[q] bootloop samsung galaxy s3 mini - Galaxy S III Mini Q&A, Help & Troubleshooting

hello i have my samsung galaxy mini s3 (gt-I8190) i've search and follow solution in this threads CLICK ME and this CLICK ME i use odin and i says something like this in every procedure/ tutorial i follow "OSM> All threads completed. (succeed 1 / failed 0)" and i thought its fixed but still my phone is BOOTLOOPING and i even try to WIPE it using this CLICK ME after wiping it i install another new OS and its still looping
i even try the "3 button enable" and after flashing it and pressing the power but+up vol+home but the stock recovery wont show up

Related

[Q] HELP My Galaxy Tab is stuck on "Software Update Fail"

Hi....
I just tried to flash my Galaxy Tab and during the flashing my usb stoped working not sure why now only thing I get on my Tab is this...
Software Update Fail
I cant turn it of, I cant go into bootloader I am just stuck there how can I fix it?
Kind regards,
Not only does your device fail but you do also!
Read HERE!
"Question" go in Q&A not dev forum.

[Q] tried to install TWRP on galaxy ace now wont boot

Hey. Im not sure if there is a thread similar to this or not, I tried looking around and cant see any. The one i did see, was for a tablet.
Here goes....
I have a Samsung Galaxy Ace S5830i. It has gingerbread on. I rooted it 2 days ago as eventually I want to install JB onto it. I Tried to install TWRP (TWRP-2.4.1.0-cooper) onto my device, then rebooted after a 'successful' install. Only when I reboot, even now, it doesnt boot up. It gets to the Samsung screen, then stays there. Left it all night ( 12 hours or so ) and checked this morning, still the same.
HERE IS HOW I DID IT:
1. Rebooted into Recovery ( by holding Volume Up + Home + Power )
2. Apply update from sdcard
3. Scrolled to the file (TWRP-2.4.1.0-cooper)
4. Said successfully installed and rebooted.
I then swapped SD Card with another phone so i could remove this file of the Samsung phone, and replace with with recovery-clockwork-5.0.2.6-galaxyace-fix then put the SD Card back into samsung.
SOOO, today I tried the same procedure, but with another custom recovery (recovery-clockwork-5.0.2.6-galaxyace-fix) and now I get this messages:
E:Error in /tmp/sideload/package.zip
I have even used ODIN, and tried to flash that way, BUT IT SAYS MY PHONE IS NOT CONNECTED.
All I want to do now is be able to boot, NORMALLY so i can access my phone again. My phone is on contract, so I cant send it back as it has been rooted.
PLEASE HELP.
thanks in advance.
P.S ON THE ACTUAL RECOVERY PAGE, I GET THIS ERROR MESSAGE:
E:failed to mount /system (Invalid argument)
AW: [Q] tried to install TWRP on galaxy ace now wont boot
Dont think those recoveries are for s5830i
Theyre for the s5830.
Correct me if im wrong
Sent from my GT-S5830 using xda app-developers app
回覆: [Q] tried to install TWRP on galaxy ace now wont boot
s5830i....lol....hard brick....I'm feeling sry for u
Btw wrong section
從我使用 Tapatalk 2 的 GT-S5830 發送
If u can enter download or recovery mode..then your device is not hard bricked..
And u own a cooper-ve(Galaxy Ace i 5830) then u flashing wrong recovery ..
Go to Galaxy Ace i 5830 development and install a suitable recovery..n then proceed..
Stopped reading after I read the first para
Your device is completely f-ed up and there is no way of recovering it except for service center/jtag

