and delete the device (not sure if that is doable, not in front of a Microsoft OS), then click the scan for changes again to let it detect.
priyana said:
Are you using the original cable?
Heard of some issue with non original, but I have a non original that works for me.
Also,
- factory reset, then boot to download mode, start Odin on PC, then lastly, connect the tab
- or may worth going to Device Manager, uninstall the driver, and delete the device (not sure if that is doable, not in front of a Microsoft OS), then click the scan for changes again to let it detect.
Click to expand...
Click to collapse
Sounds like that factory reset option might work, I'm going to try that when I get home around 10:30. I'll let you know how it goes.
update.....well I tried the factory reset plan and it didn't work....In download mode I still get the same message stating that one of my usb ports have malfunctioned. I'm going to try it from another computer tomorrow.....hopefully the problem is with my computer and not the device.
priyana said:
Are you using the original cable?
Heard of some issue with non original, but I have a non original that works for me.
Also,
- factory reset, then boot to download mode, start Odin on PC, then lastly, connect the tab
- or may worth going to Device Manager, uninstall the driver, and delete the device (not sure if that is doable, not in front of a Microsoft OS), then click the scan for changes again to let it detect.
Click to expand...
Click to collapse
I wonder if i can use adb to install cwm or twrp recovery......or if I can flash without being in download mode
Hi. I have similar problem like lordhavmercy. When I connect tablet with PC on download mode and start Odin there is no yellow COM field just blank white field. My PC recognize it as a Samsung USB Composite Device:
http://prntscr.com/3p9hhu
Tablet (P1000) are on 2.2 Froyo and I think it is rooted. Somewhere I have read that if there Superuser icon that means it is rooted. I have Superuser Icon and that aplication look like this:
http://prntscr.com/3p9o2h
Is anyone have solution?