Need Help With Samsung S3 Mini GT-I8190N

Hi. I have a samsung galaxy S3 mini gt-i8190n.When I turn it on, it stuck at "Samsung Galaxy S3 Mini GT-I8190N" logo before it turn off and loop just at the boot up logo. When I try to acces recovery, it work only until the android logo before it turn off and loop at the same samsung galaxy s3 mini gt-i8190n logo. I try to re-flash it with Odin3, it shows pass, but the problem still happen. The same happen when I flash recovery. Please help me. Urgent..
Didly said:
Hi. I have a samsung galaxy S3 mini gt-i8190n.When I turn it on, it stuck at "Samsung Galaxy S3 Mini GT-I8190N" logo before it turn off and loop just at the boot up logo. When I try to acces recovery, it work only until the android logo before it turn off and loop at the same samsung galaxy s3 mini gt-i8190n logo. I try to re-flash it with Odin3, it shows pass, but the problem still happen. The same happen when I flash recovery. Please help me. Urgent..
Click to expand...
Click to collapse
Did you try with pit file?
NeoLogY said:
Did you try with pit file?
Click to expand...
Click to collapse
I already try the goldenxxx.pit. But fail.. Any other option or maybe original pit file for this model?
Sometimes if you're really lucky and the bootloader is still working you can get to Odin download, flash the PhilZ touch or TWRP, then reformat the /data partition as ext4. That should and shouldn't work, but there's no way to damage it worse doing a last try.

No Reboot after MM 6.0.1. Flash via Odin (Samsung Galaxy Tab S2 9.7 LTE)

The device is/was a still pretty clean SM-T815 via DT Telekom. No root etc. before I decided to upgrade to MM
Downloaded firmware here: http://www.sammobile.com/firmwares/download/70049/T815XXU2BPD6_T815OXA2BPD6_DBT/
Followed instructions, incl. enabling USB Debugging on device and installing Samsung USB driver on PC.
Installed Odin and started ... however: the instructions for Odin I used did NOT ask me to tick autoreboot, so I did not. By now I have seen others who suggest to do so ...
Anyway: Got green pass from Odin and message "All threads completed. (succeed 1 / failed 0)" . All good on my PC screen
But unfortunately the device is now stuck displaying: "Downloading do not turn off target!" - Progressbar is at 99.9% (by the looks)
I'm in that situation for over 8 hours now - PLEASE HELP
Gigaherx said:
The device is/was a still pretty clean SM-T815 via DT Telekom. No root etc. before I decided to upgrade to MM
Downloaded firmware here: http://www.sammobile.com/firmwares/download/70049/T815XXU2BPD6_T815OXA2BPD6_DBT/
Followed instructions, incl. enabling USB Debugging on device and installing Samsung USB driver on PC.
Installed Odin and started ... however: the instructions for Odin I used did NOT ask me to tick autoreboot, so I did not. By now I have seen others who suggest to do so ...
Anyway: Got green pass from Odin and message "All threads completed. (succeed 1 / failed 0)" . All good on my PC screen
But unfortunately the device is now stuck displaying: "Downloading do not turn off target!" - Progressbar is at 99.9% (by the looks)
I'm in that situation for over 8 hours now - PLEASE HELP
Click to expand...
Click to collapse
I would try to reboot to system. If you are stuck in download mode, hold home-volume down-and power button. When screen goes blank, let go of all buttons. See if it boots to system (might take several minutes). If that doesn't work, I would try to re-flash with odin with auto-reboot checked.
Just hold POWER + VOL DOWN until it reboots is all that is required.
Thanx
Thank you to both of you - this was what I have been looking for. Everything as should after reboot.

Please Help Me, My Samsung s3 mini getting error after install TWRP

I hope you guys can help me to solve my problem
First, My Samsung S3 Mini GT-I8190 get bootlop
1. So i try install TWRP Recovery Using Odin
2. And my phone restart automatically
3. After samsung S3 logo, there's just a second frame of TWRP mode and Back again to Samsung S3 mode logo, and continues repeat like that
4. I Unplug my battery try to go recovery mode,But I can't go to there, Just happen like no.3
5. I tried install another version of TWRP 2x using odin, but still happen like no.3
6. I decide to install firmware using odin, when process just less then 1 minute, my phone automatically restart and always happen like no.3, odin says removed, so the process failed
I have no idea about this problem, i've spend one day to solve this problem
Hope u guys have the solution, sorry for my bad english
Try to flash a pit file.

Categories

Resources